Commit Graph

9695 Commits

Author SHA1 Message Date
Jason Gunthorpe ca22354b14 RDMA/rxe: Close a race after ib_register_device
Since rxe allows unregistration from other threads the rxe pointer can
become invalid any moment after ib_register_driver returns. This could
cause a user triggered use after free.

Add another driver callback to be called right after the device becomes
registered to complete any device setup required post-registration.  This
callback has enough core locking to prevent the device from becoming
unregistered.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:18 -07:00
Jason Gunthorpe 6cc2c8e535 RDMA/rxe: Add ib_device_get_by_name() and use it in rxe
rxe has an open coded version of this that is not as safe as the core
version. This lets us eliminate the internal device list entirely from
rxe.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:18 -07:00
Jason Gunthorpe c367074b6c RDMA/rxe: Use driver_unregister and new unregistration API
rxe does not have correct locking for its registration/unregistration
paths, use the core code to handle it instead. In this mode
ib_unregister_device will also do the dealloc, so rxe is required to do
clean up from a callback.

The core code ensures that unregistration is done only once, and generally
takes care of locking and concurrency problems for rxe.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:18 -07:00
Jason Gunthorpe d0899892ed RDMA/device: Provide APIs from the core code to help unregistration
These APIs are intended to support drivers that exist outside the usual
driver core probe()/remove() callbacks. Normally the driver core will
prevent remove() from running concurrently with probe(), once this safety
is lost drivers need more support to get the locking and lifetimes right.

ib_unregister_driver() is intended to be used during module_exit of a
driver using these APIs. It unregisters all the associated ib_devices.

ib_unregister_device_and_put() is to be used by a driver-specific removal
function (ie removal by name, removal from a netdev notifier, removal from
netlink)

ib_unregister_queued() is to be used from netdev notifier chains where
RTNL is held.

The locking is tricky here since once things become async it is possible
to race unregister with registration. This is largely solved by relying on
the registration refcount, unregistration will only ever work on something
that has a positive registration refcount - and then an unregistration
mutex serializes all competing unregistrations of the same device.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:18 -07:00
Jason Gunthorpe 4c173f596b RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding
The core API handles the locking correctly and is faster if there are
multiple devices.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:18 -07:00
Jason Gunthorpe 324e227ea7 RDMA/device: Add ib_device_get_by_netdev()
Several drivers need to find the ib_device from a given netdev. rxe needs
this at speed in an unsleepable context, so choose to implement the
translation using a RCU safe hash table.

The hash table can have a many to one mapping. This is intended to support
some future case where multiple IB drivers (ie iWarp and RoCE) connect to
the same netdevs. driver_ids will need to be different to support this.

In the process this makes the struct ib_device and ib_port_data RCU safe
by deferring their kfrees.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:18 -07:00
Jason Gunthorpe c2261dd76b RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdev
The associated netdev should not actually be very dynamic, so for most
drivers there is no reason for a callback like this. Provide an API to
inform the core code about the net dev affiliation and use a core
maintained data structure instead.

This allows the core code to be more aware of the ndev relationship which
will allow some new APIs based around this.

This also uses locking that makes some kind of sense, many drivers had a
confusing RCU lock, or missing locking which isn't right.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 20:52:18 -07:00
Jason Gunthorpe 8faea9fd4a RDMA/cache: Move the cache per-port data into the main ib_port_data
Like the other cases there no real reason to have another array just for
the cache. This larger conversion gets its own patch.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:39 -07:00
Jason Gunthorpe 8ceb1357b3 RDMA/device: Consolidate ib_device per_port data into one place
There is no reason to have three allocations of per-port data. Combine
them together and make the lifetime for all the per-port data match the
struct ib_device.

Following patches will require more port-specific data, now there is a
good place to put it.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:39 -07:00
Jason Gunthorpe ea1075edcb RDMA: Add and use rdma_for_each_port
We have many loops iterating over all of the end port numbers on a struct
ib_device, simplify them with a for_each helper.

Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:39 -07:00
Leon Romanovsky f2a0e45f36 RDMA/nldev: Don't expose number of not-visible entries
Netlink dumpit handshake exchanges the index from which kernel should
start to return its value, in current code, this index included
not-visible in this PID items too and indirectly revealed the number of
entries.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:39 -07:00
Leon Romanovsky 1b8b778864 RDMA/nldev: Connect QP number to .doit callback
This patch adds ability to query specific QP based on its LQPN (local
QPN), which is assigned by HW and needs special treatment while inserting
into restrack DB.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:39 -07:00
Leon Romanovsky c3d02788b4 RDMA/nldev: Provide parent IDs for PD, MR and QP objects
PD, MR and QP objects have parents objects: contexts and PDs.  The exposed
parent IDs allow to correlate various objects and simplify debug
investigation.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:39 -07:00
Leon Romanovsky 517b773e0f RDMA/nldev: Share with user-space object IDs
Give to the user space tools unique identifier for PD, MR, CQ and CM_ID
objects, so they can be able to query on them with .doit callbacks.

QP .doit is not supported yet, till all drivers will be updated to provide
their LQPN to be equal to their restrack ID.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:39 -07:00
Leon Romanovsky 7c77c6a9bf RDMA/restrack: Prepare restrack_root to addition of extra fields per-type
As a preparation to extension of rdma_restrack_root to provide software
IDs, which will be per-type too. We convert the rdma_restrack_root from
struct with arrays to array of structs.

Such conversion allows us to drop rwsem lock in favour of internal XArray
lock.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19 10:13:38 -07:00
Leon Romanovsky 41eda65c61 RDMA/restrack: Hide restrack DB from IB/core
There is no need to expose internals of restrack DB to IB/core.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-18 21:04:36 -07:00
Leon Romanovsky 4811852718 RDMA/restrack: Reduce scope of synchronization lock while updating DB
XArray uses internal lock for updates to XArray. This means that our
external RW lock is needed to ensure that entry is not deleted while we
are performing iteration over list.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-18 21:04:36 -07:00
Leon Romanovsky c5dfe0ea6f RDMA/nldev: Add resource tracker doit callback
Implement doit callbacks and ensure that users won't provide port values
on resource entry allocated in per-device mode needed for .doit callback.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-18 21:04:36 -07:00
Leon Romanovsky 18c4c66f76 RDMA/restrack: Translate from ID to restrack object
Add new general helper to get restrack entry given by ID and their
respective type.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-18 21:04:36 -07:00
Leon Romanovsky fd47c2f99f RDMA/restrack: Convert internal DB from hash to XArray
The additions of .doit callbacks posses new access pattern to the resource
entries by some user visible index. Back then, the legacy DB was
implemented as hash because per-index access wasn't needed and XArray
wasn't accepted yet.

Acceptance of XArray together with per-index access requires the refresh
of DB implementation.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-18 21:04:36 -07:00
Parav Pandit 5f8f549900 RDMA/core: Move device addition deletion to device.c
Move core device addition and removal from sysfs.c to device.c as device.c
is more appropriate place for device management.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 21:57:14 -07:00
Parav Pandit 5767198a14 RDMA/core: Introduce and use ib_setup_port_attrs()
Refactor code for device and port sysfs attributes for reuse.

While at it, rename counter part free function to ib_free_port_attrs.

Also attribute setup sequence is:
(a) port specific init.
(b) device stats alloc/init.

So for cleanup, follow reverse sequence:
(a) device stats dealloc
(b) port specific cleanup

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 21:52:17 -07:00
Parav Pandit e155755e53 RDMA/core: Use simpler device_del() instead of device_unregister()
Instead of holding extra reference using get_device() that
device_unregister() releases, simplify it as below.

device_add() balances with device_del().  device_initialize() balances
with put_device(), always via ib_dealloc_device().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 21:42:02 -07:00
Leon Romanovsky cfe876d8e6 RDMA/cxgb4: Remove kref accounting for sync operation
Ucontext allocation and release aren't async events and don't need kref
accounting. The common layer of RDMA subsystem ensures that dealloc
ucontext will be called after all other objects are released.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 21:39:15 -07:00
Leon Romanovsky be56b07b4f RDMA/nes: Remove useless usecnt variable and redundant memset
The internal design of RDMA/core ensures that there dealloc ucontext will
be called only if alloc_ucontext succeeded, hence there is no need to
manage internal variable to mark validity of ucontext.

As part of this change, remove redundant memeset too.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 21:39:15 -07:00
Bodong Wang f8e8fa0262 net/mlx5: E-Switch, Centralize repersentor reg/unreg to eswitch driver
Eswitch has two users: IB and ETH. They both register repersentors
when mlx5 interface is added, and unregister the repersentors when
mlx5 interface is removed. Ideally, each driver should only deal with
the entities which are unique to itself. However, current IB and ETH
drivers have to perform the following eswitch operations:

1. When registering, specify how many vports to register. This number
   is the same for both drivers which is the total available vport
   numbers.
2. When unregistering, specify the number of registered vports to do
   unregister. Also, unload the repersentors which are already loaded.

It's unnecessary for eswitch driver to hands out the control of above
operations to individual driver users, as they're not unique to each
driver. Instead, such operations should be centralized to eswitch
driver. This consolidates eswitch control flow, and simplified IB and
ETH driver.

This patch doesn't change any functionality.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15 17:25:58 -08:00
Saeed Mahameed 259fae5a2c Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Merge mlx5-next shared branched into net-next,

From Bodong Wang:
1) Introduction of ECPF (Embedded CPU Physical Function), and low level
bits for mlx5 SmartNic capabilities support.
2) Vport enumeration refactoring that affect mlx5_ib and mlx5_core

From Aya Levin,
3) Add support for 50Gbps per lane link modes in the Port Type and Speed
register (PTYS)
4) Refactor low level query functions for PTYS register
5) Add support for 50Gbps per lane link modes to mlx5_ib

Note: due to a change in API in mlx5/core and a later patch from net-next,
a fixup was squashed with this merge commit that replaces FDB_UPLINK_VPORT
with MLX5_VPORT_UPLINK which exists only in upstream net-next.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-15 16:45:31 -08:00
Kaike Wan e50838c27f IB/hfi1: Fix a build warning for TID RDMA READ
The following build warning was produced for the TID RDMA READ
patch ("IB/hfi1: Enable TID RDMA READ protocol"):

drivers/infiniband/hw/hfi1/qp.c: In function 'hfi1_setup_wqe':
drivers/infiniband/hw/hfi1/qp.c:328:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   hfi1_setup_tid_rdma_wqe(qp, wqe);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/qp.c:329:2: note: here
  case IB_QPT_UC:
  ^~~~

This patch will fix the issue by adding the "fall through" comment.

Fixes: f1ab4efa6d ("IB/hfi1: Enable TID RDMA READ protocol")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 15:55:50 -07:00
Jason Gunthorpe 9a7786784d RDMA/uverbs: Fix an error flow in ib_uverbs_poll_cq
The new output_written block was wrongly placed before the ret=0, causing
the error code to be lost. uverbs_output_written is not expected to fail,
and even if it does fail it has no significant impact on the userspace
flow.

Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: d6f4a21f30 ("RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUT")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2019-02-15 15:54:46 -07:00
Shamir Rabinovitch 8994445054 IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIs
Now when we have the udata passed to all the ib_xxx object creation APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 15:38:38 -07:00
Shamir Rabinovitch 3d9dfd0603 IB/uverbs: Add ib_ucontext to uverbs_attr_bundle sent from ioctl and cmd flows
Add ib_ucontext to the uverbs_attr_bundle sent down the iocl and cmd flows
as soon as the flow has ib_uobject.

In addition, remove rdma_get_ucontext helper function that is only used by
ib_umem_get.

Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 11:16:21 -07:00
Raju Rangoju f09ef134a7 iw_cxgb4: cq/qp mask depends on bar2 pages in a host page
Adjust the cq/qp mask based on the number of bar2 pages in a host page.

For user-mode rdma, the granularity of the BAR2 memory mapped to a user
rdma process during queue allocation must be based on the host page
size. The lld attributes udb_density and ucq_density are used to figure
out how many sge contexts are in a bar2 page. So the rdev->qpmask and
rdev->cqmask in iw_cxgb4 need to now be adjusted based on how many sge
bar2 pages are in a host page.

Otherwise the device fails to work on non 4k page size systems.

Fixes: 2391b0030e ("cxgb4: Remove SGE_HOST_PAGE_SIZE dependency on page size")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15 09:39:39 -07:00
Erez Alfasi 0dd9ce18b9 IB/ipoib: Use __func__ instead of function's name
Changed debug statements to use %s and __func__ instead
of hard-coded function's name.

Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14 14:48:58 -07:00
YueHaibing 36f0a1ccb3 RDMA/iwpm: Remove set but not used variable 'msg_seq'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/core/iwpm_util.c: In function 'iwpm_send_hello':
drivers/infiniband/core/iwpm_util.c:811:6: warning:
 variable 'msg_seq' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit b0bad9ad51 ("RDMA/IWPM:
Support no port mapping requirements")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14 14:47:39 -07:00
Lijun Ou dad1f9802e RDMA/hns: Configure capacity of hns device
This patch adds new device capability for IB_DEVICE_MEM_MGT_EXTENSIONS to
indicate device support for the following features:

1. Fast register memory region.
2. send with remote invalidate by frmr
3. local invalidate memory regsion

As well as adds the max depth of frmr page list len.

Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14 13:20:19 -07:00
Yixian Liu e95c716c7f RDMA/hns: Delete useful prints for aeq subtype event
Current all messages printed for aeq subtype event are wrong.  Thus,
delete them and only the value of subtype event is printed.

Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14 13:20:19 -07:00
Yixian Liu f7f27a5f03 RDMA/hns: Set allocated memory to zero for wrid
The memory allocated for wrid should be initialized to zero.

Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14 13:20:19 -07:00
Yixian Liu ab22bf0521 RDMA/hns: Fix the state of rereg mr
The state of mr after reregister operation should be set to valid
state. Otherwise, it will keep the same as the state before reregistered.

Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14 13:20:18 -07:00
chenglang 704e0e613a RDMA/hns: Limit minimum ROCE CQ depth to 64
This patch modifies the minimum CQ depth specification of hip08 and is
consistent with the processing of hip06.

Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-14 13:20:18 -07:00
Aya Levin 08e8676f16 IB/mlx5: Add support for 50Gbps per lane link modes
Driver now supports new link modes: 50Gbps per lane support for
50G/100G/200G. This patch reads the correct field (legacy vs. extended)
based on a FW indication bit, and adds a translation function (link
modes to IB width and speed) to the new link modes.

Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-14 12:14:42 -08:00
Aya Levin a08b4ed137 net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register
This patch exposes new link modes (including 50Gbps per lane), and ext_*
fields which describes the new link modes in Port Type and Speed
register (PTYS).
Access functions, translation functions (speed <-> HW bits) and
link max speed function were modified.

Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-14 12:14:42 -08:00
Aya Levin bc4e12ffef net/mlx5: Refactor queries to speed fields in Port Type and Speed register
This patch fascicles queries to speed related fields in Port Type and
Speed register (PTYS) into a single API. I addition, this patch
refactors functions which serves only Ethernet driver: remove the
protocol type as an input parameter, move code from 'core' directory
into 'en' directory and add 'eth' prefix to the function's name. The
patch also encapsulates functions that are not used outside the Ethernet
driver removes redundant include files.

Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-14 12:14:42 -08:00
Bodong Wang b05af6aacd net/mlx5: E-Switch, Normalize the name of uplink vport number
Driver used to name uplink vport as FDB_UPLINK_VPORT, it's hard to
comply with the same naming convention along with the introduction of
other vports. Use MLX5_VPORT as the prefix for such vports and
relocate the uplink vport definition to public header file for the
benefits of both net and IB drivers.

This patch doesn't change any functionality.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-14 12:14:42 -08:00
Bodong Wang f0666f1f22 IB/mlx5: Use unified register/load function for uplink and VF vports
IB driver maintains different registration and load function calls
for uplink and VF vports. This is not necessary as they only differ
with each other on their profiles.

This patch doesn't change any functionality.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-14 12:14:41 -08:00
Shiraz, Saleem 52a572e9f7 RDMA/nes: Use for_each_sg_dma_page iterator for umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-13 09:00:43 -07:00
Shiraz, Saleem 36d577089d RDMA/rdmavt: Adapt to handle non-uniform sizes on umem SGEs
rdmavt expects a uniform size on all umem SGEs which is currently at
PAGE_SIZE.

Adapt to a umem API change which could return non-uniform sized SGEs due
to combining contiguous PAGE_SIZE regions into an SGE. Use
for_each_sg_page variant to unfold the larger SGEs into a list of
PAGE_SIZE elements.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-13 09:00:43 -07:00
Colin Ian King e8ac9389f0 RDMA: Fix allocation failure on pointer pd
The null check on an allocation failure on pd is currently checking
if pd is non-null rather than null. Fix this by adding the missing !
operator.

Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-13 09:00:43 -07:00
Doug Ledford d892273bb5 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma into for-next
I had merged the hfi1-tid code into my local copy of for-next, but was
waiting on 0day testing before pushing it (I pushed it to my wip
branch).  Having waited several days for 0day testing to show up, I'm
finally just going to push it out.  In the meantime, though, Jason
pushed other stuff to for-next, so I needed to merge up the branches
before pushing.

Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-13 09:35:39 -05:00
Colin Ian King a87145957e RDMA/bnxt_re: fix or'ing of data into an uninitialized struct member
The struct member comp_mask has not been initialized however a bit
pattern is being bitwise or'd into the member and hence other bit
fields in comp_mask may contain any garbage from the stack. Fix this
by making the bitwise or into an assignment.

Fixes: 95b86d1c91 ("RDMA/bnxt_re: Update kernel user abi to pass chip context")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:34:54 -07:00
Mark Bloch fc9e4477f9 RDMA/mlx5: Fix memory leak in case we fail to add an IB device
Make sure the IB device is freed on failure.

Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:32:29 -07:00
Yishai Hadas 0da4d48d99 IB/mlx5: Fix bad flow upon DEVX mkey creation
Fix bad flow upon DEVX mkey creation to prevent deleting the indirect mkey
from the radix tree in case there was a previous failure to insert it.

Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:30:40 -07:00
Shiraz, Saleem 8317d6cdc1 RDMA/rxe: Use for_each_sg_page iterator on umem SGL
The driver walks the umem SGL assuming a 1:1 mapping between SGE and
system page. Update to use the for_each_sg_page iterator to get individual
pages contained in the SGEs.  This is a pre-requisite before adding page
combining into SGEs while building the scatter table in IB core.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:24:55 -07:00
Shiraz, Saleem be8c456abf RDMA/ocrdma: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:24:55 -07:00
Shiraz, Saleem 95ad233ffb RDMA/qedr: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:24:55 -07:00
Shiraz, Saleem f3e6d31179 RDMA/vmw_pvrdma: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:24:55 -07:00
Shiraz, Saleem b44e47eb06 RDMA/cxgb3: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:24:55 -07:00
Shiraz, Saleem 48b586ac36 RDMA/cxgb4: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:24:55 -07:00
Shiraz, Saleem 3856ec5527 RDMA/hns: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:02:33 -07:00
Shiraz, Saleem 43fae91276 RDMA/i40iw: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:02:33 -07:00
Shiraz, Saleem 8d249af3e6 RDMA/mthca: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:02:33 -07:00
Shiraz, Saleem 161ebe2498 RDMA/bnxt_re: Use for_each_sg_dma_page iterator on umem SGL
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.

Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-11 15:02:33 -07:00
Doug Ledford 82771f2033 Merge branch 'wip/dl-for-next' into for-next
Due to concurrent work by myself and Jason, a normal fast forward merge
was not possible.  This brings in a number of hfi1 changes, mainly the
hfi1 TID RDMA support (roughly 10,000 LOC change), which was reviewed
and integrated over a period of days.

Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-09 12:54:04 -05:00
Raju Rangoju f368ff188a iw_cxgb4: fix srqidx leak during connection abort
When an application aborts the connection by moving QP from RTS to ERROR,
then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the
*srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the
connection by calling c4iw_ep_disconnect().

c4iw_ep_disconnect() does the following:
 1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4.
 2. sends abort request CPL to hw.

But, since the close_complete_upcall() is sent before sending the
ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the
connection holds one. Because, the srqidx is passed up to libcxgb4 only
after corresponding ABORT_RPL is processed by kernel in abort_rpl().

This patch handle the corner-case by moving the call to
close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl().  So that
libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and
libcxgb4 can relinquish the srqidx properly.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 17:02:05 -07:00
Raju Rangoju 11a27e2121 iw_cxgb4: complete the cached SRQ buffers
If TP fetches an SRQ buffer but ends up not using it before the connection
is aborted, then it passes the index of that SRQ buffer to the host in
ABORT_REQ_RSS or ABORT_RPL CPL message.

But, if the srqidx field is zero in the received ABORT_RPL or
ABORT_REQ_RSS CPL, then we need to read the tcb.rq_start field to see if
it really did have an RQE cached. This works around a case where HW does
not include the srqidx in the ABORT_RPL/ABORT_REQ_RSS CPL.

The final value of rq_start is the one present in TCB with the
TF_RX_PDU_OUT bit cleared. So, we need to read the TCB, examine the
TF_RX_PDU_OUT (bit 49 of t_flags) in order to determine if there's a rx
PDU feedback event pending.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 17:02:05 -07:00
Jason Gunthorpe 921eab1143 RDMA/devices: Re-organize device.c locking
The locking here started out with a single lock that covered everything
and then has lately veered into crazy town.

The fundamental problem is that several places need to iterate over a
linked list, but also need to drop their locks to avoid deadlock during
client callbacks.

xarray's restartable iteration offers a simple solution to the
problem. Once all the lists are xarrays we can drop locks in the places
that need that and rely on xarray to provide consistency and locking for
the data structure.

The resulting simplification is that each of the three lists has a
dedicated rwsem that must be held when working with the list it
covers. One data structure is no longer covered by multiple locks.

The sleeping semaphore is selected because the read side generally needs
to be held over something sleeping, and using RCU reader locking in those
cases is overkill.

In the process this simplifies the entire registration/unregistration flow
to be the expected list of setups and the reversed list of matching
teardowns, and the registration lock 'refcount' can now be revised to be
released after the ULPs are removed, providing a very sane semantic for
this feature.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:56:45 -07:00
Jason Gunthorpe 0df91bb673 RDMA/devices: Use xarray to store the client_data
Now that we have a small ID for each client we can use xarray instead of
linearly searching linked lists for client data. This will give much
faster and scalable client data lookup, and will lets us revise the
locking scheme.

Since xarray can store 'going_down' using a mark just entirely eliminate
the struct ib_client_data and directly store the client_data value in the
xarray. However this does require a special iterator as we must still
iterate over any NULL client_data values.

Also eliminate the client_data_lock in favour of internal xarray locking.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:56:45 -07:00
Jason Gunthorpe e59178d895 RDMA/devices: Use xarray to store the clients
This gives each client a unique ID and will let us move client_data to use
xarray, and revise the locking scheme.

clients have to be add/removed in strict FIFO/LIFO order as they
interdepend. To support this the client_ids are assigned to increase in
FIFO order. The existing linked list is kept to support reverse iteration
until xarray can get a reverse iteration API.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
2019-02-08 16:56:45 -07:00
Jason Gunthorpe 3b88afd38e RDMA/device: Use an ida instead of a free page in alloc_name
ida is the proper data structure to hold list of clustered small integers
and then allocate an unused integer. Get rid of the convoluted and limited
open-coded bitmap.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:56:45 -07:00
Jason Gunthorpe 652432f33c RDMA/device: Get rid of reg_state
This really has no purpose anymore, refcount can be used to tell if the
device is still registered. Keeping it around just invites mis-use.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
2019-02-08 16:56:45 -07:00
Jason Gunthorpe d45f89d59b RDMA/device: Call ib_cache_release_one() only from ib_device_release()
Instead of complicated logic about when this memory is freed, always free
it during device release(). All the cache pointers start out as NULL, so
it is safe to call this before the cache is initialized.

This makes for a simpler error unwind flow, and a simpler understanding of
the lifetime of the memory allocations inside the struct ib_device.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:56:45 -07:00
Jason Gunthorpe b34b269ad8 RDMA/device: Ensure that security memory is always freed
Since this only frees memory it should be done during the release
callback. Otherwise there are possible error flows where it might not get
called if registration aborts.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:56:45 -07:00
Jason Gunthorpe e3593b568a RDMA/device: Check that the rename is nop under the lock
Since another rename could be running in parallel it is safer to check
that the name is not changing inside the lock, where we already know the
device name will not change.

Fixes: d21943dd19 ("RDMA/core: Implement IB device rename function")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
2019-02-08 16:56:45 -07:00
Leon Romanovsky 21a428a019 RDMA: Handle PD allocations by IB/core
The PD allocations in IB/core allows us to simplify drivers and their
error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand
in had with relevant update in .dealloc_pd().

We will use this opportunity and convert .dealloc_pd() to don't fail, as
it was suggested a long time ago, failures are not happening as we have
never seen a WARN_ON print.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:51:04 -07:00
Leon Romanovsky 30471d4b20 RDMA/core: Share driver structure size with core
Add new macros to be used in drivers while registering ops structure and
IB/core while calling allocation routines, so drivers won't need to
perform kzalloc/kfree in their paths.

The change in allocation stage allows us to initialize common fields prior
to calling to drivers (e.g. restrack).

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:50:58 -07:00
Daniel Jurgens c66f67414c IB/core: Don't register each MAD agent for LSM notifier
When creating many MAD agents in a short period of time, receive packet
processing can be delayed long enough to cause timeouts while new agents
are being added to the atomic notifier chain with IRQs disabled.  Notifier
chain registration and unregstration is an O(n) operation. With large
numbers of MAD agents being created and destroyed simultaneously the CPUs
spend too much time with interrupts disabled.

Instead of each MAD agent registering for it's own LSM notification,
maintain a list of agents internally and register once, this registration
already existed for handling the PKeys. This list is write mostly, so a
normal spin lock is used vs a read/write lock. All MAD agents must be
checked, so a single list is used instead of breaking them down per
device.

Notifier calls are done under rcu_read_lock, so there isn't a risk of
similar packet timeouts while checking the MAD agents security settings
when notified.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:24:44 -07:00
Daniel Jurgens 6e88e672b6 IB/core: Fix potential memory leak while creating MAD agents
If the MAD agents isn't allowed to manage the subnet, or fails to register
for the LSM notifier, the security context is leaked. Free the context in
these cases.

Fixes: 47a2b338fe ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:24:44 -07:00
Daniel Jurgens d60667fc39 IB/core: Unregister notifier before freeing MAD security
If the notifier runs after the security context is freed an access of
freed memory can occur.

Fixes: 47a2b338fe ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:24:44 -07:00
Parvi Kaustubhi 0c23660649 IB/usnic: Fix locking when unregistering
Move the call to usnic_ib_device_remove after usnic_ib_ibdev_list_lock has
been released.

Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:21:59 -07:00
Steve Wise c8a7eb554a iw_cxgb4: use tos when finding ipv6 routes
When IPv6 support was added, the correct tos was not passed to
cxgb_find_route6(). This potentially results in the wrong route entry.

Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:18:06 -07:00
Steve Wise cb3ba0bde8 iw_cxgb4: use tos when importing the endpoint
import_ep() is passed the correct tos, but doesn't use it correctly.

Fixes: ac8e4c69a0 ("cxgb4/iw_cxgb4: TOS support")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:18:06 -07:00
Steve Wise 7235ea227e iw_cxgb4: use listening ep tos when accepting new connections
If the parent listening endpoint has a service type set, then use that
when setting up the connection.  This allows server-side applications to
mandate the tos for passive side connections via rdma_set_service_type()
on the listening endpoints.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:18:06 -07:00
Steve Wise 926ba19b35 RDMA/iwcm: add tos_set bool to iw_cm struct
This allows drivers to know the tos was actively set by the application.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:18:06 -07:00
Steve Wise 9491128f78 RDMA/cma: listening device cm_ids should inherit tos
If a user binds to INADDR_ANY and sets the service id, then the
device-specific cm_ids should also use this tos.  This allows an app to
do:

rdma_bind_addr(INADDR_ANY)
set_service_type()
rdma_listen()

And connections setup via this listening endpoint will use the correct
tos.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:15:40 -07:00
Danit Goldberg 2c1619edef IB/cma: Define option to set ack timeout and pack tos_set
Define new option in 'rdma_set_option' to override calculated QP timeout
when requested to provide QP attributes to modify a QP.

At the same time, pack tos_set to be bitfield.

Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08 16:14:21 -07:00
Devesh Sharma 95b86d1c91 RDMA/bnxt_re: Update kernel user abi to pass chip context
User space verbs provider library would need chip context.  Changing the
ABI to add chip version details in structure.  Furthermore, changing the
kernel driver ucontext allocation code to initialize the abi structure
with appropriate values.

As suggested by community, appended the new fields at the bottom of the
ABI structure and retaining to older fields as those were in the older
versions.

Keeping the ABI version at 1 and adding a new field in the ucontext
response structure to hold the component mask.  The user space library
should check pre-defined flags to figure out if a certain feature is
supported on not.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 13:24:49 -07:00
Devesh Sharma 37f91cff2d RDMA/bnxt_re: Add extended psn structure for 57500 adapters
The new 57500 series of adapter has bigger psn search structure.  The size
of new structure is 16B. Changing the control path memory allocation and
fast path code to accommodate the new psn structure while maintaining the
backward compatibility.

There are few additional changes listed below:
 - For 57500 chip max-sge are limited to 6 for now.
 - For 57500 chip max-receive-sge should be set to 6 for now.
 - Add driver/hardware interface structure for new chip.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 13:24:48 -07:00
Devesh Sharma 374c5285ab RDMA/bnxt_re: Enable GSI QP support for 57500 series
In the new 57500 series of adapters the GSI qp is a UD type QP unlike the
previous generation where it was a Raw Eth QP. Changing the control and
data path to support the same. Listing all the significant diffs:

 - AH creation resolve network type unconditionally
 - Add check at relevant places to distinguish from Raw Eth
   processing flow.
 - bnxt_re_process_res_ud_wc report completion with GRH flag
   when qp is GSI.
 - Change length, cfa_meta and smac to match new driver/hardware
   interface.
 - Add new driver/hardware interface.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 13:24:48 -07:00
Devesh Sharma e0387e1dd4 RDMA/bnxt_re: Skip backing store allocation for 57500 series
The backing store to keep HW context data structures is allocated and
initialized by L2 driver. For 57500 chip RoCE driver do not require to
allocate and initialize additional memory. Changing to skip duplicate
allocation and initialization for 57500 adapters. Driver continues as
before for older chips.

This patch also takes care of stats context memory alignment to 128
boundary, a requirement for 57500 series of chip. Older chips do not care
of alignment, thus the change is unconditional.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 13:24:48 -07:00
Devesh Sharma b353ce556d RDMA/bnxt_re: Add 64bit doorbells for 57500 series
The new chip series has 64 bit doorbell for notification queues. Thus,
both control and data path event queues need new routines to write 64 bit
doorbell. Adding the same. There is new doorbell interface between the
chip and driver. Changing the chip specific data structure definitions.

Additional significant changes are listed below
- bnxt_re_net_ring_free/alloc takes a new argument
- bnxt_qplib_enable_nq and enable_rcfw uses new doorbell offset
  for new chip.
- DB mapping for NQ and CREQ now maps 8 bytes.
- DBR_DBR_* macros renames to DBC_DBC_*
- store nq_db_offset in a 32bit data type.
- got rid of __iowrite64_copy, used writeq instead.
- changed the DB header initialization to simpler scheme.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 13:24:48 -07:00
Devesh Sharma ae8637e131 RDMA/bnxt_re: Add chip context to identify 57500 series
Adding setup and destroy routines for chip-context. The chip context would
be used frequently in control and data path to take execution flow
depending on the chip type.  chip context structure pointer is added to
the relevant data structures.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 13:24:48 -07:00
Gal Pressman af8b38ed0b IB/mlx5: Simplify WQE count power of two check
Use is_power_of_2() instead of hard coding it in the driver. While at it,
fix the meaningless error print.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 13:14:55 -07:00
Davidlohr Bueso b95df5e3e4 drivers/IB,core: reduce scope of mmap_sem
ib_umem_get() uses gup_longterm() and relies on the lock to stabilze the
vma_list, so we cannot really get rid of mmap_sem altogether, but now that
the counter is atomic, we can get of some complexity that mmap_sem brings
with only pinned_vm.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 12:54:02 -07:00
Davidlohr Bueso 8ea1f989aa drivers/IB,usnic: reduce scope of mmap_sem
usnic_uiom_get_pages() uses gup_longterm() so we cannot really get rid of
mmap_sem altogether in the driver, but we can get rid of some complexity
that mmap_sem brings with only pinned_vm.  We can get rid of the wq
altogether as we no longer need to defer work to unpin pages as the
counter is now atomic. We also share the lock.

Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 12:54:02 -07:00
Davidlohr Bueso 0e15c25336 drivers/IB,hfi1: do not se mmap_sem
This driver already uses gup_fast() and thus we can just drop the mmap_sem
protection around the pinned_vm counter. Note that the window between when
hfi1_can_pin_pages() is called and the actual counter is incremented
remains the same as mmap_sem was _only_ used for when ->pinned_vm was
touched.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.det>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 12:54:02 -07:00
Davidlohr Bueso 3a2a1e9056 drivers/IB,qib: optimize mmap_sem usage
The driver uses mmap_sem for both pinned_vm accounting and
get_user_pages(). Because rdma drivers might want to use gup_longterm() in
the future we still need some sort of mmap_sem serialization (as opposed
to removing it entirely by using gup_fast()). Now that pinned_vm is atomic
the writer lock can therefore be converted to reader.

This also fixes a bug that __qib_get_user_pages was not taking into
account the current value of pinned_vm.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 12:54:02 -07:00
Davidlohr Bueso 70f8a3ca68 mm: make mm->pinned_vm an atomic64 counter
Taking a sleeping lock to _only_ increment a variable is quite the
overkill, and pretty much all users do this. Furthermore, some drivers
(ie: infiniband and scif) that need pinned semantics can go to quite
some trouble to actually delay via workqueue (un)accounting for pinned
pages when not possible to acquire it.

By making the counter atomic we no longer need to hold the mmap_sem and
can simply some code around it for pinned_vm users. The counter is 64-bit
such that we need not worry about overflows such as rdma user input
controlled from userspace.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07 12:54:02 -07:00
Kaike Wan 34025fb0c4 IB/hfi1: Prioritize the sending of ACK packets
ACK packets are generally associated with request completion and resource
release and therefore should be sent first. This patch optimizes the
send engine by using the following policies:
(1) QPs with RVT_S_ACK_PENDING bit set in qp->s_flags or qpriv->s_flags
should have their priority incremented;
(2) QPs with ACK or TID-ACK packet queued should have their priority
incremented;
(3) When a QP is queued to the wait list due to resource constraints, it
will be queued to the head if it has ACK packet to send;
(4) When selecting qps to run from the wait list, the one with the highest
priority and starve_cnt will be selected; each priority will be equivalent
to a fixed number of starve_cnt (16).

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05 18:07:44 -05:00
Kaike Wan a05c9bdcfd IB/hfi1: Add static trace for TID RDMA WRITE protocol
This patch makes the following changes to the static trace:
1. Adds the decoding of TID RDMA WRITE packets in IB header trace;
2. Adds trace events for various stages of the TID RDMA WRITE
protocol. These events provide a fine-grained control for monitoring
and debugging the hfi1 driver in the filed.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05 18:07:44 -05:00
Kaike Wan ad00889e7c IB/hfi1: Enable TID RDMA WRITE protocol
This patch enables TID RDMA WRITE protocol by converting a qualified
RDMA WRITE request into a TID RDMA WRITE request internally:
(1) The TID RDMA cability must be enabled;
(2) The request must start on a 4K page boundary;
(3) The request length must be a multiple of 4K and must be larger or
equal to 256K.

Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05 18:07:44 -05:00
Kaike Wan c6c231175c IB/hfi1: Add interlock between TID RDMA WRITE and other requests
This locking mechanism is designed to provent vavious memory corruption
scenarios from occurring when requests are pipelined, especially when
RDMA WRITE requests are interleaved with TID RDMA READ requests:
1. READ-AFTER-READ;
2. READ-AFTER-WRITE;
3. WRITE-AFTER-READ;
4. WRITE-AFTER-WRITE.
When memory corruption is likely, a request will be held back until
previous requests have been completed.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05 18:07:44 -05:00