Overlayfs's volatile option allows the user to bypass all forced sync calls
to the upperdir filesystem. This comes at the cost of safety. We can never
ensure that the user's data is intact, but we can make a best effort to
expose whether or not the data is likely to be in a bad state.
The best way to handle this in the time being is that if an overlayfs's
upperdir experiences an error after a volatile mount occurs, that error
will be returned on fsync, fdatasync, sync, and syncfs. This is
contradictory to the traditional behaviour of VFS which fails the call
once, and only raises an error if a subsequent fsync error has occurred,
and been raised by the filesystem.
One awkward aspect of the patch is that we have to manually set the
superblock's errseq_t after the sync_fs callback as opposed to just
returning an error from syncfs. This is because the call chain looks
something like this:
sys_syncfs ->
sync_filesystem ->
__sync_filesystem ->
/* The return value is ignored here
sb->s_op->sync_fs(sb)
_sync_blockdev
/* Where the VFS fetches the error to raise to userspace */
errseq_check_and_advance
Because of this we call errseq_set every time the sync_fs callback occurs.
Due to the nature of this seen / unseen dichotomy, if the upperdir is an
inconsistent state at the initial mount time, overlayfs will refuse to
mount, as overlayfs cannot get a snapshot of the upperdir's errseq that
will increment on error until the user calls syncfs.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: c86243b090 ("ovl: provide a mount option "volatile"")
Cc: stable@vger.kernel.org
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Optionally allow using "user.overlay." namespace instead of
"trusted.overlay."
This is necessary for overlayfs to be able to be mounted in an unprivileged
namepsace.
Make the option explicit, since it makes the filesystem format be
incompatible.
Disable redirect_dir and metacopy options, because these would allow
privilege escalation through direct manipulation of the
"user.overlay.redirect" or "user.overlay.metacopy" xattrs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
This replaces uuid with null in overlayfs file handles and thus relaxes
uuid checks for overlay index feature. It is only possible in case there is
only one filesystem for all the work/upper/lower directories and bare file
handles from this backing filesystem are unique. In other case when we have
multiple filesystems lets just fallback to "uuid=on" which is and
equivalent of how it worked before with all uuid checks.
This is needed when overlayfs is/was mounted in a container with index
enabled (e.g.: to be able to resolve inotify watch file handles on it to
paths in CRIU), and this container is copied and started alongside with the
original one. This way the "copy" container can't have the same uuid on the
superblock and mounting the overlayfs from it later would fail.
That is an example of the problem on top of loop+ext4:
dd if=/dev/zero of=loopbackfile.img bs=100M count=10
losetup -fP loopbackfile.img
losetup -a
#/dev/loop0: [64768]:35 (/loop-test/loopbackfile.img)
mkfs.ext4 loopbackfile.img
mkdir loop-mp
mount -o loop /dev/loop0 loop-mp
mkdir loop-mp/{lower,upper,work,merged}
mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\
upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged
umount loop-mp/merged
umount loop-mp
e2fsck -f /dev/loop0
tune2fs -U random /dev/loop0
mount -o loop /dev/loop0 loop-mp
mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\
upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged
#mount: /loop-test/loop-mp/merged:
#mount(2) system call failed: Stale file handle.
If you just change the uuid of the backing filesystem, overlay is not
mounting any more. In Virtuozzo we copy container disks (ploops) when
create the copy of container and we require fs uuid to be unique for a new
container.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Container folks are complaining that dnf/yum issues too many sync while
installing packages and this slows down the image build. Build requirement
is such that they don't care if a node goes down while build was still
going on. In that case, they will simply throw away unfinished layer and
start new build. So they don't care about syncing intermediate state to the
disk and hence don't want to pay the price associated with sync.
So they are asking for mount options where they can disable sync on overlay
mount point.
They primarily seem to have two use cases.
- For building images, they will mount overlay with nosync and then sync
upper layer after unmounting overlay and reuse upper as lower for next
layer.
- For running containers, they don't seem to care about syncing upper layer
because if node goes down, they will simply throw away upper layer and
create a fresh one.
So this patch provides a mount option "volatile" which disables all forms
of sync. Now it is caller's responsibility to throw away upper if system
crashes or shuts down and start fresh.
With "volatile", I am seeing roughly 20% speed up in my VM where I am just
installing emacs in an image. Installation time drops from 31 seconds to 25
seconds when nosync option is used. This is for the case of building on top
of an image where all packages are already cached. That way I take out the
network operations latency out of the measurement.
Giuseppe is also looking to cut down on number of iops done on the disk. He
is complaining that often in cloud their VMs are throttled if they cross
the limit. This option can help them where they reduce number of iops (by
cutting down on frequent sync and writebacks).
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ofs->upper_mnt is copied to ->layers[0].mnt and ->layers[0].trap could be
used instead of a separate ->upperdir_trap.
Split the lowerdir option early to get the number of layers, then allocate
the ->layers array, and finally fill the upper and lower layers, as before.
Get rid of path_put_init() in ovl_lower_dir(), since the only caller will
take care of that.
[Colin Ian King] Fix null pointer dereference on null stack pointer on
error return found by Coverity.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Share inode with different whiteout files for saving inode and speeding up
delete operation.
If EMLINK is encountered when linking a shared whiteout, create a new one.
In case of any other error, disable sharing for this super block.
Note: ofs->whiteout is protected by inode lock on workdir.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is no reason to deplete the system's global get_next_ino() pool for
overlay non-persistent inode numbers and there is no reason at all to
allocate non-persistent inode numbers for non-directories.
For non-directories, it is much better to leave i_ino the same as real
i_ino, to be consistent with st_ino/d_ino.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes ovl_lower_uuid_ok() to correctly detect the corner case:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case, bad_uuid would not have been set for B, because the check
only involved the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We check for conflicting (and null) uuid among all lower layers, including
those layers that are on the same fs as the upper layer.
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename lower_fs[] array to fs[], extend its size by one and use index fsid
(instead of fsid-1) to access the fs[] array.
Initialize fs[0] with upper fs values. fsid 0 is reserved even with lower
only overlay, so fs[0] remains null in this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No code uses the sb returned from this helper, so make it retrun a boolean
and rename it to ovl_same_fs().
The xino mode is irrelevant when all layers are on same fs, so instead of
describing samefs with mode OVL_XINO_OFF, use a new xino_mode state, which
is 0 in the case of samefs, -1 in the case of xino=off and > 0 with xino
enabled.
Create a new helper ovl_same_dev(), to use instead of the common check for
(ovl_same_fs() || xinobits).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename lower_layers[] array to layers[], extend its size by one and
initialize layers[0] with upper layer values. Lower layers are now
addressed with index 1..numlower. layers[0] is reserved even with lower
only overlay.
[SzM: replace ofs->numlower with ofs->numlayer, the latter's value is
incremented by one]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the past, overlayfs required that lower fs have non null uuid in
order to support nfs export and decode copy up origin file handles.
Commit 9df085f3c9 ("ovl: relax requirement for non null uuid of
lower fs") relaxed this requirement for nfs export support, as long
as uuid (even if null) is unique among all lower fs.
However, said commit unintentionally also relaxed the non null uuid
requirement for decoding copy up origin file handles, regardless of
the unique uuid requirement.
Amend this mistake by disabling decoding of copy up origin file handle
from lower fs with a conflicting uuid.
We still encode copy up origin file handles from those fs, because
file handles like those already exist in the wild and because they
might provide useful information in the future.
There is an unhandled corner case described by Miklos this way:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case bad_uuid won't be set for B, because the check only
involves the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We will deal with this corner case later.
Reported-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/
Fixes: 9df085f3c9 ("ovl: relax requirement for non null uuid ...")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Once upon a time, commit 2cac0c00a6 ("ovl: get exclusive ownership on
upper/work dirs") in v4.13 added some sanity checks on overlayfs layers.
This change caused a docker regression. The root cause was mount leaks
by docker, which as far as I know, still exist.
To mitigate the regression, commit 85fdee1eef ("ovl: fix regression
caused by exclusive upper/work dir protection") in v4.14 turned the
mount errors into warnings for the default index=off configuration.
Recently, commit 146d62e5a5 ("ovl: detect overlapping layers") in
v5.2, re-introduced exclusive upper/work dir checks regardless of
index=off configuration.
This changes the status quo and mount leak related bug reports have
started to re-surface. Restore the status quo to fix the regressions.
To clarify, index=off does NOT relax overlapping layers check for this
ovelayfs mount. index=off only relaxes exclusive upper/work dir checks
with another overlayfs mount.
To cover the part of overlapping layers detection that used the
exclusive upper/work dir checks to detect overlap with self upper/work
dir, add a trap also on the work base dir.
Link: https://github.com/moby/moby/issues/34672
Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/
Link: https://github.com/containers/libpod/issues/3540
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Colin Walters <walters@verbum.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Overlapping overlay layers are not supported and can cause unexpected
behavior, but overlayfs does not currently check or warn about these
configurations.
User is not supposed to specify the same directory for upper and
lower dirs or for different lower layers and user is not supposed to
specify directories that are descendants of each other for overlay
layers, but that is exactly what this zysbot repro did:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Moving layer root directories into other layers while overlayfs
is mounted could also result in unexpected behavior.
This commit places "traps" in the overlay inode hash table.
Those traps are dummy overlay inodes that are hashed by the layers
root inodes.
On mount, the hash table trap entries are used to verify that overlay
layers are not overlapping. While at it, we also verify that overlay
layers are not overlapping with directories "in-use" by other overlay
instances as upperdir/workdir.
On lookup, the trap entries are used to verify that overlay layers
root inodes have not been moved into other layers after mount.
Some examples:
$ ./run --ov --samefs -s
...
( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt
mount -o bind base/lower lower
mount -o bind base/upper upper
mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w)
$ umount mnt
$ mount -t overlay none mnt ...
-o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w
[ 94.434900] overlayfs: overlapping upperdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w
[ 151.350132] overlayfs: conflicting lowerdir path
mount: none is already mounted or mnt busy
$ mount -t overlay none mnt ...
-o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w
[ 201.205045] overlayfs: overlapping lowerdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w
$ mv base/upper/0/ base/lower/
$ find mnt/0
mnt/0
mnt/0/w
find: 'mnt/0/w/work': Too many levels of symbolic links
find: 'mnt/0/u': Too many levels of symbolic links
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now ovl_inode stores inode pointer for lower inode. This helps with
quickly getting lower inode given overlay inode (ovl_inode_lower()).
Now with metadata only copy-up, we can have metacopy inode in middle layer
as well and inode containing data can be different from ->lower. I need to
be able to open the real file in ovl_open_realfile() and for that I need to
quickly find the lower data inode.
Hence store lower data inode also in ovl_inode. Also provide an helper
ovl_inode_lowerdata() to access this field.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
By default metadata only copy up is disabled. Provide a mount option so
that users can choose one way or other.
Also provide a kernel config and module option to enable/disable metacopy
feature.
metacopy feature requires redirect_dir=on when upper is present.
Otherwise, it requires redirect_dir=follow atleast.
As of now, metacopy does not work with nfs_export=on. So if both
metacopy=on and nfs_export=on then nfs_export is disabled.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With mount option "xino=on", mounter declares that there are enough
free high bits in underlying fs to hold the layer fsid.
If overlayfs does encounter underlying inodes using the high xino
bits reserved for layer fsid, a warning will be emitted and the original
inode number will be used.
The mount option name "xino" goes after a similar meaning mount option
of aufs, but in overlayfs case, the mapping is stateless.
An example for a use case of "xino=on" is when upper/lower is on an xfs
filesystem. xfs uses 64bit inode numbers, but it currently never uses the
upper 8bit for inode numbers exposed via stat(2) and that is not likely to
change in the future without user opting-in for a new xfs feature. The
actual number of unused upper bit is much larger and determined by the xfs
filesystem geometry (64 - agno_log - agblklog - inopblog). That means
that for all practical purpose, there are enough unused bits in xfs
inode numbers for more than OVL_MAX_STACK unique fsid's.
Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode
numbers are allocated sequentially since boot, so they will practially
never use the high inode number bits.
For compatibility with applications that expect 32bit inodes, the feature
can be disabled with "xino=off". The option "xino=auto" automatically
detects underlying filesystem that use 32bit inodes and enables the
feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of
the same name, determine if the default mode for overlayfs mount is
"xino=auto" or "xino=off".
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On 64bit systems, when overlay layers are not all on the same fs, but
all inode numbers of underlying fs are not using the high bits, use the
high bits to partition the overlay st_ino address space. The high bits
hold the fsid (upper fsid is 0). This way overlay inode numbers are unique
and all inodes use overlay st_dev. Inode numbers are also persistent
for a given layer configuration.
Currently, our only indication for available high ino bits is from a
filesystem that supports file handles and uses the default encode_fh()
operation, which encodes a 32bit inode number.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of allocating an anonymous bdev per lower layer, allocate
one anonymous bdev per every unique lower fs that is different than
upper fs.
Every unique lower fs is assigned an fsid > 0 and the number of
unique lower fs are stored in ofs->numlowerfs.
The assigned fsid is stored in the lower layer struct and will be
used also for inode number multiplexing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We need to make some room in struct ovl_entry to store information
about redirected ancestors for NFS export, so cram two booleans as
bit flags.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Introduce the "nfs_export" config, module and mount options.
The NFS export feature depends on the "index" feature and enables two
implicit overlayfs features: "index_all" and "verify_lower".
The "index_all" feature creates an index on copy up of every file and
directory. The "verify_lower" feature uses the full index to detect
overlay filesystems inconsistencies on lookup, like redirect from
multiple upper dirs to the same lower dir.
NFS export can be enabled for non-upper mount with no index. However,
because lower layer redirects cannot be verified with the index, enabling
NFS export support on an overlay with no upper layer requires turning off
redirect follow (e.g. "redirect_dir=nofollow").
The full index may incur some overhead on mount time, especially when
verifying that lower directory file handles are not stale.
NFS export support, full index and consistency verification will be
implemented by following patches.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Store the fs root layer index inside ovl_layer struct, so we can
get the root fs layer index from merge dir lower layer instead of
find it with ovl_find_layer() helper.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs is following redirects even when redirects are disabled. If this
is unintentional (probably the majority of cases) then this can be a
problem. E.g. upper layer comes from untrusted USB drive, and attacker
crafts a redirect to enable read access to otherwise unreadable
directories.
If "redirect_dir=off", then turn off following as well as creation of
redirects. If "redirect_dir=follow", then turn on following, but turn off
creation of redirects (which is what "redirect_dir=off" does now).
This is a backward incompatible change, so make it dependent on a config
option.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull overlayfs updates from Miklos Szeredi:
- Report constant st_ino values across copy-up even if underlying
layers are on different filesystems, but using different st_dev
values for each layer.
Ideally we'd report the same st_dev across the overlay, and it's
possible to do for filesystems that use only 32bits for st_ino by
unifying the inum space. It would be nice if it wasn't a choice of 32
or 64, rather filesystems could report their current maximum (that
could change on resize, so it wouldn't be set in stone).
- miscellaneus fixes and a cleanup of ovl_fill_super(), that was long
overdue.
- created a path_put_init() helper that clears out the pointers after
putting the ref.
I think this could be useful elsewhere, so added it to <linux/path.h>
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (30 commits)
ovl: remove unneeded arg from ovl_verify_origin()
ovl: Put upperdentry if ovl_check_origin() fails
ovl: rename ufs to ofs
ovl: clean up getting lower layers
ovl: clean up workdir creation
ovl: clean up getting upper layer
ovl: move ovl_get_workdir() and ovl_get_lower_layers()
ovl: reduce the number of arguments for ovl_workdir_create()
ovl: change order of setup in ovl_fill_super()
ovl: factor out ovl_free_fs() helper
ovl: grab reference to workbasedir early
ovl: split out ovl_get_indexdir() from ovl_fill_super()
ovl: split out ovl_get_lower_layers() from ovl_fill_super()
ovl: split out ovl_get_workdir() from ovl_fill_super()
ovl: split out ovl_get_upper() from ovl_fill_super()
ovl: split out ovl_get_lowerstack() from ovl_fill_super()
ovl: split out ovl_get_workpath() from ovl_fill_super()
ovl: split out ovl_get_upperpath() from ovl_fill_super()
ovl: use path_put_init() in error paths for ovl_fill_super()
vfs: add path_put_init()
...
Generate unique values of st_dev per lower layer for non-samefs
overlay mount. The unique values are obtained by allocating anonymous
bdevs for each of the lowerdirs in the overlayfs instance.
The anonymous bdev is going to be returned by stat(2) for lowerdir
non-dir entries in non-samefs case.
[amir: split from ovl_getattr() and re-structure patches]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Define new structures to represent overlay instance lower layers and
overlay merge dir lower layers to make room for storing more per layer
information in-memory.
Instead of keeping the fs instance lower layers in an array of struct
vfsmount, keep them in an array of new struct ovl_layer, that has a
pointer to struct vfsmount.
Instead of keeping the dentry lower layers in an array of struct path,
keep them in an array of new struct ovl_path, that has a pointer to
struct dentry and to struct ovl_layer.
Add a small helper to find the fs layer id that correspopnds to a lower
struct ovl_path and use it in ovl_lookup().
[amir: split re-structure from anonymous bdev patch]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enforcing exclusive ownership on upper/work dirs caused a docker
regression: https://github.com/moby/moby/issues/34672.
Euan spotted the regression and pointed to the offending commit.
Vivek has brought the regression to my attention and provided this
reproducer:
Terminal 1:
mount -t overlay -o workdir=work,lowerdir=lower,upperdir=upper none
merged/
Terminal 2:
unshare -m
Terminal 1:
umount merged
mount -t overlay -o workdir=work,lowerdir=lower,upperdir=upper none
merged/
mount: /root/overlay-testing/merged: none already mounted or mount point
busy
To fix the regression, I replaced the error with an alarming warning.
With index feature enabled, mount does fail, but logs a suggestion to
override exclusive dir protection by disabling index.
Note that index=off mount does take the inuse locks, so a concurrent
index=off will issue the warning and a concurrent index=on mount will fail.
Documentation was updated to reflect this change.
Fixes: 2cac0c00a6 ("ovl: get exclusive ownership on upper/work dirs")
Cc: <stable@vger.kernel.org> # v4.13
Reported-by: Euan Kemp <euank@euank.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For rename, we need to ensure that an upper alias exists for hard links
before attempting the operation. Introduce a flag in ovl_entry to track
the state of the upper alias.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Create the index dir on mount. The index dir will contain hardlinks to
upper inodes, named after the hex representation of their origin lower
inodes.
The index dir is going to be used to prevent breaking lower hardlinks
on copy up and to implement overlayfs NFS export.
Because the feature is not fully backward compat, enabling the feature
is opt-in by config/module/mount option.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Bad things can happen if several concurrent overlay mounts try to
use the same upperdir/workdir path.
Try to get the 'inuse' advisory lock on upperdir and workdir.
Fail mount if another overlay mount instance or another user
holds the 'inuse' lock on these directories.
Note that this provides no protection for concurrent overlay
mount that use overlapping (i.e. descendant) upper/work dirs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the new ovl_inode mutex to synchonize concurrent copy up
instead of the super block copy up workqueue.
Moving the synchronization object from the overlay dentry to
the overlay inode is needed for synchonizing concurrent copy up
of lower hardlinks to the same upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We need some more space to store overlay inode data in memory,
so allocate overlay inodes from a slab of struct ovl_inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When moving a merge dir or non-dir with copy up origin into a non-merge
upper dir (a.k.a pure upper dir), we are marking the target parent dir
"impure". ovl_iterate() iterates pure upper dirs directly, because there is
no need to filter out whiteouts and merge dir content with lower dir. But
for the case of an "impure" upper dir, ovl_iterate() will not be able to
iterate the real upper dir directly, because it will need to lookup the
origin inode and use it to fill d_ino.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
xattr are needed by overlayfs for setting opaque dir, redirect dir
and copy up origin.
Check at mount time by trying to set the overlay.opaque xattr on the
workdir and if that fails issue a warning message.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some features can only work when all layers are on the same fs. Test this
condition during mount time, so features can check them later.
Add helper ovl_same_sb() to return the common super block in case all
layers are on the same fs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The overlay sb 'copyup_wq' and overlay inode 'copying' condition
variable are about to replace the upper sb rename_lock, as finer
grained synchronization objects for concurrent copy up.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed for choosing between concurrent copyup
using O_TMPFILE and legacy copyup using workdir+rename.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Current code returns EXDEV when a directory would need to be copied up to
move. We could copy up the directory tree in this case, but there's
another, simpler solution: point to old lower directory from moved upper
directory.
This is achieved with a "trusted.overlay.redirect" xattr storing the path
relative to the root of the overlay. After such attribute has been set,
the directory can be moved without further actions required.
This is a backward incompatible feature, old kernels won't be able to
correctly mount an overlay containing redirected directories.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a directory has the "trusted.overlay.redirect" xattr, it means that the
value of the xattr should be used to find the underlying directory on the
next lower layer.
The redirect may be relative or absolute. Absolute redirects begin with a
slash.
A relative redirect means: instead of the current dentry's name use the
value of the redirect to find the directory in the next lower
layer. Relative redirects must not contain a slash.
An absolute redirect means: look up the directory relative to the root of
the overlay using the value of the redirect in the next lower layer.
Redirects work on lower layers as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We already calculate f_namelen in statfs as the maximum of the name lengths
provided by the filesystems taking part in the overlay.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fs/overlayfs/super.c is the biggest of the overlayfs source files and it
contains various utility functions as well as the rather complicated lookup
code. Split these parts out to separate files.
Before:
1446 fs/overlayfs/super.c
After:
919 fs/overlayfs/super.c
267 fs/overlayfs/namei.c
235 fs/overlayfs/util.c
51 fs/overlayfs/ovl_entry.h
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Sargun Dhillon