Add dma-channel-mask as a property for k3dma, it defines
available dma channels which a non-secure mode driver can use.
One sample usage of this is in Hi3660 SoC. DMA channel 0 is
reserved to lpm3, which is a coprocessor for power management. So
as a result, any request in kernel (which runs on main processor
and in non-secure mode) should start from at least channel 1.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Li Yu <liyu65@hisilicon.com>
[jstultz: Reworked to use a channel mask]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Axi_config controls whether DMA resources can be accessed in non-secure
mode, such as linux kernel. The register should be set by the bootloader
stage and depends on the device.
Thus, this patch removes axi_config from k3dma driver.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: dmaengine@vger.kernel.org
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Li Yu <liyu65@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
[jstultz: Minor tweaks to commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On the hi3660 hardware there are two (at least) DMA controllers,
the DMA-P (Peripheral DMA) and the DMA-A (Audio DMA). The
two blocks are similar, but have some slight differences. This
resulted in the vendor implementing two separate drivers, which
after review, they have been able to condense and re-use the
existing k3dma driver.
Thus, this patch adds support for the new "hisi-pcm-asp-dma-1.0"
compatible string in the binding.
One difference with the DMA-A controller, is that it does not
need to initialize a clock. So we skip this by adding and using
soc data flags.
After above this driver will support both k3 and hisi_asp dma
hardware.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: dmaengine@vger.kernel.org
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Youlin Wang <wwx575822@notesmail.huawei.com>
Signed-off-by: Tanglei Han <hantanglei@huawei.com>
[jstultz: Reworked to use of_match_data, commit msg improvements]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Memcpy has no direction (copy from memory to memory) so remove the check
in prep_memcpy()
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The d->chans[] array has d->dma_requests elements so the > should be
>= here.
Fixes: 8e6152bc66 ("dmaengine: Add hisilicon k3 DMA engine driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To avoid race with vchan_complete, use the race free way to terminate
running transfer.
Implement the device_synchronize callback to make sure that the terminated
descriptor is freed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit 36387a2b1f ("k3dma: Fix
memory handling in preparation for cyclic mode") adds few
calls to ON_WARN_ONCE() to track the use of ds_run/ds_done.
After the two fixes:
- dmaengine: k3dma: fix non-cyclic mode
- dmaengine: k3dma: fix re-free of the same descriptor
the behaviour of ds_run/ds_done is properly fixed.
The remaining ON_WARN_ONCE() are never triggered and can be
removed.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit 36387a2b1f ("k3dma: Fix
memory handling in preparation for cyclic mode") adds code
to free the descriptor in ds_done.
In cyclic mode, ds_done is never used and it's always NULL,
so the added code is not executed.
In non-cyclic mode, ds_done is used as a flag: when not NULL
it signals that the descriptor has been consumed. No need to
free it because it would be free by vchan_complete().
The fix takes back the code changed by the commit above:
- remove the free on the descriptor;
- initialize ds_done to NULL for the next run.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit 36387a2b1f ("k3dma: Fix
memory handling in preparation for cyclic mode") broke the
logic around ds_run/ds_done in case of non-cyclic DMA.
This went unnoticed as the only user of k3dma was the i2s
audio driver but, with a patch set to enable dma on SPI, the
issue popped out.
The fix re-applies the initialization to ds_run/ds_done in
k3_dma_start_txd() that were removed by the commit above.
Also, one of the calls to k3_dma_start_txd() is triggered by
(ds_done != NULL), so remove the noisy and useless call to
WARN_ON_ONCE().
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The newly added k3_dma_prep_dma_cyclic function has some debug output
that uses incorrect typecasts, some of which cause a warning like:
drivers/dma/k3dma.c: In function 'k3_dma_prep_dma_cyclic':
drivers/dma/k3dma.c:589:671: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
In general, we have to print 'dma_addr_t' values using special
'%pad' format to get the correct behavior on kernels that have
a 64-bit dma_addr_t type but 32-bit pointers.
Similarly, printing size_t values should be done using the %z
modifier to get the correct behavior on 64-bit kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a7e08fa6cc ("k3dma: Add cyclic mode for audio")
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Currently the k3dma driver doesn't offer the cyclic mode
necessary for handling audio.
This patch adds it.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Forward ported to mainline, removed a few
bits of logic that didn't seem to have much effect]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
With cyclic mode, the shared virt-dma logic doesn't actually
manage the descriptor state, nor the calling of the descriptor
free callback. This results in leaking a desc structure every
time we start an audio transfer.
Thus we must manage it ourselves. The k3dma driver already keeps
track of the active and finished descriptors via ds_run and ds_done
pointers, so cleanup how we handle those two values, so when we
tear down everything in terminate_all, call free_desc on the ds_run
and ds_done pointers if they are not null.
NOTE: HiKey doesn't use the non-cyclic dma modes, so I'm not been
able to test those modes. But with this patch we no longer leak
the desc structures.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
After lots of debugging on an occasional DMA ERR issue, I realized
that the desc structures which we point the dma hardware are being
allocated out of regular memory. This means when we fill the desc
structures, that data doesn't always get flushed out to memory by
the time we start the dma transfer, resulting in the dma engine getting
some null values, resulting in a DMA ERR on the first irq.
Thus, this patch adopts mechanism similar to the zx296702_dma of
allocating the desc structures from a dma pool, so the memory caching
rules are properly set to avoid this issue.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: John Stutlz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
As it was before, as soon as the DMAC IP felt there was an error
he would return IRQ_NONE since no actual transfer had completed.
After spinning on that for 100K interrupts, Linux yanks the IRQ with
a "nobody cared" error.
This patch lets it handle the interrupt and keep the IRQ alive.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Forward ported to mainline]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The offsets for ERR1 and ERR2 are wrong actually.
That's why you can never clear an error.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Forward ported to mainline]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Max burst len is a 4-bit field, but at the moment it's clipped with
a 5-bit constant... reduce it to that which can be expressed
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Forward ported to mainline]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Add the missing clk_disable_unprepare() before return
from k3_dma_probe() in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
If kzalloc() fails it will issue it's own error message including
a dump_stack(). So remove the site specific error messages.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Most drivers need to set constraints on the buffer alignment for async tx
operations. However, even though it is documented, some drivers either use
a defined constant that is not matching what the alignment variable expects
(like DMA_BUSWIDTH_* constants) or fill the alignment in bytes instead of
power of two.
Add a new enum for these alignments that matches what the framework
expects, and convert the drivers to it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit db08425ebd ("dmaengine: k3: Split device_control") introduced
two new helper functions, which unfortunately have the same names
as the existing suspend/resume functions, resulting in a build error
when CONFIG_PM_SLEEP is enabled:
drivers/dma/k3dma.c:823:12: error: conflicting types for 'k3_dma_resume'
static int k3_dma_resume(struct device *dev)
^
drivers/dma/k3dma.c:625:12: note: previous definition of 'k3_dma_resume' was here
static int k3_dma_resume(struct dma_chan *chan)
^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: db08425ebd ("dmaengine: k3: Split device_control")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
While splitting device control in db08425ebd ("dmaengine: k3:
Split device_control") new function with the same 'k3_dma_resume' name
was added, leading to build error:
drivers/dma/k3dma.c:823:12: error: conflicting types for ‘k3_dma_resume’
drivers/dma/k3dma.c:625:12: note: previous definition of ‘k3_dma_resume’ was here
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Split the device_control callback of the Hisilicon K3 DMA driver to make use
of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following
build warning when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when
the CONFIG_PM_SLEEP is enabled.
drivers/dma/k3dma.c:790:12: warning: 'k3_dma_suspend' defined but not used [-Wunused-function]
drivers/dma/k3dma.c:806:12: warning: 'k3_dma_resume' defined but not used [-Wunused-function]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
There is no need to init .owner field.
Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"
This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
[for nvidia]
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
chanctnt is already filled by dma_async_device_register, which uses the channel
list to know how much channels there is.
Since it's already filled, we can safely remove it from the drivers' probe
function.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Fix sparse warnings:
drivers/dma/k3dma.c:480:20: warning: Using plain integer as NULL pointer
drivers/dma/k3dma.c:820:1: warning: symbol 'k3_dma_pmops' was not declared. Should it be static?
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch proposes to remove the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Li Yu