Change action API to assume that action init function always takes
reference to action, even when overwriting existing action. This is
necessary because action API continues to use action pointer after init
function is done. At this point action becomes accessible for concurrent
modifications, so user must always hold reference to it.
Implement helper put list function to atomically release list of actions
after action API init code is done using them.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return from action init function with reference to action taken,
even when overwriting existing action.
Action init API initializes its fourth argument (pointer to pointer to tc
action) to either existing action with same index or newly created action.
In case of existing index(and bind argument is zero), init function returns
without incrementing action reference counter. Caller of action init then
proceeds working with action, without actually holding reference to it.
This means that action could be deleted concurrently.
Change action init behavior to always take reference to action before
returning successfully, in order to protect from concurrent deletion.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement helper delete function that uses new action ops 'delete', instead
of destroying action directly. This is required so act API could delete
actions by index, without holding any references to action that is being
deleted.
Implement function __tcf_action_put() that releases reference to action and
frees it, if necessary. Refactor action deletion code to use new put
function and not to rely on rtnl lock. Remove rtnl lock assertions that are
no longer needed.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend action ops with 'delete' function. Each action type to implements
its own delete function that doesn't depend on rtnl lock.
Implement delete function that is required to delete actions without
holding rtnl lock. Use action API function that atomically deletes action
only if it is still in action idr. This implementation prevents concurrent
threads from deleting same action twice.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new action API function that atomically finds and deletes action
from idr by index. Intended to be used by lockless actions that do not rely
on rtnl lock.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without rtnl lock protection it is no longer safe to use pointer to tc
action without holding reference to it. (it can be destroyed concurrently)
Remove unsafe action idr lookup function. Instead of it, implement safe tcf
idr check function that atomically looks up action in idr and increments
its reference and bind counters. Implement both action search and check
using new safe function
Reference taken by idr check is temporal and should not be accounted by
userspace clients (both logically and to preserver current API behavior).
Subtract temporal reference when dumping action to userspace using existing
tca_get_fill function arguments.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add additional 'rtnl_held' argument to act API init functions. It is
required to implement actions that need to release rtnl lock before loading
kernel module and reacquire if afterwards.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change type of action reference counter to refcount_t.
Change type of action bind counter to atomic_t.
This type is used to allow decrementing bind counter without testing
for 0 result.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement functions to atomically update and free action cookie
using rcu mechanism.
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'clone' action to kernel datapath by using existing functions.
When actions within clone don't modify the current flow, the flow
key is not cloned before executing clone actions.
This is a follow up patch for this incomplete work:
https://patchwork.ozlabs.org/patch/722096/
v1 -> v2:
Refactor as advised by reviewer.
Signed-off-by: Yifeng Sun <pkusunyifeng@gmail.com>
Signed-off-by: Andy Zhou <azhou@ovn.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build warnings in drivers/isdn/capi/ when CONFIG_PROC_FS is not
enabled by marking the unused functions as __maybe_unused.
../drivers/isdn/capi/capi.c:1324:12: warning: 'capi20_proc_show' defined but not used [-Wunused-function]
../drivers/isdn/capi/capi.c:1347:12: warning: 'capi20ncci_proc_show' defined but not used [-Wunused-function]
../drivers/isdn/capi/capidrv.c:2454:12: warning: 'capidrv_proc_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: isdn4linux@listserv.isdn4linux.de (subscribers-only)
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a build warning in connector.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.
../drivers/connector/connector.c:242:12: warning: 'cn_proc_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable next_rx is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'next_rx' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk says:
====================
allow PTP 224.0.0.107 to be timestamped
Allows packets with 224.0.0.107 mcas address for PTP packets to be timestamped.
Only for cpsw version > v1.15.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested on AM572x with cpsw v1.15 for PTP sync and delay_req messages.
It doesn't work on cpsw v1.12, so added only for cpsw v > 1.15.
Command for testing:
ptp4l -P -4 -H -i eth0 -l 6 -m -q -p /dev/ptp0 -f ptp.cfg
where ptp.cfg:
[global]
tx_timestamp_timeout 20
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's needed to avoid checkpatch warnings for farther changes.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I link error on 32-bit ARM points to yet another arithmetic bug:
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.o: In function `tc_setup_cbs':
stmmac_tc.c:(.text+0x148): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x1fc): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x308): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x320): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x33c): undefined reference to `__aeabi_uldivmod'
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.o:stmmac_tc.c:(.text+0x3a4): more undefined references to `__aeabi_uldivmod' follow
I observe that the last change to add the 'ul' prefix was incorrect,
as it did not turn the result of the multiplication into a 64-bit
expression on 32-bit architectures. Further, it seems that the
do_div() macro gets confused by the fact that we pass a signed
variable rather than unsigned into it.
This changes the code to instead use the div_s64() helper that is
meant for signed division, along with changing the constant suffix
to 'll' to actually make it a 64-bit argument everywhere, fixing
both of the issues I pointed out.
I'm not completely convinced that this makes the code correct, but
I'm fairly sure that we have two problems less than before.
Fixes: 1f705bc61a ("net: stmmac: Add support for CBS QDISC")
Fixes: c18a9c0966 ("net: stmmac_tc: use 64-bit arithmetic instead of 32-bit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently a link is declared stale and reset if there has been 100
repeated attempts to retransmit the same packet. However, in certain
infrastructures we see that packet (NACK) duplicates and delays may
cause such retransmit attempts to occur at a high rate, so that the
peer doesn't have a reasonable chance to acknowledge the reception
before the 100-limit is hit. This may take much less than the
stipulated link tolerance time, and despite that probe/probe replies
otherwise go through as normal.
We now extend the criteria for link reset to also being time based.
I.e., we don't reset the link until the link tolerance time is passed
AND we have made 100 retransmissions attempts.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianbo Liu says:
====================
Introduce matching on double vlan/QinQ headers for TC flower
Currently TC flower supports only one vlan tag, it doesn't match on both outer
and inner vlan headers for QinQ. To do this, we add support to get both outer
and inner vlan headers for flow dissector, and then TC flower do matching on
those information.
We also plan to extend TC command to support this feature. We add new
cvlan_id/cvlan_prio/cvlan_ethtype keywords for inner vlan header. The existing
vlan_id/vlan_prio/vlan_ethtype are for outer vlan header, and vlan_ethtype must
be 802.1q or 802.1ad.
The examples for command and output are as the following.
flower vlan_id 1000 vlan_ethtype 802.1q \
cvlan_id 100 cvlan_ethtype ipv4 \
action vlan pop \
action vlan pop \
action mirred egress redirect dev ens1f1_0
filter protocol 802.1ad pref 33 flower chain 0
filter protocol 802.1ad pref 33 flower chain 0 handle 0x1
vlan_id 1000
vlan_ethtype 802.1Q
cvlan_id 100
cvlan_ethtype ip
eth_type ipv4
in_hw
...
v2:
fix sparse warning.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As support dissecting of QinQ inner and outer vlan headers, user can
add rules to match on QinQ vlan headers.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the encapsulated ethertype is not dumped as it's the same as
TCA_FLOWER_KEY_ETH_TYPE keyvalue. But the dumping result is inconsistent
with input, we add dumping it with TCA_FLOWER_KEY_VLAN_ETH_TYPE.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dissect the QinQ packets to get both outer and inner vlan information,
then store to the extended flow keys.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As flow dissector stores vlan ethertype, tc flower now can match on that.
It is to make preparation for supporting QinQ.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change vlan dissector key to save vlan tpid to support both 802.1Q
and 802.1AD ethertype.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable txq_length is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'txq_length' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
Add a mlxsw-specific test for mirror-to-gretap
Some configurations of mirror-to-gretap are impossible for mlxsw to
offload. Add a test that checks that these out-of-domain conditions are
handled properly by mlxsw.
In patch #1, fix mirror_gre_lib.sh and mirror_gre_topo_lib.sh so that
they can be imported from directories other than forwarding/.
In patch #2, add a test to check handling of several scenarios that
mlxsw is expected to fail to offload.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test several aspects of offloading mirror to gretap and ip6gretap
netdevices that are specific to mlxsw, such as requirements for TTL and
TOS values.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The next patch introduces a new mlxsw-specific test that uses
mirror_gre_lib.sh and mirror_gre_topo_lib.sh.
However when sourcing their own deps, these libraries assume that the
test that's running is in the same directory. That's not the case for
driver-specific tests.
So change the libraries to source their deps through $relative_path.
That variable is set up by lib.sh, which should be imported by the test
in question in any case.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu says:
====================
vxlan: fix default fdb entry user-space notify ordering/race
Problem:
In vxlan_newlink, a default fdb entry is added before register_netdev.
The default fdb creation function notifies user-space of the
fdb entry on the vxlan device which user-space does not know about yet.
(RTM_NEWNEIGH goes before RTM_NEWLINK for the same ifindex).
This series fixes the user-space netlink notification ordering issue
with the following changes:
- decouple fdb notify from fdb create.
- Move fdb notify after register_netdev.
- modify rtnl_configure_link to allow configuring a link early.
- Call rtnl_configure_link in vxlan newlink handler to notify
userspace about the newlink before fdb notify and
hence avoiding the user-space race.
====================
Fixes: afbd8bae9c ("vxlan: add implicit fdb entry for default destination")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Problem:
In vxlan_newlink, a default fdb entry is added before register_netdev.
The default fdb creation function also notifies user-space of the
fdb entry on the vxlan device which user-space does not know about yet.
(RTM_NEWNEIGH goes before RTM_NEWLINK for the same ifindex).
This patch fixes the user-space netlink notification ordering issue
with the following changes:
- decouple fdb notify from fdb create.
- Move fdb notify after register_netdev.
- Call rtnl_configure_link in vxlan newlink handler to notify
userspace about the newlink before fdb notify and
hence avoiding the user-space race.
Fixes: afbd8bae9c ("vxlan: add implicit fdb entry for default destination")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new option do_notify to vxlan_fdb_destroy to make
sending netlink notify optional. Used by a later patch.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add new vxlan_fdb_alloc helper
- rename existing vxlan_fdb_create into vxlan_fdb_update:
because it really creates or updates an existing
fdb entry
- move new fdb creation into a separate vxlan_fdb_create
Main motivation for this change is to introduce the ability
to decouple vxlan fdb creation and notify, used in a later patch.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_configure_link sets dev->rtnl_link_state to
RTNL_LINK_INITIALIZED and unconditionally calls
__dev_notify_flags to notify user-space of dev flags.
current call sequence for rtnl_configure_link
rtnetlink_newlink
rtnl_link_ops->newlink
rtnl_configure_link (unconditionally notifies userspace of
default and new dev flags)
If a newlink handler wants to call rtnl_configure_link
early, we will end up with duplicate notifications to
user-space.
This patch fixes rtnl_configure_link to check rtnl_link_state
and call __dev_notify_flags with gchanges = 0 if already
RTNL_LINK_INITIALIZED.
Later in the series, this patch will help the following sequence
where a driver implementing newlink can call rtnl_configure_link
to initialize the link early.
makes the following call sequence work:
rtnetlink_newlink
rtnl_link_ops->newlink (vxlan) -> rtnl_configure_link (initializes
link and notifies
user-space of default
dev flags)
rtnl_configure_link (updates dev flags if requested by user ifm
and notifies user-space of new dev flags)
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A newly added dummy helper function tries to return a failure from a "void"
function:
In file included from include/net/dsa.h:24,
from arch/arm/plat-orion/common.c:21:
include/net/devlink.h: In function 'devlink_param_value_changed':
include/net/devlink.h:771:9: error: 'return' with a value, in function returning void [-Werror]
return -EOPNOTSUPP;
This fixes it by removing the bogus statement.
Fixes: ea601e1709 ("devlink: Add devlink notifications support for params")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, gcc correctly points out
that the 'vid' variable is uninitialized whenever br_vlan_get_pvid
returns an error:
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_rif_vlan_fid_get':
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6881:6: error: 'vid' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This changes the condition check to always return -EINVAL here,
which I guess is what the author intended here.
Fixes: e6f1960ae6 ("mlxsw: spectrum_router: Allocate FID according to PVID")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta says:
====================
Misc. bug fixes & cleanups for HNS3 driver
This patch-set presents some miscellaneous bug fixes and cleanups
for the HNS3 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
According to hardware's description, driver should not send command to
IMP while hardware doing global or core reset.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only the core/global/IMP reset need clear cause, other type does not
need do it. The warning may be treated as error as it is normal. This
patch removes the warning.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hclgevf_free_vector function expects the caller to pass
the vector_id to it, and hclgevf_put_vector pass vector to
it now, which will cause vector allocation problem.
This patch fixes it by converting vector into vector_id before
calling hclgevf_free_vector.
Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The napi_alloc_skb is excepted to be called under the
non-preemptible code path when it is called by hns3_clean_rx_ring
during loopback selftest, otherwise the below warning will be
logged:
[ 92.420780] BUG: using smp_processor_id() in preemptible
[00000000] code: ethtool/1873
<SNIP>
[ 92.463202] check_preemption_disabled+0xf8/0x100
[ 92.467893] debug_smp_processor_id+0x1c/0x28
[ 92.472239] __napi_alloc_skb+0x30/0x130
[ 92.476158] hns3_clean_rx_ring+0x118/0x5f0 [hns3]
[ 92.480941] hns3_self_test+0x32c/0x4d0 [hns3]
[ 92.485375] ethtool_self_test+0xdc/0x1e8
[ 92.489372] dev_ethtool+0x1020/0x1da8
[ 92.493109] dev_ioctl+0x188/0x3a0
[ 92.496499] sock_do_ioctl+0xf4/0x208
[ 92.500148] sock_ioctl+0x228/0x3e8
[ 92.503626] do_vfs_ioctl+0xc4/0x880
[ 92.507189] SyS_ioctl+0x94/0xa8
[ 92.510404] el0_svc_naked+0x30/0x34
This patch fix it by disabling preemption when calling
hns3_clean_rx_ring during loopback selftest.
Fixes: c39c4d98dc ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When change the mtu, the minimal frame size of mac will be set
to zero, it is incorrect. This patch fixes it by set it to the
default value.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The payload of mailbox message is 16 byte and the value of
HCLGE_MBX_MAX_ARQ_MSG_SIZE is 8. A message truncated problem will
happen when mailbox message is converted to ARQ message. This patch
replaces HCLGE_MBX_MAX_ARQ_MSG_SIZE with the size of ARQ message in
hclgevf_mbx_handler to fix this problem.
Fixes: b11a0bb231 ("net: hns3: Add mailbox support to VF driver")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware only support tcp/udp/sctp l4 checksum offload, but
the driver currently tell hardware to do l4 checksum offlad when
l3 is IPv4 or IPv6, which may cause checksumm error.
This patch fixes it by only enabling the l4 offload when l4 is
tcp/udp/sctp.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HCLGE_RX_PRIV_EN_B is used to tell the firmware whether
to update the specific waterline value, if the is not set,
the firmware will ignore the value.
This patch fixes by setting the HCLGE_RX_PRIV_EN_B even if
the updated value is zero.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When pfc pause mode is enable, the mac pause mode need to be
disabled, otherwise the pfc pause packet will not be sent when
congestion happens.
This patch fixes by disabling the mac pause when pfc pause is
enabled.
Fixes: 848440544b ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tc related configuration is not setup when the
netdev is first up, which cause the stack only using tc 0
problem.
This patch fixes it by setting the tc related configuration
using the info from NCL_CONFIG when netdev is first up.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pre-1.7.2 NIC firmware does not support (and does not respond to) the "get
speed" command which is sent by the 1.7.2 driver (for CN23XX-225 cards
only) during modprobe. Due to a bug in older firmware (with respect to
unknown commands), this unsupported command causes a cascade of errors that
ends in a kernel panic.
Fix it by making the sending of the "get speed" command conditional on the
firmware version.
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn says:
====================
sock cookie initializers
Recent UDP GSO and SO_TXTIME features added new fields to cookie
structs.
When adding a field, all sites where a struct is initialized have to
be updated, which is a lot of boilerplate. Alternatively, a field can
be initialized selectively, but this is fragile. I introduced a bug
in udp gso where an uninitialized field was read. See also fix commit
("9887cba19978 ip: limit use of gso_size to udp").
Introduce initializers for structs ipcm(6)_cookie and sockc_cookie.
patch 1..3 do exactly this.
patch 4..5 make ipv4 and ipv6 handle cookies the same way and
remove some boilerplate in doing so.
patch 6 removes the udp gso branch that needed the above fix
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that ipc(6)->gso_size is correctly initialized in all callers of
ip(6)_setup_cork, it is safe to unconditionally pass it to the cork.
Link: http://lkml.kernel.org/r/20180619164752.143249-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_shinfo(skb)->tx_flags is derived from sk->sk_tsflags, possibly
after modification by __sock_cmsg_send, by calling sock_tx_timestamp.
The IPv4 and IPv6 paths do this conversion differently. In IPv4, the
individual protocols that support tx timestamps call this function
and store the result in ipc.tx_flags. In IPv6, sock_tx_timestamp is
called in __ip6_append_data.
There is no need to store both tx_flags and ts_flags in the cookie
as one is derived from the other. Convert when setting up the cork
and remove the redundant field. This is similar to IPv6, only have
the conversion happen only once per datagram, in ip(6)_setup_cork.
Also change __ip6_append_data to match __ip_append_data. Only update
tskey if timestamping is enabled with OPT_ID. The SOCK_.. test is
redundant: only valid protocols can have non-zero cork->tx_flags.
After this change the IPv4 and IPv6 logic is the same.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov