This patch adds implementation of handling IRQ
of other receiver's receive cancellation request.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds epstop_task.
This task is used to process other receiver's
cancellation request.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds update_zone_task.
Zoning information can be changed by user.
This task is used to monitor if zoning information is
changed or not.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds unshare_watch_task.
Shared buffer's status can be changed into unshared.
This task is used to monitor shared buffer's status.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds force_close_task.
This task is used to close network device forcibly.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds interrupt_watch_task.
This task is used to prevent delay of interrupts.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds net_device_ops.ndo_vlan_rx_add_vid and
net_device_ops.ndo_vlan_rx_kill_vid callback.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds net_device_ops.ndo_tx_timeout callback.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds net_device_ops.ndo_change_mtu.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds net_device_ops.ndo_get_stats64 callback.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds NAPI polling function and receive related work.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds tx_stall_task.
When receiver's buffer is full, sender stops
its tx queue. This task is used to monitor
receiver's status and when receiver's buffer
is avairable, it resumes tx queue.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add raise_intr_rxdata_task.
Extended Socket Network Device is shared memory
based, so someone's transmission denotes other's
reception. In order to notify receivers, sender
has to raise interruption of receivers.
raise_intr_rxdata_task does this work.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds net_device_ops.ndo_start_xmit callback,
which is called when sending packets.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds net_device_ops.ndo_open and .ndo_stop
callback. These function is called when network device
activation and deactivation.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds buffer address regist/unregistration routine.
This function is mainly invoked when network device's
activation (open) and deactivation (close)
in order to retist/unregist shared buffer address.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds ES information acquisition routine.
ES information can be retrieved issuing information
request command. ES information includes which
receiver is same zone.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements platform_driver's .probe and .remove
routine, and also adds board specific private data structure.
This driver registers net_device at platform_driver's .probe
routine and unregisters net_device at its .remove routine.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds hardware cleanup routine to be
invoked at driver's .remove routine.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds hardware initialization routine to be
invoked at driver's .probe routine.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the basic code of FUJITSU Extended Socket
Network Device driver.
When "PNP0C02" is found in ACPI DSDT, it evaluates "_STR"
to check if "PNP0C02" is for Extended Socket device driver
and retrieves ACPI resource information. Then creates
platform_device.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This BQL patch is based on work done by Tino Reichardt.
Tested on 0000:05:00.0: 3Com PCI 3c905C Tornado at ffffc90000e6e000 by running
Flent several times.
Signed-off-by: Loganaden Velvindron <logan@elandsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert says:
====================
ila: Precompute checksums
This patch set:
- Adds argument ot LWT build_state that holds a pointer to the fib
configuration being applied to the new route
- Adds support in ILA to precompute checksum difference for
performance optimization
v2:
- Move return argument in build_state to end of arguments
v3:
- Update the signature for ip6_tun_build_state()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the ILA build state for LWT compute the checksum difference to apply
to transport checksums that include the IPv6 pseudo header. The
difference is between the route destination (from fib6_config) and the
locator to write.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add cfg and family arguments to lwt build state functions. cfg is a void
pointer and will either be a pointer to a fib_config or fib6_config
structure. The family parameter indicates which one (either AF_INET
or AF_INET6).
LWT encpasulation implementation may use the fib configuration to build
the LWT state.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By implementing config_intr & ack_interrupt, now the phy can support
link connect/disconnect interrupt.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the NFC pull request for 4.3.
With this one we have:
- A new driver for Samsung's S3FWRN5 NFC chipset. In order to
properly support this driver, a few NCI core routines needed
to be exported. Future drivers like Intel's Fields Peak will
benefit from this.
- SPI support as a physical transport for STM st21nfcb.
- An additional netlink API for sending replies back to userspace
from vendor commands.
- 2 small fixes for TI's trf7970a
- A few st-nci fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KMsn
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC 4.3 pull request
This is the NFC pull request for 4.3.
With this one we have:
- A new driver for Samsung's S3FWRN5 NFC chipset. In order to
properly support this driver, a few NCI core routines needed
to be exported. Future drivers like Intel's Fields Peak will
benefit from this.
- SPI support as a physical transport for STM st21nfcb.
- An additional netlink API for sending replies back to userspace
from vendor commands.
- 2 small fixes for TI's trf7970a
- A few st-nci fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
__recnt and related fields need to be in its own cacheline for performance
reasons. Commit 61adedf3e3 ("route: move lwtunnel state to dst_entry")
broke that on 32bit archs, causing BUILD_BUG_ON in dst_hold to be triggered.
This patch fixes the breakage by moving the lwtunnel state to the end of
dst_entry on 32bit archs. Unfortunately, this makes it share the cacheline
with __refcnt and may affect performance, thus further patches may be
needed.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 61adedf3e3 ("route: move lwtunnel state to dst_entry")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABCgAGBQJV1cNuAAoJEP5prqPJtc/HA/QIAIV+lmpDuue8FCtudEd6RF2Y
aoLdn4l2fvDNlel6mduY6Lw7u7SXWnVw3wxKrncdX/rxVo5sVNkmt4fiifo7N8Ul
ovb3lBmHueSJ+O+zWaa/yJ7itbI1I0y2RWD+E1aW3j+OxVuXkKzFsNmGAtCSvtNj
se5JCgYIRFUYaX40Ii3ow+FliWxIydjcdFmyViCkxunZVZeYjsGBfHzno6pDBaD4
BuVg07hlIkHCUf/fi0/LFoeq4WGrVDByyr7qRGWDFmmCTRAsa7C9ZdFMnUxWMVLD
HLD89dP9yurjZx1ychhUXjTku1zCl/8AlMD5YnjD0e0m5RhdZg2K56SVnEW1Utc=
=APrv
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.3-20150820' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
this is a pull request of a two patches for net-next.
The first patch is by Nik Nyby and fixes a typo in a function name. The
second patch by Lucas Stach demotes register output to debug level.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy says:
====================
tipc: fix link failover/synch problems
We fix three problems with the new link failover/synch implementation,
which was introduced earlier in this release cycle. They are all related
to situations where there is a very short interval between the disabling
and enabling of interfaces.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes to the link synchronization means that we can now just
drop packets arriving on the synchronizing link before the synch point
is reached. This has lead to significant simplifications to the
implementation, but also turns out to have a flip side that we need
to consider.
Under unlucky circumstances, the two endpoints may end up
repeatedly dropping each other's packets, while immediately
asking for retransmission of the same packets, just to drop
them once more. This pattern will eventually be broken when
the synch point is reached on the other link, but before that,
the endpoints may have arrived at the retransmission limit
(stale counter) that indicates that the link should be broken.
We see this happen at rare occasions.
The fix for this is to not ask for retransmissions when a link is in
state LINK_SYNCHING. The fact that the link has reached this state
means that it has already received the first SYNCH packet, and that it
knows the synch point. Hence, it doesn't need any more packets until the
other link has reached the synch point, whereafter it can go ahead and
ask for the missing packets.
However, because of the reduced traffic on the synching link that
follows this change, it may now take longer to discover that the
synch point has been reached. We compensate for this by letting all
packets, on any of the links, trig a check for synchronization
termination. This is possible because the packets themselves don't
contain any information that is needed for discovering this condition.
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we introduced the new link failover/synch mechanism
in commit 6e498158a8
("tipc: move link synch and failover to link aggregation level"),
we missed the case when the non-tunnel link goes down during the link
synchronization period. In this case the tunnel link will remain in
state LINK_SYNCHING, something leading to unpredictable behavior when
the failover procedure is initiated.
In this commit, we ensure that the node and remaining link goes
back to regular communication state (SELF_UP_PEER_UP/LINK_ESTABLISHED)
when one of the parallel links goes down. We also ensure that we don't
re-enter synch mode if subsequent SYNCH packets arrive on the remaining
link.
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a link goes down, and there is still a working link towards its
destination node, a failover is initiated, and the failed link is not
allowed to re-establish until that procedure is finished. To ensure
this, the concerned link endpoints are set to state LINK_FAILINGOVER,
and the node endpoints to NODE_FAILINGOVER during the failover period.
However, if the link reset is due to a disabled bearer, the corres-
ponding link endpoint is deleted, and only the node endpoint knows
about the ongoing failover. Now, if the disabled bearer is re-enabled
during the failover period, the discovery mechanism may create a new
link endpoint that is ready to be established, despite that this is not
permitted. This situation may cause both the ongoing failover and any
subsequent link synchronization to fail.
In this commit, we ensure that a newly created link goes directly to
state LINK_FAILINGOVER if the corresponding node state is
NODE_FAILINGOVER. This eliminates the problem described above.
Furthermore, we tighten the criteria for which packets are allowed
to end a failover state in the function tipc_node_check_state().
By checking that the receiving link is up and running, instead of just
checking that it is not in failover mode, we eliminate the risk that
protocol packets from the re-created link may cause the failover to
be prematurely terminated.
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Noam Camus says:
====================
*** nps_enet fixups ***
Change v2
TX done is handled back with NAPI poll.
Change v1
This patch set is a bunch of fixes to make nps_enet work correctly with
all platforms, i.e. real device, emulation system, and simulation system.
The main trigger for this patch set was that in our emulation system
the TX end interrupt is "edge-sensitive" and therefore we cannot use the
cause register since it is not sticky.
Also:
TX is handled during HW interrupt context and not NAPI job.
race with TX done was fixed.
added acknowledge for TX when device is "level sensitive".
enable drop of control frames which is not needed for regular usage.
So most of this patch set is about TX handling, which is now more complete.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We define buf_int_enable in the minimal namespace it is used.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed for when TX done interrupt is in
"level mode".
For example it is true for some simulators of this device.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We set controller to drop control frames and not trying
to pass them on. This is only needed for debug reasons.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to set tx_skb pointer before send frame.
If we receive interrupt before we set pointer we will try
to free SKB with wrong pointer.
Now we are sure that SKB pointer will never be NULL during
handling TX done and check is removed.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When interrupt is received we read directly from control
register for RX/TX instead of reading cause register
since this register fails to indicate TX done when
TX interrupt is "edge mode".
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert says:
====================
gro: Fixes for tunnels and GRO
This patch set addresses some issue related to tunneling and GRO:
- Fix remote checksum offload to properly deal with frag0 in GRO.
- Add support for GRO at VXLAN tunnel (call gro_cells)
Testing: Ran one netperf TCP_STREAM to highlight impact of different
configurations:
GUE
Zero UDP checksum
4628.42 MBps
UDP checksums enabled
6800.51 MBps
UDP checksums and remote checksum offload
7663.82 MBps
UDP checksums and remote checksum offload using no-partial
7287.25 MBps
VXLAN
Zero UDP checksum
4112.02
UDP checksums enabled
6785.80 MBps
UDP checksums and remote checksum offload
7075.56 MBps
v2:
- Drop "gro: Pull headers into skb head for 1st skb in gro list"
from patch set
- In vxlan_remcsum and gue_remcsum return immediately if remcsum
processing was already done
- Add gro callbacks for sit offload
- Use WARN_ON_ONCE if we get a GUE protocol that does not have
GRO offload support
v3:
- Don't restore gro callbacks for sit offload
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Do WARN_ON_ONCE instead of WARN_ON in gue_gro_receive when the offload
callcaks are bad (either don't exist or gro_receive is not specified).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add calls to gro_cells infrastructure to do GRO when receiving on a tunnel.
Testing:
Ran 200 netperf TCP_STREAM instance
- With fix (GRO enabled on VXLAN interface)
Verify GRO is happening.
9084 MBps tput
3.44% CPU utilization
- Without fix (GRO disabled on VXLAN interface)
Verified no GRO is happening.
9084 MBps tput
5.54% CPU utilization
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The remote checksum offload GRO did not consider the case that frag0
might be in use. This patch fixes that by accessing headers using the
skb_gro functions and not saving offsets relative to skb->head.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If you simply load and unload the module without starting the interfaces,
the queues are never created and you get a bad pointer dereference.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current Secure port mode requires the port-based VLANs to also be
valid in the 802.1Q VLAN Table Unit. The current hardware bridging
support only configures the port-based VLANs, thus is broken.
A new patchset is required to adapt the hardware bridging code to fully
support the Secure port mode.
In the meantime, change the 802.1Q mode of every ports to Fallback,
which filtering is more permissive, and doesn't add this restriction to
handle port-based and tagged-based VLANs.
Fixes: 8efdda4a1b ("net: dsa: mv88e6xxx: use port 802.1Q mode Secure")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
err_out_vnic_unregister is used regardless of whether
SRIOV is enabled or not.
Reported-by: Jesse Brandeburg <jesse.brangeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
This is second pull request includes the conflict resolution patch that
resulted from the updates that we got for the conntrack template through
kmalloc. No changes with regards to the previously sent 15 patches.
The following patchset contains Netfilter updates for your net-next tree, they
are:
1) Rework the existing nf_tables counter expression to make it per-cpu.
2) Prepare and factor out common packet duplication code from the TEE target so
it can be reused from the new dup expression.
3) Add the new dup expression for the nf_tables IPv4 and IPv6 families.
4) Convert the nf_tables limit expression to use a token-based approach with
64-bits precision.
5) Enhance the nf_tables limit expression to support limiting at packet byte.
This comes after several preparation patches.
6) Add a burst parameter to indicate the amount of packets or bytes that can
exceed the limiting.
7) Add netns support to nfacct, from Andreas Schultz.
8) Pass the nf_conn_zone structure instead of the zone ID in nf_tables to allow
accessing more zone specific information, from Daniel Borkmann.
9) Allow to define zone per-direction to support netns containers with
overlapping network addressing, also from Daniel.
10) Extend the CT target to allow setting the zone based on the skb->mark as a
way to support simple mappings from iptables, also from Daniel.
11) Make the nf_tables payload expression aware of the fact that VLAN offload
may have removed a vlan header, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=s0Ql
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
leak in the Exynos cpufreq driver.
Specifics:
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma)"
* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
ACPI / video: Fix circular lock dependency issue in the video-detect code
Taku Izumi