This is a quick patch to add a new xfs_attr_*_return tracepoints. We
use these to track when ever a new state is set or -EAGAIN is returned
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Hoist the code from xfs_bui_item_recover that igets an inode and marks
it as being part of log intent recovery. The next patch will want a
common function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
When there are no ongoing transactions and the log contents have been
checkpointed back into the filesystem, the log performs 'covering',
which is to say that it log a dummy transaction to record the fact that
the tail has caught up with the head. This is a good time to clear log
incompat feature flags, because they are flags that are temporarily set
to limit the range of kernels that can replay a dirty log.
Since it's possible that some other higher level thread is about to
start logging items protected by a log incompat flag, we create a rwsem
so that upper level threads can coordinate this with the log. It would
probably be more performant to use a percpu rwsem, but the ability to
/try/ taking the write lock during covering is critical, and percpu
rwsems do not provide that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Log incompat feature flags in the superblock exist for one purpose: to
protect the contents of a dirty log from replay on a kernel that isn't
prepared to handle those dirty contents. This means that they can be
cleared if (a) we know the log is clean and (b) we know that there
aren't any other threads in the system that might be setting or relying
upon a log incompat flag.
Therefore, clear the log incompat flags when we've finished recovering
the log, when we're unmounting cleanly, remounting read-only, or
freezing; and provide a function so that subsequent patches can start
using this.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
There is no reason for this wrapper existing anymore. All the places
that use KM_NOFS allocation are within transaction contexts and
hence covered by memalloc_nofs_save/restore contexts. Hence we don't
need any special handling of vmalloc for large IOs anymore and
so special casing this code isn't necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Since commit 59bb47985c ("mm, sl[aou]b: guarantee natural alignment
for kmalloc(power-of-two)"), the core slab code now guarantees slab
alignment in all situations sufficient for IO purposes (i.e. minimum
of 512 byte alignment of >= 512 byte sized heap allocations) we no
longer need the workaround in the XFS code to provide this
guarantee.
Replace the use of kmem_alloc_io() with kmem_alloc() or
kmem_alloc_large() appropriately, and remove the kmem_alloc_io()
interface altogether.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
During log recovery of an XFS filesystem with 64kB directory
buffers, rebuilding a buffer split across two log records results
in a memory allocation warning from krealloc like this:
xfs filesystem being mounted at /mnt/scratch supports timestamps until 2038 (0x7fffffff)
XFS (dm-0): Unmounting Filesystem
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
------------[ cut here ]------------
WARNING: CPU: 5 PID: 3435170 at mm/page_alloc.c:3539 get_page_from_freelist+0xdee/0xe40
.....
RIP: 0010:get_page_from_freelist+0xdee/0xe40
Call Trace:
? complete+0x3f/0x50
__alloc_pages+0x16f/0x300
alloc_pages+0x87/0x110
kmalloc_order+0x2c/0x90
kmalloc_order_trace+0x1d/0x90
__kmalloc_track_caller+0x215/0x270
? xlog_recover_add_to_cont_trans+0x63/0x1f0
krealloc+0x54/0xb0
xlog_recover_add_to_cont_trans+0x63/0x1f0
xlog_recovery_process_trans+0xc1/0xd0
xlog_recover_process_ophdr+0x86/0x130
xlog_recover_process_data+0x9f/0x160
xlog_recover_process+0xa2/0x120
xlog_do_recovery_pass+0x40b/0x7d0
? __irq_work_queue_local+0x4f/0x60
? irq_work_queue+0x3a/0x50
xlog_do_log_recovery+0x70/0x150
xlog_do_recover+0x38/0x1d0
xlog_recover+0xd8/0x170
xfs_log_mount+0x181/0x300
xfs_mountfs+0x4a1/0x9b0
xfs_fs_fill_super+0x3c0/0x7b0
get_tree_bdev+0x171/0x270
? suffix_kstrtoint.constprop.0+0xf0/0xf0
xfs_fs_get_tree+0x15/0x20
vfs_get_tree+0x24/0xc0
path_mount+0x2f5/0xaf0
__x64_sys_mount+0x108/0x140
do_syscall_64+0x3a/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Essentially, we are taking a multi-order allocation from kmem_alloc()
(which has an open coded no fail, no warn loop) and then
reallocating it out to 64kB using krealloc(__GFP_NOFAIL) and that is
then triggering the above warning.
This is a regression caused by converting this code from an open
coded no fail/no warn reallocation loop to using __GFP_NOFAIL.
What we actually need here is kvrealloc(), so that if contiguous
page allocation fails we fall back to vmalloc() and we don't
get nasty warnings happening in XFS.
Fixes: 771915c4f6 ("xfs: remove kmem_realloc()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If we try to recover a log intent item and the operation fails due to
filesystem corruption, dump the contents of the item to the log for
further analysis.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch prepares scrub to deal with the possibility of tearing down
entire AGs by changing the order of resource acquisition to match the
rest of the XFS codebase. In other words, scrub now grabs AG resources
in order of: perag structure, then AGI/AGF/AGFL buffers, then btree
cursors; and releases them in reverse order.
This requires us to distinguish xchk_ag_init callers -- some are
responding to a user request to check AG metadata, in which case we can
return ENOENT to userspace; but other callers have an ondisk reference
to an AG that they're trying to cross-reference. In this second case,
the lack of an AG means there's ondisk corruption, since ondisk metadata
cannot point into nonexistent space.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
These two features were merged a year ago, userspace tooling have been
merged, and no serious errors have been reported by the developers.
Drop the experimental tag to encourage wider testing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix a few whitespace errors such as spaces at the end of the line, etc.
This gets us back to something more closely resembling parity.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we defer inode inactivation, we've decoupled the process of
unlinking or closing an inode from the process of inactivating it. In
theory this should lead to better throughput since we now inactivate the
queued inodes in batches instead of one at a time.
Unfortunately, one of the primary risks with this decoupling is the loss
of rate control feedback between the frontend and background threads.
In other words, a rm -rf /* thread can run the system out of memory if
it can queue inodes for inactivation and jump to a new CPU faster than
the background threads can actually clear the deferred work. The
workers can get scheduled off the CPU if they have to do IO, etc.
To solve this problem, we configure a shrinker so that it will activate
the /second/ time the shrinkers are called. The custom shrinker will
queue all percpu deferred inactivation workers immediately and set a
flag to force frontend callers who are releasing a vfs inode to wait for
the inactivation workers.
On my test VM with 560M of RAM and a 2TB filesystem, this seems to solve
most of the OOMing problem when deleting 10 million inodes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When we're servicing an INUMBERS or BULKSTAT request or running
quotacheck, grab an empty transaction so that we can use its inherent
recursive buffer locking abilities to detect inode btree cycles without
hitting ABBA buffer deadlocks. This patch requires the deferred inode
inactivation patchset because xfs_irele cannot directly call
xfs_inactive when the iwalk itself has an (empty) transaction.
Found by fuzzing an inode btree pointer to introduce a cycle into the
tree (xfs/365).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_trans_alloc, if the block reservation call returns ENOSPC, we
call xfs_blockgc_free_space with a NULL icwalk structure to try to free
space. Each frontend thread that encounters this situation starts its
own walk of the inode cache to see if it can find anything, which is
wasteful since we don't have any additional selection criteria. For
this one common case, create a function that reschedules all pending
background work immediately and flushes the workqueue so that the scan
can run in parallel.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Just retrieve the bdi from the disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have the infrastructure to switch background workers on and
off at will, fix the block gc worker code so that we don't actually run
the worker when the filesystem is frozen, same as we do for deferred
inactivation.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Users have come to expect that the space accounting information in
statfs and getquota reports are fairly accurate. Now that we inactivate
inodes from a background queue, these numbers can be thrown off by
whatever resources are singly-owned by the inodes in the queue. Flush
the pending inactivations when userspace asks for a space usage report.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Other parts of XFS have learned to call xfs_blockgc_free_{space,quota}
to try to free speculative preallocations when space is tight. This
means that file writes, transaction reservation failures, quota limit
enforcement, and the EOFBLOCKS ioctl all call this function to free
space when things are tight.
Since inode inactivation is now a background task, this means that the
filesystem can be hanging on to unlinked but not yet freed space. Add
this to the list of things that xfs_blockgc_free_* makes writer threads
scan for when they cannot reserve space.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we have made the inactivation of unlinked inodes a background
task to increase the throughput of file deletions, we need to be a
little more careful about how long of a delay we can tolerate.
Similar to the patch doing this for free space on the data device, if
the file being inactivated is a realtime file and the realtime volume is
running low on free extents, we want to run the worker ASAP so that the
realtime allocator can make better decisions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we have made the inactivation of unlinked inodes a background
task to increase the throughput of file deletions, we need to be a
little more careful about how long of a delay we can tolerate.
Specifically, if the dquots attached to the inode being inactivated are
nearing any kind of enforcement boundary, we want to queue that
inactivation work immediately so that users don't get EDQUOT/ENOSPC
errors even after they deleted a bunch of files to stay within quota.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we have made the inactivation of unlinked inodes a background
task to increase the throughput of file deletions, we need to be a
little more careful about how long of a delay we can tolerate.
On a mostly empty filesystem, the risk of the allocator making poor
decisions due to fragmentation of the free space on account a lengthy
delay in background updates is minimal because there's plenty of space.
However, if free space is tight, we want to deallocate unlinked inodes
as quickly as possible to avoid fallocate ENOSPC and to give the
allocator the best shot at optimal allocations for new writes.
Therefore, queue the percpu worker immediately if the filesystem is more
than 95% full. This follows the same principle that XFS becomes less
aggressive about speculative allocations and lazy cleanup (and more
precise about accounting) when nearing full.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Move inode inactivation to background work contexts so that it no
longer runs in the context that releases the final reference to an
inode. This will allow process work that ends up blocking on
inactivation to continue doing work while the filesytem processes
the inactivation in the background.
A typical demonstration of this is unlinking an inode with lots of
extents. The extents are removed during inactivation, so this blocks
the process that unlinked the inode from the directory structure. By
moving the inactivation to the background process, the userspace
applicaiton can keep working (e.g. unlinking the next inode in the
directory) while the inactivation work on the previous inode is
done by a different CPU.
The implementation of the queue is relatively simple. We use a
per-cpu lockless linked list (llist) to queue inodes for
inactivation without requiring serialisation mechanisms, and a work
item to allow the queue to be processed by a CPU bound worker
thread. We also keep a count of the queue depth so that we can
trigger work after a number of deferred inactivations have been
queued.
The use of a bound workqueue with a single work depth allows the
workqueue to run one work item per CPU. We queue the work item on
the CPU we are currently running on, and so this essentially gives
us affine per-cpu worker threads for the per-cpu queues. THis
maintains the effective CPU affinity that occurs within XFS at the
AG level due to all objects in a directory being local to an AG.
Hence inactivation work tends to run on the same CPU that last
accessed all the objects that inactivation accesses and this
maintains hot CPU caches for unlink workloads.
A depth of 32 inodes was chosen to match the number of inodes in an
inode cluster buffer. This hopefully allows sequential
allocation/unlink behaviours to defering inactivation of all the
inodes in a single cluster buffer at a time, further helping
maintain hot CPU and buffer cache accesses while running
inactivations.
A hard per-cpu queue throttle of 256 inode has been set to avoid
runaway queuing when inodes that take a long to time inactivate are
being processed. For example, when unlinking inodes with large
numbers of extents that can take a lot of processing to free.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: tweak comments and tracepoints, convert opflags to state bits]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If we don't need to inactivate an inode, we can detach the dquots and
move on to reclamation. This isn't strictly required here; it's a
preparation patch for deferred inactivation per reviewer request[1] to
move the creation of xfs_inode_needs_inactivation into a separate
change. Eventually this !need_inactive chunk will turn into the code
path for inodes that skip xfs_inactive and go straight to memory
reclaim.
[1] https://lore.kernel.org/linux-xfs/20210609012838.GW2945738@locust/T/#mca6d958521cb88bbc1bfe1a30767203328d410b5
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Move the xfs_inactive call and all the other debugging checks and stats
updates into xfs_inode_mark_reclaimable because most of that are
implementation details about the inode cache. This is preparation for
deferred inactivation that is coming up. We also move it around
xfs_icache.c in preparation for deferred inactivation.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The inode inactivation and CIL tracking percpu structures are
per-xfs_mount structures. That means when we get a CPU dead
notification, we need to then iterate all the per-cpu structure
instances to process them. Rather than keeping linked lists of
per-cpu structures in each subsystem, add a list of all xfs_mounts
that the generic xfs_cpu_dead() function will iterate and call into
each subsystem appropriately.
This allows us to handle both per-mount and global XFS percpu state
from xfs_cpu_dead(), and avoids the need to link subsystem
structures that can be easily found from the xfs_mount into their
own global lists.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: expand some comments about mount list setup ordering rules]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We need to move to per-cpu state for both deferred inode
inactivation and CIL tracking, but to do that we
need to handle CPUs being removed from the system by the hot-plug
code. Introduce generic XFS infrastructure to handle CPU hotplug
events that is set up at module init time and torn down at module
exit time.
Initially, we only need CPU dead notifications, so we only set
up a callback for these notifications. The infrastructure can be
updated in future for other CPU hotplug state machine notifications
easily if ever needed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: rearrange some macros, fix function prototypes]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
These only made a difference when quotaoff supported disabling quota
accounting on a mounted file system, so we can switch everyone to use
a single set of flags and helpers now. Note that the *QUOTA_ON naming
for the helpers is kept as it was the much more commonly used one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We always purge all dquots now, so drop the argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_dqrele_all_inodes is unused now, remove it and all supporting code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Disabling quota accounting is hairy, racy code with all kinds of pitfalls.
And it has a very strange mind set, as quota accounting (unlike
enforcement) really is a propery of the on-disk format. There is no good
use case for supporting this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* Fix a number of coordination bugs relating to cache flushes for
metadata writeback, cache flushes for multi-buffer log writes, and
FUA writes for single-buffer log writes.
* Fix a bug with incorrect replay of attr3 blocks.
* Fix unnecessary stalls when flushing logs to disk.
* Fix spoofing problems when recovering realtime bitmap blocks.
-----BEGIN PGP SIGNATURE-----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=pLW3
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This contains a bunch of bug fixes in XFS.
Dave and I have been busy the last couple of weeks to find and fix as
many log recovery bugs as we can find; here are the results so far. Go
fstests -g recoveryloop! ;)
- Fix a number of coordination bugs relating to cache flushes for
metadata writeback, cache flushes for multi-buffer log writes, and
FUA writes for single-buffer log writes
- Fix a bug with incorrect replay of attr3 blocks
- Fix unnecessary stalls when flushing logs to disk
- Fix spoofing problems when recovering realtime bitmap blocks"
* tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: prevent spoofing of rtbitmap blocks when recovering buffers
xfs: limit iclog tail updates
xfs: need to see iclog flags in tracing
xfs: Enforce attr3 buffer recovery order
xfs: logging the on disk inode LSN can make it go backwards
xfs: avoid unnecessary waits in xfs_log_force_lsn()
xfs: log forces imply data device cache flushes
xfs: factor out forced iclog flushes
xfs: fix ordering violation between cache flushes and tail updates
xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog
xfs: external logs need to flush data device
xfs: flush data dev on external log write
While reviewing the buffer item recovery code, the thought occurred to
me: in V5 filesystems we use log sequence number (LSN) tracking to avoid
replaying older metadata updates against newer log items. However, we
use the magic number of the ondisk buffer to find the LSN of the ondisk
metadata, which means that if an attacker can control the layout of the
realtime device precisely enough that the start of an rt bitmap block
matches the magic and UUID of some other kind of block, they can control
the purported LSN of that spoofed block and thereby break log replay.
Since realtime bitmap and summary blocks don't have headers at all, we
have no way to tell if a block really should be replayed. The best we
can do is replay unconditionally and hope for the best.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
From the department of "generic/482 keeps on giving", we bring you
another tail update race condition:
iclog:
S1 C1
+-----------------------+-----------------------+
S2 EOIC
Two checkpoints in a single iclog. One is complete, the other just
contains the start record and overruns into a new iclog.
Timeline:
Before S1: Cache flush, log tail = X
At S1: Metadata stable, write start record and checkpoint
At C1: Write commit record, set NEED_FUA
Single iclog checkpoint, so no need for NEED_FLUSH
Log tail still = X, so no need for NEED_FLUSH
After C1,
Before S2: Cache flush, log tail = X
At S2: Metadata stable, write start record and checkpoint
After S2: Log tail moves to X+1
At EOIC: End of iclog, more journal data to write
Releases iclog
Not a commit iclog, so no need for NEED_FLUSH
Writes log tail X+1 into iclog.
At this point, the iclog has tail X+1 and NEED_FUA set. There has
been no cache flush for the metadata between X and X+1, and the
iclog writes the new tail permanently to the log. THis is sufficient
to violate on disk metadata/journal ordering.
We have two options here. The first is to detect this case in some
manner and ensure that the partial checkpoint write sets NEED_FLUSH
when the iclog is already marked NEED_FUA and the log tail changes.
This seems somewhat fragile and quite complex to get right, and it
doesn't actually make it obvious what underlying problem it is
actually addressing from reading the code.
The second option seems much cleaner to me, because it is derived
directly from the requirements of the C1 commit record in the iclog.
That is, when we write this commit record to the iclog, we've
guaranteed that the metadata/data ordering is correct for tail
update purposes. Hence if we only write the log tail into the iclog
for the *first* commit record rather than the log tail at the last
release, we guarantee that the log tail does not move past where the
the first commit record in the log expects it to be.
IOWs, taking the first option means that replay of C1 becomes
dependent on future operations doing the right thing, not just the
C1 checkpoint itself doing the right thing. This makes log recovery
almost impossible to reason about because now we have to take into
account what might or might not have happened in the future when
looking at checkpoints in the log rather than just having to
reconstruct the past...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Because I cannot tell if the NEED_FLUSH flag is being set correctly
by the log force and CIL push machinery without it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
From the department of "WTAF? How did we miss that!?"...
When we are recovering a buffer, the first thing we do is check the
buffer magic number and extract the LSN from the buffer. If the LSN
is older than the current LSN, we replay the modification to it. If
the metadata on disk is newer than the transaction in the log, we
skip it. This is a fundamental v5 filesystem metadata recovery
behaviour.
generic/482 failed with an attribute writeback failure during log
recovery. The write verifier caught the corruption before it got
written to disk, and the attr buffer dump looked like:
XFS (dm-3): Metadata corruption detected at xfs_attr3_leaf_verify+0x275/0x2e0, xfs_attr3_leaf block 0x19be8
XFS (dm-3): Unmount and run xfs_repair
XFS (dm-3): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3b ee 00 00 4d 2a 01 e1 ........;...M*..
00000010: 00 00 00 00 00 01 9b e8 00 00 00 01 00 00 05 38 ...............8
^^^^^^^^^^^^^^^^^^^^^^^
00000020: df 39 5e 51 58 ac 44 b6 8d c5 e7 10 44 09 bc 17 .9^QX.D.....D...
00000030: 00 00 00 00 00 02 00 83 00 03 00 cc 0f 24 01 00 .............$..
00000040: 00 68 0e bc 0f c8 00 10 00 00 00 00 00 00 00 00 .h..............
00000050: 00 00 3c 31 0f 24 01 00 00 00 3c 32 0f 88 01 00 ..<1.$....<2....
00000060: 00 00 3c 33 0f d8 01 00 00 00 00 00 00 00 00 00 ..<3............
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
.....
The highlighted bytes are the LSN that was replayed into the
buffer: 0x100000538. This is cycle 1, block 0x538. Prior to replay,
that block on disk looks like this:
$ sudo xfs_db -c "fsb 0x417d" -c "type attr3" -c p /dev/mapper/thin-vol
hdr.info.hdr.forw = 0
hdr.info.hdr.back = 0
hdr.info.hdr.magic = 0x3bee
hdr.info.crc = 0xb5af0bc6 (correct)
hdr.info.bno = 105448
hdr.info.lsn = 0x100000900
^^^^^^^^^^^
hdr.info.uuid = df395e51-58ac-44b6-8dc5-e7104409bc17
hdr.info.owner = 131203
hdr.count = 2
hdr.usedbytes = 120
hdr.firstused = 3796
hdr.holes = 1
hdr.freemap[0-2] = [base,size]
Note the LSN stamped into the buffer on disk: 1/0x900. The version
on disk is much newer than the log transaction that was being
replayed. That's a bug, and should -never- happen.
So I immediately went to look at xlog_recover_get_buf_lsn() to check
that we handled the LSN correctly. I was wondering if there was a
similar "two commits with the same start LSN skips the second
replay" problem with buffers. I didn't get that far, because I found
a much more basic, rudimentary bug: xlog_recover_get_buf_lsn()
doesn't recognise buffers with XFS_ATTR3_LEAF_MAGIC set in them!!!
IOWs, attr3 leaf buffers fall through the magic number checks
unrecognised, so trigger the "recover immediately" behaviour instead
of undergoing an LSN check. IOWs, we incorrectly replay ATTR3 leaf
buffers and that causes silent on disk corruption of inode attribute
forks and potentially other things....
Git history shows this is *another* zero day bug, this time
introduced in commit 50d5c8d8e9 ("xfs: check LSN ordering for v5
superblocks during recovery") which failed to handle the attr3 leaf
buffers in recovery. And we've failed to handle them ever since...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
When we log an inode, we format the "log inode" core and set an LSN
in that inode core. We do that via xfs_inode_item_format_core(),
which calls:
xfs_inode_to_log_dinode(ip, dic, ip->i_itemp->ili_item.li_lsn);
to format the log inode. It writes the LSN from the inode item into
the log inode, and if recovery decides the inode item needs to be
replayed, it recovers the log inode LSN field and writes it into the
on disk inode LSN field.
Now this might seem like a reasonable thing to do, but it is wrong
on multiple levels. Firstly, if the item is not yet in the AIL,
item->li_lsn is zero. i.e. the first time the inode it is logged and
formatted, the LSN we write into the log inode will be zero. If we
only log it once, recovery will run and can write this zero LSN into
the inode.
This means that the next time the inode is logged and log recovery
runs, it will *always* replay changes to the inode regardless of
whether the inode is newer on disk than the version in the log and
that violates the entire purpose of recording the LSN in the inode
at writeback time (i.e. to stop it going backwards in time on disk
during recovery).
Secondly, if we commit the CIL to the journal so the inode item
moves to the AIL, and then relog the inode, the LSN that gets
stamped into the log inode will be the LSN of the inode's current
location in the AIL, not it's age on disk. And it's not the LSN that
will be associated with the current change. That means when log
recovery replays this inode item, the LSN that ends up on disk is
the LSN for the previous changes in the log, not the current
changes being replayed. IOWs, after recovery the LSN on disk is not
in sync with the LSN of the modifications that were replayed into
the inode. This, again, violates the recovery ordering semantics
that on-disk writeback LSNs provide.
Hence the inode LSN in the log dinode is -always- invalid.
Thirdly, recovery actually has the LSN of the log transaction it is
replaying right at hand - it uses it to determine if it should
replay the inode by comparing it to the on-disk inode's LSN. But it
doesn't use that LSN to stamp the LSN into the inode which will be
written back when the transaction is fully replayed. It uses the one
in the log dinode, which we know is always going to be incorrect.
Looking back at the change history, the inode logging was broken by
commit 93f958f9c4 ("xfs: cull unnecessary icdinode fields") way
back in 2016 by a stupid idiot who thought he knew how this code
worked. i.e. me. That commit replaced an in memory di_lsn field that
was updated only at inode writeback time from the inode item.li_lsn
value - and hence always contained the same LSN that appeared in the
on-disk inode - with a read of the inode item LSN at inode format
time. CLearly these are not the same thing.
Before 93f958f9c4, the log recovery behaviour was irrelevant,
because the LSN in the log inode always matched the on-disk LSN at
the time the inode was logged, hence recovery of the transaction
would never make the on-disk LSN in the inode go backwards or get
out of sync.
A symptom of the problem is this, caught from a failure of
generic/482. Before log recovery, the inode has been allocated but
never used:
xfs_db> inode 393388
xfs_db> p
core.magic = 0x494e
core.mode = 0
....
v3.crc = 0x99126961 (correct)
v3.change_count = 0
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jan 1 10:00:00 1970
v3.crtime.nsec = 0
After log recovery:
xfs_db> p
core.magic = 0x494e
core.mode = 020444
....
v3.crc = 0x23e68f23 (correct)
v3.change_count = 2
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jul 22 17:03:03 2021
v3.crtime.nsec = 751000000
...
You can see that the LSN of the on-disk inode is 0, even though it
clearly has been written to disk. I point out this inode, because
the generic/482 failure occurred because several adjacent inodes in
this specific inode cluster were not replayed correctly and still
appeared to be zero on disk when all the other metadata (inobt,
finobt, directories, etc) indicated they should be allocated and
written back.
The fix for this is two-fold. The first is that we need to either
revert the LSN changes in 93f958f9c4 or stop logging the inode LSN
altogether. If we do the former, log recovery does not need to
change but we add 8 bytes of memory per inode to store what is
largely a write-only inode field. If we do the latter, log recovery
needs to stamp the on-disk inode in the same manner that inode
writeback does.
I prefer the latter, because we shouldn't really be trying to log
and replay changes to the on disk LSN as the on-disk value is the
canonical source of the on-disk version of the inode. It also
matches the way we recover buffer items - we create a buf_log_item
that carries the current recovery transaction LSN that gets stamped
into the buffer by the write verifier when it gets written back
when the transaction is fully recovered.
However, this might break log recovery on older kernels even more,
so I'm going to simply ignore the logged value in recovery and stamp
the on-disk inode with the LSN of the transaction being recovered
that will trigger writeback on transaction recovery completion. This
will ensure that the on-disk inode LSN always reflects the LSN of
the last change that was written to disk, regardless of whether it
comes from log recovery or runtime writeback.
Fixes: 93f958f9c4 ("xfs: cull unnecessary icdinode fields")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Before waiting on a iclog in xfs_log_force_lsn(), we don't check to
see if the iclog has already been completed and the contents on
stable storage. We check for completed iclogs in xfs_log_force(), so
we should do the same thing for xfs_log_force_lsn().
This fixed some random up-to-30s pauses seen in unmounting
filesystems in some tests. A log force ends up waiting on completed
iclog, and that doesn't then get flushed (and hence the log force
get completed) until the background log worker issues a log force
that flushes the iclog in question. Then the unmount unblocks and
continues.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
After fixing the tail_lsn vs cache flush race, generic/482 continued
to fail in a similar way where cache flushes were missing before
iclog FUA writes. Tracing of iclog state changes during the fsstress
workload portion of the test (via xlog_iclog* events) indicated that
iclog writes were coming from two sources - CIL pushes and log
forces (due to fsync/O_SYNC operations). All of the cases where a
recovery problem was triggered indicated that the log force was the
source of the iclog write that was not preceeded by a cache flush.
This was an oversight in the modifications made in commit
eef983ffea ("xfs: journal IO cache flush reductions"). Log forces
for fsync imply a data device cache flush has been issued if an
iclog was flushed to disk and is indicated to the caller via the
log_flushed parameter so they can elide the device cache flush if
the journal issued one.
The change in eef983ffea results in iclogs only issuing a cache
flush if XLOG_ICL_NEED_FLUSH is set on the iclog, but this was not
added to the iclogs that the log force code flushes to disk. Hence
log forces are no longer guaranteeing that a cache flush is issued,
hence opening up a potential on-disk ordering failure.
Log forces should also set XLOG_ICL_NEED_FUA as well to ensure that
the actual iclogs it forces to the journal are also on stable
storage before it returns to the caller.
This patch introduces the xlog_force_iclog() helper function to
encapsulate the process of taking a reference to an iclog, switching
its state if WANT_SYNC and flushing it to stable storage correctly.
Both xfs_log_force() and xfs_log_force_lsn() are converted to use
it, as is xlog_unmount_write() which has an elaborate method of
doing exactly the same "write this iclog to stable storage"
operation.
Further, if the log force code needs to wait on a iclog in the
WANT_SYNC state, it needs to ensure that iclog also results in a
cache flush being issued. This covers the case where the iclog
contains the commit record of the CIL flush that the log force
triggered, but it hasn't been written yet because there is still an
active reference to the iclog.
Note: this whole cache flush whack-a-mole patch is a result of log
forces still being iclog state centric rather than being CIL
sequence centric. Most of this nasty code will go away in future
when log forces are converted to wait on CIL sequence push
completion rather than iclog completion. With the CIL push algorithm
guaranteeing that the CIL checkpoint is fully on stable storage when
it completes, we no longer need to iterate iclogs and push them to
ensure a CIL sequence push has completed and so all this nasty iclog
iteration and flushing code will go away.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We force iclogs in several places - we need them all to have the
same cache flush semantics, so start by factoring out the iclog
force into a common helper.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There is a race between the new CIL async data device metadata IO
completion cache flush and the log tail in the iclog the flush
covers being updated. This can be seen by repeating generic/482 in a
loop and eventually log recovery fails with a failures such as this:
XFS (dm-3): Starting recovery (logdev: internal)
XFS (dm-3): bad inode magic/vsn daddr 228352 #0 (magic=0)
XFS (dm-3): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x37c00 xfs_inode_buf_verify
XFS (dm-3): Unmount and run xfs_repair
XFS (dm-3): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (dm-3): metadata I/O error in "xlog_recover_items_pass2+0x55/0xc0" at daddr 0x37c00 len 32 error 117
Analysis of the logwrite replay shows that there were no writes to
the data device between the FUA @ write 124 and the FUA at write @
125, but log recovery @ 125 failed. The difference was the one log
write @ 125 moved the tail of the log forwards from (1,8) to (1,32)
and so the inode create intent in (1,8) was not replayed and so the
inode cluster was zero on disk when replay of the first inode item
in (1,32) was attempted.
What this meant was that the journal write that occurred at @ 125
did not ensure that metadata completed before the iclog was written
was correctly on stable storage. The tail of the log moved forward,
so IO must have been completed between the two iclog writes. This
means that there is a race condition between the unconditional async
cache flush in the CIL push work and the tail LSN that is written to
the iclog. This happens like so:
CIL push work AIL push work
------------- -------------
Add to committing list
start async data dev cache flush
.....
<flush completes>
<all writes to old tail lsn are stable>
xlog_write
.... push inode create buffer
<start IO>
.....
xlog_write(commit record)
.... <IO completes>
log tail moves
xlog_assign_tail_lsn()
start_lsn == commit_lsn
<no iclog preflush!>
xlog_state_release_iclog
__xlog_state_release_iclog()
<writes *new* tail_lsn into iclog>
xlog_sync()
....
submit_bio()
<tail in log moves forward without flushing written metadata>
Essentially, this can only occur if the commit iclog is issued
without a cache flush. If the iclog bio is submitted with
REQ_PREFLUSH, then it will guarantee that all the completed IO is
one stable storage before the iclog bio with the new tail LSN in it
is written to the log.
IOWs, the tail lsn that is written to the iclog needs to be sampled
*before* we issue the cache flush that guarantees all IO up to that
LSN has been completed.
To fix this without giving up the performance advantage of the
flush/FUA optimisations (e.g. g/482 runtime halves with 5.14-rc1
compared to 5.13), we need to ensure that we always issue a cache
flush if the tail LSN changes between the initial async flush and
the commit record being written. THis requires sampling the tail_lsn
before we start the flush, and then passing the sampled tail LSN to
xlog_state_release_iclog() so it can determine if the the tail LSN
has changed while writing the checkpoint. If the tail LSN has
changed, then it needs to set the NEED_FLUSH flag on the iclog and
we'll issue another cache flush before writing the iclog.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Fold __xlog_state_release_iclog into its only caller to prepare
make an upcoming fix easier.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The recent journal flush/FUA changes replaced the flushing of the
data device on every iclog write with an up-front async data device
cache flush. Unfortunately, the assumption of which this was based
on has been proven incorrect by the flush vs log tail update
ordering issue. As the fix for that issue uses the
XLOG_ICL_NEED_FLUSH flag to indicate that data device needs a cache
flush, we now need to (once again) ensure that an iclog write to
external logs that need a cache flush to be issued actually issue a
cache flush to the data device as well as the log device.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We incorrectly flush the log device instead of the data device when
trying to ensure metadata is correctly on disk before writing the
unmount record.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* Fix shrink eligibility checking when sparse inode clusters enabled.
* Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later.
* Don't report unusable extent size hints to FSGETXATTR.
* Don't warn when extent size hints are unusable because the sysadmin
configured them that way.
* Fix insufficient parameter validation in GROWFSRT ioctl.
* Fix integer overflow when adding rt volumes to filesystem.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmDwajMACgkQ+H93GTRK
tOtPlw//TyFCUf8krAknSc5tF5yI77JPIj19a43frMN/L6G68aDu2eBhIHbpwzAL
LuPGksSqMJyBylwhZXYt83jfar0sGTl48sPqxYBr6YOj+LAmiba2PdlXGQPdWcC3
1DGqvaiFZ3ENRlk0GG0a4xPJK4nW18uujc6L8yxrzA+0VsFirorqvzay7COic0Js
b5eytqqbTsqvUc7+WX+yfWyyH+zWs+VIxBJVT7kirLY8u9Da5L54JdSbTWiXq7K0
8zu7d0oyiDpb0Yb5tylLh9eoG5TVHLNHN65Le7k1dCSw/zaJMFhpc0MsxJ9zVDI5
9NjmyOXP/uFGG/dvyqZUxOKsj2W0DwGeDRF3hxkLTWeiPFGfBYRHiBDCOpOoNIIy
i3hTUCAqlgt+Ehyau8HR68L06V6bD9j991HM3MK2phNRKgC+iCH1poXixjAcaddR
pAG1dF8WkEUQiKn9/oikNRAA8z5+z6NHZIZiEH1DUIGAh39SBVTuD2qSVIqj0BiR
pOy1gwVOFKpwdRps/JQVLPoGP7NHyOxJ2dLAYpWWYiPS2Ch6UvyXiL8aMTVF8DaV
G5Rsu+e0BJV38ass3enOOh1Nok//dIyKNS0iUO9TLdw5dZ6i3+36YeKskf+KLtXQ
m+i3hfAqM+EbyU/jUsykKWAeELV8FZTM2Ckc5utrkhOaZToktJ4=
=dKfy
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"A few fixes for issues in the new online shrink code, additional
corrections for my recent bug-hunt w.r.t. extent size hints on
realtime, and improved input checking of the GROWFSRT ioctl.
IOW, the usual 'I somehow got bored during the merge window and
resumed auditing the farther reaches of xfs':
- Fix shrink eligibility checking when sparse inode clusters enabled
- Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later
- Don't report unusable extent size hints to FSGETXATTR
- Don't warn when extent size hints are unusable because the sysadmin
configured them that way
- Fix insufficient parameter validation in GROWFSRT ioctl
- Fix integer overflow when adding rt volumes to filesystem"
* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: detect misaligned rtinherit directory extent size hints
xfs: fix an integer overflow error in xfs_growfs_rt
xfs: improve FSGROWFSRT precondition checking
xfs: don't expose misaligned extszinherit hints to userspace
xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
xfs: reset child dir '..' entry when unlinking child
xfs: check for sparse inode clusters that cross new EOAG when shrinking
If we encounter a directory that has been configured to pass on an
extent size hint to a new realtime file and the hint isn't an integer
multiple of the rt extent size, we should flag the hint for
administrative review because that is a misconfiguration (that other
parts of the kernel will fix automatically).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During a realtime grow operation, we run a single transaction for each
rt bitmap block added to the filesystem. This means that each step has
to be careful to increase sb_rblocks appropriately.
Fix the integer overflow error in this calculation that can happen when
the extent size is very large. Found by running growfs to add a rt
volume to a filesystem formatted with a 1g rt extent size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Improve the checking at the start of a realtime grow operation so that
we avoid accidentally set a new extent size that is too large and avoid
adding an rt volume to a filesystem with rmap or reflink because we
don't support rt rmap or reflink yet.
While we're at it, separate the checks so that we're only testing one
aspect at a time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 603f000b15 changed xfs_ioctl_setattr_check_extsize to reject an
attempt to set an EXTSZINHERIT extent size hint on a directory with
RTINHERIT set if the hint isn't a multiple of the realtime extent size.
However, I have recently discovered that it is possible to change the
realtime extent size when adding a rt device to a filesystem, which
means that the existence of directories with misaligned inherited hints
is not an accident.
As a result, it's possible that someone could have set a valid hint and
added an rt volume with a different rt extent size, which invalidates
the ondisk hints. After such a sequence, FSGETXATTR will report a
misaligned hint, which FSSETXATTR will trip over, causing confusion if
the user was doing the usual GET/SET sequence to change some other
attribute. Change xfs_fill_fsxattr to omit the hint if it isn't aligned
properly.
Fixes: 603f000b15 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While auditing the realtime growfs code, I realized that the GROWFSRT
ioctl (and by extension xfs_growfs) has always allowed sysadmins to
change the realtime extent size when adding a realtime section to the
filesystem. Since we also have always allowed sysadmins to set
RTINHERIT and EXTSZINHERIT on directories even if there is no realtime
device, this invalidates the premise laid out in the comments added in
commit 603f000b15.
In other words, this is not a case of inadequate metadata validation.
This is a case of nearly forgotten (and apparently untested) but
supported functionality. Update the comments to reflect what we've
learned, and remove the log message about correcting the misalignment.
Fixes: 603f000b15 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While running xfs/168, I noticed a second source of post-shrink
corruption errors causing shutdowns.
Let's say that directory B has a low inode number and is a child of
directory A, which has a high number. If B is empty but open, and
unlinked from A, B's dotdot link continues to point to A. If A is then
unlinked and the filesystem shrunk so that A is no longer a valid inode,
a subsequent AIL push of B will trip the inode verifiers because the
dotdot entry points outside of the filesystem.
To avoid this problem, reset B's dotdot entry to the root directory when
unlinking directories, since the root directory cannot be removed.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
While running xfs/168, I noticed occasional write verifier shutdowns
involving inodes at the very end of the filesystem. Existing inode
btree validation code checks that all inode clusters are fully contained
within the filesystem.
However, due to inadequate checking in the fs shrink code, it's possible
that there could be a sparse inode cluster at the end of the filesystem
where the upper inodes of the cluster are marked as holes and the
corresponding blocks are free. In this case, the last blocks in the AG
are listed in the bnobt. This enables the shrink to proceed but results
in a filesystem that trips the inode verifiers. Fix this by disallowing
the shrink.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Convert places in XFS that take MMAPLOCK for two inodes to use helper
VFS provides for it (filemap_invalidate_down_write_two()). Note that
this changes lock ordering for MMAPLOCK from inode number based ordering
to pointer based ordering VFS generally uses.
CC: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Use invalidate_lock instead of XFS internal i_mmap_lock. The intended
purpose of invalidate_lock is exactly the same. Note that the locking in
__xfs_filemap_fault() slightly changes as filemap_fault() already takes
invalidate_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
CC: <linux-xfs@vger.kernel.org>
CC: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Introduce a new __xfs_rwsem_islocked predicate to encapsulate checking
the state of a rw_semaphore, then refactor xfs_isilocked to use it.
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Suggested-by: Dave Chinner <dchinner@redhat.com>
Suggested-by: Eric Sandeen <sandeen@redhat.com>
Suggested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warnings by replacing /* fallthrough */ comments,
and its variants, with the new pseudo-keyword macro fallthrough:
fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Notice that Clang doesn't recognize /* fallthrough */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
- Refactor the buffer cache to use bulk page allocation
- Convert agnumber-based AG iteration to walk per-AG structures
- Clean up some unit conversions and other code warts
- Reduce spinlock contention in the directio fastpath
- Collapse all the inode cache walks into a single function
- Remove indirect function calls from the inode cache walk code
- Dramatically reduce the number of cache flushes sent when writing log
buffers
- Preserve inode sickness reports for longer
- Rename xfs_eofblocks since it controls inode cache walks
- Refactor the extended attribute code to prepare it for the addition
of log intent items to make xattrs fully transactional
- A few fixes to earlier large patchsets
- Log recovery fixes so that we don't accidentally mark the log clean
when log intent recovery fails
- Fix some latent SOB errors
- Clean up shutdown messages that get logged to dmesg
- Fix a regression in the online shrink code
- Fix a UAF in the buffer logging code if the fs goes offline
- Fix uninitialized error variables
- Fix a UAF in the CIL when commited log item callbacks race with a
shutdown
- Fix a bug where the CIL could hang trying to push part of the log ring
buffer that hasn't been filled yet
-----BEGIN PGP SIGNATURE-----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=08Q9
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Most of the work this cycle has been on refactoring various parts of
the codebase. The biggest non-cleanup changes are (1) reducing the
number of cache flushes sent when writing the log; (2) a substantial
number of log recovery fixes; and (3) I started accepting pull
requests from contributors if the commits in their branches match
what's been sent to the list.
For a week or so I /had/ staged a major cleanup of the logging code
from Dave Chinner, but it exposed so many lurking bugs in other parts
of the logging and log recovery code that I decided to defer that
patchset until we can address those latent bugs.
Larger cleanups this time include walking the incore inode cache (me)
and rework of the extended attribute code (Allison) to prepare it for
adding logged xattr updates (and directory tree parent pointers) in
future releases.
Summary:
- Refactor the buffer cache to use bulk page allocation
- Convert agnumber-based AG iteration to walk per-AG structures
- Clean up some unit conversions and other code warts
- Reduce spinlock contention in the directio fastpath
- Collapse all the inode cache walks into a single function
- Remove indirect function calls from the inode cache walk code
- Dramatically reduce the number of cache flushes sent when writing
log buffers
- Preserve inode sickness reports for longer
- Rename xfs_eofblocks since it controls inode cache walks
- Refactor the extended attribute code to prepare it for the addition
of log intent items to make xattrs fully transactional
- A few fixes to earlier large patchsets
- Log recovery fixes so that we don't accidentally mark the log clean
when log intent recovery fails
- Fix some latent SOB errors
- Clean up shutdown messages that get logged to dmesg
- Fix a regression in the online shrink code
- Fix a UAF in the buffer logging code if the fs goes offline
- Fix uninitialized error variables
- Fix a UAF in the CIL when commited log item callbacks race with a
shutdown
- Fix a bug where the CIL could hang trying to push part of the log
ring buffer that hasn't been filled yet"
* tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (102 commits)
xfs: don't wait on future iclogs when pushing the CIL
xfs: Fix a CIL UAF by getting get rid of the iclog callback lock
xfs: remove callback dequeue loop from xlog_state_do_iclog_callbacks
xfs: don't nest icloglock inside ic_callback_lock
xfs: Initialize error in xfs_attr_remove_iter
xfs: fix endianness issue in xfs_ag_shrink_space
xfs: remove dead stale buf unpin handling code
xfs: hold buffer across unpin and potential shutdown processing
xfs: force the log offline when log intent item recovery fails
xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes
xfs: shorten the shutdown messages to a single line
xfs: print name of function causing fs shutdown instead of hex pointer
xfs: fix type mismatches in the inode reclaim functions
xfs: separate primary inode selection criteria in xfs_iget_cache_hit
xfs: refactor the inode recycling code
xfs: add iclog state trace events
xfs: xfs_log_force_lsn isn't passed a LSN
xfs: Fix CIL throttle hang when CIL space used going backwards
xfs: journal IO cache flush reductions
xfs: remove need_start_rec parameter from xlog_write()
...
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
Use __set_page_dirty_no_writeback() instead. This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future. It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.
[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]
Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only difference between iomap_set_page_dirty() and
__set_page_dirty_nobuffers() is that the latter includes a debugging check
that a !Uptodate page has private data.
Link: https://lkml.kernel.org/r/20210615162342.1669332-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hi Linus,
Please, pull the following patches that fix many fall-through warnings
when building with Clang 12.0.0 and this[1] change reverted. Notice
that in order to enable -Wimplicit-fallthrough for Clang, such change[1]
is meant to be reverted at some point. So, these patches help to move
in that direction.
Thanks!
[1] commit e2079e93f5 ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
-----BEGIN PGP SIGNATURE-----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=Kt2q
-----END PGP SIGNATURE-----
Merge tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"Fix many fall-through warnings when building with Clang 12.0.0 and
'-Wimplicit-fallthrough' so that we at some point will be able to
enable that warning by default"
* tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits)
rxrpc: Fix fall-through warnings for Clang
drm/nouveau/clk: Fix fall-through warnings for Clang
drm/nouveau/therm: Fix fall-through warnings for Clang
drm/nouveau: Fix fall-through warnings for Clang
xfs: Fix fall-through warnings for Clang
xfrm: Fix fall-through warnings for Clang
tipc: Fix fall-through warnings for Clang
sctp: Fix fall-through warnings for Clang
rds: Fix fall-through warnings for Clang
net/packet: Fix fall-through warnings for Clang
net: netrom: Fix fall-through warnings for Clang
ide: Fix fall-through warnings for Clang
hwmon: (max6621) Fix fall-through warnings for Clang
hwmon: (corsair-cpro) Fix fall-through warnings for Clang
firewire: core: Fix fall-through warnings for Clang
braille_console: Fix fall-through warnings for Clang
ipv4: Fix fall-through warnings for Clang
qlcnic: Fix fall-through warnings for Clang
bnxt_en: Fix fall-through warnings for Clang
netxen_nic: Fix fall-through warnings for Clang
...
Certain uses of "do once" functionality reside outside of fast path,
and so do not require jump label patching via static keys, making
existing DO_ONCE undesirable in such cases.
Replace uses of __section(".data.once") with DO_ONCE_LITE(_IF)?
This patch changes the return values of xfs_printk_once, printk_once,
and printk_deferred_once. Before, they returned whether the print was
performed, but now, they always return true. This is okay because the
return values of the following macros are entirely ignored throughout
the kernel:
- xfs_printk_once
- xfs_warn_once
- xfs_notice_once
- xfs_info_once
- printk_once
- pr_emerg_once
- pr_alert_once
- pr_crit_once
- pr_err_once
- pr_warn_once
- pr_notice_once
- pr_info_once
- pr_devel_once
- pr_debug_once
- printk_deferred_once
- orc_warn
Changes
v3:
- Expand commit message to explain why changing return values of
xfs_printk_once, printk_once, printk_deferred_once is benign
v2:
- Fix i386 build warnings
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The iclogbuf ring attached to the struct xlog is circular, hence the
first and last iclogs in the ring can only be determined by
comparing them against the log->l_iclog pointer.
In xfs_cil_push_work(), we want to wait on previous iclogs that were
issued so that we can flush them to stable storage with the commit
record write, and it simply waits on the previous iclog in the ring.
This, however, leads to CIL push hangs in generic/019 like so:
task:kworker/u33:0 state:D stack:12680 pid: 7 ppid: 2 flags:0x00004000
Workqueue: xfs-cil/pmem1 xlog_cil_push_work
Call Trace:
__schedule+0x30b/0x9f0
schedule+0x68/0xe0
xlog_wait_on_iclog+0x121/0x190
? wake_up_q+0xa0/0xa0
xlog_cil_push_work+0x994/0xa10
? _raw_spin_lock+0x15/0x20
? xfs_swap_extents+0x920/0x920
process_one_work+0x1ab/0x390
worker_thread+0x56/0x3d0
? rescuer_thread+0x3c0/0x3c0
kthread+0x14d/0x170
? __kthread_bind_mask+0x70/0x70
ret_from_fork+0x1f/0x30
With other threads blocking in either xlog_state_get_iclog_space()
waiting for iclog space or xlog_grant_head_wait() waiting for log
reservation space.
The problem here is that the previous iclog on the ring might
actually be a future iclog. That is, if log->l_iclog points at
commit_iclog, commit_iclog is the first (oldest) iclog in the ring
and there are no previous iclogs pending as they have all completed
their IO and been activated again. IOWs, commit_iclog->ic_prev
points to an iclog that will be written in the future, not one that
has been written in the past.
Hence, in this case, waiting on the ->ic_prev iclog is incorrect
behaviour, and depending on the state of the future iclog, we can
end up with a circular ABA wait cycle and we hang.
The fix is made more complex by the fact that many iclogs states
cannot be used to determine if the iclog is a past or future iclog.
Hence we have to determine past iclogs by checking the LSN of the
iclog rather than their state. A past ACTIVE iclog will have a LSN
of zero, while a future ACTIVE iclog will have a LSN greater than
the current iclog. We don't wait on either of these cases.
Similarly, a future iclog that hasn't completed IO will have an LSN
greater than the current iclog and so we don't wait on them. A past
iclog that is still undergoing IO completion will have a LSN less
than the current iclog and those are the only iclogs that we need to
wait on.
Hence we can use the iclog LSN to determine what iclogs we need to
wait on here.
Fixes: 5fd9256ce156 ("xfs: separate CIL commit record IO")
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The iclog callback chain has it's own lock. That was added way back
in 2008 by myself to alleviate severe lock contention on the
icloglock in commit 114d23aae5 ("[XFS] Per iclog callback chain
lock"). This was long before delayed logging took the icloglock out
of the hot transaction commit path and removed all contention on it.
Hence the separate ic_callback_lock doesn't serve any scalability
purpose anymore, and hasn't for close on a decade.
Further, we only attach callbacks to iclogs in one place where we
are already taking the icloglock soon after attaching the callbacks.
We also have to drop the icloglock to run callbacks and grab it
immediately afterwards again. So given that the icloglock is no
longer hot, making it cover callbacks again doesn't really change
the locking patterns very much at all.
We also need to extend the icloglock to cover callback addition to
fix a zero-day UAF in the CIL push code. This occurs when shutdown
races with xlog_cil_push_work() and the shutdown runs the callbacks
before the push releases the iclog. This results in the CIL context
structure attached to the iclog being freed by the callback before
the CIL push has finished referencing it, leading to UAF bugs.
Hence, to avoid this UAF, we need the callback attachment to be
atomic with post processing of the commit iclog and references to
the structures being attached to the iclog. This requires holding
the icloglock as that's the only way to serialise iclog state
against a shutdown in progress.
The result is we need to be using the icloglock to protect the
callback list addition and removal and serialise them with shutdown.
That makes the ic_callback_lock redundant and so it can be removed.
Fixes: 71e330b593 ("xfs: Introduce delayed logging core code")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If we are processing callbacks on an iclog, nothing can be
concurrently adding callbacks to the loop. We only add callbacks to
the iclog when they are in ACTIVE or WANT_SYNC state, and we
explicitly do not add callbacks if the iclog is already in IOERROR
state.
The only way to have a dequeue racing with an enqueue is to be
processing a shutdown without a direct reference to an iclog in
ACTIVE or WANT_SYNC state. As the enqueue avoids this race
condition, we only ever need a single dequeue operation in
xlog_state_do_iclog_callbacks(). Hence we can remove the loop.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
It's completely unnecessary because callbacks are added to iclogs
without holding the icloglock, hence no amount of ordering between
the icloglock and ic_callback_lock will order the removal of
callbacks from the iclog.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
A recent bug report generated a warning that a code path in
xfs_attr_remove_iter could potentially return error uninitialized in the
case of XFS_DAS_RM_SHRINK state. Fix this by initializing error.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The AGI buffer is in big-endian format, so we must convert the
endianness to CPU format to do any comparisons.
Fixes: 46141dc891 ("xfs: introduce xfs_ag_shrink_space()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
This code goes back to a time when transaction commits wrote
directly to iclogs. The associated log items were pinned, written to
the log, and then "uncommitted" if some part of the log write had
failed. This uncommit sequence called an ->iop_unpin_remove()
handler that was eventually folded into ->iop_unpin() via the remove
parameter. The log subsystem has since changed significantly in that
transactions commit to the CIL instead of direct to iclogs, though
log items must still be aborted in the event of an eventual log I/O
error. However, the context for a log item abort is now asynchronous
from transaction commit, which means the committing transaction has
been freed by this point in time and the transaction uncommit
sequence of events is no longer relevant.
Further, since stale buffers remain locked at transaction commit
through unpin, we can be certain that the buffer is not associated
with any transaction when the unpin callback executes. Remove this
unused hunk of code and replace it with an assertion that the buffer
is disassociated from transaction context.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The special processing used to simulate a buffer I/O failure on fs
shutdown has a difficult to reproduce race that can result in a use
after free of the associated buffer. Consider a buffer that has been
committed to the on-disk log and thus is AIL resident. The buffer
lands on the writeback delwri queue, but is subsequently locked,
committed and pinned by another transaction before submitted for
I/O. At this point, the buffer is stuck on the delwri queue as it
cannot be submitted for I/O until it is unpinned. A log checkpoint
I/O failure occurs sometime later, which aborts the bli. The unpin
handler is called with the aborted log item, drops the bli reference
count, the pin count, and falls into the I/O failure simulation
path.
The potential problem here is that once the pin count falls to zero
in ->iop_unpin(), xfsaild is free to retry delwri submission of the
buffer at any time, before the unpin handler even completes. If
delwri queue submission wins the race to the buffer lock, it
observes the shutdown state and simulates the I/O failure itself.
This releases both the bli and delwri queue holds and frees the
buffer while xfs_buf_item_unpin() sits on xfs_buf_lock() waiting to
run through the same failure sequence. This problem is rare and
requires many iterations of fstest generic/019 (which simulates disk
I/O failures) to reproduce.
To avoid this problem, grab a hold on the buffer before the log item
is unpinned if the associated item has been aborted and will require
a simulated I/O failure. The hold is already required for the
simulated I/O failure, so the ordering simply guarantees the unpin
handler access to the buffer before it is unpinned and thus
processed by the AIL. This particular ordering is required so long
as the AIL does not acquire a reference on the bli, which is the
long term solution to this problem.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If any part of log intent item recovery fails, we should shut down the
log immediately to stop the log from writing a clean unmount record to
disk, because the metadata is not consistent. The inability to cancel a
dirty transaction catches most of these cases, but there are a few
things that have slipped through the cracks, such as ENOSPC from a
transaction allocation, or runtime errors that result in cancellation of
a non-dirty transaction.
This solves some weird behaviors reported by customers where a system
goes down, the first mount fails, the second succeeds, but then the fs
goes down later because of inconsistent metadata.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During regular operation, the xfs_inactive operations create
transactions with zero block reservation because in general we're
freeing space, not asking for more. The per-AG space reservations
created at mount time enable us to handle expansions of the refcount
btree without needing to reserve blocks to the transaction.
Unfortunately, log recovery doesn't create the per-AG space reservations
when intent items are being recovered. This isn't an issue for intent
item recovery itself because they explicitly request blocks, but any
inode inactivation that can happen during log recovery uses the same
xfs_inactive paths as regular runtime. If a refcount btree expansion
happens, the transaction will fail due to blk_res_used > blk_res, and we
shut down the filesystem unnecessarily.
Fix this problem by making per-AG reservations temporarily so that we
can handle the inactivations, and releasing them at the end. This
brings the recovery environment closer to the runtime environment.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Consolidate the shutdown messages to a single line containing the
reason, the passed-in flags, the source of the shutdown, and the end
result. This means we now only have one line to look for when
debugging, which is useful when the fs goes down while something else is
flooding dmesg.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
In xfs_do_force_shutdown, print the symbolic name of the function that
called us to shut down the filesystem instead of a raw hex pointer.
This makes debugging a lot easier:
XFS (sda): xfs_do_force_shutdown(0x2) called from line 2440 of file
fs/xfs/xfs_log.c. Return address = ffffffffa038bc38
becomes:
XFS (sda): xfs_do_force_shutdown(0x2) called from line 2440 of file
fs/xfs/xfs_log.c. Return address = xfs_trans_mod_sb+0x25
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
It's currently unlikely that we will ever end up with more than 4
billion inodes waiting for reclamation, but the fs object code uses long
int for object counts and we're certainly capable of generating that
many. Instead of truncating the internal counters, widen them and
report the object counts correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Hoist the code in xfs_iget_cache_hit that restores the VFS inode state
to an xfs_inode that was previously vfs-destroyed. The next patch will
add a new set of state flags, so we need the helper to avoid
duplication.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
For the DEBUGS!
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In doing an investigation into AIL push stalls, I was looking at the
log force code to see if an async CIL push could be done instead.
This lead me to xfs_log_force_lsn() and looking at how it works.
xfs_log_force_lsn() is only called from inode synchronisation
contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn
value as the LSN to sync the log to. This gets passed to
xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the
journal, and then used by xfs_log_force_lsn() to flush the iclogs to
the journal.
The problem is that ip->i_itemp->ili_last_lsn does not store a
log sequence number. What it stores is passed to it from the
->iop_committing method, which is called by xfs_log_commit_cil().
The value this passes to the iop_committing method is the CIL
context sequence number that the item was committed to.
As it turns out, xlog_cil_force_lsn() converts the sequence to an
actual commit LSN for the related context and returns that to
xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn"
variable that contained a sequence with an actual LSN and then uses
that to sync the iclogs.
This caused me some confusion for a while, even though I originally
wrote all this code a decade ago. ->iop_committing is only used by
a couple of log item types, and only inode items use the sequence
number it is passed.
Let's clean up the API, CIL structures and inode log item to call it
a sequence number, and make it clear that the high level code is
using CIL sequence numbers and not on-disk LSNs for integrity
synchronisation purposes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
A hang with tasks stuck on the CIL hard throttle was reported and
largely diagnosed by Donald Buczek, who discovered that it was a
result of the CIL context space usage decrementing in committed
transactions once the hard throttle limit had been hit and processes
were already blocked. This resulted in the CIL push not waking up
those waiters because the CIL context was no longer over the hard
throttle limit.
The surprising aspect of this was the CIL space usage going
backwards regularly enough to trigger this situation. Assumptions
had been made in design that the relogging process would only
increase the size of the objects in the CIL, and so that space would
only increase.
This change and commit message fixes the issue and documents the
result of an audit of the triggers that can cause the CIL space to
go backwards, how large the backwards steps tend to be, the
frequency in which they occur, and what the impact on the CIL
accounting code is.
Even though the CIL ctx->space_used can go backwards, it will only
do so if the log item is already logged to the CIL and contains a
space reservation for it's entire logged state. This is tracked by
the shadow buffer state on the log item. If the item is not
previously logged in the CIL it has no shadow buffer nor log vector,
and hence the entire size of the logged item copied to the log
vector is accounted to the CIL space usage. i.e. it will always go
up in this case.
If the item has a log vector (i.e. already in the CIL) and the size
decreases, then the existing log vector will be overwritten and the
space usage will go down. This is the only condition where the space
usage reduces, and it can only occur when an item is already tracked
in the CIL. Hence we are safe from CIL space usage underruns as a
result of log items decreasing in size when they are relogged.
Typically this reduction in CIL usage occurs from metadata blocks
being free, such as when a btree block merge occurs or a directory
enter/xattr entry is removed and the da-tree is reduced in size.
This generally results in a reduction in size of around a single
block in the CIL, but also tends to increase the number of log
vectors because the parent and sibling nodes in the tree needs to be
updated when a btree block is removed. If a multi-level merge
occurs, then we see reduction in size of 2+ blocks, but again the
log vector count goes up.
The other vector is inode fork size changes, which only log the
current size of the fork and ignore the previously logged size when
the fork is relogged. Hence if we are removing items from the inode
fork (dir/xattr removal in shortform, extent record removal in
extent form, etc) the relogged size of the inode for can decrease.
No other log items can decrease in size either because they are a
fixed size (e.g. dquots) or they cannot be relogged (e.g. relogging
an intent actually creates a new intent log item and doesn't relog
the old item at all.) Hence the only two vectors for CIL context
size reduction are relogging inode forks and marking buffers active
in the CIL as stale.
Long story short: the majority of the code does the right thing and
handles the reduction in log item size correctly, and only the CIL
hard throttle implementation is problematic and needs fixing. This
patch makes that fix, as well as adds comments in the log item code
that result in items shrinking in size when they are relogged as a
clear reminder that this can and does happen frequently.
The throttle fix is based upon the change Donald proposed, though it
goes further to ensure that once the throttle is activated, it
captures all tasks until the CIL push issues a wakeup, regardless of
whether the CIL space used has gone back under the throttle
threshold.
This ensures that we prevent tasks reducing the CIL slightly under
the throttle threshold and then making more changes that push it
well over the throttle limit. This is acheived by checking if the
throttle wait queue is already active as a condition of throttling.
Hence once we start throttling, we continue to apply the throttle
until the CIL context push wakes everything on the wait queue.
We can use waitqueue_active() for the waitqueue manipulations and
checks as they are all done under the ctx->xc_push_lock. Hence the
waitqueue has external serialisation and we can safely peek inside
the wait queue without holding the internal waitqueue locks.
Many thanks to Donald for his diagnostic and analysis work to
isolate the cause of this hang.
Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to
guarantee the ordering requirements the journal has w.r.t. metadata
writeback. THe two ordering constraints are:
1. we cannot overwrite metadata in the journal until we guarantee
that the dirty metadata has been written back in place and is
stable.
2. we cannot write back dirty metadata until it has been written to
the journal and guaranteed to be stable (and hence recoverable) in
the journal.
The ordering guarantees of #1 are provided by REQ_PREFLUSH. This
causes the journal IO to issue a cache flush and wait for it to
complete before issuing the write IO to the journal. Hence all
completed metadata IO is guaranteed to be stable before the journal
overwrites the old metadata.
The ordering guarantees of #2 are provided by the REQ_FUA, which
ensures the journal writes do not complete until they are on stable
storage. Hence by the time the last journal IO in a checkpoint
completes, we know that the entire checkpoint is on stable storage
and we can unpin the dirty metadata and allow it to be written back.
This is the mechanism by which ordering was first implemented in XFS
way back in 2002 by commit 95d97c36e5155075ba2eb22b17562cfcc53fcf96
("Add support for drive write cache flushing") in the xfs-archive
tree.
A lot has changed since then, most notably we now use delayed
logging to checkpoint the filesystem to the journal rather than
write each individual transaction to the journal. Cache flushes on
journal IO are necessary when individual transactions are wholly
contained within a single iclog. However, CIL checkpoints are single
transactions that typically span hundreds to thousands of individual
journal writes, and so the requirements for device cache flushing
have changed.
That is, the ordering rules I state above apply to ordering of
atomic transactions recorded in the journal, not to the journal IO
itself. Hence we need to ensure metadata is stable before we start
writing a new transaction to the journal (guarantee #1), and we need
to ensure the entire transaction is stable in the journal before we
start metadata writeback (guarantee #2).
Hence we only need a REQ_PREFLUSH on the journal IO that starts a
new journal transaction to provide #1, and it is not on any other
journal IO done within the context of that journal transaction.
The CIL checkpoint already issues a cache flush before it starts
writing to the log, so we no longer need the iclog IO to issue a
REQ_REFLUSH for us. Hence if XLOG_START_TRANS is passed
to xlog_write(), we no longer need to mark the first iclog in
the log write with REQ_PREFLUSH for this case. As an added bonus,
this ordering mechanism works for both internal and external logs,
meaning we can remove the explicit data device cache flushes from
the iclog write code when using external logs.
Given the new ordering semantics of commit records for the CIL, we
need iclogs containing commit records to issue a REQ_PREFLUSH. We
also require unmount records to do this. Hence for both
XLOG_COMMIT_TRANS and XLOG_UNMOUNT_TRANS xlog_write() calls we need
to mark the first iclog being written with REQ_PREFLUSH.
For both commit records and unmount records, we also want them
immediately on stable storage, so we want to also mark the iclogs
that contain these records to be marked REQ_FUA. That means if a
record is split across multiple iclogs, they are all marked REQ_FUA
and not just the last one so that when the transaction is completed
all the parts of the record are on stable storage.
And for external logs, unmount records need a pre-write data device
cache flush similar to the CIL checkpoint cache pre-flush as the
internal iclog write code does not do this implicitly anymore.
As an optimisation, when the commit record lands in the same iclog
as the journal transaction starts, we don't need to wait for
anything and can simply use REQ_FUA to provide guarantee #2. This
means that for fsync() heavy workloads, the cache flush behaviour is
completely unchanged and there is no degradation in performance as a
result of optimise the multi-IO transaction case.
The most notable sign that there is less IO latency on my test
machine (nvme SSDs) is that the "noiclogs" rate has dropped
substantially. This metric indicates that the CIL push is blocking
in xlog_get_iclog_space() waiting for iclog IO completion to occur.
With 8 iclogs of 256kB, the rate is appoximately 1 noiclog event to
every 4 iclog writes. IOWs, every 4th call to xlog_get_iclog_space()
is blocking waiting for log IO. With the changes in this patch, this
drops to 1 noiclog event for every 100 iclog writes. Hence it is
clear that log IO is completing much faster than it was previously,
but it is also clear that for large iclog sizes, this isn't the
performance limiting factor on this hardware.
With smaller iclogs (32kB), however, there is a substantial
difference. With the cache flush modifications, the journal is now
running at over 4000 write IOPS, and the journal throughput is
largely identical to the 256kB iclogs and the noiclog event rate
stays low at about 1:50 iclog writes. The existing code tops out at
about 2500 IOPS as the number of cache flushes dominate performance
and latency. The noiclog event rate is about 1:4, and the
performance variance is quite large as the journal throughput can
fall to less than half the peak sustained rate when the cache flush
rate prevents metadata writeback from keeping up and the log runs
out of space and throttles reservations.
As a result:
logbsize fsmark create rate rm -rf
before 32kb 152851+/-5.3e+04 5m28s
patched 32kb 221533+/-1.1e+04 5m24s
before 256kb 220239+/-6.2e+03 4m58s
patched 256kb 228286+/-9.2e+03 5m06s
The rm -rf times are included because I ran them, but the
differences are largely noise. This workload is largely metadata
read IO latency bound and the changes to the journal cache flushing
doesn't really make any noticable difference to behaviour apart from
a reduction in noiclog events from background CIL pushing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The CIL push is the only call to xlog_write that sets this variable
to true. The other callers don't need a start rec, and they tell
xlog_write what to do by passing the type of ophdr they need written
in the flags field. The need_start_rec parameter essentially tells
xlog_write to to write an extra ophdr with a XLOG_START_TRANS type,
so get rid of the variable to do this and pass XLOG_START_TRANS as
the flag value into xlog_write() from the CIL push.
$ size fs/xfs/xfs_log.o*
text data bss dec hex filename
27595 560 8 28163 6e03 fs/xfs/xfs_log.o.orig
27454 560 8 28022 6d76 fs/xfs/xfs_log.o.patched
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to
guarantee the ordering requirements the journal has w.r.t. metadata
writeback. THe two ordering constraints are:
1. we cannot overwrite metadata in the journal until we guarantee
that the dirty metadata has been written back in place and is
stable.
2. we cannot write back dirty metadata until it has been written to
the journal and guaranteed to be stable (and hence recoverable) in
the journal.
These rules apply to the atomic transactions recorded in the
journal, not to the journal IO itself. Hence we need to ensure
metadata is stable before we start writing a new transaction to the
journal (guarantee #1), and we need to ensure the entire transaction
is stable in the journal before we start metadata writeback
(guarantee #2).
The ordering guarantees of #1 are currently provided by REQ_PREFLUSH
being added to every iclog IO. This causes the journal IO to issue a
cache flush and wait for it to complete before issuing the write IO
to the journal. Hence all completed metadata IO is guaranteed to be
stable before the journal overwrites the old metadata.
However, for long running CIL checkpoints that might do a thousand
journal IOs, we don't need every single one of these iclog IOs to
issue a cache flush - the cache flush done before the first iclog is
submitted is sufficient to cover the entire range in the log that
the checkpoint will overwrite because the CIL space reservation
guarantees the tail of the log (completed metadata) is already
beyond the range of the checkpoint write.
Hence we only need a full cache flush between closing off the CIL
checkpoint context (i.e. when the push switches it out) and issuing
the first journal IO. Rather than plumbing this through to the
journal IO, we can start this cache flush the moment the CIL context
is owned exclusively by the push worker. The cache flush can be in
progress while we process the CIL ready for writing, hence
reducing the latency of the initial iclog write. This is especially
true for large checkpoints, where we might have to process hundreds
of thousands of log vectors before we issue the first iclog write.
In these cases, it is likely the cache flush has already been
completed by the time we have built the CIL log vector chain.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The new checkpoint cache flush mechanism requires us to issue an
unconditional cache flush before we start a new checkpoint. We don't
want to block for this if we can help it, and we have a fair chunk
of CPU work to do between starting the checkpoint and issuing the
first journal IO.
Hence it makes sense to amortise the latency cost of the cache flush
by issuing it asynchronously and then waiting for it only when we
need to issue the first IO in the transaction.
To do this, we need async cache flush primitives to submit the cache
flush bio and to wait on it. The block layer has no such primitives
for filesystems, so roll our own for the moment.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
It's a one line wrapper around blkdev_issue_flush(). Just replace it
with direct calls to blkdev_issue_flush().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
To allow for iclog IO device cache flush behaviour to be optimised,
we first need to separate out the commit record iclog IO from the
rest of the checkpoint so we can wait for the checkpoint IO to
complete before we issue the commit record.
This separation is only necessary if the commit record is being
written into a different iclog to the start of the checkpoint as the
upcoming cache flushing changes requires completion ordering against
the other iclogs submitted by the checkpoint.
If the entire checkpoint and commit is in the one iclog, then they
are both covered by the one set of cache flush primitives on the
iclog and hence there is no need to separate them for ordering.
Otherwise, we need to wait for all the previous iclogs to complete
so they are ordered correctly and made stable by the REQ_PREFLUSH
that the commit record iclog IO issues. This guarantees that if a
reader sees the commit record in the journal, they will also see the
entire checkpoint that commit record closes off.
This also provides the guarantee that when the commit record IO
completes, we can safely unpin all the log items in the checkpoint
so they can be written back because the entire checkpoint is stable
in the journal.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
On 32-bit (e.g. m68k):
ERROR: modpost: "__udivdi3" [fs/xfs/xfs.ko] undefined!
Fix this by using a uint32_t intermediate, like before.
Reported-by: noreply@ellerman.id.au
Fixes: 7660a5b48fbef958 ("xfs: log stripe roundoff is a property of the log")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We don't need to look at the xfs_mount and superblock every time we
need to do an iclog roundoff calculation. The property is fixed for
the life of the log, so store the roundoff in the log at mount time
and use that everywhere.
On a debug build:
$ size fs/xfs/xfs_log.o.*
text data bss dec hex filename
27360 560 8 27928 6d18 fs/xfs/xfs_log.o.orig
27219 560 8 27787 6c8b fs/xfs/xfs_log.o.patched
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
'error' will be initialized, so clean up the redundant initialization.
Cc: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dan Carpenter's static checker reported:
The patch 7b13c5155182: "xfs: use perag for ialloc btree cursors"
from Jun 2, 2021, leads to the following Smatch complaint:
fs/xfs/libxfs/xfs_ialloc.c:2403 xfs_imap()
error: we previously assumed 'pag' could be null (see line 2294)
And it's right. Fix it.
Fixes: 7b13c51551 ("xfs: use perag for ialloc btree cursors")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
xfs: Delay Ready Attributes
Hi all,
This set is a subset of a larger series for Dealyed Attributes. Which is a
subset of a yet larger series for parent pointers. Delayed attributes allow
attribute operations (set and remove) to be logged and committed in the same
way that other delayed operations do. This allows more complex operations (like
parent pointers) to be broken up into multiple smaller transactions. To do
this, the existing attr operations must be modified to operate as a delayed
operation. This means that they cannot roll, commit, or finish transactions.
Instead, they return -EAGAIN to allow the calling function to handle the
transaction. In this series, we focus on only the delayed attribute portion.
We will introduce parent pointers in a later set.
The set as a whole is a bit much to digest at once, so I usually send out the
smaller sub series to reduce reviewer burn out. But the entire extended series
is visible through the included github links.
Updates since v19: Added Darricks fix for the remote block accounting as well as
some minor nits about the default assert in xfs_attr_set_iter. Spent quite
a bit of time testing this cycle to weed out any more unexpected bugs. No new
test failures were observed with the addition of this set.
xfs: Fix default ASSERT in xfs_attr_set_iter
Replaced the assert with ASSERT(0);
xfs: Add delay ready attr remove routines
Added Darricks fix for remote block accounting
This series can be viewed on github here:
https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_v20
As well as the extended delayed attribute and parent pointer series:
https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_v20_extended
And the test cases:
https://github.com/allisonhenderson/xfs_work/tree/pptr_xfstestsv3
In order to run the test cases, you will need have the corresponding xfsprogs
changes as well. Which can be found here:
https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_xfsprogs_v20https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_xfsprogs_v20_extended
To run the xfs attributes tests run:
check -g attr
To run as delayed attributes run:
export MOUNT_OPTIONS="-o delattr"
check -g attr
To run parent pointer tests:
check -g parent
I've also made the corresponding updates to the user space side as well, and ported anything
they need to seat correctly.
Questions, comment and feedback appreciated!
Thanks all!
Allison
* tag 'xfs-delay-ready-attrs-v20.1' of https://github.com/allisonhenderson/xfs_work:
xfs: Make attr name schemes consistent
xfs: Fix default ASSERT in xfs_attr_set_iter
xfs: Clean up xfs_attr_node_addname_clear_incomplete
xfs: Remove xfs_attr_rmtval_set
xfs: Add delay ready attr set routines
xfs: Add delay ready attr remove routines
xfs: Hoist node transaction handling
xfs: Hoist xfs_attr_leaf_addname
xfs: Hoist xfs_attr_node_addname
xfs: Add helper xfs_attr_node_addname_find_attr
xfs: Separate xfs_attr_node_addname and xfs_attr_node_addname_clear_incomplete
xfs: Refactor xfs_attr_set_shortform
xfs: Add xfs_attr_node_remove_name
xfs: Reverse apply 72b97ea40d
This patch renames the following functions to make the nameing scheme more consistent:
xfs_attr_shortform_remove -> xfs_attr_sf_removename
xfs_attr_node_remove_name -> xfs_attr_node_removename
xfs_attr_set_fmt -> xfs_attr_sf_addname
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This ASSERT checks for the state value of RM_SHRINK in the set path
which should never happen. Change to ASSERT(0);
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The xfs_eofblocks structure is no longer well-named -- nowadays it
provides optional filtering criteria to any walk of the incore inode
cache. Only one of the cache walk goals has anything to do with
clearing of speculative post-EOF preallocations, so change the name to
be more appropriate.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In preparation for renaming struct xfs_eofblocks to struct xfs_icwalk,
change the prefix of the existing XFS_EOF_FLAGS_* flags to
XFS_ICWALK_FLAG_ and convert all the existing users. This adds a degree
of interface separation between the ioctl definitions and the incore
parameters. Since FLAGS_UNION is only used in xfs_icache.c, move it
there as a private flag.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
It's important that the filesystem retain its memory of sick inodes for
a little while after problems are found so that reports can be collected
about what was wrong. Don't let inode reclamation free sick inodes
unless we're unmounting or the fs already went down.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
When we decide to mark an inode sick, clear the DONTCACHE flag so that
the incore inode will be kept around until memory pressure forces it out
of memory. This increases the chances that the sick status will be
caught by someone compiling a health report later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
While running some fuzz tests on inode metadata, I noticed that the
filesystem health report (as provided by xfs_spaceman) failed to report
the file corruption even when spaceman was run immediately after running
xfs_scrub to detect the corruption. That isn't the intended behavior;
one ought to be able to run scrub to detect errors in the ondisk
metadata and be able to access to those reports for some time after the
scrub.
After running the same sequence through an instrumented kernel, I
discovered the reason why -- scrub igets the file, scans it, marks it
sick, and ireleases the inode. When the VFS lets go of the incore
inode, it moves to RECLAIMABLE state. If spaceman igets the incore
inode before it moves to RECLAIM state, iget reinitializes the VFS
state, clears the sick and checked masks, and hands back the inode. At
this point, the caller has the exact same incore inode, but with all the
health state erased.
In other words, we're erasing the incore inode's health state flags when
we've decided NOT to sever the link between the incore inode and the
ondisk inode. This is wrong, so we need to remove the lines that zero
the fields from xfs_iget_cache_hit.
As a precaution, we add the same lines into xfs_reclaim_inode just after
we sever the link between incore and ondisk inode. Strictly speaking
this isn't necessary because once an inode has gone through reclaim it
must go through xfs_inode_alloc (which also zeroes the state) and
xfs_iget is careful to check for mismatches between the inode it pulls
out of the radix tree and the one it wants.
Fixes: 6772c1f112 ("xfs: track metadata health status")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
This ambitious series aims to cleans up redundant inode walk code in
xfs_icache.c, hide implementation details of the quotaoff dquot release
code, and eliminates indirect function calls from incore inode walks.
The first thing it does is to move all the code that quotaoff calls to
release dquots from all incore inodes into xfs_icache.c. Next, it
separates the goal of an inode walk from the actual radix tree tags that
may or may not be involved and drops the kludgy XFS_ICI_NO_TAG thing.
Finally, we split the speculative preallocation (blockgc) and quotaoff
dquot release code paths into separate functions so that we can keep the
implementations cohesive.
Christoph suggested last cycle that we 'simply' change quotaoff not to
allow deactivating quota entirely, but as these cleanups are to enable
one major change in behavior (deferred inode inactivation) I do not want
to add a second behavior change (quotaoff) as a dependency.
To be blunt: Additional cleanups are not in scope for this series.
Next, I made two observations about incore inode radix tree walks --
since there's a 1:1 mapping between the walk goal and the per-inode
processing function passed in, we can use the goal to make a direct call
to the processing function. Furthermore, the only caller to supply a
nonzero iter_flags argument is quotaoff, and there's only one INEW flag.
From that observation, I concluded that it's quite possible to remove
two parameters from the xfs_inode_walk* function signatures -- the
iter_flags, and the execute function pointer. The middle of the series
moves the INEW functionality into the one piece (quotaoff) that wants
it, and removes the indirect calls.
The final observation is that the inode reclaim walk loop is now almost
the same as xfs_inode_walk, so it's silly to maintain two copies. Merge
the reclaim loop code into xfs_inode_walk.
Lastly, refactor the per-ag radix tagging functions since there's
duplicated code that can be consolidated.
This series is a prerequisite for the next two patchsets, since deferred
inode inactivation will add another inode radix tree tag and iterator
function to xfs_inode_walk.
v2: walk the vfs inode list when running quotaoff instead of the radix
tree, then rework the (now completely internal) inode walk function
to take the tag as the main parameter.
v3: merge the reclaim loop into xfs_inode_walk, then consolidate the
radix tree tagging functions
v4: rebase to 5.13-rc4
v5: combine with the quotaoff patchset, reorder functions to minimize
forward declarations, split inode walk goals from radix tree tags
to reduce conceptual confusion
v6: start moving the inode cache code towards the xfs_icwalk prefix
-----BEGIN PGP SIGNATURE-----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=Rxdn
-----END PGP SIGNATURE-----
Merge tag 'inode-walk-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2
xfs: clean up incore inode walk functions
This ambitious series aims to cleans up redundant inode walk code in
xfs_icache.c, hide implementation details of the quotaoff dquot release
code, and eliminates indirect function calls from incore inode walks.
The first thing it does is to move all the code that quotaoff calls to
release dquots from all incore inodes into xfs_icache.c. Next, it
separates the goal of an inode walk from the actual radix tree tags that
may or may not be involved and drops the kludgy XFS_ICI_NO_TAG thing.
Finally, we split the speculative preallocation (blockgc) and quotaoff
dquot release code paths into separate functions so that we can keep the
implementations cohesive.
Christoph suggested last cycle that we 'simply' change quotaoff not to
allow deactivating quota entirely, but as these cleanups are to enable
one major change in behavior (deferred inode inactivation) I do not want
to add a second behavior change (quotaoff) as a dependency.
To be blunt: Additional cleanups are not in scope for this series.
Next, I made two observations about incore inode radix tree walks --
since there's a 1:1 mapping between the walk goal and the per-inode
processing function passed in, we can use the goal to make a direct call
to the processing function. Furthermore, the only caller to supply a
nonzero iter_flags argument is quotaoff, and there's only one INEW flag.
From that observation, I concluded that it's quite possible to remove
two parameters from the xfs_inode_walk* function signatures -- the
iter_flags, and the execute function pointer. The middle of the series
moves the INEW functionality into the one piece (quotaoff) that wants
it, and removes the indirect calls.
The final observation is that the inode reclaim walk loop is now almost
the same as xfs_inode_walk, so it's silly to maintain two copies. Merge
the reclaim loop code into xfs_inode_walk.
Lastly, refactor the per-ag radix tagging functions since there's
duplicated code that can be consolidated.
This series is a prerequisite for the next two patchsets, since deferred
inode inactivation will add another inode radix tree tag and iterator
function to xfs_inode_walk.
v2: walk the vfs inode list when running quotaoff instead of the radix
tree, then rework the (now completely internal) inode walk function
to take the tag as the main parameter.
v3: merge the reclaim loop into xfs_inode_walk, then consolidate the
radix tree tagging functions
v4: rebase to 5.13-rc4
v5: combine with the quotaoff patchset, reorder functions to minimize
forward declarations, split inode walk goals from radix tree tags
to reduce conceptual confusion
v6: start moving the inode cache code towards the xfs_icwalk prefix
* tag 'inode-walk-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: refactor per-AG inode tagging functions
xfs: merge xfs_reclaim_inodes_ag into xfs_inode_walk_ag
xfs: pass struct xfs_eofblocks to the inode scan callback
xfs: fix radix tree tag signs
xfs: make the icwalk processing functions clean up the grab state
xfs: clean up inode state flag tests in xfs_blockgc_igrab
xfs: remove indirect calls from xfs_inode_walk{,_ag}
xfs: remove iter_flags parameter from xfs_inode_walk_*
xfs: move xfs_inew_wait call into xfs_dqrele_inode
xfs: separate the dqrele_all inode grab logic from xfs_inode_walk_ag_grab
xfs: pass the goal of the incore inode walk to xfs_inode_walk()
xfs: rename xfs_inode_walk functions to xfs_icwalk
xfs: move the inode walk functions further down
xfs: detach inode dquots at the end of inactivation
xfs: move the quotaoff dqrele inode walk into xfs_icache.c
[djwong: added variable names to function declarations while fixing
merge conflicts]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This branch contains the first round of various small fixes for 5.14.
-----BEGIN PGP SIGNATURE-----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=6eZB
-----END PGP SIGNATURE-----
Merge tag 'assorted-fixes-5.14-1_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2
xfs: assorted fixes for 5.14, part 1
This branch contains the first round of various small fixes for 5.14.
* tag 'assorted-fixes-5.14-1_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: don't take a spinlock unconditionally in the DIO fastpath
xfs: mark xfs_bmap_set_attrforkoff static
xfs: Remove redundant assignment to busy
xfs: sort variable alphabetically to avoid repeated declaration
Crafting the realtime file extent size hint fixes revealed various
opportunities to clean up unit conversions, so now that gets its own
series.
-----BEGIN PGP SIGNATURE-----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=HGL1
-----END PGP SIGNATURE-----
Merge tag 'unit-conversion-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2
xfs: various unit conversions
Crafting the realtime file extent size hint fixes revealed various
opportunities to clean up unit conversions, so now that gets its own
series.
* tag 'unit-conversion-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: remove unnecessary shifts
xfs: clean up open-coded fs block unit conversions
From: Dave Chinner <dchinner@redhat.com>
Stephen Rothwell reported this compiler warning from linux-next:
fs/xfs/libxfs/xfs_ialloc.c: In function 'xfs_difree_finobt':
fs/xfs/libxfs/xfs_ialloc.c:2032:20: warning: unused variable 'agi' [-Wunused-variable]
2032 | struct xfs_agi *agi = agbp->b_addr;
Which is fallout from agno -> perag conversions that were done in
this function. xfs_check_agi_freecount() is the only user of "agi"
in xfs_difree_finobt() now, and it only uses the agi to get the
current free inode count. We hold that in the perag structure, so
there's not need to directly reference the raw AGI to get this
information.
The btree cursor being passed to xfs_check_agi_freecount() has a
reference to the perag being operated on, so use that directly in
xfs_check_agi_freecount() rather than passing an AGI.
Fixes: 7b13c51551 ("xfs: use perag for ialloc btree cursors")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If we want to use active references to the perag to be able to gate
shrink removing AGs and hence perags safely, we've got a fair bit of
work to do actually use perags in all the places we need to.
There's a lot of code that iterates ag numbers and then
looks up perags from that, often multiple times for the same perag
in the one operation. If we want to use reference counted perags for
access control, then we need to convert all these uses to perag
iterators, not agno iterators.
[Patches 1-4]
The first step of this is consolidating all the perag management -
init, free, get, put, etc into a common location. THis is spread all
over the place right now, so move it all into libxfs/xfs_ag.[ch].
This does expose kernel only bits of the perag to libxfs and hence
userspace, so the structures and code is rearranged to minimise the
number of ifdefs that need to be added to the userspace codebase.
The perag iterator in xfs_icache.c is promoted to a first class API
and expanded to the needs of the code as required.
[Patches 5-10]
These are the first basic perag iterator conversions and changes to
pass the perag down the stack from those iterators where
appropriate. A lot of this is obvious, simple changes, though in
some places we stop passing the perag down the stack because the
code enters into an as yet unconverted subsystem that still uses raw
AGs.
[Patches 11-16]
These replace the agno passed in the btree cursor for per-ag btree
operations with a perag that is passed to the cursor init function.
The cursor takes it's own reference to the perag, and the reference
is dropped when the cursor is deleted. Hence we get reference
coverage for the entire time the cursor is active, even if the code
that initialised the cursor drops it's reference before the cursor
or any of it's children (duplicates) have been deleted.
The first patch adds the perag infrastructure for the cursor, the
next four patches convert a btree cursor at a time, and the last
removes the agno from the cursor once it is unused.
[Patches 17-21]
These patches are a demonstration of the simplifications and
cleanups that come from plumbing the perag through interfaces that
select and then operate on a specific AG. In this case the inode
allocation algorithm does up to three walks across all AGs before it
either allocates an inode or fails. Two of these walks are purely
just to select the AG, and even then it doesn't guarantee inode
allocation success so there's a third walk if the selected AG
allocation fails.
These patches collapse the selection and allocation into a single
loop, simplifies the error handling because xfs_dir_ialloc() always
returns ENOSPC if no AG was selected for inode allocation or we fail
to allocate an inode in any AG, gets rid of xfs_dir_ialloc()
wrapper, converts inode allocation to run entirely from a single
perag instance, and then factors xfs_dialloc() into a much, much
simpler loop which is easy to understand.
Hence we end up with the same inode allocation logic, but it only
needs two complete iterations at worst, makes AG selection and
allocation atomic w.r.t. shrink and chops out out over 100 lines of
code from this hot code path.
[Patch 22]
Converts the unlink path to pass perags through it.
There's more conversion work to be done, but this patchset gets
through a large chunk of it in one hit. Most of the iterators are
converted, so once this is solidified we can move on to converting
these to active references for being able to free perags while the
fs is still active.
-----BEGIN PGP SIGNATURE-----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=YNzW
-----END PGP SIGNATURE-----
Merge tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2
xfs: initial agnumber -> perag conversions for shrink
If we want to use active references to the perag to be able to gate
shrink removing AGs and hence perags safely, we've got a fair bit of
work to do actually use perags in all the places we need to.
There's a lot of code that iterates ag numbers and then
looks up perags from that, often multiple times for the same perag
in the one operation. If we want to use reference counted perags for
access control, then we need to convert all these uses to perag
iterators, not agno iterators.
[Patches 1-4]
The first step of this is consolidating all the perag management -
init, free, get, put, etc into a common location. THis is spread all
over the place right now, so move it all into libxfs/xfs_ag.[ch].
This does expose kernel only bits of the perag to libxfs and hence
userspace, so the structures and code is rearranged to minimise the
number of ifdefs that need to be added to the userspace codebase.
The perag iterator in xfs_icache.c is promoted to a first class API
and expanded to the needs of the code as required.
[Patches 5-10]
These are the first basic perag iterator conversions and changes to
pass the perag down the stack from those iterators where
appropriate. A lot of this is obvious, simple changes, though in
some places we stop passing the perag down the stack because the
code enters into an as yet unconverted subsystem that still uses raw
AGs.
[Patches 11-16]
These replace the agno passed in the btree cursor for per-ag btree
operations with a perag that is passed to the cursor init function.
The cursor takes it's own reference to the perag, and the reference
is dropped when the cursor is deleted. Hence we get reference
coverage for the entire time the cursor is active, even if the code
that initialised the cursor drops it's reference before the cursor
or any of it's children (duplicates) have been deleted.
The first patch adds the perag infrastructure for the cursor, the
next four patches convert a btree cursor at a time, and the last
removes the agno from the cursor once it is unused.
[Patches 17-21]
These patches are a demonstration of the simplifications and
cleanups that come from plumbing the perag through interfaces that
select and then operate on a specific AG. In this case the inode
allocation algorithm does up to three walks across all AGs before it
either allocates an inode or fails. Two of these walks are purely
just to select the AG, and even then it doesn't guarantee inode
allocation success so there's a third walk if the selected AG
allocation fails.
These patches collapse the selection and allocation into a single
loop, simplifies the error handling because xfs_dir_ialloc() always
returns ENOSPC if no AG was selected for inode allocation or we fail
to allocate an inode in any AG, gets rid of xfs_dir_ialloc()
wrapper, converts inode allocation to run entirely from a single
perag instance, and then factors xfs_dialloc() into a much, much
simpler loop which is easy to understand.
Hence we end up with the same inode allocation logic, but it only
needs two complete iterations at worst, makes AG selection and
allocation atomic w.r.t. shrink and chops out out over 100 lines of
code from this hot code path.
[Patch 22]
Converts the unlink path to pass perags through it.
There's more conversion work to be done, but this patchset gets
through a large chunk of it in one hit. Most of the iterators are
converted, so once this is solidified we can move on to converting
these to active references for being able to free perags while the
fs is still active.
* tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (23 commits)
xfs: remove xfs_perag_t
xfs: use perag through unlink processing
xfs: clean up and simplify xfs_dialloc()
xfs: inode allocation can use a single perag instance
xfs: get rid of xfs_dir_ialloc()
xfs: collapse AG selection for inode allocation
xfs: simplify xfs_dialloc_select_ag() return values
xfs: remove agno from btree cursor
xfs: use perag for ialloc btree cursors
xfs: convert allocbt cursors to use perags
xfs: convert refcount btree cursor to use perags
xfs: convert rmap btree cursor to using a perag
xfs: add a perag to the btree cursor
xfs: pass perags around in fsmap data dev functions
xfs: push perags through the ag reservation callouts
xfs: pass perags through to the busy extent code
xfs: convert secondary superblock walk to use perags
xfs: convert xfs_iwalk to use perag references
xfs: convert raw ag walks to use for_each_perag
xfs: make for_each_perag... a first class citizen
...
This patchset makes use of the new bulk page allocation interface to
reduce the overhead of allocating large numbers of pages in a
loop.
The first two patches are refactoring buffer memory allocation and
converting the uncached buffer path to use the same page allocation
path, followed by converting the page allocation path to use bulk
allocation.
The rest of the patches are then consolidation of the page
allocation and freeing code to simplify the code and remove a chunk
of unnecessary abstraction. This is largely based on a series of
changes made by Christoph Hellwig.
-----BEGIN PGP SIGNATURE-----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=JsrV
-----END PGP SIGNATURE-----
Merge tag 'xfs-buf-bulk-alloc-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2
xfs: buffer cache bulk page allocation
This patchset makes use of the new bulk page allocation interface to
reduce the overhead of allocating large numbers of pages in a
loop.
The first two patches are refactoring buffer memory allocation and
converting the uncached buffer path to use the same page allocation
path, followed by converting the page allocation path to use bulk
allocation.
The rest of the patches are then consolidation of the page
allocation and freeing code to simplify the code and remove a chunk
of unnecessary abstraction. This is largely based on a series of
changes made by Christoph Hellwig.
* tag 'xfs-buf-bulk-alloc-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: merge xfs_buf_allocate_memory
xfs: cleanup error handling in xfs_buf_get_map
xfs: get rid of xb_to_gfp()
xfs: simplify the b_page_count calculation
xfs: remove ->b_offset handling for page backed buffers
xfs: move page freeing into _xfs_buf_free_pages()
xfs: merge _xfs_buf_get_pages()
xfs: use alloc_pages_bulk_array() for buffers
xfs: use xfs_buf_alloc_pages for uncached buffers
xfs: split up xfs_buf_allocate_memory
It only has one caller and is now a simple function, so merge it
into the caller.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Use a single goto label for freeing the buffer and returning an
error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Only used in one place, so just open code the logic in the macro.
Based on a patch from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Ever since we stopped using the Linux page cache to back XFS buffers
there is no need to take the start sector into account for
calculating the number of pages in a buffer, as the data always
start from the beginning of the buffer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[dgc: modified to suit this series]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
->b_offset can only be non-zero for _XBF_KMEM backed buffers, so
remove all code dealing with it for page backed buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[dgc: modified to fit this patchset]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
In preparation for adding another incore inode tree tag, refactor the
code that sets and clears tags from the per-AG inode tree and the tree
of per-AG structures, and remove the open-coded versions used by the
blockgc code.
Note: For reclaim, we now rely on the radix tree tags instead of the
reclaimable inode count more heavily than we used to. The conversion
should be fine, but the logic isn't 100% identical.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Merge these two inode walk loops together, since they're pretty similar
now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Pass a pointer to the actual eofb structure around the inode scanner
functions instead of a void pointer, now that none of the functions is
used as a callback.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Radix tree tags are supposed to be unsigned ints, so fix the callers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Soon we're going to be adding two new callers to the incore inode walk
code: reclaim of incore inodes, and (later) inactivation of inodes.
Both states operate on inodes that no longer have any VFS state, so we
need to move the xfs_irele calls into the processing functions.
In other words, icwalk processing functions are responsible for cleaning
up whatever state changes are made by the corresponding icwalk igrab
function that picked the inode for processing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Clean up the definition of which inode states are not eligible for
speculative preallocation garbage collecting by creating a private
#define. The deferred inactivation patchset will add two new entries to
the set of flags-to-ignore, so we want the definition not to end up a
cluttered mess.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
It turns out that there is a 1:1 mapping between the execute and goal
parameters that are passed to xfs_inode_walk_ag:
xfs_blockgc_scan_inode <=> XFS_ICWALK_BLOCKGC
xfs_dqrele_inode <=> XFS_ICWALK_DQRELE
Because of this exact correspondence, we don't need the execute function
pointer and can replace it with a direct call.
For the price of a forward static declaration, we can eliminate the
indirect function call. This likely has a negligible impact on
performance (since the execute function runs transactions), but it also
simplifies the function signature.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The sole iter_flags is XFS_INODE_WALK_INEW_WAIT, and there are no users.
Remove the flag, and the parameter, and all the code that used it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Move the INEW wait into xfs_dqrele_inode so that we can drop the
iter_flags parameter in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Disentangle the dqrele_all inode grab code from the "generic" inode walk
grabbing code, and and use the opportunity to document why the dqrele
grab function does what it does. Since xfs_inode_walk_ag_grab is now
only used for blockgc, rename it to reflect that.
Ultimately, there will be four reasons to perform a walk of incore
inodes: quotaoff dquote releasing (dqrele), garbage collection of
speculative preallocations (blockgc), reclamation of incore inodes
(reclaim), and deferred inactivation (inodegc). Each of these four have
their own slightly different criteria for deciding if they want to
handle an inode, so it makes more sense to have four cohesive igrab
functions than one confusing parameteric grab function like we do now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
As part of removing the indirect calls and radix tag implementation
details from the incore inode walk loop, create an enum to represent the
goal of the inode iteration. More immediately, this separate removes
the need for the "ICI_NOTAG" define which makes little sense.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Shorten the prefix so that all the incore inode cache walk code has
"xfs_icwalk" in the name somewhere.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Move the inode walk functions further down in the file to limit the
forward declarations to the two walk functions as we add new code that
uses the inode walks. We'll clean them out later (i.e. after the
deferred inode inactivation series).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Once we're done with inactivating an inode, we're finished updating
metadata for that inode. This means that we can detach the dquots at
the end and not have to wait for reclaim to do it for us.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The only external caller of xfs_inode_walk* happens in quotaoff, when we
want to walk all the incore inodes to detach the dquots. Move this code
to xfs_icache.c so that we can hide xfs_inode_walk as the starting step
in more cleanups of inode walks.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Because this happens at high thread counts on high IOPS devices
doing mixed read/write AIO-DIO to a single file at about a million
iops:
64.09% 0.21% [kernel] [k] io_submit_one
- 63.87% io_submit_one
- 44.33% aio_write
- 42.70% xfs_file_write_iter
- 41.32% xfs_file_dio_write_aligned
- 25.51% xfs_file_write_checks
- 21.60% _raw_spin_lock
- 21.59% do_raw_spin_lock
- 19.70% __pv_queued_spin_lock_slowpath
This also happens of the IO completion IO path:
22.89% 0.69% [kernel] [k] xfs_dio_write_end_io
- 22.49% xfs_dio_write_end_io
- 21.79% _raw_spin_lock
- 20.97% do_raw_spin_lock
- 20.10% __pv_queued_spin_lock_slowpath
IOWs, fio is burning ~14 whole CPUs on this spin lock.
So, do an unlocked check against inode size first, then if we are
at/beyond EOF, take the spinlock and recheck. This makes the
spinlock disappear from the overwrite fastpath.
I'd like to report that fixing this makes things go faster. It
doesn't - it just exposes the the XFS_ILOCK as the next severe
contention point doing extent mapping lookups, and that now burns
all the 14 CPUs this spinlock was burning.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_bmap_set_attrforkoff is only used inside of xfs_bmap.c, so mark it
static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Variable busy is set to false, but this value is never read as it is
overwritten or not used later on, hence it is a redundant assignment
and can be removed.
Clean up the following clang-analyzer warning:
fs/xfs/libxfs/xfs_alloc.c:1679:2: warning: Value stored to 'busy' is
never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Variable 'xfs_agf_buf_ops', 'xfs_agi_buf_ops', 'xfs_dquot_buf_ops' and
'xfs_symlink_buf_ops' are declared twice, so sort these variables
alphabetically and remove the repeated declaration.
Cc: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Almost unused, gets rid of another typedef.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Unlinked lists are held in the perag, and freeing of inodes needs to
be passed a perag, too, so look up the perag early in the unlink
processing and use it throughout.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Because it's a mess.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that we've internalised the two-phase inode allocation, we can
now easily make the AG selection and allocation atomic from the
perspective of a single perag context. This will ensure AGs going
offline/away cannot occur between the selection and allocation
steps.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This is just a simple wrapper around the per-ag inode allocation
that doesn't need to exist. The internal mechanism to select and
allocate within an AG does not need to be exposed outside
xfs_ialloc.c, and it being exposed simply makes it harder to follow
the code and simplify it.
This is simplified by internalising xf_dialloc_select_ag() and
xfs_dialloc_ag() into a single xfs_dialloc() function and then
xfs_dir_ialloc() can go away.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
xfs_dialloc_select_ag() does a lot of repetitive work. It first
calls xfs_ialloc_ag_select() to select the AG to start allocation
attempts in, which can do up to two entire loops across the perags
that inodes can be allocated in. This is simply checking if there is
spce available to allocate inodes in an AG, and it returns when it
finds the first candidate AG.
xfs_dialloc_select_ag() then does it's own iterative walk across
all the perags locking the AGIs and trying to allocate inodes from
the locked AG. It also doesn't limit the search to mp->m_maxagi,
so it will walk all AGs whether they can allocate inodes or not.
Hence if we are really low on inodes, we could do almost 3 entire
walks across the whole perag range before we find an allocation
group we can allocate inodes in or report ENOSPC.
Because xfs_ialloc_ag_select() returns on the first candidate AG it
finds, we can simply do these checks directly in
xfs_dialloc_select_ag() before we lock and try to allocate inodes.
This reduces the inode allocation pass down to 2 perag sweeps at
most - one for aligned inode cluster allocation and if we can't
allocate full, aligned inode clusters anywhere we'll do another pass
trying to do sparse inode cluster allocation.
This also removes a big chunk of duplicate code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The only caller of xfs_dialloc_select_ag() will always return
-ENOSPC to it's caller if the agbp returned from
xfs_dialloc_select_ag() is NULL. IOWs, failure to find a candidate
AGI we can allocate inodes from is always an ENOSPC condition, so
move this logic up into xfs_dialloc_select_ag() so we can simplify
the return logic in this function.
xfs_dialloc_select_ag() now only ever returns 0 with a locked
agbp, or an error with no agbp.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that everything passes a perag, the agno is not needed anymore.
Convert all the users to use pag->pag_agno instead and remove the
agno from the cursor. This was largely done as an automated search
and replace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Which will eventually completely replace the agno in it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Needs a [from, to] ranged AG walk, and the perag to be stuffed into
the info structure for callouts to use.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We currently pass an agno from the AG reservation functions to the
individual feature accounting functions, which in future may have to
do perag lookups to access per-AG state. Instead, pre-emptively
plumb the perag through from the highest AG reservation layer to the
feature callouts so they won't have to look it up again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
All of the callers of the busy extent API either have perag
references available to use so we can pass a perag to the busy
extent functions rather than having them have to do unnecessary
lookups.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Clean up the last external manual AG walk.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Rather than manually walking the ags and passing agnunbers around,
pass the perag for the AG we are currently working on around in the
iwalk structure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Convert the raw walks to an iterator, pulling the current AG out of
pag->pag_agno instead of the loop iterator variable.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
for_each_perag_tag() is defined in xfs_icache.c for local use.
Promote this to xfs_ag.h and define equivalent iteration functions
so that we can use them to iterate AGs instead to replace open coded
perag walks and perag lookups.
We also convert as many of the straight forward open coded AG walks
to use these iterators as possible. Anything that is not a direct
conversion to an iterator is ignored and will be updated in future
commits.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Move the xfs_perag infrastructure to the libxfs files that contain
all the per AG infrastructure. This helps set up for passing perags
around all the code instead of bare agnos with minimal extra
includes for existing files.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The perag structures really need to be defined with the rest of the
AG support infrastructure. The struct xfs_perag and init/teardown
has been placed in xfs_mount.[ch] because there are differences in
the structure between kernel and userspace. Mainly that userspace
doesn't have a lot of the internal stuff that the kernel has for
caches and discard and other such structures.
However, it makes more sense to move this to libxfs than to keep
this separation because we are now moving to use struct perags
everywhere in the code instead of passing raw agnumber_t values
about. Hence we shoudl really move the support infrastructure to
libxfs/xfs_ag.[ch].
To do this without breaking userspace, first we need to rearrange
the structures and code so that all the kernel specific code is
located together. This makes it simple for userspace to ifdef out
the all the parts it does not need, minimising the code differences
between kernel and userspace. The next commit will do the move...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
They are AG functions, not superblock functions, so move them to the
appropriate location.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The superblock verifier already validates that (1 << blocklog) ==
blocksize, so use the value directly instead of doing math.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Replace some open-coded fs block unit conversions with the standard
conversion macro.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
We can use the helper function xfs_attr_node_remove_name to reduce
duplicate code in this function
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This function is no longer used, so it is safe to remove
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
This patch modifies the attr set routines to be delay ready. This means
they no longer roll or commit transactions, but instead return -EAGAIN
to have the calling routine roll and refresh the transaction. In this
series, xfs_attr_set_args has become xfs_attr_set_iter, which uses a
state machine like switch to keep track of where it was when EAGAIN was
returned. See xfs_attr.h for a more detailed diagram of the states.
Two new helper functions have been added: xfs_attr_rmtval_find_space and
xfs_attr_rmtval_set_blk. They provide a subset of logic similar to
xfs_attr_rmtval_set, but they store the current block in the delay attr
context to allow the caller to roll the transaction between allocations.
This helps to simplify and consolidate code used by
xfs_attr_leaf_addname and xfs_attr_node_addname. xfs_attr_set_args has
now become a simple loop to refresh the transaction until the operation
is completed. Lastly, xfs_attr_rmtval_remove is no longer used, and is
removed.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This patch modifies the attr remove routines to be delay ready. This
means they no longer roll or commit transactions, but instead return
-EAGAIN to have the calling routine roll and refresh the transaction. In
this series, xfs_attr_remove_args is merged with
xfs_attr_node_removename become a new function, xfs_attr_remove_iter.
This new version uses a sort of state machine like switch to keep track
of where it was when EAGAIN was returned. A new version of
xfs_attr_remove_args consists of a simple loop to refresh the
transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH
flag is used to finish the transaction where ever the existing code used
to.
Calls to xfs_attr_rmtval_remove are replaced with the delay ready
version __xfs_attr_rmtval_remove. We will rename
__xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are
done.
xfs_attr_rmtval_remove itself is still in use by the set routines (used
during a rename). For reasons of preserving existing function, we
modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is
set. Similar to how xfs_attr_remove_args does here. Once we transition
the set routines to be delay ready, xfs_attr_rmtval_remove is no longer
used and will be removed.
This patch also adds a new struct xfs_delattr_context, which we will use
to keep track of the current state of an attribute operation. The new
xfs_delattr_state enum is used to track various operations that are in
progress so that we know not to repeat them, and resume where we left
off before EAGAIN was returned to cycle out the transaction. Other
members take the place of local variables that need to retain their
values across multiple function calls. See xfs_attr.h for a more
detailed diagram of the states.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This patch basically hoists the node transaction handling around the
leaf code we just hoisted. This will helps setup this area for the
state machine since the goto is easily replaced with a state since it
ends with a transaction roll.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
This patch hoists xfs_attr_leaf_addname into the calling function. The
goal being to get all the code that will require state management into
the same scope. This isn't particularly aesthetic right away, but it is a
preliminary step to merging in the state machine code.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This patch hoists the later half of xfs_attr_node_addname into
the calling function. We do this because it is this area that
will need the most state management, and we want to keep such
code in the same scope as much as possible
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
This patch separates the first half of xfs_attr_node_addname into a
helper function xfs_attr_node_addname_find_attr. It also replaces the
restart goto with an EAGAIN return code driven by a loop in the calling
function. This looks odd now, but will clean up nicly once we introduce
the state machine. It will also enable hoisting the last state out of
xfs_attr_node_addname with out having to plumb in a "done" parameter to
know if we need to move to the next state or not.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
This patch separate xfs_attr_node_addname into two functions. This will
help to make it easier to hoist parts of xfs_attr_node_addname that need
state management
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This patch is actually the combination of patches from the previous
version (v18). Initially patch 3 hoisted xfs_attr_set_shortform, and
the next added the helper xfs_attr_set_fmt. xfs_attr_set_fmt is similar
the old xfs_attr_set_shortform. It returns 0 when the attr has been set
and no further action is needed. It returns -EAGAIN when shortform has
been transformed to leaf, and the calling function should proceed the
set the attr in leaf form.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
This patch pulls a new helper function xfs_attr_node_remove_name out
of xfs_attr_node_remove_step. This helps to modularize
xfs_attr_node_remove_step which will help make the delayed attribute
code easier to follow
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Originally we added this patch to help modularize the attr code in
preparation for delayed attributes and the state machine it requires.
However, later reviews found that this slightly alters the transaction
handling as the helper function is ambiguous as to whether the
transaction is diry or clean. This may cause a dirty transaction to be
included in the next roll, where previously it had not. To preserve the
existing code flow, we reverse apply this commit.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Rather than open coding it just before we call
_xfs_buf_free_pages(). Also, rename the function to
xfs_buf_free_pages() as the leading underscore has no useful
meaning.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Only called from one place now, so merge it into
xfs_buf_alloc_pages(). Because page array allocation is dependent on
bp->b_pages being null, always ensure that when the pages array is
freed we always set bp->b_pages to null.
Also convert the page array to use kmalloc() rather than
kmem_alloc() so we can use the gfp flags we've already calculated
for the allocation context instead of hard coding KM_NOFS semantics.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Because it's more efficient than allocating pages one at a time in a
loop.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Use the newly factored out page allocation code. This adds
automatic buffer zeroing for non-read uncached buffers.
This also allows us to greatly simply the error handling in
xfs_buf_get_uncached(). Because xfs_buf_alloc_pages() cleans up
partial allocation failure, we can just call xfs_buf_free() in all
error cases now to clean up after failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Based on a patch from Christoph Hellwig.
This splits out the heap allocation and page allocation portions of
the buffer memory allocation into two separate helper functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
large directory block size operations are assert failing because
xfs_bunmapi() is not completely removing fragmented directory blocks
like so:
XFS: Assertion failed: done, file: fs/xfs/libxfs/xfs_dir2.c, line: 677
....
Call Trace:
xfs_dir2_shrink_inode+0x1a8/0x210
xfs_dir2_block_to_sf+0x2ae/0x410
xfs_dir2_block_removename+0x21a/0x280
xfs_dir_removename+0x195/0x1d0
xfs_rename+0xb79/0xc50
? avc_has_perm+0x8d/0x1a0
? avc_has_perm_noaudit+0x9a/0x120
xfs_vn_rename+0xdb/0x150
vfs_rename+0x719/0xb50
? __lookup_hash+0x6a/0xa0
do_renameat2+0x413/0x5e0
__x64_sys_rename+0x45/0x50
do_syscall_64+0x3a/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
We are aborting the bunmapi() pass because of this specific chunk of
code:
/*
* Make sure we don't touch multiple AGF headers out of order
* in a single transaction, as that could cause AB-BA deadlocks.
*/
if (!wasdel && !isrt) {
agno = XFS_FSB_TO_AGNO(mp, del.br_startblock);
if (prev_agno != NULLAGNUMBER && prev_agno > agno)
break;
prev_agno = agno;
}
This is designed to prevent deadlocks in AGF locking when freeing
multiple extents by ensuring that we only ever lock in increasing
AG number order. Unfortunately, this also violates the "bunmapi will
always succeed" semantic that some high level callers depend on,
such as xfs_dir2_shrink_inode(), xfs_da_shrink_inode() and
xfs_inactive_symlink_rmt().
This AG lock ordering was introduced back in 2017 to fix deadlocks
triggered by generic/299 as reported here:
https://lore.kernel.org/linux-xfs/800468eb-3ded-9166-20a4-047de8018582@gmail.com/
This codebase is old enough that it was before we were defering all
AG based extent freeing from within xfs_bunmapi(). THat is, we never
actually lock AGs in xfs_bunmapi() any more - every non-rt based
extent free is added to the defer ops list, as is all BMBT block
freeing. And RT extents are not RT based, so there's no lock
ordering issues associated with them.
Hence this AGF lock ordering code is both broken and dead. Let's
just remove it so that the large directory block code works reliably
again.
Tested against xfs/538 and generic/299 which is the original test
that exposed the deadlocks that this code fixed.
Fixes: 5b094d6dac ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs/538 is assert failing with this trace when testing with
directory block sizes of 64kB:
XFS: Assertion failed: !xfs_need_iread_extents(ifp), file: fs/xfs/libxfs/xfs_bmap.c, line: 608
....
Call Trace:
xfs_bmap_btree_to_extents+0x2a9/0x470
? kmem_cache_alloc+0xe7/0x220
__xfs_bunmapi+0x4ca/0xdf0
xfs_bunmapi+0x1a/0x30
xfs_dir2_shrink_inode+0x71/0x210
xfs_dir2_block_to_sf+0x2ae/0x410
xfs_dir2_block_removename+0x21a/0x280
xfs_dir_removename+0x195/0x1d0
xfs_remove+0x244/0x460
xfs_vn_unlink+0x53/0xa0
? selinux_inode_unlink+0x13/0x20
vfs_unlink+0x117/0x220
do_unlinkat+0x1a2/0x2d0
__x64_sys_unlink+0x42/0x60
do_syscall_64+0x3a/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
This is a check to ensure that the extents have been read into
memory before we are doing a ifork btree manipulation. This assert
is bogus in the above case.
We have a fragmented directory block that has more extents in it
than can fit in extent format, so the inode data fork is in btree
format. xfs_dir2_shrink_inode() asks to remove all remaining 16
filesystem blocks from the inode so it can convert to short form,
and __xfs_bunmapi() removes all the extents. We now have a data fork
in btree format but have zero extents in the fork. This incorrectly
trips the xfs_need_iread_extents() assert because it assumes that an
empty extent btree means the extent tree has not been read into
memory yet. This is clearly not the case with xfs_bunmapi(), as it
has an explicit call to xfs_iread_extents() in it to pull the
extents into memory before it starts unmapping.
Also, the assert directly after this bogus one is:
ASSERT(ifp->if_format == XFS_DINODE_FMT_BTREE);
Which covers the context in which it is legal to call
xfs_bmap_btree_to_extents just fine. Hence we should just remove the
bogus assert as it is clearly wrong and causes a regression.
The returns the test behaviour to the pre-existing assert failure in
xfs_dir2_shrink_inode() that indicates xfs_bunmapi() has failed to
remove all the extents in the range it was asked to unmap.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warnings by replacing /* fall through */ comments,
and its variants, with the new pseudo-keyword macro fallthrough:
fs/xfs/libxfs/xfs_alloc.c:3167:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_da_btree.c:286:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_ag_resv.c:346:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_ag_resv.c:388:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_bmap_util.c:246:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_export.c:88:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_export.c:96:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_file.c:867:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_ioctl.c:562:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_ioctl.c:1548:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_iomap.c:1040:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_inode.c:852:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_log.c:2627:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_trans_buf.c:298:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/bmap.c:275:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/btree.c:48:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:85:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:138:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:698:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/dabtree.c:51:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/repair.c:951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/agheader.c:89:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The RTINHERIT bit can be set on a directory so that newly created
regular files will have the REALTIME bit set to store their data on the
realtime volume. If an extent size hint (and EXTSZINHERIT) are set on
the directory, the hint will also be copied into the new file.
As pointed out in previous patches, for realtime files we require the
extent size hint be an integer multiple of the realtime extent, but we
don't perform the same validation on a directory with both RTINHERIT and
EXTSZINHERIT set, even though the only use-case of that combination is
to propagate extent size hints into new realtime files. This leads to
inode corruption errors when the bad values are propagated.
Because there may be existing filesystems with such a configuration, we
cannot simply amend the inode verifier to trip on these directories and
call it a day because that will cause previously "working" filesystems
to start throwing errors abruptly. Note that it's valid to have
directories with rtinherit set even if there is no realtime volume, in
which case the problem does not manifest because rtinherit is ignored if
there's no realtime device; and it's possible that someone set the flag,
crashed, repaired the filesystem (which clears the hint on the realtime
file) and continued.
Therefore, mitigate this issue in several ways: First, if we try to
write out an inode with both rtinherit/extszinherit set and an unaligned
extent size hint, turn off the hint to correct the error. Second, if
someone tries to misconfigure a directory via the fssetxattr ioctl, fail
the ioctl. Third, reverify both extent size hint values when we
propagate heritable inode attributes from parent to child, to prevent
misconfigurations from spreading.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
While chasing a bug involving invalid extent size hints being propagated
into newly created realtime files, I noticed that the xfs_ioctl_setattr
checks for the extent size hints weren't the same as the ones now
encoded in libxfs and used for validation in repair and mkfs.
Because the checks in libxfs are more stringent than the ones in the
ioctl, it's possible for a live system to set inode flags that
immediately result in corruption warnings. Specifically, it's possible
to set an extent size hint on an rtinherit directory without checking if
the hint is aligned to the realtime extent size, which makes no sense
since that combination is used only to seed new realtime files.
Replace the open-coded and inadequate checks with the libxfs verifier
versions and update the code comments a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The new online shrink code exposed a gap in the per-AG reservation
code, which is that we only return ENOSPC to callers if the entire fs
doesn't have enough free blocks. Except for debugging mode, the
reservation init code doesn't ever check that there's enough free space
in that AG to cover the reservation.
Not having enough space is not considered an immediate fatal error that
requires filesystem offlining because (a) it's shouldn't be possible to
wind up in that state through normal file operations and (b) even if
one did, freeing data blocks would recover the situation.
However, online shrink now needs to know if shrinking would not leave
enough space so that it can abort the shrink operation. Hence we need
to promote this assertion into an actual error return.
Observed by running xfs/168 with a 1k block size, though in theory this
could happen with any configuration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
These ioctl definitions in xfs_fs.h are part of the userspace ABI and
were mistakenly removed during the 5.13 merge window.
Fixes: 9fefd5db08 ("xfs: convert to fileattr")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
sc->ip is the inode that's being scrubbed, which means that it's not set
for scrub types that don't involve inodes. If one of those scrubbers
(e.g. inode btrees) returns EDEADLOCK, we'll trip over the null pointer.
Fix that by reporting either the file being examined or the file that
was used to call scrub.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If a realtime allocation fails because we can't find a sufficiently
large free extent satisfying locality rules, relax the locality rules
and try again. This reduces the occurrence of short writes to realtime
files when the write size is large and the free space is fragmented.
This was originally discovered by running generic/186 with the realtime
reflink patchset and a 128k cow extent size hint, but the short write
symptoms can manifest with a 128k extent size hint and no reflink, so
apply the fix now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
xfs_bmap_rtalloc doesn't handle realtime extent files with extent size
hints larger than the rt volume's extent size properly, because
xfs_bmap_extsize_align can adjust the offset/length parameters to try to
fit the extent size hint.
Under these conditions, minlen has to be large enough so that any
allocation returned by xfs_rtallocate_extent will be large enough to
cover at least one of the blocks that the caller asked for. If the
allocation is too short, bmapi_write will return no mapping for the
requested range, which causes ENOSPC errors in other parts of the
filesystem.
Therefore, adjust minlen upwards to fix this. This can be found by
running generic/263 (g/127 or g/522) with a realtime extent size hint
that's larger than the rt volume extent size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
- Remove the now unused "io_private" field from struct iomap_ioend, for
a modest savings in memory allocation.
-----BEGIN PGP SIGNATURE-----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=vlas
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more iomap updates from Darrick Wong:
"Remove the now unused 'io_private' field from struct iomap_ioend, for
a modest savings in memory allocation"
* tag 'iomap-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: remove unused private field from ioend
- Rename the log timestamp struct.
- Remove broken transaction counter debugging that wasn't working
correctly on very old filesystems.
- Various fixes to make pre-lazysbcount filesystems work properly again.
- Fix a free space accounting problem where we neglected to consider
free space btree blocks that track metadata reservation space when
deciding whether or not to allow caller to reserve space for
a metadata update.
- Fix incorrect pagecache clearing behavior during FUNSHARE ops.
- Don't allow log writes if the data device is readonly.
-----BEGIN PGP SIGNATURE-----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=yoyk
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"Except for the timestamp struct renaming patches, everything else in
here are bug fixes:
- Rename the log timestamp struct.
- Remove broken transaction counter debugging that wasn't working
correctly on very old filesystems.
- Various fixes to make pre-lazysbcount filesystems work properly
again.
- Fix a free space accounting problem where we neglected to consider
free space btree blocks that track metadata reservation space when
deciding whether or not to allow caller to reserve space for a
metadata update.
- Fix incorrect pagecache clearing behavior during FUNSHARE ops.
- Don't allow log writes if the data device is readonly"
* tag 'xfs-5.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't allow log writes if the data device is readonly
xfs: fix xfs_reflink_unshare usage of filemap_write_and_wait_range
xfs: set aside allocation btree blocks from block reservation
xfs: introduce in-core global counter of allocbt blocks
xfs: unconditionally read all AGFs on mounts with perag reservation
xfs: count free space btree blocks when scrubbing pre-lazysbcount fses
xfs: update superblock counters correctly for !lazysbcount
xfs: don't check agf_btreeblks on pre-lazysbcount filesystems
xfs: remove obsolete AGF counter debugging
xfs: rename struct xfs_legacy_ictimestamp
xfs: rename xfs_ictimestamp_t
The only remaining user of ->io_private is the generic ioend merging
infrastructure. The only user of that is XFS, which no longer sets
->io_private or passes an associated merge callback. Remove the
unused parameter and the ->io_private field.
CC: linux-fsdevel@vger.kernel.org
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
While running generic/050 with an external log, I observed this warning
in dmesg:
Trying to write to read-only block-device sda4 (partno 4)
WARNING: CPU: 2 PID: 215677 at block/blk-core.c:704 submit_bio_checks+0x256/0x510
Call Trace:
submit_bio_noacct+0x2c/0x430
_xfs_buf_ioapply+0x283/0x3c0 [xfs]
__xfs_buf_submit+0x6a/0x210 [xfs]
xfs_buf_delwri_submit_buffers+0xf8/0x270 [xfs]
xfsaild+0x2db/0xc50 [xfs]
kthread+0x14b/0x170
I think this happened because we tried to cover the log after a readonly
mount, and the AIL tried to write the primary superblock to the data
device. The test marks the data device readonly, but it doesn't do the
same to the external log device. Therefore, XFS thinks that the log is
writable, even though AIL writes whine to dmesg because the data device
is read only.
Fix this by amending xfs_log_writable to prevent writes when the AIL
can't possible write anything into the filesystem.
Note: As for the external log or the rt devices being readonly--
xfs_blkdev_get will complain about that if we aren't doing a norecovery
mount.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
- Various minor fixes in online scrub.
- Prevent metadata files from being automatically inactivated.
- Validate btree heights by the computed per-btree limits.
- Don't warn about remounting with deprecated mount options.
- Initialize attr forks at create time if we suspect we're going to need
to store them.
- Reduce memory reallocation workouts in the logging code.
- Fix some theoretical math calculation errors in logged buffers that
span multiple discontig memory ranges but contiguous ondisk regions.
- Speedups in dirty buffer bitmap handling.
- Make type verifier functions more inline-happy to reduce overhead.
- Reduce debug overhead in directory checking code.
- Many many typo fixes.
- Begin to handle the permanent loss of the very end of a filesystem.
- Fold struct xfs_icdinode into xfs_inode.
- Deprecate the long defunct BMV_IF_NO_DMAPI_READ from the bmapx ioctl.
- Remove a broken directory block format check from online scrub.
- Fix a bug where we could produce an unnecessarily tall data fork btree
when creating an attr fork.
- Fix scrub and readonly remounts racing.
- Fix a writeback ioend log deadlock problem by dropping the behavior
where we could preallocate a setfilesize transaction.
- Fix some bugs in the new extent count checking code.
- Fix some bugs in the attr fork preallocation code.
- Refactor if_flags out of the incore inode fork data structure.
-----BEGIN PGP SIGNATURE-----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=oRKe
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"The notable user-visible addition this cycle is ability to remove
space from the last AG in a filesystem. This is the first of many
changes needed for full-fledged support for shrinking a filesystem.
Still needed are (a) the ability to reorganize files and metadata away
from the end of the fs; (b) the ability to remove entire allocation
groups; (c) shrink support for realtime volumes; and (d) thorough
testing of (a-c).
There are a number of performance improvements in this code drop: Dave
streamlined various parts of the buffer logging code and reduced the
cost of various debugging checks, and added the ability to pre-create
the xattr structures while creating files. Brian eliminated
transaction reservations that were being held across writeback (thus
reducing livelock potential.
Other random pieces: Pavel fixed the repetitve warnings about
deprecated mount options, I fixed online fsck to behave itself when a
readonly remount comes in during scrub, and refactored various other
parts of that code, Christoph contributed a lot of refactoring this
cycle. The xfs_icdinode structure has been absorbed into the (incore)
xfs_inode structure, and the format and flags handling around
xfs_inode_fork structures has been simplified. Chandan provided a
number of fixes for extent count overflow related problems that have
been shaken out by debugging knobs added during 5.12.
Summary:
- Various minor fixes in online scrub.
- Prevent metadata files from being automatically inactivated.
- Validate btree heights by the computed per-btree limits.
- Don't warn about remounting with deprecated mount options.
- Initialize attr forks at create time if we suspect we're going to
need to store them.
- Reduce memory reallocation workouts in the logging code.
- Fix some theoretical math calculation errors in logged buffers that
span multiple discontig memory ranges but contiguous ondisk
regions.
- Speedups in dirty buffer bitmap handling.
- Make type verifier functions more inline-happy to reduce overhead.
- Reduce debug overhead in directory checking code.
- Many many typo fixes.
- Begin to handle the permanent loss of the very end of a filesystem.
- Fold struct xfs_icdinode into xfs_inode.
- Deprecate the long defunct BMV_IF_NO_DMAPI_READ from the bmapx
ioctl.
- Remove a broken directory block format check from online scrub.
- Fix a bug where we could produce an unnecessarily tall data fork
btree when creating an attr fork.
- Fix scrub and readonly remounts racing.
- Fix a writeback ioend log deadlock problem by dropping the behavior
where we could preallocate a setfilesize transaction.
- Fix some bugs in the new extent count checking code.
- Fix some bugs in the attr fork preallocation code.
- Refactor if_flags out of the incore inode fork data structure"
* tag 'xfs-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (77 commits)
xfs: remove xfs_quiesce_attr declaration
xfs: remove XFS_IFEXTENTS
xfs: remove XFS_IFINLINE
xfs: remove XFS_IFBROOT
xfs: only look at the fork format in xfs_idestroy_fork
xfs: simplify xfs_attr_remove_args
xfs: rename and simplify xfs_bmap_one_block
xfs: move the XFS_IFEXTENTS check into xfs_iread_extents
xfs: drop unnecessary setfilesize helper
xfs: drop unused ioend private merge and setfilesize code
xfs: open code ioend needs workqueue helper
xfs: drop submit side trans alloc for append ioends
xfs: fix return of uninitialized value in variable error
xfs: get rid of the ip parameter to xchk_setup_*
xfs: fix scrub and remount-ro protection when running scrub
xfs: move the check for post-EOF mappings into xfs_can_free_eofblocks
xfs: move the xfs_can_free_eofblocks call under the IOLOCK
xfs: precalculate default inode attribute offset
xfs: default attr fork size does not handle device inodes
xfs: inode fork allocation depends on XFS_IFEXTENT flag
...
The final parameter of filemap_write_and_wait_range is the end of the
range to flush, not the length of the range to flush.
Fixes: 46afb0628b ("xfs: only flush the unshared range in xfs_reflink_unshare")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The blocks used for allocation btrees (bnobt and countbt) are
technically considered free space. This is because as free space is
used, allocbt blocks are removed and naturally become available for
traditional allocation. However, this means that a significant
portion of free space may consist of in-use btree blocks if free
space is severely fragmented.
On large filesystems with large perag reservations, this can lead to
a rare but nasty condition where a significant amount of physical
free space is available, but the majority of actual usable blocks
consist of in-use allocbt blocks. We have a record of a (~12TB, 32
AG) filesystem with multiple AGs in a state with ~2.5GB or so free
blocks tracked across ~300 total allocbt blocks, but effectively at
100% full because the the free space is entirely consumed by
refcountbt perag reservation.
Such a large perag reservation is by design on large filesystems.
The problem is that because the free space is so fragmented, this AG
contributes the 300 or so allocbt blocks to the global counters as
free space. If this pattern repeats across enough AGs, the
filesystem lands in a state where global block reservation can
outrun physical block availability. For example, a streaming
buffered write on the affected filesystem continues to allow delayed
allocation beyond the point where writeback starts to fail due to
physical block allocation failures. The expected behavior is for the
delalloc block reservation to fail gracefully with -ENOSPC before
physical block allocation failure is a possibility.
To address this problem, set aside in-use allocbt blocks at
reservation time and thus ensure they cannot be reserved until truly
available for physical allocation. This allows alloc btree metadata
to continue to reside in free space, but dynamically adjusts
reservation availability based on internal state. Note that the
logic requires that the allocbt counter is fully populated at
reservation time before it is fully effective. We currently rely on
the mount time AGF scan in the perag reservation initialization code
for this dependency on filesystems where it's most important (i.e.
with active perag reservations).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Introduce an in-core counter to track the sum of all allocbt blocks
used by the filesystem. This value is currently tracked per-ag via
the ->agf_btreeblks field in the AGF, which also happens to include
rmapbt blocks. A global, in-core count of allocbt blocks is required
to identify the subset of global ->m_fdblocks that consists of
unavailable blocks currently used for allocation btrees. To support
this calculation at block reservation time, construct a similar
global counter for allocbt blocks, populate it on first read of each
AGF and update it as allocbt blocks are used and released.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
perag reservation is enabled at mount time on a per AG basis. The
upcoming change to set aside allocbt blocks from block reservation
requires a populated allocbt counter as soon as possible after mount
to be fully effective against large perag reservations. Therefore as
a preparation step, initialize the pagf on all mounts where at least
one reservation is active. Note that this already occurs to some
degree on most default format filesystems as reservation requirement
calculations already depend on the AGF or AGI, depending on the
reservation type.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Since agf_btreeblks didn't exist before the lazysbcount feature, the fs
summary count scrubber needs to walk the free space btrees to determine
the amount of space being used by those btrees.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Keep the mount superblock counters up to date for !lazysbcount
filesystems so that when we log the superblock they do not need
updating in any way because they are already correct.
It's found by what Zorro reported:
1. mkfs.xfs -f -l lazy-count=0 -m crc=0 $dev
2. mount $dev $mnt
3. fsstress -d $mnt -p 100 -n 1000 (maybe need more or less io load)
4. umount $mnt
5. xfs_repair -n $dev
and I've seen no problem with this patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reported-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The AGF free space btree block counter wasn't added until the
lazysbcount feature was added to XFS midway through the life of the V4
format, so ignore the field when checking. Online AGF repair requires
rmapbt, so it doesn't need the feature check.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In commit f8f2835a9c we changed the behavior of XFS to use EFIs to
remove blocks from an overfilled AGFL because there were complaints
about transaction overruns that stemmed from trying to free multiple
blocks in a single transaction.
Unfortunately, that commit missed a subtlety in the debug-mode
transaction accounting when a realtime volume is attached. If a
realtime file undergoes a data fork mapping change such that realtime
extents are allocated (or freed) in the same transaction that a data
device block is also allocated (or freed), we can trip a debugging
assertion. This can happen (for example) if a realtime extent is
allocated and it is necessary to reshape the bmbt to hold the new
mapping.
When we go to allocate a bmbt block from an AG, the first thing the data
device block allocator does is ensure that the freelist is the proper
length. If the freelist is too long, it will trim the freelist to the
proper length.
In debug mode, trimming the freelist calls xfs_trans_agflist_delta() to
record the decrement in the AG free list count. Prior to f8f28 we would
put the free block back in the free space btrees in the same
transaction, which calls xfs_trans_agblocks_delta() to record the
increment in the AG free block count. Since AGFL blocks are included in
the global free block count (fdblocks), there is no corresponding
fdblocks update, so the AGFL free satisfies the following condition in
xfs_trans_apply_sb_deltas:
/*
* Check that superblock mods match the mods made to AGF counters.
*/
ASSERT((tp->t_fdblocks_delta + tp->t_res_fdblocks_delta) ==
(tp->t_ag_freeblks_delta + tp->t_ag_flist_delta +
tp->t_ag_btree_delta));
The comparison here used to be: (X + 0) == ((X+1) + -1 + 0), where X is
the number blocks that were allocated.
After commit f8f28 we defer the block freeing to the next chained
transaction, which means that the calls to xfs_trans_agflist_delta and
xfs_trans_agblocks_delta occur in separate transactions. The (first)
transaction that shortens the free list trips on the comparison, which
has now become:
(X + 0) == ((X) + -1 + 0)
because we haven't freed the AGFL block yet; we've only logged an
intention to free it. When the second transaction (the deferred free)
commits, it will evaluate the expression as:
(0 + 0) == (1 + 0 + 0)
and trip over that in turn.
At this point, the astute reader may note that the two commits tagged by
this patch have been in the kernel for a long time but haven't generated
any bug reports. How is it that the author became aware of this bug?
This originally surfaced as an intermittent failure when I was testing
realtime rmap, but a different bug report by Zorro Lang reveals the same
assertion occuring on !lazysbcount filesystems.
The common factor to both reports (and why this problem wasn't
previously reported) becomes apparent if we consider when
xfs_trans_apply_sb_deltas is called by __xfs_trans_commit():
if (tp->t_flags & XFS_TRANS_SB_DIRTY)
xfs_trans_apply_sb_deltas(tp);
With a modern lazysbcount filesystem, transactions update only the
percpu counters, so they don't need to set XFS_TRANS_SB_DIRTY, hence
xfs_trans_apply_sb_deltas is rarely called.
However, updates to the count of free realtime extents are not part of
lazysbcount, so XFS_TRANS_SB_DIRTY will be set on transactions adding or
removing data fork mappings to realtime files; similarly,
XFS_TRANS_SB_DIRTY is always set on !lazysbcount filesystems.
Dave mentioned in response to an earlier version of this patch:
"IIUC, what you are saying is that this debug code is simply not
exercised in normal testing and hasn't been for the past decade? And it
still won't be exercised on anything other than realtime device testing?
"...it was debugging code from 1994 that was largely turned into dead
code when lazysbcounters were introduced in 2007. Hence I'm not sure it
holds any value anymore."
This debugging code isn't especially helpful - you can modify the
flcount on one AG and the freeblks of another AG, and it won't trigger.
Add the fact that nobody noticed for a decade, and let's just get rid of
it (and start testing realtime :P).
This bug was found by running generic/051 on either a V4 filesystem
lacking lazysbcount; or a V5 filesystem with a realtime volume.
Cc: bfoster@redhat.com, zlang@redhat.com
Fixes: f8f2835a9c ("xfs: defer agfl block frees when dfops is available")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYIfiiwAKCRCRxhvAZXjc
ogtMAQC+MtgJZdcH5iDHNEyI36JaWUccKRV7PdvfF1YgnXO45gD+IYxR1c/EQQyD
kh2AmqhET6jVhe9Nsob5yxduksI+ygo=
=oh/d
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.helpers.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs mapping helper updates from Christian Brauner:
"This adds kernel-doc to all new idmapping helpers and improves their
naming which was triggered by a discussion with some fs developers.
Some of the names are based on suggestions by Vivek and Al.
Also remove the open-coded permission checking in a few places with
simple helpers. Overall this should lead to more clarity and make it
easier to maintain"
* tag 'fs.idmapped.helpers.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: introduce two inode i_{u,g}id initialization helpers
fs: introduce fsuidgid_has_mapping() helper
fs: document and rename fsid helpers
fs: document mapping helpers
Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
"This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
separate method.
The interface is reasonably uniform across the filesystems that
support it and gives nice boilerplate removal"
* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
ovl: remove unneeded ioctls
fuse: convert to fileattr
fuse: add internal open/release helpers
fuse: unsigned open flags
fuse: move ioctl to separate source file
vfs: remove unused ioctl helpers
ubifs: convert to fileattr
reiserfs: convert to fileattr
ocfs2: convert to fileattr
nilfs2: convert to fileattr
jfs: convert to fileattr
hfsplus: convert to fileattr
efivars: convert to fileattr
xfs: convert to fileattr
orangefs: convert to fileattr
gfs2: convert to fileattr
f2fs: convert to fileattr
ext4: convert to fileattr
ext2: convert to fileattr
btrfs: convert to fileattr
...
Rename struct xfs_legacy_ictimestamp to struct xfs_log_legacy_timestamp
as it is a type used for logging timestamps with no relationship to the
in-core inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Rename xfs_ictimestamp_t to xfs_log_timestamp_t as it is a type used
for logging timestamps with no relationship to the in-core inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The function was renamed, so get rid of the declaration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The in-memory XFS_IFEXTENTS is now only used to check if an inode with
extents still needs the extents to be read into memory before doing
operations that need the extent map. Add a new xfs_need_iread_extents
helper that returns true for btree format forks that do not have any
entries in the in-memory extent btree, and use that instead of checking
the XFS_IFEXTENTS flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Just check for an inline format fork instead of the using the equivalent
in-memory XFS_IFINLINE flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Just check for a btree format fork instead of the using the equivalent
in-memory XFS_IFBROOT flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Stop using the XFS_IFEXTENTS flag, and instead switch on the fork format
in xfs_idestroy_fork to decide how to cleanup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Directly return from the subfunctions and avoid the error variable. Also
remove the not really needed dp local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_bmap_one_block is only called for the attribute fork. Move it to
xfs_attr.c, drop the unused whichfork argument and code only executed for
the data fork and rename the result to xfs_attr_is_leaf.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Move the XFS_IFEXTENTS check from the callers into xfs_iread_extents to
simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Use the fileattr API to let the VFS handle locking, permission checking and
conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
xfs_setfilesize() is the only remaining caller of the internal
__xfs_setfilesize() helper. Fold them into a single function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
XFS no longer attaches anthing to ioend->io_private. Remove the
unnecessary ->io_private merging code. This removes the only remaining
user of xfs_setfilesize_ioend() so remove that function as well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Open code xfs_ioend_needs_workqueue() into the only remaining
caller.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Per-inode ioend completion batching has a log reservation deadlock
vector between preallocated append transactions and transactions
that are acquired at completion time for other purposes (i.e.,
unwritten extent conversion or COW fork remaps). For example, if the
ioend completion workqueue task executes on a batch of ioends that
are sorted such that an append ioend sits at the tail, it's possible
for the outstanding append transaction reservation to block
allocation of transactions required to process preceding ioends in
the list.
Append ioend completion is historically the common path for on-disk
inode size updates. While file extending writes may have completed
sometime earlier, the on-disk inode size is only updated after
successful writeback completion. These transactions are preallocated
serially from writeback context to mitigate concurrency and
associated log reservation pressure across completions processed by
multi-threaded workqueue tasks.
However, now that delalloc blocks unconditionally map to unwritten
extents at physical block allocation time, size updates via append
ioends are relatively rare. This means that inode size updates most
commonly occur as part of the preexisting completion time
transaction to convert unwritten extents. As a result, there is no
longer a strong need to preallocate size update transactions.
Remove the preallocation of inode size update transactions to avoid
the ioend completion processing log reservation deadlock. Instead,
continue to send all potential size extending ioends to workqueue
context for completion and allocate the transaction from that
context. This ensures that no outstanding log reservation is owned
by the ioend completion worker task when it begins to process
ioends.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
A previous commit removed a call to xfs_attr3_leaf_read that
assigned an error return code to variable error. We now have
a few early error return paths to label 'out' that return
error if error is set; however error now is uninitialized
so potentially garbage is being returned. Fix this by setting
error to zero to restore the original behaviour where error
was zero at the label 'restart'.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 07120f1abd ("xfs: Add xfs_has_attr and subroutines")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Now that the scrub context stores a pointer to the file that was used to
invoke the scrub call, the struct xfs_inode pointer that we passed to
all the setup functions is no longer necessary. This is only ever used
if the caller wants us to scrub the metadata of the open file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While running a new fstest that races a readonly remount with scrub
running in repair mode, I observed the kernel tripping over debugging
assertions in the log quiesce code that were checking that the CIL was
empty. When the sysadmin runs scrub in repair mode, the scrub code
allocates real transactions (with reservations) to change things, but
doesn't increment the superblock writers count to block a readonly
remount attempt while it is running.
We don't require the userspace caller to have a writable file descriptor
to run repairs, so we have to call mnt_want_write_file to obtain freeze
protection and increment the writers count. It's ok to remove the call
to sb_start_write for the dry-run case because commit 8321ddb2fa
removed the behavior where scrub and fsfreeze fight over the buffer LRU.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Fix the weird split of responsibilities between xfs_can_free_eofblocks
and xfs_free_eofblocks by moving the chunk of code that looks for any
actual post-EOF space mappings from the second function into the first.
This clears the way for deferred inode inactivation to be able to decide
if an inode needs inactivation work before committing the released inode
to the inactivation code paths (vs. marking it for reclaim).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_inode_free_eofblocks, move the xfs_can_free_eofblocks call
further down in the function to the point where we have taken the
IOLOCK. This is preparation for the next patch, where we will need that
lock (or equivalent) so that we can check if there are any post-eof
blocks to clean out.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Default attr fork offset is based on inode size, so is a fixed
geometry parameter of the inode. Move it to the xfs_ino_geometry
structure and stop calculating it on every call to
xfs_default_attroffset().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Device inodes have a non-default data fork size of 8 bytes
as checked/enforced by xfs_repair. xfs_default_attroffset() doesn't
handle this, so lets do a minor refactor so it does.
Fixes: e6a688c332 ("xfs: initialise attr fork on inode create")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Due to confusion on when the XFS_IFEXTENT needs to be set, the
changes in e6a688c332 ("xfs: initialise attr fork on inode
create") failed to set the flag when initialising the empty
attribute fork at inode creation. Set this flag the same way
xfs_bmap_add_attrfork() does after attry fork allocation.
Fixes: e6a688c332 ("xfs: initialise attr fork on inode create")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
The pitfalls of regression testing on a machine without realising
that selinux was disabled. Only set the attr fork during inode
allocation if the attr feature bits are already set on the
superblock.
Fixes: e6a688c332 ("xfs: initialise attr fork on inode create")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
xchk_btree_check_minrecs() checks if the contents of the immediate child of a
bmbt root block can fit within the root block. This check could fail on inodes
with an attr fork since xfs_bmap_add_attrfork_btree() used to demote the
current root node of the data fork as the child of a newly allocated root node
if it found that the size of "struct xfs_btree_block" along with the space
required for records exceeded that of space available in the data fork.
xfs_bmap_add_attrfork_btree() should have used "struct xfs_bmdr_block" instead
of "struct xfs_btree_block" for the above mentioned space requirement
calculation. This commit disables the check for unoptimized (in terms of
disk space usage) data fork bmbt trees since there could be filesystems
in use that already have such a layout.
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The incore data fork of an inode stores the bmap btree root node as 'struct
xfs_btree_block'. However, the ondisk version of the inode stores the bmap
btree root node as a 'struct xfs_bmdr_block'.
xfs_bmap_add_attrfork_btree() checks if the btree root node fits inside the
data fork of the inode. However, it incorrectly uses 'struct xfs_btree_block'
to compute the size of the bmap btree root node. Since size of 'struct
xfs_btree_block' is larger than that of 'struct xfs_bmdr_block',
xfs_bmap_add_attrfork_btree() could end up unnecessarily demoting the current
root node as the child of newly allocated root node.
This commit optimizes space usage by modifying xfs_bmap_add_attrfork_btree()
to use 'struct xfs_bmdr_block' to check if the bmap btree root node fits
inside the data fork of the inode.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Use of the flag has had no effect since kernel commit 288699feca
("xfs: drop dmapi hooks"), which removed all dmapi related code, so
deprecate it.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Merge _xfs_dic2xflags into its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Move the crtime field from struct xfs_icdinode into stuct xfs_inode and
remove the now entirely unused struct xfs_icdinode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the flags2
field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the flags
field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the
forkoff field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The i_cowextsize field is only used for v3 inodes, and the i_flushiter
field is only used for v1/v2 inodes. Use a union to pack the inode a
littler better after adding a few missing guards around their usage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Clean up xfs_ioctl_setattr a bit by using XFS_B_TO_FSB.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a local xfs_mount variable, and use the XFS_FSB_TO_B helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the
flushiter field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the
cowextsize field into the containing xfs_inode structure. Also
switch to use the xfs_extlen_t instead of a uint32_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the extsize
field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the nblocks
field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the on-disk
size field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In preparation of removing the historic icinode struct, move the projid
field into the containing xfs_inode structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The xfs_icdinode structure just contains a random mix of inode field,
which are all read from the on-disk inode and mostly not looked at
before reading the inode or initializing a new inode cluster. The
only exceptions are the forkoff and blocks field, which are used
in sanity checks for freshly allocated inodes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The legacy DMAPI fields were never set by upstream Linux XFS, and have no
way to be read using the kernel APIs. So instead of bloating the in-core
inode for them just copy them from the on-disk inode into the log when
logging the inode. The only caveat is that we need to make sure to zero
the fields for newly read or deleted inodes, which is solved using a new
flag in the inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The crtime only exists for v5 inodes, so only copy it for those.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Make sure di_flags2 is always initialized. We currently get this implicitly
by clearing the dinode core on allocating the in-core inode, but that is
about to go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split looking up the dinode from xfs_imap_to_bp, which can be
significantly simplified as a result.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
A directory with one directory block which in turns consists of two or more fs
blocks is incorrectly flagged as corrupt by scrub since it assumes that
"Block" format directories have a data fork single extent spanning the file
offset range of [0, Dir block size - 1].
This commit fixes the bug by removing the incorrect check.
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs/538 can cause the following call trace to be printed when executing on a
multi-block directory configuration,
WARNING: CPU: 1 PID: 2578 at fs/xfs/libxfs/xfs_bmap.c:717 xfs_bmap_extents_to_btree+0x520/0x5d0
Call Trace:
? xfs_buf_rele+0x4f/0x450
xfs_bmap_add_extent_hole_real+0x747/0x960
xfs_bmapi_allocate+0x39a/0x440
xfs_bmapi_write+0x507/0x9e0
xfs_da_grow_inode_int+0x1cd/0x330
? up+0x12/0x60
xfs_dir2_grow_inode+0x62/0x110
? xfs_trans_log_inode+0x234/0x2d0
xfs_dir2_sf_to_block+0x103/0x940
? xfs_dir2_sf_check+0x8c/0x210
? xfs_da_compname+0x19/0x30
? xfs_dir2_sf_lookup+0xd0/0x3d0
xfs_dir2_sf_addname+0x10d/0x910
xfs_dir_createname+0x1ad/0x210
xfs_create+0x404/0x620
xfs_generic_create+0x24c/0x320
path_openat+0xda6/0x1030
do_filp_open+0x88/0x130
? kmem_cache_alloc+0x50/0x210
? __cond_resched+0x16/0x40
? kmem_cache_alloc+0x50/0x210
do_sys_openat2+0x97/0x150
__x64_sys_creat+0x49/0x70
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
This occurs because xfs_bmap_exact_minlen_extent_alloc() initializes
xfs_alloc_arg->total to xfs_bmalloca->minlen. In the context of
xfs_bmap_exact_minlen_extent_alloc(), xfs_bmalloca->minlen has a value of 1
and hence the space allocator could choose an AG which has less than
xfs_bmalloca->total number of free blocks available. As the transaction
proceeds, one of the future space allocation requests could fail due to
non-availability of free blocks in the AG that was originally chosen.
This commit fixes the bug by assigning xfs_alloc_arg->total to the value of
xfs_bmalloca->total.
Fixes: 3015196746 ("xfs: Introduce error injection to allocate only minlen size extents for files")
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
With dax enabled filesystems, a direct write operation into an existing
unwritten extent results in xfs_iomap_write_direct() zero-ing and converting
the extent into a normal extent before the actual data is copied from the
userspace buffer.
The inode extent count can increase by 2 if the extent range being written to
maps to the middle of the existing unwritten extent range. Hence this commit
uses XFS_IEXT_WRITE_UNWRITTEN_CNT as the extent count delta when such a write
operation is being performed.
Fixes: 727e1acd29 ("xfs: Check for extent overflow when trivally adding a new extent")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Removal of kmem_zone_init wrappers accidentally changed a slab cache
name from "xfs_trans" to "xf_trans". Fix this so that userspace
consumers of /proc/slabinfo and /sys/kernel/slab can find it again.
Fixes: b1231760e4 ("xfs: Remove slab init wrappers")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
per-AG resv failure after fixing up freespace is hard to test in an
effective way, so directly add an error injection path to observe
such error handling path works as expected.
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
As the first step of shrinking, this attempts to enable shrinking
unused space in the last allocation group by fixing up freespace
btree, agi, agf and adjusting super block and use a helper
xfs_ag_shrink_space() to fixup the last AG.
This can be all done in one transaction for now, so I think no
additional protection is needed.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This patch introduces a helper to shrink unused space in the last AG
by fixing up the freespace btree.
Also make sure that the per-AG reservation works under the new AG
size. If such per-AG reservation or extent allocation fails, roll
the transaction so the new transaction could cancel without any side
effects.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Allison Henderson