cfq_group_slice() calculates slice by taking a fraction of
cfq_target_latency according to the ratio of cfqg->weight against
service_tree->total_weight. This currently works only because all
cfqgs are treated to be at the same level.
To prepare for proper hierarchy support, convert cfq_group_slice() to
base the calculation on cfqg->vfraction. As cfqg->vfraction is always
a fraction of 1 and represents the fraction allocated to the cfqg with
hierarchy considered, the slice can be simply calculated by
multiplying cfqg->vfraction to cfq_target_latency (with fixed point
shift factored in).
As vfraction calculation currently treats all non-root cfqgs as
children of the root cfqg, this patch doesn't introduce noticeable
behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Currently, cfqg charges are scaled directly according to cfqg->weight.
Regardless of the number of active cfqgs or the amount of active
weights, a given weight value always scales charge the same way. This
works fine as long as all cfqgs are treated equally regardless of
their positions in the hierarchy, which is what cfq currently
implements. It can't work in hierarchical settings because the
interpretation of a given weight value depends on where the weight is
located in the hierarchy.
This patch reimplements cfqg charge scaling so that it can be used to
support hierarchy properly. The scheme is fairly simple and
light-weight.
* When a cfqg is added to the service tree, v(disktime)weight is
calculated. It walks up the tree to root calculating the fraction
it has in the hierarchy. At each level, the fraction can be
calculated as
cfqg->weight / parent->level_weight
By compounding these, the global fraction of vdisktime the cfqg has
claim to - vfraction - can be determined.
* When the cfqg needs to be charged, the charge is scaled inversely
proportionally to the vfraction.
The new scaling scheme uses the same CFQ_SERVICE_SHIFT for fixed point
representation as before; however, the smallest scaling factor is now
1 (ie. 1 << CFQ_SERVICE_SHIFT). This is different from before where 1
was for CFQ_WEIGHT_DEFAULT and higher weight would result in smaller
scaling factor.
While this shifts the global scale of vdisktime a bit, it doesn't
change the relative relationships among cfqgs and the scheduling
result isn't different.
cfq_group_notify_queue_add uses fixed CFQ_IDLE_DELAY when appending
new cfqg to the service tree. The specific value of CFQ_IDLE_DELAY
didn't have any relevance to vdisktime before and is unlikely to cause
any visible behavior difference now especially as the scale shift
isn't that large.
As the new scheme now makes proper distinction between cfqg->weight
and ->leaf_weight, reverse the weight aliasing for root cfqgs. For
root, both weights are now mapped to ->leaf_weight instead of the
other way around.
Because we're still using cfqg_flat_parent(), this patch shouldn't
change the scheduling behavior in any noticeable way.
v2: Beefed up comments on vfraction as requested by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
To prepare for blkcg hierarchy support, add cfqg->nr_active and
->children_weight. cfqg->nr_active counts the number of active cfqgs
at the cfqg's level and ->children_weight is sum of weights of those
cfqgs. The level covers itself (cfqg->leaf_weight) and immediate
children.
The two values are updated when a cfqg enters and leaves the group
service tree. Unless the hierarchy is very deep, the added overhead
should be negligible.
Currently, the parent is determined using cfqg_flat_parent() which
makes the root cfqg the parent of all other cfqgs. This is to make
the transition to hierarchy-aware scheduling gradual. Scheduling
logic will be converted to use cfqg->children_weight without actually
changing the behavior. When everything is ready,
blkcg_weight_parent() will be replaced with proper parent function.
This patch doesn't introduce any behavior chagne.
v2: s/cfqg->level_weight/cfqg->children_weight/ as per Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
cfq blkcg is about to grow proper hierarchy handling, where a child
blkg's weight would nest inside the parent's. This makes tasks in a
blkg to compete against both tasks in the sibling blkgs and the tasks
of child blkgs.
We're gonna use the existing weight as the group weight which decides
the blkg's weight against its siblings. This patch introduces a new
weight - leaf_weight - which decides the weight of a blkg against the
child blkgs.
It's named leaf_weight because another way to look at it is that each
internal blkg nodes have a hidden child leaf node which contains all
its tasks and leaf_weight is the weight of the leaf node and handled
the same as the weight of the child blkgs.
This patch only adds leaf_weight fields and exposes it to userland.
The new weight isn't actually used anywhere yet. Note that
cfq-iosched currently offcially supports only single level hierarchy
and root blkgs compete with the first level blkgs - ie. root weight is
basically being used as leaf_weight. For root blkgs, the two weights
are kept in sync for backward compatibility.
v2: cfqd->root_group->leaf_weight initialization was missing from
cfq_init_queue() causing divide by zero when
!CONFIG_CFQ_GROUP_SCHED. Fix it. Reported by Fengguang.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Currently we attach a character "S" or "A" to the cfqq<pid>, to represent
whether queues is sync or async. Add one more character "N" to represent
whether it is sync-noidle queue or sync queue. So now three different
type of queues will look as follows.
cfq1234S --> sync queus
cfq1234SN --> sync noidle queue
cfq1234A --> Async queue
Previously S/A classification was being printed only if group scheduling
was enabled. This patch also makes sure that this classification is
displayed even if group idling is disabled.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use of local varibale "n" seems to be unnecessary. Remove it. This brings
it inline with function __cfq_group_st_add(), which is also doing the
similar operation of adding a group to a rb tree.
No functionality change here.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
choose_service_tree() selects/sets both wl_class and wl_type. Rename it to
choose_wl_class_and_type() to make it very clear.
cfq_choose_wl() only selects and sets wl_type. It is easy to confuse
it with choose_st(). So rename it to cfq_choose_wl_type() to make
it clear what does it do.
Just renaming. No functionality change.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
At quite a few places we use the keyword "service_tree". At some places,
especially local variables, I have abbreviated it to "st".
Also at couple of places moved binary operator "+" from beginning of line
to end of previous line, as per Tejun's feedback.
v2:
Reverted most of the service tree name change based on Jeff Moyer's feedback.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some more renaming. Again making the code uniform w.r.t use of
wl_class/class to represent IO class (RT, BE, IDLE) and using
wl_type/type to represent subclass (SYNC, SYNC-IDLE, ASYNC).
At places this patch shortens the string "workload" to "wl".
Renamed "saved_workload" to "saved_wl_type". Renamed
"saved_serving_class" to "saved_wl_class".
For uniformity with "saved_wl_*" variables, renamed "serving_class"
to "serving_wl_class" and renamed "serving_type" to "serving_wl_type".
Again, just trying to improve upon code uniformity and improve
readability. No functional change.
v2:
- Restored the usage of keyword "service" based on Jeff Moyer's feedback.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently CFQ has three IO classes, RT, BE and IDLE. At many a places we
are calling workloads belonging to these classes as "prio". This gets
very confusing as one starts to associate it with ioprio.
So this patch just does bunch of renaming so that reading code becomes
easier. All reference to RT, BE and IDLE workload are done using keyword
"class" and all references to subclass, SYNC, SYNC-IDLE, ASYNC are made
using keyword "type".
This makes me feel much better while I am reading the code. There is no
functionality change due to this patch.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
request is queued in cfqq->fifo list. Looks it's possible we are moving a
request from one cfqq to another in request merge case. In such case, adjusting
the fifo list order doesn't make sense and is impossible if we don't iterate
the whole fifo list.
My test does hit one case the two cfqq are different, but didn't cause kernel
crash, maybe it's because fifo list isn't used frequently. Anyway, from the
code logic, this is buggy.
I thought we can re-enable the recusive merge logic after this is fixed.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq may be built w/ or w/o blkcg support depending on
CONFIG_CFQ_CGROUP_IOSCHED. If blkcg support is disabled, most of
related code is ifdef'd out but some part is left dangling -
blkcg_policy_cfq is left zero-filled and blkcg_policy_[un]register()
calls are made on it.
Feeding zero filled policy to blkcg_policy_register() is incorrect and
triggers the following WARN_ON() if CONFIG_BLK_CGROUP &&
!CONFIG_CFQ_GROUP_IOSCHED.
------------[ cut here ]------------
WARNING: at block/blk-cgroup.c:867
Modules linked in:
Modules linked in:
CPU: 3 Not tainted 3.4.0-09547-gfb21aff #1
Process swapper/0 (pid: 1, task: 000000003ff80000, ksp: 000000003ff7f8b8)
Krnl PSW : 0704100180000000 00000000003d76ca (blkcg_policy_register+0xca/0xe0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
Krnl GPRS: 0000000000000000 00000000014b85ec 00000000014b85b0 0000000000000000
000000000096fb60 0000000000000000 00000000009a8e78 0000000000000048
000000000099c070 0000000000b6f000 0000000000000000 000000000099c0b8
00000000014b85b0 0000000000667580 000000003ff7fd98 000000003ff7fd70
Krnl Code: 00000000003d76be: a7280001 lhi %r2,1
00000000003d76c2: a7f4ffdf brc 15,3d7680
#00000000003d76c6: a7f40001 brc 15,3d76c8
>00000000003d76ca: a7c8ffea lhi %r12,-22
00000000003d76ce: a7f4ffce brc 15,3d766a
00000000003d76d2: a7f40001 brc 15,3d76d4
00000000003d76d6: a7c80000 lhi %r12,0
00000000003d76da: a7f4ffc2 brc 15,3d765e
Call Trace:
([<0000000000b6f000>] initcall_debug+0x0/0x4)
[<0000000000989e8a>] cfq_init+0x62/0xd4
[<00000000001000ba>] do_one_initcall+0x3a/0x170
[<000000000096fb60>] kernel_init+0x214/0x2bc
[<0000000000623202>] kernel_thread_starter+0x6/0xc
[<00000000006231fc>] kernel_thread_starter+0x0/0xc
no locks held by swapper/0/1.
Last Breaking-Event-Address:
[<00000000003d76c6>] blkcg_policy_register+0xc6/0xe0
---[ end trace b8ef4903fcbf9dd3 ]---
This patch fixes the problem by ensuring all blkcg support code is
inside CONFIG_CFQ_GROUP_IOSCHED.
* blkcg_policy_cfq declaration and blkg_to_cfqg() definition are moved
inside the first CONFIG_CFQ_GROUP_IOSCHED block. __maybe_unused is
dropped from blkcg_policy_cfq decl.
* blkcg_deactivate_poilcy() invocation is moved inside ifdef. This
also makes the activation logic match cfq_init_queue().
* All blkcg_policy_[un]register() invocations are moved inside ifdef.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <20120601112954.GC3535@osiris.boeblingen.de.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq_init() would return zero after kmem cache creation failure. Fix
so that it returns -ENOMEM.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJPnb50AAoJEHm+PkMAQRiGAE0H/A4zFZIUGmF3miKPDYmejmrZ
oVDYxVAu6JHjHWhu8E3VsinvyVscowjV8dr15eSaQzmDmRkSHAnUQ+dB7Di7jLC2
MNopxsWjwyZ8zvvr3rFR76kjbWKk/1GYytnf7GPZLbJQzd51om2V/TY/6qkwiDSX
U8Tt7ihSgHAezefqEmWp2X/1pxDCEt+VFyn9vWpkhgdfM1iuzF39MbxSZAgqDQ/9
JJrBHFXhArqJguhENwL7OdDzkYqkdzlGtS0xgeY7qio2CzSXxZXK4svT6FFGA8Za
xlAaIvzslDniv3vR2ZKd6wzUwFHuynX222hNim3QMaYdXm012M+Nn1ufKYGFxI0=
=4d4w
-----END PGP SIGNATURE-----
Merge tag 'v3.4-rc5' into for-3.5/core
The core branch is behind driver commits that we want to build
on for 3.5, hence I'm pulling in a later -rc.
Linux 3.4-rc5
Conflicts:
Documentation/feature-removal-schedule.txt
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no reason to keep blkcg_policy_ops separate. Collapse it into
blkcg_policy.
This patch doesn't introduce any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blkg_policy_data carries policy specific data as char flex
array instead of being embedded in policy specific data. This was
forced by oddities around blkg allocation which are all gone now.
This patch makes blkg_policy_data embedded in policy specific data -
throtl_grp and cfq_group so that it's more conventional and consistent
with how io_cq is handled.
* blkcg_policy->pdata_size is renamed to ->pd_size.
* Functions which used to take void *pdata now takes struct
blkg_policy_data *pd.
* blkg_to_pdata/pdata_to_blkg() updated to blkg_to_pd/pd_to_blkg().
* Dummy struct blkg_policy_data definition added. Dummy
pdata_to_blkg() definition was unused and inconsistent with the
non-dummy version - correct dummy pd_to_blkg() added.
* throtl and cfq updated accordingly.
* As dummy blkg_to_pd/pd_to_blkg() are provided,
blkg_to_cfqg/cfqg_to_blkg() don't need to be ifdef'd. Moved outside
ifdef block.
This patch doesn't introduce any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During the recent blkcg cleanup, most of blkcg API has changed to such
extent that mass renaming wouldn't cause any noticeable pain. Take
the chance and cleanup the naming.
* Rename blkio_cgroup to blkcg.
* Drop blkio / blkiocg prefixes and consistently use blkcg.
* Rename blkio_group to blkcg_gq, which is consistent with io_cq but
keep the blkg prefix / variable name.
* Rename policy method type and field names to signify they're dealing
with policy data.
* Rename blkio_policy_type to blkcg_policy.
This patch doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkio_group->path[] stores the path of the associated cgroup and is
used only for debug messages. Just format the path from blkg->cgroup
when printing debug messages.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* All_q_list is unused. Drop all_q_{mutex|list}.
* @for_root of blkg_lookup_create() is always %false when called from
outside blk-cgroup.c proper. Factor out __blkg_lookup_create() so
that it doesn't check whether @q is bypassing and use the
underscored version for the @for_root callsite.
* blkg_destroy_all() is used only from blkcg proper and @destroy_root
is always %true. Make it static and drop @destroy_root.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All blkcg policies were assumed to be enabled on all request_queues.
Due to various implementation obstacles, during the recent blkcg core
updates, this was temporarily implemented as shooting down all !root
blkgs on elevator switch and policy [de]registration combined with
half-broken in-place root blkg updates. In addition to being buggy
and racy, this meant losing all blkcg configurations across those
events.
Now that blkcg is cleaned up enough, this patch replaces the temporary
implementation with proper per-queue policy activation. Each blkcg
policy should call the new blkcg_[de]activate_policy() to enable and
disable the policy on a specific queue. blkcg_activate_policy()
allocates and installs policy data for the policy for all existing
blkgs. blkcg_deactivate_policy() does the reverse. If a policy is
not enabled for a given queue, blkg printing / config functions skip
the respective blkg for the queue.
blkcg_activate_policy() also takes care of root blkg creation, and
cfq_init_queue() and blk_throtl_init() are updated accordingly.
This replaces blkcg_bypass_{start|end}() and update_root_blkg_pd()
unnecessary. Dropped.
v2: cfq_init_queue() was returning uninitialized @ret on root_group
alloc failure if !CONFIG_CFQ_GROUP_IOSCHED. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With per-queue policy activation, root blkg creation will be moved to
blkcg core. Add q->root_blkg in preparation. For blk-throtl, this
replaces throtl_data->root_tg; however, cfq needs to keep
cfqd->root_group for !CONFIG_CFQ_GROUP_IOSCHED.
This is to prepare for per-queue policy activation and doesn't cause
any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add @pol to blkg_conf_prep() and let it return with queue lock held
(to be released by blkg_conf_finish()). Note that @pol isn't used
yet.
This is to prepare for per-queue policy activation and doesn't cause
any visible difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove BLKIO_POLICY_* enums and let blkio_policy_register() allocate
@pol->plid dynamically on registration. The maximum number of blkcg
policies which can be registered at the same time is defined by
BLKCG_MAX_POLS constant added to include/linux/blkdev.h.
Note that blkio_policy_register() now may fail. Policy init functions
updated accordingly and unnecessary ifdefs removed from cfq_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The two functions were taking "enum blkio_policy_id plid". Make them
take "const struct blkio_policy_type *pol" instead.
This is to prepare for per-queue policy activation and doesn't cause
any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that all stat handling code lives in policy implementations,
there's no need to encode policy ID in cft->private.
* Export blkcg_prfill_[rw]stat() from blkcg, remove
blkcg_print_[rw]stat(), and implement cfqg_print_[rw]stat() which
use hard-code BLKIO_POLICY_PROP.
* Use cft->private for offset of the target field directly and drop
BLKCG_STAT_{PRIV|POL|OFF}().
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that all conf and stat fields are moved into policy specific
blkio_policy_data->pdata areas, there's no reason to use
blkio_policy_data itself in prfill functions. Pass around @pd->pdata
instead of @pd.
Signed-off-by: Tejun Heo <tj@kernel.org>
blkio_group_conf->weight is owned by cfq and has no reason to be
defined in blkcg core. Replace it with cfq_group->dev_weight and let
conf setting functions directly set it. If dev_weight is zero, the
cfqg doesn't have device specific weight configured.
Also, rename BLKIO_WEIGHT_* constants to CFQ_WEIGHT_* and rename
blkio_cgroup->weight to blkio_cgroup->cfq_weight. We eventually want
per-policy storage in blkio_cgroup but just mark the ownership of the
field for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
blkio_group_stats contains only fields used by cfq and has no reason
to be defined in blkcg core.
* Move blkio_group_stats to cfq-iosched.c and rename it to cfqg_stats.
* blkg_policy_data->stats is replaced with cfq_group->stats.
blkg_prfill_[rw]stat() are updated to use offset against pd->pdata
instead.
* All related macros / functions are renamed so that they have cfqg_
prefix and the unnecessary @pol arguments are dropped.
* All stat functions now take cfq_group * instead of blkio_group *.
* lockdep assertion on queue lock dropped. Elevator runs under queue
lock by default. There isn't much to be gained by adding lockdep
assertions at stat function level.
* cfqg_stats_reset() implemented for blkio_reset_group_stats_fn method
so that cfqg->stats can be reset.
Signed-off-by: Tejun Heo <tj@kernel.org>
blkio_group_stats_cpu is used to count dispatch stats using per-cpu
counters. This is used by both blk-throtl and cfq-iosched but the
sharing is rather silly.
* cfq-iosched doesn't need per-cpu dispatch stats. cfq always updates
those stats while holding queue_lock.
* blk-throtl needs per-cpu dispatch stats but only service_bytes and
serviced. It doesn't make use of sectors.
This patch makes cfq add and use global stats for service_bytes,
serviced and sectors, removes per-cpu sectors counter and moves
per-cpu stat printing code to blk-throttle.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
As with conf/stats file handling code, there's no reason for stat
update code to live in blkcg core with policies calling into update
them. The current organization is both inflexible and complex.
This patch moves stat update code to specific policies. All
blkiocg_update_*_stats() functions which deal with BLKIO_POLICY_PROP
stats are collapsed into their cfq_blkiocg_update_*_stats()
counterparts. blkiocg_update_dispatch_stats() is used by both
policies and duplicated as throtl_update_dispatch_stats() and
cfq_blkiocg_update_dispatch_stats(). This will be cleaned up later.
Signed-off-by: Tejun Heo <tj@kernel.org>
block/cfq.h contains some functions which interact with blkcg;
however, this is only part of it and cfq-iosched.c already has quite
some #ifdef CONFIG_CFQ_GROUP_IOSCHED. With conf/stat handling being
moved to specific policies, having these relay functions isolated in
cfq.h doesn't make much sense. Collapse cfq.h into cfq-iosched.c for
now. Let's split blkcg support properly later if necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
blkcg conf/stat handling is convoluted in that details which belong to
specific policy implementations are all out in blkcg core and then
policies hook into core layer to access and manipulate confs and
stats. This sadly achieves both inflexibility (confs/stats can't be
modified without messing with blkcg core) and complexity (all the
call-ins and call-backs).
The previous patches restructured conf and stat handling code such
that they can be separated out. This patch relocates the file
handling part. All conf/stat file handling code which belongs to
BLKIO_POLICY_PROP is moved to cfq-iosched.c and all
BKLIO_POLICY_THROTL code to blk-throtl.c.
The move is verbatim except for blkio_update_group_{weight|bps|iops}()
callbacks which relays conf changes to policies. The configuration
settings are handled in policies themselves so the relaying isn't
necessary. Conf setting functions are modified to directly call
per-policy update functions and the relaying mechanism is dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
In cfq, when we calculate a time slice for a process(or a cfqq to
be precise), we have to consider the cfq_target_latency so that all the
sync request have an estimated latency(300ms) and it is controlled by
cfq_target_latency. But in some hadoop test, we have found that if
there are many processes doing sequential read(24 for example), the
throughput is bad because every process can only work for about 25ms
and the cfqq is switched. That leads to a higher disk seek. We can
achive the good throughput by setting low_latency=0, but then some
read's latency is too much for the application.
So this patch makes cfq_target_latency tunable through sysfs so that
we can tune it and find some magic number which is not bad for both
the throughput and the read latency.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq caches the associated cfqq's for a given cic. The cache needs to
be flushed if the cic's ioprio or blkcg has changed. It is currently
done by requiring the changing action to set the respective
ICQ_*_CHANGED bit in the icq and testing it from cfq_set_request(),
which involves iterating through all the affected icqs.
All cfq wants to know is whether ioprio and/or blkcg have changed
since the last flush and can be easily achieved by just remembering
the current ioprio and blkcg ID in cic.
This patch adds cic->{ioprio|blkcg_id}, updates all ioprio users to
use the remembered value instead, and updates cfq_set_request() path
such that, instead of using icq_get_changed(), the current values are
compared against the remembered ones and trigger appropriate flush
action if not. Condition tests are moved inside both _changed
functions which are now named check_ioprio_changed() and
check_blkcg_changed().
ioprio.h::task_ioprio*() can't be used anymore and replaced with
open-coded IOPRIO_CLASS_NONE case in cfq_async_queue_prio().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that io_cq is managed by block core and guaranteed to exist for
any in-flight request, it is easier and carries more information to
pass around cfq_io_cq than io_context.
This patch updates cfq_init_prio_data(), cfq_find_alloc_queue() and
cfq_get_queue() to take @cic instead of @ioc. This change removes a
duplicate cfq_cic_lookup() from cfq_find_alloc_queue().
This change enables the use of cic-cached ioprio in the next patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement bio_blkio_cgroup() which returns the blkcg associated with
the bio if exists or %current's blkcg, and use it in blk-throttle and
cfq-iosched propio. This makes both cgroup policies honor task
association for the bio instead of always assuming %current.
As nobody is using bio_set_task() yet, this doesn't introduce any
behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IO scheduling and cgroup are tied to the issuing task via io_context
and cgroup of %current. Unfortunately, there are cases where IOs need
to be routed via a different task which makes scheduling and cgroup
limit enforcement applied completely incorrectly.
For example, all bios delayed by blk-throttle end up being issued by a
delayed work item and get assigned the io_context of the worker task
which happens to serve the work item and dumped to the default block
cgroup. This is double confusing as bios which aren't delayed end up
in the correct cgroup and makes using blk-throttle and cfq propio
together impossible.
Any code which punts IO issuing to another task is affected which is
getting more and more common (e.g. btrfs). As both io_context and
cgroup are firmly tied to task including userland visible APIs to
manipulate them, it makes a lot of sense to match up tasks to bios.
This patch implements bio_associate_current() which associates the
specified bio with %current. The bio will record the associated ioc
and blkcg at that point and block layer will use the recorded ones
regardless of which task actually ends up issuing the bio. bio
release puts the associated ioc and blkcg.
It grabs and remembers ioc and blkcg instead of the task itself
because task may already be dead by the time the bio is issued making
ioc and blkcg inaccessible and those are all block layer cares about.
elevator_set_req_fn() is updated such that the bio elvdata is being
allocated for is available to the elevator.
This doesn't update block cgroup policies yet. Further patches will
implement the support.
-v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in
rq_ioc() to fix build breakage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently ioc->nr_tasks is used to decide two things - whether an ioc
is done issuing IOs and whether it's shared by multiple tasks. This
patch separate out the first into ioc->active_ref, which is acquired
and released using {get|put}_io_context_active() respectively.
This will be used to associate bio's with a given task. This patch
doesn't introduce any visible behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that blkg additions / removals are always done under both q and
blkcg locks, the only places RCU locking is necessary are
blkg_lookup[_create]() for lookup w/o blkcg lock. This patch drops
unncessary RCU locking replacing it with plain blkcg locking as
necessary.
* blkiocg_pre_destroy() already perform proper locking and don't need
RCU. Dropped.
* blkio_read_blkg_stats() now uses blkcg->lock instead of RCU read
lock. This isn't a hot path.
* Now unnecessary synchronize_rcu() from queue exit paths removed.
This makes q->nr_blkgs unnecessary. Dropped.
* RCU annotation on blkg->q removed.
-v2: Vivek pointed out that blkg_lookup_create() still needs to be
called under rcu_read_lock(). Updated.
-v3: After the update, stats_lock locking in blkio_read_blkg_stats()
shouldn't be using _irq variant as it otherwise ends up enabling
irq while blkcg->lock is locked. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blkg is per cgroup-queue-policy combination. This is
unnatural and leads to various convolutions in partially used
duplicate fields in blkg, config / stat access, and general management
of blkgs.
This patch make blkg's per cgroup-queue and let them serve all
policies. blkgs are now created and destroyed by blkcg core proper.
This will allow further consolidation of common management logic into
blkcg core and API with better defined semantics and layering.
As a transitional step to untangle blkg management, elvswitch and
policy [de]registration, all blkgs except the root blkg are being shot
down during elvswitch and bypass. This patch adds blkg_root_update()
to update root blkg in place on policy change. This is hacky and racy
but should be good enough as interim step until we get locking
simplified and switch over to proper in-place update for all blkgs.
-v2: Root blkgs need to be updated on elvswitch too and blkg_alloc()
comment wasn't updated according to the function change. Fixed.
Both pointed out by Vivek.
-v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for
all policies. This freed root pd during elvswitch before the
last queue finished exiting and led to oops. Directly invoke
update_root_blkg_pd() only on BLKIO_POLICY_PROP from
cfq_exit_queue(). This also is closer to what will be done with
proper in-place blkg update. Reported by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the previous patch to move blkg list heads and counters to
request_queue and blkg, logic to manage them in both policies are
almost identical and can be moved to blkcg core.
This patch moves blkg link logic into blkg_lookup_create(), implements
common blkg unlink code in blkg_destroy(), and updates
blkg_destory_all() so that it's policy specific and can skip root
group. The updated blkg_destroy_all() is now used to both clear queue
for bypassing and elv switching, and release all blkgs on q exit.
This patch introduces a race window where policy [de]registration may
race against queue blkg clearing. This can only be a problem on cfq
unload and shouldn't be a real problem in practice (and we have many
other places where this race already exists). Future patches will
remove these unlikely races.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, specific policy implementations are responsible for
maintaining list and number of blkgs. This duplicates code
unnecessarily, and hinders factoring common code and providing blkcg
API with better defined semantics.
After this patch, request_queue hosts list heads and counters and blkg
has list nodes for both policies. This patch only relocates the
necessary fields and the next patch will actually move management code
into blkcg core.
Note that request_queue->blkg_list[] and ->nr_blkgs[] are hardcoded to
have 2 elements. This is to avoid include dependency and will be
removed by the next patch.
This patch doesn't introduce any behavior change.
-v2: Now unnecessary conditional on CONFIG_BLK_CGROUP_MODULE removed
as pointed out by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg is scheduled to be unified for all policies and thus there won't
be one-to-one mapping from blkg to policy. Update stat related
functions to take explicit @pol or @plid arguments and not use
blkg->plid.
This is painful for now but most of specific stat interface functions
will be replaced with a handful of generic helpers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blkcg policy implementations manage blkg refcnt duplicating
mostly identical code in both policies. This patch moves refcnt to
blkg and let blkcg core handle refcnt and freeing of blkgs.
* cfq blkgs now also get freed via RCU.
* cfq blkgs lose RB_EMPTY_ROOT() sanity check on blkg free. If
necessary, we can add blkio_exit_group_fn() to resurrect this.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blkg's are embedded in private data blkcg policy private
data structure and thus allocated and freed by policies. This leads
to duplicate codes in policies, hinders implementing common part in
blkcg core with strong semantics, and forces duplicate blkg's for the
same cgroup-q association.
This patch introduces struct blkg_policy_data which is a separate data
structure chained from blkg. Policies specifies the amount of private
data it needs in its blkio_policy_type->pdata_size and blkcg core
takes care of allocating them along with blkg which can be accessed
using blkg_to_pdata(). blkg can be determined from pdata using
pdata_to_blkg(). blkio_alloc_group_fn() method is accordingly updated
to blkio_init_group_fn().
For consistency, tg_of_blkg() and cfqg_of_blkg() are replaced with
blkg_to_tg() and blkg_to_cfqg() respectively, and functions to map in
the reverse direction are added.
Except that policy specific data now lives in a separate data
structure from blkg, this patch doesn't introduce any functional
difference.
This will be used to unify blkg's for different policies.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blkg points to the associated blkcg via its css_id. This
unnecessarily complicates dereferencing blkcg. Let blkg hold a
reference to the associated blkcg and point directly to it and disable
css_id on blkio_subsys.
This change requires splitting blkiocg_destroy() into
blkiocg_pre_destroy() and blkiocg_destroy() so that all blkg's can be
destroyed and all the blkcg references held by them dropped during
cgroup removal.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg->dev is dev_t recording the device number of the block device for
the associated request_queue. It is used to identify the associated
block device when printing out configuration or stats.
This is redundant to begin with. A blkg is an association between a
cgroup and a request_queue and it of course is possible to reach
request_queue from blkg and synchronization conventions are in place
for safe q dereferencing, so this shouldn't be necessary from the
beginning. Furthermore, it's initialized by sscanf()ing the device
name of backing_dev_info. The mind boggles.
Anyways, if blkg is visible under rcu lock, we *know* that the
associated request_queue hasn't gone away yet and its bdi is
registered and alive - blkg can't be created for request_queue which
hasn't been fully initialized and it can't go away before blkg is
removed.
Let stat and conf read functions get device name from
blkg->q->backing_dev_info.dev and pass it down to printing functions
and remove blkg->dev.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg is very peculiar in that it allows setting and remembering
configurations for non-existent devices by maintaining separate data
structures for configuration.
This behavior is completely out of the usual norms and outright
confusing; furthermore, it uses dev_t number to match the
configuration to devices, which is unpredictable to begin with and
becomes completely unuseable if EXT_DEVT is fully used.
It is wholely unnecessary - we already have fully functional userland
mechanism to program devices being hotplugged which has full access to
device identification, connection topology and filesystem information.
Add a new struct blkio_group_conf which contains all blkcg
configurations to blkio_group and let blkio_group, which can be
created iff the associated device exists and is removed when the
associated device goes away, carry all configurations.
Note that, after this patch, all newly created blkg's will always have
the default configuration (unlimited for throttling and blkcg's weight
for propio).
This patch makes blkio_policy_node meaningless but doesn't remove it.
The next patch will.
-v2: Updated to retry after short sleep if blkg lookup/creation failed
due to the queue being temporarily bypassed as indicated by
-EBUSY return. Pointed out by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently both blk-throttle and cfq-iosched implement their own
blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This
patch factors out the common code into blkg_lookup_create(), which
returns ERR_PTR value so that transitional failures due to queue
bypass can be distinguished from other failures.
* New plkio_policy_ops methods blkio_alloc_group_fn() and
blkio_link_group_fn added. Both are transitional and will be
removed once the blkg management code is fully moved into
blk-cgroup.c.
* blkio_alloc_group_fn() allocates policy-specific blkg which is
usually a larger data structure with blkg as the first entry and
intiailizes it. Note that initialization of blkg proper, including
percpu stats, is responsibility of blk-cgroup proper.
Note that default config (weight, bps...) initialization is done
from this method; otherwise, we end up violating locking order
between blkcg and q locks via blkcg_get_CONF() functions.
* blkio_link_group_fn() is called under queue_lock and responsible for
linking the blkg to the queue. blkcg side is handled by blk-cgroup
proper.
* The common blkg creation function is named blkg_lookup_create() and
blkiocg_lookup_group() is renamed to blkg_lookup() for consistency.
Also, throtl / cfq related functions are similarly [re]named for
consistency.
This simplifies blkcg policy implementations and enables further
cleanup.
-v2: Vivek noticed that blkg_lookup_create() incorrectly tested
blk_queue_dead() instead of blk_queue_bypass() leading a user of
the function ending up creating a new blkg on bypassing queue.
This is a bug introduced while relocating bypass patches before
this one. Fixed.
-v3: ERR_PTR patch folded into this one. @for_root added to
blkg_lookup_create() to allow creating root group on a bypassed
queue during elevator switch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For root blkg, blk_throtl_init() was using throtl_alloc_tg()
explicitly and cfq_init_queue() was manually initializing embedded
cfqd->root_group, adding unnecessarily different code paths to blkg
handling.
Make both use the usual blkio_group get functions - throtl_get_tg()
and cfq_get_cfqg() - for the root blkio_group too. Note that
blk_throtl_init() callsite is pushed downwards in
blk_alloc_queue_node() so that @q is sufficiently initialized for
throtl_get_tg().
This simplifies root blkg handling noticeably for cfq and will allow
further modularization of blkcg API.
-v2: Vivek pointed out that using cfq_get_cfqg() won't work if
CONFIG_CFQ_GROUP_IOSCHED is disabled. Fix it by factoring out
initialization of base part of cfqg into cfq_init_cfqg_base() and
alloc/init/free explicitly if !CONFIG_CFQ_GROUP_IOSCHED.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkgio_group is association between a block cgroup and a queue for a
given policy. Using opaque void * for association makes things
confusing and hinders factoring of common code. Use request_queue *
and, if necessary, policy id instead.
This will help block cgroup API cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In both blkg get functions - throtl_get_tg() and cfq_get_cfqg(),
instead of obtaining blkcg of %current explicitly, let the caller
specify the blkcg to use as parameter and make both functions hold on
to the blkcg.
This is part of block cgroup interface cleanup and will help making
blkcg API more modular.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rcu_read_lock() in throtl_get_tb() and cfq_get_cfqg() holds onto
@blkcg while looking up blkg. For API cleanup, the next patch will
make the caller responsible for determining @blkcg to look blkg from
and let them specify it as a parameter. Move rcu read locking out to
the callers to prepare for the change.
-v2: Originally this patch was described as a fix for RCU read locking
bug around @blkg, which Vivek pointed out to be incorrect. It
was from misunderstanding the role of rcu locking as protecting
@blkg not @blkcg. Patch description updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Elevator switch may involve changes to blkcg policies. Implement
shoot down of blkio_groups.
Combined with the previous bypass updates, the end goal is updating
blkcg core such that it can ensure that blkcg's being affected become
quiescent and don't have any per-blkg data hanging around before
commencing any policy updates. Until queues are made aware of the
policies that applies to them, as an interim step, all per-policy blkg
data will be shot down.
* blk-throtl doesn't need this change as it can't be disabled for a
live queue; however, update it anyway as the scheduled blkg
unification requires this behavior change. This means that
blk-throtl configuration will be unnecessarily lost over elevator
switch. This oddity will be removed after blkcg learns to associate
individual policies with request_queues.
* blk-throtl dosen't shoot down root_tg. This is to ease transition.
Unified blkg will always have persistent root group and not shooting
down root_tg for now eases transition to that point by avoiding
having to update td->root_tg and is safe as blk-throtl can never be
disabled
-v2: Vivek pointed out that group list is not guaranteed to be empty
on return from clear function if it raced cgroup removal and
lost. Fix it by waiting a bit and retrying. This kludge will
soon be removed once locking is updated such that blkg is never
in limbo state between blkcg and request_queue locks.
blk-throtl no longer shoots down root_tg to avoid breaking
td->root_tg.
Also, Nest queue_lock inside blkio_list_lock not the other way
around to avoid introduce possible deadlock via blkcg lock.
-v3: blkcg_clear_queue() repositioned and renamed to
blkg_destroy_all() to increase consistency with later changes.
cfq_clear_queue() updated to check q->elevator before
dereferencing it to avoid NULL dereference on not fully
initialized queues (used by later change).
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator_ops->elevator_init_fn() has a weird return value. It returns
a void * which the caller should assign to q->elevator->elevator_data
and %NULL return denotes init failure.
Update such that it returns integer 0/-errno and sets elevator_data
directly as necessary.
This makes the interface more conventional and eases further cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq has been registering zeroed blkio_poilcy_cfq if CFQ_GROUP_IOSCHED
is disabled. This fortunately doesn't collide with blk-throtl as
BLKIO_POLICY_PROP is zero but is unnecessary and risky. Just don't
register it if not enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
icq->changed was used for ICQ_*_CHANGED bits. Rename it to flags and
access it under ioc->lock instead of using atomic bitops.
ioc_get_changed() is added so that the changed part can be fetched and
cleared as before.
icq->flags will be used to carry other flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Plug merge calls two elevator callbacks outside queue lock -
elevator_allow_merge_fn() and elevator_bio_merged_fn(). Although
attempt_plug_merge() suggests that elevator is guaranteed to be there
through the existing request on the plug list, nothing prevents plug
merge from calling into dying or initializing elevator.
For regular merges, bypass ensures elvpriv count to reach zero, which
in turn prevents merges as all !ELVPRIV requests get REQ_SOFTBARRIER
from forced back insertion. Plug merge doesn't check ELVPRIV, and, as
the requests haven't gone through elevator insertion yet, it doesn't
have SOFTBARRIER set allowing merges on a bypassed queue.
This, for example, leads to the following crash during elevator
switch.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0
PGD 112cbc067 PUD 115d5c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU 1
Modules linked in: deadline_iosched
Pid: 819, comm: dd Not tainted 3.3.0-rc2-work+ #76 Bochs Bochs
RIP: 0010:[<ffffffff813b34e9>] [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0
RSP: 0018:ffff8801143a38f8 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff88011817ce28 RCX: ffff880116eb6cc0
RDX: 0000000000000000 RSI: ffff880118056e20 RDI: ffff8801199512f8
RBP: ffff8801143a3908 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff880118195708
R13: ffff880118052aa0 R14: ffff8801143a3d50 R15: ffff880118195708
FS: 00007f19f82cb700(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 0000000112c6a000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process dd (pid: 819, threadinfo ffff8801143a2000, task ffff880116eb6cc0)
Stack:
ffff88011817ce28 ffff880118195708 ffff8801143a3928 ffffffff81391bba
ffff88011817ce28 ffff880118195708 ffff8801143a3948 ffffffff81391bf1
ffff88011817ce28 0000000000000000 ffff8801143a39a8 ffffffff81398e3e
Call Trace:
[<ffffffff81391bba>] elv_rq_merge_ok+0x4a/0x60
[<ffffffff81391bf1>] elv_try_merge+0x21/0x40
[<ffffffff81398e3e>] blk_queue_bio+0x8e/0x390
[<ffffffff81396a5a>] generic_make_request+0xca/0x100
[<ffffffff81396b04>] submit_bio+0x74/0x100
[<ffffffff811d45c2>] __blockdev_direct_IO+0x1ce2/0x3450
[<ffffffff811d0dc7>] blkdev_direct_IO+0x57/0x60
[<ffffffff811460b5>] generic_file_aio_read+0x6d5/0x760
[<ffffffff811986b2>] do_sync_read+0xe2/0x120
[<ffffffff81199345>] vfs_read+0xc5/0x180
[<ffffffff81199501>] sys_read+0x51/0x90
[<ffffffff81aeac12>] system_call_fastpath+0x16/0x1b
There are multiple ways to fix this including making plug merge check
ELVPRIV; however,
* Calling into elevator outside queue lock is confusing and
error-prone.
* Requests on plug list aren't known to the elevator. They aren't on
the elevator yet, so there's no elevator specific state to update.
* Given the nature of plug merges - collecting bio's for the same
purpose from the same issuer - elevator specific restrictions aren't
applicable.
So, simply don't call into elevator methods from plug merge by moving
elv_bio_merged() from bio_attempt_*_merge() to blk_queue_bio(), and
using blk_try_merge() in attempt_plug_merge().
This is based on Jens' patch to skip elevator_allow_merge_fn() from
plug merge.
Note that this makes per-cgroup merged stats skip plug merging.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4F16F3CA.90904@kernel.dk>
Original-patch-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
put_io_context() performed a complex trylock dancing to avoid
deferring ioc release to workqueue. It was also broken on UP because
trylock was always assumed to succeed which resulted in unbalanced
preemption count.
While there are ways to fix the UP breakage, even the most
pathological microbench (forced ioc allocation and tight fork/exit
loop) fails to show any appreciable performance benefit of the
optimization. Strip it out. If there turns out to be workloads which
are affected by this change, simpler optimization from the discussion
thread can be applied later.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1328514611.21268.66.camel@sli10-conroe>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq_slice_expired will change saved_workload_slice. It should be called
first so saved_workload_slice is correctly set to 0 after workload type
is changed.
This fixes the code order changed by 54b466e44b.
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All requests of a queue could be merged to other requests of other queue.
Such queue will not have request in it, but it's in service tree. This
will cause kernel oops.
I encounter a BUG_ON() in cfq_dispatch_request() with next patch, but the
issue should exist without the patch.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now block layer knows everything necessary to create and associate
icq's with requests. Move ioc_create_icq() to blk-ioc.c and update
get_request() such that, if elevator_type->icq_size is set, requests
are automatically associated with their matching icq's before
elv_set_request(). io_context reference is also managed by block core
on request alloc/free.
* Only ioprio/cgroup changed handling remains from cfq_get_cic().
Collapsed into cfq_set_request().
* This removes queue kicking on icq allocation failure (for now). As
icq allocation failure is rare and the only effect of queue kicking
achieved was possibily accelerating queue processing, this change
shouldn't be noticeable.
There is a larger underlying problem. Unlike request allocation,
icq allocation is not guaranteed to succeed eventually after
retries. The number of icq is unbound and thus mempool can't be the
solution either. This effectively adds allocation dependency on
memory free path and thus possibility of deadlock.
This usually wouldn't happen because icq allocation is not a hot
path and, even when the condition triggers, it's highly unlikely
that none of the writeback workers already has icq.
However, this is still possible especially if elevator is being
switched under high memory pressure, so we better get it fixed.
Probably the only solution is just bypassing elevator and appending
to dispatch queue on any elevator allocation failure.
* Comment added to explain how icq's are managed and synchronized.
This completes cleanup of io_context interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add elevator_ops->elevator_init_icq_fn() and restructure
cfq_create_cic() and rename it to ioc_create_icq().
The new function expects its caller to pass in io_context, uses
elevator_type->icq_cache, handles generic init, calls the new elevator
operation for elevator specific initialization, and returns pointer to
created or looked up icq. This leaves cfq_icq_pool variable without
any user. Removed.
This prepares for io_context interface cleanup and doesn't introduce
any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With kmem_cache managed by blk-ioc, io_cq exit/release can be moved to
blk-ioc too. The odd ->io_cq->exit/release() callbacks are replaced
with elevator_ops->elevator_exit_icq_fn() with unlinking from both ioc
and q, and freeing automatically handled by blk-ioc. The elevator
operation only need to perform exit operation specific to the elevator
- in cfq's case, exiting the cfqq's.
Also, clearing of io_cq's on q detach is moved to block core and
automatically performed on elevator switch and q release.
Because the q io_cq points to might be freed before RCU callback for
the io_cq runs, blk-ioc code should remember to which cache the io_cq
needs to be freed when the io_cq is released. New field
io_cq->__rcu_icq_cache is added for this purpose. As both the new
field and rcu_head are used only after io_cq is released and the
q/ioc_node fields aren't, they are put into unions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let elevators set ->icq_size and ->icq_align in elevator_type and
elv_register() and elv_unregister() respectively create and destroy
kmem_cache for icq.
* elv_register() now can return failure. All callers updated.
* icq caches are automatically named "ELVNAME_io_cq".
* cfq_slab_setup/kill() are collapsed into cfq_init/exit().
* While at it, minor indentation change for iosched_cfq.elevator_name
for consistency.
This will help moving icq management to block core. This doesn't
introduce any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that all io_cq related data structures are in block core layer,
io_cq lookup can be moved from cfq-iosched.c to blk-ioc.c.
Lookup logic from cfq_cic_lookup() is moved to ioc_lookup_icq() with
parameter return type changes (cfqd -> request_queue, cfq_io_cq ->
io_cq) and cfq_cic_lookup() becomes thin wrapper around
cfq_cic_lookup().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of icq management is about to be moved out of cfq into blk-ioc.
This patch prepares for it.
* Move cfqd->icq_list to request_queue->icq_list
* Make request explicitly point to icq instead of through elevator
private data. ->elevator_private[3] is replaced with sub struct elv
which contains icq pointer and priv[2]. cfq is updated accordingly.
* Meaningless clearing of ->elevator_private[0] removed from
elv_set_request(). At that point in code, the field was guaranteed
to be %NULL anyway.
This patch doesn't introduce any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently io_context and cfq logics are mixed without clear boundary.
Most of io_context is independent from cfq but cfq_io_context handling
logic is dispersed between generic ioc code and cfq.
cfq_io_context represents association between an io_context and a
request_queue, which is a concept useful outside of cfq, but it also
contains fields which are useful only to cfq.
This patch takes out generic part and put it into io_cq (io
context-queue) and the rest into cfq_io_cq (cic moniker remains the
same) which contains io_cq. The following changes are made together.
* cfq_ttime and cfq_io_cq now live in cfq-iosched.c.
* All related fields, functions and constants are renamed accordingly.
* ioc->ioc_data is now "struct io_cq *" instead of "void *" and
renamed to icq_hint.
This prepares for io_context API cleanup. Documentation is currently
sparse. It will be added later.
Changes in this patch are mechanical and don't cause functional
change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When called under queue_lock, current_io_context() triggers lockdep
warning if it hits allocation path. This is because io_context
installation is protected by task_lock which is not IRQ safe, so it
triggers irq-unsafe-lock -> irq -> irq-safe-lock -> irq-unsafe-lock
deadlock warning.
Given the restriction, accessor + creator rolled into one doesn't work
too well. Drop current_io_context() and let the users access
task->io_context directly inside queue_lock combined with explicit
creation using create_io_context().
Future ioc updates will further consolidate ioc access and the create
interface will be unexported.
While at it, relocate ioc internal interface declarations in blk.h and
add section comments before and after.
This patch does not introduce functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that lazy paths are removed, cfqd_dead_key() is meaningless and
cic->q can be used whereever cic->key is used. Kill cic->key.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that cic's are immediately unlinked under both locks, there's no
need to count and drain cic's before module unload. RCU callback
completion is waited with rcu_barrier().
While at it, remove residual RCU operations on cic_list.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that all cic's are immediately unlinked from both ioc and queue,
lazy dropping from lookup path and trimming on elevator unregister are
unnecessary. Kill them and remove now unused elevator_ops->trim().
This also leaves call_for_each_cic() without any user. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cic is association between io_context and request_queue. A cic is
linked from both ioc and q and should be destroyed when either one
goes away. As ioc and q both have their own locks, locking becomes a
bit complex - both orders work for removal from one but not from the
other.
Currently, cfq tries to circumvent this locking order issue with RCU.
ioc->lock nests inside queue_lock but the radix tree and cic's are
also protected by RCU allowing either side to walk their lists without
grabbing lock.
This rather unconventional use of RCU quickly devolves into extremely
fragile convolution. e.g. The following is from cfqd going away too
soon after ioc and q exits raced.
general protection fault: 0000 [#1] PREEMPT SMP
CPU 2
Modules linked in:
[ 88.503444]
Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs
RIP: 0010:[<ffffffff81397628>] [<ffffffff81397628>] cfq_exit_single_io_context+0x58/0xf0
...
Call Trace:
[<ffffffff81395a4a>] call_for_each_cic+0x5a/0x90
[<ffffffff81395ab5>] cfq_exit_io_context+0x15/0x20
[<ffffffff81389130>] exit_io_context+0x100/0x140
[<ffffffff81098a29>] do_exit+0x579/0x850
[<ffffffff81098d5b>] do_group_exit+0x5b/0xd0
[<ffffffff81098de7>] sys_exit_group+0x17/0x20
[<ffffffff81b02f2b>] system_call_fastpath+0x16/0x1b
The only real hot path here is cic lookup during request
initialization and avoiding extra locking requires very confined use
of RCU. This patch makes cic removal from both ioc and request_queue
perform double-locking and unlink immediately.
* From q side, the change is almost trivial as ioc->lock nests inside
queue_lock. It just needs to grab each ioc->lock as it walks
cic_list and unlink it.
* From ioc side, it's a bit more difficult because of inversed lock
order. ioc needs its lock to walk its cic_list but can't grab the
matching queue_lock and needs to perform unlock-relock dancing.
Unlinking is now wholly done from put_io_context() and fast path is
optimized by using the queue_lock the caller already holds, which is
by far the most common case. If the ioc accessed multiple devices,
it tries with trylock. In unlikely cases of fast path failure, it
falls back to full double-locking dance from workqueue.
Double-locking isn't the prettiest thing in the world but it's *far*
simpler and more understandable than RCU trick without adding any
meaningful overhead.
This still leaves a lot of now unnecessary RCU logics. Future patches
will trim them.
-v2: Vivek pointed out that cic->q was being dereferenced after
cic->release() was called. Updated to use local variable @this_q
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* cfq_cic_lookup() may be called without queue_lock and multiple tasks
can execute it simultaneously for the same shared ioc. Nothing
prevents them racing each other and trying to drop the same dead cic
entry multiple times.
* smp_wmb() in cfq_exit_cic() doesn't really do anything and nothing
prevents cfq_cic_lookup() seeing stale cic->key. This usually
doesn't blow up because by the time cic is exited, all requests have
been drained and new requests are terminated before going through
elevator. However, it can still be triggered by plug merge path
which doesn't grab queue_lock and thus can't check DEAD state
reliably.
This patch updates lookup locking such that,
* Lookup is always performed under queue_lock. This doesn't add any
more locking. The only issue is cfq_allow_merge() which can be
called from plug merge path without holding any lock. For now, this
is worked around by using cic of the request to merge into, which is
guaranteed to have the same ioc. For longer term, I think it would
be best to separate out plug merge method from regular one.
* Spurious ioc->lock locking around cic lookup hint assignment
dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq_get_io_context() would fail if multiple tasks race to insert cic's
for the same association. This patch restructures
cfq_get_io_context() such that slow path insertion race is handled
properly.
Note that the restructuring also makes cfq_get_io_context() called
under queue_lock and performs both ioc and cfqd insertions while
holding both ioc and queue locks. This is part of on-going locking
tightening and will be used to simplify synchronization rules.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioprio/cgroup change was handled by marking the changed state in ioc
and, on the following access to the ioc, performing RCU-protected
iteration through all cic's grabbing the matching queue_lock.
This patch moves the changed state to each cic. When ioprio or cgroup
changes, the respective bit is set on all cic's of the ioc and when
each of those cic (not ioc) is accessed, change is applied for that
specific ioc-queue pair.
This also fixes the following two race conditions between setting and
clearing of changed states.
* Missing barrier between assign/load of ioprio and ioprio_changed
allowed applying old ioprio.
* Change requests could happen between application of change and
clearing of changed variables.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the following changes to prepare for ioc/cic management cleanup.
* Add cic->q so that ioc can determine the associated queue without
querying cfq. This will eventually replace ->key.
* Factor out cfq_release_cic() from cic_free_func(). This function
assumes that the caller handled locking.
* Rename __cfq_exit_single_io_context() to cfq_exit_cic() and make it
take only @cic.
* Restructure cfq_cic_link() for future updates.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ignoring copy_io() during fork, io_context can be allocated from two
places - current_io_context() and set_task_ioprio(). The former is
always called from local task while the latter can be called from
different task. The synchornization between them are peculiar and
dubious.
* current_io_context() doesn't grab task_lock() and assumes that if it
saw %NULL ->io_context, it would stay that way until allocation and
assignment is complete. It has smp_wmb() between alloc/init and
assignment.
* set_task_ioprio() grabs task_lock() for assignment and does
smp_read_barrier_depends() between "ioc = task->io_context" and "if
(ioc)". Unfortunately, this doesn't achieve anything - the latter
is not a dependent load of the former. ie, if ioc itself were being
dereferenced "ioc->xxx", it would mean something (not sure what tho)
but as the code currently stands, the dependent read barrier is
noop.
As only one of the the two test-assignment sequences is task_lock()
protected, the task_lock() can't do much about race between the two.
Nothing prevents current_io_context() and set_task_ioprio() allocating
its own ioc for the same task and overwriting the other's.
Also, set_task_ioprio() can race with exiting task and create a new
ioc after exit_io_context() is finished.
ioc get/put doesn't have any reason to be complex. The only hot path
is accessing the existing ioc of %current, which is simple to achieve
given that ->io_context is never destroyed as long as the task is
alive. All other paths can happily go through task_lock() like all
other task sub structures without impacting anything.
This patch updates ioc get/put so that it becomes more conventional.
* alloc_io_context() is replaced with get_task_io_context(). This is
the only interface which can acquire access to ioc of another task.
On return, the caller has an explicit reference to the object which
should be put using put_io_context() afterwards.
* The functionality of current_io_context() remains the same but when
creating a new ioc, it shares the code path with
get_task_io_context() and always goes through task_lock().
* get_io_context() now means incrementing ref on an ioc which the
caller already has access to (be that an explicit refcnt or implicit
%current one).
* PF_EXITING inhibits creation of new io_context and once
exit_io_context() is finished, it's guaranteed that both ioc
acquisition functions return %NULL.
* All users are updated. Most are trivial but
smp_read_barrier_depends() removal from cfq_get_io_context() needs a
bit of explanation. I suppose the original intention was to ensure
ioc->ioprio is visible when set_task_ioprio() allocates new
io_context and installs it; however, this wouldn't have worked
because set_task_ioprio() doesn't have wmb between init and install.
There are other problems with this which will be fixed in another
patch.
* While at it, use NUMA_NO_NODE instead of -1 for wildcard node
specification.
-v2: Vivek spotted contamination from debug patch. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cfq allocates per-queue id using ida and uses it to index cic radix
tree from io_context. Move it to q->id and allocate on queue init and
free on queue release. This simplifies cfq a bit and will allow for
further improvements of io context life-cycle management.
This patch doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.
All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We have a kernel build regression since 3.1-rc1, which is about 10%
regression. The kernel source is in an ext3 filesystem.
Alex Shi bisect it to commit:
commit a07405b780
Author: Justin TerAvest <teravest@google.com>
Date: Sun Jul 10 22:09:19 2011 +0200
cfq: Remove special treatment for metadata rqs.
Apparently this is caused by lack metadata preemption, where ext3/ext4
do use READ_META. I didn't see a way to fix the issue, so suggest
reverting the patch.
This reverts commit a07405b780.
Reported-by: Alex Shi<alex.shi@intel.com>
Reported-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
FQ keeps track of number of groups which are linked on blkcg->blkg_list.
This is useful to avoid races between queue exit and cgroup exit code
paths. So if at the request queue exit time linked group count is not
zero, that means there are some group out there which is yet to be
deleted under rcu read period and queue exit code should wait for
on rcu period.
In my previous patch I forgot to decrease the number of group count.
So in current form, we nr_blkcg_linked_grps is always non-zero and
we will always wait one rcu period (if BLK_CGROUP=y). The side effect
of this is that it can increase boot time. I am surprised, nobody
complained so far.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently when the last queue of a group has no request, we don't expire
the queue to hope request from the group comes soon, so the group doesn't
miss its share. But if the think time is big, the assumption isn't correct
and we just waste bandwidth. In such case, we don't do idle.
[global]
runtime=30
direct=1
[test1]
cgroup=test1
cgroup_weight=1000
rw=randread
ioengine=libaio
size=500m
runtime=30
directory=/mnt
filename=file1
thinktime=9000
[test2]
cgroup=test2
cgroup_weight=1000
rw=randread
ioengine=libaio
size=500m
runtime=30
directory=/mnt
filename=file2
patched base
test1 64k 39k
test2 548k 540k
total 604k 578k
group1 gets much better throughput because it waits less time.
To check if the patch changes behavior of queue without think time. I also
tried to give test1 2ms think time or no think time. The test result is stable.
The thoughput doesn't change with/without the patch.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently when the last queue of a service tree has no request, we don't
expire the queue to hope request from the service tree comes soon, so the
service tree doesn't miss its share. But if the think time is big, the
assumption isn't correct and we just waste bandwidth. In such case, we
don't do idle.
[global]
runtime=10
direct=1
[test1]
rw=randread
ioengine=libaio
size=500m
directory=/mnt
filename=file1
thinktime=9000
[test2]
rw=read
ioengine=libaio
size=1G
directory=/mnt
filename=file2
patched base
test1 41k/s 33k/s
test2 15868k/s 15789k/s
total 15902k/s 15817k/s
A slightly better
To check if the patch changes behavior of queue without think time. I also
tried to give test1 2ms think time or no think time. The test has variation
even without the patch, but the average throughput doesn't change with/without
the patch.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Move the variables to do think time check to a sepatate struct. This is
to prepare adding think time check for service tree and group. No
functional change.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
fs_excl is a poor man's priority inheritance for filesystems to hint to
the block layer that an operation is important. It was never clearly
specified, not widely adopted, and will not prevent starvation in many
cases (like across cgroups).
fs_excl was introduced with the time sliced CFQ IO scheduler, to
indicate when a process held FS exclusive resources and thus needed
a boost.
It doesn't cover all file systems, and it was never fully complete.
Lets kill it.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There is no consistency among filesystems from what bios (or requests)
are marked as being metadata. It's interesting to expose this in traces,
but we shouldn't schedule the requests differently based on whether or
not they're marked as being metadata.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
ioc->ioc_data is rcu protectd, so uses correct API to access it.
This doesn't change any behavior, but just make code consistent.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: stable@kernel.org # after ab4bd22d
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
I got a rcu warnning at boot. the ioc->ioc_data is rcu_deferenced, but
doesn't hold rcu_read_lock.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: stable@kernel.org # after ab4bd22d
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Use the compiler to verify format strings and arguments.
Fix fallout.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Use the compiler to verify format strings and arguments.
Fix fallout.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Since we are modifying this RCU pointer, we need to hold
the lock protecting it around it.
This fixes a potential reuse and double free of a cfq
io_context structure. The bug has been in CFQ for a long
time, it hit very few people but those it did hit seemed
to see it a lot.
Tracked in RH bugzilla here:
https://bugzilla.redhat.com/show_bug.cgi?id=577968
Credit goes to Paul Bolle for figuring out that the issue
was around the one-hit ioc->ioc_data cache. Thanks to his
hard work the issue is now fixed.
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Since we are modifying this RCU pointer, we need to hold
the lock protecting it around it.
This fixes a potential reuse and double free of a cfq
io_context structure. The bug has been in CFQ for a long
time, it hit very few people but those it did hit seemed
to see it a lot.
Tracked in RH bugzilla here:
https://bugzilla.redhat.com/show_bug.cgi?id=577968
Credit goes to Paul Bolle for figuring out that the issue
was around the one-hit ioc->ioc_data cache. Thanks to his
hard work the issue is now fixed.
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Hi, Jens,
If you recall, I posted an RFC patch for this back in July of last year:
http://lkml.org/lkml/2010/7/13/279
The basic problem is that a process can issue a never-ending stream of
async direct I/Os to the same sector on a device, thus starving out
other I/O in the system (due to the way the alias handling works in both
cfq and deadline). The solution I proposed back then was to start
dispatching from the fifo after a certain number of aliases had been
dispatched. Vivek asked why we had to treat aliases differently at all,
and I never had a good answer. So, I put together a simple patch which
allows aliases to be added to the rb tree (it adds them to the right,
though that doesn't matter as the order isn't guaranteed anyway). I
think this is the preferred solution, as it doesn't break up time slices
in CFQ or batches in deadline. I've tested it, and it does solve the
starvation issue. Let me know what you think.
Cheers,
Jeff
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
queue_fail can only be reached if cic is NULL, so its check for cic must
be bogus.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When struct cfq_data allocation fails, cic_index need to be freed.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The 'group_changed' variable is initialized to 0 and never changed, so
checking the variable is meaningless.
It is a leftover from 0bbfeb8320 ("cfq-iosched: Always provide group
iosolation."). Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Reduce the number of bit operations in cfq_choose_req() on average
(and worst) cases.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Simplify the calculation in cfq_prio_to_maxrq(), plus replace CFQ_PRIO_LISTS to
IOPRIO_BE_NR since they are the same and IOPRIO_BE_NR looks more reasonable in
this context IMHO.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We allocated per cpu stats struct for root group but did not free it.
Fix it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently we take blkg_stat lock for even updating the stats. So even if
a group has no throttling rules (common case for root group), we end
up taking blkg_lock, for updating the stats.
Make dispatch stats per cpu so that these can be updated without taking
blkg lock.
If cpu goes offline, these stats simply disappear. No protection has
been provided for that yet. Do we really need anything for that?
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently, all the cfq_group or throtl_group allocations happen while
we are holding ->queue_lock and sleeping is not allowed.
Soon, we will move to per cpu stats and also need to allocate the
per group stats. As one can not call alloc_percpu() from atomic
context as it can sleep, we need to drop ->queue_lock, allocate the
group, retake the lock and continue processing.
In throttling code, I check the queue DEAD flag again to make sure
that driver did not call blk_cleanup_queue() in the mean time.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
blkg->key = cfqd is an rcu protected pointer and hence we used to do
call_rcu(cfqd->rcu_head) to free up cfqd after one rcu grace period.
The problem here is that even though cfqd is around, there are no
gurantees that associated request queue (td->queue) or q->queue_lock
is still around. A driver might have called blk_cleanup_queue() and
release the lock.
It might happen that after freeing up the lock we call
blkg->key->queue->queue_ock and crash. This is possible in following
path.
blkiocg_destroy()
blkio_unlink_group_fn()
cfq_unlink_blkio_group()
Hence, wait for an rcu peirod if there are groups which have not
been unlinked from blkcg->blkg_list. That way, if there are any groups
which are taking cfq_unlink_blkio_group() path, can safely take queue
lock.
This is how we have taken care of race in throttling logic also.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Nobody seems to be using cfq_find_alloc_cfqg() function parameter "create".
Get rid of that.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currentlly we first map the task to cgroup and then cgroup to
blkio_cgroup. There is a more direct way to get to blkio_cgroup
from task using task_subsys_state(). Use that.
The real reason for the fix is that it also avoids a race in generic
cgroup code. During remount/umount rebind_subsystems() is called and
it can do following with and rcu protection.
cgrp->subsys[i] = NULL;
That means if somebody got hold of cgroup under rcu and then it tried
to do cgroup->subsys[] to get to blkio_cgroup, it would get NULL which
is wrong. I was running into this race condition with ltp running on a
upstream derived kernel and that lead to crash.
So ideally we should also fix cgroup generic code to wait for rcu
grace period before setting pointer to NULL. Li Zefan is not very keen
on introducing synchronize_wait() as he thinks it will slow
down moun/remount/umount operations.
So for the time being atleast fix the kernel crash by taking a more
direct route to blkio_cgroup.
One tester had reported a crash while running LTP on a derived kernel
and with this fix crash is no more seen while the test has been
running for over 6 days.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
For some configurations of CONFIG_PREEMPT that is not true. So
get rid of __call_for_each_cic() and always uses the explicitly
rcu_read_lock() protected call_for_each_cic() instead.
This fixes a potential bug related to IO scheduler removal or
online switching.
Thanks to Paul McKenney for clarifying this.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly. I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Removing think time checking. A high thinktime queue might means the queue
dispatches several requests and then do away. Limitting such queue seems
meaningless. And also this can simplify code. This is suggested by Vivek.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
For v2, I added back lines to cfq_preempt_queue() that were removed
during updates for accounting unaccounted_time. Thanks for pointing out
that I'd missed these, Vivek.
Previous commit "cfq-iosched: Don't set active queue in preempt" wrongly
cleared stats for preempting queues when it shouldn't have, because when
we choose a queue to preempt, it still isn't necessarily scheduled next.
Thanks to Vivek Goyal for figuring this out and understanding how the
preemption code works.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Commit "Add unaccounted time to timeslice_used" changed the behavior of
cfq_preempt_queue to set cfqq active. Vivek pointed out that other
preemption rules might get involved, so we shouldn't manually set which
queue is active.
This cleans up the code to just clear the queue stats at preemption
time.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Version 3 is updated to apply to for-2.6.39/core.
For version 2, I took Vivek's advice and made sure we update the group
weight from cfq_group_service_tree_add().
If a weight was updated while a group is on the service tree, the
calculation for the total weight of the service tree can be adjusted
improperly, which either leads to bad service tree weights, or
potentially crashes (if total_weight becomes 0).
This patch defers updates to the weight until a group is off the service
tree.
Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
There are two kind of times that tasks are not charged for: the first
seek and the extra time slice used over the allocated timeslice. Both
of these exported as a new unaccounted_time stat.
I think it would be good to have this reported in 'time' as well, but
that is probably a separate discussion.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The update_vdisktime logic is broken since commit
b54ce60eb7, st->min_vdisktime never makes
a progress. Fix it.
Thanks Vivek for pointing it out.
Signed-off-by: Gui Jianfeng <guijianfen@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If there are a sync and an async queue and the sync queue's think time
is small, we can ignore the sync queue's dispatch quantum. Because the
sync queue will always preempt the async queue, we don't need to care
about async's latency. This can fix a performance regression of
aiostress test, which is introduced by commit f8ae6e3eb8. The issue
should exist even without the commit, but the commit amplifies the
impact.
The initial post does the same optimization for RT queue too, but since
I have no real workload for it, Vivek suggests to drop it.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This merge creates two set of conflicts. One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.
The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core. The conflict
isn't trivial but the resolution is straight-forward.
* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
should be called with @force_kblockd set to %true.
* elv_insert() in blk_kick_flush() should use
%ELEVATOR_INSERT_REQUEUE.
Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.
Signed-off-by: Tejun Heo <tj@kernel.org>
__blk_run_queue() automatically either calls q->request_fn() directly
or schedules kblockd depending on whether the function is recursed.
blk-flush implementation needs to be able to explicitly choose
kblockd. Add @force_kblockd.
All the current users are converted to specify %false for the
parameter and this patch doesn't introduce any behavior change.
stable: This is prerequisite for fixing ide oops caused by the new
blk-flush implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Effectively, make group_isolation=1 the default and remove the tunable.
The setting group_isolation=0 was because by default we idle on
sync-noidle tree and on fast devices, this can be very harmful for
throughput.
However, this problem can also be addressed by tuning slice_idle and
possibly group_idle on faster storage devices.
This change simplifies the CFQ code by removing the feature entirely.
Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Flush requests are never put on the IO scheduler. Convert request
structure's elevator_private* into an array and have the flush fields
share a union with it.
Reclaim the space lost in 'struct request' by moving 'completion_data'
back in the union with 'rb_node'.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Commit 7667aa0630 added logic to wait for
the last queue of the group to become busy (have at least one request),
so that the group does not lose out for not being continuously
backlogged. The commit did not check for the condition that the last
queue already has some requests. As a result, if the queue already has
requests, wait_busy is set. Later on, cfq_select_queue() checks the
flag, and decides that since the queue has a request now and wait_busy
is set, the queue is expired. This results in early expiration of the
queue.
This patch fixes the problem by adding a check to see if queue already
has requests. If it does, wait_busy is not set. As a result, time slices
do not expire early.
The queues with more than one request are usually buffered writers.
Testing shows improvement in isolation between buffered writers.
Cc: stable@kernel.org
Signed-off-by: Justin TerAvest <teravest@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
o Rename a function to give it more approprate name. We are calculating
cfq queue slice and function name gives the impression as if cfq group
slice length is being calculated.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If a queue is preempted before it gets slice assigned, the queue doesn't get
compensation, which looks unfair. For such queue, we compensate it for a whole
slice.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
I got this:
fio-874 [007] 2157.724514: 8,32 m N cfq874 preempt
fio-874 [007] 2157.724519: 8,32 m N cfq830 slice expired t=1
fio-874 [007] 2157.724520: 8,32 m N cfq830 sl_used=1 disp=0 charge=1 iops=0 sect=0
fio-874 [007] 2157.724521: 8,32 m N cfq830 set_active wl_prio:0 wl_type:0
fio-874 [007] 2157.724522: 8,32 m N cfq830 Not idling. st->count:1
cfq830 is an async queue, and preempted by a sync queue cfq874. But since we
have cfqg->saved_workload_slice mechanism, the preempt is a nop.
Looks currently our preempt is totally broken if the two queues are not from
the same workload type.
Below patch fixes it. This will might make async queue starvation, but it's
what our old code does before cgroup is added.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
cfq_group->ref is used with queue_lock hold, the only exception is
cfq_set_request, which looks like a bug to me, so ref doesn't need
to be an atomic and atomic operation is slower.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
cfq_queue->ref is used with queue_lock hold, so ref doesn't need to be an atomic
and atomic operation is slower.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When cfq_choose_cfqg() is called in select_queue(), there must be at least one
backlogged CFQ queue waiting for dispatching, hence there must be at least one
backlogged CFQ group on service tree. So we never call choose_service_tree()
with cfqg == NULL.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If priority is changed, continuing to check workload_expires and service tree
count of the previous workload does not make sense. We should always choose
the workload with lowest key of new priority in such case.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It's able to check whether a CFQ group on a service tree by
checking "cfqg->rb_node". There's no need to maintain an
extra flag here.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When a cfq group is running, it won't be dequeued from service tree, so
there's no need to store the active one in st->active. Just gid rid of it.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Vivek suggests we don't need schedule a dispatch when an idle queue
becomes nonidle. And he is right, cfq_should_preempt already covers
the logic.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If a deep seek queue slowly deliver requests but disk is much faster, idle
for the queue just wastes disk throughput. If the queue delevers all requests
before half its slice is used, the patch disable idle for it.
In my test, application delivers 32 requests one time, the disk can accept
128 requests at maxium and disk is fast. without the patch, the throughput
is just around 30m/s, while with it, the speed is about 80m/s. The disk is
a SSD, but is detected as a rotational disk. I can configure it as SSD, but
I thought the deep seek queue logic should be fixed too, for example,
considering a fast raid.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
A queue is idle at cfq_dispatch_requests(), but it gets noidle later. Unless
other task explictly does unplug or all requests are drained, we will not
deliever requests to the disk even cfq_arm_slice_timer doesn't make the
queue idle. For example, cfq_should_idle() returns true because of
service_tree->count == 1, and then other queues are added. Note, I didn't
see obvious performance impacts so far with the patch, but just thought
this could be a problem.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
cfq-iosched: Fix a gcc 4.5 warning and put some comments
block: Turn bvec_k{un,}map_irq() into static inline functions
block: fix accounting bug on cross partition merges
block: Make the integrity mapped property a bio flag
block: Fix double free in blk_integrity_unregister
block: Ensure physical block size is unsigned int
blkio-throttle: Fix possible multiplication overflow in iops calculations
blkio-throttle: limit max iops value to UINT_MAX
blkio-throttle: There is no need to convert jiffies to milli seconds
blkio-throttle: Fix link failure failure on i386
blkio: Recalculate the throttled bio dispatch time upon throttle limit change
blkio: Add root group to td->tg_list
blkio: deletion of a cgroup was causes oops
blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: revert bad fix for memory hotplug causing bounces
Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: Prevent hang_check firing during long I/O
cfq: improve fsync performance for small files
...
Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
- Andi encountedred following warning with gcc 4.5
linux/block/cfq-iosched.c: In function ‘cfq_dispatch_requests’:
linux/block/cfq-iosched.c:2156:3: warning: array subscript is above array
bounds
- Warning happens due to following code.
slice = group_slice * count /
max_t(unsigned, cfqg->busy_queues_avg[cfqd->serving_prio],
cfq_group_busy_queues_wl(cfqd->serving_prio, cfqd, cfqg));
gcc is complaining about cfqg->busy_queues_avg[] being indexed by CFQ
prio classes (RT, BE and IDLE) while the array size is only 2.
- At run time, we never access cfqg->busy_queues_avg[IDLE] and return from
function before this code hits.
- To fix warning increase the array size though it will remain unused. This
patch also puts some comments to clarify some of the confusions.
- I have taken Jens's patch and modified it a bit.
- Compile tested with gcc 4.4 and boot tested. I don't have gcc 4.5
running, Andi can you please test it with gcc 4.5 to make sure it
worked.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Tejun Heo