abbreviate variable name number_of_performance_levels
to num_of_pl in struct phm_odn_clock_levels
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The additional output are: PSTATE_SCLK and PSTATE_MCLK value
in MHz as:
300 MHz (PSTATE_SCLK)
300 MHz (PSTATE_MCLK)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can use to calculate profiling ratios when
set UMD Pstate.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: delete uncessary blank line.
Add static const modifiers to an array
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when cat pp_power_profile_mode on Vega10
NUM MODE_NAME BUSY_SET_POINT FPS USE_RLC_BUSY MIN_ACTIVE_LEVEL
0 3D_FULL_SCREEN : 70 60 1 3
1 POWER_SAVING : 90 60 0 0
2 VIDEO*: 70 60 0 0
3 VR : 70 90 0 0
4 COMPUTER : 30 60 0 6
5 CUSTOM : 0 0 0 0
the result show all the profile mode we can support and custom mode.
user can echo the num(0-4) to pp_power_profile_mode to select the profile
mode or can echo "5 value value value value" to enter CUSTOM mode.
the four parameter is set_point/FPS/USER_RLC_BUSY/MIN_ACTIVE_LEVEL.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup smio table(smio registers's address and voltage ID)
for various voltage domain.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store the voltage regulator configuration
so we can properly query the voltage
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store the voltage regulator configuration,
so we can properly query the voltage.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
show mclk info as in MHz on Cz/St as
0: 333Mhz *
1: 800Mhz
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rd the pasid from the VM code to the emit_vm_flush function and update
all implementations with the new parameter.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Makes more sense than tracing the kernel pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trace all allocated PASIDs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start to always allocate a pasid for each VM.
v2: use dev_warn when we run out of PASIDs
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free up a pasid after all fences signaled.
v2: also handle the case when we can't allocate a fence array.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we can better handle the differences for CPU based updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And rename it to struct gmc_funcs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <Samuel.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And rename it to amdgpu_gmc as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <Samuel.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No AGP support for in this driver.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <Samuel.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print that extra information on GMC v8.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print that extra information on GMC v7.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sed -i "s/pas_id/pasid/g" drivers/gpu/drm/amd/amdgpu/*.c
sed -i "s/pas_id/pasid/g" drivers/gpu/drm/amd/amdgpu/*.h
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To improve cpu read performance. This is implemented for APUs currently.
v2: Adapt to change https://lists.freedesktop.org/archives/amd-gfx/2017-October/015174.html
v3: Adapt to change "forward begin_cpu_access callback to drivers"
v4: Instead of v3, reuse drm_gem dmabuf_ops here. Also some minor fixes as suggested.
v5: only set dma_buf ops when it is valid (Samuel)
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VM support is only available for CZ and newer APUs. Trying to
enable it for dGPU will blow up in DC.
v2: Don't enable gpu_vm_support for Raven yet since it leads to
a black screen. Need to debug this further before enabling.
Change-Id: Ibe467c36affe2e7a7ee740c8d4f73027ca807178
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
CC: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if DC is enabled before allowing scanout buffers
to be pinned in system memory.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On CZ and newer APUs we can pin the fb into GART as well as VRAM.
v2: Don't enable gpu_vm_support for Raven yet since it leads to
a black screen. Need to debug this further before enabling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new register settings are needed to fix a tlb invalidation issue
when MMHUB power gating is turned on for Raven.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We assume FP16 1.0 frame buffer value maps to 80 nits.
DC changes are to make this configurable.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update dcn10_init_hw such that initialization of relevant
HW blocks for Maximus FPGA are also initialized (and not skipped).
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the timing generator hooks for configure_crc and get_crc.
Also implement is_tg_enabled, as configure_crc uses it.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interfaces in DC for per CRTC CRC configuration and fetching.
Also implement amdgpu_dm functions to hook onto DRM.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup to remove unused register definition from hw sequencer
header file since implementation moved from hw sequencer to dchubub file.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use loop find opp, use opp in stream_res.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixing regression introduced by
'Use real BE and FE index to program regs.'
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's unused since the drm_edid_to_eld cleanup
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We no longer change the plane state pointer for full updates, and as
such, we weren't setting the input transfer function and programming the
degamma registers when we are supposed to. Check for a full update, an
input TF change, or a gamma change in the update flags instead to correct
this.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to clean up resources on a stream as needed.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We've got a helper function to call dc_create_stream_for_sink and one
other place that calls it directly. Make sure we call the helper
functions always since we need to update a bunch of things in stream and
don't want to miss that.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It would be useful to know which clocks are unsupported when logging an
error message about unsupported clocks.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of some pipes are fused, pipe_idx should not
be used to program pipe regs. Instead of that, BE and FE
inst number should be used for reg index.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our APUs (Carrizo, Stoney, Raven) don't support it.
v2: Don't use is_apu as other ASICs might also not support it
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It might be good to understand why validate fails.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Proper sequence should be:
disable backlight
dp blank
disable output
edp power off
In enable accelatate mode, all the encoder and controller
are disabled, so move disable eDP to the function is the
easiest way to implement.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes the check for HDMI and dual-link DVI a bit more
straightforward.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Verify that the stream is master - and program only the slave displays
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With FBC enabled there was a potential null-deref
on topology change due to hardcorded pipe index.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When topology changed and rehook up MST display to the same DP
connector, need to take care of drm_dp_mst_port object.
Due to the topology is changed, drm_dp_mst_port and corresponding
i2c_algorithm object could be NULL in such situation.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After reworking FBC init for dynamic mem alloc
old FBC init code in DC became redundant.
Removing it.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- FBC init reworked to alloc memory based on display mode.
- Removed asic-dependencies from dm
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows Maximus emulation to more closely mirror actual silicon
execution.
* Enable pool->base.display_clock creation on Maximus.
* Enable rest of dce110_apply_ctx_to_hw on Maximus.
* Remove apply_ctx_to_hw_fpga (no longer necessary with the full
dce110_apply_ctx_to_hw enabled).
* Disable the dmcu->funcs->set_psr_wait_loop call in dce112_set_clock
for Maximus (this was the only fix-up necessary after enabling
dce110_apply_ctx_to_hw; everything else works unmodified on
Maximus).
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maximus testing now defaults to a 700 MHz emulated dispclk
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c:281:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: 620f774f46 ("drm/amdgpu: separate VMID and PASID handling")
CC: Christian König <christian.koenig@amd.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need to flush the HDP here, not invalidate the TLB.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate tlb invalidation and hdp flushing and move the HDP
flush to the caller.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed to flush and invalidate the HDP block using the CPU.
v2: use preferred register on soc15.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com> (v1)
Needed to flush and invalidate the HDP block using the CPU.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Needed to flush and invalidate the HDP block using the CPU.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Needed to flush and invalidate the HDP block using the CPU.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Needed to properly flush the HDP cache with the CPU from rather
than the GPU.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We follow the same approach as gfx8. The only changes are register
access macros.
Tested on vega10. The execution latency results fall within the expected
ranges from the polaris10 data.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: reuse the SMUThermal structure defined in pp_thermal.h
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: move the SMU7Thermal structure to newly created header file
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: new header file to hold the common SMU7Thermal structure
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Populate the hwmon temp range as part of thermal controller setup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a new callback for asic specific backends to specify the temperature ranges.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used by powerplay to update the dpm temp range structure
used to interface with hwmon.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
other parameter
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unused.
v2: squash in warning fix (Harry)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
printk format strings accepting a single subsequent argument
are shorter thus easier to read.
Instead of having format strings accepting 3 different arguments
pointing to first 3 bytes of the same buffer rewrite the format
string to accept only one argument - the buffer - with "%3ph"
specifier.
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PP_ASSERT_WITH_CODE prints a newline at the end of the message string,
so the message string does not need to include a newline explicitly.
Done using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDR7wACgkQlvcN/ahK
BwrxxAgAm3HrrSvtfFPooUsVuodl7KxUF9Mc/MzCNkakP3+Gs0PBE6pp+PhpcBT4
7WwkONTvVKgtnhoIzl8k0Xp8TrDZDWFzpDUluug2knr4nHHkksXtimnz9sfyzGHw
s5XofrV8KQe710grKvUry1VtBrlGRGchd+Xjg1bl+BONnwTmJ8c53npa+d6X0nnt
c+qlP7U9ZawIb59eSL98CuaYsH8oQcMya/jUlb96ky+mx4ugHv9J3ePYIZTqqNDq
/YY1xVhlDQx8iKx7yUp8mreHp5tBL/o3hNNmLMnPDx8jwZfKt7R9MZHH+RRhgl71
TZJmZMUmUyUntVV9NVim8GVHMyDcYQ==
=3uTU
-----END PGP SIGNATURE-----
Merge tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Add HDCP support to i915 drm driver.
* tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits)
drm/i915: fix misalignment in HDCP register def
drm/i915: Reauthenticate HDCP on failure
drm/i915: Detect panel's hdcp capability
drm/i915: Optimize HDCP key load
drm/i915: Retry HDCP bksv read
drm/i915: Connector info in HDCP debug msgs
drm/i915: Stop encryption for repeater with no sink
drm/i915: Handle failure from 2nd stage HDCP auth
drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS
drm/i915: Restore HDCP DRM_INFO when with no downstream
drm/i915: Check for downstream topology errors
drm/i915: Start repeater auth on READY/CP_IRQ
drm/i915: II stage HDCP auth for repeater only
drm/i915: Extending HDCP for HSW, BDW and BXT+
drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link
drm/i915: Only disable HDCP when it's active
drm/i915: Don't allow HDCP on PORT E/F
drm/i915: Implement HDCP for DisplayPort
drm/i915: Implement HDCP for HDMI
drm/i915: Add function to output Aksv over GMBUS
...
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDUjcACgkQlvcN/ahK
Bwp83Af8D805yWeS/rJ9pLaiaWmfuymMtZVl/IOEssElxFO4d+ya/S4HrcWJQwX6
KinIQiaytKKe3+TXhVRVVwg7nLBFXzaPey6SvFPCgSEa+Bm+b3v0Uk1ll59UfOzs
/IhwIYIvUSCqTVAccpoT8X/85JUQ3iP41RbdfbBwUtpvL+XLl/y29Pw1dtV71ZCH
I3/5zAk3odLd9LuPkyhtg+V1e8pluKlPVGZ0ElOiZ7HlKzc3ekOLNNj563LBHq8y
b2txi2+h/bfBx7PU5JfP6aOKGGameE79/3UExwW0dJJAHqU728KKs/7OaDu7w0vr
UlH0cY/Zc461ejPldXXx8hoKIxJ3bw==
=5EUv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
drm/radeon: only enable swiotlb path when need v2
drm/amdgpu: only enable swiotlb alloc when need v2
drm: add func to get max iomem address v2
drm/vc4: Expose performance counters to userspace
drm: Print the pid when debug logging an ioctl error.
drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
drm/stm: ltdc: add non-alpha color formats
drm/bridge/synopsys: dsi: Add 1.31 version support
drm/bridge/synopsys: dsi: Add read feature
drm/pl111: Support multiple endpoints on the CLCD
drm/pl111: Support variants with broken VBLANK
drm/pl111: Support variants with broken clock divider
drm/pl111: Handle the Versatile RGB/BGR565 mode
drm/pl111: Properly detect the ARM PL110 variants
drm/panel: Add support for ARM Versatile panels
drm/panel: Device tree bindings for ARM Versatile panels
drm/bridge: Rename argument from crtc to bridge
drm/crc: Add support for polling on the data fd.
drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
...
UAPI Changes:
- Userspace whitelist register GEN9_SLICE_COMMON_ECO_CHICKEN1 for GLK (Kenneth)
- Non-existent PMU counters are not placed to sysfs (Tvrtko)
- Add a note to deprecate I915_SET_COLORKEY_NONE and ignore it (Ville)
* Intel DDX never ended using it, and implementation was wonky
Core Changes:
- Moved away from struct timeval into ktime_t in prep for 2038 (Arnd)
* Merged the i915 portion through drm-tip, no core dependencies
Driver Changes:
- Base support for Icelake and Icelake PCH (Anusha, Rodrigo, Mahesh, Paulo, James, Kelvin)
- Add AUX-F port support for Cannonlake (Rodrigo)
- New DMC firmware for 1.07 Cannonlake (Anusha)
* Go to linux-firmware.git to get it
- Reject non-cursor planes nearly (3 px) out of screen on GLK/CNL (Imre)
- Y/Yf modifiers restored for SKL+ sprites (Ville)
- Compressed framebuffer support for sprites (Ville)
- Tune down overly aggressive shrinking (Chris)
- Shrink kmem caches when GPU is idle (Chris)
- EDID bit-banging fallback for HDMI EDID (Stefan)
- Don't boost the GPU when the waited request is already running (Chris)
- Avoid GLK/BXT CDCLK frequency locking timeouts (Imre)
- Limit DP link rate according to VBT on CNL+ (Jani)
- Skip post-reset request emission if the engine is not idle (Chris)
- Report any link training error on a fixed eDP panel as errors (Manasi)
- DSI panel fixes for Bay Trail (Hans)
- Selftest additions and improvements (Chris, Matt)
- DMA fence test additions and accompanying fixes (Chris)
- Power domain vs. register access fix (Maarten)
- Squelch warnings for people with teensy framebuffers (stride < 512) (Maarten)
- Increase Render/Media power gating hysteresis for Gen9+ (Chris)
- HDMI vswing display workaround for Gen9+ (Ville)
- GuC code cleanup and lockdep fixes (Sagar, Michal Wa.)
- Continuously run hangcheck for simplicity (Chris)
- Execlist debugging improvements (Chris)
- GuC debugging improvements (Sujaritha, Michal Wa., Sagar)
- Command parser boundary checks (Michal Srb)
- Add a workaround for 3DSTATE_SAMPLE_PATTERN on CNL (Rafael)
- Fix PMU enabling race condition (Tvrtko)
- Usual smaller testing and debugging improvements
* tag 'drm-intel-next-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel: (158 commits)
drm/i915: Update DRIVER_DATE to 20180207
drm/i915/pmu: Fix PMU enable vs execlists tasklet race
drm/i915/cnl: WaPipeControlBefore3DStateSamplePattern
drm/i915/cmdparser: Do not check past the cmd length.
drm/i915/cmdparser: Check reg_table_count before derefencing.
drm/i915: Deprecate I915_SET_COLORKEY_NONE
drm/i915: Skip post-reset request emission if the engine is not idle
drm/i915/execlists: Move the reset bits to a more natural home
drm/i915/selftests: Use a sacrificial context for hang testing
drm/i915/selftests: Flush old resets between engines
drm/i915/breadcrumbs: Drop request reference for the signaler thread
drm/i915: Remove unbannable context spam from reset
drm/i915/execlists: Remove the startup spam
drm/i915: Show the GPU state when declaring wedged
drm/i915: Always update the no_fbc_reason when disabling
drm/i915: Add some newlines to intel_engine_dump() headers
drm/i915: Report if an unbannable context is involved in a GPU hang
drm/i915: Remove spurious DRM_ERROR for cancelled interrupts
drm/i915/execlists: Flush GTIIR on clearing CS interrupts during reset
drm/i915: reduce indent in pch detection
...
swiotlb expands our card accessing range, but its path always is slower
than ttm pool allocation.
So add condition to use it.
v2: move a bit later
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-3-david1.zhou@amd.com
get the max io mapping address of system memory to see if it is over
our card accessing range.
v2: move checking later
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-2-david1.zhou@amd.com
it will be used to check if the driver needs swiotlb
v2: Don't use inline, instead, move function to drm_memory.c (Michel Daenzer <michel@daenzer.net>)
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-1-david1.zhou@amd.com
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The V3D engine has various hardware counters which might be interesting
to userspace performance analysis tools.
Expose new ioctls to create/destroy a performance monitor object and
query the counter values of this perfmance monitor.
Note that a perfomance monitor is given an ID that is only valid on the
file descriptor it has been allocated from. A performance monitor can be
attached to a CL submission and the driver will enable HW counters for
this request and update the performance monitor values at the end of the
job.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112090926.12538-1-boris.brezillon@free-electrons.com
When we debug print what ioctl we're calling into, we include the pid.
If you have multiple processes rendering simulataneously, the error
return also needs the pid so you can see which of the ioctl calls was
the one to fail.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130215643.11016-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----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=857C
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16-part2-fixes' of git://people.freedesktop.org/~airlied/linux
Pull more drm updates from Dave Airlie:
"Ben missed sending his nouveau tree, but he really didn't have much
stuff in it:
- GP108 acceleration support is enabled by "secure boot" support
- some clockgating work on Kepler, and bunch of fixes
- the bulk of the diff is regenerated firmware files, the change to
them really isn't that large.
Otherwise this contains regular Intel and AMDGPU fixes"
* tag 'drm-for-v4.16-part2-fixes' of git://people.freedesktop.org/~airlied/linux: (59 commits)
drm/i915/bios: add DP max link rate to VBT child device struct
drm/i915/cnp: Properly handle VBT ddc pin out of bounds.
drm/i915/cnp: Ignore VBT request for know invalid DDC pin.
drm/i915/cmdparser: Do not check past the cmd length.
drm/i915/cmdparser: Check reg_table_count before derefencing.
drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing
drm/i915/gvt: Use KVM r/w to access guest opregion
drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on
drm/i915/gvt: only reset execlist state of one engine during VM engine reset
drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops
drm/amdgpu: re-enable CGCG on CZ and disable on ST
drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning
drm/nouveau/mmu: Fix trailing semicolon
drm/nouveau: Introduce NvPmEnableGating option
drm/nouveau: Add support for SLCG for Kepler2
drm/nouveau: Add support for BLCG on Kepler2
drm/nouveau: Add support for BLCG on Kepler1
drm/nouveau: Add support for basic clockgating on Kepler1
drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion
drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets
...
Hw older versions support non-alpha color formats derived
from native alpha color formats only on the primary layer.
For instance, RG16 native format without alpha works fine
on 2nd layer but XR24 (derived color format from AR24)
does not work on 2nd layer.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201104243.20726-3-philippe.cornu@st.com
ltdc supports natively some color formats with alpha (like
ARGB8888, ARGB1555, ARGB4444...). Related non-alpha formats are
supported too (ARGB8888->XRGB8888, ARGB4444->XRGB4444...) by
adjusting ltdc blending factors.
Note: Wayland/Weston requests by default the non-alpha XRGB8888
color format.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201104243.20726-2-philippe.cornu@st.com
Add support for the Synopsys DesignWare MIPI DSI version 1.31
Two registers need to be updated/added for supporting 1.31:
* PHY_TMR_CFG 0x9c (updated)
1.30 [31:24] phy_hs2lp_time
[23:16] phy_lp2hs_time
[14: 0] max_rd_time
1.31 [25:16] phy_hs2lp_time
[ 9: 0] phy_lp2hs_time
* PHY_TMR_RD_CFG 0xf4 (new)
1.31 [14: 0] max_rd_time
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206084251.303-1-philippe.cornu@st.com
for new vbt version on CFL and CNL.
GVT contains vGPU reset enhancement, which refines vGPU reset flow
and the support of virtual aperture read/write when x-no-mmap=on
is set in KVM, which is required by a test case from Redhat and
also another fix for virtual OpRegion.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJae2UHAAoJEPpiX2QO6xPKR7YH/3RuIP6U0mh6/H0nchI4TmA2
XNxkGLOaMvLRWIzTrTAsT/sHuNbABgaaNOFOVVCNqXuA8sIdShh4+S1du3xX1UuE
CeGRFv7wMxK6pd7x3pIjT+/ySC6rUejY+4HqQE8k8TFgDhxYCPLQICf9EhiCLJNy
/n5I1aU2v7PMoWnlZOj9c2Eoyl9cK9IuWOL5dZmZc48jEDwVSBPxFFqDavQTGq5X
iq/7tM/Hnf/PpJN7WLatnqeFJg6vL9216kqQa2yf2watRr5AWR+9B7b05C+BDHsg
l37ycKDCLQK7abBIKQIl4DMYzBTilUC4cCAMbfF5yetl35pzMmFfE0LFIbnpO4U=
=Fxfl
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Fix for pcode timeouts on BXT and GLK, cmdparser fixes and fixes
for new vbt version on CFL and CNL.
GVT contains vGPU reset enhancement, which refines vGPU reset flow
and the support of virtual aperture read/write when x-no-mmap=on
is set in KVM, which is required by a test case from Redhat and
also another fix for virtual OpRegion.
* tag 'drm-intel-next-fixes-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/bios: add DP max link rate to VBT child device struct
drm/i915/cnp: Properly handle VBT ddc pin out of bounds.
drm/i915/cnp: Ignore VBT request for know invalid DDC pin.
drm/i915/cmdparser: Do not check past the cmd length.
drm/i915/cmdparser: Check reg_table_count before derefencing.
drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing
drm/i915/gvt: Use KVM r/w to access guest opregion
drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on
drm/i915/gvt: only reset execlist state of one engine during VM engine reset
drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops
Update VBT defs to reflect revision 216. While at it, default the
expected child device struct size to sizeof the size rather than a
hardcoded value.
v2: Fix bit order (David)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com
(cherry picked from commit c4fb60b9ab)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A few more misc fixes for 4.16.
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: re-enable CGCG on CZ and disable on ST
drm/amdgpu: disable coarse grain clockgating for ST
drm/radeon: adjust tested variable
drm/amdgpu: remove WARN_ON when VM isn't found v2
drm/amdgpu: fix locking in vega10_ih_prescreen_iv
drm/amdgpu: fix another potential cause of VM faults
drm/amdgpu: use queue 0 for kiq ring
drm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2)
drm/ttm: fix missing parameter change for ttm_bo_cleanup_refs
The Versatile PL110 implementations use multiple endpoints:
from the PL111 port, the lines are routed through a PLD,
and from there forked so the same lines go to a VGA DAC and
an external TFT panel connector. This is discrete wireing
so there is no way to turn of one output, i.e. this is
really two endpoints, not two ports.
We model this with multiple endpoints, so we need to loop
over the available endpoints, check for panel or bridge on
each and accumulate the result before continuing.
The code already will give the panel preference over the
bridge, if present, so the output will be sent to the panel
if both a panel and a bridge is present on two endpoints
of the same port.
If they all return -EPROBE_DEFER we return -EPROBE_DEFER
as well.
If just one endpoint is present on the port, the behaviour
is the same as before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206093540.8147-5-linus.walleij@linaro.org
The early Integrator CLCD synthesized in the Integrator CP and
IM-PD1 FPGAs are broken: their vertical and next base interrupts
are not functional. Support these variants by simply disabling
the use of the vblank interrupt on these variants.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206093540.8147-4-linus.walleij@linaro.org
The early Integrator CLCD synthesized in the Integrator CP and
IM-PD1 FPGAs are broken: their clock dividers do not work
properly. Support disabling the clock divider and drive the
clock directly from the parent under these circumstances.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206093540.8147-3-linus.walleij@linaro.org
The ARM Versatile series can do RGB/BGR565 with an external
"PLD" (Programmable Logical Device). However the CLCD does not
have control bits for this, so it needs to be set into the
ordinary 16BPP mode, then the RGB/BGR565 handling of the pixel
data is handled by configuring the PLD through the external
register.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206093540.8147-2-linus.walleij@linaro.org
With a bit of refactoring we can contain the variant data for
the strange PL110 versions that is feature-incomplete PL110 for
the ARM Integrator/CP and somewhere inbetween PL110 and PL111
for the ARM Versatile AB and Versatile PB.
We also accomodate for the custom duct-taped RGB565/BGR565 support
in the Versatile variant.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206093540.8147-1-linus.walleij@linaro.org
The ARM reference designs "Versatile AB" and "Versatile PB"
contain panel connectors with autodetection of the connected
panel type. This adds a small driver utilizing the MFD syscon
look-up to read the autodetection register and set up the
corresponding panel appropriately.
In the source file there is a bit of elaboration of the
panel types and interfaces on these boards.
This was tested with the PL111 DRM driver on the ARM Versatile
AB with the IB2 daughterboard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205192013.5349-2-linus.walleij@linaro.org
If the table result is out of bounds on the array map
there is something really wrong with VBT pin so we don't
return that vbt_pin, but only return 0 instead.
This basically reverts commit 'a8e6f3888b05 ("drm/i915/cnp:
Ignore VBT request for know invalid DDC pin.")'
Also this properly fixes commit 9c3b2689d0 ("drm/i915/cnl:
Map VBT DDC Pin to BSpec DDC Pin.")
v2: Do in a way that we don't break other platforms. (Jani)
v3: Keep debug message (Jani)
v4: Don't mess with 0 mapping was noticed by Jani and
addressed with a simple solution suggested by Lucas
that makes this even simpler.
Fixes: a8e6f3888b ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")
Fixes: 9c3b2689d0 ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125222524.22059-1-rodrigo.vivi@intel.com
(cherry picked from commit 3393ce1ed8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The command MEDIA_VFE_STATE checks bits at offset +2 dwords. However, it is
possible to have MEDIA_VFE_STATE command with length = 0 + LENGTH_BIAS = 2.
In that case check_cmd will read bits from the following command, or even past
the end of the buffer.
If the offset ends up outside of the command length, reject the command.
Fixes: 351e3db2b3 ("drm/i915: Implement command buffer parsing logic")
Signed-off-by: Michal Srb <msrb@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205151745.29292-1-msrb@suse.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-2-chris@chris-wilson.co.uk
(cherry picked from commit 3aec7f871c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The find_reg function was assuming that there is always at least one table in
reg_tables. It is not always true.
In case of VCS or VECS, the reg_tables is NULL and reg_table_count is 0,
implying that no register-accessing commands are allowed. However, the command
tables include commands such as MI_STORE_REGISTER_MEM. When trying to check
such command, the find_reg would dereference NULL pointer.
Now it will just return NULL meaning that the register was not found and the
command will be rejected.
Fixes: 76ff480ec9 ("drm/i915/cmdparser: Use binary search for faster register lookup")
Signed-off-by: Michal Srb <msrb@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205142916.27092-2-msrb@suse.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-1-chris@chris-wilson.co.uk
register lookup")
(cherry picked from commit 2f265fad97)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we see sporadic timeouts during CDCLK changing both on BXT and
GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by
changing the frequency in a tight loop after blanking the display. The
upper bound for the completion time is 800us based on my tests, so
increase it from the current 500us to 2ms; with that I couldn't trigger
the problem either on BXT or GLK.
Note that timeouts happened during both the change notification and the
voltage level setting PCODE request. (For the latter one BSpec doesn't
require us to wait for completion before further HW programming.)
This issue is similar to
commit 2c7d0602c8 ("drm/i915/gen9: Fix PCODE polling during CDCLK
change notification")
but there the PCODE request does complete (as shown by the mbox
busy flag), only the reply we get from PCODE indicates a failure.
So there we keep resending the request until a success reply, here we
just have to increase the timeout for the one PCODE request we send.
v2:
- s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com
(cherry picked from commit e76019a819)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For KVMGT, the guest opregion, which is handled by VFIO, is actually a
piece of guest memory which won't be accessed by devices. So, its mfn
shouldn't be obtained through VFIO interface. This patch uses KVM r/w
interface to access the data in guest opregion.
Fix the guest opregion accessing issue when host "intel_iommu=on".
v3:
- Remove mapped flag for KVM/VFIO usage, as it's useless for KVM.
v2:
- Set the gpa correctly when invoking KVM r/w operations. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When add 'x-no-mmap=on' for vfio-pci option, aperture access in guest
is emulated. But the vgpu_aperture_rw() function take wrong offset when
do memcpy, since vgpu->gm.aperture_va is not the base of entire aperture.
This mistake cause GPU command in guest get lost and so the seqno is not
updated in engine HWSP.
This patch fix this, and it also move the emulation code to kvmgt.
Because only vfio need to emulate it. Put aperture rw to MMIO emulation
path breaks assumptions in xengt.
v2: Remove PAGE_ALIGN for size (zhenyu)
Fixes: f090a00df9 ("drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Only reset vgpu execlist state of the exact engine which gets reset
request from VM. After read context status from HWSP enabled, KMD will use
the saved CSB read pointer but not always read from MMIO. When one engine
reset happen, only the read pointer of this engine will be reset, in GVT-g
host side also need to align with this policy, otherwise VM may get wrong
CSB status after one engine reset compeleted.
v2: Split refine and fix patch, code refine(Zhenyu)
v3: Move active flag of vgpu scheduler into sched_data(Zhenyu)
Cc: Fred Gao <fred.gao@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Using per engine ops will be more flexible, here refine sub-ops(init,
clean) as per engine operation align with reset operation. This change also
will be used in next fix patch for VM engine reset.
Cc: Fred Gao <fred.gao@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ttq9
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- skip AER driver error recovery callbacks for correctable errors
reported via ACPI APEI, as we already do for errors reported via the
native path (Tyler Baicar)
- fix DPC shared interrupt handling (Alex Williamson)
- print full DPC interrupt number (Keith Busch)
- enable DPC only if AER is available (Keith Busch)
- simplify DPC code (Bjorn Helgaas)
- calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
Helgaas)
- enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
Helgaas)
- move ASPM internal interfaces out of public header (Bjorn Helgaas)
- allow hot-removal of VGA devices (Mika Westerberg)
- speed up unplug and shutdown by assuming Thunderbolt controllers
don't support Command Completed events (Lukas Wunner)
- add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
Jay Cornwall)
- expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)
- clean up PCI DMA interface usage (Christoph Hellwig)
- remove PCI pool API (replaced with DMA pool) (Romain Perier)
- deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
Kaya)
- move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)
- add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)
- remove warnings on sysfs mmap failure (Bjorn Helgaas)
- quiet ROM validation messages (Alex Deucher)
- remove redundant memory alloc failure messages (Markus Elfring)
- fill in types for compile-time VGA and other I/O port resources
(Bjorn Helgaas)
- make "pci=pcie_scan_all" work for Root Ports as well as Downstream
Ports to help AmigaOne X1000 (Bjorn Helgaas)
- add SPDX tags to all PCI files (Bjorn Helgaas)
- quirk Marvell 9128 DMA aliases (Alex Williamson)
- quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)
- fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
Cassel)
- use DMA API to get MSI address for DesignWare IP (Niklas Cassel)
- fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)
- fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)
- add support for ARTPEC-7 SoC (Niklas Cassel)
- add endpoint-mode support for ARTPEC (Niklas Cassel)
- add Cadence PCIe host and endpoint controller driver (Cyrille
Pitchen)
- handle multiple INTx status bits being set in dra7xx (Vignesh R)
- translate dra7xx hwirq range to fix INTD handling (Vignesh R)
- remove deprecated Exynos PHY initialization code (Jaehoon Chung)
- fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)
- fix NULL pointer dereference in iProc BCMA driver (Ray Jui)
- fix Keystone interrupt-controller-node lookup (Johan Hovold)
- constify qcom driver structures (Julia Lawall)
- rework Tegra config space mapping to increase space available for
endpoints (Vidya Sagar)
- simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)
- remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)
- add support for Global Fabric Manager Server (GFMS) event to
Microsemi Switchtec switch driver (Logan Gunthorpe)
- add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)
* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
...
Commit 99e48bf98d ("drm/i915: Lock out execlist tasklet while peeking
inside for busy-stats") added a tasklet_disable call in busy stats
enabling, but we failed to understand that the PMU enable callback runs
as an hard IRQ (IPI).
Consequence of this is that the PMU enable callback can interrupt the
execlists tasklet, and will then deadlock when it calls
intel_engine_stats_enable->tasklet_disable.
To fix this, I realized it is possible to move the engine stats enablement
and disablement to PMU event init and destroy hooks. This allows for much
simpler implementation since those hooks run in normal context (can
sleep).
v2: Extract engine_event_destroy. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 99e48bf98d ("drm/i915: Lock out execlist tasklet while peeking inside for busy-stats")
Testcase: igt/perf_pmu/enable-race-*
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205093448.13877-1-tvrtko.ursulin@linux.intel.com
This workaround should prevent a bug that can be hit on a context
restore. To avoid the issue, we must emit a PIPE_CONTROL with CS stall
(0x7a000004 0x00100000 0x00000000 0x00000000) followed by 12DW's of
NOOP(0x0) in the indirect context batch buffer, to ensure the engine is
idle prior to programming 3DSTATE_SAMPLE_PATTERN.
It's also not clear whether we should add those extra dwords because of
the workaround itself, or if that's just padding for the WA BB (and next
commands could come right after the PIPE_CONTROL). We keep them for now.
References: HSD#1939868
v2: More descriptive changelog and comments.
v3: Explain that PIPE_CONTROL is actually 6 dwords, and that we advance
10 more dwords because of that.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205233330.14973-1-rafael.antognolli@intel.com
The CGCG feature on Stoney is causing GFX related
issues such as freezes and blank outs.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The find_reg function was assuming that there is always at least one table in
reg_tables. It is not always true.
In case of VCS or VECS, the reg_tables is NULL and reg_table_count is 0,
implying that no register-accessing commands are allowed. However, the command
tables include commands such as MI_STORE_REGISTER_MEM. When trying to check
such command, the find_reg would dereference NULL pointer.
Now it will just return NULL meaning that the register was not found and the
command will be rejected.
Fixes: 76ff480ec9 ("drm/i915/cmdparser: Use binary search for faster register lookup")
Signed-off-by: Michal Srb <msrb@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205142916.27092-2-msrb@suse.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-1-chris@chris-wilson.co.uk
register lookup")
- initial kepler clock gating support
- atomic gamma handling fixes
- support for gp108 "secure boot" (enables acceleration, finally)
* 'linux-4.16' of git://github.com/skeggsb/linux:
drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning
drm/nouveau/mmu: Fix trailing semicolon
drm/nouveau: Introduce NvPmEnableGating option
drm/nouveau: Add support for SLCG for Kepler2
drm/nouveau: Add support for BLCG on Kepler2
drm/nouveau: Add support for BLCG on Kepler1
drm/nouveau: Add support for basic clockgating on Kepler1
drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion
drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets
drm/nouveau/kms/nv50: use "low res" lut for indexed mode
drm/nouveau/kms/nv50: prepare for double-buffered LUTs
drm/nouveau/bo: add helper functions for handling pinned+mapped buffers
drm/nouveau/fbcon: add module parameter to select bits-per-pixel
drm/nouveau/secboot/gp108: implement on top of acr_r370
drm/nouveau/secboot/r370: implement support for booting LS SEC2 ucode
drm/nouveau/secboot/r370: move a bunch of r375 stuff to a new implementation
drm/nouveau: nouveau: use correct string length
drm/nouveau/drm/nouveau/mmu: fix odd_ptr_err.cocci warnings
drm/nouveau/pmu/fuc: don't use movw directly anymore
Deprecate the silly I915_SET_COLORKEY_NONE flag. The obvious
way to disable colorkey is to just set flags to 0, which is
exactly what the intel ddx has been doing all along.
Currently when userspace sets the flags to 0, we end up in a
funny state where colorkey is disabled, but various colorkey
vs. scaling checks still consider colorkey to be enabled, and
thus we don't allow plane scaling to kick in.
In case there is some other userspace out there that actually
uses this flag (unlikely as this is an i915 specific uapi)
we'll keep on accepting it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202204231.27905-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Incase of HDCP authentication failure, HDCP spec expects
reauthentication. Hence this patch adds the reauthentications
to be compliance with spec.
v2:
do-while to for loop for simplicity. [Seanpaul]
v3:
positioning the logs effectively. [Seanpaul]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-8-git-send-email-ramalingam.c@intel.com
DP HDCP1.4 spec mandates that An can be written to panel only after
detecting the panel's hdcp capability.
For DP 0th Bit of Bcaps register indicates the panel's hdcp capability
For HDMI valid BKSV indicates the panel's hdcp capability.
For HDMI it is optional to detect the panel's hdcp capability before
An Write.
v2:
Added comments explaining the need for action [Seanpaul].
Made panel's hdcp capability detection optional for hdmi [Seanpaul].
Defined a func for reading bcaps for DP [Seanpaul].
v3:
Removed the NULL initialization [Seanpaul].
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-7-git-send-email-ramalingam.c@intel.com
HDCP key need not be cleared on each hdcp disable. And HDCP key Load
is skipped if key is already loaded.
v2:
No change. Added Reviewed-by tag.
v3:
No change.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-6-git-send-email-ramalingam.c@intel.com
HDCP specification says that when bksv is identified as invalid
(not with 20 1s), bksv should be re-read and verified.
This patch adds the above mentioned re-read for bksv.
v2:
Rephrased the commit msg [Seanpaul]
v3:
do-while to for-loop [Seanpaul]
v4:
retry only if bksv is invalid and no error msg on each attempt
[Seanpaul]
v5:
Correcting the return value [Seanpaul].
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517851922-30547-1-git-send-email-ramalingam.c@intel.com
When HDCP authentication is triggered on multiple connector, having
connector name and ID in debug message will be more informative.
v2:
Added logs with connector info at the start of en/disable [Seanpaul]
Added the connector info into Check link failure msgs too.
v3:
No Changes. Added Reviewed-by tag.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-4-git-send-email-ramalingam.c@intel.com
If a HDCP repeater is detected with zero downstream devices,
HDCP spec approves either of below actions:
1. Dont continue on second stage authentication. Disable encryption.
2. Continue with second stage authentication excluding the KSV list and
on success, continue encryption.
Since disable encryption is agreed, repeater is not expected to have its
own display. So there is no consumption of the display content in such
setup.
Hence, incase of repeater with zero device count, this patch fails the
HDCP authentication and stops the HDCP encryption.
v2:
Rephrased commit msg and added comments in code [Seanpaul]
v3:
No changes. Added Reviewed-by tag.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-3-git-send-email-ramalingam.c@intel.com
We enable the HDCP encryption as a part of first stage authentication.
So when second stage authentication fails, we need to disable the HDCP
encryption and signalling.
This patch ensures that, when hdcp authentication fails, HDCP encryption
and signalling is turned off.
v2:
Dropped connector ref passing to auth [Seanpaul]
Moved the call to disable_hdcp() to enable_hdcp() [Seanpaul]
v3:
No Changes. Added the Reveiwed-by tag.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-2-git-send-email-ramalingam.c@intel.com
The Rockchip LVDS driver fails to build after commit 23c35f48f5
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h and pinctrl/devinfo.h being pulled in by the
device.h header implicitly.
Include these headers explicitly to avoid the build failure.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 7b6da818d8 ("drm/i915: Restore the kernel context after a
GPU reset on an idle engine") we submit a request following the engine
reset. The intent is that we don't submit a request if the engine is
busy (as it will restart active by itself) but we only checked to see if
there were remaining requests in flight on the hardware and skipped
checking to see if there were any ready requests that would be
immediately submitted on restart (the same time as our new request would
be). Having convinced the engine to appear idle in the previous patch,
we can use intel_engine_is_idle() as a better test to only submit a new
request if there are no pending requests.
As it happens, this is tripping up igt/drv_selftest/live_hangcheck in CI
as we overfill the kernel_context ringbuffer trigger an infinite
recursion from within the reset.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104786
References: 7b6da818d8 ("drm/i915: Restore the kernel context after a GPU reset on an idle engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-4-chris@chris-wilson.co.uk
In preparation for the next patch, we want the engine to appear idle
after a reset (if there are no requests in flight). For execlists, this
entails clearing the active status on reset, it will be regenerated on
restarting the engine after the reset. In the process, note that a
couple of other status flags and checks could be moved into the
describing function.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-3-chris@chris-wilson.co.uk
Avoid injecting hangs in to the i915->kernel_context in case the GPU
reset leaves corruption in the context image in its wake (leading to
continual failures and system hangs after the selftests are ostensibly
complete). Use a sacrificial kernel_context instead.
v2: Closing a context is tricky; export a function (for selftests) from
i915_gem_context.c to get it right.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-2-chris@chris-wilson.co.uk
When injecting rapid resets, we must be careful to at least wait for the
previous reset to have taken effect and the engine restarted. If we
perform a second reset before that has happened, we will notice that the
engine hasn't recovered and declare it lost, wedging the device and
failing. In practice, since we wait for each hanging batch to start
before injecting the reset, this too-fast-reset condition can only be
triggered when moving onto the next engine in the test, so we need only
wait for the existing reset to complete before switching engines.
v2: Wrap up the wait inside a safety net to bail out in case of angry hw.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-1-chris@chris-wilson.co.uk
If we remember to cancel the signaler on a request when retiring it
(after we know that the request has been signaled), we do not need to
carry an additional request in the signaler itself. This prevents an
issue whereby the signaler threads may be delayed and hold on to
thousands of request references, causing severe memory fragmentation and
premature oom (most noticeable on 32b snb due to the limited GFP_KERNEL
and frequent use of inter-engine fences).
v2: Rename first_signal(), document reads outside of locks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203101914.24880-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
During testing, we trigger a lot of resets on an unbannable context
leading to massive amounts of irrelevant debug spam. Remove the
ban_score accounting and message for the unbannable context so that we
improve the signal:noise in the log messages for when the unexpected
occurs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-7-chris@chris-wilson.co.uk
Execlists is now enabled by default and included in the list of
capabilities printed out to dmesg and beyond. We do not need to mention
it again, every time we restart the engine, so kill the spam.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-6-chris@chris-wilson.co.uk
Dump each engine state when i915_gem_set_wedged() is called to give us
some more clues as to why we had to terminate the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-5-chris@chris-wilson.co.uk
This will make it possible for userspace to know whether reading
will block, without blocking on the fd. This makes it possible to
drain all queued CRC's in blocking mode, without having to reopen
the fd.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202142743.68527-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Use POLLIN|POLLRDNORM, based on Ville's suggestion]
The headers should be on a separate line for consistency, so add the
missing trailing newline in a few intel_engine_dump() callers.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205100618.11001-1-chris@chris-wilson.co.uk
Since unbannable contexts are special and supposed not to be causing GPU
hangs in the first place, make it clear when they are implicated in said
hang. In practice, most unbannable contexts are those created by igt
for the express purpose of throwing untold thousands of hangs at the GPU
and wish to keep doing so to finish the test. Normally they are cleaned
up, but it's when they or the other unbannable kernel contexts stay
stuck in an erroneous state that we need to worry and so need
highlighting.
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205094139.10671-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
As we ourselves cancel interrupts during reset by clearing the GTIIR, it
is possible for the master IIR to indicate a pending IRQ for which we
have already cleared from the GTIIR. In this case, the DRM_ERROR are
intended and should not be flagged as an error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202153448.23908-1-chris@chris-wilson.co.uk
Be paranoid and flush the GTIIR after clearing the CS interrupt to be
sure it has taken before we re-enable the interrupt handler. We still
see early interrupts following reset, the tasklet handling the mmio read
before it has been written by the CS. This hopefully reduces the
frequency to 0...
References: https://bugs.freedesktop.org/show_bug.cgi?id=104262
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202145455.29876-1-chris@chris-wilson.co.uk
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> #irc
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We're using i915_inject_load_failure() to inject dummy
faults during driver load, but since this is debug utility
we shouldn't expose it in default config as it consumes
both code and data.
add/remove: 0/1 grow/shrink: 0/2 up/down: 0/-302 (-302)
Function old new delta
__i915_inject_load_failure 61 - -61
i915_gem_init 1331 1268 -63
i915_driver_load 5923 5745 -178
Total: Before=1177454, After=1177152, chg -0.03%
add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-4 (-4)
Data old new delta
i915_load_fail_count 4 - -4
Total: Before=56762, After=56758, chg -0.01%
add/remove: 4/8 grow/shrink: 0/1 up/down: 245/-591 (-346)
RO Data old new delta
__param_str_inject_load_failure 20 - -20
__UNIQUE_ID_inject_load_failuretype200 34 - -34
__param_inject_load_failure 40 - -40
__func__ 4998 4896 -102
__UNIQUE_ID_inject_load_failure201 150 - -150
Total: Before=119095, After=118749, chg -0.29%
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201173248.3912-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We have the max DP link rate info available in VBT since BDB version
216, included in child device config since commit c4fb60b9ab
("drm/i915/bios: add DP max link rate to VBT child device
struct"). Parse it and use it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8b1364d1f2394fba3062b6ad11b474744ea4366.1517482774.git.jani.nikula@intel.com
Make the limiting rate based instead of messing with the array size.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cb03b9419191a7d6359bf371aacb2d3725c746de.1517482774.git.jani.nikula@intel.com
This will be useful later on. Also move the functions around to not need
forward declarations in subsequent patches. No functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/40f37f08cad33234cd86337d39e823ac6e55805f.1517482774.git.jani.nikula@intel.com
gcc thinks that interpreting a multiplication result as a bool
is confusing:
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c: In function 'read_pll':
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:133:8: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
Adding a temporary variable to contain the divisor helps make
it clear what is going on and avoids that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds the NvPmEnableGating config option to nouveau, which can be
used to enable or disable clockgating for supported chipsets. Enabling
can be done by passing
config=NvPmEnableGating=1
To nouveau. If your chipset supports it, you'll see a message in your
kernel log indicating that clockgating is enabled. Since clockgating has
only had limited testing thus far, we leave this option disabled by
default for now.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
That's right, there's still more power saving to go! Starting with
kepler 2, nvidia hardware has an additional level of clockgating known
as second level clockgating. The details of this are not exact, but it
seems to work by waiting for a collection of dependent hardware blocks
to be gated before taking affect. As with the previous series, this
results in another noticeable drop in power consumption and is
programmed in the same manner.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Same as the previous patch, but for Kepler2 now
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This enables BLCG optimization for kepler1. When using clockgating,
nvidia's firmware has a set of registers which are initially programmed
by the vbios with various engine delays and other mysterious settings
that are safe enough to bring up the GPU. However, the values used by
the vbios are more power hungry then they need to be, so the nvidia driver
writes it's own more optimized set of BLCG settings before enabling
CG_CTRL. This adds support for programming the optimized BLCG values
during engine/subdev init, which enables rather significant power
savings.
This introduces the nvkm_therm_clkgate_init() helper, which we use to
program the optimized BLCG settings before enabling clockgating with
nvkm_therm_clkgate_enable.
As well, this commit shares a lot more code with Fermi since BLCG is
mostly the same there as far as we can tell. In the future, it's likely
we'll reformat the clkgate_packs for kepler1 so that they share a list
of mmio packs with Fermi.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds support for enabling automatic clockgating on nvidia GPUs for
Kepler1. While this is not technically a clockgating level, it does
enable clockgating using the clockgating values initially set by the
vbios (which should be safe to use).
This introduces two therm helpers for controlling basic clockgating:
nvkm_therm_clkgate_enable() - enables clockgating through
CG_CTRL, done after initializing the GPU fully
nvkm_therm_clkgate_fini() - prepares clockgating for suspend or
driver unload
A lot of this code was originally going to be based off of fermi;
however it turns out that while Fermi's the first line of GPUs that
introduced this kind of power saving, Fermi requires more fine tuned
control of the CG_CTRL registers from the driver while reclocking that
we don't entirely understand yet.
For the simple parts we will be sharing with Fermi for certain however,
we at least add those into a new subdev/therm/gf100.h header.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We've still been directly using the legacy crtc gamma_set() hook even
after conversion to atomic modesetting.
For userspace clients this was fine, however, fbcon will use the atomic
property when it's running on an atomic driver, which means we miss its
colormap updates - which is particularly bad for 8bpp framebuffers!
This commit converts the driver to use the atomic property + the helper
function implementing the legacy hook on top of atomic.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For some reason forgotten by history, we've been using a 1025-entry LUT
mode, and sparsely filling it with the 256-entry LUT we're handed.
Until we land support for the full atomic colour management properties,
this commit switches to using the 257-entry mode to fix colour mapping
with depth 30 framebuffers.
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is what was done prior to the big refactor in kernel 3.8, and what
was done by xf86-video-nv. Experimentally, it seems like there's some
sort of issue with the high-res lut to be used there. Tested on G92.
This ends up mattering because fbcon/fbdev chooses the C8 fb format for
low-vram systems, which can occur with some IGP-based configurations
with little "stolen" vram.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It's entirely possibly that the other r375 code is relevant to r370 too,
but I've not confirmed this, so I'll leave it where it is for now.
NVIDIA's copyright headers maintained, as it's still all their code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>
gcc-8 reports
drivers/gpu/drm/nouveau/nvkm/engine/pm/base.c: In function 'nvkm_perfmon_mthd':
include/linux/string.h:265:9: error: '__builtin_strncpy' specified bound 64 equals destination size [-Werror=stringop-truncation]
We need one less byte or call strlcpy() to make it a
nul-terminated string.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The kbuild test bot complained about a new coccinelle warning nearby,
which sparked a discussion about the assignment to 'memory' inside of
the conditional expression. See Link below for the original post.
Fix the assignment to silence the coccinelle warning and also make the
code look a little nicer.
Link: https://lists.freedesktop.org/archives/nouveau/2017-November/029242.html
Signed-off-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes failure to compile with recent envyas as a result of the 'movw'
alias being removed for v5.
A bit of history:
v3 only has a 16-bit sign-extended immediate mov op. In order to set
the high bits, there's a separate 'sethi' op. envyas validates that
the value passed to mov(imm) is between -0x8000 and 0x7fff. In order
to simplify macros that load both the low and high word, a 'movw'
alias was added which takes an unsigned 16-bit immediate. However the
actual hardware op still sign extends.
v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op
is gone (loads 0 into the dst reg). However due to a bug in envyas,
the movw alias still existed, and selected the no-longer-present v3
16-bit immediate mov op. As a result usage of movw on v5 is the same
as mov with a 0x0 argument.
The proper fix throughout is to only ever use the 'movw' alias in
combination with 'sethi'. Anything else should get the sign-extended
validation to ensure that the intended value ends up in the
destination register.
Changes in fuc3 binaries is the result of a different encoding being
selected for a mov with an 8-bit value.
v2: added commit message written by Ilia, thanks for that!
v3: messed up rebasing, now it should apply
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
to the clk rate protection support added by Jerome Brunet. This feature
will allow consumers to lock in a certain rate on the output of a clk so
that things like audio playback don't hear pops when the clk frequency
changes due to shared parent clks changing rates. Currently the clk
API doesn't guarantee the rate of a clk stays at the rate you request
after clk_set_rate() is called, so this new API will allow drivers
to express that requirement. Beyond this, the core got some debugfs
pretty printing patches and a couple minor non-critical fixes.
Looking outside of the core framework diff we have some new driver
additions and the removal of a legacy TI clk driver. Both of these hit
high in the dirstat. Also, the removal of the asm-generic/clkdev.h file
causes small one-liners in all the architecture Kbuild files. Overall, the
driver diff seems to be the normal stuff that comes all the time to
fix little problems here and there and to support new hardware.
Core:
- Clk rate protection
- Symbolic clk flags in debugfs output
- Clk registration enabled clks while doing bookkeeping updates
New Drivers:
- Spreadtrum SC9860
- HiSilicon hi3660 stub
- Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
- Amlogic Meson-AXG
- ASPEED BMC
Removed Drivers:
- TI OMAP 3xxx legacy clk (non-DT) support
- asm*/clkdev.h got removed (not really a driver)
Updates:
- Renesas FDP1-0 module clock on R-Car M3-W
- Renesas LVDS module clock on R-Car V3M
- Misc fixes to pr_err() prints
- Qualcomm MSM8916 audio fixes
- Qualcomm IPQ8074 rounded out support for more peripherals
- Qualcomm Alpha PLL variants
- Divider code was using container_of() on bad pointers
- Allwinner DE2 clks on H3
- Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
- Mediatek clk driver compile test support
- AT91 PMC clk suspend/resume restoration support
- PLL issues fixed on si5351
- Broadcom IProc PLL calculation updates
- DVFS support for Armada mvebu CPU clks
- Allwinner fixed post-divider support
- TI clkctrl fixes and support for newer SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=bGPp
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework has a handful of patches this time around, mostly
due to the clk rate protection support added by Jerome Brunet.
This feature will allow consumers to lock in a certain rate on the
output of a clk so that things like audio playback don't hear pops
when the clk frequency changes due to shared parent clks changing
rates. Currently the clk API doesn't guarantee the rate of a clk stays
at the rate you request after clk_set_rate() is called, so this new
API will allow drivers to express that requirement.
Beyond this, the core got some debugfs pretty printing patches and a
couple minor non-critical fixes.
Looking outside of the core framework diff we have some new driver
additions and the removal of a legacy TI clk driver. Both of these hit
high in the dirstat. Also, the removal of the asm-generic/clkdev.h
file causes small one-liners in all the architecture Kbuild files.
Overall, the driver diff seems to be the normal stuff that comes all
the time to fix little problems here and there and to support new
hardware.
Summary:
Core:
- Clk rate protection
- Symbolic clk flags in debugfs output
- Clk registration enabled clks while doing bookkeeping updates
New Drivers:
- Spreadtrum SC9860
- HiSilicon hi3660 stub
- Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
- Amlogic Meson-AXG
- ASPEED BMC
Removed Drivers:
- TI OMAP 3xxx legacy clk (non-DT) support
- asm*/clkdev.h got removed (not really a driver)
Updates:
- Renesas FDP1-0 module clock on R-Car M3-W
- Renesas LVDS module clock on R-Car V3M
- Misc fixes to pr_err() prints
- Qualcomm MSM8916 audio fixes
- Qualcomm IPQ8074 rounded out support for more peripherals
- Qualcomm Alpha PLL variants
- Divider code was using container_of() on bad pointers
- Allwinner DE2 clks on H3
- Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
- Mediatek clk driver compile test support
- AT91 PMC clk suspend/resume restoration support
- PLL issues fixed on si5351
- Broadcom IProc PLL calculation updates
- DVFS support for Armada mvebu CPU clks
- Allwinner fixed post-divider support
- TI clkctrl fixes and support for newer SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: aspeed: Handle inverse polarity of USB port 1 clock gate
clk: aspeed: Fix return value check in aspeed_cc_init()
clk: aspeed: Add reset controller
clk: aspeed: Register gated clocks
clk: aspeed: Add platform driver and register PLLs
clk: aspeed: Register core clocks
clk: Add clock driver for ASPEED BMC SoCs
clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
clk: fix reentrancy of clk_enable() on UP systems
clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
clk: Simplify debugfs registration
clk: Fix debugfs_create_*() usage
clk: Show symbolic clock flags in debugfs
clk: renesas: r8a7796: Add FDP clock
clk: Move __clk_{get,put}() into private clk.h API
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
clk: Improve flags doc for of_clk_detect_critical()
arch: Remove clkdev.h asm-generic from Kbuild
clk: sunxi-ng: a83t: Add M divider to TCON1 clock
clk: Prepare to remove asm-generic/clkdev.h
...
- Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)
- Capability helper cleanup (Alex Williamson)
- Allow mmaps overlapping MSI-X vector table with region capability
exposing this feature (Alexey Kardashevskiy)
- mdev static cleanups (Xiongwei Song)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=Ww3n
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)
- Capability helper cleanup (Alex Williamson)
- Allow mmaps overlapping MSI-X vector table with region capability
exposing this feature (Alexey Kardashevskiy)
- mdev static cleanups (Xiongwei Song)
* tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio:
vfio: mdev: make a couple of functions and structure vfio_mdev_driver static
vfio-pci: Allow mapping MSIX BAR
vfio: Simplify capability helper
vfio-pci: Mask INTx if a device is not capabable of enabling it
There is no requirement for doing the PCODE request polling atomically,
so do that only for a short time switching to sleeping poll afterwards.
The specification requires a 150usec timeout for the change notification,
so let's use that for the atomic poll. Do the extra 2ms poll - needed as
a workaround on BXT/GLK - in sleeping mode.
v2:
- rebase on v2 of patchset dropping the sandybridge_pcode_read/write
refactoring (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-2-imre.deak@intel.com
Currently we see sporadic timeouts during CDCLK changing both on BXT and
GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by
changing the frequency in a tight loop after blanking the display. The
upper bound for the completion time is 800us based on my tests, so
increase it from the current 500us to 2ms; with that I couldn't trigger
the problem either on BXT or GLK.
Note that timeouts happened during both the change notification and the
voltage level setting PCODE request. (For the latter one BSpec doesn't
require us to wait for completion before further HW programming.)
This issue is similar to
commit 2c7d0602c8 ("drm/i915/gen9: Fix PCODE polling during CDCLK
change notification")
but there the PCODE request does complete (as shown by the mbox
busy flag), only the reply we get from PCODE indicates a failure.
So there we keep resending the request until a success reply, here we
just have to increase the timeout for the one PCODE request we send.
v2:
- s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
Previously, we relied on only running the hangcheck while somebody was
waiting on the GPU, in order to minimise the amount of time hangcheck
had to run. (If nobody was watching the GPU, nobody would notice if the
GPU wasn't responding -- eventually somebody would care and so kick
hangcheck into action.) However, this falls apart from around commit
4680816be3 ("drm/i915: Wait first for submission, before waiting for
request completion"), as not all waiters declare themselves to hangcheck
and so we could switch off hangcheck and miss GPU hangs even when
waiting under the struct_mutex.
If we enable hangcheck from the first request submission, and let it run
until the GPU is idle again, we forgo all the complexity involved with
only enabling around waiters. We just have to remember to be careful that
we do not declare a GPU hang when idly waiting for the next request to
be come ready, as we will run hangcheck continuously even when the
engines are stalled waiting for external events. This should be true
already as we should only be tracking requests submitted to hardware for
execution as an indicator that the engine is busy.
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129144104.3921-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 889230489b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case of eDP because the panel has a fixed mode, the link rate
and lane count at which it is trained corresponds to the link BW
required to support the native resolution of the panel. In case of
panles with lower resolutions where fewer lanes are hooked up internally,
that number is reflected in the MAX_LANE_COUNT DPCD register of the panel.
So it is pointless to fallback to lower link rate/lane count in case
of link training failure on eDP connector since the lower link BW
will not support the native resolution of the panel and we cannot
prune the preferred mode on the eDP connector.
In case of Link training failure on the eDP panel, something is wrong
in the HW internally and hence driver errors out with a loud
and clear DRM_ERROR message.
v2:
* Fix the DEBUG_ERROR and add {} in else (Ville Syrjala)
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=103369
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507835618-23051-1-git-send-email-manasi.d.navare@intel.com
(cherry picked from commit c0cfb10d9e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We may have fused or unused pipes in our system. Let's check that the pipe
in question is within limits of accessible pipes. In case, that we are not
able to access the pipe, we return early with a warning.
v2: Rephrasing of the commit message (Jani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jaswinder Singh Rajput <jaswinder@perfectintelligent.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513584243-12607-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit 0b7029b7e4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
As we attempt to allocate pages for use in a new WC stash, direct
reclaim may run underneath us and fill up the WC stash. We have to be
careful then not to overflow the pvec.
Fixes: 66df1014ef ("drm/i915: Keep a small stash of preallocated WC pages")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103109
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180121173143.17090-1-chris@chris-wilson.co.uk
(cherry picked from commit 073cd78166)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since commit 4e773c3a8a ("drm/i915: Wire up shrinkctl->nr_scanned"),
we track the number of objects we scan and do not wish to exceed that as
it will overly penalise our own slabs under mempressure. Given that we
now know the target number of objects to scan, use that as our guide for
deciding to shrink as opposed to the number of objects we manage to
shrink (which doesn't correspond to the numbers we report to shrinkctl).
Fixes: 4e773c3a8a ("drm/i915: Wire up shrinkctl->nr_scanned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115212455.24046-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 29d384e34c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stop gvt scheduler timer if no vGPU exists, otherwise it keeps
gvt service thread busy to handle request schedule event but no
actual schedule activity required.
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stop irq timer for virtual vblank timer emulation if no vGPU exists,
otherwise it will keep gvt service thread busy to handle virtual vblank
but no use.
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
According to commit (319c933c71)
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 15 00:02:46 2013 +0200
drm/prime: proper locking+refcounting for obj->dma_buf link
obj->dma_buf link should be reinstated at import time.
Gvt-g dma-buf buffer exposeing might be simpler, as there won't be much
racing during Gvt-g dma-buf exposing. In other words, Gvt-g dma-buf
exposing can guarantee exposing happens before gem close ioctl, and Gvt-g
is the only exporter of the guest framebuffer.
But following the drm prime scheme can give Gvt-g a chance to increase a
dma-buf reference count during importing. Otherwise, we have to increase
the reference during exposing, which will break the case that the only
reference userspace has held was through the dma-buf fd and the reference
count is one.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Hang Yuan <hang.yuan@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have a hole in our busy-stat accounting if the pmu is enabled during
a long running batch, the pmu will not start accumulating busy-time
until the next context switch. This then fails tests that are only
sampling a single batch.
v2: Count each active port just once (context in/out events are only on
the first and last assignment to a port).
v3: Avoid hardcoding knowledge of 2 submission ports
Fixes: 30e17b7847 ("drm/i915: Engine busy time tracking")
Testcase: igt/perf_pmu/busy-start
Testcase: igt/perf_pmu/busy-double-start
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111073031.14614-1-chris@chris-wilson.co.uk
(cherry picked from commit 4900727d35)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This register does not contain it. Instead, we have to look into FAULT_TLB_DATA0 & 1
(where, by the way, we can also get the address space).
v2: Right formatting
v3:
- Use 12 (as per the register format) instead of PAGE_SIZE (Chris)
- s/BITS_44_TO_47/HIGHBITS (Chris)
- Right formatting, this time for real
Fixes: b03ec3d67a ("drm/i915: There is only one fault register from GEN8 onwards")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1513982329-32191-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 5a3f58dfd1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While moving code around for solving lockdep issue for GuC log relay,
spotted that uc_fini_wq is not being called in failure path in gem_init.
Missed in the below commit. Add it.
v2: Removed GEM_BUG_ON(!HAS_GUC()) from intel_uc_fini_wq as init happens
only based on enable_guc module parameter and does not consider has_guc
capability. (Michal)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Fixes: 3176ff49bc ("drm/i915/guc: Move GuC workqueue allocations outside of the mutex")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515588857-10283-1-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit da943b5ab0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The power domain masks are 64 bit wide, so we need BIT_ULL() when
setting bits in them, these ones were missed during converting from 32
to 64 bit masks. All 3 enums are <32 atm, so this didn't cause a real
problem.
Fixes: d8fc70b736 ("drm/i915: Make power domain masks 64 bit long")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109122040.19425-1-imre.deak@intel.com
(cherry picked from commit 17bd6e66d8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The ACK/NACK implementation as found in e.g. the G965 has the falling
clock edge and the release of the data line after the ACK for the received
byte happen at the same time.
This is conformant with the I2C specification, which allows a zero hold
time, see footnote [3]: "A device must internally provide a hold time of
at least 300 ns for the SDA signal (with respect to the V IH(min) of the
SCL signal) to bridge the undefined region of the falling edge of SCL."
Some HDMI-to-VGA converters apparently fail to adhere to this requirement
and latch SDA at the falling clock edge, so instead of an ACK
sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the
transfer.
The bitbanging releases the data line for the ACK only 1/4 bit time after
the falling clock edge, so a slave will see the correct value no matter
if it samples at the rising or the falling clock edge or in the center.
Fallback to bitbanging is already done for the CRT connector.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de
(cherry picked from commit cfb926e148)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The mocs reg array is defined locally but then we iterate over its
elements using I915_NUM_ENGINES. There is no 'hard' connection between
I915_NUM_ENGINES and the regs array and there will be problems if either
of them increases.
Use the size of the mocs reg array instead to safely iterate over it.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GVT may receive partial write on one guest PTE update. Validate gfn
not to translate incomplete gfn. This avoids some unnecessary error
messages incurred by the incomplete gfn translating. Also fix the
bug that the whole PPGTT shadow page update is aborted on any invalid
gfn entry.
gfn validation relys on hypervisor's help. Add one MPT module function
to provide the function.
Signed-off-by: Hang Yuan <hang.yuan@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Running 4.15 Linux kernel in VM will cause host GVT reports
'untrack mmio 0x701a0' errror, which identifies the PLANE_KEYMAX
registers. Add them to track list.
v2: rebase to latest staging code.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
while(mmio++) increase mmio to next, mmio[0] never take effect
in while loop.
This patch change while to for and fix the above issue.
v2: Correct Fixes format.(Zhenyu)
v3: Rebase to latest staging.(Zhenyu)
Fixes: 83164886e455("drm/i915/gvt: Select appropriate mmio list at initialization time")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since
commit b8e2b0199c
Author: Peter Rosin <peda@axentia.se>
Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.
Fixes: b8e2b0199c ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <peda@axenita.se>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Cc: Bill Fraser <bill.fraser@gmail.com>
Reported-and-Tested-by: Bill Fraser <bill.fraser@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
another one when waiting for timeouts on reservation objects.
-----BEGIN PGP SIGNATURE-----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=h8qb
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
This contains a fix to restrict what lessee can do with masters and
another one when waiting for timeouts on reservation objects.
* tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Check for lessee in DROP_MASTER ioctl
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
Pull misc vfs updates from Al Viro:
"All kinds of misc stuff, without any unifying topic, from various
people.
Neil's d_anon patch, several bugfixes, introduction of kvmalloc
analogue of kmemdup_user(), extending bitfield.h to deal with
fixed-endians, assorted cleanups all over the place..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
alpha: osf_sys.c: use timespec64 where appropriate
alpha: osf_sys.c: fix put_tv32 regression
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
dcache: delete unused d_hash_mask
dcache: subtract d_hash_shift from 32 in advance
fs/buffer.c: fold init_buffer() into init_page_buffers()
fs: fold __inode_permission() into inode_permission()
fs: add RWF_APPEND
sctp: use vmemdup_user() rather than badly open-coding memdup_user()
snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
replace_user_tlv(): switch to vmemdup_user()
new primitive: vmemdup_user()
memdup_user(): switch to GFP_USER
eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
eventfd: fold eventfd_ctx_read() into eventfd_read()
eventfd: convert to use anon_inode_getfd()
nfs4file: get rid of pointless include of btrfs.h
uvc_v4l2: clean copyin/copyout up
vme_user: don't use __copy_..._user()
usx2y: don't bother with memdup_user() for 16-byte structure
...
This enables the Mesa driver to advertise support for ARB_timer_query,
and thus an OpenGL version higher than 3.2.
Based on the CNL patch by Nanley Chery.
v2: Rebase.
Cc: Anuj Phogat <anuj.phogat@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Requested-by: Anuj Phogat <anuj.phogat@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-10-paulo.r.zanoni@intel.com
This patch clears a single bit. The bit is 0 by default but expected
not to be set. Explicitly clearing the bit in this patch is intended
to indicate some thinking has occurred, and that we want this bit
cleared and we are not just excepting the default value.
We also stop setting GFX_RUN_LIST_ENABLE, which is correct since that
bit is gone.
v2 (from Paulo): fix indentation.
v3: Changed GEN check to >= 11. Corrected author name.
v4 (from Paulo): improve commit message (Daniele).
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Kelvin Gardiner <kelvin.gardiner@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-9-paulo.r.zanoni@intel.com
ICL+ adds changes the PLANE_CTL_FORMAT field from [27:24] to [27:23],
however, all existing PLANE_CTL_FORMAT_* definitions still map to the
correct values. Add an ICL_PLANE_CTL_FORMAT_MASK definition, and use
that for masking for the conversion to fourcc.
v2: No changes
v3: Change new definition name, drop comment (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-8-paulo.r.zanoni@intel.com
This patch introduce MBus control registers and their bit-fields
MBUS_ABOX_CTL
MBUS_BBOX_CTL
MBUS_DBOX_CTL
MBUS_UBOX_CTL
Changes Since V1:
- Use function like macros (Paulo)
- fix copy-paste error (Paulo)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-6-paulo.r.zanoni@intel.com
We don't have planar pixel format support implemented for ICL yet.
ICL require 2 display planes to be allocated for Planar formats unlike
previous GEN. So ICL/GEN11 doesn't require to write Y-plane ddb data in
NV12_BUF_CFG register and PLANE_NV12_BUF_CFG register is removed in ICL.
This patch removes the PLANE_NV12_BUF_CFG write for ICL.
Changes Since V1:
- Improve commit message as per Paulo's comment
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-5-paulo.r.zanoni@intel.com
ICL require DDB allocation of plane to be more than "minimum display
buffer needed" for each level in order to enable WM level.
This patch implements and consider the same while allocating DDB
and enabling WM.
Changes Since V1:
- rebase
Changes Since V2:
- Remove extra parentheses
- Use FP16.16 only when absolutely necessary (Paulo)
Changes Since V3:
- Rebase
Changes since v4 (from Paulo):
- Coding style issue.
Changes since v5 (from Paulo):
- Do the final checks according to BSpec.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-4-paulo.r.zanoni@intel.com
GEN9/10 had fixed DBuf block size of 512. Dbuf block size is not a
fixed number anymore in GEN11, it varies according to bits per pixel
and tiling. If 8bpp & Yf-tile surface, block size = 256 else block
size = 512
This patch addresses the same.
v2 (from Paulo):
- Make it compile.
- Fix a few coding style issues.
v3:
- Rebase on top of upstream patches
v4 (from Paulo):
- Bikeshed if statements (James).
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-3-paulo.r.zanoni@intel.com
GEN9 onwards bypass path allocation of 4 blocks was needed, as per
hardware design. ICL doesn't require bypass path allocation of 4 DDB
blocks, handling the same in this patch.
v2 (from Paulo):
- No need for a comment that says what the code already says.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-2-paulo.r.zanoni@intel.com
This is a precautionary measure as I have no evidence to suggest we've
hit a bug here (I was hoping this might explain gdg's odd behaviour, but
alas), but given that we have a function to flush the ggtt writes it
seems prudent to use it prior to changing the fence register. Due to the
intrinsic nature of the GTT often operating as an independent mmio path,
we should not just rely on the write to the fence acting as a full flush
for GTT writes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130164457.14037-1-chris@chris-wilson.co.uk
guc_log_relay_file_create will return -EEXIST if we invoke
relay_late_setup_files multiple times as part of i915_guc_log_control.
However this is to be not cosidered as fail and need to return 0.
This was mistakenly introduced in the below commit. Fix it.
Fixes: 70deeaddc6 "drm/i915/guc: Fix lockdep due to log relay channel handling under struct_mutex"
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1517379279-12967-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Previously, we relied on only running the hangcheck while somebody was
waiting on the GPU, in order to minimise the amount of time hangcheck
had to run. (If nobody was watching the GPU, nobody would notice if the
GPU wasn't responding -- eventually somebody would care and so kick
hangcheck into action.) However, this falls apart from around commit
4680816be3 ("drm/i915: Wait first for submission, before waiting for
request completion"), as not all waiters declare themselves to hangcheck
and so we could switch off hangcheck and miss GPU hangs even when
waiting under the struct_mutex.
If we enable hangcheck from the first request submission, and let it run
until the GPU is idle again, we forgo all the complexity involved with
only enabling around waiters. We just have to remember to be careful that
we do not declare a GPU hang when idly waiting for the next request to
be come ready, as we will run hangcheck continuously even when the
engines are stalled waiting for external events. This should be true
already as we should only be tracking requests submitted to hardware for
execution as an indicator that the engine is busy.
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129144104.3921-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Don't let a lessee control what the current DRM master is set to;
that's the job of the "real" master. Otherwise, the lessee would
disable all access to master operations for the owner and all lessees
under it.
This matches the same check made in the SET_MASTER ioctl.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: 2ed077e467 ("drm: Add drm_object lease infrastructure [v5]")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119015159.1606-1-keithp@keithp.com
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
On CNL SKUs that uses port F, max DP rate is 8.1G for all
ports when we have the elevated voltage (higher than 0.85V).
v2: Make commit message more generic.
v3: Move conditions to a helper to get easier to read. (Ville).
v4: Add a mention to the numerical voltage on commit
message per Manasi request.
v5: Thanks CI! "error: control reaches end of non-void function"
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-10-rodrigo.vivi@intel.com
Now let's finish the Port-F support by adding the
proper port F detection, irq and power well support.
v2: Rebase
v3: Use BIT_ULL
v4: Cover missed case on ddi init.
v5: Update commit message.
v6: Rebase on top of display headers rework.
v7: Squash power-well handling related to DDI F to this
patch to avoid warns as pointed out by DK.
v8: Introduce DDI_F_LANES to PG2. (DK)
v9: Squash in the PORT_F case for enabling DP MST encoder. (DK)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-9-rodrigo.vivi@intel.com
On CNP boards that are using DDI F,
bit 25 (SDE_PORTE_HOTPLUG_SPT) is representing
the Digital Port F hotplug line when the Digital
Port F hotplug detect input is enabled.
v2: Reuse all existent structure instead of adding a
new HPD_PORT_F pointing to pin of port E.
v3: Use IS_CNL_WITH_PORT_F so we can start upstreaming
this right now. If that SKU ever get a proper name
we come back and update it.
v4: Rebase on top of digital connected port using encoder
instead of port.
v5: Moved IS_CNL_WITH_PORT_F definition to the PCI IDs patch.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-8-rodrigo.vivi@intel.com
Let's try to simplify this mapping to hpd_pin -> bit
instead using port.
So for CNL with port F where we have this port using
hdp_pin and bits of other ports we don't need to duplicated
the mapping.
But for now this is only a re-org with no functional change
expected.
v2: Add missing lines and nuke @port reference from code
documentation. (Ville)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-7-rodrigo.vivi@intel.com
On CNP Pin 3 is for misc of Port F usage depending on the
configuration. For CNL that uses Port F, pin 3 is the one.
v2: Make it more generic and update commit message.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-6-rodrigo.vivi@intel.com
Since when it got introduced with commit '555e38d27317
("drm/i915/cnl: DDI - PLL mapping")' the support for Port F
was wrong, because Port F bits are far from bits used
for A to E.
Since Port F is not used so far we don't need to propagate
Fixes back there.
v2: Reuse _SHIFT definition to avoid complicated duplication (DK).
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-5-rodrigo.vivi@intel.com
This was wrong since its introduction on commit '04416108ccea
("drm/i915/cnl: Add registers related to voltage swing sequences.")'
But since no Port F was needed so far we don't need to
propagate fixes back there.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-4-rodrigo.vivi@intel.com
On some Cannonlake SKUs we have a dedicated Aux for port F,
that is only the full split between port A and port E.
There is still no Aux E for Port E, as in previous platforms,
because port_E still means shared lanes with port A.
v2: Rebase.
v3: Add couple missed PORT_F cases on intel_dp.
v4: Rebase and fix commit message.
v5: Squash Imre's "drm/i915: Add missing AUX_F power well string"
v6: Rebase on top of display headers rework.
v7: s/IS_CANNONLAKE/IS_CNL_WITH_PORT_F (DK)
v8: Fix Aux bits for Port F (DK)
v9: Fix VBT definition of Port F (DK).
v10: Squash power well addition to this patch to avoid
warns as pointed by DK.
v11: Clean up squashed commit message. (David)
v12: Remove unnecessary handling for older platforms (DK)
Adding AUX_F to PG2 following other existent ones. (DK)
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-2-rodrigo.vivi@intel.com
The only difference is that this SKUs has the full
Port A/E split named as Port F.
But since SKUs differences don't matter on the platform
definition group and ids, let's merge all off them together.
v2: Really include the PCI IDs to the picidlist[];
v3: Add the PCI Id for another SKU (Anusha).
v4: Update IDs, really include to pciidlists again.
v5: Unify all GT2 IDs.
v6: Unify in a way that we don't break early-quirks.c
v7: Remove GT reference since it doesn't matter here (Paulo)
Also move IS_CNL_WITH_PORT_F macro to this patch to
make it easier for review this part and also to get
used sooner.
v8: Rebased on top of commit 5db47e37b3 ("Revert "drm/i915:
mark all device info struct with __initconst"")
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-1-rodrigo.vivi@intel.com
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130100528.GA7154@training
The parentheses are in the wrong place here so we pass the bits per
pixel as zero.
Fixes: abbee62387 ("drm/mgag200: Added resolution and bandwidth limits for various G200e products.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125142655.GA23885@mwanda
drm_encoder_slave is the old way to write bridge drivers, for i2c
bridges only. It's deprecated, and definitely should not be used in
new drivers. This has absolutely nothing to do with the new bridge
driver infrastructure implemented by drm_bridge.
What's even strange is that arcpgu doesn't even use any of this, it
really only wants a plain normal drm_encoder. Nuke all the surplus
real estate.
v2: Actually git add after compile testing ...
v3: Clarify commit message and stop including drm_encoder_slave.h.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117141755.16933-1-daniel.vetter@ffwll.ch
Userspace can set a FB_ID on a plane without setting CRTC_ID, which
will fail with -EINVAL, but the kernel shouldn't warn about that.
Same for !FB_ID and CRTC_ID being set.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130102704.28016-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
While running the kms_plane clipping test I noticed a similar problem to
the one described in Display WA #1175. In this case, similarly for
planes other than the cursor, with 1 or 3 pixels visible from the left
edge of the screen to the end of the plane and an odd plane X offset
used for clipping causes the same kind of underflow and display
corruption as described for WA #1175. Fix this in a similar way as that
WA rejecting planes ending <4 pixels from the left screen edge.
v2:
- Rebase on v2 of patch 1/1.
Testcase: igt/kms_plane/plane-clipping-pipe-*-planes
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116112415.22060-2-imre.deak@intel.com
As described in the WA on GLK and CNL planes on the right edge of the
screen that have less than 4 pixels visible from the beginning of the
plane to the edge of the screen can cause FIFO underflow and display
corruption.
On GLK/CNL I could trigger the problem only if the plane was at the same
time also aligned to the top edge of the screen (after clipping) and
there were exactly 2 pixels visible from the start of the plane to the
right edge of the screen (so couldn't trigger it with 1 or 3 pixels
visible). Nevertheless, to be sure, I also applied the WA for these cases.
I also couldn't see any problem with the cursor plane and later Art
confirmed that it's not affected, so the WA is applied only for the
other plane types.
v2:
- Use -ERANGE instead of -EINVAL. (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116112415.22060-1-imre.deak@intel.com
The dw_mipi_dsi_host_transfer() must return the number of
bytes transmitted/received on success instead of 0.
Note: As the read feature is not implemented, only the
transmitted number of bytes is returned for the moment.
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-3-philippe.cornu@st.com
The dcs/generic dsi read feature is not yet implemented so it
is important to warn the host_transfer() caller in case of
read operation requests.
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-2-philippe.cornu@st.com
Rex Zhu