Ceiling value may be miss-aligned with what's actually configured into the
ARR register. This is seen after probe as currently the ARR value is zero,
whereas ceiling value is set to the maximum. So:
- reading ceiling reports zero
- in case the counter gets enabled without any prior configuration,
it won't count.
- in case the function gets set by the user 1st, (priv->ceiling) is used.
Fix it by getting rid of the cached "priv->ceiling" variable. Rather use
the ARR register value directly by using regmap read or write when needed.
There should be no drawback on performance as priv->ceiling isn't used in
performance critical path.
There's also no point in writing ARR while setting function (sms), so
it can be safely removed.
Fixes: ad29937e20 ("counter: Add STM32 Timer quadrature encoder")
Suggested-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1614793789-10346-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ceiling value isn't checked before writing it into registers. The user
could write a value higher than the counter resolution (e.g. 16 or 32 bits
indicated by max_arr). This makes most significant bits to be truncated.
Fix it by checking the max_arr to report a range error [1] to the user.
[1] https://lkml.org/lkml/2021/2/12/358
Fixes: ad29937e20 ("counter: Add STM32 Timer quadrature encoder")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1614696235-24088-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When in SLAVE_MODE_DISABLED mode, the count still increases if the
counter is enabled because an internal clock is used. This patch fixes
the stm32_count_function_get() and stm32_count_function_set() functions
to properly handle this behavior.
Fixes: ad29937e20 ("counter: Add STM32 Timer quadrature encoder")
Cc: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20210226012931.161429-1-vilhelm.gray@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The stm32-timer-cnt driver doesn't use the iio interface. The iio headers
aren't relevant and can be removed as reported by William in [1].
With this change, mod_devicetable.h needs to be added to define the
'of_device_id' struct.
[1] https://lkml.org/lkml/2020/2/10/1516
Reported-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add suspend/resume PM sleep ops. When going to low power, enforce the
counter isn't active. Gracefully restore its state upon resume in case
it's been left enabled prior to suspend.
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The count_read and count_write callbacks are simplified to pass val as
unsigned long rather than as an opaque data structure. The opaque
counter_count_read_value and counter_count_write_value structures,
counter_count_value_type enum, and relevant counter_count_read_value_set
and counter_count_write_value_get functions, are removed as they are no
longer used.
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is an if statement that is indented one level too deeply,
remove the extraneous tabs.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement counter part of the STM32 timer hardware block by using
counter API. Hardware only supports X2 and X4 quadrature modes. A
ceiling value can be set to define the maximum value reachable by the
counter.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Co-authored-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabrice Gasnier