- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
* Add support for two new platforms (Zhang Rui).
* Adjust energy unit for Sapphire Rapids (Zhang Rui).
* Do not dump TRL if turbo is not supported (Artem Bityutskiy).
-----BEGIN PGP SIGNATURE-----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=IsN+
-----END PGP SIGNATURE-----
Merge tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the turbostat utility, extend the macros used for
defining device power management callbacks and add a diagnostic
message to the generic power domains code.
Specifics:
- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan
Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
- Add support for two new platforms (Zhang Rui).
- Adjust energy unit for Sapphire Rapids (Zhang Rui).
- Do not dump TRL if turbo is not supported (Artem Bityutskiy)"
* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbostat: version 2022.10.04
tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
tools/power turbostat: Do not dump TRL if turbo is not supported
tools/power turbostat: Add support for MeteorLake platforms
tools/power turbostat: Add support for RPL-S
PM: Improve EXPORT_*_DEV_PM_OPS macros
PM: domains: log failures to register always-on domains
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.
Remove the SPR rapl_dram_energy_units quirk.
Fixes: e7af1ed3fa ("tools/power turbostat: Support additional CPU model numbers")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Do not dump turbo ratio limits if platform does not support turbo, because it
is confusing and the TRL MSRs may even include misleading information. And they
are not supposed to be relied on if turbo is not supported.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add turbostat support for MeteorLake platforms, which behave the same
as RaptorLake platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add turbostat support for RAPTORLAKE_S platform, which behaves the same
as RAPTORLAKE and RAPTORLAKE_P platforms.
RPL-S 601/801 have different CPU ID than the Hybrid ADL-S platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Update version number.
This version includes fixes for:
- fix build failure when using gcc options -Wl,--as-needed
- Fix warning for perf_cap.cpu may be uninitialized
- Fix off by one check for MAX_DIE_PER_PACKAGE
- Fix issue with use of get_physical_die_id instead of
get_physical_die_id
Optimizations:
- Removed unused interfaces and functions
- Better handle package, die, cpu combination by
defining a struct and set at one place instead
at each user level.
New functional change:
- Warn if turbo is disabled and SST turbo-freq feature is requested
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Optimize CPU initialization.
Do cpu related initialization in one function, including setting the cpu
present_cpumask, target_cpumask, and cpu_map and core_count arrays.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
cpu_map already has the cpu package id, die id information.
Thus there is no need to re-evaluating sysfs attributes or stored data
file to get the package id and die id of a given CPU each time.
In order to unitlize this, cpu_map needs to be created unconditionally.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
pkg_id/die_id can be retrieved from struct isst_id, remove the redundant
clos_config->pkg_id/die_id fields.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Enforce the pkg/die value in struct isst_id are either -1 or a valid
value.
This helps avoid inconsistent or redundant checks.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Now, all the get_physical_pkg/die/core_id() users are inside
isst-config.c, so no need to export these APIs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
struct isst_id contains cpu, package and die info, and it can represent
a specific SST power domain.
Introduce is_cpu_in_power_domain() helper to identify if a cpu is in a
specified power_domain.
And cleanup the code to use the new helper.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
struct isst_id already contains package and die id information, thus
there is no need to get the package and die id information, when struct
isst_id is already available.
Remove unneeded get_physical_package_id/get_physical_die_id usage.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
With pkg and die info added into struct isst_id, more functions can
be converted to use struct isst_id as parameter.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Code uses pkg_id and die_id to refer to a specific power domain.
The pkg/die information is already settled at start time. Adding package
id and die id information into struct isst_id so that code does not need
to retrieve them at runtime.
More code cleanups can be done with the package/die info available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
SST control is power-domain based rather than cpu based, on all the
systems including Sapphire Rapids and ealier.
SST core APIs uses cpu id as parameter, and use the underlying pkg_id and
die_id information to find a power domain, this is not straight forward
and introduces obscure logics in the code.
Introduce struct isst_id to represent a SST Power Domain.
All core APIs are converted to use struct isst_id as parameter instead of
using cpu id.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Remove dead code.
Not functional change in this patch
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
In the function isst_ctdp_display_information(), call to the function
get_cpu_count() is using get_physical_die_id() instead of
get_physical_package_id(). This will result in wrong display of
CPU count in that level.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ Srinivas Pandruvada: fixed subject and change log ]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
The ACC (automatic C-state conversion) feature was available on Sky Lake and
Cascade Lake Xeons (SKX and CLX), but it is not available on Ice Lake and
Sapphire Rapids Xeons (ICX and SPR). Therefore, stop decoding it for ICX and
SPR.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Sapphire Rapids Xeon (SPR) supports 2 flavors of PC6 - PC6N (non-retention) and
PC6R (retention). Before this patch we used ICX package C-state limits, which
was wrong, because ICX has only one PC6 flavor. With this patch, we use SKX PC6
limits for SPR, because they are the same.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The 'automatic_cstate_conversion_probe()' function has a too long 'if'
statement, convert it to a 'switch' statement in order to improve code
readability a bit.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Before this patch, SPR platform was considered identical to ICX platform. This
patch separates SPR support from ICX.
This patch is a preparation for adding SPR-specific package C-state limits
support.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Intel Performance Hybrid processors have a 2nd MSR
describing the turbo limits enforced on the Ecores.
Note, TRL and Secondary-TRL are usually R/O information,
but on overclock-capable parts, they can be written.
Signed-off-by: Len Brown <len.brown@intel.com>
When CONFIG_INTEL_UNCORE_FREQ_CONTROL is effective,
(Linux 5.9 and later), print the current (and default)
min and max uncore frequency limits.
When that driver provides the current uncore frequency
(Linux 5.18 and later), print a UncMHz column
reflecting the current uncore frequency.
Note that UncMHz is an instantaneous sample, not an average.
eg.
$ sudo ./turbostat -S --show frequency
...
Uncore Frequency pkg0 die0: 800 - 3900 MHz (800 - 3900 MHz)
...
Avg_MHz Busy% Bzy_MHz TSC_MHz UncMHz
28 0.70 4049 3095 3900
Signed-off-by: Len Brown <len.brown@intel.com>
Currently if a fscanf fails then an early return leaks an open
file pointer. Fix this by fclosing the file before the return.
Detected using static analysis with cppcheck:
tools/power/x86/turbostat/turbostat.c:2039:3: error: Resource leak: fp [resourceLeak]
Fixes: eae97e053f ("tools/power turbostat: Support thermal throttle count print")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Using strncmp for a single character comparison is overly complicated,
just use a simpler single character comparison instead. Also stops
static analyzers (such as cppcheck) from complaining about strncmp on
non-null terminated strings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It would be handy to have cmdline in turbostat output. For example,
according to the turbostat output, there are no C-states requested.
In this case the user is very curious if something like
intel_idle.max_cstate=0 was used, or may be idle=none too. It is
also curious whether things like intel_pstate=nohwp were used.
Print the boot command line accordingly:
turbostat version 21.05.04 - Len Brown <lenb@kernel.org>
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0+ root=UUID=
b42359ed-1e05-42eb-8757-6bf2a1c19070 ro quiet splash vt.handoff=7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Remove an unneeded semicolon.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change > MAX_DIE_PER_PACKAGE to >= MAX_DIE_PER_PACKAGE to prevent
accessing one element beyond the end of the array.
Fixes: 7fd786dfbd ("tools/power/x86/intel-speed-select: OOB daemon mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
Initialize perf_cap struct to avoid warning:
CC hfi-events.o
In function ‘process_hfi_event’,
inlined from ‘handle_event’ at hfi-events.c:220:5:
hfi-events.c:184:9: warning: ‘perf_cap.cpu’ may be used
uninitialized [-Wmaybe-uninitialized]
184 | process_level_change(perf_cap->cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hfi-events.c: In function ‘handle_event’:
hfi-events.c:193:25: note: ‘perf_cap.cpu’ was declared here
193 | struct perf_cap perf_cap;
| ^~~~~~~~
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171208.211319-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For Intel SST turbo-freq feature to be enabled, the turbo mode on the
platform must be enabled also. If turbo mode is disabled, display error
while enabling turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220510023421.3930540-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull turbostat changes for 5.19 from Len Brown:
"Chen Yu (1):
tools/power turbostat: Support thermal throttle count print
Dan Merillat (1):
tools/power turbostat: fix dump for AMD cpus
Len Brown (5):
tools/power turbostat: tweak --show and --hide capability
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: be more useful as non-root
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: version 2022.04.16
Sumeet Pawnikar (2):
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: print power values upto three decimal
Zephaniah E. Loss-Cutler-Hull (2):
tools/power turbostat: Allow -e for all names.
tools/power turbostat: Allow printing header every N iterations"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
Don't exit if used this way:
sudo setcap cap_sys_nice,cap_sys_rawio=+ep ./turbostat
sudo chmod +r /dev/cpu/*/msr
./turbostat
note: cap_sys_admin is now also needed for the perf IPC counter:
sudo setcap cap_sys_admin,cap_sys_nice,cap_sys_rawio=+ep ./turbostat
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Toby Broom <tbroom@outlook.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The turbostat data is collected by end user for power evaluationit. However
it looks like we are missing enough thermal context there. Already a couple of
time we found that power management developer asking something like this:
grep -r . /sys/devices/system/cpu/cpu*/thermal_throttle/*
Print the per core thermal throttle count so as to get suffificent thermal
context.
turbostat -i 5 -s Core,CPU,CoreThr
Core CPU CoreThr
- - 104
0 0 61
0 4
1 1 0
1 5
2 2 104
2 6
3 3 7
3 7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds