The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to
the data server (as opposed to the MDS) and the data server WRITE
is not NFS_FILE_SYNC.
Only whole file layout support means that there is only one IOMODE_RW layout
segment.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Tested-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement all the hooks created in the previous patches.
This requires exporting quite a few functions and adding a few
structure fields.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If a data server is unavailable, go through MDS.
Mark the deviceid containing the data server as a negative cache entry.
Do not try to connect to any data server on a deviceid marked as a negative
cache entry. Mark any layout that tries to use the marked deviceid as failed.
Inodes with a layout marked as fails will not use the layout for I/O, and will
not perform any more layoutgets.
Inodes without a layout will still do layoutget, but the layout will get
marked immediately.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need for generic cache with only one user.
Keep a simple hash of deviceids in the filelayout driver.
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate the rpc run portion of nfs_read_rpcsetup into a new function
nfs_initiate_read that is called for normal NFS I/O.
Add a pNFS read_pagelist function that is called instead of nfs_intitate_read
for pNFS reads.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the pnfs_update_layout call location to nfs_pageio_do_add_request().
Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach
it to each nfs_read_data so it can be sent to the layout driver.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a pg_test layout driver hook which is used to avoid coelescing I/O across
layout stripes.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare put_lseg and get_lseg to be called from the pNFS I/O code.
Pull common code from pnfs_lseg_locked to call from pnfs_lseg.
Inline pnfs_lseg_locked into it's only caller.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prevents an Oops triggered by CB_LAYOUTRECALL and LAYOUTGET race on a
pnfs_layout_hdr first pnfs_layout_segment.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The pnfs code was using throughout the lock order i_lock, cl_lock.
This conflicts with the nfs delegation code. Rework the pnfs code
to avoid taking both locks simultaneously.
Currently the code takes the double lock to add/remove the layout to a
nfs_client list, while atomically checking that the list of lsegs is
empty. To avoid this, we rely on existing serializations. When a
layout is initialized with lseg count equal zero, LAYOUTGET's
openstateid serialization is in effect, making it safe to assume it
stays zero unless we change it. And once a layout's lseg count drops
to zero, it is set as DESTROYED and so will stay at zero.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We do not need to clear the NFS_LAYOUT_BULK_RECALL, as setting it
guarantees that NFS_LAYOUT_DESTROYED will be set once any outstanding
io is finished.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The code could violate the following from RFC5661, section 12.5.3:
"Once a client has no more layouts on a file, the layout stateid is no
longer valid and MUST NOT be used."
This can occur when a layout already has a lseg, starts another
non-everlapping LAYOUTGET, and a CB_LAYOUTRECALL for the existing lseg
is processed before we hit pnfs_layout_process().
Solve by setting, each time the client has no more lsegs for a file, a
flag which blocks further use of the layout and triggers its removal.
This also fixes a second bug which occurs in the same instance as
above. If we actually use pnfs_layout_process, we add the new lseg to
the layout, but the layout has been removed from the nfs_client list
by the intervening CB_LAYOUTRECALL and will not be added back. Thus
the newly acquired lseg will not be properly returned in the event of
a subsequent CB_LAYOUTRECALL.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
What we really want to know is the ref count.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A layout can request return-on-close. How this interacts with the
forgetful model of never sending LAYOUTRETURNS is a bit ambiguous.
We forget any layouts marked roc, and wait for them to be completely
forgotten before continuing with the close. In addition, to compensate
for races with any inflight LAYOUTGETs, and the fact that we do not get
any layout stateid back from the server, we set the barrier to the worst
case scenario of current_seqid + number of outstanding LAYOUTGETS.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is the heart of the wave 2 submission. Add the code to trigger
drain and forget of any afected layouts. In addition, we set a
"barrier", below which any LAYOUTGET reply is ignored. This is to
compensate for the fact that we do not wait for outstanding LAYOUTGETs
to complete as per section 12.5.5.2.1 of RFC 5661.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This will be required to allow us to grab reference outside of i_lock.
While we are at it, make put_layout_hdr take the same argument as all the
related functions.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Either a bad server reply, or our ignoring of multiple array segments in
a reply, can cause a reply to not meet our requirements. Ensure
that we ignore such replies.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since this list will be used to search for layouts to recall,
this is necessary to avoid a race where the recall comes in,
sees there is nothing in the client list, and prepares to return
NOMATCHING, while the LAYOUTGET gets processed before the recall
updates the stateid.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs
using the previous stateid are completed. This requires choosing the
stateid to encode earlier, so we can abort if one is not available (we
want to use the open stateid, but a LAYOUTGET is already out using
it), and adding a count of the number of outstanding rpc calls using
layout state (which for now consist solely of LAYOUTGETs).
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is to prepare the way for sensible io draining. Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list. Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This prepares for future changes, where the layout state needs
to change atomically with several other variables. In particular,
it will need to know if lo->segs is empty, as we test that instead
of manipulating the NFS_LAYOUT_STATEID_SET bit. Moreover, the
layoutstateid is not really a read-mostly structure, as it is
written almost as often as it is read.
The behavior of pnfs_get_layout_stateid is also slightly changed, so that
it no longer changes the stateid. Its name is changed to +pnfs_choose_layoutget_stateid.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
While we are renaming all the fields, change lo->state to lo->plh_flags.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Comment references get_layout_hdr_locked, which never existed in
submitted code.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The initialize_mountpoint/uninitialise_mountpoint functions are really about
setting or clearing the layout driver to be used on this filesystem. Change
the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add the ability to actually send LAYOUTGET and GETDEVICEINFO. This also adds
in the machinery to handle layout state and the deviceid cache. Note that
GETDEVICEINFO is not called directly by the generic layer. Instead it
is called by the drivers while parsing the LAYOUTGET opaque data in response
to an unknown device id embedded therein. RFC 5661 only encodes
device ids within the driver-specific opaque data.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In particular, server reboot will invalidate all layouts.
Note that in order to have an active layout, we must get a successful response
from the server. To avoid adding that machinery, this patch just includes a
stub that fakes up a successful return. Since the layout is never referenced
for io, this is not a problem.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At the start of the io paths, try to grab the relevant layout
information. This will initiate the inode's layout cache, but
stubs ensure the cache stays empty.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow a module implementing a layout type to register, and
have its mount/umount routines called for filesystems that
the server declares support it.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Put in the infrastructure that uses information returned from the
server at mount to select a layout driver module.
In this patch, a stub is used that always returns "no driver found".
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Andy Adamson