[Why & How]
It's useful to disable MPO when debugging or testing. Therefore, add a
dcdebugmask option to disable MPO.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Being able to configure visual confirm at boot or in cmdline is helpful
when debugging.
[How]
Add a module parameter to configure DC visual confirm, which works the
same way as the equivalent debugfs entry.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_helper_populate_phantom_dlg_params uses FPU
operations. For this reason, this commit moves this function to the
dcn32_fpu file, and we ensure that we only invoke it under the
kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are working to isolate FPU operations inside the DML folder, and the
file dcn32_clk_mgr has some of these operations. This commit moves the
FPU operations inside the clock manager and creates the dcn32_fpu file
to aggregate those operations. Note that there is no functional change
ere, just moving code from one part to another.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e7ef5569e71bf3fec01ea513c27c6081c0dbbc64.
Idle optimization was disabled due to SMU and firmware bugs. Enable it
back for DCN32. DCN321 has them enabled already
Fixes: 6a640b95b0 ("drm/amd/display: disable idle optimizations")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Unbounded request logic in resource/DML has some issues where unbounded
request is being enabled incorrectly. SW today enables unbounded request
unconditionally in hardware, on the assumption that HW can always
support it in single pipe scenarios.
This worked until now because the same assumption is made in DML. A new
DML update is needed to fix a bug, where there are single pipe scenarios
where unbounded cannot be enabled, and this change in DML needs to be
ported in, and dcn32 resource logic fixed.
[how]
First, dcn32_resource should program unbounded req in HW according to
unbounded req enablement output from DML, as opposed to DML input.
Second, port in DML update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor size can update without MALL cache update.
Update the register on cursor attribute as well.
[How]
Update cursor MALL cache on cursor attribute update.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double `to' is duplicated in the comment, remove one.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double `have' is duplicated in line 696, remove one.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding dm ip block to enable display on dcn 3.1.4.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN 3.1.4 uses dmub not dmcu. Attempt to identify
dmcu firmware for dcn314 results in dm init error:
"Unsupported ASIC type"
[How]
Add dcn314 to the list of asics that don't require dmcu
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There are cases where the pipes populated are not all at the top
of the pipes list under context. Loop through all pipes for DET
allocation instead of just the number of populated ones, even if
some unpopulated pipes are iterated through unnecessarily.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VM enabled in IP configuration causes UCLK not
reaching DPM0. The expectation for VM enable should
be that KMD will indicate to DAL when VM is enabled,
then DAL will set the bit accordingly
[How]
Set gpuvm_enable to zero in DCN3_20 and DCN3_21 resource.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a GFXOFF section at "GPU Power Controls" file, explaining what it is
and how userspace can interact with it.
v2: minor tweaks to the documenation (Alex)
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFXOFF has two different "state" values: one to define if the GPU is
allowed/disallowed to enter GFXOFF, usually called state; and another
one to define if currently GFXOFF is being used, usually called status.
Even when GFXOFF is allowed, GPU firmware can decide to not used it
accordingly to the GPU load.
Userspace can allow/disallow GPUs to enter into GFXOFF via debugfs. The
kernel maintains a counter of requests for GFXOFF (gfx_off_req_count)
that should be decreased to allow GFXOFF and increased to disallow.
The issue with this interface is that userspace can't be sure if GFXOFF
is currently allowed. Even by checking amdgpu_gfxoff file, one might get
an ambiguous 2, that means that GPU is currently out of GFXOFF, but that
can be either because it's currently disallowed or because it's allowed
but given the current GPU load it's enabled. Then, userspace needs to
rely on the fact that GFXOFF is enabled by default on boot and to track
this information.
To make userspace life easier and GFXOFF more reliable, return the
current state of GFXOFF to userspace when reading amdgpu_gfxoff with the
same semantics of writing: 0 means not allowed, not 0 means allowed.
Expose the current status of GFXOFF through a new file,
amdgpu_gfxoff_status.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although dcn31_update_soc_for_wm_a() is only called in dml/dcn31/dcn31_fpu by
dc->res_pool->funcs->update_soc_for_wm_a(dc, context), it's declared in
dcn31_resource that is not FPU protected. Move this function to dcn31_fpu
file as part of the work to isolate FPU code.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variable MaxUsedBW from the function
DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation.
As a side-effect, the variables MaxPerPlaneVActiveWRBandwidth and
WRBandwidth are also removed.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3043:10:
warning: variable 'MaxUsedBW' set but not used [-Wunused-but-set-variable]
double MaxUsedBW = 0;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable regval from the function enc1_update_generic_info_packet
and the variables dynamic_range_rgb and dynamic_range_ycbcr from the
function enc1_stream_encoder_dp_set_stream_attribute are not currently
used.
This was pointed by clang with the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:62:11:
warning: variable 'regval' set but not used [-Wunused-but-set-variable]
uint32_t regval;
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:262:10:
warning: variable 'dynamic_range_rgb' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_rgb = 0; /*full range*/
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:263:10:
warning: variable 'dynamic_range_ycbcr' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_ycbcr = 1; /*bt709*/
^
3 warnings generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variables dispclk_delay_subtotal and dppclk_delay_subtotal from
the function dml_rq_dlg_get_dlg_params.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:920:15:
warning: variable 'dispclk_delay_subtotal' set but not used [-Wunused-but-set-variable]
unsigned int dispclk_delay_subtotal;
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:919:15:
warning: variable 'dppclk_delay_subtotal' set but not used [-Wunused-but-set-variable]
unsigned int dppclk_delay_subtotal;
^
2 warnings generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the unused unsigned int NumberOfStates from the file, which was
declared but never hooked up.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:33:27:
warning: unused variable 'NumberOfStates' [-Wunused-const-variable]
static const unsigned int NumberOfStates = DC__VOLTAGE_STATES;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dml32_CalculatedoublePipeDPPCLKAndSCLThroughput function, which is not used in
the codebase.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:6:
warning: no previous prototype for function
'dml32_CalculatedoublePipeDPPCLKAndSCLThroughput' [-Wmissing-prototypes]
void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput(
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:1:
note: declare 'static' if the function is not intended to be used outside of
this translation unit
void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput(
^
static
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variable clk_src from the function dcn3_get_pix_clk_dividers.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1279:25: warning:
variable 'clk_src' set but not used [-Wunused-but-set-variable]
struct dce110_clk_src *clk_src;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain MPO configurations, DML will split a pipe after DET buffer has
already been allocated by driver, resulting in allocation of more DET
segments than the configurable return buffer has, causing underflow.
[How]
Determine during DET override calculation whether or not a pipe will be
split later on by DML, and distribute DET segments based on expected
number of pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In general cases we want to keep the dram clock change requirement (we
prefer configs that support MCLK switch). Only override to false for
SubVP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to calculate the DTB clock values when DSC is enabled; however,
this is not the current behavior implemented in DCN32. Right now, DML is
trying to calculate DSC values even if DSC is disabled; as a result, we
can have a hard hang due to wrong clock calculation. This commit fixes
this issue by moving the calculation after the DSC check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Number of DSC slices is an input to DML with high dependency
on display specific capability. This isn't something DML can decide
on its own. DML has to use the original number of DSC slices input
to DML during validation without modification. Otherwise the
computed DSC delay will not reflect the current configuration
and therefore causes validation failures.
[how]
Remove DML override for number of DSC slices parameter.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The amdgpu_dm file contains most of the code that works as an interface
between DRM API and DC. As a result, this file becomes very large since
it comprises multiple abstractions such as CRTC manipulation.
[How]
This commit extracts the CRTC code to its specific file named
amdgpu_dm_crtc. This change does not change anything inside the
functions; the only exception is converting some static functions to a
global function.
v2: fix ifdef merge mix up (Alex)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The amdgpu_dm file contains most of the code that works as an interface
between DRM API and DC. As a result, this file becomes very large since
it comprises multiple abstractions such as plane manipulation.
[How]
This commit extracts the plane code to its specific file named
amdgpu_dm_plane. This change does not change anything inside the
functions; the only exception is converting some static functions to a
global function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In order to leverage igt tool to maintain mst feature, expose new
debugfs entry "mst_progress_status".
In our dm flow, record down the result of each phase of mst and user
can examine the mst result by checking whether each phase get completed
successfully.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add "is_mst_connector" debugfs entry to help distinguish whether
a connector is in a mst topology or not.
Access it with the following command:
cat /sys/kernel/debug/dri/0/DP-X/is_mst_connector
Result:
- "root" stands for the root connector of the topology
- "branch" stands for branch device of the topology
- "end" stands for leaf node connector of the topology
- "no" stands for the connector is not a device of a mst topology
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Correct few problems below to have debugfs trigger_hotplug entry
supports mst case
* Adjust the place for acquiring the hpd_lock. We'll also access
dc_link when simulate unplug
* When detect the connector is a mst root, call
reset_cur_dp_mst_topology() to simulate unplug
* Don't support hotplug caused by CSN message since we can't change
mst topology info directly. We can't simulate that
* Clean up redundant code
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Need to leverage this function out of dc_link.c. Change it to public.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update DML to configure drr_display in vba struct.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove an unused variable "remove_disconnect_edp" which was a workaround
bit.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When CONFIG_DRM_AMD_SECURE_DISPLAY is enabled, it will try
to register vertical interrupt 0 for specific task.
Currently, only dcn10 have defined relevant info for vertical interrupt
0. If we enable CONFIG_DRM_AMD_SECURE_DISPLAY for other dcn ASIC, will
get DC_IRQ_SOURCE_INVALID while calling dc_interrupt_to_irq_source() and
cause pointer errors.
[How]
Add support of vertical interrupt 0 for all dcn ASIC.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable gfx ulv and gpo on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Turn previously global function into a static function as it is not used
outside the file.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On the dce_v6_0 and dce_v8_0 hpd tear down callback, the tmp variable
should be written into the control register instead of 0.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scratch register should be accessed through MMIO instead of RLCG
in SRIOV, since it being used in RLCG register access function.
Fixes: d54762cc3e ("drm/amdgpu: nuke dynamic gfx scratch reg allocation")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TTM used to track the "acc_size" of all BOs internally. We needed to
keep track of it in our memory reservation to avoid TTM running out
of memory in its own accounting. However, that "acc_size" accounting
has since been removed from TTM. Therefore we don't really need to
track it any more.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Protect the struct amdgpu_bo_list with a mutex. This is used during command
submission in order to avoid buffer object corruption as recorded in
the link below.
v2 (chk): Keep the mutex looked for the whole CS to avoid using the
list from multiple CS threads at the same time.
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Vitaly Prosyak <Vitaly.Prosyak@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2048
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From VCN4, AMDGPU_HW_IP_VCN_ENC is re-used to support
both encoding and decoding jobs.
Link: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/245/commits
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable mode1 reset for smu_v13_0_7 since it's missing.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To match with the enum defined in trusted os
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's redundant, as now switching to rpm_mode to indicate
runtime power management mode.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This quirk is not needed any more as it's fixed by bypassing
SMU FW reloading in runtime resume.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU is always alive, so it's fine to skip SMU FW reloading
when runpm resumed from BACO, this can avoid some race issues
when resuming SMU.
Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YiPeng Chai