Test that packets hitting a blackhole nexthop are trapped to the CPU
when the trap is enabled. Test that packets are not reported when the
trap is disabled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that IPv4 and IPv6 ping fail when the route is using a blackhole
nexthop or a group with a blackhole nexthop. Test that ping passes when
the route starts using a valid nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test the mlxsw allows blackhole nexthops to be installed and that the
nexthops are marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting GS to 1, 2, or 3 causes a nonsensical part of the IRET microcode
to change GS back to zero on a return from kernel mode to user mode. The
result is that these tests fail randomly depending on when interrupts
happen. Detect when this happens and let the test pass.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/7567fd44a1d60a9424f25b19a998f12149993b0d.1604346596.git.luto@kernel.org
- if wakeups occur in s2idle: "freeze time: N (-x ms waking y times) ms"
- change FREEZELOOP and FREEZEWAKE to S2LOOP and S2WAKE for brevity
- returns all sysfs vals to their initial state after testing
- use the dmesg log for debugging until the test is completed,
instrument the executeSuspend process to have a full trace,
if test completes, formal dmesg log overwrites the debug log
- fix CPU_ON and CPU_OFF devices in the timeline, should include [n]
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
- Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël Salaün)
-----BEGIN PGP SIGNATURE-----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=1Mse
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This gets the seccomp selftests running again on powerpc and sh, and
fixes an audit reporting oversight noticed in both seccomp and ptrace.
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
- Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël
Salaün)"
* tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: sh: Fix register names
selftests/seccomp: powerpc: Fix typo in macro variable name
seccomp: Set PF_SUPERPRIV when checking capability
ptrace: Set PF_SUPERPRIV when checking capability
This patch added IPv6 support for do_transfer, and the test cases for
ADD_ADDR IPv6.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case where a link fails with multiple subflows.
The expectation is that MPTCP will transmit any data that
could not be delivered via the failed link on another subflow.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a nexthop objects version of gre_multipath.sh. Unlike the original
test, it also tests IPv6 overlay which is not possible with the legacy
nexthop implementation. See commit 9a2ad36238 ("selftests: forwarding:
gre_multipath: Drop IPv6 tests") for more info.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to router_multipath.sh and its nexthop objects
version router_mpath_nh.sh, create a nexthop objects version of
router.sh.
It reuses the same topology, but uses device-only nexthop objects
instead of legacy ones.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to IPv4 multipath tests with IPv4 nexthops, also test IPv4
multipath with nexthops that use IPv6 link-local addresses.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
routing_nh_obj() is used to configure the nexthop objects employed by
the test, but it is called twice resulting in "RTNETLINK answers: File
exists" messages.
Remove the first call, so that the function is only called after
setup_wait(), when all the interfaces are up and ready.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that unsupported nexthop objects are rejected and that offload
indication is correctly set on: nexthop objects, nexthop group objects
and routes associated these objects.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add scripts to test ring and coalesce settings
of netdevsim.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out by Michal Kubecek, getting the name
with the previous approach was racy, it's better
and easier to get the name of the device with this
patch's approach.
Essentialy the function doesn't need to exist
anymore as it's a simple 'ls' command.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out some useful functions so that they can be reused
by other ethtool-netdevsim scripts.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It looks like the seccomp selftests was never actually built for sh.
This fixes it, though I don't have an environment to do a runtime test
of it yet.
Fixes: 0bb605c2c7 ("sh: Add SECCOMP_FILTER")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/a36d7b48-6598-1642-e403-0c77a86f416d@physik.fu-berlin.de
Signed-off-by: Kees Cook <keescook@chromium.org>
A typo sneaked into the powerpc selftest. Fix the name so it builds again.
Fixes: 46138329fa ("selftests/seccomp: powerpc: Fix seccomp return value testing")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/87y2ix2895.fsf@mpe.ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit 47c09d6a9f67("bpftool: Introduce "prog profile" command")
introduced "bpftool prog profile" command which can be used
to profile bpf program with metrics like # of instructions,
This patch added support for itlb_misses and dtlb_misses.
During an internal bpf program performance evaluation,
I found these two metrics are also very useful. The following
is an example output:
$ bpftool prog profile id 324 duration 3 cycles itlb_misses
1885029 run_cnt
5134686073 cycles
306893 itlb_misses
$ bpftool prog profile id 324 duration 3 cycles dtlb_misses
1827382 run_cnt
4943593648 cycles
5975636 dtlb_misses
$ bpftool prog profile id 324 duration 3 cycles llc_misses
1836527 run_cnt
5019612972 cycles
4161041 llc_misses
From the above, we can see quite some dtlb misses, 3 dtlb misses
perf prog run. This might be something worth further investigation.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201119073039.4060095-1-yhs@fb.com
can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid crash
- lan743x: prevent interrupt storm on open
- lan743x: fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths,
mostly detected by the Hulk Robot
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SRwI
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
A collection of error case bug fixes
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing
-----BEGIN PGP SIGNATURE-----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=oIS7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"The last two weeks have been quiet here, just the usual smattering of
long standing bug fixes.
A collection of error case bug fixes:
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
tools/testing/scatterlist: Fix test to compile and run
IB/hfi1: Fix error return code in hfi1_init_dd()
RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
RDMA/cm: Make the local_id_table xarray non-irq
Alexei Starovoitov says:
====================
1) libbpf should not attempt to load unused subprogs, from Andrii.
2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel.
3) Relax return code check for subprograms in the BPF verifier, from Dmitrii.
4) Fix several sockmap issues, from John.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
libbpf: Fix VERSIONED_SYM_COUNT number parsing
bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list
bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self
bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self
bpf, sockmap: Use truesize with sk_rmem_schedule()
bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect
bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made
selftests/bpf: Fix error return code in run_getsockopt_test()
bpf: Relax return code check for subprograms
tools, bpftool: Add missing close before bpftool net attach exit
MAINTAINERS/bpf: Update Andrii's entry.
selftests/bpf: Fix unused attribute usage in subprogs_unused test
bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare
libbpf: Don't attempt to load unused subprog as an entry-point BPF program
====================
Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, bpf_probe_read_user_str() could potentially overcopy the
trailing bytes after the NUL due to how do_strncpy_from_user() does the
copy in long-sized strides. The issue has been fixed in the previous
commit.
This commit adds a selftest that ensures we don't regress
bpf_probe_read_user_str() again.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and after the
kernel performs any user accesses (patch 3). It also adds a self-test and
performs some related cleanups.
-----BEGIN PGP SIGNATURE-----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=Yibq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for CVE-2020-4788.
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1
cache before it has been completely validated, via a way-prediction
mechanism. It is not possible for an attacker to determine the
contents of impermissible memory using this method, since these
systems implement a combination of hardware and software security
measures to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker
induces the operating system to speculatively execute instructions
using data that the attacker controls. This can be used for example to
speculatively bypass "kernel user access prevention" techniques, as
discovered by Anthony Steinhauser of Google's Safeside Project. This
is not an attack by itself, but there is a possibility it could be
used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and
after the kernel performs any user accesses (patch 3). It also adds a
self-test and performs some related cleanups"
* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
selftests/powerpc: refactor entry and rfi_flush tests
selftests/powerpc: entry flush test
powerpc: Only include kup-radix.h for 64-bit Book3S
powerpc/64s: flush L1D after user accesses
powerpc/64s: flush L1D on kernel entry
selftests/powerpc: rfi_flush: disable entry flush if present
We remove "other info" from "readelf -s --wide" output when
parsing GLOBAL_SYM_COUNT variable, which was added in [1].
But we don't do that for VERSIONED_SYM_COUNT and it's failing
the check_abi target on powerpc Fedora 33.
The extra "other info" wasn't problem for VERSIONED_SYM_COUNT
parsing until commit [2] added awk in the pipe, which assumes
that the last column is symbol, but it can be "other info".
Adding "other info" removal for VERSIONED_SYM_COUNT the same
way as we did for GLOBAL_SYM_COUNT parsing.
[1] aa915931ac ("libbpf: Fix readelf output parsing for Fedora")
[2] 746f534a48 ("tools/libbpf: Avoid counting local symbols in ABI check")
Fixes: 746f534a48 ("tools/libbpf: Avoid counting local symbols in ABI check")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201118211350.1493421-1-jolsa@kernel.org
Align the bootconfig applied initrd image size to 4. To fill the gap,
the bootconfig command uses null characters in between the bootconfig
data and the footer. This will expands the footer size but don't change
the checksum.
Thus the block image of the initrd file with bootconfig is as follows.
[initrd][bootconfig][(pad)][size][csum]["#BOOTCONFIG\n"]
Link: https://lkml.kernel.org/r/160576522046.320071.8550680670010950634.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix to check the write(2) failure including partial write
correctly and try to rollback the partial write, because
if there is no BOOTCONFIG_MAGIC string, we can not remove it.
Link: https://lkml.kernel.org/r/160576521135.320071.3883101436675969998.stgit@devnote2
Fixes: 85c46b78da ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix not to refer the errno variable as the result of previous libc
functions after printf() because printf() can change the errno.
Link: https://lkml.kernel.org/r/160576520243.320071.51093664672431249.stgit@devnote2
Fixes: 85c46b78da ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.
For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.
If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.
Reported-by: Spoorthy S <spoorts2@in.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A lot of tests require unaligned memory access to work. Mark the tests
as such, so that they can be avoided on unsupported architectures such
as RISC-V.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-4-bjorn.topel@gmail.com
Some architectures have strict alignment requirements. In that case,
the BPF verifier detects if a program has unaligned accesses and
rejects them. A user can pass BPF_F_ANY_ALIGNMENT to a program to
override this check. That, however, will only work when a privileged
user loads a program. An unprivileged user loading a program with this
flag will be rejected prior entering the verifier.
Hence, it does not make sense to load unprivileged programs without
strict alignment when testing the verifier. This patch avoids exactly
that.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-3-bjorn.topel@gmail.com
The selftests/bpf Makefile includes system include directories from
the host, when building BPF programs. On RISC-V glibc requires that
__riscv_xlen is defined. This is not the case for "clang -target bpf",
which messes up __WORDSIZE (errno.h -> ... -> wordsize.h) and breaks
the build.
By explicitly defining __risc_xlen correctly for riscv, we can
workaround this.
Fixes: 167381f3ea ("selftests/bpf: Makefile fix "missing" headers on build with -idirafter")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-2-bjorn.topel@gmail.com
The helper uses CLOCK_MONOTONIC_COARSE source of time that is less
accurate but more performant.
We have a BPF CGROUP_SKB firewall that supports event logging through
bpf_perf_event_output(). Each event has a timestamp and currently we use
bpf_ktime_get_ns() for it. Use of bpf_ktime_get_coarse_ns() saves ~15-20
ns in time required for event logging.
bpf_ktime_get_ns():
EgressLogByRemoteEndpoint 113.82ns 8.79M
bpf_ktime_get_coarse_ns():
EgressLogByRemoteEndpoint 95.40ns 10.48M
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117184549.257280-1-me@ubique.spb.ru
This Kunit update for Linux 5.10-rc5 consists of several fixes Kunit
documentation, tool, compile time fixes not pollute source directory,
and fix to remove tools/testing/kunit/.gitattributes file.
-----BEGIN PGP SIGNATURE-----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=mGWU
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several fixes to Kunit documentation and tools, and to not pollute
the source directory.
Also remove the incorrect kunit .gitattributes file"
* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix display of failed expectations for strings
kunit: tool: fix extra trailing \n in raw + parsed test output
kunit: tool: print out stderr from make (like build warnings)
KUnit: Docs: usage: wording fixes
KUnit: Docs: style: fix some Kconfig example issues
KUnit: Docs: fix a wording typo
kunit: Do not pollute source directory with generated files (test.log)
kunit: Do not pollute source directory with generated files (.kunitconfig)
kunit: tool: fix pre-existing python type annotation errors
kunit: Fix kunit.py parse subcommand (use null build_dir)
kunit: tool: unmark test_data as binary blobs
Use a statically generated key for signing the enclave, because
generating keys on the fly can eat the kernel entropy pool. Another
good reason for doing this is predictable builds. The RSA has been
arbitrarily selected. It's contents do not matter.
This also makes the selftest execute a lot quicker instead of the delay
that it had before (because of slow key generation).
[ bp: Disambiguate "static key" which means something else in the
kernel, fix typos. ]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-kselftest@vger.kernel.org
Link: https://lkml.kernel.org/r/20201118170640.39629-1-jarkko@kernel.org
Add a selftest for SGX. It is a trivial test where a simple enclave
copies one 64-bit word of memory between two memory locations,
but ensures that all SGX hardware and software infrastructure is
functioning.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jethro Beekman <jethro@fortanix.com>
Cc: linux-kselftest@vger.kernel.org
Link: https://lkml.kernel.org/r/20201112220135.165028-21-jarkko@kernel.org
The test forks a child process, updates the local storage to set/unset
the securexec bit.
The BPF program in the test attaches to bprm_creds_for_exec which checks
the local storage of the current task to set the secureexec bit on the
binary parameters (bprm).
The child then execs a bash command with the environment variable
TMPDIR set in the envp. The bash command returns a different exit code
based on its observed value of the TMPDIR variable.
Since TMPDIR is one of the variables that is ignored by the dynamic
loader when the secureexec bit is set, one should expect the
child execution to not see this value when the secureexec bit is set.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117232929.2156341-2-kpsingh@chromium.org
The helper allows modification of certain bits on the linux_binprm
struct starting with the secureexec bit which can be updated using the
BPF_F_BPRM_SECUREEXEC flag.
secureexec can be set by the LSM for privilege gaining executions to set
the AT_SECURE auxv for glibc. When set, the dynamic linker disables the
use of certain environment variables (like LD_PRELOAD).
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117232929.2156341-1-kpsingh@chromium.org
Add missing define of ALIGN_DOWN to make the test build and run. In
addition, __sg_alloc_table_from_pages now support unaligned maximum
segment, so adapt the test result accordingly.
Fixes: 07da1223ec ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20201115120623.139113-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Fix file corruption due to event deletion in 'perf inject'.
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem
memcpy', silencing perf build warning.
- Avoid an msan warning in a copied stack in 'perf test'.
- Correct tracepoint field name "flags" in ARM's CS-ETM hardware tracing
'perf test' entry.
- Update branch sample pattern for cs-etm to cope with excluding guest
in userspace counting.
- Don't free "lock_seq_stat" if read_count isn't zero in 'perf lock'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
$ export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc3.tar.xz
$ dm
1 71.39 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 70.77 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 73.70 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 82.24 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 82.21 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 84.79 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 106.15 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 120.21 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 111.49 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 119.72 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 70.03 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 86.89 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 84.45 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 67.56 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 101.57 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 22.59 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 22.50 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 12.05 centos:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
Ancient gcc get this wrong:
/git/linux/tools/lib/bpf/libbpf.h:203: error: wrong number of arguments specified for 'deprecated' attribute
But when using NO_LIBBPF we should not hit this, changes for that to happen will land in 5.11 as they require
more surgery than advisable for this late in 5.10 rc.
19 32.72 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
20 118.02 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
21 62.52 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201105 releases/gcc-10.2.0-465-g2b4cba9a30, clang version 10.0.1
22 78.48 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 79.18 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 76.33 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
25 93.16 debian:experimental : Ok gcc (Debian 10.2.0-16) 10.2.0, Debian clang version 11.0.0-4
26 30.47 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
27 31.23 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
28 31.77 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
29 70.66 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
30 82.84 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
31 25.41 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
32 84.37 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
33 96.38 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
34 97.16 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
35 107.89 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
36 113.43 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
37 117.85 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
38 25.36 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
39 116.54 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-4.fc31)
40 98.36 fedora:32 : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
41 97.72 fedora:33 : Ok gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
42 98.60 fedora:rawhide : Ok gcc (GCC) 10.2.1 20201112 (Red Hat 10.2.1-8), clang version 11.0.0 (Fedora 11.0.0-2.fc34)
43 35.00 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
44 70.27 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
45 86.27 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
46 103.63 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1
47 228.99 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang 63e22714ac938c6b537bd958f70680d3331a2030)
48 120.44 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
49 127.26 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
50 117.76 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
51 114.96 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
52 110.55 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
53 11.81 oraclelinux:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
See explanation for centos:6
54 32.31 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
55 116.81 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
56 28.44 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
57 31.16 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
58 79.71 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
59 27.05 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
60 27.14 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
61 25.89 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
62 26.39 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
63 26.32 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 25.61 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 91.53 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
66 28.76 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
67 27.64 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
68 22.90 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
69 27.23 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
70 29.56 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
71 29.76 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 161.85 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 25.41 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 27.77 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
75 25.38 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 71.37 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
77 27.53 ubuntu:19.10-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
78 24.90 ubuntu:19.10-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
79 75.35 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
80 31.41 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
81 76.36 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
$
# uname -a
Linux quaco 5.8.14-200.fc32.x86_64 #1 SMP Wed Oct 7 14:47:56 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
568beb2795 perf test: Avoid an msan warning in a copied stack.
# perf version --build-options
perf version 5.10.rc3.g568beb27959b
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Skip (some metrics failed)
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: PE file support : Ok
69: Event expansion for cgroups : Ok
70: x86 rdpmc : Ok
71: Convert perf time to TSC : Ok
72: DWARF unwind : Ok
73: x86 instruction decoder - new instructions : Ok
74: Intel PT packet decoder : Ok
75: x86 bp modify : Ok
76: probe libc's inet_pton & backtrace it with ping : Ok
77: Use vfs_getname probe to get syscall args filenames : Ok
78: Check Arm CoreSight trace data recording and synthesized samples: Skip
79: build id cache operations : Ok
80: Add vfs_getname probe to get syscall args filenames : Ok
81: Check open filename arg using perf trace + vfs_getname : Ok
82: Zstd perf.data compression/decompression : Ok
#
$ git log --oneline -1
568beb2795 (HEAD -> perf/urgent) perf test: Avoid an msan warning in a copied stack.
$ time make -C tools/perf build-test
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_with_gtk2_O: make GTK2=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_doc_O: make doc
make_no_libbpf_O: make NO_LIBBPF=1
make_help_O: make help
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_sdt_O: make NO_SDT=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_libelf_O: make NO_LIBELF=1
make_clean_all_O: make clean all
make_no_demangle_O: make NO_DEMANGLE=1
make_install_O: make install
make_no_libnuma_O: make NO_LIBNUMA=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_tags_O: make tags
make_debug_O: make DEBUG=1
make_no_libperl_O: make NO_LIBPERL=1
make_install_bin_O: make install-bin
make_perf_o_O: make perf.o
make_install_prefix_O: make install prefix=/tmp/krava
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_gtk2_O: make NO_GTK2=1
make_with_libpfm4_O: make LIBPFM4=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_no_slang_O: make NO_SLANG=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_newt_O: make NO_NEWT=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_util_map_o_O: make util/map.o
make_no_auxtrace_O: make NO_AUXTRACE=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_pure_O: make
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCX7PMcgAKCRCyPKLppCJ+
J949AQC2VhJloCuRJD/7AzztTXQ0nv3d2YqKwuQGmEvxu9dvswEAmYNY4A+bJa1P
mdZeOw23I92QX35dd6O2ncU9isWOhAI=
=ABnD
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.10-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix file corruption due to event deletion in 'perf inject'.
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem
memcpy', silencing perf build warning.
- Avoid an msan warning in a copied stack in 'perf test'.
- Correct tracepoint field name "flags" in ARM's CS-ETM hardware
tracing 'perf test' entry.
- Update branch sample pattern for cs-etm to cope with excluding guest
in userspace counting.
- Don't free "lock_seq_stat" if read_count isn't zero in 'perf lock'.
* tag 'perf-tools-fixes-for-v5.10-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test: Avoid an msan warning in a copied stack.
perf inject: Fix file corruption due to event deletion
perf test: Update branch sample pattern for cs-etm
perf test: Fix a typo in cs-etm testing
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
perf lock: Don't free "lock_seq_stat" if read_count isn't zero
perf lock: Correct field name "flags"
When operating on split BTF, btf__find_by_name[_kind] will not
iterate over all types since they use btf->nr_types to show
the number of types to iterate over. For split BTF this is
the number of types _on top of base BTF_, so it will
underestimate the number of types to iterate over, especially
for vmlinux + module BTF, where the latter is much smaller.
Use btf__get_nr_types() instead.
Fixes: ba451366bf ("libbpf: Implement basic split BTF support")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1605437195-2175-1-git-send-email-alan.maguire@oracle.com
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 65b4414a05 ("selftests/bpf: add sockopt test that exercises BPF_F_ALLOW_MULTI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201116101633.64627-1-wanghai38@huawei.com
This fix is for a failure that occurred in the DWARF unwind perf test.
Stack unwinders may probe memory when looking for frames.
Memory sanitizer will poison and track uninitialized memory on the
stack, and on the heap if the value is copied to the heap.
This can lead to false memory sanitizer failures for the use of an
uninitialized value.
Avoid this problem by removing the poison on the copied stack.
The full msan failure with track origins looks like:
==2168==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22
#1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13
#2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#24 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10
#1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13
#2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18
#3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#25 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2
#2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9
#3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6
#4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#17 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events'
#0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445
SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandeep Dasgupta <sdasgup@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201113182053.754625-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"perf inject" can create corrupt files when synthesizing sample events from AUX
data. This happens when in the input file, the first event (for the AUX data)
has a different sample_type from the second event (generally dummy).
Specifically, they differ in the bits that indicate the standard fields
appended to perf records in the mmap buffer. "perf inject" deletes the first
event and moves up the second event to first position.
The problem is with the synthetic PERF_RECORD_MMAP (etc.) events created
by "perf record".
Since these are synthetic versions of events which are normally produced
by the kernel, they have to have the standard fields appended as
described by sample_type.
"perf record" fills these in with zeroes, including the IDENTIFIER
field; perf readers interpret records with zero IDENTIFIER using the
descriptor for the first event in the file.
Since "perf inject" changes the first event, these synthetic records are
then processed with the wrong value of sample_type, and the perf reader
reads bad data, reports on incorrect length records etc.
Mismatching sample_types are seen with "perf record -e cs_etm//", where the AUX
event has TID|TIME|CPU|IDENTIFIER and the dummy event has TID|TIME|IDENTIFIER.
Perhaps they could be the same, but it isn't normally a problem if they aren't
- perf has no problems reading the file.
The sample_types have to agree on the position of IDENTIFIER, because
that's how perf finds the right event descriptor in the first place, but
they don't normally have to agree on other fields, and perf doesn't
check that they do.
The problem is specific to the way "perf inject" reorganizes the events
and the way synthetic MMAP events are recorded with a zero identifier. A
simple solution is to stop "perf inject" deleting the tracing event.
Committer testing
Removed the now unused 'evsel' variable, update the comment about the
evsel removal not being performed anymore, and apply the patch manually
as it failed with this warning:
warning: Patch sent with format=flowed; space at the end of lines might be lost.
Testing it with:
$ perf bench internals inject-build-id
# Running 'internals/inject-build-id' benchmark:
Average build-id injection took: 8.543 msec (+- 0.130 msec)
Average time per event: 0.838 usec (+- 0.013 usec)
Average memory usage: 12717 KB (+- 9 KB)
Average build-id-all injection took: 5.710 msec (+- 0.058 msec)
Average time per event: 0.560 usec (+- 0.006 usec)
Average memory usage: 12079 KB (+- 7 KB)
$
Signed-off-by: Al Grant <al.grant@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LPU-Reference: b9cf5611-daae-2390-3439-6617f8f0a34b@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
... instead of poking at the MSR. For that, move the accessor functions
to misc.c and add a sysfs-writing function too.
There should be no functional changes resulting from this.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Renninger <trenn@suse.com>
Link: https://lkml.kernel.org/r/20201029190259.3476-2-bp@alien8.de
From second fragment on, IPV6FR program must stop the dissection of IPV6
fragmented packet. This is the same approach used for IPV4 fragmentation.
This fixes the flow keys calculation for the upper-layer protocols.
Note that according to RFC8200, the first fragment packet must include
the upper-layer header.
Signed-off-by: Santucci Pierpaolo <santucci@epigenesys.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/X7JUzUj34ceE2wBm@santucci.pierpaolo
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently verifier enforces return code checks for subprograms in the
same manner as it does for program entry points. This prevents returning
arbitrary scalar values from subprograms. Scalar type of returned values
is checked by btf_prepare_func_args() and hence it should be safe to
allow only scalars for now. Relax return code checks for subprograms and
allow any correct scalar values.
Fixes: 51c39bb1d5 (bpf: Introduce function-by-function verification)
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201113171756.90594-1-me@ubique.spb.ru
progfd is created by prog_parse_fd() in do_attach() and before the latter
returns in case of success, the file descriptor should be closed.
Fixes: 04949ccc27 ("tools: bpftool: add net attach command to attach XDP on interface")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201113115152.53178-1-wanghai38@huawei.com
This patch tests storing the task's related info into the
bpf_sk_storage by fentry/fexit tracing at listen, accept,
and connect. It also tests the raw_tp at inet_sock_set_state.
A negative test is done by tracing the bpf_sk_storage_free()
and using bpf_sk_storage_get() at the same time. It ensures
this bpf program cannot load.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201112211320.2587537-1-kafai@fb.com
Add few assembly tests for packet comparison.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201111031213.25109-4-alexei.starovoitov@gmail.com
When working on the rp_filter problem, I didn't realise that disabling
it on the network devices didn't cover all cases: rp_filter could also
be enabled globally in the namespace, in which case it would drop
packets, even if the net device has rp_filter=0.
Fixes: 1ccd58331f ("selftests: disable rp_filter when testing bareudp")
Fixes: bbbc7aa45e ("selftests: add test script for bareudp tunnels")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/f2d459346471f163b239aa9d63ce3e2ba9c62895.1605107012.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- net: udp: fix out-of-order packets when forwarding with UDP GSO
fraglists turned on
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter rules
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AKM7
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"
* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
Since the commit 943b69ac18 ("perf parse-events: Set exclude_guest=1
for user-space counting"), 'exclude_guest=1' is set for user-space
counting; and the branch sample's modifier has been altered, the sample
event name has been changed from "branches:u:" to "branches:uH:", which
gives out info for "user-space and host counting".
But the cs-etm testing's regular expression cannot match the updated
branch sample event and leads to test failure.
This patch updates the branch sample pattern by using a more flexible
expression '.*' to match branch sample's modifiers, so that allows the
testing to work as expected.
Fixes: 943b69ac18 ("perf parse-events: Set exclude_guest=1 for user-space counting")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20201110063417.14467-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a typo: s/devce_name/device_name.
Fixes: fe0aed19b2 ("perf test: Introduce script for Arm CoreSight testing")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20201110063417.14467-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To bring in the change made in this cset:
4d6ffa27b8 ("x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S")
6dcc5627f6 ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*")
I needed to define SYM_FUNC_START_LOCAL() as SYM_L_GLOBAL as
mem{cpy,set}_{orig,erms} are used by 'perf bench'.
This silences these perf tools build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When execute command "perf lock report", it hits failure and outputs log
as follows:
perf: builtin-lock.c:623: report_lock_release_event: Assertion `!(seq->read_count < 0)' failed.
Aborted
This is an imbalance issue. The locking sequence structure
"lock_seq_stat" contains the reader counter and it is used to check if
the locking sequence is balance or not between acquiring and releasing.
If the tool wrongly frees "lock_seq_stat" when "read_count" isn't zero,
the "read_count" will be reset to zero when allocate a new structure at
the next time; thus it causes the wrong counting for reader and finally
results in imbalance issue.
To fix this issue, if detects "read_count" is not zero (means still have
read user in the locking sequence), goto the "end" tag to skip freeing
structure "lock_seq_stat".
Fixes: e4cef1f650 ("perf lock: Fix state machine to recognize lock sequence")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201104094229.17509-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracepoint "lock:lock_acquire" contains field "flags" but not
"flag". Current code wrongly retrieves value from field "flag" and it
always gets zero for the value, thus "perf lock" doesn't report the
correct result.
This patch replaces the field name "flag" with "flags", so can read out
the correct flags for locking.
Fixes: e4cef1f650 ("perf lock: Fix state machine to recognize lock sequence")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201104094229.17509-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make $(LIBBPF)-clean and $(LIBBPF_BOOTSTRAP)-clean .PHONY targets, in
case those files exist. And keep consistency within the Makefile by
making the directory dependencies order-only.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201112091049.3159055-2-jean-philippe@linaro.org
Correct attribute name is "unused". maybe_unused is a C++17 addition.
This patch fixes compilation warning during selftests compilation.
Fixes: 197afc6314 ("libbpf: Don't attempt to load unused subprog as an entry-point BPF program")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201111231215.1779147-1-andrii@kernel.org
This test will treat all non-zero return codes as failures, it will
make the pmtu.sh test script being marked as FAILED when some
sub-test got skipped.
Improve the result processing by
* Only mark the whole test script as SKIP when all of the
sub-tests were skipped
* If the sub-tests were either passed or skipped, the overall
result will be PASS
* If any of them has failed with return code 1 or anything bad
happened (e.g. return code 127 for command not found), the
overall result will be FAIL
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test uses return code 2 as a hard-coded skipped state, let's use
the kselftest framework skip code variable $ksft_skip instead to make
it more readable and easier to maintain.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ba2fd563b7 ("tools/bpftool: Support passing BPFTOOL_VERSION to
make") changed BPFTOOL_VERSION to a recursively expanded variable,
forcing it to be recomputed on every expansion of CFLAGS and
dramatically slowing down the bpftool build. Restore BPFTOOL_VERSION as
a simply expanded variable, guarded by an ifeq().
Fixes: ba2fd563b7 ("tools/bpftool: Support passing BPFTOOL_VERSION to make")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-8-jean-philippe@linaro.org
When cross building runqslower for an other architecture, the
intermediate bpftool used to generate a skeleton must be built using the
host toolchain. Pass HOSTCC and HOSTLD, defined in Makefile.include, to
the bpftool Makefile.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-7-jean-philippe@linaro.org
Makefile.include defines variables such as OUTPUT and CC for out-of-tree
build and cross-build. Include it into the runqslower Makefile and use
its $(QUIET*) helpers.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-5-jean-philippe@linaro.org
The bpftool build first creates an intermediate binary, executed on the
host, to generate skeletons required by the final build. When
cross-building bpftool for an architecture different from the host, the
intermediate binary should be built using the host compiler (gcc) and
the final bpftool using the cross compiler (e.g. aarch64-linux-gnu-gcc).
Generate the intermediate objects into the bootstrap/ directory using
the host toolchain.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-4-jean-philippe@linaro.org
Cleaning a partial build can fail if the output directory for libbpf
wasn't created:
$ make -C tools/bpf/bpftool O=/tmp/bpf clean
/bin/sh: line 0: cd: /tmp/bpf/libbpf/: No such file or directory
tools/scripts/Makefile.include:17: *** output directory "/tmp/bpf/libbpf/" does not exist. Stop.
make: *** [Makefile:36: /tmp/bpf/libbpf/libbpf.a-clean] Error 2
As a result make never gets around to clearing the leftover objects. Add
the libbpf output directory as clean dependency to ensure clean always
succeeds (similarly to the "descend" macro). The directory is later
removed by the clean recipe.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-3-jean-philippe@linaro.org
Several Makefiles in tools/ need to define the host toolchain variables.
Move their definition to tools/scripts/Makefile.include
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
In comment 173ca26e9b ("samples/bpf: add comprehensive ipip, ipip6,
ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit
933a741e3b ("selftests/bpf: bpf tunnel test.") when we moved it to
the current folder, we didn't add it.
This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's
topology for both IPv4 and IPv6 testing. Since iperf test is removed as
currect framework simplified it in purpose, I also removed unused tcp
checkings in test_tunnel_kern.c.
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-2-liuhangbin@gmail.com
Display vmlinux BTF name and kernel module names when listing available BTFs
on the system.
In human-readable output mode, module BTFs are reported with "name
[module-name]", while vmlinux BTF will be reported as "name [vmlinux]".
Square brackets are added by bpftool and follow kernel convention when
displaying modules in human-readable text outputs.
[vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s
1: name [vmlinux] size 4082281B
6: size 2365B prog_ids 8,6 map_ids 3
7: name [button] size 46895B
8: name [pcspkr] size 42328B
9: name [serio_raw] size 39375B
10: name [floppy] size 57185B
11: name [i2c_core] size 76186B
12: name [crc32c_intel] size 16036B
13: name [i2c_piix4] size 50497B
14: name [irqbypass] size 14124B
15: name [kvm] size 197985B
16: name [kvm_intel] size 123564B
17: name [cryptd] size 42466B
18: name [crypto_simd] size 17187B
19: name [glue_helper] size 39205B
20: name [aesni_intel] size 41034B
25: size 36150B
pids bpftool(2519)
In JSON mode, two fields (boolean "kernel" and string "name") are reported for
each BTF object. vmlinux BTF is reported with name "vmlinux" (kernel itself
returns and empty name for vmlinux BTF).
[vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s -jp
[{
"id": 1,
"size": 4082281,
"prog_ids": [],
"map_ids": [],
"kernel": true,
"name": "vmlinux"
},{
"id": 6,
"size": 2365,
"prog_ids": [8,6
],
"map_ids": [3
],
"kernel": false
},{
"id": 7,
"size": 46895,
"prog_ids": [],
"map_ids": [],
"kernel": true,
"name": "button"
},{
...
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-6-andrii@kernel.org
Allocate ID for vmlinux BTF. This makes it visible when iterating over all BTF
objects in the system. To allow distinguishing vmlinux BTF (and later kernel
module BTF) from user-provided BTFs, expose extra kernel_btf flag, as well as
BTF name ("vmlinux" for vmlinux BTF, will equal to module's name for module
BTF). We might want to later allow specifying BTF name for user-provided BTFs
as well, if that makes sense. But currently this is reserved only for
in-kernel BTFs.
Having in-kernel BTFs exposed IDs will allow to extend BPF APIs that require
in-kernel BTF type with ability to specify BTF types from kernel modules, not
just vmlinux BTF. This will be implemented in a follow up patch set for
fentry/fexit/fmod_ret/lsm/etc.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-3-andrii@kernel.org
Some systems have rp_filter=1 as default configuration. This breaks
bareudp.sh as the intermediate namespaces handle part of the routing
with regular IPv4 routes but the reverse path is done with tc
(flower/tunnel_key/mirred).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/28140b7d20161e4f766b558018fe2718f9bc1117.1604767577.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For simplcity, strip all trailing whitespace from parsed output.
I imagine no one is printing out meaningful trailing whitespace via
KUNIT_FAIL() or similar, and that if they are, they really shouldn't.
`isolate_kunit_output()` yielded liens with trailing \n, which results
in artifacty output like this:
$ ./tools/testing/kunit/kunit.py run
[16:16:46] [FAILED] example_simple_test
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
After this change:
[16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[16:16:46] Expected 1 + 1 == 3, but
[16:16:46] 1 + 1 == 2
[16:16:46] 3 == 3
[16:16:46] not ok 1 - example_simple_test
[16:16:46]
We should *not* be expecting lines to end with \n in kunit_tool_test.py
for this reason.
Do the same for `raw_output()` as well which suffers from the same
issue.
This is a followup to [1], but rebased onto kunit-fixes to pick up the
other raw_output() fix and fixes for kunit_tool_test.py.
[1] https://lore.kernel.org/linux-kselftest/20201020233219.4146059-1-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the tool redirects make stdout + stderr, and only shows them
if the make command fails.
This means build warnings aren't shown to the user.
This change prints the contents of stderr even if make succeeds, under
the assumption these are only build warnings or other messages the user
likely wants to see.
We drop stdout from the raised exception since we can no longer easily
collate stdout and stderr and just showing the stderr seems fine.
Example with a warning:
[14:56:35] Building KUnit Kernel ...
../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:6: warning: unused variable ‘unused’ [-Wunused-variable]
19 | int unused;
| ^~~~~~
[14:56:40] Starting KUnit Kernel ...
Note the stderr has a trailing \n, and since we use print, we add
another, but it helps separate make and kunit.py output.
Example with a build error:
[15:02:45] Building KUnit Kernel ...
ERROR:root:../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:2: error: unknown type name ‘invalid_type’
19 | invalid_type *test = data;
| ^~~~~~~~~~~~
...
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The code uses annotations, but they aren't accurate.
Note that type checking in python is a separate process, running
`kunit.py run` will not check and complain about invalid types at
runtime.
Fix pre-existing issues found by running a type checker
$ mypy *.py
All but one of these were returning `None` without denoting this
properly (via `Optional[Type]`).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When JSON support was added in [1], the KunitParseRequest tuple was
updated to contain a 'build_dir' field, but kunit.py parse doesn't
accept --build_dir as an option. The code nevertheless tried to access
it, resulting in this error:
AttributeError: 'Namespace' object has no attribute 'build_dir'
Given that the parser only uses the build_dir variable to set the
'build_environment' json field, we set it to None (which gives the JSON
'null') for now. Ultimately, we probably do want to be able to set this,
but since it's new functionality which (for the parse subcommand) never
worked, this is the quickest way of getting it back up and running.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/commit/?h=kunit-fixes&id=21a6d1780d5bbfca0ce9b8104ca6233502fcbf86
Fixes: 21a6d1780d ("kunit: tool: allow generating test results in JSON")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The tools/testing/kunit/test_data/ directory was marked as binary
because some of the test_data files cause checkpatch warnings. Fix this
by dropping the .gitattributes file.
Fixes: afc63da64f ("kunit: kunit_parser: make parser more robust")
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull turbostat updates from Len Brown:
"Update update to version 20.09.30, one kernel side fix"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number
powercap: restrict energy meter to root access
tools/power turbostat: harden against cpu hotplug
tools/power turbostat: adjust for temperature offset
tools/power turbostat: Build with _FILE_OFFSET_BITS=64
tools/power turbostat: Support AMD Family 19h
tools/power turbostat: Remove empty columns for Jacobsville
tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz.
tools/power x86_energy_perf_policy: Input/output error in a VM
tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabled
tools/power turbostat: Support additional CPU model numbers
tools/power turbostat: Fix output formatting for ACPI CST enumeration
tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITY
tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0
tools/power turbostat: Enable accumulate RAPL display
tools/power turbostat: Introduce functions to accumulate RAPL consumption
tools/power turbostat: Make the energy variable to be 64 bit
tools/power turbostat: Always print idle in the system configuration header
tools/power turbostat: Print /dev/cpu_dma_latency
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+oiOgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKBQIAJw6oad/FA7j9OO2
dMoaXb8UaBehGWgW2rdfWrFPV5v0DBnp/GkdRpLoZIjV3W4mBfnog7bIa4Eswlxo
Y8sZxo5/3JlgJQUkHvzR1TYk5z61lHkUw9Kj/cCyx6YdbjSl19AfFsnhQVVMuyp9
TXL2c7hxkHlw8eBGrymVu0Ip7Zq0x8O2g+8nQpmRcvaR6SBuSHdikDF/iWCtU1YW
wpk5eWEVaAO67keZOz6b+aCFHqjFX+1dUBBuPnslucYLR73Qi16hfaU9pebe97Gb
lX/MJ1bR9BeRp314cF0PYbm4WhKjRLudHOFJH8x3dj/BiYNrFK3SJGLiiTwsrAZ8
kytU0Xs=
=Ke/D
-----END PGP SIGNATURE-----
Merge v5.10-rc3 into drm-next
We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add an additional control test that verifies:
-specifying two different max_num_members values fails
-specifying max_num_members > PACKET_FANOUT_MAX fails
In datapath tests, set max_num_members to PACKET_FANOUT_MAX.
Signed-off-by: Tanner Love <tannerlove@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some globals in the tcp_hdr_options test and btf_skc_cls_ingress test
are not using static scope. This patch fixes it.
Targeting bpf-next branch as an improvement since it currently does not
break the build.
Fixes: ad2f8eb009 ("bpf: selftests: Tcp header options")
Fixes: 9a856cae22 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201106225402.4135741-1-kafai@fb.com
- Fix compilation error when PMD and PUD are folded
- Fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1
- Add aarch64 get-reg-list test
x86:
- fix semantic conflict between two series merged for 5.10
- fix (and test) enforcement of paravirtual cpuid features
Generic:
- various cleanups to memory management selftests
- new selftests testcase for performance of dirty logging
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+pVjkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO3fAf/ZniW/7FC4pD/M0txXUst3mKNcC16
AbMfN36dvzdWBnAuTVsP2d+XM/sbPNacomcJGfJ5II9TKrb00FUNxU37In7vdbbm
WjpyDEpRDXnCY+OXs7dwY66dEXzv9GTzlQaGuah67AeGpzSuu3zrXlu07di446Gv
ZtHvbzFEvos7cByp3LoPfvbnvv9kkD5mQkOW7wG42hUPrxMNxtHC+qyP92DIpV8d
etDNC95rhdhhZM3LAlvO6Bp4I1uFXpYHEHtIOOT05IB9clNhfdgsuD8wiqWfEo0l
sVhg3yXWbbfGaP3vEZp5QY9qko8I0XjwIWc5hWsIHST7uPqgi8a/wIbbEA==
=jBcA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix compilation error when PMD and PUD are folded
- fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1
- add aarch64 get-reg-list test
x86:
- fix semantic conflict between two series merged for 5.10
- fix (and test) enforcement of paravirtual cpuid features
selftests:
- various cleanups to memory management selftests
- new selftests testcase for performance of dirty logging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: selftests: allow two iterations of dirty_log_perf_test
KVM: selftests: Introduce the dirty log perf test
KVM: selftests: Make the number of vcpus global
KVM: selftests: Make the per vcpu memory size global
KVM: selftests: Drop pointless vm_create wrapper
KVM: selftests: Add wrfract to common guest code
KVM: selftests: Simplify demand_paging_test with timespec_diff_now
KVM: selftests: Remove address rounding in guest code
KVM: selftests: Factor code out of demand_paging_test
KVM: selftests: Use a single binary for dirty/clear log test
KVM: selftests: Always clear dirty bitmap after iteration
KVM: selftests: Add blessed SVE registers to get-reg-list
KVM: selftests: Add aarch64 get-reg-list test
selftests: kvm: test enforcement of paravirtual cpuid features
selftests: kvm: Add exception handling to selftests
selftests: kvm: Clear uc so UCALL_NONE is being properly reported
selftests: kvm: Fix the segment descriptor layout to match the actual layout
KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs
kvm: x86: request masterclock update any time guest uses different msr
kvm: x86: ensure pv_cpuid.features is initialized when enabling cap
...
If BPF code contains unused BPF subprogram and there are no other subprogram
calls (which can realistically happen in real-world applications given
sufficiently smart Clang code optimizations), libbpf will erroneously assume
that subprograms are entry-point programs and will attempt to load them with
UNSPEC program type.
Fix by not relying on subcall instructions and rather detect it based on the
structure of BPF object's sections.
Fixes: 9a94f277c4 ("tools: libbpf: restore the ability to load programs from .text section")
Reported-by: Dmitrii Banshchikov <dbanschikov@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201107000251.256821-1-andrii@kernel.org
Even though one iteration is not enough for the dirty log performance
test (due to the cost of building page tables, zeroing memory etc.)
two is okay and it is the default. Without this patch,
"./dirty_log_perf_test" without any further arguments fails.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dirty log perf test will time verious dirty logging operations
(enabling dirty logging, dirtying memory, getting the dirty log,
clearing the dirty log, and disabling dirty logging) in order to
quantify dirty logging performance. This test can be used to inform
future performance improvements to KVM's dirty logging infrastructure.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We also check the input number of vcpus against the maximum supported.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-8-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-7-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rounding the address the guest writes to a host page boundary
will only have an effect if the host page size is larger than the guest
page size, but in that case the guest write would still go to the same
host page. There's no reason to round the address down, so remove the
rounding to simplify the demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.
No functional change expected.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test. It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.
The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012233.6013-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG
would overwrite it the next time it copies the dirty log onto it.
In the upcoming dirty ring tests we'll start to fetch dirty pages from
a ring buffer, so no one is going to clear the dirty bitmap for us.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012228.5916-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for KVM_GET_REG_LIST regressions. The blessed list was
created by running on v4.15 with the --core-reg-fixup option.
The following script was also used in order to annotate system
registers with their names when possible. When new system
registers are added the names can just be added manually using
the same grep.
while read reg; do
if [[ ! $reg =~ ARM64_SYS_REG ]]; then
printf "\t$reg\n"
continue
fi
encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//")
if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then
printf "\t$reg\n"
continue
fi
name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//")
printf "\t$reg\t/* $name */\n"
done < <(aarch64/get-reg-list --core-reg-fixup --list)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201027231044.655110-7-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure the out value 'uc' in get_ucall() is properly reporting
UCALL_NONE if the call fails. The return value will be correctly
reported, however, the out parameter 'uc' will not be. Clear the struct
to ensure the correct value is being reported in the out parameter.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-11-06
1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.
2) Tighten bpf_lsm function check, from KP.
3) Fix bpftool attaching to flow dissector, from Lorenz.
4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Update verification logic for LSM programs
bpf: Zero-fill re-used per-cpu map element
bpf: BPF_PRELOAD depends on BPF_SYSCALL
tools/bpftool: Fix attaching flow dissector
libbpf: Fix possible use after free in xsk_socket__delete
libbpf: Fix null dereference in xsk_socket__delete
libbpf, hashmap: Fix undefined behavior in hash_bits
bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
tools, bpftool: Remove two unused variables.
tools, bpftool: Avoid array index warnings.
xsk: Fix possible memory leak at socket close
bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
samples/bpf: Set rlimit for memlock to infinity in all samples
bpf: Fix -Wshadow warnings
selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================
Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds comments that label the MP tests' producer and consumer
processes, and also that label the "exists" clause as the bad outcome.
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The use of "x" and "y" for message-passing tests is fine for people
familiar with memory models and litmus-test nomenclature, but is a bit
obtuse for others. This commit therefore substitutes "buf" for "x" and
"flag" for "y" for the MP tests. There are a few special-case MP tests
that use locks and these are unchanged. There is another MP test that
uses pointers, and this is changed to name the pointer "p".
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds type information for global variables in the litmus
tests in order to allow easier use with klitmus7.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The Linux kernel has a number of categories of ordering primitives, which
are recorded in the LKMM implementation and hinted at by cheatsheet.txt.
But there is no overview of these categories, and such an overview
is needed in order to understand multithreaded LKMM litmus tests.
This commit therefore adds an ordering.txt as well as extracting a
control-dependencies.txt from memory-barriers.txt. It also updates the
README file.
[ paulmck: Apply Akira Yokosawa file-placement feedback. ]
[ paulmck: Apply Alan Stern feedback. ]
[ paulmck: Apply self-review feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For the rcutorture test summary log file console.log of virtual machines is
parsed. When a console.log contains "DEBUG", BUG counter is incremented
because regular expression does not handle to ignore DEBUG.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Fix a spelling in the comment line.
s/memry/memory/p
This is on linux-next.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently the kvm-check-branches.sh script calculates the number of CPUs
and passes this to the kvm.sh --cpus command-line argument. This works,
but this commit saves a line by instead using the new kvm.sh --allcpus
command-line argument.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This fixes a typo. Before this, the AT_FDCWD macro would be defined
regardless of whether or not it's been defined before.
Signed-off-by: Samuel Hernandez <sam.hernandez.amador@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit allows --build-only as a synonym for --buildonly, --kconfigs
for --kconfig, and --kmake-args for --kmake-arg.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "--duration <minutes>" has worked well for a very long time, but
it can be inconvenient to compute the minutes for (say) a 28-hour run.
It can also be annoying to have to let a simple boot test run for a full
minute. This commit therefore permits an "s" suffix to specify seconds,
"m" to specify minutes (which remains the default), "h" suffix to specify
hours, and "d" to specify days.
With this change, "--duration 5" still specifies that each scenario
run for five minutes, but "--duration 30s" runs for only 30 seconds,
"--duration 8h" runs for eight hours, and "--duration 2d" runs for
two days.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the rcutorture scripting now deals correctly with full-up
security-induced pointer obfuscation, it is still counter-productive for
kernel hackers who are analyzing console output. This commit therefore
sets the debug_boot_weak_hash kernel boot parameter, which enables
printing of weak-hashed pointers for torture-test runs.
Please note that this change applies only to runs initiated by the
kvm.sh scripting. If you are instead using modprobe and rmmod, it is
your responsibility to build and boot the underlying kernel to your taste.
Please note further that this change does not result in a security hole
in normal use. The rcutorture testing runs with a negligible userspace,
no networking, and no user interaction. Besides which, there is no data
of value that can be extracted from an rcutorture guest OS that could
not also be extracted from the host that this guest is running on.
Suggested-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Even when the kernel panics and qemu dies, runs with jitter enabled will
continue uselessly until the jitter.sh processes terminate. This can
be annoying if a planned one-hour run instead dies during boot.
This commit therefore kills the jitter.sh processes when the run ends
more than one minute prior to the termination time specified by the
kvm.sh --duration argument or its default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The SRCU-u scenario expects to enable lockdep but to also disable the
CONFIG_PREEMPT_COUNT kconfig option. This no longer works. This commit
therefore instead enables lockdep in SRCU-t, which then allows SRCU-u
to disable CONFIG_PREEMPT_COUNT.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "NOHZ tick-stop error: Non-RCU local softirq work is pending"
warning happens frequently and appears to be irrelevant to the various
torture tests. This commit therefore filters it out.
If there proves to be a need to pay attention to it a later commit will
add an "advice" category to allow the user to immediately see that
although something happened, it was not an indictment of the system
being tortured.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcuscale test module does not use batches, so there is only
ever one batch. This commit therefore informs the kvm-recheck-rcuscale.sh
script of this fact of life.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the ability to test performance and scalability of RCU
Tasks Trace updaters.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This Kselftest fixes update for Linux 5.10-rc3 consists of fixes to
ftrace test and several fixes from Tommi Rantala for several tests.
-----BEGIN PGP SIGNATURE-----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=A6KY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to the ftrace test and several fixes from Tommi Rantala for
various other tests"
* tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: binderfs: use SKIP instead of XFAIL
selftests: clone3: use SKIP instead of XFAIL
selftests: core: use SKIP instead of XFAIL in close_range_test.c
selftests: proc: fix warning: _GNU_SOURCE redefined
selftests: pidfd: drop needless linux/kcmp.h inclusion in pidfd_setns_test.c
selftests: pidfd: add CONFIG_CHECKPOINT_RESTORE=y to config
selftests: pidfd: skip test on kcmp() ENOSYS
selftests: pidfd: use ksft_test_result_skip() when skipping test
selftests/harness: prettify SKIP message whitespace again
selftests: pidfd: fix compilation errors due to wait.h
selftests: filter kselftest headers from command in lib.mk
selftests/ftrace: check for do_sys_openat2 in user-memory test
selftests/ftrace: Use $FUNCTION_FORK to reference kernel fork function
pidfd_open was added in 2019. Some versions of libc library don't define it.
Define it manually if it's not available.
Reported-by: Sergei Iudin <siudin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
and netfilter subtrees.
Current release - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous release - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even
if inner packet has IP_DF (don't fragment) set in its header
(when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break
gso support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous release - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need
to be dropped
- always clone the skbs to make sure they have a reference on
the socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5R2w
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc3, including fixes from wireless, can, and
netfilter subtrees.
Current merge window - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous releases - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
inner packet has IP_DF (don't fragment) set in its header (when
TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous releases - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need to
be dropped
- always clone the skbs to make sure they have a reference on the
socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200"
* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
ionic: check port ptr before use
r8169: work around short packet hw bug on RTL8125
net: openvswitch: silence suspicious RCU usage warning
chelsio/chtls: fix always leaking ctrl_skb
chelsio/chtls: fix memory leaks caused by a race
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
...
Test various aspects of the nexthop offload API on top of the netdevsim
implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the check_syscall_operations added for task_local_storage to
exercise syscall operations for other local storage maps:
* Check the absence of an element for the given fd.
* Create a new element, retrieve and compare its value.
* Delete the element and check again for absence.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-10-kpsingh@chromium.org
The test exercises the syscall based map operations by creating a pidfd
for the current process.
For verifying kernel / LSM functionality, the test implements a simple
MAC policy which denies an executable from unlinking itself. The LSM
program bprm_committed_creds sets a task_local_storage with a pointer to
the inode. This is then used to detect if the task is trying to unlink
itself in the inode_unlink LSM hook.
The test copies /bin/rm to /tmp and executes it in a child thread with
the intention of deleting itself. A successful test should prevent the
the running executable from deleting itself.
The bpf programs are also updated to call bpf_spin_{lock, unlock} to
trigger the verfier checks for spin locks.
The temporary file is cleaned up later in the test.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-9-kpsingh@chromium.org
With the fixing of BTF pruning of embedded types being fixed, the test
can be simplified to use vmlinux.h
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-8-kpsingh@chromium.org
The {inode,sk}_storage_result checking if the correct value was retrieved
was being clobbered unconditionally by the return value of the
bpf_{inode,sk}_storage_delete call.
Also, consistently use the newly added BPF_LOCAL_STORAGE_GET_F_CREATE
flag.
Fixes: cd324d7abb ("bpf: Add selftests for local_storage")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-7-kpsingh@chromium.org
The currently available bpf_get_current_task returns an unsigned integer
which can be used along with BPF_CORE_READ to read data from
the task_struct but still cannot be used as an input argument to a
helper that accepts an ARG_PTR_TO_BTF_ID of type task_struct.
In order to implement this helper a new return type, RET_PTR_TO_BTF_ID,
is added. This is similar to RET_PTR_TO_BTF_ID_OR_NULL but does not
require checking the nullness of returned pointer.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-6-kpsingh@chromium.org
Updates the binary to handle the BPF_MAP_TYPE_TASK_STORAGE as
"task_storage" for printing and parsing. Also updates the documentation
and bash completion
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-5-kpsingh@chromium.org
Updates the bpf_probe_map_type API to also support
BPF_MAP_TYPE_TASK_STORAGE similar to other local storage maps.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-4-kpsingh@chromium.org
Similar to bpf_local_storage for sockets and inodes add local storage
for task_struct.
The life-cycle of storage is managed with the life-cycle of the
task_struct. i.e. the storage is destroyed along with the owning task
with a callback to the bpf_task_storage_free from the task_free LSM
hook.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in
the security blob which are now stackable and can co-exist with other
LSMs.
The userspace map operations can be done by using a pid fd as a key
passed to the lookup, update and delete operations.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-3-kpsingh@chromium.org
Currently key_size of hashtab is limited to MAX_BPF_STACK.
As the key of hashtab can also be a value from a per cpu map it can be
larger than MAX_BPF_STACK.
The use-case for this patch originates to implement allow/disallow
lists for files and file paths. The maximum length of file paths is
defined by PATH_MAX with 4096 chars including nul.
This limit exceeds MAX_BPF_STACK.
Changelog:
v5:
- Fix cast overflow
v4:
- Utilize BPF skeleton in tests
- Rebase
v3:
- Rebase
v2:
- Add a test for bpf side
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201029201442.596690-1-dev@der-flo.net
Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).
The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.
A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
Add ability to work with split BTF by providing extra -B flag, which allows to
specify the path to the base BTF file.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-12-andrii@kernel.org
Add selftests validating BTF deduplication for split BTF case. Add a helper
macro that allows to validate entire BTF with raw BTF dump, not just
type-by-type. This saves tons of code and complexity.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-11-andrii@kernel.org
In some cases compiler seems to generate distinct DWARF types for identical
arrays within the same CU. That seems like a bug, but it's already out there
and breaks type graph equivalence checks, so accommodate it anyway by checking
for identical arrays, regardless of their type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-10-andrii@kernel.org
Add support for deduplication split BTFs. When deduplicating split BTF, base
BTF is considered to be immutable and can't be modified or adjusted. 99% of
BTF deduplication logic is left intact (module some type numbering adjustments).
There are only two differences.
First, each type in base BTF gets hashed (expect VAR and DATASEC, of course,
those are always considered to be self-canonical instances) and added into
a table of canonical table candidates. Hashing is a shallow, fast operation,
so mostly eliminates the overhead of having entire base BTF to be a part of
BTF dedup.
Second difference is very critical and subtle. While deduplicating split BTF
types, it is possible to discover that one of immutable base BTF BTF_KIND_FWD
types can and should be resolved to a full STRUCT/UNION type from the split
BTF part. This is, obviously, can't happen because we can't modify the base
BTF types anymore. So because of that, any type in split BTF that directly or
indirectly references that newly-to-be-resolved FWD type can't be considered
to be equivalent to the corresponding canonical types in base BTF, because
that would result in a loss of type resolution information. So in such case,
split BTF types will be deduplicated separately and will cause some
duplication of type information, which is unavoidable.
With those two changes, the rest of the algorithm manages to deduplicate split
BTF correctly, pointing all the duplicates to their canonical counter-parts in
base BTF, but also is deduplicating whatever unique types are present in split
BTF on their own.
Also, theoretically, split BTF after deduplication could end up with either
empty type section or empty string section. This is handled by libbpf
correctly in one of previous patches in the series.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-9-andrii@kernel.org
Make data section layout checks stricter, disallowing overlap of types and
strings data.
Additionally, allow BTFs with no type data. There is nothing inherently wrong
with having BTF with no types (put potentially with some strings). This could
be a situation with kernel module BTFs, if module doesn't introduce any new
type information.
Also fix invalid offset alignment check for btf->hdr->type_off.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-8-andrii@kernel.org
Add re-usable btf_helpers.{c,h} to provide BTF-related testing routines. Start
with adding a raw BTF dumping helpers.
Raw BTF dump is the most succinct and at the same time a very human-friendly
way to validate exact contents of BTF types. Cross-validate raw BTF dump and
writable BTF in a single selftest. Raw type dump checks also serve as a good
self-documentation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-7-andrii@kernel.org
Support split BTF operation, in which one BTF (base BTF) provides basic set of
types and strings, while another one (split BTF) builds on top of base's types
and strings and adds its own new types and strings. From API standpoint, the
fact that the split BTF is built on top of the base BTF is transparent.
Type numeration is transparent. If the base BTF had last type ID #N, then all
types in the split BTF start at type ID N+1. Any type in split BTF can
reference base BTF types, but not vice versa. Programmatically construction of
a split BTF on top of a base BTF is supported: one can create an empty split
BTF with btf__new_empty_split() and pass base BTF as an input, or pass raw
binary data to btf__new_split(), or use btf__parse_xxx_split() variants to get
initial set of split types/strings from the ELF file with .BTF section.
String offsets are similarly transparent and are a logical continuation of
base BTF's strings. When building BTF programmatically and adding a new string
(explicitly with btf__add_str() or implicitly through appending new
types/members), string-to-be-added would first be looked up from the base
BTF's string section and re-used if it's there. If not, it will be looked up
and/or added to the split BTF string section. Similarly to type IDs, types in
split BTF can refer to strings from base BTF absolutely transparently (but not
vice versa, of course, because base BTF doesn't "know" about existence of
split BTF).
Internal type index is slightly adjusted to be zero-indexed, ignoring a fake
[0] VOID type. This allows to handle split/base BTF type lookups transparently
by using btf->start_id type ID offset, which is always 1 for base/non-split
BTF and equals btf__get_nr_types(base_btf) + 1 for the split BTF.
BTF deduplication is not yet supported for split BTF and support for it will
be added in separate patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-5-andrii@kernel.org
Revamp BTF dedup's string deduplication to match the approach of writable BTF
string management. This allows to transfer deduplicated strings index back to
BTF object after deduplication without expensive extra memory copying and hash
map re-construction. It also simplifies the code and speeds it up, because
hashmap-based string deduplication is faster than sort + unique approach.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-4-andrii@kernel.org
Remove the requirement of a strictly exact string section contents. This used
to be true when string deduplication was done through sorting, but with string
dedup done through hash table, it's no longer true. So relax test harness to
relax strings checks and, consequently, type checks, which now don't have to
have exactly the same string offsets.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-3-andrii@kernel.org
Factor out commiting of appended type data. Also extract fetching the very
last type in the BTF (to append members to). These two operations are common
across many APIs and will be easier to refactor with split BTF, if they are
extracted into a single place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-2-andrii@kernel.org
My earlier patch to reject non-zero arguments to flow dissector attach
broke attaching via bpftool. Instead of 0 it uses -1 for target_fd.
Fix this by passing a zero argument when attaching the flow dissector.
Fixes: 1b514239e8 ("bpf: flow_dissector: Check value of unused flags to BPF_PROG_ATTACH")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105115230.296657-1-lmb@cloudflare.com
This Kunit update for Linux 5.10-rc3 consists of several kunit_tool
and documentation fixes.
-----BEGIN PGP SIGNATURE-----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=2gLZ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several kunit_tool and documentation fixes"
* tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tools: fix kunit_tool tests for parsing test plans
Documentation: kunit: Update Kconfig parts for KUNIT's module support
kunit: test: fix remaining kernel-doc warnings
kunit: Don't fail test suites if one of them is empty
kunit: Fix kunit.py --raw_output option
Makefile already contains -D_GNU_SOURCE, so we can remove it from the
*.c files.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch added the test case for retransmitting ADD_ADDR when timeout
occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
echo packets.
Here we need to slow down the transfer process of all data to let the
ADD_ADDR suboptions can be retransmitted three times. So we added a new
parameter "speed" for do_transfer, it can be set with fast or slow.
We also added three new optional parameters for run_tests, and dropped
run_remove_tests function.
Since we added the netfilter rules in this test case, we need to update
the "config" file.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we have *,G ports in exclude mode and a new S,G,port is added
the kernel has to automatically create an S,G entry for each exclude
port to get proper forwarding.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that when a group in exclude mode expires it changes mode to
include and the blocked entries are deleted.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) BLOCK (A) EXCLUDE (X+(A-Y),Y) (A-X-Y) =
Filter Timer
Send Q(MA,A-Y)
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) BLOCK (B) INCLUDE (A) Send Q(MA,A*B)
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y) =
Filter Timer
Delete (X-A)
Delete (Y-A)
Send Q(MA,A-Y)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) IS_EX (A) EXCLUDE (A-Y, Y*A) (A-X-Y)=MALI
Delete (X-A)
Delete (Y-A)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) IS_IN (A) EXCLUDE (X+A, Y-A) (A)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) ALLOW (A) EXCLUDE (X+A,Y-A) (A)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) TO_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B)
Send Q(MA,A*B)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) IS_EX (B) EXCLUDE (A*B, B-A) (B-A)=0
Delete (A-B)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the initial setup for MLDv2 tests with the first test of a simple
is_include report. For MLDv2 we need to setup the bridge properly and we
also send the full precooked packets instead of relying on mausezahn to
fill in some parts. For verification we use the generic S,G state checking
functions from lib.sh.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out S,G entry state checking functions for existence, forwarding,
blocking and timer to lib.sh so they can be later used by MLDv2 tests.
Add brmcast_ suffix to their name to make the relation to the bridge
explicit.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to test an IPv6 multicast packet we need to pass different tc
and mausezahn protocols only, so add a simple check for the destination
address which decides if we should generate an IPv4 or IPv6 mcast
packet.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out mcast_packet_test into lib.sh so it can be later extended and
reused by MLDv2 tests.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a possible use after free in xsk_socket__delete that will happen
if xsk_put_ctx() frees the ctx. To fix, save the umem reference taken
from the context and just use that instead.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1604396490-12129-3-git-send-email-magnus.karlsson@gmail.com
Fix a possible null pointer dereference in xsk_socket__delete that
will occur if a null pointer is fed into the function.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1604396490-12129-2-git-send-email-magnus.karlsson@gmail.com
Use global variables instead of global_map and sockopt_results_map to track
test data. Doing this greatly simplifies the code as there is not need to
take the extra steps of updating the maps or looking up elements.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/160443931900.1086697.6588858453575682351.stgit@localhost.localdomain
Update tcpbpf_user.c to make use of the BPF skeleton. Doing this we can
simplify test_tcpbpf_user and reduce the overhead involved in setting up
the test.
In addition we can clean up the remaining bits such as the one remaining
CHECK_FAIL at the end of test_tcpbpf_user so that the function only makes
use of CHECK as needed.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/160443931155.1086697.17869006617113525162.stgit@localhost.localdomain
There is already logic in test_progs.h for asserting that a value is
expected to be another value. So instead of reinventing it we should just
make use of ASSERT_EQ in tcpbpf_user.c. This will allow for better
debugging and integrates much more closely with the test_progs framework.
In addition we can refactor the code a bit to merge together the two
verify functions and tie them together into a single function. Doing this
helps to clean the code up a bit and makes it more readable as all the
verification is now done in one function.
Lastly we can relocate the verification to the end of the run_test since it
is logically part of the test itself. With this we can drop the need for a
return value from run_test since verification becomes the last step of the
call and then immediately following is the tear down of the test setup.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/160443930408.1086697.16101205859962113000.stgit@localhost.localdomain
Drop the tcp_client/server.py files in favor of using a client and server
thread within the test case. Specifically we spawn a new thread to play the
role of the server, and the main testing thread plays the role of client.
Add logic to the end of the run_test function to guarantee that the sockets
are closed when we begin verifying results.
Doing this we are able to reduce overhead since we don't have two python
workers possibly floating around. In addition we don't have to worry about
synchronization issues and as such the retry loop waiting for the threads
to close the sockets can be dropped as we will have already closed the
sockets in the local executable and synchronized the server thread.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160443929638.1086697.2430242340980315521.stgit@localhost.localdomain
Recently a bug was missed due to the fact that test_tcpbpf_user is not a
part of test_progs. In order to prevent similar issues in the future move
the test functionality into test_progs. By doing this we can make certain
that it is a part of standard testing and will not be overlooked.
As a part of moving the functionality into test_progs it is necessary to
integrate with the test_progs framework and to drop any redundant code.
This patch:
1. Cleans up the include headers
2. Dropped a duplicate definition of bpf_find_map
3. Switched over to using test_progs specific cgroup functions
4. Renamed main to test_tcpbpf_user
5. Dropped return value in favor of CHECK_FAIL to check for errors
The general idea is that I wanted to keep the changes as small as possible
while moving the file into the test_progs framework. The follow-on patches
are meant to clean up the remaining issues such as the use of CHECK_FAIL.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/160443928881.1086697.17661359319919165370.stgit@localhost.localdomain
- Fix visibility attribute in python module init code with newer gcc.
- Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event files.
- Fix the build on new fedora by removing LTO compiler options when
building perl support.
- Remove broken __no_tail_call attribute.
- Fix segfault when trying to trace events by cgroup.
- Fix crash with non-jited BPF progs.
- Increase buffer size in TUI browser, fixing format truncation.
- Fix printing of build-id for objects lacking one.
- Fix byte swapping for ino_generation field in MMAP2 perf.data records.
- Fix byte swapping for CGROUP perf.data records, for cross arch
analysis of perf.data files.
- Fix the fast path of feature detection.
- Update kernel header copies.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
$ export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc2.tar.xz
# dm
1 86.33 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 105.30 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 92.97 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 102.42 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 74.82 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 80.90 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 94.76 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 108.65 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 99.57 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 105.71 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 64.48 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 79.07 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 75.88 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 21.77 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
15 21.07 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
16 11.56 centos:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
In file included from util/bpf-loader.h:11,
from builtin-record.c:39:
/git/linux/tools/lib/bpf/libbpf.h:203: error: wrong number of arguments specified for 'deprecated' attribute
17 30.56 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
18 103.81 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
19 55.87 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201022 releases/gcc-10.2.0-423-g523e6e5bd4, clang version 10.0.1
20 69.63 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
21 73.47 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
22 69.11 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
23 73.16 debian:experimental : Ok gcc (Debian 10.2.0-15) 10.2.0, Debian clang version 11.0.0-3
24 28.77 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
25 28.47 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
26 29.00 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
27 64.28 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
28 73.58 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
29 25.26 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
30 74.19 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
31 85.77 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
32 85.91 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
33 95.26 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
34 101.02 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
35 102.27 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
36 24.61 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
37 101.92 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
38 86.42 fedora:32 : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
39 86.30 fedora:33 : Ok gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
40 86.91 fedora:rawhide : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 11.0.0 (Fedora 11.0.0-2.fc34)
41 33.35 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
42 64.86 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
43 79.26 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
44 319.23 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang e49ac65e101d9c5056eb545360b8bd05ff47cd0b)
45 109.02 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
46 114.37 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
47 105.37 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
48 99.00 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
49 100.28 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
50 11.06 oraclelinux:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
In file included from util/bpf-loader.h:11,
from builtin-record.c:39:
/git/linux/tools/lib/bpf/libbpf.h:203: error: wrong number of arguments specified for 'deprecated' attribute
51 29.40 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
52 102.98 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
53 25.77 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
54 29.06 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
55 72.21 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
56 25.27 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
57 25.62 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
58 24.79 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
59 25.37 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
60 24.87 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
61 24.87 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
62 82.58 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
63 26.97 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
64 27.10 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
65 22.00 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
66 25.69 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
67 28.57 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
68 28.67 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
69 157.32 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
70 24.17 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
71 25.90 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 23.71 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 64.79 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
74 26.17 ubuntu:19.10-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
75 23.59 ubuntu:19.10-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
76 68.50 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
77 29.56 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
78 69.18 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
$
# uname -a
Linux quaco 5.8.14-200.fc32.x86_64 #1 SMP Wed Oct 7 14:47:56 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
5d020cbd86 tools feature: Fixup fast path feature detection
# perf version --build-options
perf version 5.10.rc2.g5d020cbd8620
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Skip (some metrics failed)
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: PE file support : Ok
69: Event expansion for cgroups : Ok
70: x86 rdpmc : Ok
71: Convert perf time to TSC : Ok
72: DWARF unwind : Ok
73: x86 instruction decoder - new instructions : Ok
74: Intel PT packet decoder : Ok
75: x86 bp modify : Ok
76: probe libc's inet_pton & backtrace it with ping : Ok
77: Use vfs_getname probe to get syscall args filenames : Ok
78: Check Arm CoreSight trace data recording and synthesized samples: Skip
79: build id cache operations : Ok
80: Add vfs_getname probe to get syscall args filenames : Ok
81: Check open filename arg using perf trace + vfs_getname : Ok
82: Zstd perf.data compression/decompression : Ok
#
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libpython_O: make NO_LIBPYTHON=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_gtk2_O: make NO_GTK2=1
make_doc_O: make doc
make_install_bin_O: make install-bin
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_pure_O: make
make_install_O: make install
make_no_sdt_O: make NO_SDT=1
make_no_newt_O: make NO_NEWT=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_libperl_O: make NO_LIBPERL=1
make_with_gtk2_O: make GTK2=1
make_no_slang_O: make NO_SLANG=1
make_no_libbpf_O: make NO_LIBBPF=1
make_clean_all_O: make clean all
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_tags_O: make tags
make_no_libunwind_O: make NO_LIBUNWIND=1
make_perf_o_O: make perf.o
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_demangle_O: make NO_DEMANGLE=1
make_with_libpfm4_O: make LIBPFM4=1
make_no_libbionic_O: make NO_LIBBIONIC=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_install_prefix_O: make install prefix=/tmp/krava
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_libelf_O: make NO_LIBELF=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_debug_O: make DEBUG=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_util_map_o_O: make util/map.o
make_help_O: make help
make_no_auxtrace_O: make NO_AUXTRACE=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCX6GwUwAKCRCyPKLppCJ+
J4SUAQDN5umkhvaAQIau+VTlFI9xm0AdVAZWPdXWunPU4qafqgEAjApNlJDHsv0p
D0aHj+Yq0wfYnsd7BuuCsqgunAfI1wg=
=n9o9
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Only fixes and a sync of the headers so that the perf build is silent:
- Fix visibility attribute in python module init code with newer gcc
- Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event
files
- Fix the build on new fedora by removing LTO compiler options when
building perl support
- Remove broken __no_tail_call attribute
- Fix segfault when trying to trace events by cgroup
- Fix crash with non-jited BPF progs
- Increase buffer size in TUI browser, fixing format truncation
- Fix printing of build-id for objects lacking one
- Fix byte swapping for ino_generation field in MMAP2 perf.data
records
- Fix byte swapping for CGROUP perf.data records, for cross arch
analysis of perf.data files
- Fix the fast path of feature detection
- Update kernel header copies"
* tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools feature: Fixup fast path feature detection
perf tools: Add missing swap for cgroup events
perf tools: Add missing swap for ino_generation
perf tools: Initialize output buffer in build_id__sprintf
perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()
tools include UAPI: Update linux/mount.h copy
tools headers UAPI: Update tools's copy of linux/perf_event.h
tools kvm headers: Update KVM headers from the kernel sources
tools UAPI: Update copy of linux/mman.h from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools x86 headers: Update required-features.h header from the kernel
tools x86 headers: Update cpufeatures.h headers copies
tools headers UAPI: Update fscrypt.h copy
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync prctl.h with the kernel sources
perf scripting python: Avoid declaring function pointers with a visibility attribute
perf tools: Remove broken __no_tail_call attribute
perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX
perf trace: Fix segfault when trying to trace events by cgroup
perf tools: Fix crash with non-jited bpf progs
...
number of warnings from the once-noisy docs build process is nearly zero.
Getting to this point has required a lot of work; once there, hopefully we
can keep things that way.
I have packaged this as a separate pull because it does a fair amount of
reaching outside of Documentation/. The changes are all in comments and in
code placement. It's all been in linux-next since last week.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+hscQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgZAH/0JeDA/1VLZYYTmdABz8mjBZsoW9tyPGGztF
nsh5ykdHhL3MeTRwumW5armLVrfKhd1XT+nIzD7OcWlqu+RDOvQ5I95rahr473hP
1SHTjqm3/AlJwQoeS72X5U6QEJQ58e2IwCbP23H3x7I3Q3snEA/HhswzxurfoB/Z
j81YzDV2YPEc0LJWZ5Vn0NEdwP8cdpFv5rojsQmepq7K0yJ7tEHb7/u2cEuUBgXS
8LcYCNPLpiN+q5N8uQ5oDjIUNdLQvP03kgKtQWiCTr4BRydOrDlJie28LIedamEz
anu7UfaVK4bxn+ugRI0g2+aWQKux81ULCinKUWmLRNbcxjhaQqQ=
=hDfp
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
22dd1ac91a ("tools: Remove feature-libelf-mmap feature detection")
correctly simplified the this feature detection, but forgot to remove
the call to the removed function in the main() function for the
test-all.c fast path feature detection, making it fail and thus do all
the feature detection individually, fix it.
$ cat /tmp/build/perf/feature/test-all.make.output
test-all.c: In function ‘main’:
test-all.c:188:2: error: implicit declaration of function ‘main_test_libelf_mmap’; did you mean ‘main_test_libelf’? [-Werror=implicit-function-declaration]
188 | main_test_libelf_mmap();
| ^~~~~~~~~~~~~~~~~~~~~
| main_test_libelf
cc1: all warnings being treated as errors
$ vim tools/build/feature/test-all.c
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;make V=1 -k O=/tmp/build/perf -C tools/perf install-bin ; perf test python
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
$
Fixes: 22dd1ac91a ("tools: Remove feature-libelf-mmap feature detection")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was missed to add a swap function for PERF_RECORD_CGROUP.
Fixes: ba78c1c546 ("perf tools: Basic support for CGROUP event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201102140228.303657-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are missing swap for ino_generation field.
Fixes: 5c5e854bc7 ("perf tools: Add attr->mmap2 support")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We display garbage for undefined build_id objects, because we don't
initialize the output buffer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making perf with gcc-9.1.1 generates the following warning:
CC ui/browsers/hists.o
ui/browsers/hists.c: In function 'perf_evsel__hists_browse':
ui/browsers/hists.c:3078:61: error: '%d' directive output may be \
truncated writing between 1 and 11 bytes into a region of size \
between 2 and 12 [-Werror=format-truncation=]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~
ui/browsers/hists.c:3078:7: note: directive argument in the range [-2147483648, 8]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:937,
from ui/browsers/hists.c:5:
IOW, the string in line 3078 might be too long for buf[] of 64 bytes.
Fix this by increasing the size of buf[] to 128.
Fixes: dbddf17474 ("perf report/top TUI: Support hotkeys to let user select any event for sorting")
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: stable@vger.kernel.org # v5.7+
Link: http://lore.kernel.org/lkml/20201030235431.534417-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
dab741e0e0 ("Add a "nosymfollow" mount option.")
That ends up adding support for the new MS_NOSYMFOLLOW mount flag:
$ tools/perf/trace/beauty/mount_flags.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/mount_flags.sh > after
$ diff -u before after
--- before 2020-11-03 08:51:28.117997454 -0300
+++ after 2020-11-03 08:51:38.992218869 -0300
@@ -7,6 +7,7 @@
[32 ? (ilog2(32) + 1) : 0] = "REMOUNT",
[64 ? (ilog2(64) + 1) : 0] = "MANDLOCK",
[128 ? (ilog2(128) + 1) : 0] = "DIRSYNC",
+ [256 ? (ilog2(256) + 1) : 0] = "NOSYMFOLLOW",
[1024 ? (ilog2(1024) + 1) : 0] = "NOATIME",
[2048 ? (ilog2(2048) + 1) : 0] = "NODIRATIME",
[4096 ? (ilog2(4096) + 1) : 0] = "BIND",
$
So now one can use it in --filter expressions for tracepoints.
This silences this perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The diff is just tabs versus spaces, trivial.
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ido Schimmel