Lorenz recently reported:
In our TC classifier cls_redirect [0], we use the following sequence of
helper calls to decapsulate a GUE (basically IP + UDP + custom header)
encapsulated packet:
bpf_skb_adjust_room(skb, -encap_len, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_FIXED_GSO)
bpf_redirect(skb->ifindex, BPF_F_INGRESS)
It seems like some checksums of the inner headers are not validated in
this case. For example, a TCP SYN packet with invalid TCP checksum is
still accepted by the network stack and elicits a SYN ACK. [...]
That is, we receive the following packet from the driver:
| ETH | IP | UDP | GUE | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
ip_summed is CHECKSUM_UNNECESSARY because our NICs do rx checksum offloading.
On this packet we run skb_adjust_room_mac(-encap_len), and get the following:
| ETH | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
Note that ip_summed is still CHECKSUM_UNNECESSARY. After bpf_redirect()'ing
into the ingress, we end up in tcp_v4_rcv(). There, skb_checksum_init() is
turned into a no-op due to CHECKSUM_UNNECESSARY.
The bpf_skb_adjust_room() helper is not aware of protocol specifics. Internally,
it handles the CHECKSUM_COMPLETE case via skb_postpull_rcsum(), but that does
not cover CHECKSUM_UNNECESSARY. In this case skb->csum_level of the original
skb prior to bpf_skb_adjust_room() call was 0, that is, covering UDP. Right now
there is no way to adjust the skb->csum_level. NICs that have checksum offload
disabled (CHECKSUM_NONE) or that support CHECKSUM_COMPLETE are not affected.
Use a safe default for CHECKSUM_UNNECESSARY by resetting to CHECKSUM_NONE and
add a flag to the helper called BPF_F_ADJ_ROOM_NO_CSUM_RESET that allows users
from opting out. Opting out is useful for the case where we don't remove/add
full protocol headers, or for the case where a user wants to adjust the csum
level manually e.g. through bpf_csum_level() helper that is added in subsequent
patch.
The bpf_skb_proto_{4_to_6,6_to_4}() for NAT64/46 translation from the BPF
bpf_skb_change_proto() helper uses bpf_skb_net_hdr_{push,pop}() pair internally
as well but doesn't change layers, only transitions between v4 to v6 and vice
versa, therefore no adoption is required there.
[0] https://lore.kernel.org/bpf/20200424185556.7358-1-lmb@cloudflare.com/
Fixes: 2be7e212d5 ("bpf: add bpf_skb_adjust_room helper")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/CACAyw9-uU_52esMd1JjuA80fRPHJv5vsSg8GnfW3t_qDU4aVKQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/11a90472e7cce83e76ddbfce81fdfce7bfc68808.1591108731.git.daniel@iogearbox.net
Fix config file to require CONFIG_TEST_SYSCTL=m instead of y
because this driver introduces a test sysctl interfaces which
are normally not used, and only used for the selftest.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix to load test_sysctl.ko module correctly.
sysctl.sh checks whether the test module is embedded (or loaded
already) or not at first, and if not, it returns skip error
instead of trying modprobe. Thus, there is no chance to load the
test_sysctl test module.
Instead, this removes that module embedded check and returns
skip error only if it ensures that there is no embedded test
module *and* no loadable test module.
This also avoid referring config file since that is not
installed.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There exists some duplicated includes in tools/perf, remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1591071304-19338-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao reported the issue (and posted first versions of this change)
with groups being defined over events with different cpu mask.
This causes assert aborts in get_group_fd, like:
# perf stat -M "C2_Pkg_Residency" -a -- sleep 1
perf: util/evsel.c:1464: get_group_fd: Assertion `!(fd == -1)' failed.
Aborted
All the events in the group have to be defined over the same cpus so the
group_fd can be found for every leader/member pair.
Adding check to ensure this condition is met and removing the group
(with warning) if we detect mixed cpus, like:
$ sudo perf stat -e '{power/energy-cores/,cycles},{instructions,power/energy-cores/}'
WARNING: event cpu maps do not match, disabling group:
anon group { power/energy-cores/, cycles }
anon group { instructions, power/energy-cores/ }
Ian asked also for cpu maps details, it's displayed in verbose mode:
$ sudo perf stat -e '{cycles,power/energy-cores/}' -v
WARNING: group events cpu maps do not match, disabling group:
anon group { power/energy-cores/, cycles }
power/energy-cores/: 0
cycles: 0-7
anon group { instructions, power/energy-cores/ }
instructions: 0-7
power/energy-cores/: 0
Committer testing:
[root@seventh ~]# perf stat -e '{power/energy-cores/,cycles},{instructions,power/energy-cores/}'
WARNING: grouped events cpus do not match, disabling group:
anon group { power/energy-cores/, cycles }
anon group { instructions, power/energy-cores/ }
^C
Performance counter stats for 'system wide':
12.62 Joules power/energy-cores/
106,920,637 cycles
80,228,899 instructions # 0.75 insn per cycle
12.62 Joules power/energy-cores/
14.514476987 seconds time elapsed
[root@seventh ~]#
But if we put compatible events in each group it works:
[root@seventh ~]# perf stat -e '{power/energy-cores/,power/energy-ram/},{instructions,cycles}' -a sleep 2
Performance counter stats for 'system wide':
1.95 Joules power/energy-cores/
0.92 Joules power/energy-ram/
29,305,715 instructions # 1.03 insn per cycle
28,423,338 cycles
2.001438142 seconds time elapsed
[root@seventh ~]#
This needs improvement tho:
[root@seventh ~]# perf stat -e '{power/energy-cores/,power/energy-ram/},{instructions,cycles}' sleep 2
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (power/energy-cores/).
/bin/dmesg | grep -i perf may provide additional information.
[root@seventh ~]#
We need to emit a better message, one stating that the power/ events
can't be used for a specific workload, instead it is per-cpu or system
wide.
Fixes: 6a4bb04caa ("perf tools: Enable grouping logic for parsed events")
Co-developed-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200602101736.GE1112120@krava
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull vfs updates from Al Viro:
"Assorted patches from Miklos.
An interesting part here is /proc/mounts stuff..."
The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.
Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).
* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add faccessat2 syscall
vfs: don't parse "silent" option
vfs: don't parse "posixacl" option
vfs: don't parse forbidden flags
statx: add mount_root
statx: add mount ID
statx: don't clear STATX_ATIME on SB_RDONLY
uapi: deprecate STATX_ALL
utimensat: AT_EMPTY_PATH support
vfs: split out access_override_creds()
proc/mounts: add cursor
aio: fix async fsync creds
vfs: allow unprivileged whiteout creation
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
Extend the existing flow_dissector test case to run tests once using direct
prog attachments, and then for the second time using indirect attachment
via link.
The intention is to exercises the newly added high-level API for attaching
programs to network namespace with links (bpf_program__attach_netns).
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-13-jakub@cloudflare.com
Switch flow dissector test setup from custom BPF object loader to BPF
skeleton to save boilerplate and prepare for testing higher-level API for
attaching flow dissector with bpf_link.
To avoid depending on program order in the BPF object when populating the
flow dissector PROG_ARRAY map, change the program section names to contain
the program index into the map. This follows the example set by tailcall
tests.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-12-jakub@cloudflare.com
test_flow_dissector leaves a TAP device after it's finished, potentially
interfering with other tests that will run after it. Fix it by closing the
TAP descriptor on cleanup.
Fixes: 0905beec9f ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-11-jakub@cloudflare.com
Extend the existing test case for flow dissector attaching to cover:
- link creation,
- link updates,
- link info querying,
- mixing links with direct prog attachment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-10-jakub@cloudflare.com
Code for printing link attach_type is duplicated in a couple of places, and
likely will be duplicated for future link types as well. Create helpers to
prevent duplication.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-8-jakub@cloudflare.com
Add bpf_program__attach_nets(), which uses LINK_CREATE subcommand to create
an FD-based kernel bpf_link, for attach types tied to network namespace,
that is BPF_FLOW_DISSECTOR for the moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-7-jakub@cloudflare.com
Extend bpf() syscall subcommands that operate on bpf_link, that is
LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to
network namespaces (only flow dissector at the moment).
Link-based and prog-based attachment can be used interchangeably, but only
one can exist at a time. Attempts to attach a link when a prog is already
attached directly, and the other way around, will be met with -EEXIST.
Attempts to detach a program when link exists result in -EINVAL.
Attachment of multiple links of same attach type to one netns is not
supported with the intention to lift the restriction when a use-case
presents itself. Because of that link create returns -E2BIG when trying to
create another netns link, when one already exists.
Link-based attachments to netns don't keep a netns alive by holding a ref
to it. Instead links get auto-detached from netns when the latter is being
destroyed, using a pernet pre_exit callback.
When auto-detached, link lives in defunct state as long there are open FDs
for it. -ENOLINK is returned if a user tries to update a defunct link.
Because bpf_link to netns doesn't hold a ref to struct net, special care is
taken when releasing, updating, or filling link info. The netns might be
getting torn down when any of these link operations are in progress. That
is why auto-detach and update/release/fill_info are synchronized by the
same mutex. Also, link ops have to always check if auto-detach has not
happened yet and if netns is still alive (refcnt > 0).
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
On systems with recent enough glibc, reallocarray compat won't kick in, so
reallocarray() itself has to come from stdlib.h include. But _GNU_SOURCE is
necessary to enable it. So add it.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200601202601.2139477-1-andriin@fb.com
This test intended to verify if SO_BINDTODEVICE option works in
bpf_setsockopt. Because we already in the SOL_SOCKET level in this
connect bpf prog its safe to verify the sanity in the beginning of
the connect_v4_prog by calling the bind_to_device test helper.
The testing environment already created by the test_sock_addr.sh
script so this test assume that two netdevices already existing in
the system: veth pair with names test_sock_addr1 and test_sock_addr2.
The test will try to bind the socket to those devices first.
Then the test assume there are no netdevice with "nonexistent_dev"
name so the bpf_setsockopt will give use ENODEV error.
At the end the test remove the device binding from the socket
by binding it to an empty name.
Signed-off-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/3f055b8e45c65639c5c73d0b4b6c589e60b86f15.1590871065.git.fejes@inf.elte.hu
This adds a test for bpf ingress policy. To ensure data writes happen
as expected with extra TLS headers we run these tests with data
verification enabled by default. This will test receive packets have
"PASS" stamped into the front of the payload.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159079363965.5745.3390806911628980210.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests to verify ability to add an XDP program to a
entry in a DEVMAP.
Add negative tests to show DEVMAP programs can not be
attached to devices as a normal XDP program, and accesses
to egress_ifindex require BPF_XDP_DEVMAP attach type.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-6-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Support SEC("xdp_devmap*") as a short cut for loading the program with
type BPF_PROG_TYPE_XDP and expected attach type BPF_XDP_DEVMAP.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-5-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add xdp_txq_info as the Tx counterpart to xdp_rxq_info. At the
moment only the device is added. Other fields (queue_index)
can be added as use cases arise.
>From a UAPI perspective, add egress_ifindex to xdp context for
bpf programs to see the Tx device.
Update the verifier to only allow accesses to egress_ifindex by
XDP programs with BPF_XDP_DEVMAP expected attach type.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-4-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add BPF_XDP_DEVMAP attach type for use with programs associated with a
DEVMAP entry.
Allow DEVMAPs to associate a program with a device entry by adding
a bpf_prog.fd to 'struct bpf_devmap_val'. Values read show the program
id, so the fd and id are a union. bpf programs can get access to the
struct via vmlinux.h.
The program associated with the fd must have type XDP with expected
attach type BPF_XDP_DEVMAP. When a program is associated with a device
index, the program is run on an XDP_REDIRECT and before the buffer is
added to the per-cpu queue. At this point rxq data is still valid; the
next patch adds tx device information allowing the prorgam to see both
ingress and egress device indices.
XDP generic is skb based and XDP programs do not work with skb's. Block
the use case by walking maps used by a program that is to be attached
via xdpgeneric and fail if any of them are DEVMAP / DEVMAP_HASH with
Block attach of BPF_XDP_DEVMAP programs to devices.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-3-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend bench framework with ability to have benchmark-provided child argument
parser for custom benchmark-specific parameters. This makes bench generic code
modular and independent from any specific benchmark.
Also implement a set of benchmarks for new BPF ring buffer and existing perf
buffer. 4 benchmarks were implemented: 2 variations for each of BPF ringbuf
and perfbuf:,
- rb-libbpf utilizes stock libbpf ring_buffer manager for reading data;
- rb-custom implements custom ring buffer setup and reading code, to
eliminate overheads inherent in generic libbpf code due to callback
functions and the need to update consumer position after each consumed
record, instead of batching updates (due to pessimistic assumption that
user callback might take long time and thus could unnecessarily hold ring
buffer space for too long);
- pb-libbpf uses stock libbpf perf_buffer code with all the default
settings, though uses higher-performance raw event callback to minimize
unnecessary overhead;
- pb-custom implements its own custom consumer code to minimize any possible
overhead of generic libbpf implementation and indirect function calls.
All of the test support default, no data notification skipped, mode, as well
as sampled mode (with --rb-sampled flag), which allows to trigger epoll
notification less frequently and reduce overhead. As will be shown, this mode
is especially critical for perf buffer, which suffers from high overhead of
wakeups in kernel.
Otherwise, all benchamrks implement similar way to generate a batch of records
by using fentry/sys_getpgid BPF program, which pushes a bunch of records in
a tight loop and records number of successful and dropped samples. Each record
is a small 8-byte integer, to minimize the effect of memory copying with
bpf_perf_event_output() and bpf_ringbuf_output().
Benchmarks that have only one producer implement optional back-to-back mode,
in which record production and consumption is alternating on the same CPU.
This is the highest-throughput happy case, showing ultimate performance
achievable with either BPF ringbuf or perfbuf.
All the below scenarios are implemented in a script in
benchs/run_bench_ringbufs.sh. Tests were performed on 28-core/56-thread
Intel Xeon CPU E5-2680 v4 @ 2.40GHz CPU.
Single-producer, parallel producer
==================================
rb-libbpf 12.054 ± 0.320M/s (drops 0.000 ± 0.000M/s)
rb-custom 8.158 ± 0.118M/s (drops 0.001 ± 0.003M/s)
pb-libbpf 0.931 ± 0.007M/s (drops 0.000 ± 0.000M/s)
pb-custom 0.965 ± 0.003M/s (drops 0.000 ± 0.000M/s)
Single-producer, parallel producer, sampled notification
========================================================
rb-libbpf 11.563 ± 0.067M/s (drops 0.000 ± 0.000M/s)
rb-custom 15.895 ± 0.076M/s (drops 0.000 ± 0.000M/s)
pb-libbpf 9.889 ± 0.032M/s (drops 0.000 ± 0.000M/s)
pb-custom 9.866 ± 0.028M/s (drops 0.000 ± 0.000M/s)
Single producer on one CPU, consumer on another one, both running at full
speed. Curiously, rb-libbpf has higher throughput than objectively faster (due
to more lightweight consumer code path) rb-custom. It appears that faster
consumer causes kernel to send notifications more frequently, because consumer
appears to be caught up more frequently. Performance of perfbuf suffers from
default "no sampling" policy and huge overhead that causes.
In sampled mode, rb-custom is winning very significantly eliminating too
frequent in-kernel wakeups, the gain appears to be more than 2x.
Perf buffer achieves even more impressive wins, compared to stock perfbuf
settings, with 10x improvements in throughput with 1:500 sampling rate. The
trade-off is that with sampling, application might not get next X events until
X+1st arrives, which is not always acceptable. With steady influx of events,
though, this shouldn't be a problem.
Overall, single-producer performance of ring buffers seems to be better no
matter the sampled/non-sampled modes, but it especially beats ring buffer
without sampling due to its adaptive notification approach.
Single-producer, back-to-back mode
==================================
rb-libbpf 15.507 ± 0.247M/s (drops 0.000 ± 0.000M/s)
rb-libbpf-sampled 14.692 ± 0.195M/s (drops 0.000 ± 0.000M/s)
rb-custom 21.449 ± 0.157M/s (drops 0.000 ± 0.000M/s)
rb-custom-sampled 20.024 ± 0.386M/s (drops 0.000 ± 0.000M/s)
pb-libbpf 1.601 ± 0.015M/s (drops 0.000 ± 0.000M/s)
pb-libbpf-sampled 8.545 ± 0.064M/s (drops 0.000 ± 0.000M/s)
pb-custom 1.607 ± 0.022M/s (drops 0.000 ± 0.000M/s)
pb-custom-sampled 8.988 ± 0.144M/s (drops 0.000 ± 0.000M/s)
Here we test a back-to-back mode, which is arguably best-case scenario both
for BPF ringbuf and perfbuf, because there is no contention and for ringbuf
also no excessive notification, because consumer appears to be behind after
the first record. For ringbuf, custom consumer code clearly wins with 21.5 vs
16 million records per second exchanged between producer and consumer. Sampled
mode actually hurts a bit due to slightly slower producer logic (it needs to
fetch amount of data available to decide whether to skip or force notification).
Perfbuf with wakeup sampling gets 5.5x throughput increase, compared to
no-sampling version. There also doesn't seem to be noticeable overhead from
generic libbpf handling code.
Perfbuf back-to-back, effect of sample rate
===========================================
pb-sampled-1 1.035 ± 0.012M/s (drops 0.000 ± 0.000M/s)
pb-sampled-5 3.476 ± 0.087M/s (drops 0.000 ± 0.000M/s)
pb-sampled-10 5.094 ± 0.136M/s (drops 0.000 ± 0.000M/s)
pb-sampled-25 7.118 ± 0.153M/s (drops 0.000 ± 0.000M/s)
pb-sampled-50 8.169 ± 0.156M/s (drops 0.000 ± 0.000M/s)
pb-sampled-100 8.887 ± 0.136M/s (drops 0.000 ± 0.000M/s)
pb-sampled-250 9.180 ± 0.209M/s (drops 0.000 ± 0.000M/s)
pb-sampled-500 9.353 ± 0.281M/s (drops 0.000 ± 0.000M/s)
pb-sampled-1000 9.411 ± 0.217M/s (drops 0.000 ± 0.000M/s)
pb-sampled-2000 9.464 ± 0.167M/s (drops 0.000 ± 0.000M/s)
pb-sampled-3000 9.575 ± 0.273M/s (drops 0.000 ± 0.000M/s)
This benchmark shows the effect of event sampling for perfbuf. Back-to-back
mode for highest throughput. Just doing every 5th record notification gives
3.5x speed up. 250-500 appears to be the point of diminishing return, with
almost 9x speed up. Most benchmarks use 500 as the default sampling for pb-raw
and pb-custom.
Ringbuf back-to-back, effect of sample rate
===========================================
rb-sampled-1 1.106 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-sampled-5 4.746 ± 0.149M/s (drops 0.000 ± 0.000M/s)
rb-sampled-10 7.706 ± 0.164M/s (drops 0.000 ± 0.000M/s)
rb-sampled-25 12.893 ± 0.273M/s (drops 0.000 ± 0.000M/s)
rb-sampled-50 15.961 ± 0.361M/s (drops 0.000 ± 0.000M/s)
rb-sampled-100 18.203 ± 0.445M/s (drops 0.000 ± 0.000M/s)
rb-sampled-250 19.962 ± 0.786M/s (drops 0.000 ± 0.000M/s)
rb-sampled-500 20.881 ± 0.551M/s (drops 0.000 ± 0.000M/s)
rb-sampled-1000 21.317 ± 0.532M/s (drops 0.000 ± 0.000M/s)
rb-sampled-2000 21.331 ± 0.535M/s (drops 0.000 ± 0.000M/s)
rb-sampled-3000 21.688 ± 0.392M/s (drops 0.000 ± 0.000M/s)
Similar benchmark for ring buffer also shows a great advantage (in terms of
throughput) of skipping notifications. Skipping every 5th one gives 4x boost.
Also similar to perfbuf case, 250-500 seems to be the point of diminishing
returns, giving roughly 20x better results.
Keep in mind, for this test, notifications are controlled manually with
BPF_RB_NO_WAKEUP and BPF_RB_FORCE_WAKEUP. As can be seen from previous
benchmarks, adaptive notifications based on consumer's positions provides same
(or even slightly better due to simpler load generator on BPF side) benefits in
favorable back-to-back scenario. Over zealous and fast consumer, which is
almost always caught up, will make thoughput numbers smaller. That's the case
when manual notification control might prove to be extremely beneficial.
Ringbuf back-to-back, reserve+commit vs output
==============================================
reserve 22.819 ± 0.503M/s (drops 0.000 ± 0.000M/s)
output 18.906 ± 0.433M/s (drops 0.000 ± 0.000M/s)
Ringbuf sampled, reserve+commit vs output
=========================================
reserve-sampled 15.350 ± 0.132M/s (drops 0.000 ± 0.000M/s)
output-sampled 14.195 ± 0.144M/s (drops 0.000 ± 0.000M/s)
BPF ringbuf supports two sets of APIs with various usability and performance
tradeoffs: bpf_ringbuf_reserve()+bpf_ringbuf_commit() vs bpf_ringbuf_output().
This benchmark clearly shows superiority of reserve+commit approach, despite
using a small 8-byte record size.
Single-producer, consumer/producer competing on the same CPU, low batch count
=============================================================================
rb-libbpf 3.045 ± 0.020M/s (drops 3.536 ± 0.148M/s)
rb-custom 3.055 ± 0.022M/s (drops 3.893 ± 0.066M/s)
pb-libbpf 1.393 ± 0.024M/s (drops 0.000 ± 0.000M/s)
pb-custom 1.407 ± 0.016M/s (drops 0.000 ± 0.000M/s)
This benchmark shows one of the worst-case scenarios, in which producer and
consumer do not coordinate *and* fight for the same CPU. No batch count and
sampling settings were able to eliminate drops for ringbuffer, producer is
just too fast for consumer to keep up. But ringbuf and perfbuf still able to
pass through quite a lot of messages, which is more than enough for a lot of
applications.
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 10.916 ± 0.399M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 4.931 ± 0.030M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 4.880 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 3.926 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 4.011 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.967 ± 0.016M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 2.604 ± 0.030M/s (drops 0.001 ± 0.002M/s)
rb-libbpf nr_prod 20 2.233 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.085 ± 0.015M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.055 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.962 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.089 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.118 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.105 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.120 ± 0.058M/s (drops 0.000 ± 0.001M/s)
rb-libbpf nr_prod 52 2.074 ± 0.024M/s (drops 0.007 ± 0.014M/s)
Ringbuf uses a very short-duration spinlock during reservation phase, to check
few invariants, increment producer count and set record header. This is the
biggest point of contention for ringbuf implementation. This benchmark
evaluates the effect of multiple competing writers on overall throughput of
a single shared ringbuffer.
Overall throughput drops almost 2x when going from single to two
highly-contended producers, gradually dropping with additional competing
producers. Performance drop stabilizes at around 20 producers and hovers
around 2mln even with 50+ fighting producers, which is a 5x drop compared to
non-contended case. Good kernel implementation in kernel helps maintain decent
performance here.
Note, that in the intended real-world scenarios, it's not expected to get even
close to such a high levels of contention. But if contention will become
a problem, there is always an option of sharding few ring buffers across a set
of CPUs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-5-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both singleton BPF ringbuf and BPF ringbuf with map-in-map use cases are tested.
Also reserve+submit/discards and output variants of API are validated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-4-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Declaring and instantiating BPF ring buffer doesn't require any changes to
libbpf, as it's just another type of maps. So using existing BTF-defined maps
syntax with __uint(type, BPF_MAP_TYPE_RINGBUF) and __uint(max_elements,
<size-of-ring-buf>) is all that's necessary to create and use BPF ring buffer.
This patch adds BPF ring buffer consumer to libbpf. It is very similar to
perf_buffer implementation in terms of API, but also attempts to fix some
minor problems and inconveniences with existing perf_buffer API.
ring_buffer support both single ring buffer use case (with just using
ring_buffer__new()), as well as allows to add more ring buffers, each with its
own callback and context. This allows to efficiently poll and consume
multiple, potentially completely independent, ring buffers, using single
epoll instance.
The latter is actually a problem in practice for applications
that are using multiple sets of perf buffers. They have to create multiple
instances for struct perf_buffer and poll them independently or in a loop,
each approach having its own problems (e.g., inability to use a common poll
timeout). struct ring_buffer eliminates this problem by aggregating many
independent ring buffer instances under the single "ring buffer manager".
Second, perf_buffer's callback can't return error, so applications that need
to stop polling due to error in data or data signalling the end, have to use
extra mechanisms to signal that polling has to stop. ring_buffer's callback
can return error, which will be passed through back to user code and can be
acted upon appropariately.
Two APIs allow to consume ring buffer data:
- ring_buffer__poll(), which will wait for data availability notification
and will consume data only from reported ring buffer(s); this API allows
to efficiently use resources by reading data only when it becomes
available;
- ring_buffer__consume(), will attempt to read new records regardless of
data availablity notification sub-system. This API is useful for cases
when lowest latency is required, in expense of burning CPU resources.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-3-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For write-only stacks and queues bpf_map_update_elem should be allowed, but
bpf_map_lookup_elem and bpf_map_lookup_and_delete_elem should fail with EPERM.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-6-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make comments inside the test_map_rdonly and test_map_wronly tests
consistent with logic.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_map_rdonly and test_map_wronly tests should close file descriptors
which they open.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trivial fix to a typo in the test_map_wronly test: "read" -> "write"
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case the cpu_bufs are sparsely allocated they are not all
free'ed. These changes will fix this.
Fixes: fb84b82246 ("libbpf: add perf buffer API")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159056888305.330763.9684536967379110349.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lets test using probe* in SCHED_CLS network programs as well just
to be sure these keep working. Its cheap to add the extra test
and provides a second context to test outside of sk_msg after
we generalized probe* helpers to all networking types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159033911685.12355.15951980509828906214.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test itself is not particularly useful but it encodes a common
pattern we have.
Namely do a sk storage lookup then depending on data here decide if
we need to do more work or alternatively allow packet to PASS. Then
if we need to do more work consult task_struct for more information
about the running task. Finally based on this additional information
drop or pass the data. In this case the suspicious check is not so
realisitic but it encodes the general pattern and uses the helpers
so we test the workflow.
This is a load test to ensure verifier correctly handles this case.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159033909665.12355.6166415847337547879.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since dynamic symbols are used for dynamic linking it makes sense to
use them (readelf --dyn-syms) for abi check.
Found with some configuration on powerpc where linker puts
local *.plt_call.* symbols into .so.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200525061846.16524-1-yauheni.kaliuta@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current 'make install' results in only pkg-config and library binaries
being installed. For consistency also install headers as part of
"make install"
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200526174612.5447-1-nborisov@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This new API, perf_buffer__consume, can be used as follows:
- When you have a perf ring where wakeup_events is higher than 1,
and you have remaining data in the rings you would like to pull
out on exit (or maybe based on a timeout).
- For low latency cases where you burn a CPU that constantly polls
the queues.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf__parse_raw and btf__parse_elf return negative error numbers wrapped
in an ERR_PTR, so the extracted value needs to be negated before passing
them to strerror which expects a positive error number.
Before:
Error: failed to load BTF from .../vmlinux: Unknown error -2
After:
Error: failed to load BTF from .../vmlinux: No such file or directory
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200525135421.4154-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Following the introduction of CAP_BPF, and the switch from CAP_SYS_ADMIN
to other capabilities for various BPF features, update the capability
checks (and potentially, drops) in bpftool for feature probes. Because
bpftool and/or the system might not know of CAP_BPF yet, some caution is
necessary:
- If compiled and run on a system with CAP_BPF, check CAP_BPF,
CAP_SYS_ADMIN, CAP_PERFMON, CAP_NET_ADMIN.
- Guard against CAP_BPF being undefined, to allow compiling bpftool from
latest sources on older systems. If the system where feature probes
are run does not know of CAP_BPF, stop checking after CAP_SYS_ADMIN,
as this should be the only capability required for all the BPF
probing.
- If compiled from latest sources on a system without CAP_BPF, but later
executed on a newer system with CAP_BPF knowledge, then we only test
CAP_SYS_ADMIN. Some probes may fail if the bpftool process has
CAP_SYS_ADMIN but misses the other capabilities. The alternative would
be to redefine the value for CAP_BPF in bpftool, but this does not
look clean, and the case sounds relatively rare anyway.
Note that libcap offers a cap_to_name() function to retrieve the name of
a given capability (e.g. "cap_sys_admin"). We do not use it because
deriving the names from the macros looks simpler than using
cap_to_name() (doing a strdup() on the string) + cap_free() + handling
the case of failed allocations, when we just want to use the name of the
capability in an error message.
The checks when compiling without libcap (i.e. root versus non-root) are
unchanged.
v2:
- Do not allocate cap_list dynamically.
- Drop BPF-related capabilities when running with "unprivileged", even
if we didn't have the full set in the first place (in v1, we would
skip dropping them in that case).
- Keep track of what capabilities we have, print the names of the
missing ones for privileged probing.
- Attempt to drop only the capabilities we actually have.
- Rename a couple variables.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200523010247.20654-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is a clean-up for the formatting of the do_help functions for
bpftool's subcommands. The following fixes are included:
- Do not use argv[-2] for "iter" help message, as the help is shown by
default if no "iter" action is selected, resulting in messages looking
like "./bpftool bpftool pin...".
- Do not print unused HELP_SPEC_PROGRAM in help message for "bpftool
link".
- Andrii used argument indexing to avoid having multiple occurrences of
bin_name and argv[-2] in the fprintf() for the help message, for
"bpftool gen" and "bpftool link". Let's reuse this for all other help
functions. We can remove up to thirty arguments for the "bpftool map"
help message.
- Harmonise all functions, e.g. use ending quotes-comma on a separate
line.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200523010751.23465-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
The identation before this code
(`if not os.path.exists(cli_args.build_dir):``)
was with spaces instead of tabs after fixed up merge conflits,
this commit revert spaces to tabs:
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
File "tools/testing/kunit/kunit.py", line 247
if not linux:
^
TabError: inconsistent use of tabs and spaces in indentation
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 338, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 215, in main
add_config_opts(config_parser)
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 337, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 255, in main
result = run_tests(linux, request)
File "tools/testing/kunit/kunit.py", line 133, in run_tests
request.defconfig,
AttributeError: 'KunitRequest' object has no attribute 'defconfig'
Handles when there is no .kunitconfig, the error due to merge conflicts
between the following:
commit 9bdf64b351 ("kunit: use KUnit defconfig by default")
commit 45ba7a893a ("kunit: kunit_tool: Separate out
config/build/exec/parse")
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 335, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 246, in main
linux = kunit_kernel.LinuxSourceTree()
File "../tools/testing/kunit/kunit_kernel.py", line 109, in __init__
self._kconfig.read_from_file(kunitconfig_path)
File "t../ools/testing/kunit/kunit_config.py", line 88, in read_from_file
with open(path, 'r') as f:
FileNotFoundError: [Errno 2] No such file or directory: '.kunit/.kunitconfig'
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Speed up objtool significantly, especially when there are large number of sections
- Improve objtool's understanding of special instructions such as IRET,
to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dbCU
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"There are a lot of objtool changes in this cycle, all across the map:
- Speed up objtool significantly, especially when there are large
number of sections
- Improve objtool's understanding of special instructions such as
IRET, to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups"
* tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
objtool: Enable compilation of objtool for all architectures
objtool: Move struct objtool_file into arch-independent header
objtool: Exit successfully when requesting help
objtool: Add check_kcov_mode() to the uaccess safelist
samples/ftrace: Fix asm function ELF annotations
objtool: optimize add_dead_ends for split sections
objtool: use gelf_getsymshndx to handle >64k sections
objtool: Allow no-op CFI ops in alternatives
x86/retpoline: Fix retpoline unwind
x86: Change {JMP,CALL}_NOSPEC argument
x86: Simplify retpoline declaration
x86/speculation: Change FILL_RETURN_BUFFER to work with objtool
objtool: Add support for intra-function calls
objtool: Move the IRET hack into the arch decoder
objtool: Remove INSN_STACK
objtool: Make handle_insn_ops() unconditional
objtool: Rework allocating stack_ops on decode
objtool: UNWIND_HINT_RET_OFFSET should not check registers
objtool: is_fentry_call() crashes if call has no destination
x86,smap: Fix smap_{save,restore}() alternatives
...
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7U/r0RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hSNxAAirKhPGBoLI9DW1qde4OFhZg+BlIpS+LD
IE/0eGB8hGwhb1793RGbzIJfSnRQpSOPxWbWc6DJZ4Zpi5/ZbVkiPKsuXpM1xGxs
kuBCTOhWy1/p3iCZ1JH/JCrCAdWGZkIzEoaV7ipnHtV/+UrRbCWH5PB7R0fYvcbI
q5bUcWJyEp/bYMxQn8DhAih6SLPHx+F9qaGAqqloLSHstTYG2HkBhBGKnqcd/Jex
twkLK53poCkeP/c08V1dyagU2IRWj2jGB1NjYh/Ocm+Sn/vru15CVGspjVjqO5FF
oq07lad357ddMsZmKoM2F5DhXbOh95A+EqF9VDvIzCvfGMUgqYI1oxWF4eycsGhg
/aYJgYuN23YeEe2DkDzJB67GvBOwl4WgdoFaxKRzOiCSfrhkM8KqM4G9Fz1JIepG
abRJCF85iGcLslU9DkrShQiDsd/CRPzu/jz6ybK0I2II2pICo6QRf76T7TdOvKnK
yXwC6OdL7/dwOht20uT6XfnDXMCWI4MutiUrb8/C1DbaihwEaI2denr3YYL+IwrB
B38CdP6sfKZ5UFxKh0xb+sOzWrw0KA+ThSAXeJhz3tKdxdyB6nkaw3J9lFg8oi20
XGeAujjtjMZG5cxt2H+wO9kZY0RRau/nTqNtmmRrCobd5yJjHHPHH8trEd0twZ9A
X5Wjh11lv3E=
=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Generate packets matching the various control traps and check that the
traps' stats increase accordingly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh5 never became a product and has probably never really worked.
Remove it by recursively deleting all associated Kconfig options
and all corresponding files.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rich Felker <dalias@libc.org>
This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with some
of that work still not landed. Otherwise it's been fairly quiet for the
subsystem. Highlights include:
- Lots of performance improvements and fixes for the DesignWare driver
from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement Leger,
Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4,
and Intel Elkhart Lake.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U6r0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LasB/9npXOMe6tOT03YqtIhN4pxrdUo+LsN
A5Rc8prfQo7srnIZMndt5/wcTftomVdvjSNrtyXMXtzj+Logx01Pndrr6UVUP6Qq
Sy0R+4QXBSlj5QtUOBvGFTlzKw2BEaOBYftxVKQM6s4eoefvl0BFALHpEeaHvsDO
YXfwU8EK6sZylDzvsuVy2uoJlTcY4+wKop7JWY5Ze+LTUjsuJQVEG9zbxpZNEpOn
ZHO3FVS2MlIAuhcVmy0TfvYxTldTrT89zv8x4sKaPaXwDJFzYjJBwz77vYAjD8u5
i52JhrAMkZyU4SZdnciJLJx9oTdT8+Rj32oQBU6uK8nRN7U3zflNHHQw
=qm1J
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with
some of that work still not landed.
Otherwise it's been fairly quiet for the subsystem.
Highlights include:
- Lots of performance improvements and fixes for the DesignWare
driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
Leger, Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
Intel Elkhart Lake"
* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
spi: spi-fsl-dspi: fix native data copy
spi: Convert DW SPI binding to DT schema
spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
spi: dw: Make DMA request line assignments explicit for Intel Medfield
spi: bcm2835: Remove shared interrupt support
dt-bindings: snps,dw-apb-ssi: add optional reset property
spi: dw: add reset control
spi: bcm2835: Enable shared interrupt support
spi: bcm2835: Implement shutdown callback
spi: dw: Use regset32 DebugFS method to create regdump file
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Fix Rx-only DMA transfers
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
...
vmx_tsc_adjust_test fails with:
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is 281470681738540 (65534 * TSC_ADJUST_VALUE + 4294962476).
==== Test Assertion Failure ====
x86_64/vmx_tsc_adjust_test.c:153: false
pid=19738 tid=19738 - Interrupted system call
1 0x0000000000401192: main at vmx_tsc_adjust_test.c:153
2 0x00007fe1ef8583d4: ?? ??:0
3 0x0000000000401201: _start at ??:?
Failed guest assert: (adjust <= max)
The problem is that is 'tsc_val' should be u64, not u32 or the reading
gets truncated.
Fixes: 8d7fbf01f9 ("KVM: selftests: VMX preemption timer migration test")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200601154726.261868-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is currently working due to extra include paths in the build.
Before:
$ cd tools/perf/arch/arm64/util
$ ls -la ../../util/unwind-libdw.h
ls: cannot access '../../util/unwind-libdw.h': No such file or directory
After:
$ ls -la ../../../util/unwind-libdw.h
-rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200529225232.207532-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to add four options to synthesize events which are
described as below:
'f': synthesize first level cache events
'm': synthesize last level cache events
't': synthesize TLB events
'a': synthesize remote access events
This four options will be used by ARM SPE as their first consumer.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Tested-by: James Clark <james.clark@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200530122442.490-3-leo.yan@linaro.org
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create a new arm-spe-decoder directory for subsequent extensions and
move arm-spe-pkt-decoder.h/c to this directory. No code changes.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Qi Liu <liuqi115@hisilicon.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200530122442.490-2-leo.yan@linaro.org
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid a false positive caused by assembly code in arch/x86.
In tests, zero the perf_event to avoid uninitialized memory uses.
Warnings were caught using clang with -fsanitize=memory.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200530082015.39162-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tail call optimization can unexpectedly make the stack smaller and
cause the test to fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: clang-built-linux@googlegroups.com
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200530082015.39162-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tail call optimizations can remove stack frames that are used in
unwinding tests. Add an attribute that can be used to disable the tail
call optimization. Tested on clang and GCC.
Committer notes:
Old versions of clang don't like that __attribute__((optimize)), so add
an ifdef to make it go away.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: clang-built-linux@googlegroups.com
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200530082015.39162-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With synthetic events now a separate config item as a result of
'tracing: Move synthetic events to a separate file', tests that use
both need to explicitly check for hist trigger support rather than
relying on hist triggers to pull in synthetic events.
Add an additional hist trigger check to all the trigger tests that now
require it, otherwise they'll fail if synthetic events but not hist
triggers are enabled.
Link: http://lkml.kernel.org/r/af36c539006ef2768114b4ed38e6b054f7c7a3bd.1590693308.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Update tests to reflect new CPUID capabilities with SYNDBG.
Check that we get the right number of entries and that
0x40000000.EAX always returns the correct max leaf.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200529134543.1127440-7-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a nested VM with a VMX-preemption timer is migrated, verify that the
nested VM and its parent VM observe the VMX-preemption timer exit close to
the original expiration deadline.
Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200526215107.205814-3-makarandsonare@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_NESTED_STATE is now supported for AMD too but smm test acts like
it is still Intel only.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200529130407.57176-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test is similar to the existing one for VMX, but simpler because we
don't have to test shadow VMCS or vmptrld/vmptrst/vmclear.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many tests will want to check if the CPU is Intel or AMD in
guest code, add cpu_has_svm() and put it as static
inline to svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200529130407.57176-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current, which is
not the case when fork fails after taking a reference on the ioperm
bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: o"Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build.
-----BEGIN PGP SIGNATURE-----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=DmSb
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
A missing stats_update callback was recently added to act_pedit. Now that
iproute2 supports JSON dumping for pedit, extend the pedit_dsfield selftest
with a check that would have caught the fact that the callback was missing.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using ping in tests is error-prone, because ping is too smart. On a
flaky system (notably in a simulator), when packets don't come quickly
enough, more pings are sent, and that throws off counters. Instead use
mausezahn to generate ICMP echo request packets. That allows us to
send them in quicker succession as well, because the reason the ping
was made slow in the first place was to make the tests work on
simulated systems.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-29
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 7 day(s) which contain
a total of 4 files changed, 55 insertions(+), 34 deletions(-).
The main changes are:
1) minor verifier fix for fmod_ret progs, from Alexei.
2) af_xdp overflow check, from Bjorn.
3) minor verifier fix for 32bit assignment, from John.
4) powerpc has non-overlapping addr space, from Petr.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Added a verifier test for assigning 32bit reg states to
64bit where 32bit reg holds a constant value of 0.
Without previous kernel verifier.c fix, the test in
this patch will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159077335867.6014.2075350327073125374.stgit@john-Precision-5820-Tower
After previous fix for zero extension test_verifier tests #65 and #66 now
fail. Before the fix we can see the alu32 mov op at insn 10
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
smin_value=4294967168,smax_value=4294967423,
umin_value=4294967168,umax_value=4294967423,
var_off=(0x0; 0x1ffffffff),
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
10: (bc) w1 = w1
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
smin_value=0,smax_value=2147483647,
umin_value=0,umax_value=4294967295,
var_off=(0x0; 0xffffffff),
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
After the fix at insn 10 because we have 's32_min_value < 0' the following
step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value
bound into the smax_value as seen above in 11 with smax_value=2147483647.
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=4294967168,smax_value=4294967423,
umin_value=4294967168,umax_value=4294967423,
var_off=(0x0; 0x1ffffffff),
s32_min_value=-2147483648, s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
10: (bc) w1 = w1
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=0,smax_value=4294967295,
umin_value=0,umax_value=4294967295,
var_off=(0x0; 0xffffffff),
s32_min_value=-2147483648, s32_max_value=2147483647,
u32_min_value=0, u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
The fall out of this is by the time we get to the failing instruction at
step 14 where previously we had the following:
14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=72057594021150720,smax_value=72057594029539328,
umin_value=72057594021150720,umax_value=72057594029539328,
var_off=(0xffffffff000000; 0xffffff),
s32_min_value=-16777216,s32_max_value=-1,
u32_min_value=-16777216,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
14: (0f) r0 += r1
We now have,
14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=0,smax_value=72057594037927935,
umin_value=0,umax_value=72057594037927935,
var_off=(0x0; 0xffffffffffffff),
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
14: (0f) r0 += r1
In the original step 14 'smin_value=72057594021150720' this trips the logic
in the verifier function check_reg_sane_offset(),
if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) {
verbose(env, "value %lld makes %s pointer be out of bounds\n",
smin, reg_type_str[type]);
return false;
}
Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix
at step 14 we have bounds 'smin_value=0' so the above check is not tripped
because BPF_MAX_VAR_OFF=1<<29.
We have a smin_value=0 here because at step 10 the smaller smin_value=0 means
the subtractions at steps 11 and 12 bring the smin_value negative.
11: (17) r1 -= 2147483584
12: (17) r1 -= 2147483584
13: (77) r1 >>= 8
Then the shift clears the top bit and smin_value is set to 0. Note we still
have the smax_value in the fixed code so any reads will fail. An alternative
would be to have reg_sane_check() do both smin and smax value tests.
To fix the test we can omit the 'r1 >>=8' at line 13. This will change the
err string, but keeps the intention of the test as suggseted by the title,
"check after truncation of boundary-crossing range". If the verifier logic
changes a different value is likely to be thrown in the error or the error
will no longer be thrown forcing this test to be examined. With this change
we see the new state at step 13.
13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
smin_value=-4294967168,smax_value=127,
umin_value=0,umax_value=18446744073709551615,
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
Giving the expected out of bounds error, "value -4294967168 makes map_value
pointer be out of bounds" However, for unpriv case we see a different error
now because of the mixed signed bounds pointer arithmatic. This seems OK so
I've only added the unpriv_errstr for this. Another optino may have been to
do addition on r1 instead of subtraction but I favor the approach above
slightly.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159077333942.6014.14004320043595756079.stgit@john-Precision-5820-Tower
So that when one runs:
$ make -C tools/perf build-test
We make sure that recent changes don't break that opt-in build.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch links perf with the libpfm4 library if it is available and
LIBPFM4 is passed to the build. The libpfm4 library contains hardware
event tables for all processors supported by perf_events. It is a helper
library that helps convert from a symbolic event name to the event
encoding required by the underlying kernel interface. This library is
open-source and available from: http://perfmon2.sf.net.
With this patch, it is possible to specify full hardware events by name.
Hardware filters are also supported. Events must be specified via the
--pfm-events and not -e option. Both options are active at the same time
and it is possible to mix and match:
$ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles ....
One needs to explicitely ask for its inclusion by using the LIBPFM4 make
command line option, ie its opt-in rather than opt-out of feature
detection and build support.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200505182943.218248-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This header is part of the jsmn JSON parser, introduced in 867a979a83.
Correct the SPDX tag to indicate that it is under the MIT license.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lore.kernel.org/lkml/20200528170858.48457-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix an issue where addresses in the DWARF line table are offset by -0x40
(GEN_ELF_TEXT_OFFSET). This can be seen with `objdump -S` on the ELF
files after perf inject.
Committer notes:
Ian added this in his Acked-by reply:
---
Without too much knowledge this looks good to me. The original code came
from oprofile's jit support:
https://sourceforge.net/p/oprofile/oprofile/ci/master/tree/opjitconv/debug_line.c#l325
---
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200528051916.6722-1-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For each PC/BCI pair in the JVMTI compiler inlining record table, the
jitdump plugin emits debug line table entries for every source line in
the method preceding that BCI. Instead only emit one source line per
PC/BCI pair. Reported by Ian Rogers. This reduces the .dump size for
SPECjbb from ~230MB to ~40MB.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200528054049.13662-1-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:
$ make -C tools/perf build-test
It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.
Fixes: e26e63be64 ("perf build: Add sdt feature detection")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:
$ make -C tools/perf build-test
It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.
Fixes: 8ee4646038 ("perf build: Add libcrypto feature detection")
Cc: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we make sure that even on x86-64 and other architectures where
that is the default method we test build the fallback to libaudit that
other architectures use.
I.e. now this line got added to:
$ make -C tools/perf build-test
<SNIP>
make_no_syscall_tbl_O: cd . && make NO_SYSCALL_TABLE=1 FEATURES_DUMP=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP -j12 O=/tmp/tmp.W0HtKR1mfr DESTDIR=/tmp/tmp.lNezgCVPzW
<SNIP>
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo reported that the libaudit was always appearing as OFF:
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ OFF ]
And everything seemed to work, i.e. we were checking for a feature that
we don't use, causing confusion for people building perf, so work to
remove that nuisance while making sure that it works when an arch
doesn't provide the alternative method to generate the syscall id/name
conversion tables.
Longer explanation of the new modus operandi:
$ make -C tools/perf O=/tmp/build/perf NO_SYSCALL_TABLE=1
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
Makefile.config:665: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
MKDIR /tmp/build/perf/fs/
<SNIP>
$
The libaudit test is forced and it fails when audit-libs-devel isn't available:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
test-libaudit.c:2:10: fatal error: libaudit.h: No such file or directory
2 | #include <libaudit.h>
| ^~~~~~~~~~~~
compilation terminated.
$
If we install audit-libs-devel and rebuild it continues not to be shown as OFF
in the main auto-detection summary, but again gets tested and this time:
$ rpm -q audit-libs-devel
audit-libs-devel-3.0-0.15.20191104git1c2f876.fc31.x86_64
$
The make output for the feature detection comes clean:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
And the feature detection binary is successfully built and is dynamicly linked
with libaudit:
$ ldd /tmp/build/perf/feature/test-libaudit.bin | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007f5bf5177000)
$
As well as the resulting perf binary:
$ ldd /tmp/build/perf/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fad511c7000)
$
And 'perf trace' works using the libaudit method:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.067 ms): sleep/281872 nanosleep(rqtp: 0x7ffedbbe69d0) = 0
$
If we leave audit-libs-devel installed but don't disable the use of the best
method, the one using SYSCALL_TABLE, the default for architectures that provide
the script to build the syscall id/name mapping using the .tbl files copied
from the kernel sources, we get:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make -C tools/perf O=/tmp/build/perf
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
<SNIP>
$
Again, no mention of libaudit being on or OFF and:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
cat: /tmp/build/perf/feature/test-libaudit.make.output: No such file or directory
$
We didn't even bother checking for its availability, slightly speeding up the
build process and:
$ ldd /tmp/build/perf/perf | grep libaudit
$
We don't link with it, also:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.053 ms): sleep/299125 nanosleep(rqtp: 0x7ffc24611b50) = 0
$
And globs become available:
$ sudo /tmp/build/perf/perf trace -e *sleep sleep 1
0.000 (1000.072 ms): sleep/299136 nanosleep(rqtp: 0x7ffe7a3c4ff0) = 0
$
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The audit-libs API doesn't provide a way to figure out what is the
syscall with the greatest number/id, take that into account when using
that method to go on growing the syscall table as we the syscalls go on
appearing on the radar.
With this the libaudit based method is back working, i.e. when building
with:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007faef22df000)
$
perf trace is back working, which makes it functional in arches other
than x86_64, powerpc, arm64 and s390, that provides these generators:
$ find tools/perf/arch/ -name "*syscalltbl*"
tools/perf/arch/x86/entry/syscalls/syscalltbl.sh
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl
tools/perf/arch/s390/entry/syscalls/mksyscalltbl
tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl
$
Example output forcing the libaudit method on x86_64:
# perf trace -e file,nanosleep sleep 0.001
? ( ): sleep/859090 ... [continued]: execve()) = 0
0.045 ( 0.005 ms): sleep/859090 access(filename: 0x8733e850, mode: R) = -1 ENOENT (No such file or directory)
0.055 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x8733ba29, flags: RDONLY|CLOEXEC) = 3
0.079 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x87345d20, flags: RDONLY|CLOEXEC) = 3
0.085 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483f58, count: 832) = 832
0.090 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b50, count: 784) = 784
0.094 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b20, count: 32) = 32
0.098 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483ad0, count: 68) = 68
0.109 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483a50, count: 784) = 784
0.113 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483730, count: 32) = 32
0.117 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483710, count: 68) = 68
0.320 ( 0.008 ms): sleep/859090 openat(dfd: CWD, filename: 0x872c3660, flags: RDONLY|CLOEXEC) = 3
0.372 ( 1.057 ms): sleep/859090 nanosleep(rqtp: 0x7ffd9d484ac0) = 0
#
There are still some limitations when using the libaudit method, that
will be fixed at some point, i.e., this works with the mksyscalltbl
method but not with libaudit's:
# perf trace -e file,*sleep sleep 0.001
event syntax error: '*sleep'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the past this wasn't needed as the libaudit based code would use just
one field, and the alternative constructor would fill in all the fields,
but now that even when using the libaudit based method we need the other
fields, switch to zalloc() to make sure the other fields are zeroed at
instantiation time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we moved to a syscalltbl generated from the kernel syscall tables
(arch/..../syscall*.tbl) the idea was to either use it, when having the
generator (e.g. tools/perf/arch/x86/entry/syscalls/syscalltbl.sh), or
falling back to the previous audit-libs based way of mapping syscall ids
to strings and the other way around.
At first we just needed the audit_detect_machine() return to then use it
to the str->id/id->str, or the other fields for the now used by default
in the most well developed arches method of using the syscall table
generator.
The problem is that then the libaudit code fell into disrepair, and
architectures where it is the method used are not working.
Now, with NO_SYSCALL_TABLE=1 being possible to pass on the make command
line we can automate the testing of that method even on x86-64, arm64,
etc.
And doing it I noted that we actually use fields in both entries in the
union, oops, so ditch the union, as we need all those fields at the same
time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful to see if, on x86, the legacy libaudit still works, as it
is used in architectures that don't have the SYSCALL_TABLE logic and we
want to have it tested in 'make -C tools/perf/ build-test'.
E.g.:
Without having audit-libs-devel installed:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ OFF ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
Makefile.config:664: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
<SNIP>
After installing it:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ time make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin ; perf test python
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.c' differs from latest version at 'tools/lib/bpf/hashmap.c'
diff -u tools/perf/util/hashmap.c tools/lib/bpf/hashmap.c
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fc18978e000)
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200529155552.463-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in allowing to disable it from the make command line.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200529155552.463-2-acme@kernel.org
[ Fixed the logic for the filter part, it should be ifeq, not ifneq ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Nik's torture tests as a new set to stress the replace and cleanup
paths.
Torture test created by Nikolay Aleksandrov and then I adapted to
selftest and added IPv6 version.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check whether error_log file exists in tracing/error_log testcase
and return UNSUPPORTED if no error_log file.
This can happen if we run the ftracetest on the older stable
kernel.
Fixes: 4eab1cc461 ("selftests/ftrace: Add tracing/error_log testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since the built-in echo has different behavior in POSIX shell
(dash) and bash, kprobe_syntax_errors.tc can fail on dash which
interpret backslash escape automatically.
To fix this issue, we explicitly use printf "%s" (not interpret
backslash escapes) if the command string can include backslash.
Reported-by: Liu Yiding <yidingx.liu@intel.com>
Suggested-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stop the message displaying when user space is not being traced.
Example:
Prerequisites:
sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.068 MB perf.data ]
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Context switch events are added automatically by Intel PT and Coresight.
Make it possible to suppress them. That is useful for tracing the
scheduler without the disturbance that the switch event processing
creates.
Example:
Prerequisites:
$ which perf
~/bin/perf
$ sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
$ sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.938 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
572
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
0
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events marked as 'immediate' are started before other events to ensure
that there is context at the start of the main tracing events. The same
is true at the end of tracing, so disable 'immediate' events after other
events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the absence of any modules, no "modules" map is created, but there
are other executable pages to map, due to eBPF JIT, kprobe or ftrace.
Map them by recognizing that the first "module" symbol is not
necessarily from a module, and adjust the map accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For a Java method signature like:
Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V
The demangler produces:
void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int)
The arguments should be (java.lang.String, int, int) but the demangler
interprets the "S" in String as the type code for "short". Correct this
and two other minor things:
- There is no "bool" type in Java, should be "boolean".
- The demangler prepends "class" to every Java class name. This is not
standard Java syntax and it wastes a lot of horizontal space if the
signature is long. Remove this as there isn't any ambiguity between
class names and primitives.
Committer notes:
This was split from a larger patch that also added a java demangler
'perf test' entry, that, before this patch shows the error being fixed
by it:
$ perf test java
65: Demangle Java : FAILED!
$ perf test -v java
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
65: Demangle Java :
--- start ---
test child forked, pid 307264
FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
test child finished with -1
---- end ----
Demangle Java: FAILED!
$
After applying this patch:
$ perf test java
65: Demangle Java : Ok
$
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Split from a larger patch that was also fixing a problem with the java
demangler, so, before applying that patch we see:
$ perf test java
65: Demangle Java : FAILED!
$ perf test -v java
65: Demangle Java :
--- start ---
test child forked, pid 307264
FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
test child finished with -1
---- end ----
Demangle Java: FAILED!
$
Next patch should fix this.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the Java sources are compiled with -g:none to disable debug
information the perf JVMTI plugin reports a lot of errors like:
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
Instead if GetLineNumberTable returns JVMTI_ERROR_ABSENT_INFORMATION
simply skip emitting line number information for that method. Unlike the
previous patch these errors don't affect the jitdump generation, they
just generate a lot of noise.
Similarly for native methods which also don't have line tables.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-3-nick.gasson@arm.com
[ Moved || operator to the end of the line, not at the start of 2nd if condition ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a Java class is compiled with -g:none to omit debug information, the
JVMTI plugin won't write jitdump entries for any method in this class
and prints a lot of errors like:
java: GetSourceFileName failed with JVMTI_ERROR_ABSENT_INFORMATION
The call to GetSourceFileName is used to derive the file name `fn`, but
this value is not actually used since commit ca58d7e64b ("perf jvmti:
Generate correct debug information for inlined code") which moved the
file name lookup into fill_source_filenames(). So the call to
GetSourceFileName and related code can be safely removed.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-2-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to pass more data to the scanner so let's start with having it
to take pointer to 'struct parse_events_state' object instead of just
start token.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to pass the given evsel's count to metric data, because
it will be pushed again within the following metric_events loop.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|event_glob]
After:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|metric|metricgroup|event_glob]
Committer testing:
Before and after we get these outputs on a Lenovo t480s (i7-8650U):
# perf list metricgroup
List of pre-defined events (to be used in -e):
Metric Groups:
BrMispredicts
BrMispredicts_SMT
Branches
Cache_Misses
DSB
FLOPS
FLOPS_SMT
Fetch_BW
IcMiss
Instruction_Type
Memory_BW
Memory_Bound
Memory_Lat
No_group
PGO
Pipeline
Power
Retire
SMT
Summary
TLB
TLB_SMT
TopDownL1
TopDownL1_SMT
TopdownL1
TopdownL1_SMT
#
# perf list metric | head -11
Metrics:
Backend_Bound
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend]
Backend_Bound_SMT
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU]
Bad_Speculation
[This category represents fraction of slots wasted due to incorrect speculations]
Bad_Speculation_SMT
[This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU]
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200522064546.164259-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
--xed currently forces less. When piping the output to other scripts
this can waste a lot of CPU time because less is rather slow.
I've seen it using up a full core on its own in a pipeline.
Only force less when the output is actually a terminal.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200522020914.527564-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove unnecessary commas from events before they are parsed. This
avoids ',' being echoed by parse-events.l.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --metric-no-group that causes all events within metrics to not be
grouped. This can allow the event to get more time when multiplexed, but
may also lower accuracy.
Add --metric-no-merge option. By default events in different metrics may
be shared if the group of events for one metric is the same or larger
than that of the second. Sharing may increase or lower accuracy and so
is now configurable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A metric group contains multiple metrics. These metrics may use the same
events. If metrics use separate events then it leads to more
multiplexing and overall metric counts fail to sum to 100%.
Modify how metrics are associated with events so that if the events in
an earlier group satisfy the current metric, the same events are used.
A record of used events is kept and at the end of processing unnecessary
events are eliminated.
Before:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
920,211,343 uops_issued.any # 0.5 Backend_Bound (16.56%)
1,977,733,128 idq_uops_not_delivered.core (16.56%)
51,668,510 int_misc.recovery_cycles (16.56%)
732,305,692 uops_retired.retire_slots (16.56%)
1,497,621,849 cycles (16.56%)
721,098,274 uops_issued.any # 0.1 Bad_Speculation (16.79%)
1,332,681,791 cycles (16.79%)
552,475,482 uops_retired.retire_slots (16.79%)
47,708,340 int_misc.recovery_cycles (16.79%)
1,383,713,292 cycles
# 0.4 Frontend_Bound (16.76%)
2,013,757,701 idq_uops_not_delivered.core (16.76%)
1,373,363,790 cycles
# 0.1 Retiring (33.54%)
577,302,589 uops_retired.retire_slots (33.54%)
392,766,987 inst_retired.any # 0.3 IPC (50.24%)
1,351,873,350 cpu_clk_unhalted.thread (50.24%)
1,332,510,318 cycles
# 5330041272.0 SLOTS (49.90%)
1.006336145 seconds time elapsed
After:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
765,949,145 uops_issued.any # 0.1 Bad_Speculation
# 0.5 Backend_Bound (50.09%)
1,883,830,591 idq_uops_not_delivered.core # 0.3 Frontend_Bound (50.09%)
48,237,080 int_misc.recovery_cycles (50.09%)
581,798,385 uops_retired.retire_slots # 0.1 Retiring (50.09%)
1,361,628,527 cycles
# 5446514108.0 SLOTS (50.09%)
391,415,714 inst_retired.any # 0.3 IPC (49.91%)
1,336,486,781 cpu_clk_unhalted.thread (49.91%)
1.005469298 seconds time elapsed
Note: Bad_Speculation + Backend_Bound + Frontend_Bound + Retiring = 100%
after, where as before it is 110%. After there are 2 groups, whereas
before there are 6. After the cycles event appears once, before it
appeared 5 times.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When adding event groups to the group list, insert them in size order.
This performs an insertion sort on the group list. By placing the
largest groups at the front of the group list it is possible to see if a
larger group contains the same events as a later group. This can make
the later group redundant - it can reuse the events from the large
group. A later patch will add this sharing.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently event groups are placed into groups_list at the same time as
the events string containing the events is built. Separate these two
operations and build the groups_list first, then the event string from
the groups_list. This adds an ability to reorder the groups_list that
will be used in a later patch.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use early return in metricgroup__add_metric and try to make the intent
of the returns more intention revealing.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a metric contains the duration_time event then the event is placed
outside of the metric's group of events. Rather than split the group,
make it so the duration_time is immediately after the group.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix potential segment fault triggered in
put_tracepoints_path() when the address of the local variable 'path' be
freed in error path of record_saved_cmdline.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hongbo Yao <yaohongbo@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Link: http://lore.kernel.org/lkml/20200521133218.30150-5-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need to free "str" before return when asprintf() failed to avoid memory
leak.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hongbo Yao <yaohongbo@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently there's no error message prompted if we failed to start
workload. And we still get some trace which is confusing. Let's tell
users what happened.
Committer testing:
Before:
# perf ftrace nonsense |& head
5) | switch_mm_irqs_off() {
5) 0.400 us | load_new_mm_cr3();
5) 3.261 us | }
------------------------------------------
5) <idle>-0 => <...>-3494
------------------------------------------
5) | finish_task_switch() {
5) ==========> |
5) | smp_irq_work_interrupt() {
# type nonsense
-bash: type: nonsense: not found
#
After:
# perf ftrace nonsense |& head
workload failed: No such file or directory
# type nonsense
-bash: type: nonsense: not found
#
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200510150628.16610-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This align ftrace to other perf sub-commands that if no target specified
then we trace all functions.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200510150628.16610-2-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520191613.GA26869@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for new "stat.big-num" boolean option.
This allows a user to set a default for "--no-big-num" for "perf stat"
commands.
--
$ perf config stat.big-num
$ perf stat --event cycles /bin/true
Performance counter stats for '/bin/true':
778,849 cycles
[...]
$ perf config stat.big-num=false
$ perf config stat.big-num
stat.big-num=false
$ perf stat --event cycles /bin/true
Performance counter stats for '/bin/true':
769622 cycles
[...]
--
There is an interaction with "--field-separator" that must be
accommodated, such that specifying "--big-num --field-separator={x}"
still reports an invalid combination of options.
Documentation for perf-config and perf-stat updated.
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/1589991815-17951-1-git-send-email-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
key_scan_pos is a pointer for getting scan position in
bpf__obj_config_map() for each BPF map configuration term,
but it's misused when error not happened.
Committer notes:
The point is that the only user of this is:
tools/perf/util/parse-events.c
err = bpf__config_obj(obj, term, parse_state->evlist, &error_pos);
if (err) bpf__strerror_config_obj(obj, term, parse_state->evlist, &error_pos, err, errbuf, sizeof(errbuf));
And then:
int bpf__strerror_config_obj(struct bpf_object *obj __maybe_unused,
struct parse_events_term *term __maybe_unused,
struct evlist *evlist __maybe_unused,
int *error_pos __maybe_unused, int err,
char *buf, size_t size)
{
bpf__strerror_head(err, buf, size);
bpf__strerror_entry(BPF_LOADER_ERRNO__OBJCONF_MAP_TYPE,
"Can't use this config term with this map type");
bpf__strerror_end(buf, size);
return 0;
}
So this is infrastructure that Wang Nan put in place for providing
better error messages but that he ended up not using, so I'll apply the
fix, its correct even not fixing any real problem at this time.
Fixes: 066dacbf2a ("perf bpf: Add API to set values to map entries in a bpf object")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cheng Jian <cj.chengjian@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520033216.48310-1-bobo.shaobowang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To collect the overall statistics for interval mode, we copy the counts
from evsel->prev_raw_counts to evsel->counts.
For AGGR_GLOBAL mode, because the perf_stat_process_counter creates aggr
values from per cpu values, but the per cpu values are 0, so the
calculated aggr values will be always 0.
This patch uses a trick that saves the previous aggr value to the first
member of perf_counts, then aggr calculation in process_counter_values
can work correctly for AGGR_GLOBAL.
v6:
---
Add comments in perf_evlist__save_aggr_prev_raw_counts.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-5-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be useful to support the overall statistics for perf-stat
interval mode. For example, report the summary at the end of "perf-stat
-I" output.
But since perf-stat can support many aggregation modes, such as
--per-thread, --per-socket, -M and etc, we need a solution which doesn't
bring much complexity.
The idea is to use 'evsel->prev_raw_counts' which is updated in each
interval and it's saved with the latest counts. Before reporting the
summary, we copy the counts from evsel->prev_raw_counts to
evsel->counts, and next we just follow non-interval processing.
v5:
---
Don't save the previous aggr value to the member of [cpu0,thread0]
in perf_counts. Originally that was a trick because the
perf_stat_process_counter would create aggr values from per cpu
values. But we don't need to do that all the time. We will
handle it in next patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we want to reset the evsel->prev_raw_counts, zeroing the aggr is
not enough, we need to reset the perf_counts too.
The perf_counts__reset zeros the perf_counts, and it should zero the
aggr too. This patch changes perf_counts__reset to non-static, and calls
it in evsel__reset_prev_raw_counts to reset the prev_raw_counts.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Metrics like UNC_M_POWER_SELF_REFRESH encode 100 as "100." and
consequently the 100 is treated as a symbol. Alter the regular
expression to allow the dot to be before or after the number.
Note, this passed the pmu-events test as that tests the validity of a
number using strtod rather than lex code. strtod allows the dot after.
Add a test for this behavior.
Fixes: 26226a9772 (perf expr: Move expr lexer to flex)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use a bitmap rather than an array of bools.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520072814.128267-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian reported that we allow to parse following:
$ perf stat -e ,cycles true
which is wrong and we should fail, like we do with this fix:
$ perf stat -e ,cycles true
event syntax error: ',cycles'
\___ parser error
The reason is that we don't have rule for ',' in 'event' start condition
and it's matched and accepted by default rule.
Add scanner debug support (that Ian already added for expr code),
which was really useful for finding this. It's enabled together with
bison debug via 'make PARSER_DEBUG=1'.
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520074050.156988-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses of "ICT" and "Ict" are expanded to "Instruction Completion Table".
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1589915886-22992-1-git-send-email-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200515172926.GA31976@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid having struct branch_stack as a non-last structure member,
use allocated branch stack for PEBS sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2540ed9a-89f1-6d59-10c9-a66cc90db5d2@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Publish instructions on how to apply LSM hooks for access control to
perf_event_open() syscall on Fedora distro with Targeted SELinux policy
and then manage access to the syscall.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/290ded0a-c422-3749-5180-918fed1ee30f@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement selinux sysfs check to see the system is in enforcing mode and
print warning message with pointer to check audit logs.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/819338ce-d160-4a2f-f1aa-d756a2e7c6fc@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use a hashmap between a char* string and a double* value. While bpf's
hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >=
sizeof(double). Avoid a memory allocation when gathering ids by making
0.0 a special value encoded as NULL.
Original map suggestion by Andi Kleen:
https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/
and seconded by Jiri Olsa:
https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/
Committer notes:
There are fixes that need to land upstream before we can use libbpf's
headers, for now use our copy unconditionally, since the data structures
at this point are exactly the same, no problem.
When the fixes for libbpf's hashmap land upstream, we can fix this up.
Testing it:
Building with LIBBPF=1, i.e. the default:
$ perf -vv | grep -i bpf
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
$ nm ~/bin/perf | grep -i libbpf_ | wc -l
39
$ nm ~/bin/perf | grep -i hashmap_ | wc -l
17
$
Explicitely building without LIBBPF:
$ perf -vv | grep -i bpf
bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT
$
$ nm ~/bin/perf | grep -i libbpf_ | wc -l
0
$ nm ~/bin/perf | grep -i hashmap_ | wc -l
9
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kp singh <kpsingh@chromium.org>
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow use of hashmap in perf. Modify perf's check-headers.sh script to
check that the files are kept in sync, in the same way kernel headers
are checked. This will warn if they are out of sync at the start of a
perf build.
Committer note:
This starts out of synch as a fix went thru the bpf tree, namely the one
removing the needless libbpf_internal.h include in hashmap.h.
There is also another change related to __WORDSIZE, that as is in
tools/lib/bpf/hashmap.h causes the tools/perf/ build to fail in systems
such as Alpine Linus, that uses the Musl libc, so we need an alternative
way of having __WORDSIZE available, use the one used by
tools/include/linux/bitops.h, that builds in all the systems I have
build containers for.
These differences will be resolved at some point, so keep the warning in
check-headers.sh as a reminder.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kp singh <kpsingh@chromium.org>
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200515221732.44078-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joakim reported wrong duration_time value for interval bigger
than 4000 [1].
The problem is in the interval value we pass to update_stats
function, which is typed as 'unsigned int' and overflows when
we get over 2^32 (happens between intervals 4000 and 5000).
Retyping the passed value to unsigned long long.
[1] https://www.spinics.net/lists/linux-perf-users/msg11777.html
Fixes: b90f1333ef ("perf stat: Update walltime_nsecs_stats in interval mode")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200518131445.3745083-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf compilation fails for NO_LIBBPF=1 DEBUG=1 with:
$ make NO_LIBBPF=1 DEBUG=1
BUILD: Doing 'make -j8' parallel build
CC builtin-trace.o
LD perf-in.o
LINK perf
/usr/bin/ld: perf-in.o: in function `trace__find_bpf_map_by_name':
/home/jolsa/kernel/linux-perf/tools/perf/builtin-trace.c:4608: undefined reference to `bpf_object__find_map_by_name'
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile.perf:631: perf] Error 1
make[1]: *** [Makefile.perf:225: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
Move trace__find_bpf_map_by_name calls under HAVE_LIBBPF_SUPPORT ifdef
and add make test for this.
Committer notes:
Add missing:
run += make_no_libbpf_DEBUG
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200518141027.3765877-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow the CC compiler to accept a CFLAGS environment variable. This
doesn't change the code generated but makes it easier to integrate
running the shell script in build systems like bazel.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200306071110.130202-4-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the architecture test directory agree with the code comment.
Committer notes:
This was split from a larger patch.
The code was assuming the developer always worked from tools/perf/, so make sure we
do the test -d having $toolsdir/perf/arch/$arch, to match the intent expressed in the comment,
just above that loop.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200306071110.130202-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Break pmu-events test into 2 and add a test to verify that all pmu
metric expressions simply parse. Try to parse all metric ids/events,
skip/warn if metrics for the current architecture fail to parse. To
support warning for a skip, and an ability for a subtest to describe why
it skips.
Tested on power9, skylakex, haswell, broadwell, westmere, sandybridge and
ivybridge.
May skip/warn on other architectures if metrics are invalid. In
particular s390 is untested, but its expressions are trivial. The
untested architectures with expressions are power8, cascadelakex,
tremontx, skylake, jaketown, ivytown and variants of haswell and
broadwell.
v3. addresses review comments from John Garry <john.garry@huawei.com>,
Jiri Olsa <jolsa@redhat.com> and Arnaldo Carvalho de Melo
<acme@kernel.org>.
v2. changes the commit message as event parsing errors no longer cause
the test to fail.
Committer notes:
Check the return value of strtod() to fix the build in systems where
that function is declared with attribute warn_unused_result.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now subtests can inform why a test was skipped. The upcoming patch
improvint PMU event metric testing will use it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On a CPU like skylakex an uncore_iio_0 PMU may alias with
uncore_iio_free_running_0. The latter PMU doesn't support fc_mask as a
parameter and so pmu_config_term fails. Typically parse_events_add_pmu
is called in a loop where if one alias succeeds errors are ignored,
however, if multiple errors occur parse_events__handle_error will
currently give a WARN_ONCE.
This change removes the WARN_ONCE in parse_events__handle_error and
makes it a pr_debug. It adds verbose messages to parse_events_add_pmu
warning that non-fatal errors may occur, while giving details on the pmu
and config terms for useful context. pmu_config_term is altered so the
failing term and pmu are present in the case of the 'unknown term' error
which makes spotting the free_running case more straightforward.
Before:
$ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
Using CPUID GenuineIntel-6-55-4
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
WARNING: multiple event parsing errors
...
Invalid event/parameter 'fc_mask'
...
After:
$ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
Using CPUID GenuineIntel-6-55-4
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'uncore_iio_free_running_5' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_5' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Attempting to add event pmu 'uncore_iio_free_running_3' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_3' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Attempting to add event pmu 'uncore_iio_free_running_1' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_1' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Multiple errors dropping message: unknown term 'fc_mask' for pmu 'uncore_iio_free_running_3' (valid terms: event,umask,config,config1,config2,name,period,percore)
...
So before you see a 'WARNING: multiple event parsing errors' and
'Invalid event/parameter'. After you see 'Attempting... that may result
in non-fatal errors' then 'Multiple errors...' with details that
'fc_mask' wasn't known to a free running counter. While not completely
clean, this makes it clearer that an error hasn't really occurred.
v2. addresses review feedback from Jiri Olsa <jolsa@redhat.com>.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200513220635.54700-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a destructor for strings to reclaim memory in the event of errors.
Free the ID given for a lookup, it was previously strdup-ed in the lex
code.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513000318.15166-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7eec00a747 ("perf symbols: Consolidate symbol fixup issue")
removed powerpc specific sym-handling.c file from Build. This wasn't
caught by build CI because all functions in this file are declared
as __weak in common code. Fix it.
Fixes: 7eec00a747 ("perf symbols: Consolidate symbol fixup issue")
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200509112113.174745-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test for fix in:
commit 5741da3dee4c ("perf expr: Parse numbers as doubles")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513062752.3681-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The setting and checking of 'done' contains a rare race where the signal
handler setting 'done' is run after checking to break the loop, but
before waiting in evlist__poll(). In this case, the main loop won't wake
up until either another signal is sent, or the perf data fd causes a
wake up.
The following simple script can trigger this condition (but you might
need to run it for several hours):
for ((i = 0; i >= 0; i++)) ; do
echo "Loop $i"
delay=$(echo "scale=4; 0.1 * $RANDOM/32768" | bc)
./perf record -- sleep 30000000 >/dev/null&
pid=$!
sleep $delay
kill -TERM $pid
echo "PID $pid"
wait $pid
done
At some point, the loop will stall. Adding logging, even though perf has
received the SIGTERM and set 'done = 1', perf will remain sleeping until
a second signal is sent.
Committer notes:
Make this dependent on HAVE_EVENTFD_SUPPORT, so that we continue
building on older systems without the eventfd syscall.
Signed-off-by: Anand K Mistry <amistry@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200513122012.v3.1.I4d7421c6bbb1f83ea58419082481082e19097841@changeid
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be consistent with other such auto-detected features.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anand K Mistry <amistry@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like with the other fields, this probably isn't fixing anything
observable as evsel__new() uses zalloc() for the whole 'struct evsel',
but since evsels can be embedded in larger structures and maybe those
larger structures don't use zalloc() for some reason, init it to NULL
just in case.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If allocated, perf_pkg_mask and metric_events need freeing.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200512235918.10732-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When applying a patch by Ian I incorrectly converted to zfree() an
expression that involved testing some other struct member, not the one
being freed, which lead to bugs reproduceable by:
$ perf stat -e i/bs,tsc,L2/o sleep 1
WARNING: multiple event parsing errors
Segmentation fault (core dumped)
$
Fix it by restoring the test for pos->free_str before freeing
pos->val.str, but continue using zfree(&pos->val.str) to set that member
to NULL after freeing it.
Reported-by: Ian Rogers <irogers@google.com>
Fixes: e8dfb81838 ("perf parse-events: Fix memory leaks found on parse_events")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian reported that is_bpf_image is not working the way it was intended
- passing on trampolines and dispatcher names. Instead it returned true
for all the bpf names.
The reason even this logic worked properly is that all bpf objects, even
trampolines and dispatcher, were assigned DSO_BINARY_TYPE__BPF_IMAGE
binary_type.
The later for bpf_prog objects, the binary_type was fixed in bpf load
event processing, which is executed after the ksymbol code.
Fixing the is_bpf_image logic, so it properly recognizes trampoline and
dispatcher objects.
Fixes: 3c29d4483e ("perf annotate: Add basic support for bpf_image")
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200512122310.3154754-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the event is passed as list, the default events should be listed as
per 'perf mem record -e list'. Previous behavior is:
$ perf c2c record -e list
failed: event 'list' not found, use '-e list' to get list of available events
Usage: perf c2c record [<options>] [<command>]
or: perf c2c record [<options>] -- <command> [<options>]
-e, --event <event> event selector. Use 'perf mem record -e list' to list available events
$
New behavior:
$ perf c2c record -e list
ldlat-loads : available
ldlat-stores : available
v3: is a rebase.
v2: addresses review comments by Jiri Olsa.
https://lore.kernel.org/lkml/20191127081844.GH32367@krava/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200507220604.3391-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During the processing of /proc during event synthesis new processes may
start. Add a dummy event if /proc is to be processed, to capture mmaps
for starting processes. This reuses the existing logic for
initial-delay.
v3 fixes the attr test of test-record-C0
v2 fixes the dummy event configuration and a branch stack issue.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200422173615.59436-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A dummy event never triggers any actual counter and therefore cannot be
used with branch_stack
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200422173615.59436-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A big uncore event group is split into multiple small groups which only
include the uncore events from the same PMU. This has been supported in
the commit 3cdc5c2cb9 ("perf parse-events: Handle uncore event
aliases in small groups properly").
If the event's PMU name starts to repeat, it must be a new event.
That can be used to distinguish the leader from other members.
But now it only compares the pointer of pmu_name
(leader->pmu_name == evsel->pmu_name).
If we use "perf stat -M LLC_MISSES.PCIE_WRITE -a" on cascadelakex,
the event list is:
evsel->name evsel->pmu_name
---------------------------------------------------------------
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_4 (as leader)
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_2
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_0
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_5
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_3
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_1
unc_iio_data_req_of_cpu.mem_write.part1 uncore_iio_4
......
For the event "unc_iio_data_req_of_cpu.mem_write.part1" with
"uncore_iio_4", it should be the event from PMU "uncore_iio_4".
It's not a new leader for this PMU.
But if we use "(leader->pmu_name == evsel->pmu_name)", the check
would be failed and the event is stored to leaders[] as a new
PMU leader.
So this patch uses strcmp to compare the PMU name between events.
Fixes: d4953f7ef1 ("perf parse-events: Fix 3 use after frees found with clang ASAN")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200430003618.17002-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If an expression yields 0 and is then divided-by/modulus-by then the
parsing aborts. Add a debug error message to better enable debugging
when this happens.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mismatched parentheses.
Fixes: 7f3cf5ac77 (perf vendor events power9: Cpi_breakdown & estimated_dcache_miss_cpi metrics)
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Paul Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mismatched parentheses.
Fixes: dd81eafacc (perf vendor events power8: Cpi_breakdown & estimated_dcache_miss_cpi metrics)
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Paul Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only effects parser debugging (disabled by default). Enables displaying
'--accepting rule at line .. ("...").
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is expected in expr.y and metrics use floating point values such as
x86 broadwell IFetch_Line_Utilization.
Fixes: 26226a9772 (perf expr: Move expr lexer to flex)
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Large metrics such as Branch_Misprediction_Cost_SMT on x86 broadwell
need more space.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Corrects parse errors in expr__find_other of expressions with min.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove over escaping with \\.
Fixes: fd5500989c (perf vendor events intel: Update metrics from TMAM 3.5)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove over escaping with \\.
Remove extraneous if 1 if 0 == 1 else 0 else 0.
Fixes: fd5500989c (perf vendor events intel: Update metrics from TMAM 3.5)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current expression allows 2 escaped '-,=' characters. However, some
metrics require more, for example Haswell DRAM_BW_Use.
Fixes: 26226a9772 (perf expr: Move expr lexer to flex)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Callchains are automatically initialized by checking on event's
sample_type. For pipe mode we need to put this check into attr event
code.
Moving the callchains setup code into callchain_param_setup function and
calling it from attr event process code.
This enables pipe output having callchains, like:
# perf record -g -e 'raw_syscalls:sys_enter' true | perf script
# perf record -g -e 'raw_syscalls:sys_enter' true | perf report
Committer notes:
We still need the next patch for the above output to work.
Reported-by: Paul Khuong <pvk@pvk.ca>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian came with the idea of having support to read the pipe data also from
file. Currently pipe mode files fail like:
$ perf record -o - sleep 1 > /tmp/perf.pipe.data
$ perf report -i /tmp/perf.pipe.data
incompatible file format (rerun with -v to learn more)
This patch adds the support to do that by trying the pipe header first,
and if its successfully detected, switching the perf data to pipe mode.
Committer testing:
# ls
# perf record -a -o - sleep 1 > /tmp/perf.pipe.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# ls
# perf report -i /tmp/perf.pipe.data | head -25
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 511 of event 'cycles'
# Event count (approx.): 178447276
#
# Overhead Command Shared Object Symbol
# ........ ........ ................. ...........................................................................................
#
65.49% swapper [kernel.kallsyms] [k] native_safe_halt
6.45% chromium libblink_core.so [.] blink::SelectorChecker::CheckOne
4.08% chromium libblink_core.so [.] blink::SelectorQuery::ExecuteForTraverseRoot<blink::AllElementsSelectorQueryTrait>
2.25% chromium libblink_core.so [.] blink::SelectorQuery::FindTraverseRootsAndExecute<blink::AllElementsSelectorQueryTrait>
2.11% chromium libblink_core.so [.] blink::SelectorChecker::MatchSelector
1.91% chromium libblink_core.so [.] blink::Node::OwnerShadowHost
1.31% chromium libblink_core.so [.] blink::Node::parentNode@plt
1.22% chromium libblink_core.so [.] blink::Node::parentNode
0.59% chromium libblink_core.so [.] blink::AnyAttributeMatches
0.58% chromium libv8.so [.] v8::internal::GlobalHandles::Create
0.58% chromium libblink_core.so [.] blink::NodeTraversal::NextAncestorSibling
0.55% chromium libv8.so [.] v8::internal::RegExpGlobalCache::RegExpGlobalCache
0.55% chromium libblink_core.so [.] blink::Node::ContainingShadowRoot
0.55% chromium libblink_core.so [.] blink::NodeTraversal::NextAncestorSibling@plt
#
Original-patch-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Khuong <pvk@pvk.ca>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to set 'fd' position in pipe mode, the file descriptor
is already in proper place. Moreover the lseek will fail on pipe
descriptor and that's why it's been working properly.
I was tempted to remove the lseek calls completely, because it seems
that tracing data event was always synthesized only in pipe mode, so
there's no need for 'file' mode handling. But I guess there was a reason
behind this and there might (however unlikely) be a perf.data that we
could break processing for.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Khuong <pvk@pvk.ca>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even with fully built tree, we still display extra output when make is
invoked, like:
$ make
BUILD: Doing 'make -j8' parallel build
DESCEND plugins
make[3]: Nothing to be done for 'plugins/libtraceevent-dynamic-list'.
Changing the make descend directly to plugins directory, which quiets
those messages down.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Khuong <pvk@pvk.ca>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a probe point is expanded to several places (like inlined) and if
some of them are skipped because of blacklisted or __init function,
those trace_events has no event name. It must be skipped while showing
results.
Without this fix, you can see "(null):(null)" on the list,
# ./perf probe request_resource
reserve_setup is out of .text, skip it.
Added new events:
(null):(null) (on request_resource)
probe:request_resource (on request_resource)
You can now use it in all perf tools, such as:
perf record -e probe:request_resource -aR sleep 1
#
With this fix, it is ignored:
# ./perf probe request_resource
reserve_setup is out of .text, skip it.
Added new events:
probe:request_resource (on request_resource)
You can now use it in all perf tools, such as:
perf record -e probe:request_resource -aR sleep 1
#
Fixes: 5a51fcd1f3 ("perf probe: Skip kernel symbols which is out of .text")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763968263.30755.12800484151476026340.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 03db8b583d ("perf tools: Fix
maps__find_symbol_by_name()") introduced map address range check in
maps__find_symbol_by_name(), we can not get "_etext" from kernel map
because _etext is placed on the edge of the kernel .text section (=
kernel map in perf.)
To fix this issue, this checks the address correctness by map address
range information (map->start and map->end) instead of using _etext
address.
This can cause an error if the target inlined function is embedded in
both __init function and normal function.
For exaample, request_resource() is a normal function but also embedded
in __init reserve_setup(). In this case, the probe point in
reserve_setup() must be skipped.
However, without this fix, it failes to setup all probe points:
# ./perf probe -v request_resource
probe-definition(0): request_resource
symbol:request_resource file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux for symbols
Open Debuginfo file: /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux
Try to find probe point from debuginfo.
Matched function: request_resource [15e29ad]
found inline addr: 0xffffffff82fbf892
Probe point found: reserve_setup+204
found inline addr: 0xffffffff810e9790
Probe point found: request_resource+0
Found 2 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Opening /sys/kernel/debug/tracing//README write=0
Writing event: p:probe/request_resource _text+33290386
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
#
With this fix,
# ./perf probe request_resource
reserve_setup is out of .text, skip it.
Added new events:
(null):(null) (on request_resource)
probe:request_resource (on request_resource)
You can now use it in all perf tools, such as:
perf record -e probe:request_resource -aR sleep 1
#
Fixes: 03db8b583d ("perf tools: Fix maps__find_symbol_by_name()")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763967332.30755.4922496724365529088.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to check kprobe blacklist address correctly with relocated address
by adjusting debuginfo address.
Since the address in the debuginfo is same as objdump, it is different
from relocated kernel address with KASLR. Thus, 'perf probe' always
misses to catch the blacklisted addresses.
Without this patch, 'perf probe' can not detect the blacklist addresses
on a KASLR enabled kernel.
# perf probe kprobe_dispatcher
Failed to write event: Invalid argument
Error: Failed to add events.
#
With this patch, it correctly shows the error message.
# perf probe kprobe_dispatcher
kprobe_dispatcher is blacklisted function, skip it.
Probe point 'kprobe_dispatcher' not found.
Error: Failed to add events.
#
Fixes: 9aaf5a5f47 ("perf probe: Check kprobes blacklist when adding new events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763966411.30755.5882376357738273695.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the commit 6a13a0d7b4 ("ftrace/kprobe: Show the maxactive number
on kprobe_events") introduced to show the instance number of kretprobe
events, the length of the 1st format of the kprobe event will not 1, but
it can be longer. This caused a parser error in perf-probe.
Skip the length check the 1st format of the kprobe event to accept this
instance number.
Without this fix:
# perf probe -a vfs_read%return
Added new event:
probe:vfs_read__return (on vfs_read%return)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read__return -aR sleep 1
# perf probe -l
Semantic error :Failed to parse event name: r16:probe/vfs_read__return
Error: Failed to show event list.
And with this fixes:
# perf probe -a vfs_read%return
...
# perf probe -l
probe:vfs_read__return (on vfs_read%return)
Fixes: 6a13a0d7b4 ("ftrace/kprobe: Show the maxactive number on kprobe_events")
Reported-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Yuxuan Shui <yshuiv7@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207587
Link: http://lore.kernel.org/lkml/158877535215.26469.1113127926699134067.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a couple large ecmp group nexthop selftests to cover
the remnant fixed by d69100b8ee.
The tests create 100 x32 ecmp groups of ipv4 and ipv6 and then
dump them. On kernels without the fix, they will fail due
to data remnant during the dump.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To align with recent recommended values. Will be configurable by future
patches.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This cpupower for update for Linux 5.8-rc1 consists of a single
patch to fix coccicheck unneeded semicolon warning.
-----BEGIN PGP SIGNATURE-----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=cYtw
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for v5.8-rc1 from Shuah Khan:
"This cpupower update for Linux 5.8-rc1 consists of a single
patch to fix coccicheck unneeded semicolon warning."
* tag 'linux-cpupower-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Remove unneeded semicolon
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna
Bhowmik.
2) Nexthop attributes aren't being checked properly because of
mis-initialized iterator, from David Ahern.
3) Revert iop_idents_reserve() change as it caused performance
regressions and was just working around what is really a UBSAN bug
in the compiler. From Yuqi Jin.
4) Read MAC address properly from ROM in bmac driver (double iteration
proceeds past end of address array), from Jeremy Kerr.
5) Add Microsoft Surface device IDs to r8152, from Marc Payne.
6) Prevent reference to freed SKB in __netif_receive_skb_core(), from
Boris Sukholitko.
7) Fix ACK discard behavior in rxrpc, from David Howells.
8) Preserve flow hash across packet scrubbing in wireguard, from Jason
A. Donenfeld.
9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric
Dumazet.
10) Fix encryption error checking in kTLS code, from Vadim Fedorenko.
11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki.
12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet.
13) Fix use after free in mlxsw driver, from Jiri Pirko.
14) Order kTLS key destruction properly in mlx5 driver, from Tariq
Toukan.
15) Check devm_platform_ioremap_resource() return value properly in
several drivers, from Tiezhu Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: smsc911x: Fix runtime PM imbalance on error
net/mlx4_core: fix a memory leak bug.
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend
net: phy: mscc: fix initialization of the MACsec protocol mode
net: stmmac: don't attach interface until resume finishes
net: Fix return value about devm_platform_ioremap_resource()
net/mlx5: Fix error flow in case of function_setup failure
net/mlx5e: CT: Correctly get flow rule
net/mlx5e: Update netdev txq on completions during closure
net/mlx5: Annotate mutex destroy for root ns
net/mlx5: Don't maintain a case of del_sw_func being null
net/mlx5: Fix cleaning unmanaged flow tables
net/mlx5: Fix memory leak in mlx5_events_init
net/mlx5e: Fix inner tirs handling
net/mlx5e: kTLS, Destroy key object after destroying the TIS
net/mlx5e: Fix allowed tc redirect merged eswitch offload cases
net/mlx5: Avoid processing commands before cmdif is ready
net/mlx5: Fix a race when moving command interface to events mode
net/mlx5: Add command entry handling completion
rxrpc: Fix a memory leak in rxkad_verify_response()
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-05-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 8 day(s) which contain
a total of 109 files changed, 2776 insertions(+), 2887 deletions(-).
The main changes are:
1) Add a new AF_XDP buffer allocation API to the core in order to help
lowering the bar for drivers adopting AF_XDP support. i40e, ice, ixgbe
as well as mlx5 have been moved over to the new API and also gained a
small improvement in performance, from Björn Töpel and Magnus Karlsson.
2) Add getpeername()/getsockname() attach types for BPF sock_addr programs
in order to allow for e.g. reverse translation of load-balancer backend
to service address/port tuple from a connected peer, from Daniel Borkmann.
3) Improve the BPF verifier is_branch_taken() logic to evaluate pointers
being non-NULL, e.g. if after an initial test another non-NULL test on
that pointer follows in a given path, then it can be pruned right away,
from John Fastabend.
4) Larger rework of BPF sockmap selftests to make output easier to understand
and to reduce overall runtime as well as adding new BPF kTLS selftests
that run in combination with sockmap, also from John Fastabend.
5) Batch of misc updates to BPF selftests including fixing up test_align
to match verifier output again and moving it under test_progs, allowing
bpf_iter selftest to compile on machines with older vmlinux.h, and
updating config options for lirc and v6 segment routing helpers, from
Stanislav Fomichev, Andrii Nakryiko and Alan Maguire.
6) Conversion of BPF tracing samples outdated internal BPF loader to use
libbpf API instead, from Daniel T. Lee.
7) Follow-up to BPF kernel test infrastructure in order to fix a flake in
the XDP selftests, from Jesper Dangaard Brouer.
8) Minor improvements to libbpf's internal hashmap implementation, from
Ian Rogers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
test_lirc_mode2.sh assumes presence of /sys/class/rc/rc0/lirc*/uevent
which will not be present unless CONFIG_LIRC=y
Fixes: 6bdd533cee ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1590147389-26482-3-git-send-email-alan.maguire@oracle.com
test_seg6_loop.o uses the helper bpf_lwt_seg6_adjust_srh();
it will not be present if CONFIG_IPV6_SEG6_BPF is not specified.
Fixes: b061017f8b ("selftests/bpf: add realistic loop tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1590147389-26482-2-git-send-email-alan.maguire@oracle.com
Getting a clean BPF selftests run involves ensuring latest trunk LLVM/clang
are used, pahole is recent (>=1.16) and config matches the specified
config file as closely as possible. Add to bpf_devel_QA.rst and point
tools/testing/selftests/bpf/README.rst to it.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1590146674-25485-1-git-send-email-alan.maguire@oracle.com
Starting from iputils s20190709 (used in Fedora 31), arping does not
support timeout being specified as a decimal:
$ arping -c 1 -I swp1 -b 192.0.2.66 -q -w 0.1
arping: invalid argument: '0.1'
Previously, such timeouts were rounded to an integer.
Fix this by specifying the timeout as an integer.
Fixes: a5ee171d08 ("selftests: mlxsw: qos_mc_aware: Add a test for UC awareness")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable is used by log_test() to check if the test case completely
successfully or not. In case it is not initialized at the start of a
test case, it is possible for the test case to fail despite not
encountering any errors.
Example:
```
...
TEST: Trap group statistics [ OK ]
TEST: Trap policer [FAIL]
Policer drop counter was not incremented
TEST: Trap policer binding [FAIL]
Policer drop counter was not incremented
```
Failure of trap_policer_test() caused trap_policer_bind_test() to fail
as well.
Fix by adding missing initialization of the variable.
Fixes: 5fbff58e27 ("selftests: netdevsim: Add test cases for devlink-trap policers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To improve the usability of KUnit, defconfig is used
by default if no kunitconfig is present.
* https://bugzilla.kernel.org/show_bug.cgi?id=205259
Fixed up minor merge conflicts - Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-05-22
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 5 files changed, 69 insertions(+), 11 deletions(-).
The main changes are:
1) Fix to reject mmap()'ing read-only array maps as writable since BPF verifier
relies on such map content to be frozen, from Andrii Nakryiko.
2) Fix breaking audit from secid_to_secctx() LSM hook by avoiding to use
call_int_hook() since this hook is not stackable, from KP Singh.
3) Fix BPF flow dissector program ref leak on netns cleanup, from Jakub Sitnicki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds ipv4 and ipv6 fdb nexthop api tests to fib_nexthops.sh.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make KUnit easier to use, and to avoid overwriting object and
.config files, the default KUnit build directory is set to .kunit
* Related bug: https://bugzilla.kernel.org/show_bug.cgi?id=205221
Fixed up minor merge conflicts - Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This can happen if a testing node doesn't have RTC (real time clock)
hardware or it doesn't support alarms.
Fixes: 61c5767603 ("selftests/timens: Add Time Namespace test for supported clocks")
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
TPM2 tests set uses /dev/tpm0 and /dev/tpmrm0 without check if they
are available. In case, when these devices are not available test
fails, but expected behaviour is skipped test.
Signed-off-by: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The core mask display is wrong in some cases. This is showing more
cpus than the mask has. This is because mask is 64 bit but it used
with BIT() macro to get the presence of CPU which doesn't support
unsigned long long. Added a new macro for BIT_ULL and use that
to get the presence of a CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Increase CPU count so that more than 64 is supported in one request.
For example:
sudo ./intel-speed-select -d --cpu 0-66 core-power assoc -clos 0
The above command stops at 63. With this change, it can support more
CPU numbers from 0-255.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The 'intel-speed-select -f json perf-profile get-lock-status' command
outputs the package, die, and cpu data as separate fields.
ex)
"package-0": {
"die-0": {
"cpu-0": {
Commit 74062363f8 ("tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json") prettied this output so that it is a single line for
some json output commands and the same should be done for other commands.
Output package, die, and cpu info in a single line when using json output.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Provide a very basic selftest for getcpu() which similarly to our existing
test for gettimeofday() looks up the function in the vDSO and prints the
results it gets if the function exists and succeeds.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Both vdso_test_gettimeofday and vdso_standalone_test_x86 use the library in
parse_vdso.c but each separately declares the API it offers which is not
ideal. Create a header file with prototypes of the functions and use it in
both the library and the tests to ensure that the same prototypes are used
throughout.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the vDSO kselftests have a test called vdso_test which tests
the vDSO implementation of gettimeofday(). In preparation for adding
tests for other vDSO functionality rename this test to reflect what's
going on.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a named pipe as an exec target to make sure that non-regular
files are rejected by execve() with EACCES. This can help verify
commit 73601ea5b7 ("fs/open.c: allow opening only regular files
during execve()").
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Adding a printk to test_sk_lookup_kern created the reported failure
where a pointer type is checked twice for NULL. Lets add it to the
progs test test_sk_lookup_kern.c so we test the case from C all the
way into the verifier.
We already have printk's in selftests so seems OK to add another one.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159009170603.6313.1715279795045285176.stgit@john-Precision-5820-Tower
When we have pointer type that is known to be non-null we only follow
the non-null branch. This adds tests to cover the map_value pointer
returned from a map lookup. To force an error if both branches are
followed we do an ALU op on R10.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159009168650.6313.7434084136067263554.stgit@john-Precision-5820-Tower
When we have pointer type that is known to be non-null and comparing
against zero we only follow the non-null branch. This adds tests to
cover this case for reference tracking. Also add the other case when
comparison against a non-zero value and ensure we still fail with
unreleased reference.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159009166599.6313.1593680633787453767.stgit@john-Precision-5820-Tower
While working on commit b5372fe5dc ("exec: load_script: Do not exec
truncated interpreter path"), I wrote a series of test scripts to verify
corner cases. However, soon after, commit 6eb3c3d0a5 ("exec: increase
BINPRM_BUF_SIZE to 256") landed, resulting in the tests needing to be
refactored for the larger BINPRM_BUF_SIZE, which got lost on my TODO
list. During the recent exec refactoring work[1], the need for these tests
resurfaced, so I've finished them up for addition to the kernel selftests.
[1] https://lore.kernel.org/lkml/202005191144.E3112135@keescook/
Link: https://lkml.kernel.org/r/202005200204.D07DF079@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
gcc-10 switched to defaulting to -fno-common, which broke iproute2-5.4.
This was fixed in iproute-5.6, so switch to that. Because we're after a
stable testing surface, we generally don't like to bump these
unnecessarily, but in this case, being able to actually build is a basic
necessity.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in [0], it's dangerous to allow mapping BPF map, that's meant to
be frozen and is read-only on BPF program side, because that allows user-space
to actually store a writable view to the page even after it is frozen. This is
exacerbated by BPF verifier making a strong assumption that contents of such
frozen map will remain unchanged. To prevent this, disallow mapping
BPF_F_RDONLY_PROG mmap()'able BPF maps as writable, ever.
[0] https://lore.kernel.org/bpf/CAEf4BzYGWYhXdp6BJ7_=9OQPJxQpgug080MMjdSB72i9R+5c6g@mail.gmail.com/
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/bpf/20200519053824.1089415-1-andriin@fb.com
Objtool currently only compiles for x86 architectures. This is
fine as it presently does not support tooling for other
architectures. However, we would like to be able to convert other
kernel tools to run as objtool sub commands because they too
process ELF object files. This will allow us to convert tools
such as recordmcount to use objtool's ELF code.
Since much of recordmcount's ELF code is copy-paste code to/from
a variety of other kernel tools (look at modpost for example) this
means that if we can convert recordmcount we can convert more.
We define weak definitions for subcommand entry functions and other weak
definitions for shared functions critical to building existing
subcommands. These return 127 when the command is missing which signify
tools that do not exist on all architectures. In this case the "check"
and "orc" tools do not exist on all architectures so we only add them
for x86. Future changes adding support for "check", to arm64 for
example, can then modify the SUBCMD_CHECK variable when building for
arm64.
Objtool is not currently wired in to KConfig to be built for other
architectures because it's not needed for those architectures and
there are no commands it supports other than those for x86. As more
command support is enabled on various architectures the necessary
KConfig changes can be made (e.g. adding "STACK_VALIDATION") to
trigger building objtool.
[ jpoimboe: remove aliases, add __weak macro, add error messages ]
Cc: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The objtool_file structure describes the files objtool works on,
is used by the check subcommand, and the check.h header is included
by the orc subcommands so it's presently used by all subcommands.
Since the structure will be useful in all subcommands besides check,
and some subcommands may not want to include check.h to get the
definition, split the structure out into a new header meant for use
by all objtool subcommands.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
When the user requests help it's not an error so do not exit with
a non-zero exit code. This is not especially useful for a user but
any script that might wish to check that objtool --help is at least
available can't rely on the exit code to crudely check that, for
example, building an objtool executable succeeds.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
check_kcov_mode() is called by write_comp_data() and
__sanitizer_cov_trace_pc(), which are already on the uaccess safe list.
It's notrace and doesn't call out to anything else, so add it to the
list too.
This fixes the following warnings:
kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0x15: call to check_kcov_mode() with UACCESS enabled
kernel/kcov.o: warning: objtool: write_comp_data()+0x1b: call to check_kcov_mode() with UACCESS enabled
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Add summary lines of test cases and return an error
code if any test case fails so that tester don't have
to monitor the output.
Link: https://lkml.kernel.org/r/158898590533.22749.10269622752797822320.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The gen_kselftest_tar.sh always packages *all* selftests and doesn't
pass along any variables to `make install` to influence what should be
built. This can result in an early error on the command line ("Unknown
tarball format TARGETS=XXX"), or unexpected test failures as the
tarball contains tests people wanted to skip on purpose.
Since the makefile already contains all the logic, we can add a target
for packaging. Keep the default .gz target the script uses, and actually
extend the supported formats by using tar's autodetection.
To not break current workflows, keep the gen_kselftest_tar.sh script as
it is, with an added suggestion to use the makefile target instead.
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
b9f4c01f3e ("selftest/bpf: Make bpf_iter selftest compilable against old vmlinux.h")
missed the fact that bpf_iter_test_kern{3,4}.c are not just including
bpf_iter_test_kern_common.h and need similar bpf_iter_meta re-definition
explicitly.
Fixes: b9f4c01f3e ("selftest/bpf: Make bpf_iter selftest compilable against old vmlinux.h")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200519192341.134360-1-andriin@fb.com
Add some basic stand alone self tests for HMM.
The test program and shell scripts use the test_hmm.ko driver to exercise
HMM functionality in the kernel.
Link: https://lore.kernel.org/r/20200422195028.3684-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's good to be able to compile bpf_iter selftest even on systems that don't
have the very latest vmlinux.h, e.g., for libbpf tests against older kernels in
Travis CI. To that extent, re-define bpf_iter_meta and corresponding bpf_iter
context structs in each selftest. To avoid type clashes with vmlinux.h, rename
vmlinux.h's definitions to get them out of the way.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20200518234516.3915052-1-andriin@fb.com
Extend the existing connect_force_port test to assert get{peer,sock}name programs
as well. The workflow for e.g. IPv4 is as follows: i) server binds to concrete
port, ii) client calls getsockname() on server fd which exposes 1.2.3.4:60000 to
client, iii) client connects to service address 1.2.3.4:60000 binds to concrete
local address (127.0.0.1:22222) and remaps service address to a concrete backend
address (127.0.0.1:60123), iv) client then calls getsockname() on its own fd to
verify local address (127.0.0.1:22222) and getpeername() on its own fd which then
publishes service address (1.2.3.4:60000) instead of actual backend. Same workflow
is done for IPv6 just with different address/port tuples.
# ./test_progs -t connect_force_port
#14 connect_force_port:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/3343da6ad08df81af715a95d61a84fb4a960f2bf.1589841594.git.daniel@iogearbox.net
Make bpftool aware and add the new get{peer,sock}name attach types to its
cli, documentation and bash completion to allow attachment/detachment of
sock_addr programs there.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/9765b3d03e4c29210c4df56a9cc7e52f5f7bb5ef.1589841594.git.daniel@iogearbox.net
Trivial patch to add the new get{peer,sock}name attach types to the section
definitions in order to hook them up to sock_addr cgroup program type.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/7fcd4b1e41a8ebb364754a5975c75a7795051bd2.1589841594.git.daniel@iogearbox.net
As stated in 983695fa67 ("bpf: fix unconnected udp hooks"), the objective
for the existing cgroup connect/sendmsg/recvmsg/bind BPF hooks is to be
transparent to applications. In Cilium we make use of these hooks [0] in
order to enable E-W load balancing for existing Kubernetes service types
for all Cilium managed nodes in the cluster. Those backends can be local
or remote. The main advantage of this approach is that it operates as close
as possible to the socket, and therefore allows to avoid packet-based NAT
given in connect/sendmsg/recvmsg hooks we only need to xlate sock addresses.
This also allows to expose NodePort services on loopback addresses in the
host namespace, for example. As another advantage, this also efficiently
blocks bind requests for applications in the host namespace for exposed
ports. However, one missing item is that we also need to perform reverse
xlation for inet{,6}_getname() hooks such that we can return the service
IP/port tuple back to the application instead of the remote peer address.
The vast majority of applications does not bother about getpeername(), but
in a few occasions we've seen breakage when validating the peer's address
since it returns unexpectedly the backend tuple instead of the service one.
Therefore, this trivial patch allows to customise and adds a getpeername()
as well as getsockname() BPF cgroup hook for both IPv4 and IPv6 in order
to address this situation.
Simple example:
# ./cilium/cilium service list
ID Frontend Service Type Backend
1 1.2.3.4:80 ClusterIP 1 => 10.0.0.10:80
Before; curl's verbose output example, no getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (10.0.0.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
After; with getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (1.2.3.4) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
Originally, I had both under a BPF_CGROUP_INET{4,6}_GETNAME type and exposed
peer to the context similar as in inet{,6}_getname() fashion, but API-wise
this is suboptimal as it always enforces programs having to test for ctx->peer
which can easily be missed, hence BPF_CGROUP_INET{4,6}_GET{PEER,SOCK}NAME split.
Similarly, the checked return code is on tnum_range(1, 1), but if a use case
comes up in future, it can easily be changed to return an error code instead.
Helper and ctx member access is the same as with connect/sendmsg/etc hooks.
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/61a479d759b2482ae3efb45546490bacd796a220.1589841594.git.daniel@iogearbox.net
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into objtool/core, to pick up fixes and resolve semantic conflict
Resolve structural conflict between:
59566b0b622e: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up")
which introduced a new reference to 'ftrace_epilogue', and:
0298739b7983: ("x86,ftrace: Fix ftrace_regs_caller() unwind")
Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'pref medium' attribute was moved in iproute2 to be near the prefix
which is where it applies versus after the last nexthop. The nexthop
tests were updated to drop the string from route checking, but it crept
in again with the compat tests.
Fixes: 4dddb5be13 ("selftests: net: add new testcases for nexthop API compat mode sysctl")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be derived dynamically from the trap's name, so drop it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One blank line is enough.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bugs, mostly for AMD processors. And a few other x86 fixes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6/0xcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOZuwf/bQZw/SP9awLjOOVsRaSWUmwRGD4q
6KVq9+JYsPU4CyJ7P+vdsFF39a0ixoAnKWqRe/vsXdXZrdYCDUuQxh+7X+lmjKAb
dCQBnoqxI0w3yuxrm9Kn6Xs1AGIWibaRlZnXUKbuyn4ecFrh08OfYKGkYsEovhxK
G4ftY4/xyM7Qvm0fq7ZmzxPrkzd74HDZBvB83R6uiyPiX3w4O9qumqkUogcVXIJX
l3mnvSPClDDX4FOr8uhnU93varuR7Bek4Fh+Abj4uNks/F3z9ooJO9Hy9E+V5fhY
g6Oj2IrxDwJ2G6hqyucr1kujukJC1bX2nMZ1O4gNayXsxZEU/JtI0Y26SA==
=EzBt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
Until now we have only had minimal ktls+sockmap testing when being
used with helpers and different sendmsg/sendpage patterns. Add a
pass with ktls here.
To run just ktls tests,
$ ./test_sockmap --whitelist="ktls"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939736278.15176.5435314315563203761.stgit@john-Precision-5820-Tower
This adds a blacklist to test_sockmap. For example, now we can run
all apply and cork tests except those with timeouts by doing,
$ ./test_sockmap --whitelist "apply,cork" --blacklist "hang"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939734350.15176.6643981099665208826.stgit@john-Precision-5820-Tower
Allow running specific tests with a comma deliminated whitelist. For example
to run all apply and cork tests.
$ ./test_sockmap --whitelist="cork,apply"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939732464.15176.1959113294944564542.stgit@john-Precision-5820-Tower
At the moment test_sockmap runs all 800+ tests ungrouped which is not
ideal because it makes it hard to see what is failing but also more
importantly its hard to confirm all cases are tested. Additionally,
after inspecting we noticed the runtime is bloated because we run
many duplicate tests. Worse some of these tests are known error cases
that wait for the recvmsg handler to timeout which creats long delays.
Also we noted some tests were not clearing their options and as a
result the following tests would run with extra and incorrect options.
Fix this by reorganizing test code so its clear what tests are running
and when. Then it becomes easy to remove duplication and run tests with
only the set of send/recv patterns that are relavent.
To accomplish this break test_sockmap into subtests and remove
unnecessary duplication. The output is more readable now and
the runtime reduced.
Now default output prints subtests like this,
$ ./test_sockmap
# 1/ 6 sockmap:txmsg test passthrough:OK
...
#22/ 1 sockhash:txmsg test push/pop data:OK
Pass: 22 Fail: 0
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939728384.15176.13601520183665880762.stgit@john-Precision-5820-Tower
The recv thread in test_sockmap waits to receive all bytes from sender but
in the case we use pop data it may wait for more bytes then actually being
sent. This stalls the test harness for multiple seconds. Because this
happens in multiple tests it slows time to run the selftest.
Fix by doing a better job of accounting for total bytes when pop helpers
are used.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939726542.15176.5964532245173539540.stgit@john-Precision-5820-Tower
Running test_sockmap with arguments to specify a test pattern requires
including a cgroup argument. Instead of requiring this if the option is
not provided create one
This is not used by selftest runs but I use it when I want to test a
specific test. Most useful when developing new code and/or tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939722675.15176.6294210959489131688.stgit@john-Precision-5820-Tower
The prints in the test_sockmap programs were only useful when we
didn't have enough control over test infrastructure to know from
user program what was being pushed into kernel side.
Now that we have or will shortly have better test controls lets
remove the printers. This means we can remove half the programs
and cleanup bpf side.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939720756.15176.9806965887313279429.stgit@john-Precision-5820-Tower
There is a much higher chance we can see the regressions if the
test is part of test_progs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-2-sdf@google.com
Commit 294f2fc6da ("bpf: Verifer, adjust_scalar_min_max_vals to always
call update_reg_bounds()") changed the way verifier logs some of its state,
adjust the test_align accordingly. Where possible, I tried to not copy-paste
the entire log line and resorted to dropping the last closing brace instead.
Fixes: 294f2fc6da ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-1-sdf@google.com
Fixes the following warnings:
hashmap.c: In function ‘hashmap__clear’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
hashmap.c: In function ‘hashmap_grow’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200515165007.217120-4-irogers@google.com
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
This Kselftest update for Linux 5.7-rc6 consists of
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
-----BEGIN PGP SIGNATURE-----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=2cqI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
* tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/lkdtm: Use grep -E instead of egrep
selftests/lkdtm: Don't clear dmesg when running tests
selftests/ftrace: mark irqsoff_tracer.tc test as unresolved if the test module does not exist
tools/testing: Replace zero-length array with flexible-array
kselftests: dmabuf-heaps: Fix confused return value on expected error testing
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) Fix secid_to_secctx LSM hook default value, from Anders.
2) Fix bug in mmap of bpf array, from Andrii.
3) Restrict bpf_probe_read to archs where they work, from Daniel.
4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 1 day(s) which contain
a total of 67 files changed, 741 insertions(+), 252 deletions(-).
The main changes are:
1) bpf_xdp_adjust_tail() now allows to grow the tail as well, from Jesper.
2) bpftool can probe CONFIG_HZ, from Daniel.
3) CAP_BPF is introduced to isolate user processes that use BPF infra and
to secure BPF networking services by dropping CAP_SYS_ADMIN requirement
in certain cases, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
"$err" is a variable pointing to a temp file. "$out" is not: only used
as a local variable in "check()" and representing the output of a
command line.
Fixes: eedbc68532 (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement two basic tests to verify terse dump functionality of flower
classifier:
- Test that verifies that terse dump works.
- Test that verifies that terse dump doesn't print filter key.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Cilium we've recently switched to make use of bpf_jiffies64() for
parts of our tc and XDP datapath since bpf_ktime_get_ns() is more
expensive and high-precision is not needed for our timeouts we have
anyway. Our agent has a probe manager which picks up the json of
bpftool's feature probe and we also use the macro output in our C
programs e.g. to have workarounds when helpers are not available on
older kernels.
Extend the kernel config info dump to also include the kernel's
CONFIG_HZ, and rework the probe_kernel_image_config() for allowing a
macro dump such that CONFIG_HZ can be propagated to BPF C code as a
simple define if available via config. Latter allows to have _compile-
time_ resolution of jiffies <-> sec conversion in our code since all
are propagated as known constants.
Given we cannot generally assume availability of kconfig everywhere,
we also have a kernel hz probe [0] as a fallback. Potentially, bpftool
could have an integrated probe fallback as well, although to derive it,
we might need to place it under 'bpftool feature probe full' or similar
given it would slow down the probing process overall. Yet 'full' doesn't
fit either for us since we don't want to pollute the kernel log with
warning messages from bpf_probe_write_user() and bpf_trace_printk() on
agent startup; I've left it out for the time being.
[0] https://github.com/cilium/cilium/blob/master/bpf/cilium-probe-kernel-hz.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200513075849.20868-1-daniel@iogearbox.net
Instead of iterating through all instructions to find the last
instruction each time .rela.discard.(un)reachable points beyond the
section, use find_insn to locate the last instruction by looking at
the last bytes of the section instead.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421220843.188260-3-samitolvanen@google.com
Currently, objtool fails to load the correct section for symbols when
the index is greater than SHN_LORESERVE. Use gelf_getsymshndx instead
of gelf_getsym to handle >64k sections.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200421220843.188260-2-samitolvanen@google.com
Randy reported a false-positive:
arch/x86/hyperv/hv_apic.o: warning: objtool: hv_apic_write()+0x25: alternative modifies stack
What happens is that:
alternative_io("movl %0, %P1", "xchgl %0, %P1", X86_BUG_11AP,
13d: 89 9d 00 d0 7f ff mov %ebx,-0x803000(%rbp)
decodes to an instruction with CFI-ops because it modifies RBP.
However, due to this being a !frame-pointer build, that should not in
fact change the CFI state.
So instead of dis-allowing any CFI-op, verify the op would've actually
changed the CFI state.
Fixes: 7117f16bf4 ("objtool: Fix ORC vs alternatives")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Extend BPF selftest xdp_adjust_tail with grow tail tests, which is added
as subtest's. The first grow test stays in same form as original shrink
test. The second grow test use the newer bpf_prog_test_run_xattr() calls,
and does extra checking of data contents.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945350567.97035.9632611946765811876.stgit@firesoul
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-14
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Merged tag 'perf-for-bpf-2020-05-06' from tip tree that includes CAP_PERFMON.
2) support for narrow loads in bpf_sock_addr progs and additional
helpers in cg-skb progs, from Andrey.
3) bpf benchmark runner, from Andrii.
4) arm and riscv JIT optimizations, from Luke.
5) bpf iterator infrastructure, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is based on the count_instructions test.
However this one also counts the number of failed stcx's, and in
conjunction with knowing the size of the stcx loop, can calculate the
total number of instructions executed even in the face of
non-deterministic stcx failures.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426114410.3917383-1-mpe@ellerman.id.au
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507185755.GA15014@embeddedor
It's not very nice to zero trap for this, because then system calls no
longer have trap_is_syscall(regs) invariant, and we can't distinguish
between sc and scv system calls (in a later patch).
Take one last unused bit from the low bits of the pt_regs.trap word
for this instead. There is not a really good reason why it should be
in trap as opposed to another field, but trap has some concept of
flags and it exists. Ideally I think we would move trap to 2-byte
field and have 2 more bytes available independently.
Add a selftests case for this, which can be seen to fail if
trap_norestart() is changed to return false.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make them static inlines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-4-mpe@ellerman.id.au
Test bpf_sk_lookup_tcp, bpf_sk_release, bpf_sk_cgroup_id and
bpf_sk_ancestor_cgroup_id helpers from cgroup skb program.
The test creates a testing cgroup, starts a TCPv6 server inside the
cgroup and creates two client sockets: one inside testing cgroup and one
outside.
Then it attaches cgroup skb program to the cgroup that checks all TCP
segments coming to the server and allows only those coming from the
cgroup of the server. If a segment comes from a peer outside of the
cgroup, it'll be dropped.
Finally the test checks that client from inside testing cgroup can
successfully connect to the server, but client outside the cgroup fails
to connect by timeout.
The main goal of the test is to check newly introduced
bpf_sk_{,ancestor_}cgroup_id helpers.
It also checks a couple of socket lookup helpers (tcp & release), but
lookup helpers were introduced much earlier and covered by other tests.
Here it's mostly checked that they can be called from cgroup skb.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/171f4c5d75e8ff4fe1c4e8c1c12288b5240a4549.1589486450.git.rdna@fb.com
Add two new network helpers.
connect_fd_to_fd connects an already created client socket fd to address
of server fd. Sometimes it's useful to separate client socket creation
and connecting this socket to a server, e.g. if client socket has to be
created in a cgroup different from that of server cgroup.
Additionally connect_to_fd is now implemented using connect_fd_to_fd,
both helpers don't treat EINPROGRESS as an error and let caller decide
how to proceed with it.
connect_wait is a helper to work with non-blocking client sockets so
that if connect_to_fd or connect_fd_to_fd returned -1 with errno ==
EINPROGRESS, caller can wait for connect to finish or for connection
timeout. The helper returns -1 on error, 0 on timeout (1sec,
hard-coded), and positive number on success.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1403fab72300f379ca97ead4820ae43eac4414ef.1589486450.git.rdna@fb.com
With having ability to lookup sockets in cgroup skb programs it becomes
useful to access cgroup id of retrieved sockets so that policies can be
implemented based on origin cgroup of such socket.
For example, a container running in a cgroup can have cgroup skb ingress
program that can lookup peer socket that is sending packets to a process
inside the container and decide whether those packets should be allowed
or denied based on cgroup id of the peer.
More specifically such ingress program can implement intra-host policy
"allow incoming packets only from this same container and not from any
other container on same host" w/o relying on source IP addresses since
quite often it can be the case that containers share same IP address on
the host.
Introduce two new helpers for this use-case: bpf_sk_cgroup_id() and
bpf_sk_ancestor_cgroup_id().
These helpers are similar to existing bpf_skb_{,ancestor_}cgroup_id
helpers with the only difference that sk is used to get cgroup id
instead of skb, and share code with them.
See documentation in UAPI for more details.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/f5884981249ce911f63e9b57ecd5d7d19154ff39.1589486450.git.rdna@fb.com
bpf_sock_addr.user_port supports only 4-byte load and it leads to ugly
code in BPF programs, like:
volatile __u32 user_port = ctx->user_port;
__u16 port = bpf_ntohs(user_port);
Since otherwise clang may optimize the load to be 2-byte and it's
rejected by verifier.
Add support for 1- and 2-byte loads same way as it's supported for other
fields in bpf_sock_addr like user_ip4, msg_src_ip4, etc.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/c1e983f4c17573032601d0b2b1f9d1274f24bc16.1589420814.git.rdna@fb.com
Clean up after recent fixes, move address calculations
around and change the variable init, so that we can have
just one start_offset == end_offset check.
Make the check a little stricter to preserve the -EINVAL
error if requested start offset is larger than the region
itself.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few fentry/fexit programs returning non-0.
The tests with these programs will break with the previous
patch which enfoced return-0 rules. Fix them properly.
Fixes: ac065870d9 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com
Flower tests used to create ingress filter with specified parent qdisc
"parent ffff:" but dump them on "ingress". With recent commit that fixed
tcm_parent handling in dump those are not considered same parent anymore,
which causes iproute2 tc to emit additional "parent ffff:" in first line of
filter dump output. The change in output causes filter match in tests to
fail.
Prevent parent qdisc output when dumping filters in flower tests by always
correctly specifying "ingress" parent both when creating and dumping
filters.
Fixes: a7df4870d7 ("net_sched: fix tcm_parent in tc filter dump")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mmap() subsystem allows user-space application to memory-map region with
initial page offset. This wasn't taken into account in initial implementation
of BPF array memory-mapping. This would result in wrong pages, not taking into
account requested page shift, being memory-mmaped into user-space. This patch
fixes this gap and adds a test for such scenario.
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com
Constants of the *_ALL type can be actively harmful due to the fact that
developers will usually fail to consider the possible effects of future
changes to the definition.
Deprecate STATX_ALL in the uapi, while no damage has been done yet.
We could keep something like this around in the kernel, but there's
actually no point, since all filesystems should be explicitly checking
flags that they support and not rely on the VFS masking unknown ones out: a
flag could be known to the VFS, yet not known to the filesystem.
Cc: David Howells <dhowells@redhat.com>
Cc: linux-api@vger.kernel.org
Cc: linux-man@vger.kernel.org
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is to be consistent with tracing and lsm programs
which have prefix "bpf_trace_" and "bpf_lsm_" respectively.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180216.2949387-1-yhs@fb.com
Commit 6879c042e1 ("tools/bpf: selftests: Add bpf_iter selftests")
added self tests for bpf_iter feature. But two subtests
ipv6_route and netlink needs llvm latest 10.x release branch
or trunk due to a bug in llvm BPF backend. This patch added
the file README.rst to document these two failures
so people using llvm 10.0.0 can be aware of them.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200513180215.2949237-1-yhs@fb.com
It is sometimes desirable to be able to trigger BPF program from user-space
with minimal overhead. sys_enter would seem to be a good candidate, yet in
a lot of cases there will be a lot of noise from syscalls triggered by other
processes on the system. So while searching for low-overhead alternative, I've
stumbled upon getpgid() syscall, which seems to be specific enough to not
suffer from accidental syscall by other apps.
This set of benchmarks compares tp, raw_tp w/ filtering by syscall ID, kprobe,
fentry and fmod_ret with returning error (so that syscall would not be
executed), to determine the lowest-overhead way. Here are results on my
machine (using benchs/run_bench_trigger.sh script):
base : 9.200 ± 0.319M/s
tp : 6.690 ± 0.125M/s
rawtp : 8.571 ± 0.214M/s
kprobe : 6.431 ± 0.048M/s
fentry : 8.955 ± 0.241M/s
fmodret : 8.903 ± 0.135M/s
So it seems like fmodret doesn't give much benefit for such lightweight
syscall. Raw tracepoint is pretty decent despite additional filtering logic,
but it will be called for any other syscall in the system, which rules it out.
Fentry, though, seems to be adding the least amoung of overhead and achieves
97.3% of performance of baseline no-BPF-attached syscall.
Using getpgid() seems to be preferable to set_task_comm() approach from
test_overhead, as it's about 2.35x faster in a baseline performance.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-5-andriin@fb.com
Add fmod_ret BPF program to existing test_overhead selftest. Also re-implement
user-space benchmarking part into benchmark runner to compare results. Results
with ./bench are consistently somewhat lower than test_overhead's, but relative
performance of various types of BPF programs stay consisten (e.g., kretprobe is
noticeably slower). This slowdown seems to be coming from the fact that
test_overhead is single-threaded, while benchmark always spins off at least
one thread for producer. This has been confirmed by hacking multi-threaded
test_overhead variant and also single-threaded bench variant. Resutls are
below. run_bench_rename.sh script from benchs/ subdirectory was used to
produce results for ./bench.
Single-threaded implementations
===============================
/* bench: single-threaded, atomics */
base : 4.622 ± 0.049M/s
kprobe : 3.673 ± 0.052M/s
kretprobe : 2.625 ± 0.052M/s
rawtp : 4.369 ± 0.089M/s
fentry : 4.201 ± 0.558M/s
fexit : 4.309 ± 0.148M/s
fmodret : 4.314 ± 0.203M/s
/* selftest: single-threaded, no atomics */
task_rename base 4555K events per sec
task_rename kprobe 3643K events per sec
task_rename kretprobe 2506K events per sec
task_rename raw_tp 4303K events per sec
task_rename fentry 4307K events per sec
task_rename fexit 4010K events per sec
task_rename fmod_ret 3984K events per sec
Multi-threaded implementations
==============================
/* bench: multi-threaded w/ atomics */
base : 3.910 ± 0.023M/s
kprobe : 3.048 ± 0.037M/s
kretprobe : 2.300 ± 0.015M/s
rawtp : 3.687 ± 0.034M/s
fentry : 3.740 ± 0.087M/s
fexit : 3.510 ± 0.009M/s
fmodret : 3.485 ± 0.050M/s
/* selftest: multi-threaded w/ atomics */
task_rename base 3872K events per sec
task_rename kprobe 3068K events per sec
task_rename kretprobe 2350K events per sec
task_rename raw_tp 3731K events per sec
task_rename fentry 3639K events per sec
task_rename fexit 3558K events per sec
task_rename fmod_ret 3511K events per sec
/* selftest: multi-threaded, no atomics */
task_rename base 3945K events per sec
task_rename kprobe 3298K events per sec
task_rename kretprobe 2451K events per sec
task_rename raw_tp 3718K events per sec
task_rename fentry 3782K events per sec
task_rename fexit 3543K events per sec
task_rename fmod_ret 3526K events per sec
Note that the fact that ./bench benchmark always uses atomic increments for
counting, while test_overhead doesn't, doesn't influence test results all that
much.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-4-andriin@fb.com
While working on BPF ringbuf implementation, testing, and benchmarking, I've
developed a pretty generic and modular benchmark runner, which seems to be
generically useful, as I've already used it for one more purpose (testing
fastest way to trigger BPF program, to minimize overhead of in-kernel code).
This patch adds generic part of benchmark runner and sets up Makefile for
extending it with more sets of benchmarks.
Benchmarker itself operates by spinning up specified number of producer and
consumer threads, setting up interval timer sending SIGALARM signal to
application once a second. Every second, current snapshot with hits/drops
counters are collected and stored in an array. Drops are useful for
producer/consumer benchmarks in which producer might overwhelm consumers.
Once test finishes after given amount of warm-up and testing seconds, mean and
stddev are calculated (ignoring warm-up results) and is printed out to stdout.
This setup seems to give consistent and accurate results.
To validate behavior, I added two atomic counting tests: global and local.
For global one, all the producer threads are atomically incrementing same
counter as fast as possible. This, of course, leads to huge drop of
performance once there is more than one producer thread due to CPUs fighting
for the same memory location.
Local counting, on the other hand, maintains one counter per each producer
thread, incremented independently. Once per second, all counters are read and
added together to form final "counting throughput" measurement. As expected,
such setup demonstrates linear scalability with number of producers (as long
as there are enough physical CPU cores, of course). See example output below.
Also, this setup can nicely demonstrate disastrous effects of false sharing,
if care is not taken to take those per-producer counters apart into
independent cache lines.
Demo output shows global counter first with 1 producer, then with 4. Both
total and per-producer performance significantly drop. The last run is local
counter with 4 producers, demonstrating near-perfect scalability.
$ ./bench -a -w1 -d2 -p1 count-global
Setting up benchmark 'count-global'...
Benchmark 'count-global' started.
Iter 0 ( 24.822us): hits 148.179M/s (148.179M/prod), drops 0.000M/s
Iter 1 ( 37.939us): hits 149.308M/s (149.308M/prod), drops 0.000M/s
Iter 2 (-10.774us): hits 150.717M/s (150.717M/prod), drops 0.000M/s
Iter 3 ( 3.807us): hits 151.435M/s (151.435M/prod), drops 0.000M/s
Summary: hits 150.488 ± 1.079M/s (150.488M/prod), drops 0.000 ± 0.000M/s
$ ./bench -a -w1 -d2 -p4 count-global
Setting up benchmark 'count-global'...
Benchmark 'count-global' started.
Iter 0 ( 60.659us): hits 53.910M/s ( 13.477M/prod), drops 0.000M/s
Iter 1 (-17.658us): hits 53.722M/s ( 13.431M/prod), drops 0.000M/s
Iter 2 ( 5.865us): hits 53.495M/s ( 13.374M/prod), drops 0.000M/s
Iter 3 ( 0.104us): hits 53.606M/s ( 13.402M/prod), drops 0.000M/s
Summary: hits 53.608 ± 0.113M/s ( 13.402M/prod), drops 0.000 ± 0.000M/s
$ ./bench -a -w1 -d2 -p4 count-local
Setting up benchmark 'count-local'...
Benchmark 'count-local' started.
Iter 0 ( 23.388us): hits 640.450M/s (160.113M/prod), drops 0.000M/s
Iter 1 ( 2.291us): hits 605.661M/s (151.415M/prod), drops 0.000M/s
Iter 2 ( -6.415us): hits 607.092M/s (151.773M/prod), drops 0.000M/s
Iter 3 ( -1.361us): hits 601.796M/s (150.449M/prod), drops 0.000M/s
Summary: hits 604.849 ± 2.739M/s (151.212M/prod), drops 0.000 ± 0.000M/s
Benchmark runner supports setting thread affinity for producer and consumer
threads. You can use -a flag for default CPU selection scheme, where first
consumer gets CPU #0, next one gets CPU #1, and so on. Then producer threads
pick up next CPU and increment one-by-one as well. But user can also specify
a set of CPUs independently for producers and consumers with --prod-affinity
1,2-10,15 and --cons-affinity <set-of-cpus>. The latter allows to force
producers and consumers to share same set of CPUs, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-3-andriin@fb.com
Add testing_helpers.c, which will contain generic helpers for test runners and
tests needing some common generic functionality, like parsing a set of
numbers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-2-andriin@fb.com
This is basically a test-suite for setns() and as of now contains:
- test that we can't pass garbage flags
- test that we can't attach to the namespaces of task that has already exited
- test that we can incrementally setns into all namespaces of a target task
using a pidfd
- test that we can setns atomically into all namespaces of a target task
- test that we can't cross setns into a user namespace outside of our user
namespace hierarchy
- test that we can't setns into namespaces owned by user namespaces over which
we are not privileged
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200505140432.181565-4-christian.brauner@ubuntu.com
When the probe code was failing for any reason ENOTSUP was returned, even
if this was due to not having enough lock space. This patch fixes this by
returning EPERM to the user application, so it can respond and increase
the RLIMIT_MEMLOCK size.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/158927424896.2342.10402475603585742943.stgit@ebuild
Before commit 74b5a5968f ("selftests/bpf: Replace test_progs and
test_maps w/ general rule") selftests/bpf used generic install
target from selftests/lib.mk to install generated bpf test progs
by mentioning them in TEST_GEN_FILES variable.
Take that functionality back.
Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513021722.7787-1-yauheni.kaliuta@redhat.com
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to return
a positive number on success, when it should have returned zero.
- The preempt_irq_delay_thread fix to make the creation code
wait for the kthread to finish to prevent it from executing after
module unload, can now cause the kthread to exit before it even
executes (preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not
on the command line.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXrq2ehQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrdjAQDGNaJa7Ft13KTDTNTioKmOorOi38vF
ava4E3uBHl3StQD/anJmVq7Kk4WJFKGYemV6usbjDqy510PCFu/VQ1AbGQc=
=hJvk
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fixes to previous fixes.
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to
return a positive number on success, when it should have returned
zero.
- The preempt_irq_delay_thread fix to make the creation code wait for
the kthread to finish to prevent it from executing after module
unload, can now cause the kthread to exit before it even executes
(preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not on
the command line"
* tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix to prevent warning message if no bootconfig option
tracing: Wait for preempt irq delay thread to execute
tools/bootconfig: Fix apply_xbc() to return zero on success
Daniel Borkmann