After reading a nice article on LWN[1], I went back and double checked
my handling of invalid-input checking. Turns out there were a couple
places I had missed.
Since the driver is fairly young, and the devices it supports are really
only just barely usable for basic stuff (serial console) with an
upstream kernel, I think we should fix this now and revert specific
parts of this patch later in the unlikely event that a regression is
reported.
[1] https://lwn.net/Articles/588444/
Signed-off-by: Rob Clark <robdclark@gmail.com>
Some of the w/a or different behavior of userspace blob driver seem to
be keyed to gpu patch revision, rather than gpu-id. So expose the full
chip-id to userspace so it can DTRT.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Shut down the clks when the gpu has nothing to do. A short inactivity
timer is used to provide a low pass filter for power transitions.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove the rest of the references to drm_i915_private_t. No functional
changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Drop hunk in i915_cmd_parser.c]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also drop any unnecessary casts. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also drop any unnecessary casts. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The speculation is that we can conserve more power by masking off
the interrupts at source (PMINTRMSK) rather than filtering them by the
up/down thresholds (RPINTLIM). We can select which events we know will
be active based on the current frequency versus our imposed range, i.e.
if at minimum, we know we will not want to generate any more
down-interrupts and vice versa.
v2: We only need the TIMEOUT when above min frequency.
v3: Tweak VLV at the same time
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Reviewed-by:Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
What used to be a short-circuit now needs to adjust interrupt masking in
response to user requests for changing the min/max allowed frequencies.
This is currently done by a special case and early return, but the next
patch adds another common action to take, so refactor the code to reduce
duplication.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by:Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 2754436913.
Conflicts:
drivers/gpu/drm/i915/i915_irq.c
The partial application of interrupt masking without regard to other
pathways for adjusting the RPS frequency results in completely disabling
the PM interrupts. This leads to excessive power consumption as the GPU
is kept at max clocks (until the failsafe mechanism fires of explicitly
downclocking the GPU when all requests are idle). Or equally as bad for
the UX, the GPU is kept at minimum clocks and prevented from upclocking
in response to a requirement for more power.
Testcase: pm_rps/blocking
Cc: Deepak S <deepak.s@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by:Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If vsyncshift comes out as negative, add one htotal to it to get the
corresponding positive value.
This is rather theoretical as it would require a mode where the
hsync+back porch is very long and the active+front porch very short.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
PIPECONF_INTERLACE_W_FIELD_INDICATION is only meant to be used for sdvo
since it implies a slightly weird vsync shift of htotal/2. For everything
else we should use PIPECONF_INTERLACE_W_SYNC_SHIFT and let the value in
the VSYNCSHIFT register take effect.
The only exception is gen3 simply because VSYNCSHIFT didn't exist yet.
Gen2 doesn't support interlaced modes at all, so we can drop the
explicit gen2 checks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When interlaced sdvo output is used, vsyncshift should supposedly
be (htotal-1)/2. In reality PIPECONF/TRANSCONF will override it by
using the legacy vsyncshift interlace mode which causes the hardware
to ignore the VSYNCSHIFT register.
The only odd thing here is that on PCH platforms we program the
VSYNCSHIFT on both CPU and PCH, and it's not entirely clear if both
sides have to agree on the value or not. On the CPU side there's no
way to override the value via PIPECONF anymore, so if we want to make
the CPU side agree with the PCH side, we should probably program the
approriate value into VSYNCSHIFT manually. So let's do that, but for
now leave the PCH side to still use the legacy interlace mode in
TRANSCONF.
We can also drop the gen2 check since gen2 doesn't support interlaced
modes at all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This makes HDMI testers happier on VLV platforms. It may be that we
need it for any non-SVO platform, but I don't have any tests to back
that up, so I'm leaving other pre-ILK platforms alone for now.
Tested-by: "Clint Taylor <clinton.a.taylor@intel.com>"
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74964
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want future generations to at least attempt to use all features, so
restrict the stolen memory disabling when vt-d is enabled to the
latest generation we have reports for. Which is a HSW per the original
report.
Also once we get a bit a hold of some of the mysterious framebuffer in
stolen memory issues that still haunt bugzilla, we should probably
drop this hack again and see what happens.
This was introduced in
commit 0f4706d274
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Mar 18 14:50:50 2014 +0200
drm/i915: Disable stolen memory when DMAR is active
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
References: https://bugs.freedesktop.org/show_bug.cgi?id=68535
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTOOOnAAoJEHm+PkMAQRiGsBAH/2PAOL3TbOG6tEedxQrTwsr2
muRIRTVWawjT8/npbHupxGnAyAVdmdffBHpmCmcftKdKNryT3YZW8/JWoYc+WSlo
3vTDJHDOYAe6yCBjjhYwcu150THBQdOymOi5mbbclo0XWYG18jd3+abYprRH6SiD
XqNSzYqoiv91JHBAWKBIpo1cyRDuwoM7+jZ7gX41r2800EL7loY3e08cPDDNU6HA
CKaLXMwLwYTefE+Wnr+4UUr08NbNBbBUKLUSXVqKKIpd+MtbyhV1SnWzz8VQSkag
K/uzsnGnE7nrqoepMSx3nXxzOWxUSY2EMbwhEjaKK4xBq9C9pzv3sG/o2/IyopU=
=Nuom
-----END PGP SIGNATURE-----
Merge tag 'v3.14' into drm-intel-next-queued
Linux 3.14
The vt-d w/a merged late in 3.14-rc needs a bit of fine-tuning, hence
backmerge.
Conflicts:
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_dp.c
All trivial adjacent lines changed type conflicts, so trivial git
doesn't even show them in the merg commit.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is *not* bisected, but the likely regression is
commit c35614380d
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Tue Nov 24 09:48:48 2009 +0800
drm/i915: Don't set up the TV port if it isn't in the BIOS table.
The commit does not check for all TV device types that might be present
in the VBT, disabling TV out for the missing ones. Add composite
S-video.
Reported-and-tested-by: Matthew Khouzam <matthew.khouzam@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73362
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Broadwell introduces large address spaces, greater than 32bits in width.
These require that we then store and print 64bit values. If we were to
zero pad them out to 16 hexadecimal places, we have to carefully count
the leading zeroes - which is easy to make a mistake. Conversely, if we
do not zero pad out to 16, but keep it padding to 8 hexadecimal places,
it is very easy to miss an address that is actually larger than 4GiB. A
suggested compromise is to insert a space between the upper and lower
dwords of the address so that we can continue with our accustom 32bit
parser. (Alternatively, we could do the equivalent in our userspace
decoder.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As Broadwell has an increased virtual address size, it requires more
than 32 bits to store offsets into its address space. This includes the
debug registers to track the current HEAD of the individual rings, which
may be anywhere within the per-process address spaces. In order to find
the full location, we need to read the high bits from a second register.
We then also need to expand our storage to keep track of the larger
address.
v2: Carefully read the two registers to catch wraparound between
the reads.
v3: Use a WARN_ON rather than loop indefinitely on an unstable
register read.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Drop spurious hunk which conflicted.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Not implementing this W/A can lead to hangs.
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rafael Barbalho <rafael.barbalho@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It apparently blows up on some machines. This functionally reverts
commit 828c79087c
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Wed Oct 16 09:21:30 2013 -0700
drm/i915: Disable GGTT PTEs on GEN6+ suspend
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841
Reported-and-Tested-by: Brad Jackson <bjackson0971@gmail.com>
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the cursor width is changed, we may need to recompute our WM to
prevent untold flickering. We hope that the registers are flushed on the
same vblank to prevent underruns...
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we can use different cursor size, we can not hardcode 64 pixels
as the cursor width anymore.
v2: Apply to 965gm/g4x paths as well
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch Removes the VS_TIMER_DISPATCH bit enable in MI MODE reg for
platforms > Gen6.
VS_TIMER_DISPATCH bit enable was earlier required as a part of
WA 'WaTimedSingleVertexDispatch', which is now applicable only to
platforms < Gen7.
v2: Enhancing the scope of the patch to full Gen7 (Chris)
v3: Modifying the WA condition to the cover the applicable platforms,
and adding the WA name in comments. (Ville)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Sourab Gupta <sourab.gupta@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # ivb, hsw -Chris
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we use different rps events for different platforms or due to wa,
we might end up needing this logic in a lot of places. Instead of
this let's use a variable in dev_priv to track the enabled PM
interrupts.
v2: Initialize pm_rps_events in intel_irq_init() (Ville).
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Frob the commit message a bit since the English was a bit too
garbled ;-) ]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since
commit 5c673b60a9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Mar 7 20:34:46 2014 +0100
drm/i915: Don't enable display error interrupts from the start
we don't enable underrun interrupts any more at takeover time.
Unfortunately I've forgotten to also adjust the sw-side tracking.
Since the code assumes that disabled pipes have underrun reporting
enabled set the disable flag only on all pipes which are active at
takeover time. Without this underrun reporting wasn't enabled
correctly on the first modeset. Note that for fastboot this is another
piece of state that needs to be fixed up by enabling the underrung
reporting after watermarks have beend fixed up.
On ivb/hsw an additional effect of this regression was that also all
cpu crc reporting stopped working since the master error interrupt it
shared across all pipes and sources.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76150
[danvet: Augment the code comment and polish the commit message a bit,
as discussed with Jani.]
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: lu hua <huax.lu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's an entire pile of issues in here:
- Use the main RING_HEAD register, not ACTHD. ACTHD points at the gtt
offset of the batch buffer when a batch is executed. Semaphores are
always emitted to the main ring, so we always want to look at that.
- Mask the obtained HEAD pointer with the actual ring size, which is
much smaller. Together with the above issue this resulted us in
trying to dereference a pointer way outside of the ring mmio
mapping. The resulting invalid access in interrupt context
(hangcheck is executed from timers) lead to a full blown kernel
panic. The fbcon panic handler then tried to frob our driver harder,
resulting in a full machine hang at least on my snb here where I've
stumbled over this.
- Handle ring wrapping correctly and be a bit more explicit about how
many dwords we're scanning. We probably should also scan more than
just 4 ...
- Space out some of teh computations for readability.
This reduces hard-hangs on my snb here. Mika and QA both say that it
doesn't completel remove them, but at least for me it's a clear
improvement in stability.
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
References: https://bugs.freedesktop.org/show_bug.cgi?id=74100
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the recent addition of locking checks in
commit 62ff94a549
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100
drm/crtc-helper: remove LOCKING from kerneldoc
drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.
Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.
Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signal availability of prime fd reference ioctls and render nodes.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Make sure only buffer objects that are referenced by the client can be mapped.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
A function to be used to check whether a caller has put a ref object
(opened) a struct ttm_base_object
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
If using legacy (non-prime) surface sharing, only allow surfaces
to be shared between clients with the same master. This will block
malicious clients from peeking at contents at surfaces from other
(possibly vt-switched) masters.
v2:
s/legacy_client/primary_client/
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Allow prime fds and at the same time block legacy handles for render-nodes
in the surface reference ioctls. This means these ioctls can be used
directly from prime-aware clients, and that they can be called from
render-nodes.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
These ioctls will anyway only succeed if the client previously opened
referenced the object. Furthermore, closing the client would implicitly
execute the same action. This prevents clients from blocking on UNREF if
their master dropped, and will allow masters to UNREF after dropping
master privileges.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The following restrictions affect clients connecting using legacy nodes:
*) Masters that have dropped master privilieges are not considered
authenticated until they regain master privileges.
*) Clients whose master have dropped master privileges block interruptibly on
ioctls requiring authentication until their master regains master
privileges. If their master exits, they are killed.
This is primarily designed to prevent clients authenticated with one master to
access data from clients authenticated with another master.
(Think fast user-switching or data sniffers enabled while X is vt-switched).
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Don't use a per-master semaphore (ttm lock) for reservation protection, but
rather a per-device semaphore. This is needed since clients connecting using
render nodes aren't master aware.
The ttm lock used should probably be replaced with a reader-write semaphore
once the function down_xx_interruptible() is available.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The master management was previously protected by the drm_device::struct_mutex.
In order to avoid locking order violations in a reworked dropped master
security check in the vmwgfx driver, break it out into a separate master_mutex.
Locking order is master_mutex -> struct_mutex.
Also remove drm_master::blocked since it's not used.
v2: Add an inline comment about what drm_device::master_mutex is protecting.
v3: Remove unneeded struct_mutex locks. Fix error returns in
drm_setmaster_ioctl().
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Add a drm_is_legacy() helper, constify argument to drm_is_render_client(),
and use / change helpers where appropriate.
v2: s/drm_is_legacy/drm_is_legacy_client/ and adapt to new code context.
v3: s/legacy_client/primary_client/
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Like for render-nodes, there is no point in maintaining the master concept
for control nodes, so set the struct drm_file::master pointer to NULL.
At the same time, make sure DRM_MASTER | DRM_CONTROL_ALLOW ioctls are always
allowed when called through the control node. Previously the caller also
needed to be master.
v2: Adapt to refactoring of ioctl permission check.
v3: Formatting of logical expression. Use drm_is_control_client() instead of
drm_is_control().
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Helps reviewing and understanding these checks.
v2: Remove misplaced newlines.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
control- and render nodes are intended to be master-less.
v2: Replace tests for !legacy with tests for !mode_group for readability.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c: In function ‘i915_parse_cmds’:
/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c:405:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 has type ‘int’ [-Wformat=]
DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X length=%d batchlen=%ld\n",
^
Signed-off-by: Dave Airlie <airlied@redhat.com>
Right now a debug message looks like:
[drm:drm_ioctl], pid=860, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC
That first comma looks weird as we already have ']' as a separator.
Remove it.
If anyone sees this commit message and also thinks that auth=1 isn't the
most useful info to have here, let's just say I'd happily review a patch
removing it. If I don't get annoyed enough to submit a patch, that is.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is always DRM_NAME, so we can just make it part of the format
string instead of asking prink to do it for us.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The DRM_LOG* macros where the only sites where drm_ut_debug_printk was
called with NULL arguments for prefix and function_name. Now that they
are gone, we can remove that case.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In the logging code, we are currently checking is we need to output in
drm_ut_debug_printk(). This is too late. The problem is that when we write
something like:
DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
connector->base.id,
drm_get_connector_name(connector),
connector->encoder->base.id,
drm_get_encoder_name(connector->encoder));
We start by evaluating the arguments (so call drm_get_connector_name() and
drm_get_connector_name()) before ending up in drm_ut_debug_printk() which will
then does nothing.
This means we execute a lot of instructions (drm_get_connector_name(), in turn,
calls snprintf() for example) to happily discard them in the normal case,
drm.debug=0.
So, let's put the test on drm_debug earlier, in the macros themselves.
Sprinkle an unlikely() as well for good measure.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It apparently blows up on some machines. This functionally reverts
commit 828c79087c
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Wed Oct 16 09:21:30 2013 -0700
drm/i915: Disable GGTT PTEs on GEN6+ suspend
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841
Reported-and-Tested-by: Brad Jackson <bjackson0971@gmail.com>
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Same fix as for nouveau, when we fail with EINVAL, subsequent
gets fail hard, causing the device not to open.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
If we were on a non-optimus device, we'd return -EINVAL, this would
lead to the over engineered runtime pm system to go into an error
state, subsequent get_sync's would fail, so we'd never be able
to open the device again.
(like really get_sync shouldn't fail if the device isn't powered
down).
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
this stops the device from being deleted before all the dma-bufs
on it are freed, this fixes an oops when you unplug a udl device while
it has imported a buffer from another device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The recently added PTN3460 device driver uses interfaces that
are provided by the KMS helper infrastructure, so we should
explicitly select that to avoid this linker error:
ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!
ERROR: "drm_helper_connector_dpms" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!
We have to drop the I2C dependency to avoid a circular dependency
chain, but that's ok because DRM already selects I2C.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- first stage of (ongoing) gpu fault recovery work
- initial support for maxwell (binary driver fw needed)
- various random fixes across the board
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits)
drm/nouveau: fix missing newline
drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses
drm/nouveau/therm: let the vbios decide on the automatic fan management mode
drm/nvd7/therm: handle another kind of PWM fans
drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
drm/nouveau: fix small thinko in vblank timestamping.
drm/nouveau/therm: check for sensor presence with requested mode, not current
drm/nouveau/disp/dp: allow 540MHz data rate
drm/nouveau: recognise higher link rate for available dp bw calculations
drm/nouveau/disp: limit dp capabilities as per dcb
drm/nva3/fbram: restrict training pattern setup to GT218
drm/nva3/devinit: restrict script access to some PFB regs
drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok
drm/nouveau/bios: have strap reads show on devinit spam debug level
drm/nv50/gpio: fixup reset for gpios >= 16
drm/nv50/gpio: exclude sense value from mask when changing registers
drm/gk104/gr: therm magic needed on some kepler boards
drm/gm107/gr: initial support
drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx
drm/nouveau/bios: parsing of some random table needed to bring up gr
...
Add a missing newline at the end of a DRM_INFO message.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Other kind of accesses are unreliable on Kepler cards. As advised by NVIDIA,
let's only use 32-bit accesses to fetch the vbios from PROM.
This fixes vbios fetching on my nve7 which failed in certain specific
conditions.
I suggest we Cc stable, for all kernels they still maintain after the big
rewrite.
Suggested-by: Christian Zander <czander@nvidia.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This should fix automatic fan management on fermi cards who do not have
0x46 entries in the thermal table.
On my nve6, the blob sets the default linear range from 40°C to 100°C
but my nvcf's default values are 40°C to 85°C. Let's keep 85 as a default
for everyone.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This should fix fan management on many nvd7+ chipsets.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Timothée Ravier <tim@siosm.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This should fix a deadlock that has been reported to us where fan_update()
would hold the fan lock and try to grab the alarm_program_lock to reschedule
an update. On an other CPU, the alarm_program_lock would have been taken
before calling fan_update(), leading to a deadlock.
We should Cc: <stable@vger.kernel.org> # 3.9+
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Timothée Ravier <tim@siosm.fr>
Tested-by: Boris Fersing (IRC nick fersingb, no public email address)
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
*hpos horizontal scanout position doesn't need to be corrected
to count the pixels between hactive end and htotal negative.
That is only needed for *vpos to count lines until end of
vblank for the vblank timestamping.
Use hpos as is without correction.
Removes occassional spikes in timestamps of up to 1 scanline
duration, thereby improves accuracy to about +/- 2 usecs instead
of +/- 12 usecs, wrt. true onset time as measured with high
precision equipment on NV-A5.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not needed everywhere, and potentially not safe to do depending on how
the rest of PTHERM is configured...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This does *not* (and is not intended to) fix the issue reported by
Christoph Rudorff on the nouveau mailinglist.
The patch proposed (which is similar to this one, but also reorders
whether we disable accel or call fb_set_suspend first), papers over
another problem entirely by avoiding touching the framebuffer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Prevents an attempt to access VRAM on an un-posted board, which, on a
particular system with a GRID K1 installed, causes a MCE and chokes
the entire system.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming mobile Kepler GPUs (such as GK20A) use the platform bus instead
of PCI to which Nouveau is tightly dependent. This patch allows Nouveau
to handle platform devices by:
- abstracting PCI-dependent functions that were typically used for
resource querying and page mapping,
- introducing a nv_device_is_pci() function that allows to make
PCI-dependent code conditional,
- providing a nouveau_drm_platform_probe() function that takes a GPU
platform device to be probed.
Core code as well as engine/subdev drivers are updated wherever possible
to make use of these functions. Some older drivers are too dependent on
PCI to be properly updated, but all newer code on which future chips may
depend should at least be runnable with platform devices.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
My test cases don't seem to trigger this on all Fermi boards, not sure
if they're broken tests or it didn't work until later versions.
GF119 definitely works.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lists of known methods for the DMA channel classes, and mappings to
their priv register addresses (where known).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Having a \n in the middle of a format string means that the next line
doesn't get the prefixes unlike every other line printed by the trace.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It's really confusing for NV_DEBUG's printing to be controlled via
drm.debug while everything else is controlled via nouveau.debug. These
messages can be turned on with nouveau.debug=DRM=debug.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The hdmi device is required for runtime pm. However it is not available
on many esp older devices, which were all seeing these error messages.
Take this opportunity to also convert to nv_debug instead of the DRM_*
messages, like the rest of nouveau does.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Memory was always allocated for 4096 channels. Change this to allocate
what we actually need according to the number of channels we use.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
pm_runtime_get*() may return -EACCES to indicate a device does not have
runtime PM enabled. This is currently the case with platform devices
on Nouveau, and is not an error in that context. Handle this case
without failure.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
abi16->handles is a u64, so make sure to use 1ULL << val when modifying.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The ffsll function is a lot slower than the __ffs64 built-in which
compiles to a single instruction on 64-bit. It's also nice to avoid
custom versions of standard functions. Note that __ffs == ffs - 1.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The usage of strict_strtol() is not preferred, because
strict_strtol() is obsolete. Thus, kstrtol() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This fixes fast color clear with 1D-tiled single-sample surfaces
and Hyper-Z corruption with 1D-tiled depth surfaces.
Even though it seems it is not needed for 1D tiling, CMASK and HTILE are
always 2D-tiled, thus the hw needs to know the actual pipe configuration
for CMASK and HTILE addressing no matter what the tiling mode of the surface
is.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Replace the radeon specific version with the generic version.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Switch to the new dp helpers. The main difference is
that the DP helpers don't allow an adjustable delay in
the aux transaction, but I don't know that this is
necessary.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Switch to debug only to avoid flooding the logs.
This mirrors the behavior in some other drivers.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
We need a special packet for the start and end of the
transaction.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
This more closely matches what the vbios does and also
adds a quirk for travis lvds displays and powers down
the sink on DP displays which saves some power and may
fix display issues in some cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Highlights
----------
Re-factoring works over the exynos drm framework.
- drm_crtc, drm_encoder/drm_connector are implemented by sub drivers
directly.
- Removing pm interfaces from each sub driver, and implementing them
at top level of exynos drm.
Add DisplayPort Transmitter driver.
- Just moving existing driver from drivers/vides/exynos into
drivers/gpu/drm/exynos.
Add new LVDS bridge driver, PTN3460.
- Placed in drivers/gpu/drm/bridge, and this device is used to transfer
image signal from DP(DisplayPort) to LVDS Panel.
So this driver will be used with DP driver moved into exynos drm.
Add parallel panel support
- With the re-factoring patch series, existing parallel panel support was
broken by moving exynos_drm_display ops into each real connector driver,
DP. So this patch series adds a new parallel panel module,
exynos_drm_dpi, for supporting parallel panel, and also adds relevant
bindings.
Some fixups and cleanups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (45 commits)
drm/exynos: fimd: remove unused variable
ARM: dts: exynos4210-universal: add exynos/fimd node
drm/exynos: restore parallel output interface support
exynos/fimd: add parallel output related bindings
drm/exynos: correct timing porch conversion
drm/exynos: init kms poll after creation of connectors
drm/exynos: delay fbdev initialization until an output is connected
drm/exynos: fix unnecessary resource cleanup
drm/exynos: hdmi: use i2c_adapter instead of i2c_client
drm/exynos: hdmi: consider APB PHY
drm/exynos: Remove the exynos_drm_connector shim
drm/exynos: Implement lvds bridge discovery to DP driver
drm/bridge: Add PTN3460 bridge driver
drm/exynos: Implement drm_connector directly in vidi driver
drm/exynos: Implement drm_connector directly in dp driver
drm/exynos: Implement drm_connector in hdmi directly
drm/exynos: Add create_connector callback
drm/exynos: Consolidate suspend/resume in drm_drv
drm/exynos: Clean up FIMD power on/off routines
drm/exynos: Implement dpms display callback in DP
...
With the recent addition of locking checks in
commit 62ff94a549
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100
drm/crtc-helper: remove LOCKING from kerneldoc
drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.
Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.
Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With the recent addition of locking checks in
commit 62ff94a549
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100
drm/crtc-helper: remove LOCKING from kerneldoc
drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.
Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.
Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The patch removes unused vidcon0 field from fimd_context structure.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch adds parallel output interface to FIMD device driver.
It also restores support for panels initialized by boot loader,
but without proper kernel driver.
Driver uses video interface bindings to find connected panel.
It uses drm_panel interface to interact with the panel.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch corrects porch calculation. It should
be calculated as a difference between adjacent
respective fields of drm_display_mode.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
KMS poll init helper should be run when connectors are created,
otherwise it will not schedule connection detector.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In case fbdev is initialized before any output is connected,
fb resolution defaults to 1024x768. After that any output with
bigger resolution is ignored and fbdev is not displayed.
The patch postpones fbdev initialization to avoid such situation.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch changes i2c_client for ddc to i2c_adapter
because ddc needs only i2c_adapter.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch returns error in case of using APB PHY.
Exynos5420 SoC and maybe later would use APB PHY instead of
I2C PHY so such case should be considered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This path removes the exynos_drm_connector code since it was just
passing hooks through display_ops. The individual device drivers are now
responsible for implementing drm_connector directly.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch implements the lvds bridge discovery and connector pre-emption
code to the dp driver.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS
bridge chip.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch implements drm_connector directly in the vidi
driver, this will allow us to move away from the exynos_drm_connector
layer.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch implements drm_connector directly in the dp driver, this will
allow us to move away from the exynos_drm_connector layer.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch implements drm_connector in the hdmi driver directly, instead
of using exynos_drm_connector.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This creates a new display hook called create_connector. The purpose is
to allow the display driver to create its own drm_connector instead of
using the exynos_drm_connector. This moves things closer to completely
removing the exynos_drm_connector abstraction.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes all of the suspend/resume logic from the individual
drivers and consolidates it in drm_drv. This consolidation reduces the
number of functions which enable/disable the hardware to just one -- the
dpms callback. This ensures that we always power up/down in a consistent
manner.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch separates the fimd_activate function into poweron/poweroff
functions to be more consistent with the other drivers in exynos drm. It
also properly cleans up after failures in poweron. The functions have
also been shuffled around such that they are all in the same
spot in the file and poweron/poweroff can be called from the dpms function.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch implements the dpms display callback for the DP driver.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch moves the exynos_drm_display implementation from fimd into
the dp driver. This will allow for tighter integration of the dp driver
into the exynos drm driver.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch moves the code from video/ to drm/. This is required the DP
driver needs to power on/off in the correct order in relation to fimd.
This will also allow the DP driver to participate in drm modeset as well
as provide accurate connection detection and edid.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes a few fimd_context members which are either entirely
unused or unneeded.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch uses the mode passed into mode_set to configure fimd instead
of directly using the panel from context. This will allow us to move
the exynos_drm_display implementation out of fimd, where it doesn't
belong.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds a new manager callback for mode_fixup and pipes it
through exynos_drm_crtc. This will allow the manager drivers to
alter the mode during modeset.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds a mode_set callback to the manager operations which
sets the crtc's current mode to the manager driver. This will allow the
fimd driver to set its mode using values from drm, instead of the dt.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch moves the code which disables unused crtc planes from the
encoder to the crtc. Since there is a 1:1 encoder/crtc mapping in
exynos, the only valid crtc change the pre-existing code could catch is
disconnecting an active crtc from the encoder. Thus it is functionally
equivalent to just disable all planes attached to a crtc when the crtc
is disabled.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch changes the manual copying of mode to adjusted_mode in
mode_fixup to use drm_mode_copy instead of handling things manually.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch trims exynos_drm_hdmi out of the driver. The reason it
existed in the first place was to make up for the mixture of
display/overlay/manager ops being spread across hdmi and mixer. With
that code now rationalized, mixer and hdmi map directly to
exynos_drm_crtc and exynos_drm_encoder, respectively. Since there is a
1:1 mapping, we no longer need this layer.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The i2c client was previously being passed into the hdmi driver via a
dedicated i2c driver, and then a global variable. This patch removes all
of that and just uses the device tree to get the i2c_client. This patch
also properly references the client so we don't lose it before we're
done with it.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
[seanpaul changed to phandle lookup instead of using of node name]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch splits display and manager from subdrv. The result is that
crtc functions can directly call into manager callbacks and encoder
functions can directly call into display callbacks. This will allow
us to remove the exynos_drm_hdmi shim and support mixer/hdmi & fimd/dp
with common code.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Change all instances of possible_crtcs in the exynos drm driver to be
unsigned long. This matches the type used in the drm layer.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes the dpms state tracking in encoder. This
state is at best confusing and at worst incorrect since the display
drivers can turn on and off without propagating the value.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch renames the display_op power_on to dpms to accurately reflect
what the function does.
The side-effect of this patch is that the new hdmi dpms callback is now
invoked twice in the dpms path. This is safe and will be dealt with when
the exynos_drm shim goes away.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes the call from encoder dpms into connector dpms (which
will then call back into encoder dpms through the helper function). The
callback is likely to keep connector->dpms in the right state when
initiating dpms from crtc or encoder, but this isn't the right way to do
it. This patch is the first step towards rationalizing power management
in the exynos drm driver.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes the apply() manager callback in favor of putting the
relevant commits in the individual drivers. This will mitigate some of
the difference between the suspend/resume path and the dpms path
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch changes the manager ops callbacks from accepting the subdrv
device pointer to taking a pointer to the manager. This will allow us
to move closer to decoupling manager/display from subdrv, and subsequently
decoupling the crtc/plane from the encoder.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rob Clark