The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split time64.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200320145351.32292-13-vincenzo.frascino@arm.com
Add fields to the superblock to track the min and max
timestamps supported by filesystems.
Initially, when a superblock is allocated, initialize
it to the max and min values the fields can hold.
Individual filesystems override these to match their
actual limits.
Pseudo filesystems are assumed to always support the
min and max allowable values for the fields.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Several people reported testing failures after setting CLOCK_REALTIME close
to the limits of the kernel internal representation in nanoseconds,
i.e. year 2262.
The failures are exposed in subsequent operations, i.e. when arming timers
or when the advancing CLOCK_MONOTONIC makes the calculation of
CLOCK_REALTIME overflow into negative space.
Now people start to paper over the underlying problem by clamping
calculations to the valid range, but that's just wrong because such
workarounds will prevent detection of real issues as well.
It is reasonable to force an upper bound for the various methods of setting
CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum
uptime of 30 years which is plenty enough even for esoteric embedded
systems. That results in an upper bound of year 2232 for setting the time.
Once that limit is reached in reality this limit is only a small part of
the problem space. But until then this stops people from trying to paper
over the problem at the wrong places.
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reported-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.de
We now use 64-bit time_t on all architectures, so the __kernel_timex,
__kernel_timeval and __kernel_timespec redirects can be removed
after having served their purpose.
This makes it all much less confusing, as the __kernel_* types
now always refer to the same layout based on 64-bit time_t across
all 32-bit and 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct itimerspec is not y2038-safe.
Introduce a new struct __kernel_itimerspec based on the kernel internal
y2038-safe struct itimerspec64.
The definition of struct __kernel_itimerspec includes two struct
__kernel_timespec.
Since struct __kernel_timespec has the same representation in native and
compat modes, so does struct __kernel_itimerspec. This helps have a common
entry point for syscalls using struct __kernel_itimerspec.
New y2038-safe syscalls will use this new type. Since most of the new
syscalls are just an update to the native syscalls with the type update,
place the new definition under CONFIG_64BIT_TIME. This helps architectures
that do not support the above config to keep using the old definition of
struct itimerspec.
Also change the get/put_itimerspec64 to use struct__kernel_itimerspec.
This will help 32 bit architectures to use the new syscalls when
architectures select CONFIG_64BIT_TIME.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: viro@zeniv.linux.org.uk
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: y2038@lists.linaro.org
Link: https://lkml.kernel.org/r/20180617051144.29756-2-deepa.kernel@gmail.com
At this point, we have converted most of the kernel to use timespec64
consistently in place of timespec, so it seems it's time to make
timespec64 the native structure and define timespec in terms of that
one on 64-bit architectures.
Starting with gcc-5, the compiler can completely optimize away the
timespec_to_timespec64 and timespec64_to_timespec functions on 64-bit
architectures. With older compilers, we introduce a couple of extra
copies of local variables, but those are easily avoided by using
the timespec64 based interfaces consistently, as we do in most of the
important code paths already.
The main upside of removing the hack is that printing the tv_sec
field of a timespec64 structure can now use the %lld format
string on all architectures without a cast to time64_t. Without
this patch, the field is a 'long' type and would have to be printed
using %ld on 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-2-arnd@arndb.de
The new struct __kernel_timespec is similar to current
internal kernel struct timespec64 on 64 bit architecture.
The compat structure however is similar to below on little
endian systems (padding and tv_nsec are switched for big
endian systems):
typedef s32 compat_long_t;
typedef s64 compat_kernel_time64_t;
struct compat_kernel_timespec {
compat_kernel_time64_t tv_sec;
compat_long_t tv_nsec;
compat_long_t padding;
};
This allows for both the native and compat representations to
be the same and syscalls using this type as part of their ABI
can have a single entry point to both.
Note that the compat define is not included anywhere in the
kernel explicitly to avoid confusion.
These types will be used by the new syscalls that will be
introduced in the consequent patches.
Most of the new syscalls are just an update to the existing
native ones with this new type. Hence, put this new type under
an ifdef so that the architectures can define CONFIG_64BIT_TIME
when they are ready to handle this switch.
Cc: linux-arch@vger.kernel.org
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On 64-bit architectures, the timespec64 based helpers in linux/time.h
are defined as macros pointing to their timespec based counterparts.
This made sense when they were first introduced, but as we are migrating
away from timespec in general, it's much less intuitive now.
This changes the macros to work in the exact opposite way: we always
provide the timespec64 based helpers and define the old interfaces as
macros for them. Now we can move those macros into linux/time32.h, which
already contains the respective helpers for 32-bit architectures.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The (slow but) ongoing work on conversion from timespec to timespec64
has led some timespec based helper functions to become unused.
No new code should use them, so we can remove the functions entirely.
I'm planning to obsolete additional interfaces next and remove
more of these.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
I ran into this:
================================================================================
UBSAN: Undefined behaviour in kernel/time/time.c:783:2
signed integer overflow:
5273 + 9223372036854771711 cannot be represented in type 'long int'
CPU: 0 PID: 17363 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #88
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org
04/01/2014
0000000000000000 ffff88011457f8f0 ffffffff82344f50 0000000041b58ab3
ffffffff84f98080 ffffffff82344ea4 ffff88011457f918 ffff88011457f8c8
ffff88011457f8e0 7fffffffffffefff ffff88011457f6d8 dffffc0000000000
Call Trace:
[<ffffffff82344f50>] dump_stack+0xac/0xfc
[<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4
[<ffffffff8242f4c8>] ubsan_epilogue+0xd/0x8a
[<ffffffff8242fc04>] handle_overflow+0x202/0x23d
[<ffffffff8242fa02>] ? val_to_string.constprop.6+0x11e/0x11e
[<ffffffff823c7837>] ? debug_smp_processor_id+0x17/0x20
[<ffffffff8131b581>] ? __sigqueue_free.part.13+0x51/0x70
[<ffffffff8146d4e0>] ? rcu_is_watching+0x110/0x110
[<ffffffff8242fc4d>] __ubsan_handle_add_overflow+0xe/0x10
[<ffffffff81476ef8>] timespec64_add_safe+0x298/0x340
[<ffffffff81476c60>] ? timespec_add_safe+0x330/0x330
[<ffffffff812f7990>] ? wait_noreap_copyout+0x1d0/0x1d0
[<ffffffff8184bf18>] poll_select_set_timeout+0xf8/0x170
[<ffffffff8184be20>] ? poll_schedule_timeout+0x2b0/0x2b0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c8a87>] __sys_recvmmsg+0x107/0x790
[<ffffffff833c8980>] ? SyS_recvmsg+0x20/0x20
[<ffffffff81486378>] ? hrtimer_start_range_ns+0x3b8/0x1380
[<ffffffff845f8bfb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60
[<ffffffff8148bcea>] ? do_setitimer+0x39a/0x8e0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff833c91e9>] SyS_recvmmsg+0xd9/0x160
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff823c7853>] ? __this_cpu_preempt_check+0x13/0x20
[<ffffffff8162f680>] ? __context_tracking_exit.part.3+0x30/0x1b0
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
[<ffffffff845f936a>] entry_SYSCALL64_slow_path+0x25/0x25
================================================================================
Line 783 is this:
783 set_normalized_timespec64(&res, lhs.tv_sec + rhs.tv_sec,
784 lhs.tv_nsec + rhs.tv_nsec);
In other words, since lhs.tv_sec and rhs.tv_sec are both time64_t, this
is a signed addition which will cause undefined behaviour on overflow.
Note that this is not currently a huge concern since the kernel should be
built with -fno-strict-overflow by default, but could be a problem in the
future, a problem with older compilers, or other compilers than gcc.
The easiest way to avoid the overflow is to cast one of the arguments to
unsigned (so the addition will be done using unsigned arithmetic).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
All references to timespec_add_safe() now use timespec64_add_safe().
The plan is to replace struct timespec references with struct timespec64
throughout the kernel as timespec is not y2038 safe.
Drop timespec_add_safe() and use timespec64_add_safe() for all
architectures.
Link: http://lkml.kernel.org/r/1461947989-21926-4-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
timespec64_add_safe() has been defined in time64.h for 64 bit systems.
But, 32 bit systems only have an extern function prototype defined.
Provide a definition for the above function.
The function will be necessary as part of y2038 changes. struct
timespec is not y2038 safe. All references to timespec will be replaced
by struct timespec64. The function is meant to be a replacement for
timespec_add_safe().
The implementation is similar to timespec_add_safe().
Link: http://lkml.kernel.org/r/1461947989-21926-2-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The struct itimerspec is not year 2038 safe on 32bit systems due to
the limitation of the struct timespec members. Introduce itimerspec64
which uses struct timespec64 instead and provide conversion functions.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Currently, leapsecond adjustments are done at tick time. As a result,
the leapsecond was applied at the first timer tick *after* the
leapsecond (~1-10ms late depending on HZ), rather then exactly on the
second edge.
This was in part historical from back when we were always tick based,
but correcting this since has been avoided since it adds extra
conditional checks in the gettime fastpath, which has performance
overhead.
However, it was recently pointed out that ABS_TIME CLOCK_REALTIME
timers set for right after the leapsecond could fire a second early,
since some timers may be expired before we trigger the timekeeping
timer, which then applies the leapsecond.
This isn't quite as bad as it sounds, since behaviorally it is similar
to what is possible w/ ntpd made leapsecond adjustments done w/o using
the kernel discipline. Where due to latencies, timers may fire just
prior to the settimeofday call. (Also, one should note that all
applications using CLOCK_REALTIME timers should always be careful,
since they are prone to quirks from settimeofday() disturbances.)
However, the purpose of having the kernel do the leap adjustment is to
avoid such latencies, so I think this is worth fixing.
So in order to properly keep those timers from firing a second early,
this patch modifies the ntp and timekeeping logic so that we keep
enough state so that the update_base_offsets_now accessor, which
provides the hrtimer core the current time, can check and apply the
leapsecond adjustment on the second edge. This prevents the hrtimer
core from expiring timers too early.
This patch does not modify any other time read path, so no additional
overhead is incurred. However, this also means that the leap-second
continues to be applied at tick time for all other read-paths.
Apologies to Richard Cochran, who pushed for similar changes years
ago, which I resisted due to the concerns about the performance
overhead.
While I suspect this isn't extremely critical, folks who care about
strict leap-second correctness will likely want to watch
this. Potentially a -stable candidate eventually.
Originally-suggested-by: Richard Cochran <richardcochran@gmail.com>
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434063297-28657-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On 32-bit systems, timespec64_add_ns() calls __iter_div_u64_rem()
which needs math64.h, and we want to include time64.h in some
cases.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Helper and conversion functions for timespec64.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Define the timespec64 structure and standard helper functions.
[ tglx: Make it 32bit only. 64bit really can map timespec to timespec64 ]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Vincenzo Frascino