The ABI should define only once each What. The current script
logic assumes that.
However, that's not the case, currently: there are several
symbols with a generic definition, and per-driver ones.
Better handle such cases, by preserving the cross-references
with the files that define them, but also track such
cases, producing warnings, as they should be fixed.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d7a73b8b3aae5b2bff9279996ff9ca4cdfc89196.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, the cross-references are generated on a single
step, when doing ReST output.
While this is nice optimization, it prevents auto-creating
cross-references for ABI symbols.
So, split it into a separate logic.
While here, turn on Perl warnings, as it helps to debug
problems inside the script.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/dbc97c8c2dfd877921f058134c35b2a8b1f8414b.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original parser for indentation were relying on having
just one description for each "what". However, that's not
the case: there are a number of ABI symbols that got defined
multiple times.
Improve the parser for it to better handle descriptions
if entries are duplicated.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/eb458bb30be0e5a89192d6057b2e8a7e910dbcb8.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The get_abi.pl reads a lot of files and can join them on a
single output file. Store where each "What:" output came from,
in order to be able to optionally display it.
This is useful for the Sphinx extension, with can now be
able to blame what ABI file has issues, and on what line
the What: description with problems begin.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/befc387011c5e3c6febd285b7f27610e41c90260.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the source ABI file is using ReST notation, the script
should handle whitespaces and lines with care, as otherwise
the file won't be properly recognized.
Address the bugs that are on such part of the script.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5c22c54fbd0cda797b691d52c568be6d0d1079d8.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, several ABI files won't parse as ReST, as they
contain severe violations to the spec, with makes the script
to crash.
So, the code has a sanity logic with escapes bad code and
cleans tags that can cause Sphinx to crash.
Add support for disabling this mode.
Right now, as enabling rst-mode causes crash, it is disabled
by default.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/34b691e3002e8987c24d851fe37640f95e506a92.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sphinx C domain code after 3.2.1 will start complaning if :c:struct
would be used for an union type:
.../Documentation/gpu/drm-kms-helpers:352: ../drivers/video/hdmi.c:851: WARNING: C 'identifier' cross-reference uses wrong tag: reference name is 'union hdmi_infoframe' but found name is 'struct hdmi_infoframe'. Full reference name is 'union hdmi_infoframe'. Full found name is 'struct hdmi_infoframe'.
So, let's address this issue too in advance, in order to
avoid future issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6e4ec3eec914df62389a299797a3880ae4490f35.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The include/linux/genalloc.h file defined this typedef:
typedef unsigned long (*genpool_algo_t)(unsigned long *map,unsigned long size,unsigned long start,unsigned int nr,void *data, struct gen_pool *pool, unsigned long start_addr);
Because it has a type composite of two words (unsigned long),
the parser gets the typedef name wrong:
.. c:macro:: long
**Typedef**: Allocation callback function type definition
Fix the regex in order to accept composite types when
defining a typedef for a function pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/328e8018041cc44f7a1684e57f8d111230761c4f.1603792384.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.
If GIT_DIR is unset, keep using the current ".git" default.
Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late
in the 5.9 cycle started depending on a return code from
a function which changed with the 5.10 PR from the usb subsystem
Current release - regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous releases - regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu()
to synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems;
the property is not populated correctly by the firmware,
but firmware configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is
light and only wants to schedule napi (and do so through
a _irqoff() variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ceke
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
- Remove unused for useless code from qconf
- Allow to edit "int", "hex", "string" options in place, and remove the
separate edit box from qconf
-----BEGIN PGP SIGNATURE-----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=YN7k
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- Remove unused or useless code from qconf
- Allow to edit "int", "hex", "string" options in place, and remove the
separate edit box from qconf
* tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: create QApplication after option checks
kconfig: qconf: remove Y, M, N columns
kconfig: qconf: remove ConfigView class
kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView
kconfig: qconf: remove ConfigLineEdit class
kconfig: qconf: allow to edit "int", "hex", "string" menus in-place
kconfig: qconf: show data column all the time
kconfig: qconf: move ConfigView::updateList(All) to ConfigList class
kconfig: qconf: remove unused ConfigItem::okRename()
kconfig: qconf: update the intro message to match to the current code
kconfig: qconf: reformat the intro message
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Based on the discussion in [0], update the bpf_redirect_neigh() helper to
accept an optional parameter specifying the nexthop information. This makes
it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without
incurring a duplicate FIB lookup - since the FIB lookup helper will return
the nexthop information even if no neighbour is present, this can simply
be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns
BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen.
[0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk
`hostname` may not be present on some systems as it's not mandated by
POSIX/SUSv4. This isn't just a theoretical problem: on Arch Linux,
`hostname` is provided by `inetutils`, which isn't part of the base
distribution.
./scripts/mkcompile_h: line 38: hostname: command not found
Use `uname -n` instead, which is more likely to be available (and
mandated by standards).
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After commit 43fee2b238 ("kbuild: do not redirect the first
prerequisite for filechk"), the rule is no longer automatically passed
$< as stdin, so remove the stale comment.
Fixes: 43fee2b238 ("kbuild: do not redirect the first prerequisite for filechk")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This change removes all instances of DISABLE_LTO from
Makefiles, as they are currently unused, and the preferred
method of disabling LTO is to filter out the flags instead.
Note added by Masahiro Yamada:
DISABLE_LTO was added as preparation for GCC LTO, but GCC LTO was
not pulled into the mainline. (https://lkml.org/lkml/2014/4/8/272)
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Check that alloc and free types of functions match each other.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
-----BEGIN PGP SIGNATURE-----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=26wi
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
Merge more updates from Andrew Morton:
"155 patches.
Subsystems affected by this patch series: mm (dax, debug, thp,
readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
romfs, and fault-injection"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
lib, uaccess: add failure injection to usercopy functions
lib, include/linux: add usercopy failure capability
ROMFS: support inode blocks calculation
ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
sched.h: drop in_ubsan field when UBSAN is in trap mode
scripts/gdb/tasks: add headers and improve spacing format
scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
kernel/relay.c: drop unneeded initialization
panic: dump registers on panic_on_warn
rapidio: fix the missed put_device() for rio_mport_add_riodev
rapidio: fix error handling path
nilfs2: fix some kernel-doc warnings for nilfs2
autofs: harden ioctl table
ramfs: fix nommu mmap with gaps in the page cache
mm: remove the now-unnecessary mmget_still_valid() hack
mm/gup: take mmap_lock in get_dump_page()
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
coredump: rework elf/elf_fdpic vma_dump_size() into common helper
coredump: refactor page range dumping into common helper
coredump: let dump_emit() bail out on short writes
...
When the kernel is compiled with Clang, -fsanitize=bounds expands to
-fsanitize=array-bounds and -fsanitize=local-bounds.
Enabling -fsanitize=local-bounds with Clang has the unfortunate
side-effect of inserting traps; this goes back to its original intent,
which was as a hardening and not a debugging feature [1]. The same
feature made its way into -fsanitize=bounds, but the traps remained. For
that reason, -fsanitize=bounds was split into 'array-bounds' and
'local-bounds' [2].
Since 'local-bounds' doesn't behave like a normal sanitizer, enable it
with Clang only if trapping behaviour was requested by
CONFIG_UBSAN_TRAP=y.
Add the UBSAN_BOUNDS_LOCAL config to Kconfig.ubsan to enable the
'local-bounds' option by default when UBSAN_TRAP is enabled.
[1] http://lists.llvm.org/pipermail/llvm-dev/2012-May/049972.html
[2] http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20131021/091536.html
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Brazdil <dbrazdil@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lkml.kernel.org/r/20200922074330.2549523-1-georgepope@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The author signed-off-by checks are currently very vague. Cases like same
name or same address are not handled separately.
For example, running checkpatch on commit be6577af0c ("parisc: Add
atomic64_set_release() define to avoid CPU soft lockups"), gives:
WARNING: Missing Signed-off-by: line by nominal patch author
'John David Anglin <dave.anglin@bell.net>'
The signoff line was:
"Signed-off-by: Dave Anglin <dave.anglin@bell.net>"
Clearly the author has signed off but with a slightly different version
of his name. A more appropriate warning would have been to point out
at the name mismatch instead.
Previously, the values assumed by $authorsignoff were either 0 or 1
to indicate whether a proper sign off by author is present.
Extended the checks to handle four new cases.
$authorsignoff values now denote the following:
0: Missing sign off by patch author.
1: Sign off present and identical.
2: Addresses and names match, but comments differ.
"James Watson(JW) <james@gmail.com>", "James Watson <james@gmail.com>"
3: Addresses match, but names are different.
"James Watson <james@gmail.com>", "James <james@gmail.com>"
4: Names match, but addresses are different.
"James Watson <james@watson.com>", "James Watson <james@gmail.com>"
5: Names match, addresses excluding subaddress details (RFC 5233) match.
"James Watson <james@gmail.com>", "James Watson <james+a@gmail.com>"
Also introduced a new message type FROM_SIGN_OFF_MISMATCH
for cases 2, 3, 4 and 5.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/linux-kernel-mentees/c1ca28e77e8e3bfa7aadf3efa8ed70f97a9d369c.camel@perches.com/
Link: https://lkml.kernel.org/r/20201007192029.551744-1-dwaipayanray1@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid false positives in presence of SPDX-License-Identifier in
networking files it is required to increase the leeway for empty block
comment lines by one line.
For example, checking drivers/net/loopback.c which starts with
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
rsults in an unnecessary warning
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Bartłomiej Żolnierkiewicz <b.zolnierkie@samsung.co>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lkml.kernel.org/r/20201006083509.19934-1-l.stelmach@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Checkpatch.pl doesn't have a check for excluding while (...) {...} blocks
from MULTISTATEMENT_MACRO_USE_DO_WHILE error.
For example, running checkpatch.pl on the file mm/maccess.c in the kernel
generates the following error:
ERROR: Macros with complex values should be enclosed in parentheses
+#define copy_from_kernel_nofault_loop(dst, src, len, type, err_label) \
+ while (len >= sizeof(type)) { \
+ __get_kernel_nofault(dst, src, type, err_label); \
+ dst += sizeof(type); \
+ src += sizeof(type); \
+ len -= sizeof(type); \
+ }
The error is misleading for this case. Enclosing it in parentheses
doesn't make any sense.
Checkpatch already has an exception list for such common macro types.
Added a new exception for while (...) {...} style blocks to the same.
In addition, the brace flatten logic was modified by changing the
substitution characters from "1" to "1u". This was done to ensure that
macros in the form "#define foo(bar) while(bar){bar--;}" were also
correctly procecssed.
Link: https://lore.kernel.org/linux-kernel-mentees/dc985938aa3986702815a0bd68dfca8a03c85447.camel@perches.com/
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201001171903.312021-1-dwaipayanray1@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Embedding the complete filename path inside the file isn't particularly
useful as often the path is moved around and becomes incorrect.
Emit a warning when the source contains the filename.
[akpm@linux-foundation.org: remove stray " di"]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/1fd5f9188a14acdca703ca00301ee323de672a8d.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Checkpatch did not handle cases where the author From: header was split
into multiple lines. The author identity could not be resolved and
checkpatch generated a false NO_AUTHOR_SIGN_OFF warning.
A typical example is commit e33bcbab16 ("tee: add support for session's
client UUID generation"). When checkpatch was run on this commit, it
displayed:
"WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal
patch author ''"
This was due to split header lines not being handled properly and the
author himself wrote in commit cd2614967d ("checkpatch: warn if missing
author Signed-off-by"):
"Split From: headers are not fully handled: only the first part
is compared."
Support split From: headers by correctly parsing the header extension
lines. RFC 5322, Section-2.2.3 stated that each extended line must start
with a WSP character (a space or htab). The solution was therefore to
concatenate the lines which start with a WSP to get the correct long
header.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/linux-kernel-mentees/f5d8124e54a50480b0a9fa638787bc29b6e09854.camel@perches.com/
Link: https://lkml.kernel.org/r/20200921085436.63003-1-dwaipayanray1@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a file exists in git and checkpatch is used without the -f flag for
scanning a file, then checkpatch will scan the file assuming it's a patch
and emit:
ERROR: Does not appear to be a unified-diff format patch
Change the behavior to assume the -f flag if the file exists in git.
[joe@perches.com: fix git "fatal" warning if file argument outside kernel tree]
Link: https://lkml.kernel.org/r/b6afa04112d450c2fc120a308d706acd60cee294.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Julia Lawall <julia.lawall@inria.fr>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lkml.kernel.org/r/45b81a48e1568bd0126a96f5046eb7aaae9b83c9.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The uninitialized_var() macro was removed recently via commit 63a0895d96
("compiler: Remove uninitialized_var() macro") as it's not a particularly
useful warning and its use can "paper over real bugs".
Add a checkpatch test to warn on self-assignments as a means to avoid
compiler warnings and as a back-door mechanism to reproduce the old
uninitialized_var macro behavior.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Denis Efremov <efremov@linux.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Link: https://lkml.kernel.org/r/afc2cffdd315d3e4394af149278df9e8af7f49f4.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All usages of include/linux of these are const pointers, and all instances
in the kernel except one, that are not const can be made const (patches
have been posted for those separately).
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lkml.kernel.org/r/20200830224352.37114-1-rikard.falkeborn@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
trace_printk is meant as a debugging tool, and should not be compiled into
production code without specific debug Kconfig options enabled, or source
code changes, as indicated by the warning that shows up on boot if any
trace_printk is called:
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
** **
** trace_printk() being used. Allocating extra memory. **
** **
** This means that this is a DEBUG kernel and it is **
** unsafe for production use. **
Let's warn developers when they try to submit such a change.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200825193600.v2.1.I723c43c155f02f726c97501be77984f1e6bb740a@changeid
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All usages of phy_ops in include/linux uses const phy_ops * and all
instances of phy_ops in the kernel that are not const already can be made
const (patches have been posted for those separately).
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200824214132.9072-1-rikard.falkeborn@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are commas used as statement terminations that should typically have
used semicolons instead. Only direct assignments or use of a single
function or value on a single line are detected by this test.
e.g.:
foo = bar(), /* typical use is semicolon not comma */
bar = baz();
Add an imperfect test to detect these comma uses.
No false positives were found in testing, but many types of false
negatives are possible.
e.g.:
foo = bar() + 1, /* comma use, but not direct assignment */
bar = baz();
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/3bf27caf462007dfa75647b040ab3191374a59de.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently this test only works on .[ch] files.
Move the test to check more file types and the commit log.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/180b3b5677771c902b2e2f7a2b7090ede65fe004.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kconfig allows to customize the CONFIG_ prefix via the $CONFIG_
environment variable. Out-of-tree projects may therefore use Kconfig with
a different prefix, or they may use a custom configuration tool which does
not use the CONFIG_ prefix at all. Such projects may still want to adhere
to the Linux kernel coding style and run checkpatch.pl.
One example is OP-TEE [1] which does not use Kconfig but does have
configuration options prefixed with CFG_. It also mostly follows the
kernel coding style and therefore being able to use checkpatch is quite
valuable.
To make this possible, add the --kconfig-prefix command line option.
[1] https://github.com/OP-TEE/optee_os
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200818081732.800449-1-jerome@forissier.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MAINTAINERS files generally have no specific maintainer but are updated by
individuals for subsystems all over the source tree.
Exclude MAINTAINERS file(s) from --git-fallback searches so the unlucky
individuals that update the files the most are not shown by default.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/2bacb0a9c06fbb6d56a43bf930e808c74243c908.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's somewhat common for me to ask get_maintainer to tell me who maintains
a patch file rather than the files modified by the patch.
Emit a warning if using get_maintainer.pl -f <patchfile>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/f63229c051567041819f25e76f49d83c6e4c0f71.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
While iterating over child nodes with the for_each functions, if
control is transferred from the middle of the loop, as in the case
of a break or return or goto, there is no decrement in the
reference counter thus ultimately resulting in a memory leak.
Add this script to detect potential memory leaks caused by
the absence of of_node_put() before break, goto, or, return
statements which transfer control outside the loop.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
There are a few namespace clashes by using c:macro everywhere:
basically, when using it, we can't have something like:
.. c:struct:: pwm_capture
.. c:macro:: pwm_capture
So, we need to use, instead:
.. c:function:: int pwm_capture (struct pwm_device * pwm, struct pwm_capture * result, unsigned long timeout)
for the function declaration.
The kernel-doc change was proposed by Jakob Lykke Andersen here:
6fd2076ec0
Although I did a different implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Address several issues related to pointing to the wrong line
number:
1) ensure that line numbers will always be initialized
When section is the default (Description), the line number
is not initializing, producing this:
$ ./scripts/kernel-doc --enable-lineno ./drivers/media/v4l2-core/v4l2-mem2mem.c|less
**Description**
#define LINENO 0
In case of streamoff or release called on any context,
1] If the context is currently running, then abort job will be called
2] If the context is queued, then the context will be removed from
the job_queue
Which is not right. Ensure that the line number will always
be there. After applied, the result now points to the right location:
**Description**
#define LINENO 410
In case of streamoff or release called on any context,
1] If the context is currently running, then abort job will be called
2] If the context is queued, then the context will be removed from
the job_queue
2) The line numbers for function prototypes are always + 1,
because it is taken at the line after handling the prototype.
Change the logic to point to the next line after the /** */
block;
3) The "DOC:" line number should point to the same line as this
markup is found, and not to the next one.
Probably part of the issues were due to a but that was causing
the line number offset to be incremented by one, if --export
were used.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When kernel-doc is called via kerneldoc.py, there's no need to
auto-detect the Sphinx version, as the Sphinx module already
knows it. So, add an optional parameter to allow changing the
Sphinx dialect.
As kernel-doc can also be manually called, keep the auto-detection
logic if the parameter was not specified. On such case, emit
a warning if sphinx-build can't be found at PATH.
I ended using a suggestion from Joe for using a more readable
regex, instead of using a complex one with a hidden group like:
m/^(\d+)\.(\d+)(?:\.?(\d+)?)/
in order to get the optional <patch> argument.
Thanks-to: Joe Perches <joe@perches.com>
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While kernel-doc needs to parse parameters in order to
identify its name, it shouldn't be touching the type,
as parsing it is very difficult, and errors happen.
One current error is when parsing this parameter:
const u32 (*tab)[256]
Found at ./lib/crc32.c, on this function:
u32 __pure crc32_be_generic (u32 crc, unsigned char const *p, size_t len, const u32 (*tab)[256], u32 polynomial);
The current logic mangles it, producing this output:
const u32 ( *tab
That's something that it is not recognizeable.
So, instead, let's push the argument as-is, and use it
when printing the function prototype and when describing
each argument.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some typedef expressions are output as normal functions.
As we need to be clearer about the type with Sphinx 3.x,
detect such cases.
While here, fix a wrongly-indented block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, the build system doesn't use -nofunction, as
it is pretty much useless, because it doesn't consider
the other output modes (extern, internal), working only
with all.
Also, it is limited to exclude functions.
Re-implement it in order to allow excluding any symbols from
the document output, no matter what mode is used.
The parameter was also renamed to "-nosymbol", as it express
better its meaning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's currently a bug with the way kernel-doc script
counts line numbers that can be seen with:
$ ./scripts/kernel-doc -rst -enable-lineno include/linux/math64.h >all && ./scripts/kernel-doc -rst -internal -enable-lineno include/linux/math64.h >int && diff -U0 int all
--- int 2020-09-28 12:58:08.927486808 +0200
+++ all 2020-09-28 12:58:08.905486845 +0200
@@ -1 +1 @@
-#define LINENO 27
+#define LINENO 26
@@ -3 +3 @@
-#define LINENO 16
+#define LINENO 15
@@ -9 +9 @@
-#define LINENO 17
+#define LINENO 16
...
This is happening with perl version 5.30.3, but I'm not
so sure if this is a perl bug, or if this is due to something
else.
In any case, fixing it is easy. Basically, when "-internal"
parameter is used, the process_export_file() function opens the
handle "IN". This makes the line number to be incremented, as the
handler for the main open is also "IN".
Fix the problem by using a different handler for the
main open().
While here, add a missing close for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Unfortunately, Sphinx 3.x parser for c functions is too pedantic:
https://github.com/sphinx-doc/sphinx/issues/8241
While it could be relaxed with some configurations, there are
several corner cases that it would make it hard to maintain,
and will require teaching conf.py about several macros.
So, let's instead use the :c:macro notation. This will
produce an output that it is not as nice as currently, but it
should still be acceptable, and will provide cross-references,
removing thousands of warnings when building with newer
versions of Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With Sphinx 3.x, the ".. c:type:" tag was changed to accept either:
.. c:type:: typedef-like declaration
.. c:type:: name
Using it for other types (including functions) don't work anymore.
So, there are newer tags for macro, enum, struct, union, and others,
which doesn't exist on older versions.
Add a check for the Sphinx version and change the produced tags
accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PHY kernel-doc markup has gained support for documenting
a typedef enum.
However, right now the parser was not prepared for it.
So, add support for parsing it.
Fixes: 4069a572d4 ("net: phy: Document core PHY structures")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of
our documentation using them
- add Zlib license as "deprecated" but required because we have
code with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c6oA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl35ACg2i+pP5CBExSzQUtA1Tx/UD2CVNMAoIAQChwj
SHZurDuyHkEiCdB+5n1u
=C9qR
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of our
documentation using them
- add Zlib license as "deprecated" but required because we have code
with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues"
* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
scripts/spdxcheck.py: handle license identifiers in XML comments
net/mlx5: IPsec: make spdxcheck.py happy
LICENSES/deprecated: add Zlib license text
LICENSE: add GFDL deprecated licenses
net/qla3xxx: Convert to SPDX license identifiers
net/qlge: Convert to SPDX license identifiers
net/qlcnic: Convert to SPDX license identifiers
scsi/qla2xxx: Convert to SPDX license identifiers
scsi/qla4xxx: Convert to SPDX license identifiers
Here is the "big" set of driver core patches for 5.10-rc1
They include a lot of different things, all related to the driver core
and/or some driver logic:
- sysfs common write functions to make it easier to audit sysfs
attributes
- device connection cleanups and fixes
- devm helpers for a few functions
- NOIO allocations for when devices are being removed
- minor cleanups and fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c4yA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylS7gCfcS+7/PE42eXxMY0z8rBX8aDMadIAn2DVEghA
Eoh9UoMEW4g1uMKORA0c
=CVAW
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.10-rc1
They include a lot of different things, all related to the driver core
and/or some driver logic:
- sysfs common write functions to make it easier to audit sysfs
attributes
- device connection cleanups and fixes
- devm helpers for a few functions
- NOIO allocations for when devices are being removed
- minor cleanups and fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
regmap: debugfs: use semicolons rather than commas to separate statements
platform/x86: intel_pmc_core: do not create a static struct device
drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show
mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
drivers core: Miscellaneous changes for sysfs_emit
drivers core: Reindent a couple uses around sysfs_emit
drivers core: Remove strcat uses around sysfs_emit and neaten
drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output
dyndbg: use keyword, arg varnames for query term pairs
driver core: force NOIO allocations during unplug
platform_device: switch to simpler IDA interface
driver core: platform: Document return type of more functions
Revert "driver core: Annotate dev_err_probe() with __must_check"
Revert "test_firmware: Test platform fw loading on non-EFI systems"
iio: adc: xilinx-xadc: use devm_krealloc()
hwmon: pmbus: use more devres helpers
devres: provide devm_krealloc()
syscore: Use pm_pr_dbg() for syscore_{suspend,resume}()
...
- Update dtc to upstream version v1.6.0-31-gcbca977ea121
- dtx_diff help text reformatting
- Speed-up validation time for binding and dtb checks using json for
intermediate files
- Add support for running yamllint on DT schema files
- Remove old booting-without-of.rst
- Extend the example schema to address common issues
- Cleanup handling of additionalProperties/unevaluatedProperties
- Ensure all DSI controller schemas reference dsi-controller.yaml
- Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex, DFI,
and Cisco Meraki
- Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
schema
- Convert HiSilicon SoC and syscon bindings to DT schema
- Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema
- Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR,
SATA, vf610 GPIO, and UART to DT schema
- Add i.MX 8M compatible strings
- Add LM81 and DS1780 as trivial devices
- Various missing properties added to fix dtb validation warnings
-----BEGIN PGP SIGNATURE-----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=gL4K
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Update dtc to upstream version v1.6.0-31-gcbca977ea121
- dtx_diff help text reformatting
- Speed-up validation time for binding and dtb checks using json for
intermediate files
- Add support for running yamllint on DT schema files
- Remove old booting-without-of.rst
- Extend the example schema to address common issues
- Cleanup handling of additionalProperties/unevaluatedProperties
- Ensure all DSI controller schemas reference dsi-controller.yaml
- Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
DFI, and Cisco Meraki
- Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
schema
- Convert HiSilicon SoC and syscon bindings to DT schema
- Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema
- Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
GPIO, and UART to DT schema
- Add i.MX 8M compatible strings
- Add LM81 and DS1780 as trivial devices
- Various missing properties added to fix dtb validation warnings
* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
dt-bindings: misc: explicitly add #address-cells for slave mode
spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
dt: Remove booting-without-of.rst
dt-bindings: update usb-c-connector example
dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
dt-bindings: pwm: imx: document i.MX compatibles
scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
dt-bindings: Add running yamllint to dt_binding_check
dt-bindings: powerpc: Add a schema for the 'sleep' property
dt-bindings: pinctrl: sirf: Fix typo abitrary
dt-bindings: pinctrl: qcom: Fix typo abitrary
dt-bindings: Explicitly allow additional properties in common schemas
dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
dt-bindings: Add missing 'unevaluatedProperties'
Docs: Fixing spelling errors in Documentation/devicetree/bindings/
dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
dt-bindings: riscv: convert pwm bindings to json-schema
dt-bindings: riscv: convert plic bindings to json-schema
dt-bindings: fu540: prci: convert PRCI bindings to json-schema
...
Merge misc updates from Andrew Morton:
"181 patches.
Subsystems affected by this patch series: kbuild, scripts, ntfs,
ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
memory-failure, vmallo and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
mm/migrate: remove obsolete comment about device public
mm/migrate: remove cpages-- in migrate_vma_finalize()
mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
memblock: use separate iterators for memory and reserved regions
memblock: implement for_each_reserved_mem_region() using __next_mem_region()
memblock: remove unused memblock_mem_size()
x86/setup: simplify reserve_crashkernel()
x86/setup: simplify initrd relocation and reservation
arch, drivers: replace for_each_membock() with for_each_mem_range()
arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
memblock: reduce number of parameters in for_each_mem_range()
memblock: make memblock_debug and related functionality private
memblock: make for_each_memblock_type() iterator private
mircoblaze: drop unneeded NUMA and sparsemem initializations
riscv: drop unneeded node initialization
h8300, nds32, openrisc: simplify detection of memory extents
arm64: numa: simplify dummy_numa_init()
arm, xtensa: simplify initialization of high memory pages
dma-contiguous: simplify cma_early_percent_memory()
KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
...
Hard-code the names of linux-headers and debug packages in the
control file.
The kernel package is different for ARCH=um. Change the code
for better readability.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 269a535ca9 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), with CONFIG_MODULES disabled,
"make deb-pkg" (or "make bindeb-pkg") fails with:
find: ‘Module.symvers’: No such file or directory
If CONFIG_MODULES is disabled, it doesn't really make sense to build
the linux-headers package.
Fixes: 269a535ca9 ("modpost: generate vmlinux.symvers and reuse it for the second modpost")
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add "abitrary||arbitrary".
Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/6bf6520d-787d-5749-09b5-ff92185f501f@lineo.co.jp
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=NNLw
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A decent number of SELinux patches for v5.10, twenty two in total. The
highlights are listed below, but all of the patches pass our test
suite and merge cleanly.
- A number of changes to how the SELinux policy is loaded and managed
inside the kernel with the goal of improving the atomicity of a
SELinux policy load operation.
These changes account for the bulk of the diffstat as well as the
patch count. A special thanks to everyone who contributed patches
and fixes for this work.
- Convert the SELinux policy read-write lock to RCU.
- A tracepoint was added for audited SELinux access control events;
this should help provide a more unified backtrace across kernel and
userspace.
- Allow the removal of security.selinux xattrs when a SELinux policy
is not loaded.
- Enable policy capabilities in SELinux policies created with the
scripts/selinux/mdp tool.
- Provide some "no sooner than" dates for the SELinux checkreqprot
sysfs deprecation"
* tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (22 commits)
selinux: provide a "no sooner than" date for the checkreqprot removal
selinux: Add helper functions to get and set checkreqprot
selinux: access policycaps with READ_ONCE/WRITE_ONCE
selinux: simplify away security_policydb_len()
selinux: move policy mutex to selinux_state, use in lockdep checks
selinux: fix error handling bugs in security_load_policy()
selinux: convert policy read-write lock to RCU
selinux: delete repeated words in comments
selinux: add basic filtering for audit trace events
selinux: add tracepoint on audited events
selinux: Create new booleans and class dirs out of tree
selinux: Standardize string literal usage for selinuxfs directory names
selinux: Refactor selinuxfs directory populating functions
selinux: Create function for selinuxfs directory cleanup
selinux: permit removing security.selinux xattr before policy load
selinux: fix memdup.cocci warnings
selinux: avoid dereferencing the policy prior to initialization
selinux: fix allocation failure check on newpolicy->sidtab
selinux: refactor changing booleans
selinux: move policy commit after updating selinuxfs
...
-----BEGIN PGP SIGNATURE-----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=9vEl
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"The big new thing is the fully lockless ringbuffer implementation,
including the support for continuous lines. It will allow to store and
read messages in any situation wihtout the risk of deadlocks and
without the need of temporary per-CPU buffers.
The access is still serialized by logbuf_lock. It synchronizes few
more operations, for example, temporary buffer for formatting the
message, syslog and kmsg_dump operations. The lock removal is being
discussed and should be ready for the next release.
The continuous lines are handled exactly the same way as before to
avoid regressions in user space. It means that they are appended to
the last message when the caller is the same. Only the last message
can be extended.
The data ring includes plain text of the messages. Except for an
integer at the beginning of each message that points back to the
descriptor ring with other metadata.
The dictionary has to stay. journalctl uses it to filter the log. It
allows to show messages related to a given device. The dictionary
values are stored in the descriptor ring with the other metadata.
This is the first part of the printk rework as discussed at Plumbers
2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The
next big step will be handling consoles by kthreads during the normal
system operation. It will require special handling of situations when
the kthreads could not get scheduled, for example, early boot,
suspend, panic.
Other changes:
- Add John Ogness as a reviewer for printk subsystem. He is author of
the rework and is familiar with the code and history.
- Fix locking in serial8250_do_startup() to prevent lockdep report.
- Few code cleanups"
* tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits)
printk: Use fallthrough pseudo-keyword
printk: reduce setup_text_buf size to LOG_LINE_MAX
printk: avoid and/or handle record truncation
printk: remove dict ring
printk: move dictionary keys to dev_printk_info
printk: move printk_info into separate array
printk: reimplement log_cont using record extension
printk: ringbuffer: add finalization/extension support
printk: ringbuffer: change representation of states
printk: ringbuffer: clear initial reserved fields
printk: ringbuffer: add BLK_DATALESS() macro
printk: ringbuffer: relocate get_data()
printk: ringbuffer: avoid memcpy() on state_var
printk: ringbuffer: fix setting state in desc_read()
kernel.h: Move oops_in_progress to printk.h
scripts/gdb: update for lockless printk ringbuffer
scripts/gdb: add utils.read_ulong()
docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo
printk: reduce LOG_BUF_SHIFT range for H8300
printk: ringbuffer: support dataless records
...
no conflicts at all. This pull includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+ErNYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y284H/3bv9fahbg16AJcKYqJXFHGpDs3CsASPnJqQ
9HQoV5tg6Qd4kI3oFb+30l8SK73Wr2t685/DhOPDRR/vN3B5M1vOQvPRL/dEqiwi
aUEhtMbnC/trSbteXsjGDWT+1EnI/+R3NFV++WiRp1XxE4DRXL3xySTeviR0IW+V
rQxU7VCcVp0bklVH+gqjrsvqU5iZeckyZB6evc8X92ThhzjNprR5KVxxgl1wxcu/
dPYizHoKYVoLVNw50rwPGt2hmq9RpyDM6Xh9UhLHcA57ENyzr8NNTJBOT0tVMTWV
smU01X/ECoy54kj1w8AKP+f7F0G7DUU+Jz68X0X/kYPq520dUs4=
=Ovox
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
Only x86 provides try_cmpxchg() outside of the atomic_t interfaces,
provide generic fallbacks to create this interface from the widely
available cmpxchg() function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/159870621515.1229682.15506193091065001742.stgit@devnote2
Currently, Coccinelle uses at most one thread per core by default in
machines with more than 2 hyperthreads. However, for systems with only 4
hyperthreads, this does not improve performance.
Modify coccicheck to use all available threads in machines with
upto 4 hyperthreads.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
While fetching the number of threads per core with lscpu,
the [:digit:] set is used for translation of digits from 0-9.
However, using [:digit:] instead of "[:digit:]" does not seem
to work uniformly for some shell types and configurations
(such as zsh).
Therefore, modify coccicheck to use double quotes around the
[:digit:] set for uniformity and better portability.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
namespace.pl is intended to help locate symbols which are defined but
are not used externally. The goal is to avoid bloat of the namespace in
the resulting kernel image.
The script relies on object data, and only finds unused symbols for the
configuration used to generate that object data. This results in a lot
of false positive warnings such as symbols only used by a single
architecture, or symbols which are used externally only under certain
configurations.
Running namespace.pl using allyesconfig, allmodconfig, and
x86_64_defconfig yields the following results:
* allmodconfig
* 11122 unique symbol names with no external reference
* 1194 symbols listed as multiply defined
* 214 symbols it can't resolve
* allyesconfig
* 10997 unique symbol names with no external reference
* 1194 symbols listed as multiply defined
* 214 symbols it can't resolve
* x86_64_defconfig
* 5757 unique symbol names with no external reference
* 528 symbols listed as multiply defined
* 154 symbols it can't resolve
The script also has no way to easily limit the scope of the checks to
a given subset of the kernel, such as only checking for symbols defined
within a module or subsystem.
Discussion on public mailing lists seems to indicate that many view the
tool output as suspect or not very useful (see discussions at [1] and
[2] for further context).
As described by Masahiro Yamada at [2], namespace.pl provides 3 types of
checks: listing multiply defined symbols, resolving external symbols,
and warnings about symbols with no reference.
The first category of issues is easily caught by the linker as any set
of multiply defined symbols should fail to link. The second category of
issues is also caught by linking, as undefined symbols would cause
issues. Even with modules, these types of issues where a module relies
on an external symbol are caught by modpost.
The remaining category of issues reported is the list of symbols with no
external reference, and is the primary motivation of this script.
However, it ought to be clear from the above examples that the output is
difficult to sort through. Even allyesconfig has ~10000 entries.
The current submit-checklist indicates that patches ought to go through
namespacecheck and fix any new issues arising. But that itself presents
problems. As described at [1], many cases of reports are due to
configuration where a function is used externally by some configuration
settings. Prominent maintainers appear to dislike changes modify code
such that symbols become static based on CONFIG_* flags ([3], and [4])
One possible solution is to adjust the advice and indicate that we only
care about the output of namespacecheck on allyesconfig or allmodconfig
builds...
However, given the discussion at [2], I suspect that few people are
actively using this tool. It doesn't have a maintainer in the
MAINTAINERS flie, and it produces so many warnings for unused symbols
that it is difficult to use effectively. Thus, I propose we simply
remove it.
[1] https://lore.kernel.org/netdev/20200708164812.384ae8ea@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
[2] https://lore.kernel.org/lkml/20190129204319.15238-1-jacob.e.keller@intel.com/
[3] https://lore.kernel.org/netdev/20190828.154744.2058157956381129672.davem@davemloft.net/
[4] https://lore.kernel.org/netdev/20190827210928.576c5fef@cakuba.netronome.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Print memset() call position in addition to the kfree() position to
ease issues identification.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
These have been required by the Debian policy for a while, even though
the tooling can detect and workaround their omission, but are a hard
requirement when using rootless builds.
[masahiro:
The following Debian policy is particularly important for rootless builds:
"Both binary-* targets should depend on the build target, or on the
appropriate build-arch or build-indep target, so that the package is
built if it has not been already."
]
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This makes it possible to build the Debian packages without requiring
(pseudo-)root privileges, when the build drivers support this mode
of operation.
See-Also: /usr/share/doc/dpkg/rootless-builds.txt.gz
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We should not be encoding the timestamp, otherwise we end up generating
unreproducible files that cascade into unreproducible packages.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, the build log shows KSYM + object name.
Precisely speaking, kallsyms generates a .S file and then the compiler
compiles it into a .o file. Split the build log into two.
[Before]
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD vmlinux
[After]
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull KCSAN updates for v5.10 from Paul E. McKenney:
- Improve kernel messages.
- Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y.
- Optimize debugfs stat counters.
- Introduce the instrument_*read_write() annotations, to provide a
finer description of certain ops - using KCSAN's compound instrumentation.
Use them for atomic RNW and bitops, where appropriate.
Doing this might find new races.
(Depends on the compiler having tsan-compound-read-before-write=1 support.)
- Support atomic built-ins, which will help certain architectures, such as s390.
- Misc enhancements and smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sha1sum of include/linux/atomic-arch-fallback.h isn't checked by
check-atomics.sh. It's not clear why it's skipped so let's check it too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201001202028.1048418-1-pebolle@tiscali.nl
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
One-element and zero-length arrays are deprecated [1]. Kernel
code should always use "flexible array members" instead, except
for existing uapi definitions.
The script warns about one-element and zero-length arrays in structs.
[1] commit 68e4cd17e2 ("docs: deprecated.rst: Add zero-length and
one-element arrays")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
One of the entries has three fields "mistake||correction||correction"
rather than the expected two fields "mistake||correction". Fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit cc9539e788 ("media: docs: use the new SPDX header for GFDL-1.1 on
*.svg files") adds SPDX-License-Identifiers enclosed in XML comments,
i.e., <!-- ... -->, for svg files.
Unfortunately, ./scripts/spdxcheck.py does not handle
SPDX-License-Identifiers in XML comments, so it simply fails on checking
these files with 'Invalid License ID: --'.
Strip the XML comment ending simply by copying how it was done for comments
in C. With that, ./scripts/spdxcheck.py handles the svg files properly.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
-----BEGIN PGP SIGNATURE-----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=m4lt
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
dt-bindings: Fix 'reg' size issues in zynqmp examples
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
dt-bindings: crypto: sa2ul: fix a DT binding check warning
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes: e3fd9b5384 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
A helper is added to support tracing kernel type information in BPF
using the BPF Type Format (BTF). Its signature is
long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
struct btf_ptr * specifies
- a pointer to the data to be traced
- the BTF id of the type of data pointed to
- a flags field is provided for future use; these flags
are not to be confused with the BTF_F_* flags
below that control how the btf_ptr is displayed; the
flags member of the struct btf_ptr may be used to
disambiguate types in kernel versus module BTF, etc;
the main distinction is the flags relate to the type
and information needed in identifying it; not how it
is displayed.
For example a BPF program with a struct sk_buff *skb
could do the following:
static struct btf_ptr b = { };
b.ptr = skb;
b.type_id = __builtin_btf_type_id(struct sk_buff, 1);
bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0);
Default output looks like this:
(struct sk_buff){
.transport_header = (__u16)65535,
.mac_header = (__u16)65535,
.end = (sk_buff_data_t)192,
.head = (unsigned char *)0x000000007524fd8b,
.data = (unsigned char *)0x000000007524fd8b,
.truesize = (unsigned int)768,
.users = (refcount_t){
.refs = (atomic_t){
.counter = (int)1,
},
},
}
Flags modifying display are as follows:
- BTF_F_COMPACT: no formatting around type information
- BTF_F_NONAME: no struct/union member names/types
- BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
equivalent to %px.
- BTF_F_ZERO: show zero-valued struct/union members;
they are not displayed by default
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-4-git-send-email-alan.maguire@oracle.com
By default, coccicheck utilizes all available threads to implement
parallelisation. However, when all available threads are used,
a decrease in performance is noted. The elapsed time is minimum
when at most one thread per core is used.
For example, on benchmarking the semantic patch kfree.cocci for
usb/serial using hyperfine, the outputs obtained for J=5 and J=2
are 1.32 and 1.90 times faster than those for J=10 and J=9
respectively for two separate runs. For the larger drivers/staging
directory, minimium elapsed time is obtained for J=3 which is 1.86
times faster than that for J=12. The optimal J value does not
exceed 6 in any of the test runs. The benchmarks are run on a machine
with 6 cores, with 2 threads per core, i.e, 12 hyperthreads in all.
To improve performance, modify coccicheck to use at most only
one thread per core by default.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
When building for an embedded target using Yocto, we're sometimes
observing that the version string that gets built into vmlinux (and
thus what uname -a reports) differs from the path under /lib/modules/
where modules get installed in the rootfs, but only in the length of
the -gabc123def suffix. Hence modprobe always fails.
The problem is that Yocto has the concept of "sstate" (shared state),
which allows different developers/buildbots/etc. to share build
artifacts, based on a hash of all the metadata that went into building
that artifact - and that metadata includes all dependencies (e.g. the
compiler used etc.). That normally works quite well; usually a clean
build (without using any sstate cache) done by one developer ends up
being binary identical to a build done on another host. However, one
thing that can cause two developers to end up with different builds
[and thus make one's vmlinux package incompatible with the other's
kernel-dev package], which is not captured by the metadata hashing, is
this `git describe`: The output of that can be affected by
(1) git version: before 2.11 git defaulted to a minimum of 7, since
2.11 (git.git commit e6c587) the default is dynamic based on the
number of objects in the repo
(2) hence even if both run the same git version, the output can differ
based on how many remotes are being tracked (or just lots of local
development branches or plain old garbage)
(3) and of course somebody could have a core.abbrev config setting in
~/.gitconfig
So in order to avoid `uname -a` output relying on such random details
of the build environment which are rather hard to ensure are
consistent between developers and buildbots, make sure the abbreviated
sha1 always consists of exactly 12 hex characters. That is consistent
with the current rule for -stable patches, and is almost always enough
to identify the head commit unambigously - in the few cases where it
does not, the v5.4.3-00021- prefix would certainly nail it down.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
PowerPC allmodconfig often fails to build as follows:
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD .tmp_vmlinux.kallsyms3
KSYM .tmp_vmlinux.kallsyms3.o
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
make[2]: *** [../Makefile:1162: vmlinux] Error 1
Setting KALLSYMS_EXTRA_PASS=1 does not help.
This is caused by the compiler inserting stubs such as *.long_branch.*
and *.plt_branch.*
$ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2
[ snip ]
c00000000210c010 t 00000075.plt_branch.da9:19
c00000000210c020 t 00000075.plt_branch.1677:5
c00000000210c030 t 00000075.long_branch.memmove
c00000000210c034 t 00000075.plt_branch.9e0:5
c00000000210c044 t 00000075.plt_branch.free_initrd_mem
...
Actually, the problem mentioned in scripts/link-vmlinux.sh comments;
"In theory it's possible this results in even more stubs, but unlikely"
is happening here, and ends up with another kallsyms step required.
scripts/kallsyms.c already ignores various compiler stubs. Let's do
similar to make kallsysms for PowerPC always succeed in 2 steps.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
'scripts/kconfig/qconf -h' just calls usage() and exits, with
QApplication unused.
There is no need to construct QApplication so early. Do it after
the parse stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
There are so many ways to toggle bool / tristate options.
I do not know how useful these columns are.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ConfigView::setShowName/Range() only get access to the 'list' member.
Move them to the more relevant ConfigList class.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Previously, when you double-clicked the "int", "hex", or "string" menus,
a line-edit gadget showed up to allow you to input the value, which
looked clumsy.
Also, it was buggy; the editor opened even if the config option was not
editable. For example, just try to double-click CC_VERSION_TEXT, which
has no prompt.
This commit sub-classes QStyleItemDelegate to allow users to edit
"int", "hex", "string" menus in-place. Just double-click (or press
the F2 key) in the data column. Then, an editor widget is placed on
top of the item view.
The two methods are overridden:
createEditor - process only when the data column is being accessed
and the menu is visible. Otherwise, return nullptr to disallow editing.
setModelData - take the new data from the editor, and set it to the
addressed symbol. If it was successful, update all the list windows.
Otherwise, (the reason for the failure is possibly the input data was
out of range), set the old value back to the editor.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The next commit will allow users to edit "int", "hex", "string"
menus in-place from the data column.
The data column should be always displayed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ConfigView::updateList() iterates over all views, and then calls
updateList() against for its ConfigList instance.
This means there is no point to implement it in the ConfigView class.
Move and rename as follows:
ConfigView::updateList() -> ConfigList::updateListForAll()
ConfigView::updateListAll() -> ConfigList::updateListAllForAll()
I used QList to contain all ConfigList instances.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 76538660fb ("Port xconfig to Qt5 - Remove custom
ListView classes.") removed the original implementation, where
ConfigItem::okRename() overrode Q3ListViewItem::okRename().
Commit 59e564408f ("Port xconfig to Qt5 - Put back some of the
old implementation.") restored the empty stub, but it seems
useless.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I do not think "Although there is no cross reference yet ..." is valid
any longer.
The cross reference is supported via hyperlinks enabled by the
"show Debug Info" option.
Update the message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
The introduction message displayed by 'Help -> Introduction' does not
look nice due to excessive new lines.
Reformat the message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Move CFLAGS_KASAN*, CFLAGS_UBSAN, CFLAGS_KCSAN to Makefile.kasan,
Makefile.ubsan, Makefile.kcsan, respectively.
This commit also avoids the same -fsanitize=* flags being added to
CFLAGS_UBSAN multiple times.
Prior to this commit, the ubsan flags were appended by the '+='
operator, without any initialization. Some build targets such as
'make bindeb-pkg' recurses to the top Makefile, and ended up with
adding the same flags to CFLAGS_UBSAN twice.
Clear CFLAGS_UBSAN with ':=' to make it a simply expanded variable.
This is better than a recursively expanded variable, which evaluates
$(call cc-option, ...) multiple times before Kbuild starts descending
to subdirectories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Since commit e0fe0bbe57 ("kbuild: include scripts/Makefile.* only
when relevant CONFIG is enabled"), this file is included only when
CONFIG_KASAN=y.
This ifdef is redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Marco Elver <elver@google.com>
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)
The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.
You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.
scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.
You can add arch-specific sections in <asm/module.lds.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all the resolve_btfids 'users' are under CONFIG_BPF
code, so if we have CONFIG_BPF disabled, resolve_btfids will
fail, because there's no data to resolve.
Disabling resolve_btfids if there's CONFIG_BPF disabled,
so we won't fail such builds.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200923185735.3048198-1-jolsa@kernel.org
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
Check for !A || A && B condition. It's equivalent to !A || B.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Since commit 68fd110b3e ("kconfig: qconf: remove redundant help in
the info view"), the help message is no longer displayed.
I intended to drop duplicated "Symbol:", "Type:", but precious info
about help and reverse dependencies was lost too.
Revive it now.
"defined at" is contained in menu_get_ext_help(), so I made sure
to not display it twice.
Fixes: 68fd110b3e ("kconfig: qconf: remove redundant help in the info view")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
"make HOSTCXX=clang++ xconfig" reports the following:
HOSTCXX scripts/kconfig/qconf.o
In file included from scripts/kconfig/qconf.cc:23:
In file included from scripts/kconfig/lkc.h:15:
scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage]
struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head);
^
Currently, get_relations_str() is declared before the struct gstr
definition.
Move all declarations of menu.c functions below.
BTW, some are declared in lkc.h and some in lkc_proto.h, but the
difference is unclear. I guess some refactoring is needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Boris Kolpackov <boris@codesynthesis.com>
Commit c9b09a9249 ("kconfig: qconf: use delete[] instead of delete
to free array") fixed two lines, but there is one more.
(cppcheck does not report it for some reason...)
This was detected by Clang.
"make HOSTCXX=clang++ xconfig" reports the following:
scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete]
delete data;
^
[]
scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here
char *data = new char[count + 1];
^
Fixes: c4f7398bee ("kconfig: qconf: make debug links work again")
Fixes: c9b09a9249 ("kconfig: qconf: use delete[] instead of delete to free array")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Subroutine dump_struct uses type attributes to check if the struct
syntax is valid. Then, it removes all attributes before using it for
output. `____cacheline_aligned` is an attribute that is
not included in both steps. Add it, since it is used by kernel structs.
Based on previous patch to add ____cacheline_aligned_in_smp.
Motivated by patches to reorder this attribute to before the
variable name. Whilst we could do that in all cases, that would
be a massive change and it is more common in the kernel to place
this particular attribute after the variable name. A quick grep
suggests approximately 400 instances of which 341 have this
attribute just before a semicolon and hence after the variable name.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200910185415.653139-1-jic23@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add support for extending the newest data block. For this, introduce
a new finalization state (desc_finalized) denoting a committed
descriptor that cannot be extended.
Until a record is finalized, a writer can reopen that record to
append new data. Reopening a record means transitioning from the
desc_committed state back to the desc_reserved state.
A writer can explicitly finalize a record if there is no intention
of extending it. Also, records are automatically finalized when a
new record is reserved. This relieves writers of needing to
explicitly finalize while also making such records available to
readers sooner. (Readers can only traverse finalized records.)
Four new memory barrier pairs are introduced. Two of them are
insignificant additions (data_realloc:A/desc_read:D and
data_realloc:A/data_push_tail:B) because they are alternate path
memory barriers that exactly match the purpose, pairing, and
context of the two existing memory barrier pairs they provide an
alternate path for. The other two new memory barrier pairs are
significant additions:
desc_reopen_last:A / _prb_commit:B - When reopening a descriptor,
ensure the state transitions back to desc_reserved before
fully trusting the descriptor data.
_prb_commit:B / desc_reserve:D - When committing a descriptor,
ensure the state transitions to desc_committed before checking
the head ID to see if the descriptor needs to be finalized.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-6-john.ogness@linutronix.de
Rather than deriving the state by evaluating bits within the flags
area of the state variable, assign the states explicit values and
set those values in the flags area. Introduce macros to make it
simple to read and write state values for the state variable.
Although the functionality is preserved, the binary representation
for the states is changed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-5-john.ogness@linutronix.de
Currently, coccicheck fails with only the message "coccicheck failed"
and the error code for the failure. To obtain the error logs,
one needs to specify a debug file using the DEBUG_FILE option.
Modify coccicheck to display error logs when it crashes unless
DEBUG_FILE is set, in which case, the error logs are stored in
the specified debug file.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Here are a number of small driver fixes for 5.9-rc5
Included in here are:
- habanalabs driver fixes
- interconnect driver fixes
- soundwire driver fixes
- dyndbg fixes for reported issues, and then reverts to fix it
all up to a sane state.
- phy driver fixes
Full details of these are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX13aLA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymjJgCfZq1pnSupUtvLTimvaPwSaep/lJQAoIoGR0t/
co5MQO8ZGMBEavVtzE79
=vnmm
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.9-rc5
Included in here are:
- habanalabs driver fixes
- interconnect driver fixes
- soundwire driver fixes
- dyndbg fixes for reported issues, and then reverts to fix it all up
to a sane state.
- phy driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "dyndbg: accept query terms like file=bar and module=foo"
Revert "dyndbg: fix problem parsing format="foo bar""
scripts/tags.sh: exclude tools directory from tags generation
video: fbdev: fix OOB read in vga_8planes_imageblit()
dyndbg: fix problem parsing format="foo bar"
dyndbg: refine export, rename to dynamic_debug_exec_queries()
dyndbg: give %3u width in pr-format, cosmetic only
interconnect: qcom: Fix small BW votes being truncated to zero
soundwire: fix double free of dangling pointer
interconnect: Show bandwidth for disabled paths as zero in debugfs
habanalabs: fix report of RAZWI initiator coordinates
habanalabs: prevent user buff overflow
phy: omap-usb2-phy: disable PHY charger detect
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
soundwire: bus: fix typo in comment on INTSTAT registers
phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
phy: qualcomm: fix platform_no_drv_owner.cocci warnings
With the introduction of the lockless printk ringbuffer, the data
structure for the kernel log buffer was changed. Update the gdb
scripts to be able to parse/print the new log buffer structure.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Petr Mladek <pmladek@suse.com>
[akpm@linux-foundation.org: A typo fix.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814212525.6118-3-john.ogness@linutronix.de
Add a function for reading unsigned long values, which vary in size
depending on the architecture.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814212525.6118-2-john.ogness@linutronix.de
when COMPILED_SOURCE is set, running 'make ARCH=x86_64 COMPILED_SOURCE=1
cscope tags' in KBUILD_OUTPUT directory produces lots of "No such file
or directory" warnings:
...
realpath: sigchain.h: No such file or directory
realpath: orc_gen.c: No such file or directory
realpath: objtool.c: No such file or directory
...
let's exclude tools directory from tags generation
Fixes: 4f491bb6ea ("scripts/tags.sh: collect compiled source precisely")
Link: https://lore.kernel.org/lkml/20200809210056.GA1344537@thinkpad
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Link: https://lore.kernel.org/r/20200810153650.1822316-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge misc fixes from Andrew Morton:
"19 patches.
Subsystems affected by this patch series: MAINTAINERS, ipc, fork,
checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration,
hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
mm: memcg: fix memcg reclaim soft lockup
memcg: fix use-after-free in uncharge_batch
The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized. This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".
I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.
This bug was introduced in the script by commit e518e9a59e
("checkpatch: emit an error when there's a diff in a changelog"). It
has been in the script since then.
The author intended to store the match made by capture group in variable
`$1`. This should have contained the name of the file as `[\w/]+`
matched. However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.
Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.
Fixes: e518e9a59e ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
uninitialized_var() macro was removed from the sources [1] and
other warning-silencing tricks were deprecated [2]. The purpose of this
cocci script is to prevent new occurrences of uninitialized_var()
open-coded variants.
[1] commit 63a0895d96 ("compiler: Remove uninitialized_var() macro")
[2] commit 4b19bec97c ("docs: deprecated.rst: Add uninitialized_var()")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This script can be useful for:
- Figuring out the list of modules you need to pack in initrd
- Figuring out the list of drivers you need to modularize for a device
to be fully functional without building in any dependencies.
- Figuring out which drivers to enable first, when porting drivers
between kernels (say, to upstream).
- Plotting graphs of system dependencies, etc.
Usage: dev-needs.sh [-c|-d|-m|-f] [filter options] <list of devices>
This script needs to be run on the target device once it has booted to a
shell.
The script takes as input a list of one or more device directories under
/sys/devices and then lists the probe dependency chain (suppliers and
parents) of these devices. It does a breadth first search of the dependency
chain, so the last entry in the output is close to the root of the
dependency chain.
By default it lists the full path to the devices under /sys/devices.
It also takes an optional modifier flag as the first parameter to change
what information is listed in the output. If the requested information is
not available, the device name is printed.
-c lists the compatible string of the dependencies
-d lists the driver name of the dependencies that have probed
-m lists the module name of the dependencies that have a module
-f list the firmware node path of the dependencies
-g list the dependencies as edges and nodes for graphviz
-t list the dependencies as edges for tsort
The filter options provide a way to filter out some dependencies:
--allow-no-driver By default dependencies that don't have a driver
attached are ignored. This is to avoid following
device links to "class" devices that are created
when the consumer probes (as in, not a probe
dependency). If you want to follow these links
anyway, use this flag.
--exclude-devlinks Don't follow device links when tracking probe
dependencies.
--exclude-parents Don't follow parent devices when tracking probe
dependencies.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200901224842.1787825-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Semi-automatic removing of localization macros changed the line
from "prompt = _(prompt);" to "prompt = prompt;". Drop the
reduntand assignment.
Fixes: 694c49a7c0 ("kconfig: drop localization support")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A user reported:
'Use of uninitialized value $ENV{"LMC_KEEP"} in split at
./scripts/kconfig/streamline_config.pl line 596.'
so first check that $ENV{LMC_KEEP} is defined before trying
to use it.
Fixes: c027b02d89 ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Extend the list of free functions with kvfree(), kvfree_sensitive(),
vfree().
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-09-01
The following pull-request contains BPF updates for your *net-next* tree.
There are two small conflicts when pulling, resolve as follows:
1) Merge conflict in tools/lib/bpf/libbpf.c between 88a8212028 ("libbpf: Factor
out common ELF operations and improve logging") in bpf-next and 1e891e513e
("libbpf: Fix map index used in error message") in net-next. Resolve by taking
the hunk in bpf-next:
[...]
scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
data = elf_sec_data(obj, scn);
if (!scn || !data) {
pr_warn("elf: failed to get %s map definitions for %s\n",
MAPS_ELF_SEC, obj->path);
return -EINVAL;
}
[...]
2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
9647c57b11 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
better performance") in bpf-next and e20f0dbf20 ("net/mlx5e: RX, Add a prefetch
command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:
[...]
xdp_set_data_meta_invalid(xdp);
xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
net_prefetch(xdp->data);
[...]
We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).
The main changes are:
1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
for tracing to reliably access user memory, from Alexei Starovoitov.
2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.
3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.
4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.
5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.
6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.
7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.
8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.
9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.
10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.
11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.
12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.
13) Various smaller cleanups and improvements all over the place.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Found when Colin King fixed a typo for falied/failed
and a git grep showed 2 entries in this file.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds clang-tidy and the clang static-analyzer as make
targets. The goal of this patch is to make static analysis tools
usable and extendable by any developer or researcher who is familiar
with basic c++.
The current static analysis tools require intimate knowledge of the
internal workings of the static analysis. Clang-tidy and the clang
static analyzers expose an easy to use api and allow users unfamiliar
with clang to write new checks with relative ease.
===Clang-tidy===
Clang-tidy is an easily extendable 'linter' that runs on the AST.
Clang-tidy checks are easy to write and understand. A check consists of
two parts, a matcher and a checker. The matcher is created using a
domain specific language that acts on the AST
(https://clang.llvm.org/docs/LibASTMatchersReference.html). When AST
nodes are found by the matcher a callback is made to the checker. The
checker can then execute additional checks and issue warnings.
Here is an example clang-tidy check to report functions that have calls
to local_irq_disable without calls to local_irq_enable and vice-versa.
Functions flagged with __attribute((annotation("ignore_irq_balancing")))
are ignored for analysis. (https://reviews.llvm.org/D65828)
===Clang static analyzer===
The clang static analyzer is a more powerful static analysis tool that
uses symbolic execution to find bugs. Currently there is a check that
looks for potential security bugs from invalid uses of kmalloc and
kfree. There are several more general purpose checks that are useful for
the kernel.
The clang static analyzer is well documented and designed to be
extensible.
(https://clang-analyzer.llvm.org/checker_dev_manual.html)
(https://github.com/haoNoQ/clang-analyzer-guide/releases/download/v0.1/clang-analyzer-guide-v0.1.pdf)
The main draw of the clang tools is how accessible they are. The clang
documentation is very nice and these tools are built specifically to be
easily extendable by any developer. They provide an accessible method of
bug-finding and research to people who are not overly familiar with the
kernel codebase.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This warning was useful when users previously needed to manually
build the kernel and run this script.
Now you can simply do 'make compile_commands.json', which updates
all the necessary build artifacts and automatically creates the
compilation database. There is no more worry for a mistake like
"Oh, I forgot to build the kernel".
Now, this warning is rather annoying.
You can create compile_commands.json for an external module:
$ make M=/path/to/your/external/module compile_commands.json
Then, this warning is displayed since there are usually less than
300 files in a single module.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This script currently searches the specified directory for .cmd files.
One drawback is it may contain stale .cmd files after you rebuild the
kernel several times without 'make clean'.
This commit supports *.o, *.a, and modules.order as positional
parameters. If such files are given, they are parsed to collect
associated .cmd files. I added a generator helper for each of them.
This feature is useful to get the list of active .cmd files from the
last build, and will be used by the next commit to wire up the
compile_commands.json rule to the Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, this script walks under the specified directory (default to
the current directory), then parses all .cmd files found.
Split it into a separate helper function because the next commit will
add more helpers to pick up .cmd files associated with given file(s).
There is no point to build and return a huge list at once. I used a
generator so it works in the for-loop with less memory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Change the -o option independent of the -d option, which is I think
clearer behavior. Some people may like to use -d to specify a separate
output directory, but still output the compile_commands.py in the
source directory (unless the source tree is read-only) because it is
the default location Clang Tools search for the compilation database.
Also, move the default parameter to the default= argument of the
.add_argument().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
I think the help message of the -d option is somewhat misleading.
Path to the kernel source directory to search (defaults to the working directory)
The part "kernel source directory" is the source of the confusion.
Some people misunderstand as if this script did not support separate
output directories.
Actually, this script also works for out-of-tree builds. You can
use the -d option to point to the object output directory, not to
the source directory. It should match to the O= option used in the
previous kernel build, and then appears in the "directory" field of
compile_commands.json.
Reword the help message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The tools/ directory uses a different build system, and the format of
.cmd files is different because the tools builds run in a different
work directory.
Supporting two formats compilicates the script.
The only loss by this change is objtool.
Also, rename the confusing variable 'relative_path' because it is
not necessarily a relative path. When the output directory is not
the direct child of the source tree (e.g. O=foo/bar), it is an
absolute path. Rename it to 'file_path'.
os.path.join(root_directory, file_path) works whether the file_path
is relative or not. If file_path is already absolute, it returns it
as-is.
I used os.path.abspath() to normalize file paths. If you run this
script against the kernel built with O=foo option, the file_path
contains '../' patterns. os.path.abspath() fixes up 'foo/bar/../baz'
into 'foo/baz', and produces a cleaner commands_database.json.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use 'choices' to check if the given parameter is valid.
I also simplified the help message because, with 'choices', --help
shows the list of valid parameters:
--log_level {DEBUG,INFO,WARNING,ERROR,CRITICAL}
I started the help message with a lower case, "the level of log ..."
in order to be consistent with the -h option:
-h, --help show this help message and exit
The message "show this help ..." comes from the ArgumentParser library
code, and I do not know how to change it. So, I changed our code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
After the allmodconfig build, this script takes about 5 sec on my
machine. Most of the run-time is consumed for needless regex matching.
We know the format of .*.cmd file; the first line is the build command.
There is no need to parse the rest.
With this optimization, now it runs 4 times faster.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Some targets (localyesconfig, localmodconfig, defconfig) hide the
command running, but the others do not.
Users know which Kconfig flavor they are running, so it is OK to hide
the command. Add $(Q) to all commands consistently. If you want to see
the full command running, pass V=1 from the command line.
syncconfig is the exceptional case, which occurs without explicit
command invocation by the user. Display the Kbuild-style log for it.
The ugly bare log will go away.
[Before]
scripts/kconfig/conf --syncconfig Kconfig
[After]
SYNC include/config/auto.conf
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Adding d_path helper function that returns full path for
given 'struct path' object, which needs to be the kernel
BTF 'path' object. The path is returned in buffer provided
'buf' of size 'sz' and is zero terminated.
bpf_d_path(&file->f_path, buf, size);
The helper calls directly d_path function, so there's only
limited set of function it can be called from. Adding just
very modest set for the start.
Updating also bpf.h tools uapi header and adding 'path' to
bpf_helpers_doc.py script.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-11-jolsa@kernel.org
Use instrument_atomic_read_write() for atomic RMW ops.
Cc: Will Deacon <will@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Mauro Carvalho Chehab