Commit Graph

14739 Commits

Author SHA1 Message Date
Thomas Hellstrom ac05dbc57e drm: Make control nodes master-less v3
Like for render-nodes, there is no point in maintaining the master concept
for control nodes, so set the struct drm_file::master pointer to NULL.

At the same time, make sure DRM_MASTER | DRM_CONTROL_ALLOW ioctls are always
allowed when called through the control node. Previously the caller also
needed to be master.

v2: Adapt to refactoring of ioctl permission check.
v3: Formatting of logical expression. Use drm_is_control_client() instead of
    drm_is_control().

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-28 14:19:01 +01:00
Thomas Hellstrom c266735561 drm: Break out ioctl permission check to a separate function v2
Helps reviewing and understanding these checks.
v2: Remove misplaced newlines.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-28 14:19:01 +01:00
Thomas Hellstrom 09f308f7b6 drm: Have the crtc code only reference master from legacy nodes v2
control- and render nodes are intended to be master-less.

v2: Replace tests for !legacy with tests for !mode_group for readability.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-28 14:19:01 +01:00
Dave Airlie 60f2b4af12 drm/i915: fix build warning on 32-bit (v2)
/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c: In function ‘i915_parse_cmds’:
/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c:405:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 has type ‘int’ [-Wformat=]
    DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X length=%d batchlen=%ld\n",
    ^

Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 13:40:48 +10:00
Lespiau, Damien 0ed0298353 drm: Remove the ', ' after the function name in debug logs
Right now a debug message looks like:

  [drm:drm_ioctl], pid=860, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC

That first comma looks weird as we already have ']' as a separator.
Remove it.

If anyone sees this commit message and also thinks that auth=1 isn't the
most useful info to have here, let's just say I'd happily review a patch
removing it. If I don't get annoyed enough to submit a patch, that is.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:56 +10:00
Lespiau, Damien 1287aa903f drm: Remove the prefix argument of drm_ut_debug_printk()
This is always DRM_NAME, so we can just make it part of the format
string instead of asking prink to do it for us.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:45 +10:00
Lespiau, Damien 1288c19fbe drm: drm_ut_debug_printk() isn't called with NULL anywmore
The DRM_LOG* macros where the only sites where drm_ut_debug_printk was
called with NULL arguments for prefix and function_name. Now that they
are gone, we can remove that case.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:42 +10:00
Lespiau, Damien a73d4e91fb drm: Pull the test on drm_debug in the logging macros
In the logging code, we are currently checking is we need to output in
drm_ut_debug_printk(). This is too late. The problem is that when we write
something like:

    DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
                     connector->base.id,
                     drm_get_connector_name(connector),
                     connector->encoder->base.id,
                     drm_get_encoder_name(connector->encoder));

We start by evaluating the arguments (so call drm_get_connector_name() and
drm_get_connector_name()) before ending up in drm_ut_debug_printk() which will
then does nothing.

This means we execute a lot of instructions (drm_get_connector_name(), in turn,
calls snprintf() for example) to happily discard them in the normal case,
drm.debug=0.

So, let's put the test on drm_debug earlier, in the macros themselves.
Sprinkle an unlikely() as well for good measure.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:36 +10:00
Lespiau, Damien 29139e4b33 drm/i915: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:10 +10:00
Lespiau, Damien c7cc51246a drm/gma500: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:08 +10:00
Lespiau, Damien 133dcdebb2 drm/exynos: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:04 +10:00
Daniel Vetter 8ee661b505 drm/i915: Undo gtt scratch pte unmapping again
It apparently blows up on some machines. This functionally reverts

commit 828c79087c
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Wed Oct 16 09:21:30 2013 -0700

    drm/i915: Disable GGTT PTEs on GEN6+ suspend

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841
Reported-and-Tested-by: Brad  Jackson <bjackson0971@gmail.com>
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:33:50 +10:00
Dave Airlie c53c6beddc drm/radeon: fix runtime suspend breaking secondary GPUs
Same fix as for nouveau, when we fail with EINVAL, subsequent
gets fail hard, causing the device not to open.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-03-28 12:27:25 +10:00
Dave Airlie adbbdbac04 drm/nouveau: fail runtime pm properly.
If we were on a non-optimus device, we'd return -EINVAL, this would
lead to the over engineered runtime pm system to go into an error
state, subsequent get_sync's would fail, so we'd never be able
to open the device again.

(like really get_sync shouldn't fail if the device isn't powered
down).

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-03-27 02:20:37 +00:00
Dave Airlie 347cf10aed drm/udl: take reference to device struct for dma-bufs
this stops the device from being deleted before all the dma-bufs
on it are freed, this fixes an oops when you unplug a udl device while
it has imported a buffer from another device.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-27 02:19:50 +00:00
Arnd Bergmann 90bde571ad drm/bridge: PTN3460 needs DRM_KMS_HELPER
The recently added PTN3460 device driver uses interfaces that
are provided by the KMS helper infrastructure, so we should
explicitly select that to avoid this linker error:

ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!
ERROR: "drm_helper_connector_dpms" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!

We have to drop the I2C dependency to avoid a circular dependency
chain, but that's ok because DRM already selects I2C.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-27 12:03:12 +10:00
Dave Airlie e954a2044e Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
- first stage of (ongoing) gpu fault recovery work
- initial support for maxwell (binary driver fw needed)
- various random fixes across the board

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits)
  drm/nouveau: fix missing newline
  drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses
  drm/nouveau/therm: let the vbios decide on the automatic fan management mode
  drm/nvd7/therm: handle another kind of PWM fans
  drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
  drm/nouveau: fix small thinko in vblank timestamping.
  drm/nouveau/therm: check for sensor presence with requested mode, not current
  drm/nouveau/disp/dp: allow 540MHz data rate
  drm/nouveau: recognise higher link rate for available dp bw calculations
  drm/nouveau/disp: limit dp capabilities as per dcb
  drm/nva3/fbram: restrict training pattern setup to GT218
  drm/nva3/devinit: restrict script access to some PFB regs
  drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok
  drm/nouveau/bios: have strap reads show on devinit spam debug level
  drm/nv50/gpio: fixup reset for gpios >= 16
  drm/nv50/gpio: exclude sense value from mask when changing registers
  drm/gk104/gr: therm magic needed on some kepler boards
  drm/gm107/gr: initial support
  drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx
  drm/nouveau/bios: parsing of some random table needed to bring up gr
  ...
2014-03-26 14:34:16 +10:00
Alexandre Courbot 40189b0c65 drm/nouveau: fix missing newline
Add a missing newline at the end of a DRM_INFO message.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:26 +10:00
Martin Peres 18acc6d84e drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses
Other kind of accesses are unreliable on Kepler cards. As advised by NVIDIA,
let's only use 32-bit accesses to fetch the vbios from PROM.

This fixes vbios fetching on my nve7 which failed in certain specific
conditions.

I suggest we Cc stable, for all kernels they still maintain after the big
rewrite.

Suggested-by: Christian Zander <czander@nvidia.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:26 +10:00
Martin Peres 0e994d6456 drm/nouveau/therm: let the vbios decide on the automatic fan management mode
This should fix automatic fan management on fermi cards who do not have
0x46 entries in the thermal table.

On my nve6, the blob sets the default linear range from 40°C to 100°C
but my nvcf's default values are 40°C to 85°C. Let's keep 85 as a default
for everyone.

Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:25 +10:00
Martin Peres 9c9191aaf8 drm/nvd7/therm: handle another kind of PWM fans
This should fix fan management on many nvd7+ chipsets.

Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:24 +10:00
Martin Peres 61679fe153 drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
This should fix a deadlock that has been reported to us where fan_update()
would hold the fan lock and try to grab the alarm_program_lock to reschedule
an update. On an other CPU, the alarm_program_lock would have been taken
before calling fan_update(), leading to a deadlock.

We should Cc: <stable@vger.kernel.org> # 3.9+

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Timothée Ravier <tim@siosm.fr>
Tested-by: Boris Fersing (IRC nick fersingb, no public email address)
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:24 +10:00
Mario Kleiner 6c3252bc83 drm/nouveau: fix small thinko in vblank timestamping.
*hpos horizontal scanout position doesn't need to be corrected
to count the pixels between hactive end and htotal negative.
That is only needed for *vpos to count lines until end of
vblank for the vblank timestamping.

Use hpos as is without correction.

Removes occassional spikes in timestamps of up to 1 scanline
duration, thereby improves accuracy to about +/- 2 usecs instead
of +/- 12 usecs, wrt. true onset time as measured with high
precision equipment on NV-A5.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:23 +10:00
Ben Skeggs dcd9262b3b drm/nouveau/therm: check for sensor presence with requested mode, not current
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:22 +10:00
Ilia Mirkin cbc53c1679 drm/nouveau/disp/dp: allow 540MHz data rate
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76319
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:22 +10:00
Ben Skeggs 14f97da7e7 drm/nouveau: recognise higher link rate for available dp bw calculations
I should resurrect/merge that cleanup branch to remove the weird
duplication.. One day.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:21 +10:00
Ben Skeggs fc243d7f92 drm/nouveau/disp: limit dp capabilities as per dcb
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:20 +10:00
Ben Skeggs 5ca929b952 drm/nva3/fbram: restrict training pattern setup to GT218
It doesn't look like the others have the registers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:20 +10:00
Ben Skeggs 8687c5d7b1 drm/nva3/devinit: restrict script access to some PFB regs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:19 +10:00
Ben Skeggs 3219adc29c drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:19 +10:00
Ben Skeggs 0a8649f1c6 drm/nouveau/bios: have strap reads show on devinit spam debug level
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:18 +10:00
Ben Skeggs 7730705126 drm/nv50/gpio: fixup reset for gpios >= 16
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:17 +10:00
Ben Skeggs 5cfd48b212 drm/nv50/gpio: exclude sense value from mask when changing registers
Shouldn't effect anything, was just momentarily confusing while looking
at traces.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:17 +10:00
Ben Skeggs 1f1ac3bf2a drm/gk104/gr: therm magic needed on some kepler boards
Not needed everywhere, and potentially not safe to do depending on how
the rest of PTHERM is configured...

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:16 +10:00
Ben Skeggs 6f1e9b99b3 drm/gm107/gr: initial support
Our ucode only partially works at this point, so requiring binary fw
image for now.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:15 +10:00
Ben Skeggs 295cb52be5 drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:15 +10:00
Ben Skeggs bd3cac7bb0 drm/nouveau/bios: parsing of some random table needed to bring up gr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:14 +10:00
Ben Skeggs 085969e6fb drm/nv50/bar: fix plymouth issues on certain efi macbooks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:14 +10:00
Ben Skeggs ecf24de071 drm/nouveau: fix fbcon not being accelerated after suspend
This does *not* (and is not intended to) fix the issue reported by
Christoph Rudorff on the nouveau mailinglist.

The patch proposed (which is similar to this one, but also reorders
whether we disable accel or call fb_set_suspend first), papers over
another problem entirely by avoiding touching the framebuffer.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:13 +10:00
Ben Skeggs 88e98d49a1 drm/gf100-/gr: split ppc state into its subunits
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:12 +10:00
Ben Skeggs 7e19453349 drm/gf100-/gf: split tpc state into its subunits
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:12 +10:00
Ben Skeggs 97af71fa40 drm/gf100-/gr: split gpc state into its subunits
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:11 +10:00
Ben Skeggs c33b1e8c63 drm/gf100-/gr: tidy reg/ctx initval lists, mostly by giving them names
Unit names come from the Android GK20A driver.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:10 +10:00
Ben Skeggs 64e4886b6a drm/gk110/gr: minor adjustment to some random initval
Change from traces of a newer binary driver version.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:10 +10:00
Ben Skeggs 014ffe4799 drm/gk104/gr: minor adjustment to some random initval
Change from traces of a newer binary driver version.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:09 +10:00
Ben Skeggs 4ab31a0804 drm/gf119/gr: fix bug in some random initval
Bug noticed vs traces.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:08 +10:00
Ben Skeggs e21bfd171a drm/gf110/gr: fixup gpc/tpc initvals lists
Differences noted vs traces.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:08 +10:00
Ben Skeggs a6ca1a6546 drm/gk208/gr: minor adjustment to some random initval
Change from traces of a newer binary driver version.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:07 +10:00
Ben Skeggs 8060fad41b drm/gf108/gr: minor adjustment to some random initval
Bug noticed vs traces.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:06 +10:00
Ben Skeggs eeb0558e07 drm/gf104/gr: rename gf104 (nvc4), it came before gf106 (nvc3)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:06 +10:00
Ben Skeggs 6acc09b99d drm/nvc0-/graph: fix gpccs fuc stack setup
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:05 +10:00
Ben Skeggs 457e77b264 drm/nouveau/bios: add more checks to PRAMIN image fetching
Prevents an attempt to access VRAM on an un-posted board, which, on a
particular system with a GRID K1 installed, causes a MCE and chokes
the entire system.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:05 +10:00
Alexandre Courbot 420b946977 support for platform devices
Upcoming mobile Kepler GPUs (such as GK20A) use the platform bus instead
of PCI to which Nouveau is tightly dependent. This patch allows Nouveau
to handle platform devices by:

- abstracting PCI-dependent functions that were typically used for
  resource querying and page mapping,
- introducing a nv_device_is_pci() function that allows to make
  PCI-dependent code conditional,
- providing a nouveau_drm_platform_probe() function that takes a GPU
  platform device to be probed.

Core code as well as engine/subdev drivers are updated wherever possible
to make use of these functions. Some older drivers are too dependent on
PCI to be properly updated, but all newer code on which future chips may
depend should at least be runnable with platform devices.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:08:04 +10:00
Ben Skeggs 0b681687fe drm/nouveau: support modesetting on GM107
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:01:00 +10:00
Ben Skeggs 3f204647cd drm/gm100/device: recognise GM107
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:01:00 +10:00
Ben Skeggs c68c29c04c drm/gm107/disp: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:59 +10:00
Ben Skeggs f6bad8abc6 drm/gm107/ltcg: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:58 +10:00
Ben Skeggs 6bd9293ea8 drm/nouveau/bios: add HDMI-C (mini) connector type
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:58 +10:00
Ben Skeggs 267dcb6643 drm/gm107/fb: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:57 +10:00
Ben Skeggs 57f7422016 drm/gk20a/timer: initial implementation
A bit different from NVIDIA's RFC patch, but I want this now for GM107.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:56 +10:00
Ben Skeggs 13a49a10a0 drm/gm100/bios: hw disable register has moved
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:56 +10:00
Ben Skeggs 4bf23ead3a drm/gm107/devinit: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:55 +10:00
Ben Skeggs 56b2f68c17 drm/nve0/fifo: bind intr
Error code names from Android GK20A driver.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:54 +10:00
Ben Skeggs 129dcca79c drm/nve0/fifo: attempt to recover from engine ctxsw timeouts
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:54 +10:00
Ben Skeggs 98d1e317e5 drm/nve0/fifo: attempt to recover engines from mmu faults
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:53 +10:00
Ben Skeggs 448a4532a0 drm/nve0/fifo: allow copy engine channel to be looked up by instance
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:53 +10:00
Ben Skeggs 5c0633e6ee drm/nve0/fifo: use runlist event instead of polling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:52 +10:00
Ben Skeggs 87032e11d9 drm/nve0/fifo: allow channels to be marked as unrunnable
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:51 +10:00
Ben Skeggs 0a7760e0b3 drm/nve0/fifo: single printk for sched error data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:51 +10:00
Ben Skeggs 885f3ced1a drm/nve0/fifo: single printk for mmu fault data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:50 +10:00
Ben Skeggs 3d61b967d2 drm/nve0/fifo: ack pb intr individually after handling each unit
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:49 +10:00
Ben Skeggs 138b873fdf drm/nve0/fifo: runlist intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:49 +10:00
Ben Skeggs c074bdbc92 drm/nve0/fifo: engine intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:48 +10:00
Ben Skeggs 7a42f492a3 drm/nve0/fifo: mask unhandled intr bits when seen, rather than all intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:48 +10:00
Ben Skeggs 61fdf62093 drm/nvc0/fifo: attempt to recover from engine ctxsw timeouts
My test cases don't seem to trigger this on all Fermi boards, not sure
if they're broken tests or it didn't work until later versions.

GF119 definitely works.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:47 +10:00
Ben Skeggs 24e8341e4c drm/nvc0/fifo: attempt to recover engines from mmu faults
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:46 +10:00
Ben Skeggs 33f8c6d03e drm/nvc0/fifo: use subdev identifiers for bar/ifb fault recovery cases
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:46 +10:00
Ben Skeggs 3cf6290a1d drm/nvc0/fifo: use runlist event instead of polling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:45 +10:00
Ben Skeggs e2822b7aea drm/nvc0/fifo: allow channels to be marked as unrunnable
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:44 +10:00
Ben Skeggs 4047653925 drm/nvc0/fifo: sched intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:44 +10:00
Ben Skeggs d439a5acbc drm/nvc0/fifo: single printk for mmu fault data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:43 +10:00
Ben Skeggs 083c214241 drm/nvc0/fifo: ack pb intr individually after handling each unit
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:43 +10:00
Ben Skeggs a07d0e768c drm/nvc0/fifo: runlist intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:42 +10:00
Ben Skeggs e99bf010da drm/nvc0/fifo: engine intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:41 +10:00
Ben Skeggs 22a7a27b18 drm/nvc0/fifo: mask unhandled intr bits when seen, rather than all intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:41 +10:00
Ben Skeggs 0357466d7e drm/nvc0/fifo: rename a couple of units
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:40 +10:00
Ben Skeggs 4b6c6fb5b9 drm/nvd0/disp: add debugging to show which supervisor actions are taken
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:39 +10:00
Ben Skeggs 9cf6ba20b4 drm/nv50-/disp: dump channel state when update method fails
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:39 +10:00
Ben Skeggs b62b9ec2eb drm/nv50-/disp: allow dumping core channel state at first supervisor intr
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:38 +10:00
Ben Skeggs d67d92c066 drm/nv50-/disp: add method descriptions for debugging
Lists of known methods for the DMA channel classes, and mappings to
their priv register addresses (where known).

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 14:00:37 +10:00
Ben Skeggs 117e16335b drm/nv50/disp: decode the known error codes to human readable form
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:33 +10:00
Ben Skeggs a8f8b4891d drm/nv50/disp: preparation for storing static class data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:33 +10:00
Ben Skeggs 70a3e64795 drm/nouveau/core: extend width of engine mask for namedb
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:33 +10:00
Ilia Mirkin 8db3a740b0 drm/nouveau/bios: fix INDEX_ADDRESS_LATCHED trace printout
Having a \n in the middle of a format string means that the next line
doesn't get the prefixes unlike every other line printed by the trace.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:33 +10:00
Ilia Mirkin 46a7b62596 drm/nv50/gr: decode texture trap status code
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:33 +10:00
Ilia Mirkin c33e05a136 drm/nouveau: use nv_debug for NV_DEBUG, make DRM a separate subflag
It's really confusing for NV_DEBUG's printing to be controlled via
drm.debug while everything else is controlled via nouveau.debug. These
messages can be turned on with nouveau.debug=DRM=debug.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:32 +10:00
Ilia Mirkin 46941b0fb6 drm/nouveau: make hdmi device finding failure prints debug level
The hdmi device is required for runtime pm. However it is not available
on many esp older devices, which were all seeing these error messages.
Take this opportunity to also convert to nv_debug instead of the DRM_*
messages, like the rest of nouveau does.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:32 +10:00
Alexandre Courbot 02f0b8c895 drm/nve0/fifo: allocate usermem as needed
Memory was always allocated for 4096 channels. Change this to allocate
what we actually need according to the number of channels we use.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:32 +10:00
Alexandre Courbot b6c4285afa drm/nouveau: handle -EACCES runtime PM return code
pm_runtime_get*() may return -EACCES to indicate a device does not have
runtime PM enabled. This is currently the case with platform devices
on Nouveau, and is not an error in that context. Handle this case
without failure.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:32 +10:00
Ilia Mirkin ef98c1f7b3 drm/nouveau/abi16: fix handles past the 32nd one
abi16->handles is a u64, so make sure to use 1ULL << val when modifying.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:32 +10:00
Ilia Mirkin 73970c47be drm/nouveau: replace ffsll with __ffs64
The ffsll function is a lot slower than the __ffs64 built-in which
compiles to a single instruction on 64-bit. It's also nice to avoid
custom versions of standard functions. Note that __ffs == ffs - 1.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:31 +10:00
Jingoo Han 0ac4e3a58d drm/nouveau/hwmon: replace strict_strtol() with kstrtol()
The usage of strict_strtol() is not preferred, because
strict_strtol() is obsolete. Thus, kstrtol() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:31 +10:00
Dan Carpenter aa34efeddb drm/nouveau/hwmon: remove some redundant checks
No need to check "ret" twice in a row.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:31 +10:00
Ilia Mirkin 4ac1b1a29f drm/nv50/graph: update status enum names
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-03-26 13:59:31 +10:00
Marek Olšák 020ff54676 drm/radeon: set PIPE_CONFIG for 1D and linear tiling modes on CIK
This fixes fast color clear with 1D-tiled single-sample surfaces
and Hyper-Z corruption with 1D-tiled depth surfaces.

Even though it seems it is not needed for 1D tiling, CMASK and HTILE are
always 2D-tiled, thus the hw needs to know the actual pipe configuration
for CMASK and HTILE addressing no matter what the tiling mode of the surface
is.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:24 +01:00
Alex Deucher ab8f1a2a0a drm/radeon: use drm_dp_dpcd_read_link_status()
Replace the radeon specific version with the generic version.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:23 +01:00
Alex Deucher 496263bf2b drm/radeon: use the new drm helpers for dp aux
Switch to the new dp helpers.  The main difference is
that the DP helpers don't allow an adjustable delay in
the aux transaction, but I don't know that this is
necessary.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:21 +01:00
Alex Deucher 743b1e32f2 drm/dp: make aux retries less chatty
Switch to debug only to avoid flooding the logs.
This mirrors the behavior in some other drivers.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:20 +01:00
Alex Deucher dca0be0d85 drm/radeon: clarify special handling in i2c over aux
We need a special packet for the start and end of the
transaction.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:18 +01:00
Alex Deucher 6f50e07587 drm/radeon/atom: rework encoder enable/disable sequence
This more closely matches what the vbios does and also
adds a quirk for travis lvds displays and powers down
the sink on DP displays which saves some power and may
fix display issues in some cases.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:17 +01:00
Alex Deucher 2953da1589 drm/radeon/dp: move sink power control to a separate function
This will be used elsewhere.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:15 +01:00
Alex Deucher f3381dfc97 drm/radeon/dp: use i2c_get_adapdata rather than casting
Minor code cleanup.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
2014-03-25 13:13:13 +01:00
Dave Airlie a5a2391e27 Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Highlights
----------

Re-factoring works over the exynos drm framework.
  - drm_crtc, drm_encoder/drm_connector are implemented by sub drivers
    directly.
  - Removing pm interfaces from each sub driver, and implementing them
    at top level of exynos drm.
Add DisplayPort Transmitter driver.
  - Just moving existing driver from drivers/vides/exynos into
    drivers/gpu/drm/exynos.
Add new LVDS bridge driver, PTN3460.
  - Placed in drivers/gpu/drm/bridge, and this device is used to transfer
    image signal from DP(DisplayPort) to LVDS Panel.
    So this driver will be used with DP driver moved into exynos drm.
Add parallel panel support
  - With the re-factoring patch series, existing parallel panel support was
    broken by moving exynos_drm_display ops into each real connector driver,
    DP. So this patch series adds a new parallel panel module,
    exynos_drm_dpi, for supporting parallel panel, and also adds relevant
    bindings.
Some fixups and cleanups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (45 commits)
  drm/exynos: fimd: remove unused variable
  ARM: dts: exynos4210-universal: add exynos/fimd node
  drm/exynos: restore parallel output interface support
  exynos/fimd: add parallel output related bindings
  drm/exynos: correct timing porch conversion
  drm/exynos: init kms poll after creation of connectors
  drm/exynos: delay fbdev initialization until an output is connected
  drm/exynos: fix unnecessary resource cleanup
  drm/exynos: hdmi: use i2c_adapter instead of i2c_client
  drm/exynos: hdmi: consider APB PHY
  drm/exynos: Remove the exynos_drm_connector shim
  drm/exynos: Implement lvds bridge discovery to DP driver
  drm/bridge: Add PTN3460 bridge driver
  drm/exynos: Implement drm_connector directly in vidi driver
  drm/exynos: Implement drm_connector directly in dp driver
  drm/exynos: Implement drm_connector in hdmi directly
  drm/exynos: Add create_connector callback
  drm/exynos: Consolidate suspend/resume in drm_drv
  drm/exynos: Clean up FIMD power on/off routines
  drm/exynos: Implement dpms display callback in DP
  ...
2014-03-24 08:58:20 +10:00
Daniel Vetter c46145aee1 drm/gma500: add locking to fixed panel edid probing
With the recent addition of locking checks in

commit 62ff94a549
Author:     Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.

Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.

Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-24 07:54:30 +10:00
Daniel Vetter 060c877848 drm/i915: add locking to fixed panel edid probing
With the recent addition of locking checks in

commit 62ff94a549
Author:     Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.

Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.

Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-24 07:54:29 +10:00
Andrzej Hajda 1d531062cd drm/exynos: fimd: remove unused variable
The patch removes unused vidcon0 field from fimd_context structure.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:41 +09:00
Andrzej Hajda 14b6873a01 drm/exynos: restore parallel output interface support
The patch adds parallel output interface to FIMD device driver.
It also restores support for panels initialized by boot loader,
but without proper kernel driver.
Driver uses video interface bindings to find connected panel.
It uses drm_panel interface to interact with the panel.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:40 +09:00
Andrzej Hajda 8b4cad2353 drm/exynos: correct timing porch conversion
The patch corrects porch calculation. It should
be calculated as a difference between adjacent
respective fields of drm_display_mode.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:39 +09:00
Andrzej Hajda 8e527f0187 drm/exynos: init kms poll after creation of connectors
KMS poll init helper should be run when connectors are created,
otherwise it will not schedule connection detector.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:39 +09:00
Andrzej Hajda 25928a395e drm/exynos: delay fbdev initialization until an output is connected
In case fbdev is initialized before any output is connected,
fb resolution defaults to 1024x768. After that any output with
bigger resolution is ignored and fbdev is not displayed.
The patch postpones fbdev initialization to avoid such situation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:39 +09:00
Inki Dae d2ba65f6a1 drm/exynos: fix unnecessary resource cleanup
This patch removes unnecessary drm_mode_config_cleanup call.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-03-24 00:36:38 +09:00
Inki Dae 8fa04aae2a drm/exynos: hdmi: use i2c_adapter instead of i2c_client
This patch changes i2c_client for ddc to i2c_adapter
because ddc needs only i2c_adapter.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-03-24 00:36:38 +09:00
Inki Dae bfe4e84c6b drm/exynos: hdmi: consider APB PHY
This patch returns error in case of using APB PHY.

Exynos5420 SoC and maybe later would use APB PHY instead of
I2C PHY so such case should be considered.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-03-24 00:36:38 +09:00
Sean Paul 90672f92ca drm/exynos: Remove the exynos_drm_connector shim
This path removes the exynos_drm_connector code since it was just
passing hooks through display_ops. The individual device drivers are now
responsible for implementing drm_connector directly.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:38 +09:00
Sean Paul 1634ba256d drm/exynos: Implement lvds bridge discovery to DP driver
This patch implements the lvds bridge discovery and connector pre-emption
code to the dp driver.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:37 +09:00
Sean Paul a9fe713d7d drm/bridge: Add PTN3460 bridge driver
This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS
bridge chip.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:37 +09:00
Sean Paul ce6cb556c9 drm/exynos: Implement drm_connector directly in vidi driver
This patch implements drm_connector directly in the vidi
driver, this will allow us to move away from the exynos_drm_connector
layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:37 +09:00
Sean Paul caa5d1e5a3 drm/exynos: Implement drm_connector directly in dp driver
This patch implements drm_connector directly in the dp driver, this will
allow us to move away from the exynos_drm_connector layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:37 +09:00
Sean Paul d9716ee33a drm/exynos: Implement drm_connector in hdmi directly
This patch implements drm_connector in the hdmi driver directly, instead
of using exynos_drm_connector.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:36 +09:00
Sean Paul c37f42cd18 drm/exynos: Add create_connector callback
This creates a new display hook called create_connector. The purpose is
to allow the display driver to create its own drm_connector instead of
using the exynos_drm_connector. This moves things closer to completely
removing the exynos_drm_connector abstraction.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:36 +09:00
Sean Paul af65c80487 drm/exynos: Consolidate suspend/resume in drm_drv
This patch removes all of the suspend/resume logic from the individual
drivers and consolidates it in drm_drv. This consolidation reduces the
number of functions which enable/disable the hardware to just one -- the
dpms callback. This ensures that we always power up/down in a consistent
manner.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:36 +09:00
Sean Paul a43b933bcb drm/exynos: Clean up FIMD power on/off routines
This patch separates the fimd_activate function into poweron/poweroff
functions to be more consistent with the other drivers in exynos drm. It
also properly cleans up after failures in poweron. The functions have
also been shuffled around such that they are all in the same
spot in the file and poweron/poweroff can be called from the dpms function.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:35 +09:00
Sean Paul 12f5ad6c89 drm/exynos: Implement dpms display callback in DP
This patch implements the dpms display callback for the DP driver.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:35 +09:00
Sean Paul 1417f109a8 drm/exynos: Move display implementation into dp
This patch moves the exynos_drm_display implementation from fimd into
the dp driver. This will allow for tighter integration of the dp driver
into the exynos drm driver.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:35 +09:00
Sean Paul 2e4e678aa8 drm/exynos: Move dp driver from video/ to drm/
This patch moves the code from video/ to drm/. This is required the DP
driver needs to power on/off in the correct order in relation to fimd.
This will also allow the DP driver to participate in drm modeset as well
as provide accurate connection detection and edid.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:34 +09:00
Sean Paul 055e0c0615 drm/exynos: Remove unused/useless fimd_context members
This patch removes a few fimd_context members which are either entirely
unused or unneeded.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:34 +09:00
Sean Paul a968e72771 drm/exynos: Use mode_set to configure fimd
This patch uses the mode passed into mode_set to configure fimd instead
of directly using the panel from context. This will allow us to move
the exynos_drm_display implementation out of fimd, where it doesn't
belong.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:34 +09:00
Sean Paul 4b4052699a drm/exynos: Implement mode_fixup manager operation
This patch adds a new manager callback for mode_fixup and pipes it
through exynos_drm_crtc. This will allow the manager drivers to
alter the mode during modeset.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:33 +09:00
Sean Paul cd706aa8df drm/exynos: Add mode_set manager operation
This patch adds a mode_set callback to the manager operations which
sets the crtc's current mode to the manager driver. This will allow the
fimd  driver to set its mode using values from drm, instead of the dt.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:33 +09:00
Sean Paul a9c4cd2139 drm/exynos: Disable unused crtc planes from crtc
This patch moves the code which disables unused crtc planes from the
encoder to the crtc. Since there is a 1:1 encoder/crtc mapping in
exynos, the only valid crtc change the pre-existing code could catch is
disconnecting an active crtc from the encoder. Thus it is functionally
equivalent to just disable all planes attached to a crtc when the crtc
is disabled.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:33 +09:00
Sean Paul 75626853a7 drm/exynos: Use drm_mode_copy to copy modes
This patch changes the manual copying of mode to adjusted_mode in
mode_fixup to use drm_mode_copy instead of handling things manually.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:32 +09:00
Sean Paul f041b257a8 drm/exynos: Remove exynos_drm_hdmi shim
This patch trims exynos_drm_hdmi out of the driver. The reason it
existed in the first place was to make up for the mixture of
display/overlay/manager ops being spread across hdmi and mixer. With
that code now rationalized, mixer and hdmi map directly to
exynos_drm_crtc and exynos_drm_encoder, respectively. Since there is a
1:1 mapping, we no longer need this layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:32 +09:00
Daniel Kurtz 2b7681326d drm/exynos: hdmi: remove the i2c drivers and use
The i2c client was previously being passed into the hdmi driver via a
dedicated i2c driver, and then a global variable. This patch removes all
of that and just uses the device tree to get the i2c_client. This patch
also properly references the client so we don't lose it before we're
done with it.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
[seanpaul changed to phandle lookup instead of using of node name]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:32 +09:00
Sean Paul 080be03de2 drm/exynos: Split manager/display/subdrv
This patch splits display and manager from subdrv. The result is that
crtc functions can directly call into manager callbacks and encoder
functions can directly call into display callbacks. This will allow
us to remove the exynos_drm_hdmi shim and support mixer/hdmi & fimd/dp
with common code.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:31 +09:00
Sean Paul 3f283d9375 drm/exynos: Use unsigned long for possible_crtcs
Change all instances of possible_crtcs in the exynos drm driver to be
unsigned long. This matches the type used in the drm layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:31 +09:00
Sean Paul 558de5c138 drm/exynos: Don't keep dpms state in encoder
This patch removes the dpms state tracking in encoder. This
state is at best confusing and at worst incorrect since the display
drivers can turn on and off without propagating the value.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:30 +09:00
Sean Paul 54c40dede1 drm/exynos: Rename display_op power_on to dpms
This patch renames the display_op power_on to dpms to accurately reflect
what the function does.

The side-effect of this patch is that the new hdmi dpms callback is now
invoked twice in the dpms path. This is safe and will be dealt with when
the exynos_drm shim goes away.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:30 +09:00
Sean Paul e5b89916bc drm/exynos: Remove dpms link between encoder/connector
This patch removes the call from encoder dpms into connector dpms (which
will then call back into encoder dpms through the helper function). The
callback is likely to keep connector->dpms in the right state when
initiating dpms from crtc or encoder, but this isn't the right way to do
it. This patch is the first step towards rationalizing power management
in the exynos drm driver.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:30 +09:00
Sean Paul 87244fa604 drm/exynos: Remove apply manager callback
This patch removes the apply() manager callback in favor of putting the
relevant commits in the individual drivers. This will mitigate some of
the difference between the suspend/resume path and the dpms path

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:29 +09:00
Sean Paul bb7704d6a6 drm/exynos: Pass exynos_drm_manager in manager ops instead of dev
This patch changes the manager ops callbacks from accepting the subdrv
device pointer to taking a pointer to the manager. This will allow us
to move closer to decoupling manager/display from subdrv, and subsequently
decoupling the crtc/plane from the encoder.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:29 +09:00
Sean Paul 4551789fcf drm/exynos: hdmi: Implement initialize op for hdmi
This patch implements the initialize callback in the hdmi and mixer
manager. This allows us to get rid of drm_dev in the drm_hdmi level and
track it in the mixer and hdmi drivers. This is one of the things
holding back the complete removal of the drm_hdmi layer.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:28 +09:00
Sean Paul 40c8ab4bcc drm/exynos: Use manager_op initialize in fimd
This patch implements the intitialize manager op in fimd. This will
allow us to keep track of drm_dev in context instead of using subdev,
which in turn makes it easier to remove subdev from fimd.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:28 +09:00
Sean Paul 1f9cafc3ad drm/exynos: Add an initialize function to manager and display
This patch adds an initialize function to the manager and display
operations. This allows them to keep track of drm_device in their
local context, as well as adds an initialization hook right after
the encoder is created.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:27 +09:00
Sean Paul 1c6244c30e drm/exynos: Merge overlay_ops into manager_ops
This patch merges overlay_ops into manager_ops. In all cases,
overlay_ops is implemented in the same place as manager ops, it doesn't
serve a functional purpose, and doesn't make things more clear.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:27 +09:00
Shirish S 4615415288 drm/exynos: set the active aspect ratio as per mode
Now that the drm_display_mode also provides aspect
ratio for all resolutions, this patch adds its usage
to set the active aspect ratio of AVI info frame
packets as per CEA-861-D standard's Table 9.

This is also needed to abide by the 7-27
compliance test of HDMI.

Signed-off-by: Shirish S <s.shirish@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:26 +09:00
Shirish S e1d883c0e6 drm/exynos: add phy settings for RB resolutions
This patch adds support for the below mentioned
pixel clocks in Exynos5250.
Without them, following display modes won¡¯t
be supported:

71 MHz 	- 1280x800@60Hz RB
73.25 MHz 	- 800x600@120Hz RB
88.75 MHz 	- 1440x900@60Hz RB
115.5 MHz 	- 1024x768@120Hz RB
119 MHz 	- 1680x1050@60Hz RB

Signed-off-by: Shirish S <s.shirish@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:26 +09:00
Daniel Kurtz 307ceaffb3 drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c
The following commit [0] fixed a use-after-free, but left the subdrv open
in the error path.

[0] commit 6ca605f7c7
drm/exynos: Fix freeing issues in exynos_drm_drv.c

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:26 +09:00
Dave Airlie 3ea8785503 drm/helper: lock all around force mode restore
Since Daniel documented things with a sledge hammer, we got lots of
nice backtraces in suspend/resume operations, I've check the callers
of this and they all seems safe to me,

This fixes one set of warns I reported.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-22 08:05:32 +10:00
Daniel Vetter 53f1904bce drm/fb-helper: improve drm_fb_helper_initial_config locking
The locking in drm_fb_helper_initial_config is a bit troublesome for a
few reasons:

- We can't just wrap the entire function up into modeset locks since
  the fbdev registration might call down into fbcon code, which then
  through our ->set_par implementation needs to be able to grab all
  modeset locks. So we'd have a neat deadlock.

- This implies though that all current callers don't hold any modeset
  locks by necessity, so we have free reign to grab any modeset locks
  we need to grab.

- The private state of the fbdev helper doesn't need any protection
  through locks, since once we have the fbdev registered it is mostly
  invariant or protected through the modeset locking in ->set_par and
  other callbacks. We can fully rely on driver having non-racy setup
  sequences here. For the initial config computation we actually may
  not grab locks since drivers which provide their own magic sauce
  (like i915) might need to grab locks themselves.

- We should grab locks though when we probe outputs. Currently there's
  not much risk, but already now userspace could start poking at sysfs
  files and so probe concurrently. I expect that in the future driver
  init will be much more async, and since probing is really
  time-consuming this is a prime candidate.

- We must not hold any crtc->mutex locks while calling probe functions
  since those might need to lock a crtc for e.g. load detection. i915
  is such a driver.

Also it's the probing calls which hit upon piles of new locking
asserts I've recently added in

commit 62ff94a549
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 6395138505
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

Hence the right fix is to grab the mode_config mutex, but only that
and only right around the probe calls.

It seems to be sufficient to shut up all the locking WARNINGs I see on
i915 and nouveau in drm_fb_helper_initial_config.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-22 08:03:41 +10:00
Daniel Vetter b182cc59a4 drm/crtc-helper: fix locking for drm_helper_disable_unused_functions
We have two calling contexts for thise function:

- In the crtc helper code itself as part of the ->set_config
  implementation. In this calling context all modeset locks are
  already held, as they should.

- In drivers not implementing fastboot before the fbdev/fbcon setup
  and initialization. This has been added for all drivers in

  commit 76a39dbfb2
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Sun Jan 20 23:12:54 2013 +0100

      drm/fb-helper: don't disable everything in initial_config

  In this calling context we do not hold any modeset locks since the
  immediately following call to initialize the fbev emulation grabs
  all these locks themselves.

- There are two exceptions to the above rule: shmob doesn't have fbdev
  emulation support. I've manually checked the callchain up to the
  driver load function and no kms locks are held.

The right fix therefore is to split this helper into an internal and
external version and add the required locking to the function exported
to drivers.

This remedies locking inconsistencies exposed by me adding locking
WARNs as part of the recent kerneldoc abi polishing done in

commit 62ff94a549
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 6395138505
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

v2: It helps when I actually git add the entire thing.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-22 08:03:19 +10:00
Chris Wilson 698b3135ac drm/i915: Include a note about the dangers of I915_READ64/I915_WRITE64
It is important that the user is fully aware that the seemingly atomic
read/write of a 64-bit value from MMIO space, may in fact be 2 separate
operations of 32-bits. This can lead to hilarity, such as

commit d18b961903
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Jul 10 13:36:23 2013 +0100

    drm/i915: Fix incoherence with fence updates on Sandybridge+

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-21 16:13:14 +01:00
Jani Nikula d0a7b6de04 drm/i915/sdvo: fix questionable return value check
intel_sdvo_get_trained_inputs() returns a bool, check the status
accordingly.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-21 16:13:14 +01:00
Chris Wilson df6f783a4e drm/i915: Fix unsafe loop iteration over vma whilst unbinding them
On non-LLC platforms, when changing the cache level of an object, we may
need to unbind it so that prefetching across page boundaries does not
cross into a different memory domain. This requires us to unbind
conflicting vma, but we did so iterating over the objects vma in an
unsafe manner (as the list was being modified as we iterated).

The regression was introduced in
commit 3089c6f239
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Jul 31 17:00:03 2013 -0700

    drm/i915: make caching operate on all address spaces
apparently as far back as v3.12-rc1, but it has only just begun to
trigger real world bug reports.

Reported-and-tested-by: Nikolay Martynov <mar.kolya@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76384
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-21 16:13:08 +01:00
Dave Airlie 55004938f4 Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-next
Summary of what's included:

- SGX MMU support
- SGX IRQ handling (Page faults and blitter fences)
- Minor Cedarview and Poulsbo unification
- Work queue for ASLE interrupt work
- Various cleanups, style fixes and removal of dead code

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500: remove stub .open/postclose
  drm/gma500: Code cleanup - inline documentation
  drm/gma500: Code cleanup - style fixes
  drm/gma500: Code cleanup - removal of centralized exiting of function
  drm/gma500/cdv: Cedarview display cleanups
  drm/gma500: Unify encoder mode fixup
  drm/gma500: Unify _get_core_freq for cdv and psb
  drm/gma500: Move asle interrupt work into a work task
  drm/gma500: Remove dead code
  drm/gma500: Add backing type and base align to psb_gem_create()
  drm/gma500: Remove unused ioctls
  drm/gma500: Always trap MMU page faults
  drm/gma500: Hook up the MMU
  drm/gma500: Add first piece of blitter code
  drm/gma500: Give MMU code it's own header file
  drm/gma500: Add support for SGX interrupts
  drm/gma500: Make SGX MMU driver actually do something
2014-03-21 09:27:07 +10:00
Sagar Kamble 4726e0b045 drm/i915: Enabling 128x128 and 256x256 ARGB Cursor Support
With this patch we allow larger cursor planes of sizes 128x128
and 256x256.

v2: Added more precise check on size while setting cursor plane.

v3: Changes related to restructuring cursor size restrictions
and DRM_DEBUG usage.

v4: Indentation related changes for setting cursor control and
implementing DRM_CAP_CURSOR_WIDTH and DRM_CAP_CURSOR_HEIGHT

Testcase: igt/kms_cursor_crc
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: G, Pallavi <pallavi.g@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 17:35:33 +01:00
Chris Wilson c67a17e972 drm/i915: Print how many objects are shared in per-process stats
The point of this measure is to gauge why a process has a lot of gem
objects in uses and why. Especially for compositors it's interesting
to know whether it's a leak of private objects or just a lot of use
from buffers shared with clients.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add a bit of commit message flesh to address Ben's comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 15:09:36 +01:00
Chris Wilson 6313c20490 drm/i915: Per-process stats work better when evaluated per-process
The idea of printing objects used by each process is to judge how each
process is using them. This means that we need to evaluate whether the
object is bound for that particular process, rather than just whether it
is bound into the global GTT.

v2: Restore the non-full-ppgtt path for simplicity as we may not even
    create vma with older hardware.

v3: Tweak handling of global entries and default context entries.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 15:09:21 +01:00
Ben Widawsky 2a5913a867 drm/i915: remove rps local variables
With the renamed RPS struct members, it's easier to skip the local
variables which no longer clarify anything, and if anything just make
the code harder to read.

The real motivation for this patch is actually the next patch, which
attempts to consolidate some of the functionality.

Cc: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 14:46:07 +01:00
Ben Widawsky 04da7e77e2 drm/i915: Remove extraneous MMIO for RPS
The values created at initialization must always exist to use the
interface. Reading them again is confusing, and pointless.

More cleanups are coming in the next patch. Since I am not 100% certain,
moreover on BYT, (though I am extremely close to that) that there is no
need to leave the MMIO here, I wanted to make it a separate patch for
the bisectable 'just-in-case'

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 14:45:52 +01:00
Ben Widawsky b39fb29773 drm/i915: Rename and comment all the RPS *stuff*
The names of the struct members for RPS are stupid. Every time I need to
do anything in this code I have to spend a significant amount of time to
remember what it all means. By renaming the variables (and adding the
comments) I hope to clear up the situation. Indeed doing this make some
upcoming patches more readable.

I've avoided ILK because it's possible that the naming used for Ironlake
matches what is in the docs. I believe the ILK power docs were never
published, and I am too lazy to dig them up.

v2: leave rp0, and rp1 in the names. It is useful to have these limits
available at times. min_freq and max_freq (which may be equal to rp0, or
rp1 depending on the platform) represent the actual HW min and max.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 14:45:41 +01:00
Ben Widawsky 1f05c944e0 drm/i915: Store the HW min frequency as min_freq
this leaves a temporarily awkward min_delay (the soft limit) with the
new min_freq (the hardware limit). It's fixed in the next patch.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 14:45:29 +01:00
Ben Widawsky 5a953add43 drm/i915: Fix coding style for RPS
Introduced:
commit b8a5ff8d7c
Author: Jeff McGee <jeff.mcgee@intel.com>
Date:   Tue Feb 4 11:37:01 2014 -0600

    drm/i915: Update rps interrupt limits

Cc: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 14:45:16 +01:00
Ben Widawsky d060c16953 drm/i915: Reorganize the overclock code
The existing code (which I changed last) was very convoluted. I believe
it was attempting to skip the overclock portion if the previous pcode
write failed. When I last touched the code, I was preserving this
behavior. There is some benefit to doing it that way in that if the
first pcode access fails, the later is likely invalid.

Having a bit more confidence in my understanding of how things work, I
now feel it's better to have clear, readable, code than to try to skip
over this one operation in an unusual case.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-20 14:45:00 +01:00
Dave Airlie 004e5cf743 Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just fixed resource release issue at open fail.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c
2014-03-20 13:20:00 +10:00
Daniel Kurtz 85d898bf8f drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c
The following commit [0] fixed a use-after-free, but left the subdrv open
in the error path.

[0] commit 6ca605f7c7
drm/exynos: Fix freeing issues in exynos_drm_drv.c

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-20 11:42:24 +09:00
Jean Delvare a386c006a7 ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL
ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-20 02:37:22 +01:00
Dave Airlie e84c20aff1 drm/radeon/kms: merge conflicted badly
Not sure why git didn't flag this, but the result of automerge
from 3.14-rc7 screwed up the radeon init procedure.

Reported-by: Fireburn on #radeon
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-20 11:09:10 +10:00
Dave Airlie 55ae26b795 Merge tag 'drm-intel-fixes-2014-03-19' of git://anongit.freedesktop.org/drm-intel into drm-fixes
two more fixes, both regressions.

* tag 'drm-intel-fixes-2014-03-19' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Disable stolen memory when DMAR is active
  Revert "drm/i915: don't touch the VDD when disabling the panel"
2014-03-20 07:17:31 +10:00
Paulo Zanoni 33688d95c4 drm/i915: init pm.suspended earlier
Function intel_init_runtime_pm is supposed to start allowing runtime
PM from that point, but it's called very late on the driver
initialization code, to prevent the driver from trying to suspend
while still initializing. The problem is that variables are accessed
earlier than that, so initalize them at intel_pm_setup, which is
supposed to be the correct place.

Notice that this shouldn't fix any specific bugs because dev_priv is
zeroed when allocated, so the value is already correct right from the
start.

v2: - Rebase.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:40:35 +01:00
Paulo Zanoni 765dab6752 drm/i915: update the PC8 and runtime PM documentation
Now that PC8 got much simpler, there are less things to document.
Also, runtime PM already has a nice documentation, so we don't need to
re-explain it on our driver.

v2: - Rebase.
    - Fix typo (Jesse).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:40:30 +01:00
Paulo Zanoni a14cb6fc85 drm/i915: rename __hsw_do_{en, dis}able_pc8
After we removed all the intermediate abstractions, we can rename
these functions to just hsw_{en,dis}able_pc8.

v2: - Rebase.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:40:25 +01:00
Paulo Zanoni d688e09550 drm/i915: kill struct i915_package_c8
The only remaining field of the struct was the lock, which was
useless.

v2: - Rebase.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:40:19 +01:00
Paulo Zanoni 5d584b2eca drm/i915: move pc8.irqs_disabled to pm.irqs_disabled
When other platforms add runtime PM support they will also need to
disable interrupts, so move the variable to the runtime PM struct.

Also notice that the longer-term goal is to completely kill the
regsave struct, and I even have patches for that.

v2: - Rebase.
v3: - Rebase.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:39:46 +01:00
Paulo Zanoni 7c8615d8f9 drm/i915: remove dev_priv->pc8.enabled
It was just being used on debugfs and on a WARN inside
hsw_set_power_well. But now that we PC8 is part of runtime PM and we
get/put runtime PM when we get/put any power domain, we shouldn't need
the WARN anymore.

v2: - Rebase.
v3: - Rebase.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:39:41 +01:00
Paulo Zanoni 6a932d88ae drm/i915: don't get/put PC8 when getting/putting power wells
Because we already get/put runtime PM every time we get/put any power
domain, and now PC8 and runtime PM are the same thing.

With this, we can also now kill the hsw_{en,dis}able_package_c8
functions.

v2: - Rebase.
v3: - Rebase.
v4: - Rebase.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:39:37 +01:00
Paulo Zanoni d361ae269f drm/i915: make intel_aux_display_runtime_get get runtime PM, not PC8
Because we merged the PC8 and runtime PM features, so calling
intel_runtime_pm_get now has the same meaning, and we plan to just
remove hsw_disable_package_c8 for this exact reason.

My first patch tried to completely kill
intel_aux_display_runtime_get/put, because I was assuming that whoever
needed more than just runtime PM would have to get the appropriate
power domain instead of that, but it seems some people still want the
intel_aux_display_runtime_get abstraction, so keep it until someone
else tries to replace it with the more-standard power domain calls.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:39:22 +01:00
Paulo Zanoni db8384f2e0 drm/i915: don't get/put PC8 reference on freeze/thaw
We already get runtime PM references, and PC8 is now part of runtime
PM, so this is enough.

v2: - Rebase.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:39:17 +01:00
Paulo Zanoni e1f2de6def drm/i915: remove an indirection level on PC8 functions
After the latest changes, the indirection is useless.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:39:12 +01:00
Paulo Zanoni 34f5754c23 drm/i915: kill pc8.disable_count
Since after the latest patches it's only being used to prevent
getting/putting the runtime PM refcount.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:39:00 +01:00
Paulo Zanoni 43694d69b4 drm/i915: get runtime PM references when the GPU is idle/busy
... instead of PC8 references. Now that both are the same thing and we
are killing PC8, just get the runtime PM reference.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:38:54 +01:00
Paulo Zanoni ba0239e03f drm/i915: remove dev_priv->pc8.requirements_met
The requirements_met variable was used to track two things: enabled
CRTCs and the power well. After the latest chagnes, we get a runtime
PM reference whenever we get any of the power domains, and we get
power domains when we enable CRTCs or the power well, so we should
already be covered, not needing this specific tracking.

v2: - Rebase.
v3: - Rebase.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:38:44 +01:00
Paulo Zanoni 9e6ea71a59 drm/i915: get/put runtime PM when we get/put a power domain
Any power domain will require the HW to be in PCI D0 state, so just do
the simple thing.

Dear maintainer: since intel_display_power_put() and
intel_display_power_get() are almost identical, git-am has failed
apply the patch on my local machine once: it added both chunks to
put(), instead of one chunk to get() and another to put(). When you
apply this patch to your tree, please check if it is correct.

v2: - Add the warning above.
v3: - Rebase.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:38:37 +01:00
Paulo Zanoni a8a8bd547e drm/i915: make PC8 be part of runtime PM suspend/resume
Currently, when our driver becomes idle for i915.pc8_timeout (default:
5s) we enable PC8, so we save some power, but not everything we can.
Then, while PC8 is enabled, if we stay idle for more
autosuspend_delay_ms (default: 10s) we'll enter runtime PM and put the
graphics device in D3 state, saving even more power. The two features
are separate things with increasing levels of power savings, but if we
disable PC8 we'll never get into D3.

While from the modularity point of view it would be nice to keep these
features as separate, we have reasons to merge them:
 - We are not aware of anybody wanting a "PC8 without D3" environment.
 - If we keep both features as separate, we'll have to to test both
   PC8 and PC8+D3 code paths. We're already having a major pain to
   make QA do automated testing of just one thing, testing both paths
   will cost even more.
 - Only Haswell+ supports PC8, so if we want to add runtime PM support
   to, for example, IVB, we'll have to copy some code from the PC8
   feature to runtime PM, so merging both features as a single thing
   will make it easier for enabling runtime PM on other platforms.

This patch only does the very basic steps required to have PC8 and
runtime PM merged on a single feature: the next patches will take care
of cleaning up everything.

v2: - Rebase.
v3: - Rebase.
    - Fully remove the deprecated i915 params since Daniel doesn't
      consider them as part of the ABI.
v4: - Rebase.
    - Fix typo in the commit message.
v5: - Rebase, again.
    - Add a huge comment explaining the different forcewake usage
      (Chris, Daniel).
    - Use open-coded forcewake functions (Daniel).

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:38:25 +01:00
Paulo Zanoni b4d2a9a093 drm/i915: extract __hsw_do_{en, dis}able_package_c8
When we merge PC8 and runtime PM, these new functions are going to be
called by the runtime suspend/resume functions, and their callers are
going to be removed.

v2: - Rebase

Reviewed-by: Imre Deak <imre.deak@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 16:36:57 +01:00
Daniel Vetter b80d6c781e Merge branch 'topic/dp-aux-rework' into drm-intel-next-queued
Conflicts:
	drivers/gpu/drm/i915/intel_dp.c

A bit a mess with reverts which differe in details between -fixes and
-next and some other unrelated shuffling.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 15:54:37 +01:00
Matt Roper 262ca2b08f drm/i915: Rename similar plane functions to avoid confusion
The name 'update_plane' was used both for the primary plane functions in
intel_display.c and the sprite/overlay functions in intel_sprite.c.
Rename the primary plane functions to 'update_primary_plane' to avoid
confusion.

On a similar note, intel_display.c already had a function called
intel_disable_primary_plane() that programs the hardware to disable a
pipe's primary plane.  When we hook up primary planes through the DRM
plane interface, one of the natural handler names will be
intel_primary_plane_disable(), which is very similar.  To avoid
confusion, rename the existing intel_disable_primary_plane() to
intel_disable_primary_hw_plane() to make the two names a little more
distinct.

Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
[danvet: Fix up conflicts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 13:03:54 +01:00
Jesse Barnes 11ea8b7d3e drm/i915/vlv: no MCHBAR on VLV
So don't try to allocate and program it, we're only fooling ourselves.

Reported-by: "Chang, Junxiao" <junxiao.chang@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 10:14:11 +01:00
Ben Widawsky a2319c08bf drm/i915/bdw: Restore PPAT on thaw
Apparently it is wiped out from under us, and we get some really fun
caching artifacts upon resume (it seems to be WB for all types by
default).

Reported-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: James Ausmus <james.ausmus@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76113
Tested-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 09:44:48 +01:00
Chris Wilson 0f4706d274 drm/i915: Disable stolen memory when DMAR is active
We have reports of heavy screen corruption if we try to use the stolen
memory reserved by the BIOS whilst the DMA-Remapper is active. This
quirk may be only specific to a few machines or BIOSes, but first lets
apply the big hammer and always disable use of stolen memory when DMAR
is active.

v2 by Jani: Rebase on -fixes, only look at intel_iommu_gfx_mapped.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68535
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-03-19 10:05:38 +02:00
Jani Nikula 825938307f Revert "drm/i915: don't touch the VDD when disabling the panel"
This reverts
commit dff392dbd2
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Fri Dec 6 17:32:41 2013 -0200

    drm/i915: don't touch the VDD when disabling the panel

which didn't take into account

commit 6cb49835da
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun May 20 17:14:50 2012 +0200

    drm/i915: enable vdd when switching off the eDP panel

and

commit 35a38556d9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Aug 12 22:17:14 2012 +0200

    drm/i915: reorder edp disabling to fix ivb MacBook Air

Unsurprisingly, various MacBooks failed.

Effectively the same has already been done in drm-intel-next-queued.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74628
Tested-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-03-19 10:03:57 +02:00
Steven Rostedt 9297ebf29a drm/i915: Do not dereference pointers from ring buffer in evict event
The TP_printk() should never dereference any pointers, because the ring
buffer can be read at some unknown time in the future. If a device no
longer exists, it can cause a kernel oops. This also makes this
event useless when saving the ring buffer in userspaces tools such as
perf and trace-cmd.

The i915_gem_evict_vm dereferences the vm pointer which may also not
exist when the ring buffer is read sometime in the future.

Link: http://lkml.kernel.org/r/1395095198-20034-3-git-send-email-artagnon@gmail.com
Reported-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: stable@vger.kernel.org # 3.13+
Fixes: bcccff847d "drm/i915: trace vm eviction instead of everything"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[danvet: Try to make it actually compile]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-19 08:17:29 +01:00
Damien Lespiau e5081a538a drm/i915: Use the correct format string modifier for ptrdiff_t
When compiling on 32bits, I have the following warning:

drivers/gpu/drm/i915/i915_cmd_parser.c:405:4: warning: format ‘%ld’
expects argument of type ‘long int’, but argument 7 has type ‘int’
[-Wformat=]
    DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X
    length=%d batchlen=%ld\n",

The ptrdiff_t type has its own modifier: 't'.

Cc: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 19:49:42 +01:00
Damien Lespiau fa50ad6148 drm/i915: Rename intel_setup_wm_latency() to ilk_setup_wm_latency()
This function is only used on ILK+, so rename it accordingly.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:39 +01:00
Damien Lespiau 83f26f1697 drm/i915: Remove spurious '()' in WARN macros
No need of any here.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:38 +01:00
Jani Nikula 24f3e092b8 drm/i915: finish off reverting eDP VDD changes
This is a small follow-up fix to the series of eDP VDD back and forth
we've had recently. This is effectively a combined revert of three
commits:

commit 2c2894f698fffd8ff53e1e1d3834f9e1035b1f39
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Fri Mar 7 20:05:20 2014 -0300

    drm/i915: properly disable the VDD when disabling the panel

commit b3064154df
Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Date:   Tue Mar 4 00:42:44 2014 +0100

    drm/i915: Don't just say it, actually force edp vdd

commit dff392dbd2
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Fri Dec 6 17:32:41 2013 -0200

    drm/i915: don't touch the VDD when disabling the panel

which shows that we're pretty close back to where we started
already. The first two were basically reverting the last, but missing
the WARN. Add that back. We also OCD the intel_ prefix back to
intel_edp_panel_vdd_on() which was lost somewhere in between. The circle
closes.

For future reference, "drm/i915: don't touch the VDD when disabling the
panel" failed to take into account

commit 6cb49835da
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun May 20 17:14:50 2012 +0200

    drm/i915: enable vdd when switching off the eDP panel

and

commit 35a38556d9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Aug 12 22:17:14 2012 +0200

    drm/i915: reorder edp disabling to fix ivb MacBook Air

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:38 +01:00
Daniel Vetter 3123fcafe0 drm/i915: catch forcewake reference underruns
Without this the new drv_suspend/forcewake subtest I've created
doesn't result in immediately visible failures.

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:37 +01:00
Ben Widawsky ae89f44d13 drm/i915: Actually capture PP_DIR_BASE on error
I have been seeing this for a long time, but ignored it because it's
typically not terribly important. Recently, I really needed this info,
and it was garbage. Proof that I should have fixed it sooner. Originally
wrong from:

commit 6c7a01ec37
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Thu Jan 30 00:19:40 2014 -0800

    drm/i915: Capture PPGTT info on error capture

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:36 +01:00
Paulo Zanoni 849e39f5d7 drm/i915: properly disable the VDD when disabling the panel
Commit b3064154df tried to revert commit
dff392dbd2, but wasn't complete, which
resulted in regressions on Haswell. So this commit should fix
b3064154df by undoing what it did and
providing an actual complete revert of
dff392dbd2.

Fixes regression introduced by:
commit b3064154df
Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Date:   Tue Mar 4 00:42:44 2014 +0100
    drm/i915: Don't just say it, actually force edp vdd

Testcase: igt/pm_pc8
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:35 +01:00
Mika Kuoppala a95f6a0070 drm/i915: Switch to fake context on older gens
We used to have per file descriptor hang stats for the
i915_get_reset_stats_ioctl() and for default context banning.

commit 0eea67eb26
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Fri Dec 6 14:11:19 2013 -0800

    drm/i915: Create a per file_priv default context

made having separate hangstats in file_private redundant
as i915_hw_context already contained hangstats. So

commit c482972a08
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Fri Dec 6 14:11:20 2013 -0800

    drm/i915: Piggy back hangstats off of contexts

consolidated the hangstats and enabled further improvements.

commit 44e2c0705a
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Thu Jan 30 16:01:15 2014 +0200

    drm/i915: Use i915_hw_context to set reset stats

tried to reap full benefits of consolidation but fell short
as we never 'switch' to the fake private context on gens
that don't have hw_contexts, so request->ctx remained NULL
on those.

Fix this by 'switching' to fake context so that when
request is submitted to ring, proper context gets assigned
to it.

Testcase: igt/drv_hangman
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76055
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:35 +01:00
Daniel Vetter 05efeebd28 drm/i915: Fix up the forcewake timer initialization
This is a regression introduced in

commit 0294ae7b44
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Mar 13 12:00:29 2014 +0000

    drm/i915: Consolidate forcewake resetting to a single function

The reordered setup sequence ended up calling del_timer_sync before
the timer was set up correctly, resulting in endless hilarity when
loading the driver.

Compared to Ben's patch (which moved around the setup_timer call to
sanitize_early) this moves the sanitize_early call around in the
driver load call. This way we avoid calling setup_timer again in the
resume code (where we also call sanitize_early).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76242
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 16:31:34 +01:00
Jani Nikula 0b99836f23 drm/i915/dp: use the new drm helpers for dp i2c-over-aux
The functionality remains largerly the same. The main difference is that
i2c-over-aux defer timeouts are increased to be safe for all use cases
instead of depending on DP device type and properties.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 15:05:48 +01:00
Jani Nikula 33ad6626a1 drm/i915/dp: move dp aux ch register init to aux init
Do a slight rearrangement of the switch to prep for follow-up.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 15:05:47 +01:00
Jani Nikula 9d1a1031e8 drm/i915/dp: use the new drm helpers for dp aux
Functionality remains largely the same as before.

Note that the retry loops and native reply handling all moved into the
core drm helper functions now.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Fix up the stray ; Rodrigo spotted in his review and add a
note to the commit message to answer Rodrigo's question in his review.]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 15:05:34 +01:00
Jani Nikula 884f19e948 drm/i915/dp: move edp vdd enable/disable at a lower level in i2c-over-aux
This is prep work for conversion to generic drm i2c-over-aux helpers
where we won't have the function to do this at.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 10:53:16 +01:00
Jani Nikula adddaaf488 drm/i915/dp: split edp_panel_vdd_on() for reuse
Introduce _edp_panel_vdd_on() that returns true if the call enabled vdd,
and a matching disable is needed. Keep edp_panel_vdd_on() as a helper
for when it is expected the vdd is off.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 10:53:15 +01:00
Jani Nikula 9dc4056026 drm/dp: let drivers specify the name of the I2C-over-AUX adapter
Let the drivers specify the name of the I2C-over-AUX adapter to maintain
backwards compatibility in the sysfs when converting to the new
I2C-over-AUX helper infrastructure.

The i915 driver currently uses DPDDC-A to DPDDC-D as names for the DP
i2c adapters. These names show up in the i2c sysfs name attribute. We'd
like to be able to maintain that when switching over to the new helpers.

Due to i2c device and connector cleanup ordering issues we also recently
made the drm device (instead of connector) the parent of the i2c
adapters:

commit 80f65de3c9
Author: Imre Deak <imre.deak@intel.com>
Date:   Tue Feb 11 17:12:49 2014 +0200

    drm/i915: dp: fix order of dp aux i2c device cleanup

With the name picked up from the adapter parent using dev_name(), it
would be the same for all i2c adapters with the current I2C-over-AUX
helpers.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 10:53:14 +01:00
Dave Airlie 5a08c07526 Merge branch 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel into drm-next
Merge straggling core drm patches.

* 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel:
  drm: Fix use-after-free in the shadow-attache exit code
  drm/fb-helper: Do the 'max_conn_count' zero check
  drm: Check if the allocation has succeeded before dereferencing newmode
  drm/fb-helper: Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par()
  drm/edid: request HDMI underscan by default
2014-03-18 19:23:22 +10:00
Joonyoung Shim 7550e3668c drm/cma: remove to make sg_table when gem cma is created
The sg_table made when gem cma is created isn't used anywhere. The sgt
of struct drm_gem_cma_object will have only sg_tabel imported.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-18 19:20:25 +10:00
Dave Airlie d1583c9997 Merge branch 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux into drm-next
This is the 3rd respin of the drm-anon patches. They allow module unloading, use
the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note
that there are minor conflicts with the "drm-minor" branch.

* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: init TTM dev_mapping in ttm_bo_device_init()
  drm: use anon-inode instead of relying on cdevs
  drm: add pseudo filesystem for shared inodes
2014-03-18 19:17:02 +10:00
Dave Airlie bcc298bc92 Linux 3.14-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTJlUvAAoJEHm+PkMAQRiGOhYH/1I+Bc7N7Rjr6QQAtBIy0GPC
 XMqSE/gpgxlvRneQbQsvTUlPnWRhgzLGendT9HFKawkaQ0UNuZdRVyBHGFmpuED8
 RlbicVVuuEZabrxEnCd7UPvYvEyK5pLIFpCRs5B+ManB1qLki2Ar03ymH1NRxOde
 edmPbSUFo2aONITrEBm7tqT3cShTmBaDGP/zU0TNDMNrpVVDbHZolSNu2z4xOTa5
 GqAOEbluLQ6jP3yxWur/V3Lk3W7pB6TabfX4o6UZu0F3iFnJxRMIzHXrI3o4yLTj
 HEwmB3npfc8DIUk4oik7RkN+aqxDcdg/rBLQD63+xxt6zCkP+0q16brC0R67qWE=
 =n9Ml
 -----END PGP SIGNATURE-----

Merge tag 'v3.14-rc7' into drm-next

Linux 3.14-rc7

Backmerge to help out Intel guys.
2014-03-18 19:12:31 +10:00
Dave Airlie 978c605016 Merge branch 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm into drm-next
Here's my drm documentation update and driver api polish pull request.
Alex reviewed the entire pile, I've applied a little bit of spelling
polish in a few places since then and otherwise the Usual Suspects (David,
Rob, ...) don't seem up to have another look at it (I've poked them on
irc). So I think it's as good as it gets ;-)

Note that I've dropped the final imx breaker patch since that's blocked on
imx getting sane. Once that's landed I'll ping you to pick up that
straggler.

* 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm: (34 commits)
  drm/imx: remove drm_mode_connector_detach_encoder harder
  drm: kerneldoc polish for drm_crtc.c
  drm: kerneldoc polish for drm_crtc_helper.c
  drm: drop error code for drm_helper_resume_force_mode
  drm/crtc-helper: remove LOCKING from kerneldoc
  drm: remove return value from drm_helper_mode_fill_fb_struct
  drm/doc: Fix misplaced </para>
  drm: remove drm_display_mode->private_size
  drm: polish function kerneldoc for drm_modes.[hc]
  drm/modes: drop maxPitch from drm_mode_validate_size
  drm/modes: drop return value from drm_display_mode_from_videomode
  drm/modes: remove drm_mode_height/width
  drm: extract drm_modes.h for drm_crtc.h functions
  drm: move drm_mode related functions into drm_modes.c
  drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
  drm/doc: Integrate drm_modes.c kerneldoc
  drm/kms: rip out drm_mode_connector_detach_encoder
  drm/doc: Add function reference documentation for drm_mm.c
  drm/doc: Overview documentation for drm_mm.c
  drm/mm: Remove MM_UNUSED_TARGET
  ...
2014-03-18 19:09:10 +10:00
Daniel Vetter e19b913714 Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next
Conflicts:
	drivers/gpu/drm/i915/Makefile

Makefile cleanup in drm-intel-next conflicts with a build-fix to move
intel_opregion under CONFIG_ACPI.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 09:43:56 +01:00
Daniel Vetter 27410e8248 drm: Fix use-after-free in the shadow-attache exit code
This regression has been introduced in

commit b3f2333de8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Dec 11 11:34:31 2013 +0100

    drm: restrict the device list for shadow attached drivers

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-18 13:09:03 +10:00
Dave Airlie 218212722f Merge tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Two 3.14 specific fixes, two cc: stable.

* tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Don't enable display error interrupts from the start
  drm/i915: Fix scanline counter fixup on BDW
  drm/i915: Add a workaround for HSW scanline counter weirdness
  drm/i915: Fix PSR programming
2014-03-18 13:06:17 +10:00
David Herrmann 7514409701 drm/gma500: remove stub .open/postclose
These are unused and can safely be dropped. DRM core verifies they're
non-NULL before it calls them.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-18 00:47:09 +01:00
Arthur Borsboom 9083eb381c drm/gma500: Code cleanup - inline documentation
Improve readability by adding/changing inline documentation

Signed-off-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:14:10 +01:00
Arthur Borsboom f90cd811ae drm/gma500: Code cleanup - style fixes
Code cleanup by following i915 constant/variable names and ordering
Code cleanup by following directions from kernel doc: Codingstyle
Code cleanup by following directions from kernel doc: DRM

Signed-off-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:14:08 +01:00
Arthur Borsboom af3765c764 drm/gma500: Code cleanup - removal of centralized exiting of function
Removed centralized exiting of function (goto statement), since it was
the only used in one single location with only a return statement.

Signed-off-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:14:06 +01:00
Patrik Jakobsson e85cbbf914 drm/gma500/cdv: Cedarview display cleanups
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:14:03 +01:00
Patrik Jakobsson 19519943ef drm/gma500: Unify encoder mode fixup
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:14:01 +01:00
Patrik Jakobsson f35257a3fe drm/gma500: Unify _get_core_freq for cdv and psb
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:13:24 +01:00
Patrik Jakobsson 778e26dee5 drm/gma500: Move asle interrupt work into a work task
Previously the backlight code was called from IRQ context which isn't
allowed. This patch moves all the asle work into a work task which takes
care of the locking bug reported by users.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64221
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:12:04 +01:00
Thierry Reding c7829b29e9 drm/gma500: Remove dead code
The gma500 driver sets DRIVER_GEM unconditionally, so testing for the
absence of the feature will always fail.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:12:02 +01:00
Patrik Jakobsson c269c6852b drm/gma500: Add backing type and base align to psb_gem_create()
We'll need this for our gem create ioctl in a later patch.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:59 +01:00
Patrik Jakobsson ae0b931881 drm/gma500: Remove unused ioctls
All of these ioctls are unused and most of them just duplicate what drm
already provides.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:57 +01:00
Patrik Jakobsson 8f3948729d drm/gma500: Always trap MMU page faults
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:55 +01:00
Patrik Jakobsson ae012bdc57 drm/gma500: Hook up the MMU
Properly init the MMU and add MMU entries when adding GTT entries

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:53 +01:00
Patrik Jakobsson 1c6b5d17d6 drm/gma500: Add first piece of blitter code
Right now, all we need to know about the blitter is that it's not doing
anything that can be messed up when fiddling with MMU mappings.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:51 +01:00
Patrik Jakobsson ac1b01b0ba drm/gma500: Give MMU code it's own header file
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:48 +01:00
Patrik Jakobsson 64a4aff283 drm/gma500: Add support for SGX interrupts
Add 2D blit status and MMU fault interrupts to the IRQ handler.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:38 +01:00
Patrik Jakobsson b219372dff drm/gma500: Make SGX MMU driver actually do something
Old MMU code never wrote PDs or PTEs to any registers. Now we do, and
that's a good start.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:04:01 +01:00
Daniel Vetter c94adc4a65 drm: Fix use-after-free in the shadow-attache exit code
This regression has been introduced in

commit b3f2333de8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Dec 11 11:34:31 2013 +0100

    drm: restrict the device list for shadow attached drivers

Reported-by: Dave Jones <davej@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-17 11:23:31 +01:00
Xiubo Li 04cfe97eb1 drm/fb-helper: Do the 'max_conn_count' zero check
Since we cannot make sure the 'max_conn_count' will always be none
zero from the users, and then if max_conn_count equals to zero, the
kcalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16).

So this patch fix this with just doing the 'max_conn_count' zero check
in the front of drm_fb_helper_init().

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-17 11:23:08 +01:00
Damien Lespiau 409bbf1e3d drm: Check if the allocation has succeeded before dereferencing newmode
We allocate memory in drm_display_mode_from_vic_index() and use it
without checking the pointer is valid. Fix that.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-17 11:23:07 +01:00
Ville Syrjälä 366d480700 drm/fb-helper: Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par()
Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() to
make sure extra planes get disabled whenever fbcon takes over.

Otherwise the code in drm_fb_helper_set_par() was already doing the
exact same thing as drm_fb_helper_restore_fbdev_mode(), so this doesn't
change the behaviour in any other way.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-17 11:23:07 +01:00
Dave Airlie e40d641099 Merge branch 'drm-minor' of git://people.freedesktop.org/~dvdhrm/linux into drm-next
This series contains several cleanups for the DRM-minor handling. All but the
last one reviewed by Daniel and tested by Thierry. Initially, the series
included patches to convert minor-handling to a common base-ID, but have
been NACKed by Daniel so I dropped them and only included the main part in the
last patch. With this in place, drm_global_mutex is no longer needed for
minor-handling (but still for device unregistration..).
There are some pending patches that try to remove the global mutex entirely, but
they need some more reviews and thus are not included.
* 'drm-minor' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: make minors independent of global lock
  drm: inline drm_minor_get_id()
  drm: coding-style fixes in minor handling
  drm: remove redundant minor->device field
  drm: remove unneeded #ifdef CONFIG_DEBUGFS
  drm: rename drm_unplug/get_minor() to drm_minor_register/unregister()
  drm: move drm_put_minor() to drm_minor_free()
  drm: allocate minors early
  drm: add minor-lookup/release helpers
  drm: provide device-refcount
  drm: turn DRM_MINOR_* into enum
  drm: remove unused DRM_MINOR_UNASSIGNED
  drm: skip redundant minor-lookup in open path
  drm: group dev-lifetime related members
2014-03-17 12:29:29 +10:00
David Herrmann 07b48c3ac5 Merge branch 'drm-minor' into drm-next
Fix minor conflicts with drm-anon:
 - allocation/free order
 - drm_device header cleanups
2014-03-16 13:13:51 +01:00
David Herrmann afab4463ac Merge branch 'drm-anon' into drm-next 2014-03-16 13:04:11 +01:00
David Herrmann 0d639883ee drm: make minors independent of global lock
We used to protect minor-lookup and setup by the global drm lock. To
continue our attempts of dropping drm_global_mutex, this patch makes the
minor management independent of it. Furthermore, we make it all atomic and
switch to spin-locks instead of a mutex.

Now that minor-lookup is independent, we also move the
"drm_is_unplugged()" test into the minor-lookup path. There is no reason
to ever return a minor for unplugged objects, so keep that logic internal.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16 12:54:21 +01:00
David Herrmann 7d86cf1a4f drm: inline drm_minor_get_id()
We can significantly simplify this helper by using plain multiplication.
Note that we converted the minor-type to an enum earlier so this didn't
work before.

We also fix a minor range-bug here: the limit argument of idr_alloc() is
*exclusive*, not inclusive, so we should use 64 instead of 63 as offset.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16 12:25:19 +01:00