Pull mqueue/bpf vfs cleanups from Al Viro:
"mqueue and bpf go through rather painful and similar contortions to
create objects in their dentry trees. Provide a primitive for doing
that without abusing ->mknod(), switch bpf and mqueue to it.
Another mqueue-related thing that has ended up in that branch is
on-demand creation of internal mount (based upon the work of Giuseppe
Scrivano)"
* 'work.mqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mqueue: switch to on-demand creation of internal mount
tidy do_mq_open() up a bit
mqueue: clean prepare_open() up
do_mq_open(): move all work prior to dentry_open() into a helper
mqueue: fold mq_attr_ok() into mqueue_get_inode()
move dentry_open() calls up into do_mq_open()
mqueue: switch to vfs_mkobj(), quit abusing ->d_fsdata
bpf_obj_do_pin(): switch to vfs_mkobj(), quit abusing ->mknod()
new primitive: vfs_mkobj()
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Call clear_siginfo to ensure stack allocated siginfos are fully
initialized before being passed to the signal sending functions.
This ensures that if there is the kind of confusion documented by
TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized
data to userspace when the kernel generates a signal with SI_USER but
the copy to userspace assumes it is a different kind of signal, and
different fields are initialized.
This also prepares the way for turning copy_siginfo_to_user
into a copy_to_user, by removing the need in many cases to perform
a field by field copy simply to skip the uninitialized fields.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Instead of doing that upon each ipcns creation, we do that the first
time mq_open(2) or mqueue mount is done in an ipcns. What's more,
doing that allows to get rid of mount_ns() use - we can go with
considerably cheaper mount_nodev(), avoiding the loop over all
mqueue superblock instances; ipcns->mq_mnt is used to locate preexisting
instance in O(1) time instead of O(instances) mount_ns() would've
cost us.
Based upon the version by Giuseppe Scrivano <gscrivan@redhat.com>; I've
added handling of userland mqueue mounts (original had been broken in
that area) and added a switch to mount_nodev().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a custom microbenchmark on a 3.30GHz Xeon SandyBridge, which calls
IPC_STAT over and over, it was calculated that, on avg the cost of
ipc_get_maxid() for increasing amounts of keys was:
10 keys: ~900 cycles
100 keys: ~15000 cycles
1000 keys: ~150000 cycles
10000 keys: ~2100000 cycles
This is unsurprising as maxid is currently O(n).
By having the max_id available in O(1) we save all those cycles for each
semctl(_STAT) command, the idr_find can be expensive -- which some real
(customer) workloads actually poll on.
Note that this used to be the case, until commit 7ca7e564e0 ("ipc:
store ipcs into IDRs"). The cost is the extra idr_find when doing
RMIDs, but we simply go backwards, and should not take too many
iterations to find the new value.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170831172049.14576-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is better understood as a limit, instead of size; exactly like the
function comment indicates. Rename it.
Link: http://lkml.kernel.org/r/20170831172049.14576-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The comment in msgqueues when using ipc_addid() is quite useful imo.
Duplicate it for shm and semaphores.
Link: http://lkml.kernel.org/r/20170831172049.14576-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "sysvipc: ipc-key management improvements".
Here are a few improvements I spotted while eyeballing Guillaume's
rhashtable implementation for ipc keys. The first and fourth patches
are the interesting ones, the middle two are trivial.
This patch (of 4):
The next_id object-allocation functionality was introduced in commit
03f5956680 ("ipc: add sysctl to specify desired next object id").
Given that these new entries are _only_ exported under the
CONFIG_CHECKPOINT_RESTORE option, there is no point for the common case
to even know about ->next_id. As such rewrite ipc_buildid() such that
it can do away with the field as well as unnecessary branches when
adding a new identifier. The end result also better differentiates both
cases, so the code ends up being cleaner; albeit the small duplications
regarding the default case.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170831172049.14576-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc vfs updates from Al Viro:
"Assorted stuff, really no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: grab the lock instead of blocking in __fd_install during resizing
vfs: stop clearing close on exec when closing a fd
include/linux/fs.h: fix comment about struct address_space
fs: make fiemap work from compat_ioctl
coda: fix 'kernel memory exposure attempt' in fsync
pstore: remove unneeded unlikely()
vfs: remove unneeded unlikely()
stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case
make vfs_ustat() static
do_handle_open() should be static
elf_fdpic: fix unused variable warning
fold destroy_super() into __put_super()
new helper: destroy_unused_super()
fix address space warnings in ipc/
acct.h: get rid of detritus
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"uip" misspelled as "up"; unfortunately, the latter happens to be
a function and gcc is happy to convert it to void *...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 553f770ef7 ("ipc: move compat shmctl to native") moved the
compat IPC syscall handling into ipc/shm.c and refactored the struct
accessors in the process. Unfortunately, the call to
copy_compat_shmid_to_user when handling a compat {IPC,SHM}_STAT command
gets the arguments the wrong way round, passing a kernel stack address
as the user buffer (destination) and the user buffer as the kernel stack
address (source).
This patch fixes the parameter ordering so the buffers are accessed
correctly.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull ipc compat cleanup and 64-bit time_t from Al Viro:
"IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa
Dinamani"
* 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
utimes: Make utimes y2038 safe
ipc: shm: Make shmid_kernel timestamps y2038 safe
ipc: sem: Make sem_array timestamps y2038 safe
ipc: msg: Make msg_queue timestamps y2038 safe
ipc: mqueue: Replace timespec with timespec64
ipc: Make sys_semtimedop() y2038 safe
get rid of SYSVIPC_COMPAT on ia64
semtimedop(): move compat to native
shmat(2): move compat to native
msgrcv(2), msgsnd(2): move compat to native
ipc(2): move compat to native
ipc: make use of compat ipc_perm helpers
semctl(): move compat to native
semctl(): separate all layout-dependent copyin/copyout
msgctl(): move compat to native
msgctl(): split the actual work from copyin/copyout
ipc: move compat shmctl to native
shmctl: split the work from copyin/copyout
ipc_findkey() used to scan all objects to look for the wanted key. This
is slow when using a high number of keys. This change adds an rhashtable
of kern_ipc_perm objects in ipc_ids, so that one lookup cease to be O(n).
This change gives a 865% improvement of benchmark reaim.jobs_per_min on a
56 threads Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz with 256G memory [1]
Other (more micro) benchmark results, by the author: On an i5 laptop, the
following loop executed right after a reboot took, without and with this
change:
for (int i = 0, k=0x424242; i < KEYS; ++i)
semget(k++, 1, IPC_CREAT | 0600);
total total max single max single
KEYS without with call without call with
1 3.5 4.9 µs 3.5 4.9
10 7.6 8.6 µs 3.7 4.7
32 16.2 15.9 µs 4.3 5.3
100 72.9 41.8 µs 3.7 4.7
1000 5,630.0 502.0 µs * *
10000 1,340,000.0 7,240.0 µs * *
31900 17,600,000.0 22,200.0 µs * *
*: unreliable measure: high variance
The duration for a lookup-only usage was obtained by the same loop once
the keys are present:
total total max single max single
KEYS without with call without call with
1 2.1 2.5 µs 2.1 2.5
10 4.5 4.8 µs 2.2 2.3
32 13.0 10.8 µs 2.3 2.8
100 82.9 25.1 µs * 2.3
1000 5,780.0 217.0 µs * *
10000 1,470,000.0 2,520.0 µs * *
31900 17,400,000.0 7,810.0 µs * *
Finally, executing each semget() in a new process gave, when still
summing only the durations of these syscalls:
creation:
total total
KEYS without with
1 3.7 5.0 µs
10 32.9 36.7 µs
32 125.0 109.0 µs
100 523.0 353.0 µs
1000 20,300.0 3,280.0 µs
10000 2,470,000.0 46,700.0 µs
31900 27,800,000.0 219,000.0 µs
lookup-only:
total total
KEYS without with
1 2.5 2.7 µs
10 25.4 24.4 µs
32 106.0 72.6 µs
100 591.0 352.0 µs
1000 22,400.0 2,250.0 µs
10000 2,510,000.0 25,700.0 µs
31900 28,200,000.0 115,000.0 µs
[1] http://lkml.kernel.org/r/20170814060507.GE23258@yexl-desktop
Link: http://lkml.kernel.org/r/20170815194954.ck32ta2z35yuzpwp@debix
Signed-off-by: Guillaume Knispel <guillaume.knispel@supersonicimagine.com>
Reviewed-by: Marc Pardo <marc.pardo@supersonicimagine.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Guillaume Knispel <guillaume.knispel@supersonicimagine.com>
Cc: Marc Pardo <marc.pardo@supersonicimagine.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter. This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.
Link: http://lkml.kernel.org/r/1499417992-3238-4-git-send-email-elena.reshetova@intel.com
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter. This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.
Link: http://lkml.kernel.org/r/1499417992-3238-3-git-send-email-elena.reshetova@intel.com
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter. This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.
Link: http://lkml.kernel.org/r/1499417992-3238-2-git-send-email-elena.reshetova@intel.com
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.
Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.
The syscall interfaces themselves are not changed as part of
the patch. They will be part of a different series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.
Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.
The syscall interface themselves are not changed as part of
the patch. They will be part of a different series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
time_t is not y2038 safe. Replace all uses of
time_t by y2038 safe time64_t.
Similarly, replace the calls to get_seconds() with
y2038 safe ktime_get_real_seconds().
Note that this preserves fast access on 64 bit systems,
but 32 bit systems need sequence counters.
The syscall interfaces themselves are not changed as part of
the patch. They will be part of a different series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct timespec is not y2038 safe. Replace
all uses of timespec by y2038 safe struct timespec64.
Even though timespec is used here to represent timeouts,
replace these with timespec64 so that it facilitates
in verification by creating a y2038 safe kernel image
that is free of timespec.
The syscall interfaces themselves are not changed as part
of the patch. They will be part of a different series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct timespec is not y2038 safe on 32 bit machines.
Replace timespec with y2038 safe struct timespec64.
Note that the patch only changes the internals without
modifying the syscall interface. This will be part
of a separate series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair. This commit therefore replaces the spin_unlock_wait() call in
exit_sem() with spin_lock() followed immediately by spin_unlock().
This should be safe from a performance perspective because exit_sem()
is rarely invoked in production.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
When building with the randstruct gcc plugin, the layout of the IPC
structs will be randomized, which requires any sub-structure accesses to
use container_of(). The proc display handlers were missing the needed
container_of()s since the iterator is passing in the top-level struct
kern_ipc_perm.
This would lead to crashes when running the "lsipc" program after the
system had IPC registered (e.g. after starting up Gnome):
general protection fault: 0000 [#1] PREEMPT SMP
...
RIP: 0010:shm_add_rss_swap.isra.1+0x13/0xa0
...
Call Trace:
sysvipc_shm_proc_show+0x5e/0x150
sysvipc_proc_show+0x1a/0x30
seq_read+0x2e9/0x3f0
...
Link: http://lkml.kernel.org/r/20170730205950.GA55841@beast
Fixes: 3859a271a0 ("randstruct: Mark various structs for randomization")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that ipc_rcu_alloc() and ipc_rcu_free() are removed, document when
it is valid to use ipc_getref() and ipc_putref().
Link: http://lkml.kernel.org/r/20170525185107.12869-21-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds