Commit Graph

3395 Commits

Author SHA1 Message Date
Mans Rullgard cd12ff0b5a ata: sata_dwc_460ex: remove empty libata callback
The sata_dwc_qc_prep() does nothing.  Use the default ata_noop_qc_prep
instead.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:20 -04:00
Andy Shevchenko 4bb41be5ea ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
Here we refactor HOSTDEV{P}_FROM_*() macros to fit one line and fix the
definition of HSDEV_FROM_HSDEVP() where wrong name of the parameter waas used.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:19 -04:00
Mans Rullgard 2d20da00c3 ata: sata_dwc_460ex: get rid of global data
This moves all global data into the driver private struct, thus
permitting multiple devices of this type to be used.

The core_scr_read/write() functions are replaced with equivalent
calls to the existing sata_dwc_scr_read/write().

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:19 -04:00
Mans Rullgard 0f48debdb9 ata: sata_dwc_460ex: add phy support
This adds support for powering on an optional PHY when activating the
device.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:19 -04:00
Mans Rullgard 50b433753d ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
Currently this driver only works with a DesignWare DMA engine which it
registers manually using the second "reg" address range and interrupt
number from the DT node.

This patch makes the driver instead use the "dmas" property if present,
otherwise optionally falling back on the old way so existing device
trees can continue to work.

With this change, there is no longer any reason to depend on the 460EX
machine type so drop that from Kconfig.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:19 -04:00
Andy Shevchenko 077028ecc9 ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
ata_sff_qc_issue() can't handle DMA commands and thus we have to avoid it for
them. Do call ata_bmdma_qc_issue() instead for this case. Note that the former
one distinguishes PIO and DMA mode and behaves accordingly.

Suggested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:19 -04:00
Mans Rullgard ae4c3485fa ata: sata_dwc_460ex: skip dma setup for non-dma commands
Calling dmaengine_prep_slave_sg() for non-dma ATA commands is
unnecessary at best and could be harmful if the dma driver reacts
badly to this.  It also causes this driver to print a bogus error
message in these cases.

This patch changes sata_dwc_qc_issue() to only do the dma setup
for dma commands and also reports an error to libata if if fails.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:18 -04:00
Andy Shevchenko e1c1bee34f ata: sata_dwc_460ex: select only core part of DMA driver
There is no need to have a platform driver compiled since the DMA driver is
used as a library.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:18 -04:00
Andy Shevchenko 59a75cef9d ata: sata_dwc_460ex: DMA is always a flow controller
In the original code the DMA is always a flow controller. Set this accordingly
in updated code.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:18 -04:00
Andy Shevchenko 4ea8c205e5 ata: sata_dwc_460ex: burst size must be in items not bytes
The burst size as defined by DMAengine API is in items of address width. Derive
burst size from AHB_DMA_BRST_DFLT (64 bytes) by dividing it to
DMA_SLAVE_BUSWIDTH_4_BYTES (4 bytes) that gives us 16 items.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:18 -04:00
Andy Shevchenko 6689dfac00 ata: sata_dwc_460ex: set dma_boundary to 0x1fff
The original code states:

	Make sure a LLI block is not created that will span 8K max FIS
	boundary. If the block spans such a FIS boundary, there is a chance
	that a DMA burst will cross that boundary -- this results in an error
	in the host controller.

Since we have switched to generic DMAengine API we satisfy above by setting
dma_boundary value to 0x1fff.

Suggested-by: Mans Rullgard <mans@mansr.com>
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:18 -04:00
Christian Lamparter a7e6de544c ata: sata_dwc_460ex: fix crash on offline links without an attached drive
This patch fixes Machine Check "Data Write PLB Error" which happens
when libata-sff's ata_sff_dev_select is trying to write into the
device_addr in order to select a drive. However, SATA has no master
or slave devices like the old ATA Bus, therefore selecting a
different drive is kind of pointless.

Data Write PLB Error
Oops: Machine check, sig: 7 [#1]
PowerPC 44x Platform
Modules linked in:
CPU: 0 PID: 508 Comm: scsi_eh_0 Not tainted 4.6.0-rc3-next-20160412+ #10
[...]
NIP [c027e820] ata_sff_dev_select+0x3c/0x44
LR [c027e810] ata_sff_dev_select+0x2c/0x44
Call Trace:
[cec31cd0] [c027da00] ata_sff_postreset+0x40/0xb4 (unreliable)
[cec31ce0] [c027a03c] ata_eh_reset+0x5cc/0x928
[cec31d60] [c027a840] ata_eh_recover+0x330/0x10bc
[cec31df0] [c027bae0] ata_do_eh+0x4c/0xa4
[...]

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:18 -04:00
Mans Rullgard 55e610cdd2 ata: sata_dwc_460ex: remove incorrect locking
This lock is already taken in ata_scsi_queuecmd() a few levels up the
call stack so attempting to take it here is an error.  Moreover, it is
pointless in the first place since it only protects a single, atomic
assignment.

Enabling lock debugging gives the following output:

=============================================
[ INFO: possible recursive locking detected ]
4.4.0-rc5+ #189 Not tainted
---------------------------------------------
kworker/u2:3/37 is trying to acquire lock:
 (&(&host->lock)->rlock){-.-...}, at: [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c

but task is already holding lock:
 (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&host->lock)->rlock);
  lock(&(&host->lock)->rlock);

 *** DEADLOCK ***
 May be due to missing lock nesting notation

4 locks held by kworker/u2:3/37:
 #0:  ("events_unbound"){.+.+.+}, at: [<9003a0a4>] process_one_work+0x12c/0x430
 #1:  ((&entry->work)){+.+.+.}, at: [<9003a0a4>] process_one_work+0x12c/0x430
 #2:  (&bdev->bd_mutex){+.+.+.}, at: [<9011fd54>] __blkdev_get+0x50/0x380
 #3:  (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330

stack backtrace:
CPU: 0 PID: 37 Comm: kworker/u2:3 Not tainted 4.4.0-rc5+ #189
Workqueue: events_unbound async_run_entry_fn
Stack : 90b38e30 00000021 00000003 9b2a6040 00000000 9005f3f0 904fc8dc 00000025
        906b96e4 00000000 90528648 9b3336c4 904fc8dc 9009bf18 00000002 00000004
        00000000 00000000 9b3336c4 9b3336e4 904fc8dc 9003d074 00000000 90500000
        9005e738 00000000 00000000 00000000 00000000 00000000 00000000 00000000
        6e657665 755f7374 756f626e 0000646e 00000000 00000000 9b00ca00 9b025000
          ...
Call Trace:
[<90009d6c>] show_stack+0x88/0xa4
[<90057744>] __lock_acquire+0x1ce8/0x2154
[<900583e4>] lock_acquire+0x64/0x8c
[<9045ff10>] _raw_spin_lock_irqsave+0x54/0x78
[<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c
[<90283484>] sata_dwc_qc_issue+0x1a8/0x24c
[<9026b39c>] ata_qc_issue+0x1f0/0x410
[<90273c6c>] ata_scsi_translate+0xb4/0x200
[<90276234>] ata_scsi_queuecmd+0xb4/0x330
[<9025800c>] scsi_dispatch_cmd+0xd0/0x128
[<90259934>] scsi_request_fn+0x58c/0x638
[<901a3e50>] __blk_run_queue+0x40/0x5c
[<901a83d4>] blk_queue_bio+0x27c/0x28c
[<901a5914>] generic_make_request+0xf0/0x188
[<901a5a54>] submit_bio+0xa8/0x194
[<9011adcc>] submit_bh_wbc.isra.23+0x15c/0x17c
[<9011c908>] block_read_full_page+0x3e4/0x428
[<9009e2e0>] do_read_cache_page+0xac/0x210
[<9009fd90>] read_cache_page+0x18/0x24
[<901bbd18>] read_dev_sector+0x38/0xb0
[<901bd174>] msdos_partition+0xb4/0x5c0
[<901bcb8c>] check_partition+0x140/0x274
[<901bba60>] rescan_partitions+0xa0/0x2b0
[<9011ff68>] __blkdev_get+0x264/0x380
[<901201ac>] blkdev_get+0x128/0x36c
[<901b9378>] add_disk+0x3c0/0x4bc
[<90268268>] sd_probe_async+0x100/0x224
[<90043a44>] async_run_entry_fn+0x50/0x124
[<9003a11c>] process_one_work+0x1a4/0x430
[<9003a4f4>] worker_thread+0x14c/0x4fc
[<900408f4>] kthread+0xd0/0xe8
[<90004338>] ret_from_kernel_thread+0x14/0x1c

Fixes: 62936009f3 ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex")
Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10 12:29:17 -04:00
Hannes Reinecke 6d1003ae8d libata: support host-aware and host-managed ZAC devices
Byte 69 bits 0:1 in the IDENTIFY DEVICE data indicate a
host-aware ZAC device.
Host-managed ZAC devices have their own individual signature,
and to not set the bits in the IDENTIFY DEVICE data.
And whenever we detect a ZAC-compatible device we should
be displaying the zoned block characteristics VPD page.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:46 -04:00
Hannes Reinecke 856c466393 libata: support device-managed ZAC devices
Device-managed ZAC devices just set the zoned capabilities field
in INQUIRY byte 69 (cf ACS-4). This corresponds to the 'zoned'
field in the block device characteristics VPD page.
As this is only defined in SPC-5/SBC-4 we also need to update
the supported SCSI version descriptor.

Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:46 -04:00
Hannes Reinecke 284b3b77ea libata: NCQ encapsulation for ZAC MANAGEMENT OUT
Add NCQ encapsulation for ZAC MANAGEMENT OUT and evaluate
NCQ Non-Data log pages to figure out if NCQ encapsulation
is supported.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:46 -04:00
Hannes Reinecke 27708a9579 libata: Implement ZBC OUT translation
ZAC drives implement a 'ZAC Management Out' command template,
which maps onto the ZBC OUT command.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:46 -04:00
Hannes Reinecke 28a3fc2295 libata: implement ZBC IN translation
ZAC drives implement a 'ZAC Management In' command template,
which maps onto the ZBC IN command.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:46 -04:00
Hannes Reinecke 59f68474c2 libata-scsi: Generate sense code for disabled devices
If a device is disabled after error recovery it doesn't make
any sense to generate an ATA sense, but we should rather
return a generic sense code indicating the device is gone.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:45 -04:00
Hannes Reinecke a570384964 libata-trace: decode subcommands
Some commands like FPDMA RECEIVE or NCQ NON DATA can encapsulate
other commands to NCQ transport. So decode the subcmds, too.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:45 -04:00
Hannes Reinecke fe5af0cc30 libata: Check log page directory before accessing pages
When reading the NCQ Send/Recv log it might actually not
supported, thereby causing irritating messages
'READ LOG DMA EXT failed'.
Instead we should be reading the log directory first to
figure out if the log is actually supported before trying
to access it.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:45 -04:00
Hannes Reinecke 5a2335512a libata: Separate out ata_dev_config_ncq_send_recv()
Move NCQ SEND/RECEIVE checks into a separate function.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:45 -04:00
Hannes Reinecke d238ffd59d libata: do not attempt to retrieve sense code twice
Do not call ata_request_sense() if the sense code is already
present.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:44 -04:00
Tejun Heo 698f6700a6 Merge branch '4.7/scsi-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi into for-4.7-zac
Pulling in the dependencies for further ZAC changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:34:39 -04:00
Andy Shevchenko 26f588308e libata-scsi: use %*ph to dump small buffers
Replace custom approach by %*ph specifier to dump small buffers in hex format.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:30:32 -04:00
Andy Shevchenko 3a14c66d43 dmaengine: dw: pass platform data via struct dw_dma_chip
We pass struct dw_dma_chip to dw_dma_probe() anyway, thus we may use it to
pass a platform data as well.

While here, constify the source of the platform data.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-02 15:31:05 +05:30
Ming Lin 65e8617fba scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS
Rename SCSI_MAX_SG_SEGMENTS to SG_CHUNK_SIZE, which means the amount
we fit into a single scatterlist chunk.

Rename SCSI_MAX_SG_CHAIN_SEGMENTS to SG_MAX_SEGMENTS.

Will move these 2 generic definitions to scatterlist.h later.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bart Van Assche <bart.vanassche@sandisk.com> (for ib_srp changes)
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15 16:53:14 -04:00
Brijesh Singh 535dac4ab5 ata: add AMD Seattle platform driver
AMD Seattle SATA controller mostly conforms to AHCI interface with some
special register to control SGPIO interface. In the case of an AHCI
controller, the SGPIO feature is ideally implemented using the
"Enclosure Management" register of the AHCI controller, but those
registeres are not implemented in the Seattle SoC. Instead SoC
(Rev B0 onwards) provides a 32-bit SGPIO control register which should
be programmed to control the activity, locate and fault LEDs.

The driver is based on ahci_platform driver.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: tj@kernel.org
CC: linux-ide@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-13 15:14:24 -04:00
Masanari Iida c9b5560aac treewide: Fix typos in libata.xml
This patch fix spelling typos found in Documentation/Docbook/libata.xml.
It is because the file was generated from comments in source,
I had to fix comments in libata-core.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-13 13:38:16 -04:00
Andy Shevchenko c422025c18 dmaengine: dw: rename masters to reflect actual topology
The source and destination masters are reflecting buses or their layers to
where the different devices can be connected. The patch changes the master
names to reflect which one is related to which independently on the transfer
direction.

The outcome of the change is that the memory data width is now always limited
by a data width of the master which is dedicated to communicate to memory.

The patch will not break anything since all current users have the same data
width for all masters. Though it would be nice to revisit avr32 platforms to
check what is the actual hardware topology in use there. It seems that it has
one bus and two masters on it as stated by Table 8-2, that's why everything
works independently on the master in use. The purpose of the sequential patch
is to fix the driver for configuration of more than one bus.

The change is done in the assumption that src_master and dst_master are
reflecting a connection to the memory and peripheral correspondently on avr32
and otherwise on the rest.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-13 21:36:09 +05:30
Damien Le Moal 974e0a4537 libata-core: Allow longer timeout for drive spinup from PUIS
When spinning up a drive from powered on standby mode (PUIS),
SETFEATURES_SPINUP is executed with the default timeout used
for any SETFEATURES subcommand, that is 5+10 seconds. The
total 15s is too short for some drives to complete spinup
(e.g. drives with a large indirection table stored on media),
resulting in ata_dev_read_id to fail twice on the execution
of SETFEATURES_SPINUP. For this feature, allow a larger
default timeout of 30 seconds. However, in the same spirit
as with the timeout of other feature subcommands, do not
ignore ata_probe_timeout if it is set).

Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:17:09 -04:00
Hannes Reinecke 7780081c1f libata-scsi: Set information sense field for invalid parameter
Whenever the sense key is set to 'invalid parameter' we should
be filling out the sense-key specific information field in the
sense buffer.

tj: Added description of @fp for ata_mselect_*().

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:42 -04:00
Hannes Reinecke 0df10b84af libata-scsi: set bit pointer for sense code information
When generating a sense code of 'Invalid field in CDB' we
should be setting the bit pointer where appropriate.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:42 -04:00
Hannes Reinecke bcfc867d46 libata-scsi: Set field pointer in sense code
If the sense code is 'Invalid field in CDB' we should be
setting the field pointer to the offending byte.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:42 -04:00
Hannes Reinecke 06dbde5f3a libata: Implement control mode page to select sense format
Implement MODE SELECT for the control mode page to allow the OS
to switch to descriptor sense.

tj: Dropped s/sb/cmd->sense_buffer/ in ata_gen_ata_sense().  Added
    @dev description to ata_msense_ctl_mode().

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:41 -04:00
Hannes Reinecke 11093cb1ef libata-scsi: generate correct ATA pass-through sense
Generate ATA pass-through sense for both fixed and descriptor
format sense.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:41 -04:00
Hannes Reinecke 3852e37382 libata: evaluate SCSI sense code
Whenever a sense code is set it would need to be evaluated to
update the error mask.

tj: Cosmetic formatting updates.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:41 -04:00
Hannes Reinecke b525e7731b libata-scsi: use ata_scsi_set_sense()
Use ata_scsi_set_sense() throughout to ensure the sense code
format is consistent.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:41 -04:00
Hannes Reinecke 492bf62107 libata-eh: Set 'information' field for autosense
If NCQ autosense or the sense data reporting feature is enabled
the LBA of the offending command should be stored in the sense
data 'information' field.

tj: s/(u64)-1/U64_MAX/

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:41 -04:00
Hannes Reinecke cf8b49b0af libata-scsi: use scsi_set_sense_information()
Use scsi_set_sense_information() instead of hand-crafted function.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:40 -04:00
Hannes Reinecke cffd1ee991 libata: sanitize ata_tf_read_block()
Return U64_MAX if ata_tf_read_block() could not decode the LBA
address, and do not set the information sense descriptor in
ata_gen_ata_sense() in these cases.

tj: s/(u64)-1/U64_MAX/

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:40 -04:00
Hannes Reinecke 5e6acd1c8c libata-scsi: sanitize ata_gen_ata_sense()
ata_to_sense_error() is called conditionally, so we should be
generating a default sense if the condition is not met.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:40 -04:00
Hannes Reinecke e87fd28cf9 libata: Implement support for sense data reporting
ACS-4 defines a sense data reporting feature set.
This patch implements support for it.

tj: Cosmetic formatting updates.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:40 -04:00
Hannes Reinecke 5b01e4b9ef libata: Implement NCQ autosense
Some newer devices support NCQ autosense (cf ACS-4), so we should
be using it to retrieve the sense code and speed up recovery.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04 12:07:40 -04:00
Srinivas Kandagatla 17dcc37e3e ata: ahci-platform: Add ports-implemented DT bindings.
On some SOCs PORTS_IMPL register value is never programmed by the
firmware and left at zero value. Which means that no sata ports are
available for software. AHCI driver used to cope up with this by
fabricating the port_map if the PORTS_IMPL register is read zero,
but recent patch broke this workaround as zero value was valid for
NVMe disks.

This patch adds ports-implemented DT bindings as workaround for this issue
in a way that DT can can override the PORTS_IMPL register in cases where
the firmware did not program it already.

Fixes: 566d1827df ("libata: disable forced PORTS_IMPL for >= AHCI 1.3")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-01 10:30:30 -04:00
Srinivas Kandagatla 2fd0f46cb1 libahci: save port map for forced port map
In usecases where force_port_map is used saved_port_map is never set,
resulting in not programming the PORTS_IMPL register as part of initial
config. This patch fixes this by setting it to port_map even in case
where force_port_map is used, making it more inline with other parts of
the code.

Fixes: 566d1827df ("libata: disable forced PORTS_IMPL for >= AHCI 1.3")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-01 10:30:30 -04:00
Sander Eikelenboom d991c872ac libata: Fixup awkward whitespace in warning by removing line continuation.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-30 13:01:12 -04:00
Linus Torvalds fcab86add7 Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - ahci grew runtime power management support so that the controller can
   be turned off if no devices are attached.

 - sata_via isn't dead yet.  It got hotplug support and more refined
   workaround for certain WD drives.

 - Misc cleanups.  There's a merge from for-4.5-fixes to avoid confusing
   conflicts in ahci PCI ID table.

* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: ahci_xgene: dereferencing uninitialized pointer in probe
  AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs
  ata: sata_rcar: Use ARCH_RENESAS
  sata_via: Implement hotplug for VT6421
  sata_via: Apply WD workaround only when needed on VT6421
  ahci: Add runtime PM support for the host controller
  ahci: Add functions to manage runtime PM of AHCI ports
  ahci: Convert driver to use modern PM hooks
  ahci: Cache host controller version
  scsi: Drop runtime PM usage count after host is added
  scsi: Set request queue runtime PM status back to active on resume
  block: Add blk_set_runtime_active()
  ata: ahci_mvebu: add support for Armada 3700 variant
  libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
  libata: support AHCI on OCTEON platform
2016-03-18 20:06:46 -07:00
Linus Torvalds 814a2bf957 Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:

 - a couple of hotfixes

 - the rest of MM

 - a new timer slack control in procfs

 - a couple of procfs fixes

 - a few misc things

 - some printk tweaks

 - lib/ updates, notably to radix-tree.

 - add my and Nick Piggin's old userspace radix-tree test harness to
   tools/testing/radix-tree/.  Matthew said it was a godsend during the
   radix-tree work he did.

 - a few code-size improvements, switching to __always_inline where gcc
   screwed up.

 - partially implement character sets in sscanf

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  sscanf: implement basic character sets
  lib/bug.c: use common WARN helper
  param: convert some "on"/"off" users to strtobool
  lib: add "on"/"off" support to kstrtobool
  lib: update single-char callers of strtobool()
  lib: move strtobool() to kstrtobool()
  include/linux/unaligned: force inlining of byteswap operations
  include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
  include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
  usb: common: convert to use match_string() helper
  ide: hpt366: convert to use match_string() helper
  ata: hpt366: convert to use match_string() helper
  power: ab8500: convert to use match_string() helper
  power: charger_manager: convert to use match_string() helper
  drm/edid: convert to use match_string() helper
  pinctrl: convert to use match_string() helper
  device property: convert to use match_string() helper
  lib/string: introduce match_string() helper
  radix-tree tests: add test for radix_tree_iter_next
  radix-tree tests: add regression3 test
  ...
2016-03-18 19:26:54 -07:00
Linus Torvalds 1a46712aa9 This is the bulk of GPIO changes for kernel v4.6:
Core changes:
 
 - The gpio_chip is now a *real device*. Until now the gpio chips
   were just piggybacking the parent device or (gasp) floating in
   space outside of the device model. We now finally make GPIO chips
   devices. The gpio_chip will create a gpio_device which contains
   a struct device, and this gpio_device struct is kept private.
   Anything that needs to be kept private from the rest of the kernel
   will gradually be moved over to the gpio_device.
 
 - As a result of making the gpio_device a real device, we have added
   resource management, so devm_gpiochip_add_data() will cut down on
   overhead and reduce code lines. A huge slew of patches convert
   almost all drivers in the subsystem to use this.
 
 - Building on making the GPIO a real device, we add the first step
   of a new userspace ABI: the GPIO character device. We take small
   steps here, so we first add a pure *information* ABI and the tool
   "lsgpio" that will list all GPIO devices on the system and all
   lines on these devices. We can now discover GPIOs properly from
   userspace. We still have not come up with a way to actually *use*
   GPIOs from userspace.
 
 - To encourage people to use the character device for the future,
   we have it always-enabled when using GPIO. The old sysfs ABI is
   still opt-in (and can be used in parallel), but is marked as
   deprecated. We will keep it around for the foreseeable future,
   but it will not be extended to cover ever more use cases.
 
 Cleanup:
 
 - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
   includes. This dates back to when GPIO was an opt-in feature and
   no shared library even existed: just a header file with proper
   prototypes was provided and all semantics were up to the arch to
   implement. These patches make the GPIO chip even more a proper
   device and cleans out leftovers of the old in-kernel API here
   and there. Still some cruft is left but it's very little now.
 
 - There is still some clamping of return values for .get() going
   on, but we now return sane values in the vast majority of drivers
   and the errorpath is sanitized. Some patches for powerpc, blackfin
   and unicore still drop in.
 
 - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
   implementations to use gpiochip_add_data() and cut down on code
   lines.
 
 - MPC8xxx is converted to use the generic GPIO helpers.
 
 - ATH79 is converted to use the generic GPIO helpers.
 
 New drivers:
 
 - WinSystems WS16C48
 
 - Acces 104-DIO-48E
 
 - F81866 (a F7188x variant)
 
 - Qoric (a MPC8xxx variant)
 
 - TS-4800
 
 - SPI serializers (pisosr): simple 74xx shift registers connected
   to SPI to obtain a dirt-cheap output-only GPIO expander.
 
 - Texas Instruments TPIC2810
 
 - Texas Instruments TPS65218
 
 - Texas Instruments TPS65912
 
 - X-Gene (ARM64) standby GPIO controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6m24AAoJEEEQszewGV1zUasP/RpTrjRcNI5QFHjudd2oioDx
 R/IljC06Q072ZqVy/MR7QxwhoU8jUnCgKgv4rgMa1OcfHblxC2R1+YBKOUSij831
 E+SYmYDYmoMhN7j5Aslr66MXg1rLdFSdCZWemuyNruAK8bx6cTE1AWS8AELQzzTn
 Re/CPpCDbujLy0ZK2wJHgr9ZkdcBGICtDRCrOR3Kyjpwk/DSZcruK1PDN+VQMI3k
 bJlwgtGenOHINgCq/16edpwj/hzmoJXhTOZXJHI5XVR6czTwb3SvCYACvCkauI/a
 /N7b3quG88b5y0OPQPVxp5+VVl9GyVcv5oGzIfTNat/g5QinShZIT4kVV9r0xu6/
 TQHh1HlXleh+QI3yX0oRv9ztHreMf+vdpw1dhIwLqHqfJ7AWdOGk7BbKjwCrsOoq
 t/qUVFnyvooLpyr53Z5JY8+LqyynHF68G+jUQyHLgTZ0GCE+z+1jqNl1T501n3kv
 3CSlNYxSN/YUBN3cnroAIU/ZWcV4YRdxmOtEWP+7xgcdzTE6s/JHb2fuEfVHzWPf
 mHWtJGy8U0IR4VSSEln5RtjhRr0PAjTHeTOGAmivUnaIGDziTowyUVF+X5hwC77E
 DGTuLVx/Kniv173DK7xNAsUZNAETBa3fQZTgu+RfOpMiM1FZc7tI1rd7K7PjbyCc
 d2M0gcq+d11ITJTxC7OM
 =9AJ4
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel v4.6.  There is quite a
  lot of interesting stuff going on.

  The patches to other subsystems and arch-wide are ACKed as far as
  possible, though I consider things like per-arch <asm/gpio.h> as
  essentially a part of the GPIO subsystem so it should not be needed.

  Core changes:

   - The gpio_chip is now a *real device*.  Until now the gpio chips
     were just piggybacking the parent device or (gasp) floating in
     space outside of the device model.

     We now finally make GPIO chips devices.  The gpio_chip will create
     a gpio_device which contains a struct device, and this gpio_device
     struct is kept private.  Anything that needs to be kept private
     from the rest of the kernel will gradually be moved over to the
     gpio_device.

   - As a result of making the gpio_device a real device, we have added
     resource management, so devm_gpiochip_add_data() will cut down on
     overhead and reduce code lines.  A huge slew of patches convert
     almost all drivers in the subsystem to use this.

   - Building on making the GPIO a real device, we add the first step of
     a new userspace ABI: the GPIO character device.  We take small
     steps here, so we first add a pure *information* ABI and the tool
     "lsgpio" that will list all GPIO devices on the system and all
     lines on these devices.

     We can now discover GPIOs properly from userspace.  We still have
     not come up with a way to actually *use* GPIOs from userspace.

   - To encourage people to use the character device for the future, we
     have it always-enabled when using GPIO.  The old sysfs ABI is still
     opt-in (and can be used in parallel), but is marked as deprecated.

     We will keep it around for the foreseeable future, but it will not
     be extended to cover ever more use cases.

  Cleanup:

   - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
     includes.

     This dates back to when GPIO was an opt-in feature and no shared
     library even existed: just a header file with proper prototypes was
     provided and all semantics were up to the arch to implement.  These
     patches make the GPIO chip even more a proper device and cleans out
     leftovers of the old in-kernel API here and there.

     Still some cruft is left but it's very little now.

   - There is still some clamping of return values for .get() going on,
     but we now return sane values in the vast majority of drivers and
     the errorpath is sanitized.  Some patches for powerpc, blackfin and
     unicore still drop in.

   - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
     implementations to use gpiochip_add_data() and cut down on code
     lines.

   - MPC8xxx is converted to use the generic GPIO helpers.

   - ATH79 is converted to use the generic GPIO helpers.

  New drivers:

   - WinSystems WS16C48

   - Acces 104-DIO-48E

   - F81866 (a F7188x variant)

   - Qoric (a MPC8xxx variant)

   - TS-4800

   - SPI serializers (pisosr): simple 74xx shift registers connected to
     SPI to obtain a dirt-cheap output-only GPIO expander.

   - Texas Instruments TPIC2810

   - Texas Instruments TPS65218

   - Texas Instruments TPS65912

   - X-Gene (ARM64) standby GPIO controller"

* tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits)
  Revert "Share upstreaming patches"
  gpio: mcp23s08: Fix clearing of interrupt.
  gpiolib: Fix comment referring to gpio_*() in gpiod_*()
  gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
  gpio: xgene: Fix kconfig for standby GIPO contoller
  gpio: Add generic serializer DT binding
  gpio: uapi: use 0xB4 as ioctl() major
  gpio: tps65912: fix bad merge
  Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
  gpio: omap: drop dev field from gpio_bank structure
  gpio: mpc8xxx: Slightly update the code for better readability
  gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
  gpio: mpc8xxx: Fixup setting gpio direction output
  gpio: mcp23s08: Add support for mcp23s18
  dt-bindings: gpio: altera: Fix altr,interrupt-type property
  gpio: add driver for MEN 16Z127 GPIO controller
  gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
  gpio: timberdale: Switch to devm_ioremap_resource()
  gpio: ts4800: Add IMX51 dependency
  gpiolib: rewrite gpiodev_add_to_list
  ...
2016-03-17 21:05:32 -07:00
Andy Shevchenko 908913bdbd ata: hpt366: convert to use match_string() helper
The new helper returns index of the mathing string in an array.  We
would use it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Linus Torvalds 63e30271b0 PCI changes for the v4.6 merge window:
Enumeration
     Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
     Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
 
   Resource management
     Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
     Don't assign or reassign immutable resources (Bjorn Helgaas)
     Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
     Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
     Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
     ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
     ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
     Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
     rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
     designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
 
   Virtualization
     Wait for up to 1000ms after FLR reset (Alex Williamson)
     Support SR-IOV on any function type (Kelly Zytaruk)
     Add ACS quirk for all Cavium devices (Manish Jaggi)
 
   AER
     Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
     Restore pci_ops pointer while calling original pci_ops (David Daney)
     Fix aer_inject error codes (Jean Delvare)
     Use dev_warn() in aer_inject (Jean Delvare)
     Log actual error causes in aer_inject (Jean Delvare)
     Log aer_inject error injections (Jean Delvare)
 
   VPD
     Prevent VPD access for buggy devices (Babu Moger)
     Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
     Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
     Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
     Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
     Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
     Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
     Update VPD definitions (Hannes Reinecke)
     Allow access to VPD attributes with size 0 (Hannes Reinecke)
     Determine actual VPD size on first access (Hannes Reinecke)
 
   Generic host bridge driver
     Move structure definitions to separate header file (David Daney)
     Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
     Expose pci_host_common_probe() for use by other drivers (David Daney)
 
   Altera host bridge driver
     Fix altera_pcie_link_is_up() (Ley Foon Tan)
 
   Cavium ThunderX host bridge driver
     Add PCIe host driver for ThunderX processors (David Daney)
     Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
 
   Freescale i.MX6 host bridge driver
     Add DT bindings to configure PHY Tx driver settings (Justin Waters)
     Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
     Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
     Remove broken Gen2 workaround (Lucas Stach)
     Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
 
   Freescale Layerscape host bridge driver
     Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
 
   Intel VMD host bridge driver
     Attach VMD resources to parent domain's resource tree (Jon Derrick)
     Set bus resource start to 0 (Keith Busch)
 
   Microsoft Hyper-V host bridge driver
     Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
     Look up IRQ domain by fwnode_handle (Jake Oshins)
     Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
 
   NVIDIA Tegra host bridge driver
     Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
     Implement ->{add,remove}_bus() callbacks (Thierry Reding)
     Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
     Track bus -> CPU mapping (Thierry Reding)
     Remove misleading PHYS_OFFSET (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     ARC: Add PCI support (Joao Pinto)
     Add generic dw_pcie_wait_for_link() (Joao Pinto)
     Add default link up check if sub-driver doesn't override (Joao Pinto)
     Add driver for prototyping kits based on ARC SDP (Joao Pinto)
 
   TI Keystone host bridge driver
     Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
 
   Xilinx AXI host bridge driver
     Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
     Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
     Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
     Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
     microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
 
   Xilinx NWL host bridge driver
     Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
 
   Miscellaneous
     Check device_attach() return value always (Bjorn Helgaas)
     Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
     Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
     Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
     unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
     Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
     Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
     Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
     frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
     Move pci_dma_* helpers to common code (Christoph Hellwig)
     Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
     Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
     Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6XgMAAoJEFmIoMA60/r8Yq4P/1nNwwZPikU+9Z8k0HyGPll6
 vqXBOYj/wlbAxJTzH2weaoyUamFrwvsKaO3Vap3xHkAeTFPD/Dp0TipCCNMrZ82Z
 j1y83JJpenkRyX6ifLARCNYpOtvnvgzSrO9x7Sb2Xfqb64dPb7+jGAfOpGNzhKsO
 n1nj/L7RGx8Q6fNFGf8ANMXKTsdkdL+1pdwegjUXmD5WdOT+oW8DmqVbhyfSKwl0
 E8r4Ml2lIg7Qd5Wu5iKMIBsR0+5HEyrwV7ch92wXChwKfoRwG70qnn7FGdc0y5ZB
 XvJuj8UD5UeMxEUeoRa9SwU6wWQT3Q9e6BzMS+P+43z36SPYjMfy/Xffv054z/bY
 rQomLjuGxNLESpmfNK5JfKxWoe2YNXjHQIDWMrAHyNlwdKJbYiwPcxnZJhvOa/eB
 p0QYcGS7O43STjibG9PZhzeq8tuSJRshxi0W6iB9QlqO8qs8nJQxIO+sZj/vl4yz
 lSnswWcV9062KITl8Fe9xDw244/RTz1xSVCdldlSoDhJyeMOjRvzS8raUMyyVmbA
 YULsI3l2iCl+fwDm/T21o7hJG966oYdAmgEv7lc7BWfgEAMg//LZXvMzVvrPFB2D
 R77u/0idtOciVJrmnO/x9DnQO2hzro9SLmVH6m0+0YU4wSSpZfGn98PCrtkatOAU
 c8zT9dJgyJVE3Z7cnPJ4
 =otsF
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
2016-03-16 14:45:55 -07:00
Dan Carpenter 8134233e8d ata: ahci_xgene: dereferencing uninitialized pointer in probe
If the call to acpi_get_object_info() fails then "info" hasn't been
initialized.  In that situation, we already know that "version" should
be XGENE_AHCI_V1 so we don't actually need to dereference "info".

Fixes: c9802a4be6 ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11 12:40:34 -05:00
Scott Lawson 8ba559fd09 AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs
These PCI device IDs have been removed from the Intel Lewisburg design
specification. They are no longer needed.

Signed-off-by: Scott Lawson <scott.lawson@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11 12:31:49 -05:00
Tejun Heo fe6c58146d Merge branch 'for-4.5-fixes' into for-4.6 2016-03-11 12:30:17 -05:00
Simon Horman 51b1b2867b ata: sata_rcar: Use ARCH_RENESAS
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-04 07:47:00 -05:00
Manuel Lauss dc8b4afc4a ata: ahci: don't mark HotPlugCapable Ports as external/removable
The HPCP bit is set by bioses for on-board sata ports either because
they think sata is hotplug capable in general or to allow Windows
to display a "device eject" icon on ports which are routed to an
external connector bracket.

However in Redhat Bugzilla #1310682, users report that with kernel 4.4,
where this bit test first appeared, a lot of partitions on sata drives
are now mounted automatically.

This patch should fix redhat and a lot of other distros which
unconditionally automount all devices which have the "removable"
bit set.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 8a3e33cf92 ("ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior)
Link: http://lkml.kernel.org/g/56CF35FA.1070500@redhat.com
Cc: stable@vger.kernel.org #v4.4+
2016-02-29 16:17:57 -05:00
Tirumalesh Chalamarla d243bed32f ahci: Workaround for ThunderX Errata#22536
Due to Errata in ThunderX, HOST_IRQ_STAT should be
cleared before leaving the interrupt handler.
The patch attempts to satisfy the need.

Changes from V2:
	- removed newfile
	- code is now under CONFIG_ARM64

Changes from V1:
	- Rebased on top of libata/for-4.6
        - Moved ThunderX intr handler to new file

tj: Minor adjustments to comments.

Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-29 16:16:26 -05:00
Ondrej Zary 57e5568fda sata_via: Implement hotplug for VT6421
Enable IRQ on hotplug and add an interrupt handler to handle it.

This allows hotplug to work:
ata5: exception Emask 0x10 SAct 0x0 SErr 0x70000 action 0xe frozen
ata5: SError: { PHYRdyChg PHYInt CommWake }
ata5: hard resetting link
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata5.00: LPM support broken, forcing max_power
ata5.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
ata5.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata5.00: LPM support broken, forcing max_power
ata5.00: configured for UDMA/133
ata5: EH complete
scsi 4:0:0:0: Direct-Access     ATA      WDC WD800JD-75MS 1E04 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] Attached SCSI disk

And also hot unplug:
ata5: exception Emask 0x10 SAct 0x0 SErr 0x1b0000 action 0xe frozen
ata5: SError: { PHYRdyChg PHYInt 10B8B Dispar }
ata5: hard resetting link
ata5: SATA link down (SStatus 0 SControl 310)
ata5: hard resetting link
ata5: SATA link down (SStatus 0 SControl 310)
ata5: hard resetting link
ata5: SATA link down (SStatus 0 SControl 310)
ata5.00: disabled
ata5: EH complete
ata5.00: detaching (SCSI 4:0:0:0)
sd 4:0:0:0: [sdb] Synchronizing SCSI cache
sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 4:0:0:0: [sdb] Stopping disk
sd 4:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-25 13:22:16 -05:00
Ondrej Zary 44a9b494f2 sata_via: Apply WD workaround only when needed on VT6421
Currently, workaround for broken WD drives is applied always, slowing
down all drives. And it has a bug - it's not applied after resume.

Apply the workaround only if the error really appears
(SErr == 0x1000500). This allows unaffected drives to run at full speed
(provided that no affected drive is connected to the controller).
Also make sure the workaround is re-applied on resume.

Tested on VT6421.
As SCR registers access is known to cause problems on VT6420 (and I
don't have it to test), keep the workaround applied always on VT6420.

Unaffected drive (Hitachi HDS721680PLA380):
Before:
$ hdparm -t --direct /dev/sdb
/dev/sdb:
 Timing O_DIRECT disk reads: 160 MB in  3.01 seconds =  53.16 MB/sec

After:
$ hdparm -t --direct /dev/sdb
/dev/sdb:
 Timing O_DIRECT disk reads: 200 MB in  3.01 seconds =  66.47 MB/sec

Affected drive (WDC WD5003ABYX-18WERA0):
Before:
$ hdparm -t --direct /dev/sda

/dev/sda:
 Timing O_DIRECT disk reads: 180 MB in  3.02 seconds =  59.51 MB/sec

After:
$ hdparm -t --direct /dev/sdb
/dev/sdb:
 Timing O_DIRECT disk reads: 156 MB in  3.03 seconds =  51.48 MB/sec
$ hdparm -t --direct /dev/sdb
/dev/sdb:
 Timing O_DIRECT disk reads: 180 MB in  3.02 seconds =  59.64 MB/sec

The first hdparm is slower because of the error:
[   50.408042] ata5: Incompatible drive: enabling workaround. This slows down transfer rate to ~60 MB/s
[   50.728052] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   50.744834] ata5.00: configured for UDMA/133

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-25 13:17:53 -05:00
Mika Westerberg 02e53293ea ahci: Add runtime PM support for the host controller
This patch adds runtime PM support for the AHCI host controller driver so
that the host controller is powered down when all SATA ports are runtime
suspended. Powering down the AHCI host controller can reduce power
consumption and possibly allow the CPU to enter lower power idle states
(S0ix) during runtime.

Runtime PM is blocked by default and needs to be unblocked from userspace
as needed (via power/* sysfs nodes).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19 10:52:46 -05:00
Mika Westerberg bb03c64069 ahci: Add functions to manage runtime PM of AHCI ports
Add new functions ahci_rpm_get_port()/ahci_rpm_put_port() that change
runtime PM status of AHCI ports. Depending if the AHCI host has runtime PM
enabled or disabled calling these may trigger runtime suspend/resume of the
host controller.

We also call these functions in appropriate places to make sure host
controller registers are available before using them.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19 10:52:46 -05:00
Mika Westerberg f1d848f9fb ahci: Convert driver to use modern PM hooks
In order to add support for runtime PM to the ahci driver we first need to
convert the driver to use modern non-legacy system suspend hooks. There
should be no functional changes.

tj: Updated .driver.pm init for older compilers as suggested by Andy
    and Chrsitoph.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19 10:52:46 -05:00
Mika Westerberg 8ea909cb35 ahci: Cache host controller version
This allows sysfs nodes to read the cached value directly instead of
powering up possibly runtime suspended controller.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-19 10:52:46 -05:00
Lior Amsalem 15d3ce7b63 ata: ahci_mvebu: add support for Armada 3700 variant
The main difference in the new Armada 3700 is that no address
decoding needs to take place in the driver probe.

[gregory.clement@free-electrons.com: reformulate the commit log]

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-18 12:41:17 -05:00
Tejun Heo 3948b6f2b7 libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
ata_scsi_park_show() was pairing spin_lock_irqsave() with
spin_unlock_irq().  As the function is always called with irq enabled,
it didn't actually break anything.  Use spin_lock_irq() instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Elias Oltmanns <eo@nebensachen.de>
2016-02-18 11:53:17 -05:00
Alexandra Yates f5bdd66c70 Adding Intel Lewisburg device IDs for SATA
This patch complements the list of device IDs previously
added for lewisburg sata.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2016-02-18 11:28:31 -05:00
Gabor Juhos 018361767a pata-rb532-cf: get rid of the irq_to_gpio() call
The RB532 platform specific irq_to_gpio() implementation has been
removed with commit 832f5dacfa ("MIPS: Remove all the uses of
custom gpio.h"). Now the platform uses the generic stub which causes
the following error:

  pata-rb532-cf pata-rb532-cf: no GPIO found for irq149
  pata-rb532-cf: probe of pata-rb532-cf failed with error -2

Drop the irq_to_gpio() call and get the GPIO number from platform
data instead. After this change, the driver works again:

  scsi host0: pata-rb532-cf
  ata1: PATA max PIO4 irq 149
  ata1.00: CFA: CF 1GB, 20080820, max MWDMA4
  ata1.00: 1989792 sectors, multi 0: LBA
  ata1.00: configured for PIO4
  scsi 0:0:0:0: Direct-Access     ATA      CF 1GB           0820 PQ: 0\
  ANSI: 5
  sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB)
  sd 0:0:0:0: [sda] Write Protect is off
  sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't\
  support DPO or FUA
   sda: sda1 sda2
  sd 0:0:0:0: [sda] Attached SCSI disk

Fixes: 832f5dacfa ("MIPS: Remove all the uses of custom gpio.h")
Cc: Alban Bedel <albeu@free.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org> #v4.3+
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-18 11:26:27 -05:00
Bjorn Helgaas 288e6eaa06 gpio: Include linux/gpio.h instead of asm/gpio.h
Most arches have an asm/gpio.h that merely includes linux/gpio.h.  The
others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected,
linux/gpio.h includes asm/gpio.h.

Therefore, code should include linux/gpio.h instead of including asm/gpio.h
directly.

Remove includes of asm/gpio.h, adding an include of linux/gpio.h when
necessary.

This is a follow-on to 7563bbf89d ("gpiolib/arches: Centralise
bolierplate asm/gpio.h").

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16 00:20:03 +01:00
Aleksey Makarov a2127e400e libata: support AHCI on OCTEON platform
The OCTEON SATA controller is currently found on cn71XX devices.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Vinita Gupta <vgupta@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11 10:12:04 -05:00
Arnd Bergmann 287e6611ab libata: fix HDIO_GET_32BIT ioctl
As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not
work correctly in compat mode with libata.

I have investigated the issue further and found multiple problems
that all appeared with the same commit that originally introduced
HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably
also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy
a 'long' variable containing either 0 or 1 to user space.

The problems with this are:

* On big-endian machines, this will always write a zero because it
  stores the wrong byte into user space.

* In compat mode, the upper three bytes of the variable are updated
  by the compat_hdio_ioctl() function, but they now contain
  uninitialized stack data.

* The hdparm tool calling this ioctl uses a 'static long' variable
  to store the result. This means at least the upper bytes are
  initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT
  would fill them with data that remains stale when the low byte
  is overwritten. Fortunately libata doesn't implement any of the
  affected ioctl commands, so this would only happen when we query
  both an IDE and an ATA device in the same command such as
  "hdparm -N -c /dev/hda /dev/sda"

* The libata code for unknown reasons started using ATA_IOC_GET_IO32
  and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT,
  while the ioctl commands that were added later use the normal
  HDIO_* names. This is harmless but rather confusing.

This addresses all four issues by changing the code to use put_user()
on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem
does, and by clarifying the names of the ioctl commands.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Soohoon Lee <Soohoon.Lee@f5.com>
Tested-by: Soohoon Lee <Soohoon.Lee@f5.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11 10:07:18 -05:00
Suman Tripathi 32aea2680d ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT.
Due to H/W errata, the HOST_IRQ_STAT register misses the edge interrupt
when clearing the HOST_IRQ_STAT register and hardware reporting the
PORT_IRQ_STAT register happens to be at the same clock cycle.

Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11 09:54:15 -05:00
Suman Tripathi d867b95f96 ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
The flexibility to override the irq handles in the LLD's are already
present, so controllers implementing a edge trigger latch can
implement their own interrupt handler inside the driver.  This patch
removes the AHCI_HFLAG_EDGE_IRQ support from libahci and moves edge
irq handling to ahci_xgene.

tj: Minor update to description.

Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kenrel.org>
2016-02-11 09:54:04 -05:00
Suman Tripathi f070d67155 libahci: Implement the capability to override the generic ahci interrupt handler.
This patch implements the capability to override the generic AHCI
interrupt handler so that specific ahci drivers can implement their
own custom interrupt handler routines.  It also exports
ahci_handle_port_intr so that custom irq_handler implementations can
use it.

tj: s/ahci_irq_handler/irq_handler/ and updated description.

Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-11 09:53:51 -05:00
Alexandra Yates 342decff2b ahci: Intel DNV device IDs SATA
Adding Intel codename DNV platform device IDs for SATA.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2016-02-10 11:35:55 -05:00
Bjorn Helgaas 952bbcb078 PCI: Remove includes of asm/pci-bridge.h
Drivers should include asm/pci-bridge.h only when they need the arch-
specific things provided there.  Outside of the arch/ directories, the only
drivers that actually need things provided by asm/pci-bridge.h are the
powerpc RPA hotplug drivers in drivers/pci/hotplug/rpa*.

Remove the includes of asm/pci-bridge.h from the other drivers, adding an
include of linux/pci.h if necessary.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-05 16:29:28 -06:00
Tejun Heo 8eee1d3ed5 libata: fix sff host state machine locking while polling
The bulk of ATA host state machine is implemented by
ata_sff_hsm_move().  The function is called from either the interrupt
handler or, if polling, a work item.  Unlike from the interrupt path,
the polling path calls the function without holding the host lock and
ata_sff_hsm_move() selectively grabs the lock.

This is completely broken.  If an IRQ triggers while polling is in
progress, the two can easily race and end up accessing the hardware
and updating state machine state at the same time.  This can put the
state machine in an illegal state and lead to a crash like the
following.

  kernel BUG at drivers/ata/libata-sff.c:1302!
  invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  Modules linked in:
  CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000
  RIP: 0010:[<ffffffff83a83409>]  [<ffffffff83a83409>] ata_sff_hsm_move+0x619/0x1c60
  ...
  Call Trace:
   <IRQ>
   [<ffffffff83a84c31>] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584
   [<ffffffff83a85611>] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877
   [<     inline     >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629
   [<ffffffff83a85bf3>] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902
   [<ffffffff81479f98>] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157
   [<ffffffff8147a717>] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205
   [<ffffffff81484573>] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623
   [<     inline     >] generic_handle_irq_desc include/linux/irqdesc.h:146
   [<ffffffff811a92bc>] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78
   [<ffffffff811a7e4d>] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240
   [<ffffffff86653d4c>] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520
   <EOI>
   [<     inline     >] rcu_lock_acquire include/linux/rcupdate.h:490
   [<     inline     >] rcu_read_lock include/linux/rcupdate.h:874
   [<ffffffff8164b4a1>] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145
   [<     inline     >] do_fault_around mm/memory.c:2943
   [<     inline     >] do_read_fault mm/memory.c:2962
   [<     inline     >] do_fault mm/memory.c:3133
   [<     inline     >] handle_pte_fault mm/memory.c:3308
   [<     inline     >] __handle_mm_fault mm/memory.c:3418
   [<ffffffff816efb16>] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447
   [<ffffffff8127dc16>] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238
   [<ffffffff8127e358>] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331
   [<ffffffff8126f514>] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264
   [<ffffffff86655578>] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986

Fix it by ensuring that the polling path is holding the host lock
before entering ata_sff_hsm_move() so that all hardware accesses and
state updates are performed under the host lock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/g/CACT4Y+b_JsOxJu2EZyEf+mOXORc_zid5V1-pLZSroJVxyWdSpw@mail.gmail.com
Cc: stable@vger.kernel.org
2016-02-01 11:33:21 -05:00
Tejun Heo a588afc920 libata-sff: use WARN instead of BUG on illegal host state machine state
ata_sff_hsm_move() triggers BUG if it sees a host state machine state
that it dind't expect.  The risk for data corruption when the
condition occurs is low as it's highly unlikely that it would lead to
spurious completion of commands.  The BUG occasionally triggered for
subtle race conditions in the driver.  Let's downgrade it to WARN so
that it doesn't kill the machine unnecessarily.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
2016-01-29 07:06:53 -05:00
Tejun Heo 566d1827df libata: disable forced PORTS_IMPL for >= AHCI 1.3
Some early controllers incorrectly reported zero ports in PORTS_IMPL
register and the ahci driver fabricates PORTS_IMPL from the number of
ports in those cases.  This hasn't mattered but with the new nvme
controllers there are cases where zero PORTS_IMPL is valid and should
be honored.

Disable the workaround for >= AHCI 1.3.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: stable@vger.kernel.org
2016-01-25 15:45:55 -05:00
Shikha Jain b00622fc34 libata: blacklist a Viking flash model for MWDMA corruption
Viking flash model VRFDFC22048UCHC-TE causes data corruption in MWDMA mode.

Cc: xe-kernel@external.cisco.com
Signed-off-by: Shikha Jain <shikjain@cisco.com>
Signed-off-by: Anil Veliyankara Madam <aveliyan@cisco.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-25 15:24:13 -05:00
Danesh Petigara fb32963355 drivers: ata: wake port before DMA stop for ALPM
The AHCI driver code stops and starts port DMA engines at will
without considering the power state of the particular port. The
AHCI specification isn't very clear on how to handle this scenario,
leaving implementation open to interpretation.

Broadcom's STB SATA host controller is unable to handle port DMA
controller restarts when the port in question is in low power mode.
When a port enters partial or slumber mode, its PHY is powered down.
When a controller restart is requested, the controller's internal
state machine expects the PHY to be brought back up by software which
never happens in this case, resulting in failures.

To avoid this situation, logic is added to manually wake up the port
just before its DMA engine is stopped, if the port happens to be in
a low power state. HBA initiated power management ensures that the port
eventually returns to its configured low power state, when the link is
idle (as per the conditions listed in the spec). A new host flag is also
added to ensure this logic is only exercised for hosts with the above
limitation.

tj: Formatting changes.

Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-25 15:20:44 -05:00
Linus Torvalds 8c930204ce Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
 "Mostly low level driver specific changes.

  Two changes are somewhat noteworthy.  First, Dan's patchset to support
  per-port msix interrupt handling for ahci, which was tried last cycle
  but had to be backed out due to a couple issues, is back and seems to
  be working fine.  Second, libata exception handling now uses
  usleep_range() instead of msleep() for sleeps < 20ms which can make
  things snappier in some corner cases"

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: skip debounce delay on link resume
  ata: ahci_brcmstb: disable DIPM support
  ata: ahci_brcmstb: enable support for ALPM
  drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
  sata_sx4: correctly handling failed allocation
  ata: ahci_brcmstb: add support for MIPS-based platforms
  ahci: qoriq: Adjust the default register values on ls1021a
  ahci: qoriq: Update the default Rx watermark value
  ahci: qoriq: Adjust the default register values on ls1043a
  ahci: compile out msi/msix infrastructure
  ata: core: fix irq description on AHCI single irq systems
  ata: ahci_brcmstb: remove unused definitions
  ata: ahci_brcmstb: add a quirk for MIPS-based platforms
  ata: ahci_brcmstb: disable NCQ for MIPS-based platforms
  ata: sata_rcar: Remove obsolete platform_device_id entries
  sata_rcar: Add compatible string for r8a7795
  ahci: kill 'intr_status'
  ahci: switch from 'threaded' to 'hardirq' interrupt handling
  ahci: per-port msix support
2016-01-11 19:33:59 -08:00
Danesh Petigara e39b2bb3b7 libata: skip debounce delay on link resume
The link resume logic uses a 200msec delay while debouncing
the SControl register. The rationale behind that delay is
to accommodate some PHYs that behave badly if their SStatus/
SControl registers are pounded immediately on resume.
The Broadcom STB SATA PHY does not seem to have this issue.
This patch introduces a new link flag that allows platforms
to skip the debounce delay if it isn't needed.

Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08 11:50:14 -05:00
Danesh Petigara 6ca92dd7af ata: ahci_brcmstb: disable DIPM support
The Broadcom STB SATA host controller does not support device
initiated power management. Disable support for this feature
so the driver never sends SETFEATURES commands to the device
to enable/disable DIPM.

Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08 11:29:38 -05:00
Danesh Petigara 6863caaf15 ata: ahci_brcmstb: enable support for ALPM
Enable support for ALPM in the host controller's capabilities
register. Also adjust the PLL  timeout to give it enough time
to lock when the port exits slumber mode.

tj: minor style updates

Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08 11:28:08 -05:00
Anil Veliyankara Madam 848c392086 drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
Since msleep() may sleep longer than intended time for values less
than 20ms, this patch allows the use of usleep_range for waits less
that 20ms. usleep_range is a finer precision implementation of
msleep and is designed to be a drop-in replacement for udelay
where a precise sleep/busy-wait is unnecessary.

More details can be found at http://lkml.org/lkml/2007/8/3/250
and in Documentation/timers/timers-howto.txt.

This change has been done to improve the performace in PIO6 mode
which is used by viking flash.

Cc: xe-kernel@external.cisco.com
Signed-off-by: Anil Veliyankara Madam <aveliyan@cisco.com>
Signed-off-by: Shikha Jain <shikjain@cisco.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-08 10:36:57 -05:00
Insu Yun 427cc61a44 sata_sx4: correctly handling failed allocation
Since kzalloc can be failed in memory pressure, return error when failed.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-31 21:33:42 -05:00
Jaedon Shin 1980eb9bd7 ata: ahci_brcmstb: add support for MIPS-based platforms
The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.

This new compatible string, "brcm,bcm7425-ahci", may be used for most
MIPS-based platforms of 40nm process technology.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-31 21:19:35 -05:00
Tang Yuantian dfcdc5fe03 ahci: qoriq: Adjust the default register values on ls1021a
Updated the registers' values to enhance SATA performance and
reliability on ls1021a soc.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-16 10:24:35 -05:00
Tang Yuantian e3a6dadc6d ahci: qoriq: Update the default Rx watermark value
The PTC[RXWM] sets the watermark value for Rx FIFO. The default
value 0x20 might be insufficient for some hard drives. If the
watermark value is too small, a single-cycle overflow may occur
and is reported as a CRC or internal error in the PxSERR register.
Updated the value to 0x29 according to the validation test.
All LS platforms are affected.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-16 10:24:35 -05:00
Tang Yuantian ef0cc7fef4 ahci: qoriq: Adjust the default register values on ls1043a
Updated the registers' values to enhance SATA performance and
reliability.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-16 10:24:35 -05:00
Andreas Werner 4f2568f5cb ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log page reads
Every attempt to issue a read log page command lockup the controller.
The command is currently sent if the sata device includes the devlsp feature
to read out the timing data.
This attempt to read the data, locks up the controller and the device
is not recognzied correctly (failed to set xfermode) and cannot be accessed.

This was found on Freescale P1013/P1022 and T4240 CPUs
using a ATP IG mSATA 4GB with the devslp feature.

fsl-sata ff718000.sata: Sata FSL Platform/CSB Driver init
[    1.254195] scsi0 : sata_fsl
[    1.256004] ata1: SATA max UDMA/133 irq 74
[    1.370666] fsl-gianfar ethernet.3: enabled errata workarounds, flags: 0x4
[    1.470671] fsl-gianfar ethernet.4: enabled errata workarounds, flags: 0x4
[    1.775584] ata1: Signature Update detected @ 504 msecs
[    1.947594] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.948366] ata1.00: ATA-8: ATP IG mSATA, 20150311, max UDMA/133
[    1.948371] ata1.00: 7732368 sectors, multi 0: LBA
[    1.948843] ata1.00: failed to get Identify Device Data, Emask 0x1
[    1.948857] ata1.00: failed to set xfermode (err_mask=0x40)
[    7.467557] ata1: Signature Update detected @ 504 msecs
[    7.639560] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.651320] ata1.00: failed to get Identify Device Data, Emask 0x1
[    7.651360] ata1.00: failed to set xfermode (err_mask=0x40)
[    7.655628] ata1: limiting SATA link speed to 1.5 Gbps
[    7.659458] ata1.00: limiting speed to UDMA/133:PIO3
[   13.163554] ata1: Signature Update detected @ 504 msecs
[   13.335558] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   13.347298] ata1.00: failed to get Identify Device Data, Emask 0x1
[   13.347334] ata1.00: failed to set xfermode (err_mask=0x40)
[   13.351601] ata1.00: disabled
[   13.353278] ata1: exception Emask 0x50 SAct 0x0 SErr 0x800 action 0x6 frozen t4
[   13.359281] ata1: SError: { HostInt }
[   13.361644] ata1: hard resetting link

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-07 10:25:57 -05:00
Andreas Werner ea013a9b20 libata-eh.c: Introduce new ata port flag for controller which lockup on read log page
Some controller lockup on a ata_read_log_page.
Add new ata port flag ATA_FLAG_NO_LOG_PAGE which can used
to blacklist a controller.

If this flag is set, any attempt to read a log page returns an error
without actually issuing the command.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-07 10:25:57 -05:00
Dan Williams f893180b79 ahci: compile out msi/msix infrastructure
Quoting Arnd:
    The AHCI driver is used for some on-chip devices that do not use PCI
    for probing, and it can be built even when CONFIG_PCI is disabled, but
    that now results in a build failure:

    ata/libahci.c: In function 'ahci_host_activate_multi_irqs':
    ata/libahci.c:2475:4: error: invalid use of undefined type 'struct msix_entry'
    ata/libahci.c:2475:21: error: dereferencing pointer to incomplete type 'struct msix_entry'

Add ifdef CONFIG_PCI_MSI infrastructure to compile out the multi-msi and
multi-msix code.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested--by: Arnd Bergmann <arnd@arndb.de>
[arnd: fix up pci enabled case]
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Fixes: d684a90d38 ("ahci: per-port msix support")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-12-07 09:50:01 -05:00
Heiner Kallweit 7e22c0024c ata: core: fix irq description on AHCI single irq systems
On my machine with single irq AHCI just the PCI id is printed as
description in /proc/interrupts.
I found a related discussion from beginning of this year:
http://www.gossamer-threads.com/lists/linux/kernel/2117335

Seems like 4f37b50476 ("libata: Use dev_name() for request_irq() to
distinguish devices") tried to fix displaying a proper interrupt
description for one scenario but broke it for another one.

The mentioned discussion ended in the current situation being
considered as broken but w/o a patch to fix it.

The following patch is based on a proposal in this mail thread.
Now the interrupt is properly described as:
PCI-MSI 512000-edge      ahci[0000:00:1f.2]

By combining both values also the scenario that commit 4f37b50476
("libata: Use dev_name() for request_irq() to distinguish devices")
refers to should still be fine. There it should look like this now:
ahci[20100000.ide]

Using managed memory allocation ensures that the irq description
lives at least as long as the interrupt.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
2015-12-07 09:40:50 -05:00
Mikulas Patocka d98f1cd0a3 sata_sil: disable trim
When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any
TRIM command results in I/O errors being reported in the log. There is
other similar error reported with TRIM and the SIL controller:
https://bugs.centos.org/view.php?id=5880

Apparently the controller doesn't support TRIM commands. This patch
disables TRIM support on the SATA SIL controller.

ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata7.00: BMDMA2 stat 0x50001
ata7.00: failed command: DATA SET MANAGEMENT
ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
         res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata7.00: status: { DRDY ERR }
ata7.00: error: { ABRT }
ata7.00: device reported invalid CHS sector 0
sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor]
sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command
sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00
blk_update_request: I/O error, dev sdb, sector 2200968

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-30 10:02:49 -05:00
Xiangliang Yu 023113d24e AHCI: Fix softreset failed issue of Port Multiplier
Current code doesn't update port value of Port Multiplier(PM) when
sending FIS of softreset to device, command will fail if FBS is
enabled.

There are two ways to fix the issue: the first is to disable FBS
before sending softreset command to PM device and the second is
to update port value of PM when sending command.

For the first way, i can't find any related rule in AHCI Spec. The
second way can avoid disabling FBS and has better performance.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-11-30 10:01:29 -05:00
Jaedon Shin 2ef42f4a7e ata: ahci_brcmstb: remove unused definitions
Remove unused definitions, and this is to avoid confusion with MIPS-based
platforms.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
2015-11-30 09:57:33 -05:00
Jaedon Shin b46f79bc78 ata: ahci_brcmstb: add a quirk for MIPS-based platforms
Whereas ARM-based platforms have four phy interface registers and
information, the MIPS-based platforms have only three registers, and
there are no information and documentation. In the original BSP, It
using "strict-ahci" did not control these registers.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
2015-11-30 09:57:32 -05:00
Jaedon Shin 7de3244530 ata: ahci_brcmstb: disable NCQ for MIPS-based platforms
The most MIPS-based platforms need to disable NCQ while have the NCQ
capability in HOST_CAP, and several ARM-based platforms (eg. BCM7349A0,
BCM7445A0, BCM7445B0) need to disable too.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
2015-11-30 09:57:32 -05:00
Geert Uytterhoeven 7f64d64289 ata: sata_rcar: Remove obsolete platform_device_id entries
Since commit c99cd90d98 ("ARM: shmobile: r8a7779: Remove legacy
SoC code"), R-Car SoCs are only supported in generic DT-only ARM
multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the remaining platform_device_id
entries and platform device support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-24 09:54:36 -05:00
Kouei Abe fec7bc433a sata_rcar: Add compatible string for r8a7795
R-Car H3 SoC has compatible SATA controller with R-Car Gen2 SoCs.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-20 15:48:55 -05:00
Arnd Bergmann 4f1dd973ac sata/mvebu: use #ifdef around suspend/resume code
The newly added suspend/resume implementation for ahci_mvebu causes
a link error when CONFIG_PM_SLEEP is disabled:

ERROR: "ahci_platform_suspend_host" [drivers/ata/ahci_mvebu.ko] undefined!
ERROR: "ahci_platform_resume_host" [drivers/ata/ahci_mvebu.ko] undefined!

This adds the same #ifdef here that exists in the ahci_platform driver
which defines the above functions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d6ecf15814 ("ata: ahci_mvebu: add suspend/resume support")
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-20 14:59:43 -05:00
Dan Williams f46c4bd16e ahci: kill 'intr_status'
This field in achi_port_priv was only used to support threaded
interrupts.  Now that we are hardirq only it can be deleted.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16 11:30:12 -05:00
Dan Williams a6b7fb764e ahci: switch from 'threaded' to 'hardirq' interrupt handling
For high frequency I/O the overhead of threaded interrupts impacts
performance.  A quick out-of-the-box test (i.e. no affinity tuning)
shows ~10% random read performance at ~20% less cpu.  The cpu wins
appear to be from reduced lock contention.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16 11:29:10 -05:00
Dan Williams d684a90d38 ahci: per-port msix support
Some AHCI controllers support per-port MSI-X vectors.  At the same time
the Linux AHCI driver needs to support one-off architectures that
implement a single MSI-X vector for all ports.  The heuristic for
enabling AHCI ports becomes, in order of preference:

1/ per-port multi-MSI-X

2/ per-port multi-MSI

3/ single MSI

4/ single MSI-X

5/ legacy INTX

This all depends on AHCI implementations with potentially broken MSI-X
requesting less vectors than the number of ports.  If this assumption is
violated we will need to start explicitly white-listing AHCI-MSIX
implementations.

Reported-by: Ricardo Neri <ricardo.neri@intel.com>
[ricardo: fix struct msix_entry handling]
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16 11:29:10 -05:00
Alexandra Yates 4d92f0099a ahci: Order SATA device IDs for codename Lewisburg
This change was to preserve the ascending order of device IDs.
There was an exception with the first two Lewisburg device IDs to
keep all device IDs of the same kind grouped by code name.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16 11:22:16 -05:00
Charles_Rose@Dell.com c5967b79ec ahci: Add Device ID for Intel Sunrise Point PCH
This patch adds missing AHCI RAID SATA Device IDs for the Intel Sunrise
Point PCH.

Signed-off-by: Nanda Kishore Chinna <nanda_kishore_chinna@dell.com>
Signed-off-by: Charles Rose <charles_rose@dell.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-16 11:19:59 -05:00
Linus Torvalds d83763f4a6 SCSI misc on 20151113
Sorry for the delay in this patch which was mostly caused by getting the
 merger of the mpt2/mpt3sas driver, which was seen as an essential item of
 maintenance work to do before the drivers diverge too much.  Unfortunately,
 this caused a compile failure (detected by linux-next), which then had to be
 fixed up and incubated.  In addition to the mpt2/3sas rework, there are
 updates from pm80xx, lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc
 and ufs plus an assortment of changes including some year 2038 issues, a fix
 for a remove before detach issue in some drivers and a couple of other minor
 issues.
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJWRnpiAAoJEDeqqVYsXL0MJd0IAIkNP1q/6ksMw/lam2UlbdxN
 zFsFOIhGM3xLnBFehbCx7JW3cmybA7WC5jhMjaa1OeJmYHLpwbTzvVwrLs2l/0y1
 /S+G0wwxROZfIKj/1EO3oKbSPCu9N3lStxOnmNXt5PSUEzAXrTqSNTtnMf2ZGh7j
 bQxTWEJe+66GckgGw4ozTXJHWXqM/Zs/FsYjn2h/WzFhFv8utr7zRSzHMVjcqpLG
 TK/Lt03hiTGqiignKrV9W6JzdGTWf2LGIsj/njgR0dxv59cNH8PrHIjZyknSBxgn
 lblinsCjxDHWnP4BSfTi9MQG1lEiZiWO3Y6TKkKJTgxZ9M0Eitspc+cLOiJ1mpg=
 =HvQf
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull final round of SCSI updates from James Bottomley:
 "Sorry for the delay in this patch which was mostly caused by getting
  the merger of the mpt2/mpt3sas driver, which was seen as an essential
  item of maintenance work to do before the drivers diverge too much.
  Unfortunately, this caused a compile failure (detected by linux-next),
  which then had to be fixed up and incubated.

  In addition to the mpt2/3sas rework, there are updates from pm80xx,
  lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus
  an assortment of changes including some year 2038 issues, a fix for a
  remove before detach issue in some drivers and a couple of other minor
  issues"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  mpt3sas: fix inline markers on non inline function declarations
  sd: Clear PS bit before Mode Select.
  ibmvscsi: set max_lun to 32
  ibmvscsi: display default value for max_id, max_lun and max_channel.
  mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
  scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()
  mvumi: 64bit value for seconds_since1970
  be2iscsi: Fix bogus WARN_ON length check
  scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
  mpt3sas: Bump mpt3sas driver version to 09.102.00.00
  mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs
  mpt2sas, mpt3sas: Update the driver versions
  mpt3sas: setpci reset kernel oops fix
  mpt3sas: Added OEM Gen2 PnP ID branding names
  mpt3sas: Refcount fw_events and fix unsafe list usage
  mpt3sas: Refcount sas_device objects and fix unsafe list usage
  mpt3sas: sysfs attribute to report Backup Rail Monitor Status
  mpt3sas: Ported WarpDrive product SSS6200 support
  mpt3sas: fix for driver fails EEH, recovery from injected pci bus error
  mpt3sas: Manage MSI-X vectors according to HBA device type
  ...
2015-11-13 20:35:54 -08:00
Christoph Hellwig 64d513ac31 scsi: use host wide tags by default
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09 17:11:57 -08:00
Tejun Heo 159b5bb464 Merge branch 'for-4.3-fixes' into for-4.4 2015-11-03 17:29:03 -05:00
Alexandra Yates 56e74338a5 ahci: add new Intel device IDs
Adding Intel codename Lewisburg platform device IDs for SATA.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-11-03 17:28:02 -05:00
Johannes Thumshirn a40cf3f388 ahci: Add Marvell 88se91a2 device id
Add device id for Marvell 88se91a2

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31 10:15:48 +09:00
Dan Williams 0a142b2692 ahci: cleanup ahci_host_activate_multi_irqs
With devm there is no need to explicitly free irqs on error.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31 10:04:34 +09:00
Dan Williams 899a63c3eb ahci: ahci_host_activate: kill IRQF_SHARED
MSI messages are per-device, so there will never be another "shared"
device in the interrupt chain.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31 10:04:34 +09:00
Tang Yuantian 640847298e ahci: qoriq: Disable NCQ on ls2080a SoC
NCQ feature can't be used due to the erratum A-008473.
This patch disables NCQ as a workaround.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31 09:52:15 +09:00
Tang Yuantian d19f9aaf01 ahci: qoriq: Rename LS2085A SoC support code to LS2080A
Freescale is renaming the LS2085A SoC to LS2080A.
This patch addresses the same.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-31 09:52:15 +09:00
Vinayak Kale 5f8e7f17f6 libata: enable LBA flag in taskfile for ata_scsi_pass_thru()
Enable LBA in taskfile flags for ata_scsi_pass_thru()

Signed-off-by: Vinayak Kale <vinayak.kale@seagate.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-27 16:48:01 +09:00
Vinayak Kale ee7fb331c3 libata: add support for NCQ commands for SG interface
This patch is needed to make NCQ commands with FPDMA protocol value
(eg READ/WRITE FPDMA) work over SCSI Generic (SG) interface.

Signed-off-by: Vinayak Kale <vinayak.kale@seagate.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-27 15:09:01 +09:00
Arnd Bergmann eb351031a1 ahci: qoriq: Fix a compiling warning
kbuild test robot reports the warnings:
drivers/ata/ahci_qoriq.c: In function 'ahci_qoriq_hardreset':
>> include/asm-generic/io.h:163:2: warning: 'px_is' may be used
>> uninitialized in this function [-Wuninitialized]
drivers/ata/ahci_qoriq.c:70:14: note: 'px_is' was declared here
>> include/asm-generic/io.h:163:2: warning: 'px_cmd' may be used
>> uninitialized in this function [-Wuninitialized]
drivers/ata/ahci_qoriq.c:70:6: note: 'px_cmd' was declared here

This patch fixed it by introducing a local variable.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-15 12:03:00 -04:00
LABBE Corentin 3a53b3bcc7 pata_it821x: use "const char *" for string literals
Some string literals are pointed to by "char *".  This patch fixes
that.

tj: Updated patch title and description.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-15 10:58:53 -04:00
Christoph Hellwig 2aa8f5d63d libata: only call ->done once all per-tag ressources are released
When calling ->done before releasing resources we could run into a
race where the SCSI midlayer sends another command and races with
the resources beeing manipulated.  For libata this can't currently
happen as synchronization happens at a higher level, but I'd still
like to fix it to future proof libata and to avoid copy & paste
into SCSI drivers where this pattern has led to reproducible crashes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-12 13:23:13 -04:00
Christoph Hellwig 25c7ce7f7b libata: cleanup ata_scsi_qc_complete
Remove an incorrect comment and untangle an if statement in
ata_scsi_qc_complete.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-10-04 13:37:58 -04:00
Manuel Lauss 8a3e33cf92 ata: ahci: find eSATA ports and flag them as removable
If the AHCI ports' HPCP or ESP bits are set, the port
should be considered external (e.g. eSATA) and is marked
as removable.  Userspace tools like udisks then treat it
like an usb drive.

With this patch applied, when I plug a drive into the esata port,
KDE pops up a window asking what to do with the drives(s), just
like it does for any random USB stick.

Removability is indicated to the upper layers by way of the
SCSI RMB bit, as I haven't found another way to signal
userspace to treat a sata disk like any usb stick.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-30 17:37:55 -04:00
Andrzej Hajda a73f22f981 libata: samsung_cf: fix handling platform_get_irq result
The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-25 11:50:15 -04:00
Luis de Bethencourt 469eabb3ae ata: pata_macio: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

This patch adds the missing MODULE_DEVICE_TABLE() for OF to export
that information so modules have the correct aliases built-in and
autoloading works correctly.

Link: https://lkml.org/lkml/2015/7/30/519
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-17 11:14:25 -04:00
Robert Jarzmik 88622d80af ata: pata_pxa: dmaengine conversion
The PXA architecture was offered a slave dmaengine support. As a
consequence the direct DMA registers are progressively replaced by
dmaengine support.

This makes the pata_pxa change, which brings this driver to almost a
generic ATA 40-wires driver relying on dmaengine for transfers.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-10 17:02:04 -04:00
Tang Yuantian ecfb459851 ahci: added a new driver for supporting Freescale AHCI sata
Currently Freescale QorIQ series SATA is supported by ahci_platform
driver. Some SoC specific settings have been put in uboot. So whether
SATA works or not heavily depends on uboot.
This patch will add a new driver to support QorIQ sata which removes
the dependency on any other boot loader.
Freescale QorIQ series sata, like ls1021a ls2085a ls1043a, is
compatible with serial ATA 3.0 and AHCI 1.3 specification.

Signed-off-by: Yuantian Tang <Yuantian.Tang@freescale.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-08 12:30:06 -04:00
Tang Yuantian fc4f370d77 Revert "ahci: added support for Freescale AHCI sata"
This reverts commit 5163fb6254
("ahci: added support for Freescale AHCI sata")

The reverted patch added Freescale QorIQ AHCI sata support to
ahci_platform driver though, but it left SoC specific settings to uboot.
It leads to QorIQ sata heavily depending on uboot. In order to removing
the dependency we first revert the old patch and then will add a new driver
for QorIQ SATA.
Since there are no LS* platforms that have been upstreamed, So
the revert would not break anything exists.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-09-08 12:30:06 -04:00
Linus Torvalds 807249d3ad Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.3 for MIPS.  Here's the summary:

  Three fixes that didn't make 4.2-stable:

   - a -Os build might compile the kernel using the MIPS16 instruction
     set but the R2 optimized inline functions in <uapi/asm/swab.h> are
     implemented using 32-bit wide instructions which is invalid.

   - a build error in pgtable-bits.h for a particular kernel
     configuration.

   - accessing registers of the CM GCR might have been compiled to use
     64 bit accesses but these registers are onl 32 bit wide.

  And also a few new bits:

   - move the ATH79 GPIO driver to drivers/gpio

   - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h,
     change ATH79 accordingly.

   - fix definition of pgprot_writecombine

   - add an implementation of dma_map_ops.mmap

   - fix alignment of quiet build output for vmlinuz link

   - BCM47xx: Use kmemdup rather than duplicating its implementation

   - Netlogic: Fix 0x0x prefixes of constants.

   - merge Bjorn Helgaas' series to remove most of the weak keywords
     from function declarations.

   - CP0 and CP1 registers are best considered treated as unsigned
     values to avoid large values from becoming negative values.

   - improve support for the MIPS GIC timer.

   - enable common clock framework for Malta and SEAD3.

   - a number of improvments and fixes to dump_tlb().

   - document the MIPS TLB dump functionality in Magic SysRq.

   - Cavium Octeon CN68XX improvments.

   - NetLogic improvments.

   - irq: Use access helper irq_data_get_affinity_mask.

   - handle MSA unaligned accesses.

   - a number of R6-related math-emu fixes.

   - support for I6400.

   - improvments to MSA support.

   - add uprobes support.

   - move from deprecated __initcall to arch_initcall.

   - remove finish_arch_switch().

   - IRQ cleanups by Thomas Gleixner.

   - migrate to new 'set-state' interface.

   - random small cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits)
  MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16.
  MIPS: Fix alignment of quiet build output for vmlinuz link
  MIPS: math-emu: Remove unused handle_dsemul function declaration
  MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
  MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
  MIPS: inst.h: Add new MIPS R6 FPU opcodes
  MIPS: Octeon: Fix management port MII address on Kontron S1901
  MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation
  STAGING: Octeon: Use common helpers for determining interface and port
  MIPS: Octeon: Support interfaces 4 and 5
  MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports
  MIPS: Octeon: Initialize CN68XX PKO
  STAGING: Octeon: Support CN68XX style WQE
  ...
2015-09-03 16:55:55 -07:00
Alban Bedel 832f5dacfa MIPS: Remove all the uses of custom gpio.h
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS
machines, and each machine type provides its own gpio.h. However
only a handful really implement the GPIO API, most just forward
everythings to gpiolib.

The Alchemy machine is notable as it provides a system to allow
implementing the GPIO API at the board level. But it is not used by
any board currently supported, so it can also be removed.

For most machine types we can just remove the custom gpio.h, as well
as the custom wrappers if some exists. Some of the code found in
the wrappers must be moved to the respective GPIO driver.

A few more fixes are need in some drivers as they rely on linux/gpio.h
to provides some machine specific definitions, or used asm/gpio.h
instead of linux/gpio.h for the gpio API.

Signed-off-by: Alban Bedel <albeu@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Daniel Walter <dwalter@google.com>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Varka Bhadram <varkabhadram@gmail.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Michael Buesch <m@bues.ch>
Cc: abdoulaye berthe <berthe.ab@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: netdev@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10828/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:02 +02:00
Linus Torvalds 2dc7e555e3 Merge branch 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
 "Nothing interesting.  A couple device specific minor updates and a
  kernel doc change"

* 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: pata_arasam_cf: Use devm_clk_get
  libata: fix libata-core.c kernel-doc warning
  ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
2015-09-02 08:00:54 -07:00
Linus Torvalds 26f8b7edc9 PCI changes for the v4.3 merge window:
Enumeration
     Allocate ATS struct during enumeration (Bjorn Helgaas)
     Embed ATS info directly into struct pci_dev (Bjorn Helgaas)
     Reduce size of ATS structure elements (Bjorn Helgaas)
     Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas)
     iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas)
     Move MPS configuration check to pci_configure_device() (Bjorn Helgaas)
     Set MPS to match upstream bridge (Keith Busch)
     ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri)
     Add pci_scan_root_bus_msi() (Lorenzo Pieralisi)
     ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi)
 
   Resource management
     Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi)
 
   PCI device hotplug
     pciehp: Remove unused interrupt events (Bjorn Helgaas)
     pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas)
     pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson)
     pciehp: Simplify pcie_poll_cmd() (Yijing Wang)
     Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang)
     Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang)
     Hold pci_slot_mutex while searching bus->slots list (Yijing Wang)
 
   Power management
     Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui)
 
   Virtualization
     Add ACS quirks for Intel I219-LM/V (Alex Williamson)
     Restore ACS configuration as part of pci_restore_state() (Alexander Duyck)
 
   MSI
     Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
     x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
     Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu)
     Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu)
     ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi)
     Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi)
 
   Generic host bridge driver
     Remove dependency on ARM-specific struct hw_pci (Jayachandran C)
     Build setup-irq.o for arm64 (Jayachandran C)
     Add arm64 support (Jayachandran C)
 
   APM X-Gene host bridge driver
     Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang)
     Add support for a 64-bit prefetchable memory window (Duc Dang)
     Drop owner assignment from platform_driver (Krzysztof Kozlowski)
 
   Broadcom iProc host bridge driver
     Allow BCMA bus driver to be built as module (Hauke Mehrtens)
     Delete unnecessary checks before phy calls (Markus Elfring)
     Add arm64 support (Ray Jui)
 
   Synopsys DesignWare host bridge driver
     Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri)
 
   TI DRA7xx host bridge driver
     Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I)
     Add PM support (Kishon Vijay Abraham I)
     Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I)
     Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I)
 
   Xilinx AXI host bridge driver
     Check for MSI interrupt flag before handling as INTx (Russell Joyce)
 
   Miscellaneous
     Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa)
     Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas)
     Fix generic NCR 53c810 class code quirk (Bjorn Helgaas)
     Fix TI816X class code quirk (Bjorn Helgaas)
     Remove unused "pci_probe" flags (Bjorn Helgaas)
     Host bridge driver code simplifications (Fabio Estevam)
     Add dev_flags bit to access VPD through function 0 (Mark Rustad)
     Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad)
     Kill off set_irq_flags() usage (Rob Herring)
     Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar)
     Clean up pci_find_capability() (Wei Yang)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5FE/AAoJEFmIoMA60/r8I2QP/R9b9MrvH2i9tN98/lTDl7g3
 czE58ZM1d4kMYtW3Pm/DrYI6y6RprAaB4ZEp5rHxlFLqBPZEQwWodA19NkjECcb6
 g5qKWOdIWA4T6Jaab6a/yCmAFa0jni7iAmmTYqca9o3Xj7tFovxDxqPSYkh+rer0
 v+1sAr/4HXSiN339KR6teEF3VZqLFp6ewMydQlVS+R7kAOHHYQDqoo9WF6JnIoL5
 PO3Kbmr1WN3fZY3s98yLq1x6XmLrLlmGdJI+2r+KewO4r/05CL6wTVP/oTMi+Eti
 dueseeISlOTcTAUhk87Vap23uJPeB/rJbYoFdCr7+0AkZGe/U/E2dpZm2wyMcCvq
 OrATuFymgzIuJm5uUPsdH4lzsX97U9BcDccracfC38rYnP5u3bqHCjw8HJzANR7p
 VYbFBzc5ZCCUYtQAjyrKt2820AvTFo+Bu+z75IsJO8LQQgv/zGtQQ8grIQeAjH+l
 sAe3xOTwzZnq6Obl4qb/GElHmIGUbQ1X4Dx1mliiijKMKkhYHOA0iFnB/OBILmEZ
 wHzKU8chWcI9lip0aaX8q9i/qovdVUt2+rdo/N40l7YY66x4jkNgQQXZX+FSKk6H
 stTvEBQgK28EKCHDxMsgzTGIqllSyk4DnRMA7ij1hRWqdUbGk7wOPTvm9QSwNDWe
 SokuWzAQD9YeMRGdsYjZ
 =DX1r
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.3 merge window:

  Enumeration:
   - Allocate ATS struct during enumeration (Bjorn Helgaas)
   - Embed ATS info directly into struct pci_dev (Bjorn Helgaas)
   - Reduce size of ATS structure elements (Bjorn Helgaas)
   - Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas)
   - iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas)
   - Move MPS configuration check to pci_configure_device() (Bjorn Helgaas)
   - Set MPS to match upstream bridge (Keith Busch)
   - ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri)
   - Add pci_scan_root_bus_msi() (Lorenzo Pieralisi)
   - ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi)

  Resource management:
   - Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi)

  PCI device hotplug:
   - pciehp: Remove unused interrupt events (Bjorn Helgaas)
   - pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas)
   - pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson)
   - pciehp: Simplify pcie_poll_cmd() (Yijing Wang)
   - Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang)
   - Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang)
   - Hold pci_slot_mutex while searching bus->slots list (Yijing Wang)

  Power management:
   - Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui)

  Virtualization:
   - Add ACS quirks for Intel I219-LM/V (Alex Williamson)
   - Restore ACS configuration as part of pci_restore_state() (Alexander Duyck)

  MSI:
   - Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
   - x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
   - Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu)
   - Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu)
   - ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi)
   - Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi)

  Generic host bridge driver:
   - Remove dependency on ARM-specific struct hw_pci (Jayachandran C)
   - Build setup-irq.o for arm64 (Jayachandran C)
   - Add arm64 support (Jayachandran C)

  APM X-Gene host bridge driver:
   - Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang)
   - Add support for a 64-bit prefetchable memory window (Duc Dang)
   - Drop owner assignment from platform_driver (Krzysztof Kozlowski)

  Broadcom iProc host bridge driver:
   - Allow BCMA bus driver to be built as module (Hauke Mehrtens)
   - Delete unnecessary checks before phy calls (Markus Elfring)
   - Add arm64 support (Ray Jui)

  Synopsys DesignWare host bridge driver:
   - Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri)

  TI DRA7xx host bridge driver:
   - Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I)
   - Add PM support (Kishon Vijay Abraham I)
   - Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I)
   - Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I)

  Xilinx AXI host bridge driver:
   - Check for MSI interrupt flag before handling as INTx (Russell Joyce)

  Miscellaneous:
   - Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa)
   - Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas)
   - Fix generic NCR 53c810 class code quirk (Bjorn Helgaas)
   - Fix TI816X class code quirk (Bjorn Helgaas)
   - Remove unused "pci_probe" flags (Bjorn Helgaas)
   - Host bridge driver code simplifications (Fabio Estevam)
   - Add dev_flags bit to access VPD through function 0 (Mark Rustad)
   - Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad)
   - Kill off set_irq_flags() usage (Rob Herring)
   - Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar)
   - Clean up pci_find_capability() (Wei Yang)"

* tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits)
  PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
  PCI: Set MPS to match upstream bridge
  PCI: Move MPS configuration check to pci_configure_device()
  PCI: Drop references acquired by of_parse_phandle()
  PCI/MSI: Remove unused pcibios_msi_controller() hook
  ARM/PCI: Remove msi_controller from struct pci_sys_data
  ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi()
  PCI: Add pci_scan_root_bus_msi()
  ARM/PCI: Replace panic with WARN messages on failures
  PCI: generic: Add arm64 support
  PCI: Build setup-irq.o for arm64
  PCI: generic: Remove dependency on ARM-specific struct hw_pci
  PCI: imx6: Simplify a trivial if-return sequence
  PCI: spear: Use BUG_ON() instead of condition followed by BUG()
  PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE()
  PCI: Remove pci_ats_enabled()
  PCI: Stop caching ATS Invalidate Queue Depth
  PCI: Move ATS declarations to linux/pci.h so they're all together
  PCI: Clean up ATS error handling
  PCI: Use pci_physfn() rather than looking up physfn by hand
  ...
2015-08-31 17:14:39 -07:00
Linus Torvalds 5e7fec290e Merge branch 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixlet from Tejun Heo:
 "Simple blacklist entry addition"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  Add factory recertified Crucial M500s to blacklist
2015-08-28 12:02:51 -07:00
Guillermo A. Amaral 7a7184b01a Add factory recertified Crucial M500s to blacklist
The Crucial M500 is known to have issues with queued TRIM commands, the
factory recertified SSDs use a different model number naming convention
which causes them to get ignored by the blacklist.

The new naming convention boils down to: s/Crucial_/FC/

Signed-off-by: Guillermo A. Amaral <g@maral.me>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-08-26 11:30:47 -04:00
Zhang Rui 91f15fb30c PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at
function 1 doesn't work if it is powered on before the SATA controller at
function 0.  The result is that PATA doesn't work after resume, and we
print messages like this:

  pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3
  irq 17: nobody cared (try booting with the "irqpoll" option)

Async resume was introduced in v3.15 by 76569faa62 ("PM / sleep:
Asynchronous threads for resume_noirq").  Prior to that, we powered on
the functions in order, so this problem shouldn't happen.

e6b7e41cdd ("ata: Disabling the async PM for JMicron chip 363/361")
solved the problem for JMicron 361 and 363 devices.  With async suspend
disabled, we always power on function 0 before function 1.

Barto then reported the same problem with a JMicron 368 (see comment #57 in
the bugzilla).

Rather than extending the blacklist piecemeal, disable async suspend for
all JMicron multi-function SATA/PATA/AHCI devices.

This quirk could stay in the ahci and pata_jmicron drivers, but it's likely
the problem will occur even if pata_jmicron isn't loaded until after the
suspend/resume.  Making it a PCI quirk ensures that we'll preserve the
power-on order even if the drivers aren't loaded.

[bhelgaas: changelog, limit to multi-function, limit to IDE/ATA]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551
Reported-and-tested-by: Barto <mister.freeman@laposte.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.15+
2015-08-24 15:27:11 -05:00
Vaishali Thakkar d6e9b704d9 ata: pata_arasam_cf: Use devm_clk_get
This patch introduces the use of managed resource function
devm_clk_get instead of clk_get and removes corresponding call
to clk_put in the remove function.

To be compatible with the change various gotos are replaced with
direct returns, and unneeded label is dropped.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-22 09:36:06 -07:00
Linus Torvalds 4e7fca0d0a Merge branch 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "Three minor device-specific fixes and revert of NCQ autosense added
  during this -rc1.

  It turned out that NCQ autosense as currently implemented interferes
  with the usual error handling behavior.  It will be revisited in the
  near future"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  sata_sx4: Check return code from pdc20621_i2c_read()
  Revert "libata: Implement NCQ autosense"
  Revert "libata: Implement support for sense data reporting"
  Revert "libata-eh: Set 'information' field for autosense"
  ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
2015-08-17 16:20:45 -07:00
Randy Dunlap 38755e897e libata: fix libata-core.c kernel-doc warning
Fix kernel-doc warning in libata-core.c:

Warning(..//drivers/ata/libata-core.c:4763): No description found for parameter 'tag'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-10 11:43:40 -04:00
Axel Lin f9114d3578 ata: ahci_brcmstb: Fix misuse of IS_ENABLED
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not
for other symbols such as __BIG_ENDIAN that is provided directly by
the compiler.

Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-08-06 14:30:07 -04:00
Tomer Barletz bb44e154e2 sata_sx4: Check return code from pdc20621_i2c_read()
The variable spd0 might be used uninitialized when pdc20621_i2c_read()
fails.  This also generates a compilation warning with gcc 5.1.

tj: use pr_err()

Signed-off-by: Tomer Barletz <barletz@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-08-06 12:38:14 -04:00
Tejun Heo 74a80d67b8 Revert "libata: Implement NCQ autosense"
This reverts commit 42b966fbf3.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org #v4.1+
2015-08-03 12:01:54 -04:00
Tejun Heo 84ded2f8e7 Revert "libata: Implement support for sense data reporting"
This reverts commit fe7173c206.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by
later changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org #v4.1+
2015-08-03 12:01:19 -04:00
Tejun Heo fe16d4f202 Revert "libata-eh: Set 'information' field for autosense"
This reverts commit a1524f226a.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org #v4.1+
2015-08-03 11:41:33 -04:00
Florian Fainelli 8b34fe593e ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
When CONFIG_PM_SLEEP is disabled, brcm_ahci_{suspend,resume} are not
used, which causes such a build warning to occur:

  CC      drivers/ata/ahci_brcmstb.o
drivers/ata/ahci_brcmstb.c:212:12: warning: 'brcm_ahci_suspend' defined
but not used [-Wunused-function]
 static int brcm_ahci_suspend(struct device *dev)
            ^
drivers/ata/ahci_brcmstb.c:224:12: warning: 'brcm_ahci_resume' defined
but not used [-Wunused-function]
 static int brcm_ahci_resume(struct device *dev)
            ^
  LD      drivers/ata/built-in.o

Fixes: 766a2d9796 ("ata: add Broadcom AHCI SATA3 driver for STB chips")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-07-28 14:02:13 -04:00
Linus Torvalds 9fbf075c96 Merge branch 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "A couple important fixes.

   - A block layer change which removed restriction on max transfer size
     led to silent data corruption on some devices.  A new quirk is
     added to restore the old size limit for the reported device.  If it
     gets reported on more devices, we might have to consider restoring
     the restriction for ATA devices by default.

   - There finally is a SSD which is confirmed to cause data corruption
     on TRIM regardless of which flavor is used.  A new quirk is added
     and the device is blacklisted

   - Other device-specific workarounds"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Do not blacklist M510DC
  libata: increase the timeout when setting transfer mode
  libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  libata: force disable trim for SuperSSpeed S238
  libata: add ATA_HORKAGE_NOTRIM
  libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
  ata: pmp: add quirk for Marvell 4140 SATA PMP
2015-07-24 16:54:59 -07:00
Viresh Kumar da89947b47 Update Viresh Kumar's email address
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Martin K. Petersen 9051bd393c libata: Do not blacklist M510DC
A new Micron drive was just announced, once again recycling the first
part of the model string. Add an underscore to the M510/M550 pattern to
avoid picking up the new DC drive.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-07-16 12:15:45 -04:00
Mikulas Patocka d531be2ca2 libata: increase the timeout when setting transfer mode
I have a ST4000DM000 disk. If Linux is booted while the disk is spun down,
the command that sets transfer mode causes the disk to spin up. The
spin-up takes longer than the default 5s timeout, so the command fails and
timeout is reported.

Fix this by increasing the timeout to 15s, which is enough for the disk to
spin up.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-07-15 11:56:40 -04:00
David Milburn af34d63763 libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e),
data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family)
SATA controller. This patch will allow the driver to limit max_sectors as before

 # cat /sys/block/sdb/queue/max_sectors_kb
 512

I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2
before seeing corruption, but seems safer to use previous limit. Without this
patch max_sectors_kb will be 32767.

tj: Minor comment update.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.19 and later
Fixes: 34b48db66e ("block: remove artifical max_hw_sectors cap")
2015-07-15 11:47:24 -04:00
Arne Fitzenreiter cda57b1b05 libata: force disable trim for SuperSSpeed S238
This device loses blocks, often the partition table area, on trim.
Disable TRIM.
http://pcengines.ch/msata16a.htm

Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-07-15 11:22:35 -04:00
Arne Fitzenreiter 71d126fd28 libata: add ATA_HORKAGE_NOTRIM
Some devices lose data on TRIM whether queued or not.  This patch adds
a horkage to disable TRIM.

tj: Collapsed unnecessary if() nesting.

Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-07-15 11:22:35 -04:00
Aleksei Mamlin 08c85d2a59 libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
Enabling AA on HP 250GB SATA disk VB0250EAVER causes errors:

[    3.788362] ata3.00: failed to enable AA (error_mask=0x1)
[    3.789243] ata3.00: failed to enable AA (error_mask=0x1)

Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk.

tj: Collected FPDMA_AA entries and updated comment.

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-07-14 17:57:10 -04:00
Lior Amsalem 945b47441d ata: pmp: add quirk for Marvell 4140 SATA PMP
This commit adds the necessary quirk to make the Marvell 4140 SATA PMP
work properly. This PMP doesn't like SRST on port number 4 (the host
port) so this commit marks this port as not supporting SRST.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-07-14 17:46:38 -04:00
Geert Uytterhoeven 5dbc247c2a ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
Since commit a483dcbfa2 ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-07-14 17:38:43 -04:00
Suthikulpanit, Suravee 2051e92486 ata: ahci_platform: Add ACPI _CLS matching
This patch adds ACPI supports for AHCI platform driver, which uses _CLS
method to match the device.

The following is an example of ASL structure in DSDT for a SATA controller,
which contains _CLS package to be matched by the ahci_platform driver:

  Device (AHC0) // AHCI Controller
  {
    Name(_HID, "AMDI0600")
    Name (_CCA, 1)
    Name (_CLS, Package (3)
    {
      0x01, // Base Class: Mass Storage
      0x06, // Sub-Class: serial ATA
      0x01, // Interface: AHCI
    })
    Name (_CRS, ResourceTemplate ()
    {
      Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000)
      Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 }
    })
  }

Also, since ATA driver should not require PCI support for ATA_ACPI,
this patch removes dependency in the driver/ata/Kconfig.

Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-07 01:55:21 +02:00
Linus Torvalds c11d716218 ARM: SoC cleanups for v4.2
A relatively small setup of cleanups this time around, and similar to last time
 the bulk of it is removal of legacy board support:
 
 - OMAP: removal of legacy (non-DT) booting for several platforms
 - i.MX: remove some legacy board files
 
 Conflicts: None
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RJAAoJEFk3GJrT+8ZlS78P/28n9U/KBoBkHWFhLmsgAUC/
 X06CfjxcFuRndLoj96jxhWdaf65GwFsDPCsWfI270X7kYlu08dn2AlLOOHxNf1Ou
 DvfqXz8dBl3z8pg0VHcZzUaV9CwfbvIHbalD2rLQ26sF6vRfHrF7AC+ITTi2TEpY
 CMX7LF1igX8nnRRZpl0Oya8Uvr8vsjuuvSq6I2GFav/JhZpYhz19FqbVPtu13Kuw
 +AZrwvgn5KwSxYw6cDjwWgbSBBuZi2m22LJxrs8z/ckRVA0ErpKLD83GZ5DeA+Ii
 m+f0xv/EE59AnfCnlpnZizxeQQ7BSVAZbaSp4GuXgLtg+1zJZP9tsJ8gLGuSLIo4
 TMMcB7K2VQMs4orAEvd0B7QB2WEtu4NDgKmD7k7tSy0uCMqxY/ItYDFVLpLRz9+r
 cnB469H312MJuk+7eH324n62lWhlQ8h1D2zHXMDCo4kvgZg/Qcbl6joj34B6oTqz
 Pa1RoJwrh4CsihDF/2aUt1IOZ+4mm0hhg4gocZEyqvf7Xdya2oFiyoUQCLnPQfbd
 Vvw7JMxnIW9iQbYzu4eHlZin3TK53osmIepj7pnlrmdLcM046fLONDxsg9JovsrS
 +TwHE00DZdAgpH/z1aUo8Ft4xO60FkPK2YcOCUvKZKi3mIHenvZZQo+s28suNni1
 Q1dz9aZWNvaunmRl4EcH
 =0zof
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Kevin Hilman:
 "A relatively small setup of cleanups this time around, and similar to
  last time the bulk of it is removal of legacy board support:

   - OMAP: removal of legacy (non-DT) booting for several platforms

   - i.MX: remove some legacy board files"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: fix EFM32 build breakage caused by cpu_resume_arm
  ARM: 8389/1: Add cpu_resume_arm() for firmwares that resume in ARM state
  ARM: v7 setup function should invalidate L1 cache
  mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c
  ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c
  ARM: OMAP2+: Constify irq_domain_ops
  ARM: OMAP2+: use symbolic defines for console loglevels instead of numbers
  ARM: at91: remove useless Makefile.boot
  ARM: at91: remove at91rm9200_sdramc.h
  ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
  ARM: at91/pm: use the atmel-mc syscon defines
  pcmcia: at91_cf: Use syscon to configure the MC/smc
  ARM: at91: declare the at91rm9200 memory controller as a syscon
  mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  ARM: at91: drop sam9_smc.c
  ata: at91: use syscon to configure the smc
  ARM: ux500: delete static resource defines
  ARM: ux500: rename ux500_map_io
  ARM: ux500: look up PRCMU resource from DT
  ARM: ux500: kill off L2CC static map
  ...
2015-06-26 11:08:27 -07:00
Linus Torvalds 64e22b8685 Merge branch 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - a number of libata core changes to better support NCQ TRIM.

 - ahci now supports MSI-X in single IRQ mode to support a new
   controller which doesn't implement MSI or INTX.

 - ahci now supports edge-triggered IRQ mode to support a new controller
   which for some odd reason did edge-triggered IRQ.

 - the usual controller support additions and changes.

* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (27 commits)
  libata: Do not blacklist Micron M500DC
  ata: ahci_mvebu: add suspend/resume support
  ahci, msix: Fix build error for !PCI_MSI
  ahci: Add support for Cavium's ThunderX host controller
  ahci: Add generic MSI-X support for single interrupts to SATA PCI driver
  libata: finally use __initconst in ata_parse_force_one()
  drivers: ata: add support for Ceva sata host controller
  devicetree:bindings: add devicetree bindings for ceva ahci
  ahci: added support for Freescale AHCI sata
  ahci: Store irq number in struct ahci_host_priv
  ahci: Move interrupt enablement code to a separate function
  Doc: libata: Fix spelling typo found in libata.xml
  ata:sata_nv - Change 1 to true for bool type variable.
  ata: add Broadcom AHCI SATA3 driver for STB chips
  Documentation: devicetree: add Broadcom SATA binding
  libata: Fix regression when the NCQ Send and Receive log page is absent
  ata: hpt366: fix constant cast warning
  ata: ahci_xgene: potential NULL dereference in probe
  ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  ...
2015-06-25 16:49:21 -07:00
Martin K. Petersen 243918be63 libata: Do not blacklist Micron M500DC
Queued TRIM got disabled on Micron M500DC drives thanks to the
"Micron_M500*" pattern we had in place to accommodate the previous
generation of this drive family. Tweak the blacklist entry slightly so
we only disable queued TRIM for the non-DC variants of M500 drives.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-18 14:52:30 -04:00
Thomas Petazzoni d6ecf15814 ata: ahci_mvebu: add suspend/resume support
This commit adds suspend/resume support to the ahci_mvebu driver. The
suspend hook doesn't do anything special despite calling the generic
ahci_platform_suspend_host() function. However, the resume hook has to
restore the MBus windows configuration, as well as the regret option.

Tested on Marvell Armada 388 GP.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-17 14:25:53 -04:00
Robert Richter 34c56932ce ahci, msix: Fix build error for !PCI_MSI
It turned out the irq vector of the msix can be obtained from struct
msix_entry. This makes the lookup function for msi_desc obsolete.

This fixes a build error if PCI_MSI is unset:

 drivers/ata/ahci.c: In function ‘msix_get_desc’:
 drivers/ata/ahci.c:1210:2: error: ‘struct pci_dev’ has no member named ‘msi_list’

Catched by Fengguang's build bot.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-17 14:16:42 -04:00
Robert Richter b7ae128d72 ahci: Add support for Cavium's ThunderX host controller
This patch adds support for Cavium's ThunderX host controller. The
controller resides on the SoC and is a AHCI compatible SATA controller
with one port, compliant with Serial ATA 3.1 and AHCI Revision 1.31.
There can exists multiple SATA controllers on the SoC.

The controller depends on MSI-X support since the PCI ECAM controller
on the SoC does not implement MSI nor lagacy intx interrupt support.
Thus, during device initialization, if MSI fails MSI-X will be used to
enable the device's interrupts.

The controller uses non-standard BAR0 for its register range. The
already existing device lookup (vendor and device id) that is already
implemented for other host controllers is used to change the PCI BAR.

Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-16 16:12:14 -04:00
Robert Richter ee2aad42e4 ahci: Add generic MSI-X support for single interrupts to SATA PCI driver
This patch adds generic MSI-X support for single interrupts to the
SATA PCI driver. MSI-X support is needed for host controller that only
have MSI-X support implemented, but no MSI or intx. This patch only
adds support for single interrupts, multiple per-port MSI-X interrupts
are not yet implemented.

The new implementation still initializes MSIs first. Only if that
fails, the code tries to enable MSI-X. If that fails too, setup is
continued with intx interrupts.

To not break other chips by this generic code change, there are the
following precautions:

 * Interrupt ranges are not enabled at all.

 * Only single interrupt mode is enabled for msix cap devices. Thus,
   only one interrupt will be setup.

 * During the discussion with Tejun we agreed to change the init
   sequence from msix-msi-intx to msi-msix-intx. Thus, if a device
   offers msi and init does not fail, the msix init code will not be
   executed. This is equivalent to current code.

With this, the code only setups single mode msix as a last resort if
msi fails. No interrupt range is enabled at all. Only one interrupt
will be enabled.

tj: comment edits.

Changes of the patch series:

v5:
 * updated patch subject that the patch only implements single IRQ
 * moved Cavium specific code to a separate patch
 * detect Cavium ThunderX device with PCI_CLASS_STORAGE_SATA_AHCI
   instead of vendor/dev id
 * added more comments to the code
 * enable single msix support for all kind of devices (removing strict
   check)
 * rebased onto update libata/for-4.2 with patch 1, 2 applied

v4:
 * removed implementation of ahci_init_intx()
 * improved patch descriptions
 * rebased onto libata/for-4.2

v3:
 * store irq number in struct ahci_host_priv
 * change initialization order from msix-msi-intx to msi-msix-intx
 * improve comments in ahci_init_msix()
 * improve error message in ahci_init_msix()
 * do not enable MSI-X if MSI is actively disabled for the device

v2:
 * determine irq vector from pci_dev->msi_list

Based on a patch from Sunil Goutham <sgoutham@cavium.com>.

Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-16 16:12:13 -04:00
Rasmus Villemoes 0f5f264b38 libata: finally use __initconst in ata_parse_force_one()
Just six days after this FIXME was added seven years ago, Sam Ravnborg
added the missing feature (37c514e3df "Add missing init section
definitions"), though it ended up being called __initconst.

Let's use it; better late than never.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-10 13:45:27 +09:00
Suneel Garapati a73ed35052 drivers: ata: add support for Ceva sata host controller
Adds support for Ceva sata host controller on Xilinx
Zynq UltraScale+ MPSoC.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-10 11:15:17 +09:00
Tang Yuantian 5163fb6254 ahci: added support for Freescale AHCI sata
Freescale introduced QorIQ series SOCs, like ls1021 ls2085, with AHCI
sata support. It complies with the serial ATA 3.0 specification
and the AHCI 1.3 specification.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Yuantian Tang <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-09 14:02:15 +09:00
Linus Torvalds 86579aa470 Merge branch 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "Two driver fixes.  One is for an ahci_mvebu controller config bug and
  the other fixes pata_octeon_cf build issue"

* 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  pata_octeon_cf: fix broken build
  ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
2015-06-08 08:47:08 -07:00
Aaro Koskinen 4710f2facb pata_octeon_cf: fix broken build
MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.

Cc: stable@vger.kernel.org
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-08 18:03:04 +09:00
Robert Richter 21bfd1aa95 ahci: Store irq number in struct ahci_host_priv
Currently, ahci supports only msi and intx. To also support msix the
handling of the irq number need to be changed. The irq number for msix
devices is taken from msi_list instead of pci_dev. Thus, the irq
number of a device needs to be stored in struct ahci_host_priv now.
This allows the host controller to be activated in a generic way.

This change is only intended for ahci drivers. For that reason the irq
number is stored in struct ahci_host_priv used only by ahci drivers.
Thus, the ABI changes only for ahci_host_activate(), but existing ata
drivers (about 50) are unaffected and keep unchanged. All users of
ahci_host_activate() have been updated.

While touching drivers/ata/libahci.c, doing a small code cleanup in
ahci_port_start().

Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-03 01:37:49 -04:00
Robert Richter a1c8231178 ahci: Move interrupt enablement code to a separate function
This patch refactors ahci_init_interrupts() and moves msi code to a
separate function. Need the split since we add msix initialization in
a later patch. The initialization for msix will be done after msi but
before intx.

Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-03 01:37:49 -04:00
Masanari Iida 8485187b5e Doc: libata: Fix spelling typo found in libata.xml
This patch fix a spelling typo found in libata.xml.
It is because libata.xml is generated from comments
in source, I have to fix it in libata-core.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-29 10:42:37 -04:00
Nadav Haklai e96998fc20 ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
According to the Armada 38x datasheet, the window base address
registers value is set in bits [31:4] of the register and corresponds
to the transaction address bits [47:20].

Therefore, the 32bit base address value should be shifted right by
20bits and left by 4bits, resulting in 16 bit shift right.

The bug as not been noticed yet because if the memory available on
the platform is less than 2GB, then the base address is zero.

[gregory.clement@free-electrons.com: add extra-explanation]

Fixes: a3464ed2f1 (ata: ahci_mvebu: new driver for Marvell Armada 380
AHCI interfaces)
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Omri Itach <omrii@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-26 14:46:15 -04:00
Shailendra Verma c13aff3213 ata:sata_nv - Change 1 to true for bool type variable.
The variable swncq_enabled is bool type. Hence initialize it
with true instead of 1.

Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-25 20:06:55 -04:00
Brian Norris 766a2d9796 ata: add Broadcom AHCI SATA3 driver for STB chips
Pretty straightforward driver, using the nice library-ization of the
generic ahci_platform driver.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-24 20:11:25 -04:00
Martin K. Petersen eab6ee1ce3 libata: Fix regression when the NCQ Send and Receive log page is absent
Commit 5d3abf8ff6 ("libata: Fall back to unqueued READ LOG EXT if
the DMA variant fails") allowed us to fall back to the unqueued READ
LOG variant if the queued version failed. However, if the device did
not support the page at all we would end up looping due to a merge
snafu.

Ensure we only take the fallback path once.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-21 17:52:55 -04:00
Arnd Bergmann 6ec0a86c64 ata: hpt366: fix constant cast warning
gcc-5.x warns about a preexisting problem in the hpt36x pata driver:

drivers/ata/pata_hpt366.c: In function 'hpt36x_init_one':
drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]

Other ata drivers have the same problem, as ata_pci_bmdma_init_one
takes a non-const pointer, and they solve it by using a cast to
turn that pointer into a normal non-const pointer.

I also tried to change the ata core code to make host->private_data
a const pointer, but that quickly got out of hand, as some other
drivers expect it to be writable, so I ended up using the same
hack as the others here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-21 17:37:51 -04:00
Alexandre Belloni 5a90f8d3b1 ata: at91: use syscon to configure the smc
Use syscon/regmap to configure the smc. This allows to avoid using
at91sam9_smc.h and to compile the driver in a multiplatform configuration.

The driver will still not probe until the proper DT bindings are added. That
binding will include an atmel,smc property that is a phandle to the SMC the CF
controller is connected to.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-20 16:36:50 +02:00
Dan Carpenter 2d32d10103 ata: ahci_xgene: potential NULL dereference in probe
Smatch complains about this potential NULL dereference of "acpi_id".

Fixes: c9802a4be6 ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-18 16:43:23 -04:00
Linus Torvalds b3e5838ac0 Merge branch 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "Rather big for fixes pull.

   - SCC controllers never lived to see the light of the day.  Both
     libata and ide drivers removed.

   - In some configurations, link power management policy changes
     sometimes cause delayed spurious PHY events which can develop into
     noticeable failures.  This has been reported several times over the
     years.  Gabriele's patches suppress PHY events for a while after
     LPM policy changes which should help most of these failures without
     causing too much problem for hotplug use cases.

   - A few controller specific fixes"

[ Hmm.  I don't think removing SSC support is really a "fix", but hey, it
  removes a lot of lines of code.  Which I like.  So ...  good riddance ]

* 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: avoton port-disable reset-quirk
  ata: select DW_DMAC in case of SATA_DWC
  libata: Blacklist queued TRIM on all Samsung 800-series
  libata: Ignore spurious PHY event on LPM policy change
  libata: Add helper to determine when PHY events should be ignored
  ata: ahci_st: fixup layering violations / drvdata errors
  Remove celleb-only SCC PATA drivers
2015-05-11 10:54:20 -07:00
Suman Tripathi c9802a4be6 ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
This patch enables full AHCI feature support for APM X-Gene SoC SATA
host controller. The following errata's are removed:

1. 2a0bdff6b9 ("ahci-xgene: fix the dma state machine lockup for the
                 IDENTIFY DEVICE PIO mode command")
2. 09c32aaa36 ("ahci_xgene: Fix the dma state machine lockup for the
                 ATA_CMD_SMART PIO mode command")
3. 1540035da7 ("ahci_xgene: Implement the xgene_ahci_poll_reg_val to
                 support PMP")
4. a3a84bc7c8 ("ahci_xgene: Implement the workaround to support PMP
                 enumeration and discovery")
5. 1102407bb7 ("ahci_xgene: Fix the DMA state machine lockup for the
                 ATA_CMD_PACKET PIO mode command")
6. 72f79f9e35 ("ahci_xgene: Removing NCQ support from the APM X-Gene
		SoC AHCI SATA Host Controller driver")

In addition, enable PMP support for APM X-Gene SoC and enable FBS
support for second generation APM X-Gene SoC.

Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-11 07:26:48 -04:00
Suman Tripathi 5903b1643f libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
This patch adds the support to handle HOST_IRQ_STAT as edge trigger
latch.

Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-10 11:52:44 -04:00
Suman Tripathi a129db89d8 libahci: Refactoring of ahci_single_irq_intr function.
This patch refactors the ahci_single_irq_intr function and also rename
it to ahci_single_level_irq_intr as it handles a level triggered latch.

Signed-off-by: Suman tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-10 11:52:44 -04:00
Dan Williams dbfe8ef559 ahci: avoton port-disable reset-quirk
Avoton AHCI occasionally sees drive probe timeouts at driver load time.
When this happens SCR_STATUS indicates device detected, but no D2H FIS
reception.  Reset the internal link state machines by bouncing
port-enable in the PCS register when this occurs.

Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-10 11:39:16 -04:00
Andy Shevchenko 11fa7df1e1 ata: select DW_DMAC in case of SATA_DWC
Since sata_dwc_460ex.c was moved to generic DMA driver we have to ensure that
user can still compile it.

Fixes: 8b3444852a (sata_dwc_460ex: move to generic DMA driver)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-05 09:48:45 -04:00
Martin K. Petersen 5d3abf8ff6 libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
Some devices advertise support for the READ/WRITE LOG DMA EXT commands
but fail when we try to issue them. This can lead to queued TRIM being
unintentionally disabled since the relevant feature flag is located in a
general purpose log page.

Fall back to unqueued READ LOG EXT if the DMA variant fails while
reading a log page.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-05 09:30:19 -04:00
Martin K. Petersen f303074160 libata: Expose TRIM capability in sysfs
Create a sysfs "trim" attribute for each ata_device that displays
whether DSM TRIM is "unsupported", "unqueued", "forced_unqueued"
(blacklisted) or "queued".

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-05 09:30:18 -04:00
Martin K. Petersen d7b16e4f62 libata: Allow NCQ TRIM to be enabled or disabled with a module parameter
We have started seeing SSD firmware updates introduce support for queued
TRIM. Sadly, in most cases this support is completely untested and can
lead to either errors or data corruption.

Add two libata force flags that can be used to either enable or disable
queued TRIM support.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-05 09:30:18 -04:00
Martin K. Petersen 9a9324d396 libata: Blacklist queued TRIM on all Samsung 800-series
The queued TRIM problems appear to be generic to Samsung's firmware and
not tied to a particular model. A recent update to the 840 EVO firmware
introduced the same issue as we saw on 850 Pro.

Blacklist queued TRIM on all 800-series drives while we work this issue
with Samsung.

Reported-by: Günter Waller <g.wal@web.de>
Reported-by: Sven Köhler <sven.koehler@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-04 12:25:50 -04:00
Krzysztof Kozlowski 3b6eefc1c9 libata: samsung_cf: Constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-02 22:04:43 -04:00
Gabriele Mazzotta 09c5b4803a libata: Ignore spurious PHY event on LPM policy change
When the LPM policy is set to ATA_LPM_MAX_POWER, the device might
generate a spurious PHY event that cuases errors on the link.
Ignore this event if it occured within 10s after the policy change.

The timeout was chosen observing that on a Dell XPS13 9333 these
spurious events can occur up to roughly 6s after the policy change.

Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-04-25 16:50:14 -04:00
Gabriele Mazzotta 8393b811f3 libata: Add helper to determine when PHY events should be ignored
This is a preparation commit that will allow to add other criteria
according to which PHY events should be dropped.

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-04-25 16:50:14 -04:00
Peter Griffin e0e2674b92 ata: ahci_st: fixup layering violations / drvdata errors
Brian noticed while working on another SATA driver that uses libahci_platform,
an error in this driver; it tries to the the driver data for its
device, while libata also thinks it can set the driver data. See:

  ahci_platform_init_host()
  -> ata_host_alloc_pinfo()
     -> ata_host_alloc()
        -> dev_set_drvdata()

So instead of sticking the IP-specific platform data into drvdata, let's
use the plat_data variable that is reserved for this use.

Addtionally plat_data isn't set until ahci_platform_init_host() has been
called further down in probe(). So re-work the st_ahci_probe_resets and
st_ahci_deassert_resets functions to take ahci_host_priv *hpriv as a
parameter.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Suggested-by: Brian Norris <computersforpeace@gmail.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-20 13:36:38 -04:00
Linus Torvalds d19d5efd8c powerpc updates for 4.1
- Numerous minor fixes, cleanups etc.
 - More EEH work from Gavin to remove its dependency on device_nodes.
 - Memory hotplug implemented entirely in the kernel from Nathan Fontenot.
 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.
 - Rewrite of VPHN parsing logic & tests from Greg Kurz.
 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.
 - Support for pstore on powernv from Hari Bathini.
 - Removal of old powerpc specific byte swap routines by David Gibson.
 - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing
   your firmware when it wasn't.
 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.
 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek.
 - Some fixes for migration from Tyrel Datwyler.
 - A new syscall to switch the cpu endian by Michael Ellerman.
 - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn.
 - A fix for the OPAL sensor driver from Cédric Le Goater.
 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.
 - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per
   machine.
 - Small patch from Sam Bobroff to explicitly abort non-suspended transactions
   on syscalls, plus a test to exercise it.
 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.
 - Small patch to enable the hard lockup detector from Anton Blanchard.
 - Fix from Dave Olson for missing L2 cache information on some CPUs.
 - Some fixes from Michael Ellerman to get Cell machines booting again.
 - Freescale updates from Scott: Highlights include BMan device tree nodes, an
   MSI erratum workaround, a couple minor performance improvements, config
   updates, and misc fixes/cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVL2cxAAoJEFHr6jzI4aWAR8cP/19VTo/CzCE4ffPSx7qR464n
 F+WFZcbNjIMXu6+B0YLuJZEsuWtKKrCit/MCg3+mSgE4iqvxmtI+HDD0445Buszj
 UD4E4HMdPrXQ+KUSUDORvRjv/FFUXIa94LSv/0g2UeMsPz/HeZlhMxEu7AkXw9Nf
 rTxsmRTsOWME85Y/c9ss7XHuWKXT3DJV7fOoK9roSaN3dJAuWTtG3WaKS0nUu0ok
 0M81D6ZczoD6ybwh2DUMPD9K6SGxLdQ4OzQwtW6vWzcQIBDfy5Pdeo0iAFhGPvXf
 T4LLPkv4cF4AwHsAC4rKDPHQNa+oZBoLlScrHClaebAlDiv+XYKNdMogawUObvSh
 h7avKmQr0Ygp1OvvZAaXLhuDJI9FJJ8lf6AOIeULgHsDR9SyKMjZWxRzPe11uarO
 Fyi0qj3oJaQu6LjazZraApu8mo+JBtQuD3z3o5GhLxeFtBBF60JXj6zAXJikufnl
 kk1/BUF10nKUhtKcDX767AMUCtMH3fp5hx8K/z9T5v+pobJB26Wup1bbdT68pNBT
 NjdKUppV6QTjZvCsA6U2/ECu6E9KeIaFtFSL2IRRoiI0dWBN5/5eYn3RGkO2ZFoL
 1NdwKA2XJcchwTPkpSRrUG70sYH0uM2AldNYyaLfjzrQqza7Y6lF699ilxWmCN/H
 OplzJAE5cQ8Am078veTW
 =03Yh
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - Numerous minor fixes, cleanups etc.

 - More EEH work from Gavin to remove its dependency on device_nodes.

 - Memory hotplug implemented entirely in the kernel from Nathan
   Fontenot.

 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.

 - Rewrite of VPHN parsing logic & tests from Greg Kurz.

 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.

 - Support for pstore on powernv from Hari Bathini.

 - Removal of old powerpc specific byte swap routines by David Gibson.

 - Fix from Vasant Hegde to prevent the flash driver telling you it was
   flashing your firmware when it wasn't.

 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.

 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
   Stancek.

 - Some fixes for migration from Tyrel Datwyler.

 - A new syscall to switch the cpu endian by Michael Ellerman.

 - Large series from Wei Yang to implement SRIOV, reviewed and acked by
   Bjorn.

 - A fix for the OPAL sensor driver from Cédric Le Goater.

 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.

 - Large series from Daniel Axtens to make our PCI hooks per PHB rather
   than per machine.

 - Small patch from Sam Bobroff to explicitly abort non-suspended
   transactions on syscalls, plus a test to exercise it.

 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.

 - Small patch to enable the hard lockup detector from Anton Blanchard.

 - Fix from Dave Olson for missing L2 cache information on some CPUs.

 - Some fixes from Michael Ellerman to get Cell machines booting again.

 - Freescale updates from Scott: Highlights include BMan device tree
   nodes, an MSI erratum workaround, a couple minor performance
   improvements, config updates, and misc fixes/cleanup.

* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
  powerpc/powermac: Fix build error seen with powermac smp builds
  powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
  powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
  powerpc/cell: Fix iommu breakage caused by controller_ops change
  powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
  powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
  powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
  powerpc/pseries: Correct memory hotplug locking
  powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
  powerpc: Add ppc64 hard lockup detector support
  oprofile: Disable oprofile NMI timer on ppc64
  powerpc/perf/hv-24x7: Add missing put_cpu_var()
  powerpc/perf/hv-24x7: Break up single_24x7_request
  powerpc/perf/hv-24x7: Define update_event_count()
  powerpc/perf/hv-24x7: Whitespace cleanup
  powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
  powerpc/perf/hv-24x7: Rename hv_24x7_event_update
  powerpc/perf/hv-24x7: Move debug prints to separate function
  powerpc/perf/hv-24x7: Drop event_24x7_request()
  powerpc/perf/hv-24x7: Use pr_devel() to log message
  ...

Conflicts:
	tools/testing/selftests/powerpc/Makefile
	tools/testing/selftests/powerpc/tm/Makefile
2015-04-16 13:53:32 -05:00
Linus Torvalds 2481bc7528 Power management and ACPI updates for v4.1-rc1
- Generic PM domains support update including new PM domain
    callbacks to handle device initialization better (Russell King,
    Rafael J Wysocki, Kevin Hilman).
 
  - Unified device properties API update including a new mechanism
    for accessing data provided by platform initialization code
    (Rafael J Wysocki, Adrian Hunter).
 
  - ARM cpuidle update including ARM32/ARM64 handling consolidation
    (Daniel Lezcano).
 
  - intel_idle update including support for the Silvermont Core in
    the Baytrail SOC and for the Airmont Core in the Cherrytrail and
    Braswell SOCs (Len Brown, Mathias Krause).
 
  - New cpufreq driver for Hisilicon ACPU (Leo Yan).
 
  - intel_pstate update including support for the Knights Landing
    chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi).
 
  - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann).
 
  - powernv cpufreq driver update (Shilpasri G Bhat).
 
  - devfreq update including Tegra support changes (Tomeu Vizoso,
    MyungJoo Ham, Chanwoo Choi).
 
  - powercap RAPL (Running-Average Power Limit) driver update
    including support for Intel Broadwell server chips (Jacob Pan,
    Mathias Krause).
 
  - ACPI device enumeration update related to the handling of the
    special PRP0001 device ID allowing DT-style 'compatible' property
    to be used for ACPI device identification (Rafael J Wysocki).
 
  - ACPI EC driver update including limited _DEP support (Lan Tianyu,
    Lv Zheng).
 
  - ACPI backlight driver update including a new mechanism to allow
    native backlight handling to be forced on non-Windows 8 systems
    and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede).
 
  - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu).
 
  - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
    Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki).
 
  - Fixes related to suspend-to-idle for the iTCO watchdog driver and
    the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu).
 
  - PM tracing support for the suspend phase of system suspend/resume
    transitions (Zhonghui Fu).
 
  - Configurable delay for the system suspend/resume testing facility
    (Brian Norris).
 
  - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVLbO+AAoJEILEb/54YlRx5N4QAJXsmEW1FL2l6mMAyTQkEsVj
 nbqjF9I6aJgYM9+i8GKaZJxpN17SAZ7Ii7aCAXjPwX8AvjT70+gcZr+KDWtPir61
 B75VNVEcUYOR4vOF5Z6rQcQMlhGPkfMOJYXFMahpOG6DdPbVh1x2/tuawfc6IC0V
 a6S/fln6WqHrXQ+8swDSv1KuZsav6+8AQaTlNUQkkuXdY9b3k/3xiy5C2K26APP8
 x1B39iAF810qX6ipnK0gEOC3Vs29dl7hvNmgOVmmkBGVS7+pqTuy5n1/9M12cDRz
 78IQ7DXB0NcSwr5tdrmGVUyH0Q6H9lnD3vO7MJkYwKDh5a/2MiBr2GZc4KHDKDWn
 E1sS27f1Pdn9qnpWLzTcY+yYNV3EEyre56L2fc+sh+Xq9sNOjUah+Y/eAej/IxYD
 XYRf+GAj768yCJgNP+Y3PJES/PRh+0IZ/dn5k0Qq2iYvc8mcObyG6zdQIvCucv/i
 70uV1Z2GWEb31cI9TUV8o5GrMW3D0KI9EsCEEpiFFUnhjNog3AWcerGgFQMHxu7X
 ZnNSzudvek+XJ3NtpbPgTiJAmnMz8bDvBQm3G1LUO2TQdjYTU6YMUHsfzXs8DL6c
 aIMWO4stkVuDtWrlT/hfzIXepliccyXmSP6sbH+zNNCepulXe5C4M2SftaDi4l/B
 uIctXWznvHoGys+EFL+v
 =erd3
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups all over, although there are a few
  items that sort of fall into the new feature category.

  First off, we have new callbacks for PM domains that should help us to
  handle some issues related to device initialization in a better way.

  There also is some consolidation in the unified device properties API
  area allowing us to use that inferface for accessing data coming from
  platform initialization code in addition to firmware-provided data.

  We have some new device/CPU IDs in a few drivers, support for new
  chips and a new cpufreq driver too.

  Specifics:

   - Generic PM domains support update including new PM domain callbacks
     to handle device initialization better (Russell King, Rafael J
     Wysocki, Kevin Hilman)

   - Unified device properties API update including a new mechanism for
     accessing data provided by platform initialization code (Rafael J
     Wysocki, Adrian Hunter)

   - ARM cpuidle update including ARM32/ARM64 handling consolidation
     (Daniel Lezcano)

   - intel_idle update including support for the Silvermont Core in the
     Baytrail SOC and for the Airmont Core in the Cherrytrail and
     Braswell SOCs (Len Brown, Mathias Krause)

   - New cpufreq driver for Hisilicon ACPU (Leo Yan)

   - intel_pstate update including support for the Knights Landing chip
     (Dasaratharaman Chandramouli, Kristen Carlson Accardi)

   - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann)

   - powernv cpufreq driver update (Shilpasri G Bhat)

   - devfreq update including Tegra support changes (Tomeu Vizoso,
     MyungJoo Ham, Chanwoo Choi)

   - powercap RAPL (Running-Average Power Limit) driver update including
     support for Intel Broadwell server chips (Jacob Pan, Mathias Krause)

   - ACPI device enumeration update related to the handling of the
     special PRP0001 device ID allowing DT-style 'compatible' property
     to be used for ACPI device identification (Rafael J Wysocki)

   - ACPI EC driver update including limited _DEP support (Lan Tianyu,
     Lv Zheng)

   - ACPI backlight driver update including a new mechanism to allow
     native backlight handling to be forced on non-Windows 8 systems and
     a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede)

   - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu)

   - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
     Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki)

   - Fixes related to suspend-to-idle for the iTCO watchdog driver and
     the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu)

   - PM tracing support for the suspend phase of system suspend/resume
     transitions (Zhonghui Fu)

   - Configurable delay for the system suspend/resume testing facility
     (Brian Norris)

   - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)"

* tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
  ACPI / scan: Rework modalias creation when "compatible" is present
  intel_idle: mark cpu id array as __initconst
  powercap / RAPL: mark rapl_ids array as __initconst
  powercap / RAPL: add ID for Broadwell server
  intel_pstate: Knights Landing support
  intel_pstate: remove MSR test
  cpufreq: fix qoriq uniprocessor build
  ACPI / scan: Take the PRP0001 position in the list of IDs into account
  ACPI / scan: Simplify acpi_match_device()
  ACPI / scan: Generalize of_compatible matching
  device property: Introduce firmware node type for platform data
  device property: Make it possible to use secondary firmware nodes
  PM / watchdog: iTCO: stop watchdog during system suspend
  cpufreq: hisilicon: add acpu driver
  ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler
  cpufreq: powernv: Report cpu frequency throttling
  intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
  intel_idle: Update support for Silvermont Core in Baytrail SOC
  PM / devfreq: tegra: Register governor on module init
  ...
2015-04-14 20:21:54 -07:00
Daniel Axtens 5df07b74f6 Remove celleb-only SCC PATA drivers
The SCC PATA interface is only used by celleb.
celleb has been dropped [1], so drop the drivers.

[1] http://patchwork.ozlabs.org/patch/451730/

CC: "David S. Miller" <davem@davemloft.net>
CC: linux-ide@vger.kernel.org
CC: Valentin Rothberg <valentinrothberg@gmail.com>
CC: mpe@ellerman.id.au
CC: linuxppc-dev@lists.ozlab.org
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-14 13:07:17 -04:00
Linus Torvalds a1480a166d Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - Hannes's patchset implements support for better error reporting
   introduced by the new ATA command spec.

 - the deperecated pci_ dma API usages have been replaced by dma_ ones.

 - a bunch of hardware specific updates and some cleanups.

* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: remove deprecated use of pci api
  ahci: st: st_configure_oob must be called after IP is clocked.
  ahci: st: Update the ahci_st DT documentation
  ahci: st: Update the DT example for how to obtain the PHY.
  sata_dwc_460ex: indent an if statement
  libata: Add tracepoints
  libata-eh: Set 'information' field for autosense
  libata: Implement support for sense data reporting
  libata: Implement NCQ autosense
  libata: use status bit definitions in ata_dump_status()
  ide,ata: Rename ATA_IDX to ATA_SENSE
  libata: whitespace fixes in ata_to_sense_error()
  libata: whitespace cleanup in ata_get_cmd_descript()
  libata: use READ_LOG_DMA_EXT
  libata: remove ATA_FLAG_LOWTAG
  sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
  sata_dwc_460ex: move to generic DMA driver
  sata_dwc_460ex: join messages back
  sata: xgene: add ACPI support for APM X-Gene SATA ports
  ata: sata_mv: add proper definitions for LP_PHY_CTL register values
2015-04-13 16:42:16 -07:00
Rafael J. Wysocki 17528b31c5 Merge branch 'pnp'
* pnp:
  PNP: Avoid leaving unregistered device objects in lists
  PNP: Convert pnp_lock into a mutex
  PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driver
  PNP: platform/x86/apple-gmux: Use module_pnp_driver to register driver
  PNP: net/sb1000: Use module_pnp_driver to register driver
  PNP: media/rc: Use module_pnp_driver to register driver
  PNP: ide/ide-pnp: Use module_pnp_driver to register driver
  PNP: ata/pata_isapnp: Use module_pnp_driver to register driver
  PNP: tpm/tpm_infineon: Use module_pnp_driver to register driver
  PNP: Add helper macro for pnp_register_driver boilerplate
  PNP / ACPI: Use ACPI_COMPANION_SET() during initialization
2015-04-13 00:36:15 +02:00
Quentin Lambert c54c719b55 ata: remove deprecated use of pci api
Replace occurences of the pci api by appropriate call to the dma api.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@deprecated@
idexpression id;
position p;
@@

(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
   when != pci_get_drvdata ( id )
   when != pci_enable_device ( id )
(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@

(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_ATOMIC
  )
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_ATOMIC
  )
)

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-08 10:55:05 -04:00
Michael Ellerman b7f859dda9 Merge branch 'next-remove-ldst' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into next 2015-04-07 13:25:14 +10:00
Peter Griffin 9a1e75e11a ahci: st: st_configure_oob must be called after IP is clocked.
Currently the ahci_st driver will hang the system on probe, as the
st_configure_oob function does some register writes before the IP
is clocked. This patch moves the function call to after
ahci_platform_enable_resources (which enables the IP clock), and
resolves the hang.

Addtionally st_ahci_configure_oob should be called in the st_ahci_resume
function, so we also rectify that ensuring it is also called after
the IP clock has been enabled.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-01 12:07:19 -04:00