This function is called from enable_iommus(), which in turn is used
from amd_iommu_resume().
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The number of IOMMUs supported should be the same as the number
of IO APICS. This limit comes into play when the IOMMUs are
identity mapped, thus the number of possible IOMMUs in the
"static identity" (si) domain should be this same number.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Daniel Rahn <drahn@suse.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Joerg Roedel <joerg.roedel@amd.com>
[ Fixed printk format string, cleaned up the code ]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-ixcmp0hfp0a3b2lfv3uo0p0x@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With SandyBridge, Intel has changed these Socket PCI devices to
have a class type of "System Peripheral" & "Performance
counter", rather than "HostBridge".
So instead of using a "special" case to detect which devices will
not be doing DMA, use the fact that a device that is not associated
with an IOMMU, will not need an identity map.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Mike Habeck <habeck@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Daniel Rahn <drahn@suse.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-018fywmjs3lmzfyzjlktg8dx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The hardware-initializtion part of the AMD IOMMU driver is
split out into a seperate function. This function can now be
called either from amd_iommu_init() itself or any other
place if the hardware needs to be ready earlier. This will
be used to implement interrupt remapping for AMD.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
omap3isp depends on omap's iommu and will fail to probe if
initialized before it (which always happen if they are builtin).
Make omap's iommu subsys_initcall as an interim solution until
the probe deferral mechanism is merged.
Reported-by: James <angweiyang@gmail.com>
Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable <stable@vger.kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Adapt omap-iommu-debug to the latest omap-iommu API changes, which
were introduced by commit fabdbca "iommu/omap: eliminate the public
omap_find_iommu_device() method".
In a nutshell, iommu users are not expected to provide the omap_iommu
handle anymore - instead, iommus are attached using their user's device
handle.
omap-iommu-debug is a hybrid beast though: it invokes both public and
private omap iommu API, so fix it as necessary (otherwise a crash
is imminent).
Note: omap-iommu-debug is a bit disturbing, as it fiddles with internal
omap iommu data and requires exposing API which is otherwise not needed.
It should better be more tightly coupled with omap-iommu, to prevent
further bit rot and avoid exposing redundant API. Naturally that's out
of scope for the -rc cycle, so for now just fix the obvious.
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Error handling in msm_iommu_unmap() is broken. On some error
conditions retval is set to a non-zero value which causes
the function to return 'len' at the end. This hides the
error from the user. Zero should be returned in those error
cases.
Cc: David Brown <davidb@codeaurora.org>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: stable@vger.kernel.org # >= 3.1
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: David Brown <davidb@codeaurora.org>
Tegra 20 IOMMU H/W, GART (Graphics Address Relocation Table). This
patch implements struct iommu_ops for GART for the upper IOMMU API.
This H/W module supports only single virtual address space(domain),
and manages a single level 1-to-1 mapping H/W translation page table.
[With small fixes by Joerg Roedel]
Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
On some systems the IVRS table does not contain all PCI
devices present in the system. In case a device not present
in the IVRS table is translated by the IOMMU no DMA is
possible from that device by default.
This patch fixes this by removing the DTE entry for every
PCI device present in the system and not covered by IVRS.
Cc: stable@vger.kernel.org # >= 3.0
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
memblock: Reimplement memblock allocation using reverse free area iterator
memblock: Kill early_node_map[]
score: Use HAVE_MEMBLOCK_NODE_MAP
s390: Use HAVE_MEMBLOCK_NODE_MAP
mips: Use HAVE_MEMBLOCK_NODE_MAP
ia64: Use HAVE_MEMBLOCK_NODE_MAP
SuperH: Use HAVE_MEMBLOCK_NODE_MAP
sparc: Use HAVE_MEMBLOCK_NODE_MAP
powerpc: Use HAVE_MEMBLOCK_NODE_MAP
memblock: Implement memblock_add_node()
memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users
memblock: Track total size of regions automatically
powerpc: Cleanup memblock usage
memblock: Reimplement memblock_enforce_memory_limit() using __memblock_remove()
memblock: Make memblock functions handle overflowing range @size
memblock: Reimplement __memblock_remove() using memblock_isolate_range()
memblock: Separate out memblock_isolate_range() from memblock_set_node()
memblock: Kill memblock_init()
memblock: Kill sentinel entries at the end of static region arrays
memblock: Add __memblock_dump_all()
...
To protect the command buffer from hanging when a device
does not respond to an IOTLB invalidation, set a timeout of
1s for outstanding IOTLB invalidations.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The IOMMUv2 driver added a few statistic counter which are
interesting in the iommu=pt mode too. So initialize the
statistic counter for that mode too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux:
drm/i915/dp: Dither down to 6bpc if it makes the mode fit
drm/i915: enable semaphores on per-device defaults
drm/i915: don't set unpin_work if vblank_get fails
drm/i915: By default, enable RC6 on IVB and SNB when reasonable
iommu: Export intel_iommu_enabled to signal when iommu is in use
drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
drm/i915: prevent division by zero when asking for chipset power
drm/i915: add PCH info to i915_capabilities
drm/i915: set the right SDVO transcoder for CPT
drm/i915: no-lvds quirk for ASUS AT5NM10T-I
drm/i915: Treat pre-gen4 backlight duty cycle value consistently
drm/i915: Hook up Ivybridge eDP
drm/i915: add multi-threaded forcewake support
In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar
is enabled. The new 'intel_iommu_enabled' variable signals when the
iommu code is in operation.
Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since it is not guaranteed that an iommu driver initializes in its
domain_init() function, it must be initialized with NULL to prevent
calling a function in an arbitrary location when iommu fault occurred.
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This call-back is invoked when the task that is bound to a
pasid is about to exit. The driver can use it to shutdown
all context related to that context in a safe way.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This function can be used to find out which features
necessary for IOMMUv2 usage are available on a given device.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The symbolic register names for PCI and PASID changed in
PCI code. This patch adapts the AMD IOMMU driver to these
changes.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Since pages are not pinned anymore we need notifications
when the VMM changes the page-tables. Use mmu_notifiers for
that.
Also use the task_exit notifier from the profiling subsystem
to shutdown all contexts related to this task.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds the amd_iommu_init_device() and
amd_iommu_free_device() functions which make a device and
the IOMMU ready for IOMMUv2 usage.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add a Kconfig option for the optional driver. Since it is
optional it can be compiled as a module and will only be
loaded when required by another driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The AMD IOMMUv2 driver needs to get the IOMMUv2 domain
associated with a particular device. This patch adds a
function to get this information.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
To send completions for PPR requests this patch adds a
function which can be used by the IOMMUv2 driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds functions necessary to set and clear the
GCR3 values associated with a particular PASID in an IOMMUv2
domain.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The functions added with this patch allow to manage the
IOMMU and the device TLBs for all devices in an IOMMUv2
domain.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This function can be used to switch a domain into
paging-mode 0. In this mode all devices can access physical
system memory directly without any remapping.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If the device starts to use IOMMUv2 features the dma handles
need to stay valid. The only sane way to do this is to use a
identity mapping for the device and not translate it by the
iommu. This is implemented with this patch. Since this lifts
the device-isolation there is also a new kernel parameter
which allows to disable that feature.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In mixed IOMMU setups this flag inidicates whether an IOMMU
supports the v2 features or not. This patch also adds a
global flag together with a function to query that flag from
other code. The flag shows if at least one IOMMUv2 is in the
system.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Read the number of PASIDs supported by each IOMMU in the
system and take the smallest number as the maximum value
supported by the IOMMU driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Convert the contents of 'struct dev_table_entry' to u64 to
allow updating the DTE wit 64bit writes as required by the
spec.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Now all ARCH_POPULATES_NODE_MAP archs select HAVE_MEBLOCK_NODE_MAP -
there's no user of early_node_map[] left. Kill early_node_map[] and
replace ARCH_POPULATES_NODE_MAP with HAVE_MEMBLOCK_NODE_MAP. Also,
relocate for_each_mem_pfn_range() and helper from mm.h to memblock.h
as page_alloc.c would no longer host an alternative implementation.
This change is ultimately one to one mapping and shouldn't cause any
observable difference; however, after the recent changes, there are
some functions which now would fit memblock.c better than page_alloc.c
and dependency on HAVE_MEMBLOCK_NODE_MAP instead of HAVE_MEMBLOCK
doesn't make much sense on some of them. Further cleanups for
functions inside HAVE_MEMBLOCK_NODE_MAP in mm.h would be nice.
-v2: Fix compile bug introduced by mis-spelling
CONFIG_HAVE_MEMBLOCK_NODE_MAP to CONFIG_MEMBLOCK_HAVE_NODE_MAP in
mmzone.h. Reported by Stephen Rothwell.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
An omap_iommu_iova_to_phys failure usually means that iova wasn't mapped.
When that happens, it's helpful to know the value of iova, so add it
to the error message.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Fix:
Section mismatch in reference from the function
ir_dev_scope_init() to the function
.init.text:dmar_dev_scope_init() The function
ir_dev_scope_init() references the function __init dmar_dev_scope_init().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfish
Signed-off-by: Ingo Molnar <mingo@elte.hu>
dmar_parse_rmrr_atsr_dev() calls rmrr_parse_dev() and
atsr_parse_dev() which are both marked as __init.
Section mismatch in reference from the function
dmar_parse_rmrr_atsr_dev() to the function
.init.text:dmar_parse_dev_scope() The function
dmar_parse_rmrr_atsr_dev() references the function __init
dmar_parse_dev_scope().
Section mismatch in reference from the function
dmar_parse_rmrr_atsr_dev() to the function
.init.text:dmar_parse_dev_scope() The function
dmar_parse_rmrr_atsr_dev() references the function __init
dmar_parse_dev_scope().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Link: http://lkml.kernel.org/r/20111026154539.GA10103@swordfish
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Eliminate the public omap_find_iommu_device() method, and don't
expect clients to provide the omap_iommu handle anymore.
Instead, OMAP's iommu driver now utilizes dev_archdata's private iommu
extension to be able to access the required iommu information.
This way OMAP IOMMU users are now able to use the generic IOMMU API without
having to call any omap-specific binding method.
Update omap3isp appropriately.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Conflicts & resolutions:
* arch/x86/xen/setup.c
dc91c728fd "xen: allow extra memory to be in multiple regions"
24aa07882b "memblock, x86: Replace memblock_x86_reserve/free..."
conflicted on xen_add_extra_mem() updates. The resolution is
trivial as the latter just want to replace
memblock_x86_reserve_range() with memblock_reserve().
* drivers/pci/intel-iommu.c
166e9278a3 "x86/ia64: intel-iommu: move to drivers/iommu/"
5dfe8660a3 "bootmem: Replace work_with_active_regions() with..."
conflicted as the former moved the file under drivers/iommu/.
Resolved by applying the chnages from the latter on the moved
file.
* mm/Kconfig
6661672053 "memblock: add NO_BOOTMEM config symbol"
c378ddd53f "memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option"
conflicted trivially. Both added config options. Just
letting both add their own options resolves the conflict.
* mm/memblock.c
d1f0ece6cd "mm/memblock.c: small function definition fixes"
ed7b56a799 "memblock: Remove memblock_memory_can_coalesce()"
confliected. The former updates function removed by the
latter. Resolution is trivial.
Signed-off-by: Tejun Heo <tj@kernel.org>
The option iommu=group_mf indicates the that the iommu driver should
expose all functions of a multi-function PCI device as the same
iommu_device_group. This is useful for disallowing individual functions
being exposed as independent devices to userspace as there are often
hidden dependencies. Virtual functions are not affected by this option.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Just use the amd_iommu_alias_table directly.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
We generally have BDF granularity for devices, so we just need
to make sure devices aren't hidden behind PCIe-to-PCI bridges.
We can then make up a group number that's simply the concatenated
seg|bus|dev|fn so we don't have to track them (not that users
should depend on that).
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
An IOMMU group is a set of devices for which the IOMMU cannot
distinguish transactions. For PCI devices, a group often occurs
when a PCI bridge is involved. Transactions from any device
behind the bridge appear to be sourced from the bridge itself.
We leave it to the IOMMU driver to define the grouping restraints
for their platform.
Using this new interface, the group for a device can be retrieved
using the iommu_device_group() callback. Users will compare the
value returned against the value returned for other devices to
determine whether they are part of the same group. Devices with
no group are not translated by the IOMMU. There should be no
expectations about the group numbers as they may be arbitrarily
assigned by the IOMMU driver and may not be persistent across boots.
We also provide a sysfs interface to the group numbers here so
that userspace can understand IOMMU dependencies between devices
for managing safe, userspace drivers.
[Some code changes by Joerg Roedel <joerg.roedel@amd.com>]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Now that all IOMMU drivers are exporting their supported pgsizes,
we can remove the default pgsize settings in register_iommu().
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Let the IOMMU core know we support arbitrary page sizes (as long as
they're an order of 4KiB).
This way the IOMMU core will retain the existing behavior we're used to;
it will let us map regions that:
- their size is an order of 4KiB
- they are naturally aligned
Note: Intel IOMMU hardware doesn't support arbitrary page sizes,
but the driver does (it splits arbitrary-sized mappings into
the pages supported by the hardware).
To make everything simpler for now, though, this patch effectively tells
the IOMMU core to keep giving this driver the same memory regions it did
before, so nothing is changed as far as it's concerned.
At this point, the page sizes announced remain static within the IOMMU
core. To correctly utilize the pgsize-splitting of the IOMMU core by
this driver, it seems that some core changes should still be done,
because Intel's IOMMU page size capabilities seem to have the potential
to be different between different DMA remapping devices.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Let the IOMMU core know we support arbitrary page sizes (as long as
they're an order of 4KiB).
This way the IOMMU core will retain the existing behavior we're used to;
it will let us map regions that:
- their size is an order of 4KiB
- they are naturally aligned
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Let the IOMMU core know we support 4KiB, 64KiB, 1MiB and 16MiB page sizes.
This way the IOMMU core can split any arbitrary-sized physically
contiguous regions (that it needs to map) as needed.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Let the IOMMU core know we support 4KiB, 64KiB, 1MiB and 16MiB page sizes.
This way the IOMMU core can split any arbitrary-sized physically
contiguous regions (that it needs to map) as needed.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
When mapping a memory region, split it to page sizes as supported
by the iommu hardware. Always prefer bigger pages, when possible,
in order to reduce the TLB pressure.
The logic to do that is now added to the IOMMU core, so neither the iommu
drivers themselves nor users of the IOMMU API have to duplicate it.
This allows a more lenient granularity of mappings; traditionally the
IOMMU API took 'order' (of a page) as a mapping size, and directly let
the low level iommu drivers handle the mapping, but now that the IOMMU
core can split arbitrary memory regions into pages, we can remove this
limitation, so users don't have to split those regions by themselves.
Currently the supported page sizes are advertised once and they then
remain static. That works well for OMAP and MSM but it would probably
not fly well with intel's hardware, where the page size capabilities
seem to have the potential to be different between several DMA
remapping devices.
register_iommu() currently sets a default pgsize behavior, so we can convert
the IOMMU drivers in subsequent patches. After all the drivers
are converted, the temporary default settings will be removed.
Mainline users of the IOMMU API (kvm and omap-iovmm) are adopted
to deal with bytes instead of page order.
Many thanks to Joerg Roedel <Joerg.Roedel@amd.com> for significant review!
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: KyongHo Cho <pullip.cho@samsung.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Express sizes in bytes rather than in page order, to eliminate the
size->order->size conversions we have whenever the IOMMU API is calling
the low level drivers' map/unmap methods.
Adopt all existing drivers.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: KyongHo Cho <pullip.cho@samsung.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Fix compile failure in drivers/iommu/omap-iommu-debug.c
because of missing module.h include.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits)
iommu/core: Remove global iommu_ops and register_iommu
iommu/msm: Use bus_set_iommu instead of register_iommu
iommu/omap: Use bus_set_iommu instead of register_iommu
iommu/vt-d: Use bus_set_iommu instead of register_iommu
iommu/amd: Use bus_set_iommu instead of register_iommu
iommu/core: Use bus->iommu_ops in the iommu-api
iommu/core: Convert iommu_found to iommu_present
iommu/core: Add bus_type parameter to iommu_domain_alloc
Driver core: Add iommu_ops to bus_type
iommu/core: Define iommu_ops and register_iommu only with CONFIG_IOMMU_API
iommu/amd: Fix wrong shift direction
iommu/omap: always provide iommu debug code
iommu/core: let drivers know if an iommu fault handler isn't installed
iommu/core: export iommu_set_fault_handler()
iommu/omap: Fix build error with !IOMMU_SUPPORT
iommu/omap: Migrate to the generic fault report mechanism
iommu/core: Add fault reporting mechanism
iommu/core: Use PAGE_SIZE instead of hard-coded value
iommu/core: use the existing IS_ALIGNED macro
iommu/msm: ->unmap() should return order of unmapped page
...
Fixup trivial conflicts in drivers/iommu/Makefile: "move omap iommu to
dedicated iommu folder" vs "Rename the DMAR and INTR_REMAP config
options" just happened to touch lines next to each other.
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock()
lockdep: Comment all warnings
lib: atomic64: Change the type of local lock to raw_spinlock_t
locking, lib/atomic64: Annotate atomic64_lock::lock as raw
locking, x86, iommu: Annotate qi->q_lock as raw
locking, x86, iommu: Annotate irq_2_ir_lock as raw
locking, x86, iommu: Annotate iommu->register_lock as raw
locking, dma, ipu: Annotate bank_lock as raw
locking, ARM: Annotate low level hw locks as raw
locking, drivers/dca: Annotate dca_lock as raw
locking, powerpc: Annotate uic->lock as raw
locking, x86: mce: Annotate cmci_discover_lock as raw
locking, ACPI: Annotate c3_lock as raw
locking, oprofile: Annotate oprofilefs lock as raw
locking, video: Annotate vga console lock as raw
locking, latencytop: Annotate latency_lock as raw
locking, timer_stats: Annotate table_lock as raw
locking, rwsem: Annotate inner lock as raw
locking, semaphores: Annotate inner lock as raw
locking, sched: Annotate thread_group_cputimer as raw
...
Fix up conflicts in kernel/posix-cpu-timers.c manually: making
cputimer->cputime a raw lock conflicted with the ABBA fix in commit
bcd5cff721 ("cputimer: Cure lock inversion").
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, ioapic: Consolidate the explicit EOI code
x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()
x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC
iommu: Rename the DMAR and INTR_REMAP config options
x86, ioapic: Define irq_remap_modify_chip_defaults()
x86, msi, intr-remap: Use the ioapic set affinity routine
iommu: Cleanup ifdefs in detect_intel_iommu()
iommu: No need to set dmar_disabled in check_zero_address()
iommu: Move IOMMU specific code to intel-iommu.c
intr_remap: Call dmar_dev_scope_init() explicitly
x86, x2apic: Enable the bios request for x2apic optout
With all IOMMU drivers being converted to bus_set_iommu the
global iommu_ops are no longer required. The same is true
for the deprecated register_iommu function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Convert the MSM IOMMU driver for ARM to use the new
interface for publishing the iommu_ops.
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Convert the OMAP IOMMU driver on ARM to use the new
interface for publishing the iommu_ops.
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Convert the Intel IOMMU driver to use the new interface for
publishing the iommu_ops.
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
With per-bus iommu_ops the iommu_found function needs to
work on a bus_type too. This patch adds a bus_type parameter
to that function and converts all call-places.
The function is also renamed to iommu_present because the
function now checks if an iommu is present for a given bus
and does not check for a global iommu anymore.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This is necessary to store a pointer to the bus-specific
iommu_ops in the iommu-domain structure. It will be used
later to call into bus-specific iommu-ops.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This is the starting point to make the iommu_ops used for
the iommu-api a per-bus-type structure. It is required to
easily implement bus-specific setup in the iommu-layer.
The first user will be the iommu-group attribute in sysfs.
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If target_level == 0, current code breaks out of the while-loop if
SUPERPAGE bit is set. We should also break out if PTE is not present.
If we don't do this, KVM calls to iommu_iova_to_phys() will cause
pfn_to_dma_pte() to create mapping for 4KiB pages.
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
set dmar->iommu_superpage field to the smallest common denominator
of super page sizes supported by all active VT-d engines. Initialize
this field in intel_iommu_domain_init() API so intel_iommu_map() API
will be able to use iommu_superpage field to determine the appropriate
super page size to use.
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
iommu_unmap() API expects IOMMU drivers to return the actual page order
of the address being unmapped. Previous code was just returning page
order passed in from the caller. This patch fixes this problem.
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
We really don't want this to work in the general case; device drivers
*shouldn't* care whether they are behind an IOMMU or not. But the
integrated graphics is a special case, because the IOMMU and the GTT are
all kind of smashed into one and generally horrifically buggy, so it's
reasonable for the graphics driver to want to know when the IOMMU is
active for the graphics hardware.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
To work around a hardware issue, we have to submit IOTLB flushes while
the graphics engine is idle. The graphics driver will (we hope) go to
great lengths to ensure that it gets that right on the affected
chipset(s)... so let's not screw it over by deferring the unmap and
doing it later. That wouldn't be very helpful.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The shift direction was wrong because the function takes a
page number and i is the address is the loop.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
When unbinding a device so that I could pass it through to a KVM VM, I
got the lockdep report below. It looks like a legitimate lock
ordering problem:
- domain_context_mapping_one() takes iommu->lock and calls
iommu_support_dev_iotlb(), which takes device_domain_lock (inside
iommu->lock).
- domain_remove_one_dev_info() starts by taking device_domain_lock
then takes iommu->lock inside it (near the end of the function).
So this is the classic AB-BA deadlock. It looks like a safe fix is to
simply release device_domain_lock a bit earlier, since as far as I can
tell, it doesn't protect any of the stuff accessed at the end of
domain_remove_one_dev_info() anyway.
BTW, the use of device_domain_lock looks a bit unsafe to me... it's
at least not obvious to me why we aren't vulnerable to the race below:
iommu_support_dev_iotlb()
domain_remove_dev_info()
lock device_domain_lock
find info
unlock device_domain_lock
lock device_domain_lock
find same info
unlock device_domain_lock
free_devinfo_mem(info)
do stuff with info after it's free
However I don't understand the locking here well enough to know if
this is a real problem, let alone what the best fix is.
Anyway here's the full lockdep output that prompted all of this:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.39.1+ #1
-------------------------------------------------------
bash/13954 is trying to acquire lock:
(&(&iommu->lock)->rlock){......}, at: [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230
but task is already holding lock:
(device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (device_domain_lock){-.-...}:
[<ffffffff8109ca9d>] lock_acquire+0x9d/0x130
[<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0
[<ffffffff812f8350>] domain_context_mapping_one+0x600/0x750
[<ffffffff812f84df>] domain_context_mapping+0x3f/0x120
[<ffffffff812f9175>] iommu_prepare_identity_map+0x1c5/0x1e0
[<ffffffff81ccf1ca>] intel_iommu_init+0x88e/0xb5e
[<ffffffff81cab204>] pci_iommu_init+0x16/0x41
[<ffffffff81002165>] do_one_initcall+0x45/0x190
[<ffffffff81ca3d3f>] kernel_init+0xe3/0x168
[<ffffffff8157ac24>] kernel_thread_helper+0x4/0x10
-> #0 (&(&iommu->lock)->rlock){......}:
[<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10
[<ffffffff8109ca9d>] lock_acquire+0x9d/0x130
[<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0
[<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230
[<ffffffff812f8b42>] device_notifier+0x72/0x90
[<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0
[<ffffffff81373ccf>] device_release_driver+0x2f/0x50
[<ffffffff81372ee3>] driver_unbind+0xa3/0xc0
[<ffffffff813724ac>] drv_attr_store+0x2c/0x30
[<ffffffff811e4506>] sysfs_write_file+0xe6/0x170
[<ffffffff8117569e>] vfs_write+0xce/0x190
[<ffffffff811759e4>] sys_write+0x54/0xa0
[<ffffffff81579a82>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
6 locks held by bash/13954:
#0: (&buffer->mutex){+.+.+.}, at: [<ffffffff811e4464>] sysfs_write_file+0x44/0x170
#1: (s_active#3){++++.+}, at: [<ffffffff811e44ed>] sysfs_write_file+0xcd/0x170
#2: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81372edb>] driver_unbind+0x9b/0xc0
#3: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81373cc7>] device_release_driver+0x27/0x50
#4: (&(&priv->bus_notifier)->rwsem){.+.+.+}, at: [<ffffffff8108974f>] __blocking_notifier_call_chain+0x5f/0xb0
#5: (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230
stack backtrace:
Pid: 13954, comm: bash Not tainted 2.6.39.1+ #1
Call Trace:
[<ffffffff810993a7>] print_circular_bug+0xf7/0x100
[<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10
[<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff8109d57d>] ? trace_hardirqs_on_caller+0x13d/0x180
[<ffffffff8109ca9d>] lock_acquire+0x9d/0x130
[<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230
[<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0
[<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230
[<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230
[<ffffffff812f8b42>] device_notifier+0x72/0x90
[<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0
[<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0
[<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0
[<ffffffff81373ccf>] device_release_driver+0x2f/0x50
[<ffffffff81372ee3>] driver_unbind+0xa3/0xc0
[<ffffffff813724ac>] drv_attr_store+0x2c/0x30
[<ffffffff811e4506>] sysfs_write_file+0xe6/0x170
[<ffffffff8117569e>] vfs_write+0xce/0x190
[<ffffffff811759e4>] sys_write+0x54/0xa0
[<ffffffff81579a82>] system_call_fastpath+0x16/0x1b
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The iommu module on omap contains a few functions that are
only used by the debug module. These are however only there
when the debug code is built as a module. Since it is possible
to build the debug code into the kernel, the functions should
also be provided for the built-in case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Make report_iommu_fault() return -ENOSYS whenever an iommu fault
handler isn't installed, so IOMMU drivers can then do their own
platform-specific default behavior if they wanted.
Fault handlers can still return -ENOSYS in case they want to elicit the
default behavior of the IOMMU drivers.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
commit 4f3f8d9 "iommu/core: Add fault reporting mechanism" added
the public iommu_set_fault_handler() symbol but forgot to export it.
Fix that.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Before the restructruing of the x86 IOMMU code,
intel_iommu_init() was getting called directly from
pci_iommu_init() and hence needed to explicitly set
dmar_disabled to 1 for the failure conditions of
check_zero_address().
Recent changes don't call intel_iommu_init() if the intel iommu
detection fails as a result of failure in check_zero_address().
So no need for this ifdef and the code inside it.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.334878686@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Both DMA-remapping aswell as Interrupt-remapping depend on the
dmar dev scope to be initialized. When both DMA and
IRQ-remapping are enabled, we depend on DMA-remapping init code
to call dmar_dev_scope_init(). This resulted in not doing this
init when DMA-remapping was turned off but interrupt-remapping
turned on in the kernel config.
This caused interrupt routing to break with CONFIG_INTR_REMAP=y
and CONFIG_DMAR=n.
This issue was introduced by this commit:
| commit 9d5ce73a64
| Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
| Date: Tue Nov 10 19:46:16 2009 +0900
|
| x86: intel-iommu: Convert detect_intel_iommu to use iommu_init hook
Fix this by calling dmar_dev_scope_init() explicitly from the
interrupt remapping code too.
Reported-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.229207526@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On the platforms which are x2apic and interrupt-remapping
capable, Linux kernel is enabling x2apic even if the BIOS
doesn't. This is to take advantage of the features that x2apic
brings in.
Some of the OEM platforms are running into issues because of
this, as their bios is not x2apic aware. For example, this was
resulting in interrupt migration issues on one of the platforms.
Also if the BIOS SMI handling uses APIC interface to send SMI's,
then the BIOS need to be aware of x2apic mode that OS has
enabled.
On some of these platforms, BIOS doesn't have a HW mechanism to
turnoff the x2apic feature to prevent OS from enabling it.
To resolve this mess, recent changes to the VT-d2 specification:
http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf
includes a mechanism that provides BIOS a way to request system
software to opt out of enabling x2apic mode.
Look at the x2apic optout flag in the DMAR tables before
enabling the x2apic mode in the platform. Also print a warning
that we have disabled x2apic based on the BIOS request.
Kernel boot parameter "intremap=no_x2apic_optout" can be used to
override the BIOS x2apic optout request.
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.171766616@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Without this patch it is possible to select the VIDEO_OMAP3
driver which then selects OMAP_IOVMM. But the omap iommu
driver is not compiled without IOMMU_SUPPORT enabled. Fix
that by forcing OMAP_IOMMU and OMAP_IOVMM are enabled before
VIDEO_OMAP3 can be selected.
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Start using the generic fault report mechanism, as provided by
the IOMMU core, and remove its now-redundant omap_iommu_set_isr API.
Currently we're only interested in letting upper layers know about the
fault, so in case the faulting device is a remote processor, they could
restart it.
Dynamic PTE/TLB loading is not supported.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add iommu fault report mechanism to the IOMMU API, so implementations
could report about mmu faults (translation errors, hardware errors,
etc..).
Fault reports can be used in several ways:
- mere logging
- reset the device that accessed the faulting address (may be necessary
in case the device is a remote processor for example)
- implement dynamic PTE/TLB loading
A dedicated iommu_set_fault_handler() API has been added to allow
users, who are interested to receive such reports, to provide
their handler.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Mark this lowlevel IRQ handler as non-threaded. This prevents a boot
crash when "threadirqs" is on the kernel commandline. Also the
interrupt handler is handling hardware critical events which should
not be delayed into a thread.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The qi->q_lock lock can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.
In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The irq_2_ir_lock can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.
In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The iommu->register_lock can be taken in atomic context and therefore
must not be preempted on -rt - annotate it.
In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace the hard-coded 4kb by PAGE_SIZE to make iommu-api
implementations possible on architectures where
PAGE_SIZE != 4kb.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Replace iommu's alignment checks with the existing IS_ALIGNED macro,
to drop a few lines of code and utilize IS_ALIGNED's type safety.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Users of the IOMMU API (kvm specifically) assume that iommu_unmap()
returns the order of the unmapped page (on success).
Fix msm_iommu_unmap() accordingly.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Users of the IOMMU API (kvm specifically) assume that iommu_unmap()
returns the order of the unmapped page.
Fix omap_iommu_unmap() to do so and adopt omap-iovmm accordingly.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
omap_iovmm requires page-aligned buffers, and that sometimes causes
omap3isp failures (i.e. whenever the buffer passed from userspace is not
page-aligned).
Remove this limitation by rounding the address of the first page entry
down, and adding the offset back to the device address.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
[ohad@wizery.com: rebased, but tested only with aligned buffers]
[ohad@wizery.com: slightly edited the commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The domain_flush_devices() function takes the domain->lock.
But this function is only called from update_domain() which
itself is already called unter the domain->lock. This causes
a deadlock situation when the dma-address-space of a domain
grows larger than 1GB.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The value is only set to true but never set back to false,
which causes to many completion-wait commands to be sent to
hardware. Fix it with this patch.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Make CONFIG_OMAP_IOMMU depend on CONFIG_ARCH_OMAP so other
allmodconfig builds won't fail.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The omap_iommu_set_isr() was still using the mutex functions
but the iommu_lock was converted to a spin_lock. Fix that
up.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Prepend 'omap_' to OMAP's 'struct iommu' and exposed API, to prevent
namespace pollution and generally to improve readability of the code
that still uses the driver directly.
Update the users as needed as well.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Remove unused public APIs from OMAP's iommu driver.
IOMMU functionality should be exposed only via the generic IOMMU API;
this way drivers stay generic, and different IOMMU drivers
don't need to duplicate similar functionalities.
The rest of the API still exposed by OMAP's iommu will be evaluated
and eventually either added to the generic IOMMU API (if relevant),
or completely removed.
The intention is that OMAP's iommu driver will eventually not expose
any public API.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Remove unused functionality from OMAP's iovmm module.
The intention is to eventually completely replace iovmm with the
generic DMA-API, so new code that'd need this iovmm functionality
will have to extend the DMA-API instead.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Use PREFETCH_IOTLB to control the content of the called function,
instead of inlining it in the code.
This improves readability of the code, and also prevents an "unused
function" warning to show up when PREFETCH_IOTLB isn't set.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Stop exporting functions that are used only within the iommu
driver itself.
Eventually OMAP's iommu driver should only expose API via the generic
IOMMU framework.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Move OMAP's iommu drivers to the dedicated iommu drivers folder.
While OMAP's iovmm (virtual memory manager) driver does not strictly
belong to the iommu drivers folder, move it there as well, because
it's by no means OMAP-specific (in concept. technically it is still
coupled with OMAP's iommu).
Eventually, iovmm will be completely replaced with the generic,
iommu-based, dma-mapping API.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Reserve the MSI address range in the address allocator so
that MSI addresses are not handed out as dma handles.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
A few parts of the driver were missing in drivers/iommu.
Move them there to have the complete driver in that
directory.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This should ease finding similarities with different platforms,
with the intention of solving problems once in a generic framework
which everyone can use.
Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge()
has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled
in this patch, too.
As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it.
Compile-tested on x86_64.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This should ease finding similarities with different platforms,
with the intention of solving problems once in a generic framework
which everyone can use.
Compile-tested on x86_64.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This should ease finding similarities with different platforms,
with the intention of solving problems once in a generic framework
which everyone can use.
Compile-tested for MSM8X60.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Create a dedicated folder for iommu drivers, and move the base
iommu implementation over there.
Grouping the various iommu drivers in a single location will help
finding similar problems shared by different platforms, so they
could be solved once, in the iommu framework, instead of solved
differently (or duplicated) in each driver.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Jan Beulich