If we fail to contact the gss upcall program, then no message will
be sent to the server. The client still updated the sequence number,
however, and this lead to NFS4ERR_SEQ_MISMATCH for the next several
RPC calls.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since kernel 2.6.35, the SUNRPC Kerberos support has had an implicit
dependency on a number of additional crypto modules. The following
patch makes that dependency explicit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There can be an infinite loop if gss_create_upcall() is called without
the userspace program running. To prevent this, we return -EACCES if
we notice that pipe_version hasn't changed (indicating that the pipe
has not been opened).
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently when there's some failure to receive a callback (because we
couldn't find a matching xid, for example), we exit svc_recv with
sk_tcplen still set but without any pages saved with the socket. This
will cause a crash later in svc_tcp_restore_pages.
Instead, make sure we reset that tcp information whether the callback
received failed or succeeded.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Change initial mount authflavor only when server returns NFS4ERR_WRONGSEC
NFS: Fix a signed vs. unsigned secinfo bug
Revert "net/sunrpc: Use static const char arrays"
Allow the NFSv4 server to make use of TCP autotuning behaviour, which
was previously disabled by setting the sk_userlocks variable.
Set the receive buffers to be big enough to receive the whole RPC
request, and set this for the listening socket, not the accept socket.
Remove the code that readjusts the receive/send buffer sizes for the
accepted socket. Previously this code was used to influence the TCP
window management behaviour, which is no longer needed when autotuning
is enabled.
This can improve IO bandwidth on networks with high bandwidth-delay
products, where a large tcp window is required. It also simplifies
performance tuning, since getting adequate tcp buffers previously
required increasing the number of nfsd threads.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Cc: Jim Rees <rees@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Ensure that we immediately read and buffer data from the incoming TCP
stream so that we grow the receive window quickly, and don't deadlock on
large READ or WRITE requests.
Also do some minor exit cleanup.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's much simpler just to copy the cb reply data than to play tricks
with pages. Callback replies will typically be very small (at least
until we implement cb_getattr, in which case files with very long ACLs
could pose a problem), so there's no loss in efficiency.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client sents a record too short to contain even the beginning of
the rpc header, then just close the connection.
The current code drops the record data and continues. I don't see the
point. It's a hopeless situation and simpler just to cut off the
connection completely.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Minor cleanup in preparation for later patches.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't requeue the socket in some cases where we know it's unnecessary.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This reverts commit 411b5e0561.
Olga Kornievskaia reports:
Problem: linux client mounting linux server using rc4-hmac-md5
enctype. gssd fails with create a context after receiving a reply from
the server.
Diagnose: putting printout statements in the server kernel and
kerberos libraries revealed that client and server derived different
integrity keys.
Server kernel code was at fault due the the commit
[aglo@skydive linux-pnfs]$ git show 411b5e0561
Trond: The problem is that since it relies on virt_to_page(), you cannot
call sg_set_buf() for data in the const section.
Reported-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org [2.6.36+]
When sec=<something> is not presented as a mount option,
we should attempt to determine what security flavor the
server is using.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A submount may use different security than the parent
mount does. We should figure out what sec flavor the
submount uses at mount time.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Remove resource leak in svc_rdma_send_error()
nfsd: wrong index used in inner loop
nfsd4: fix comment and remove unused nfsd4_file fields
nfs41: make sure nfs server return right ca_maxresponsesize_cached
nfsd: fix compile error
svcrpc: fix bad argument in unix_domain_find
nfsd4: fix struct file leak
nfsd4: minor nfs4state.c reshuffling
svcrpc: fix rare race on unix_domain creation
nfsd41: modify the members value of nfsd4_op_flags
nfsd: add proc file listing kernel's gss_krb5 enctypes
gss:krb5 only include enctype numbers in gm_upcall_enctypes
NFSD, VFS: Remove dead code in nfsd_rename()
nfsd: kill unused macro definition
locks: use assign_type()
If we call xs_close(), we're in one of two situations:
- Autoclose, which means we don't expect to resend a request
- bind+connect failed, which probably means the port is in use
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
* 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (54 commits)
RPC: killing RPC tasks races fixed
xprt: remove redundant check
SUNRPC: Convert struct rpc_xprt to use atomic_t counters
SUNRPC: Ensure we always run the tk_callback before tk_action
sunrpc: fix printk format warning
xprt: remove redundant null check
nfs: BKL is no longer needed, so remove the include
NFS: Fix a warning in fs/nfs/idmap.c
Cleanup: Factor out some cut-and-paste code.
cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions.
NFS: account direct-io into task io accounting
gss:krb5 only include enctype numbers in gm_upcall_enctypes
RPCRDMA: Fix FRMR registration/invalidate handling.
RPCRDMA: Fix to XDR page base interpretation in marshalling logic.
NFSv4: Send unmapped uid/gids to the server when using auth_sys
NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattr
NFSv4: cleanup idmapper functions to take an nfs_server argument
NFSv4: Send unmapped uid/gids to the server if the idmapper fails
NFSv4: If the server sends us a numeric uid/gid then accept it
NFSv4.1: reject zero layout with zeroed stripe unit
...
We leak the memory allocated to 'ctxt' when we return after
'ib_dma_mapping_error()' returns !=0.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC task RPC_TASK_QUEUED bit is set must be checked before trying to wake up
task rpc_killall_tasks() because task->tk_waitqueue can not be set (equal to
NULL).
Also, as Trond Myklebust mentioned, such approach (instead of checking
tk_waitqueue to NULL) allows us to "optimise away the call to
rpc_wake_up_queued_task() altogether for those
tasks that aren't queued".
Here is an example of dereferencing of tk_waitqueue equal to NULL:
CPU 0 CPU 1 CPU 2
-------------------- --------------------- --------------------------
nfs4_run_open_task
rpc_run_task
rpc_execute
rpc_set_active
rpc_make_runnable
(waiting)
rpc_async_schedule
nfs4_open_prepare
nfs_wait_on_sequence
nfs_umount_begin
rpc_killall_tasks
rpc_wake_up_task
rpc_wake_up_queued_task
spin_lock(tk_waitqueue == NULL)
BUG()
rpc_sleep_on
spin_lock(&q->lock)
__rpc_sleep_on
task->tk_waitqueue = q
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This fixes a race in which the task->tk_callback() puts the rpc_task
to sleep, setting a new callback. Under certain circumstances, the current
code may end up executing the task->tk_action before it gets round to the
callback.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
bonding: enable netpoll without checking link status
xfrm: Refcount destination entry on xfrm_lookup
net: introduce rx_handler results and logic around that
bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
bonding: wrap slave state work
net: get rid of multiple bond-related netdevice->priv_flags
bonding: register slave pointer for rx_handler
be2net: Bump up the version number
be2net: Copyright notice change. Update to Emulex instead of ServerEngines
e1000e: fix kconfig for crc32 dependency
netfilter ebtables: fix xt_AUDIT to work with ebtables
xen network backend driver
bonding: Improve syslog message at device creation time
bonding: Call netif_carrier_off after register_netdevice
bonding: Incorrect TX queue offset
net_sched: fix ip_tos2prio
xfrm: fix __xfrm_route_forward()
be2net: Fix UDP packet detected status in RX compl
Phonet: fix aligned-mode pipe socket buffer header reserve
netxen: support for GbE port settings
...
Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
Fix printk format build warning:
net/sunrpc/xprtrdma/verbs.c:1463: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
'req' is dereferenced before checked for NULL.
The patch simply removes the check.
Signed-off-by: Jinqiu Yang<crindy646@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make the value in gm_upcall_enctypes just the enctype values.
This allows the values to be used more easily elsewhere.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the rpc_memreg_strategy is 5, FRMR are used to map RPC data.
This mode uses an FRMR to map the RPC data, then invalidates
(i.e. unregisers) the data in xprt_rdma_free. These FRMR are used
across connections on the same mount, i.e. if the connection goes
away on an idle timeout and reconnects later, the FRMR are not
destroyed and recreated.
This creates a problem for transport errors because the WR that
invalidate an FRMR may be flushed (i.e. fail) leaving the
FRMR valid. When the FRMR is later used to map an RPC it will fail,
tearing down the transport and starting over. Over time, more and
more of the FRMR pool end up in the wrong state resulting in
seemingly random disconnects.
This fix keeps track of the FRMR state explicitly by setting it's
state based on the successful completion of a reg/inv WR. If the FRMR
is ever used and found to be in the wrong state, an invalidate WR
is prepended, re-syncing the FRMR state and avoiding the connection loss.
Signed-off-by: Tom Tucker <tom@ogc.us>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The RPCRDMA marshalling logic assumed that xdr->page_base was an
offset into the first page of xdr->page_list. It is in fact an
offset into the xdr->page_list itself, that is, it selects the
first page in the page_list and the offset into that page.
The symptom depended in part on the rpc_memreg_strategy, if it was
FRMR, or some other one-shot mapping mode, the connection would get
torn down on a base and bounds error. When the badly marshalled RPC
was retransmitted it would reconnect, get the error, and tear down the
connection again in a loop forever. This resulted in a hung-mount. For
the other modes, it would result in silent data corruption. This bug is
most easily reproduced by writing more data than the filesystem
has space for.
This fix corrects the page_base assumption and otherwise simplifies
the iov mapping logic.
Signed-off-by: Tom Tucker <tom@ogc.us>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use our own async error handler.
Mark the layout as failed and retry i/o through the MDS on specified errors.
Update the mds_offset in nfs_readpage_retry so that a failed short-read retry
to a DS gets correctly resent through the MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
rpc_run_task can only fail if it is not passed in a preallocated task.
However, that is not at all clear with the current code. So
remove several impossible to occur failure checks.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
queue_work() only returns 0 or 1, never a negative value.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
xs_create_sock() is supposed to return a pointer or an ERR_PTR-encoded
error, but it currently returns 0 if xs_bind() fails.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Cc: stable@kernel.org [v2.6.37]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We leak the memory allocated to 'ctxt' when we return after
'ib_dma_mapping_error()' returns !=0.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Although they run as rpciod background tasks, under normal operation
(i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck()
and nfs4_do_close() want to be fully synchronous. This means that when we
exit, we want all references to the rpc_task to be gone, and we want
any dentry references etc. held by that task to be released.
For this reason these functions call __rpc_wait_for_completion_task(),
followed by rpc_put_task() in the expectation that the latter will be
releasing the last reference to the rpc_task, and thus ensuring that the
callback_ops->rpc_release() has been called synchronously.
This patch fixes a race which exists due to the fact that
rpciod calls rpc_complete_task() (in order to wake up the callers of
__rpc_wait_for_completion_task()) and then subsequently calls
rpc_put_task() without ensuring that these two steps are done atomically.
In order to avoid adding new spin locks, the patch uses the existing
waitqueue spin lock to order the rpc_task reference count releases between
the waiting process and rpciod.
The common case where nobody is waiting for completion is optimised for by
checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task
reference count is 1: in those cases we drop trying to grab the spin lock,
and immediately free up the rpc_task.
Those few processes that need to put the rpc_task from inside an
asynchronous context and that do not care about ordering are given a new
helper: rpc_put_task_async().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
"After merging the nfsd tree, today's linux-next build (powerpc
ppc64_defconfig) produced this warning:
net/sunrpc/svcauth_unix.c: In function 'unix_domain_find':
net/sunrpc/svcauth_unix.c:58: warning: passing argument 1 of
+'svcauth_unix_domain_release' from incompatible pointer type
net/sunrpc/svcauth_unix.c:41: note: expected 'struct auth_domain *' but
argument
+is of type 'struct unix_domain *'
Introduced by commit 8b3e07ac90 ("svcrpc: fix rare race on unix_domain
creation")."
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note that "new" here is not yet fully initialized; auth_domain_put
should be called only on auth_domains that have actually been added to
the hash.
Before this fix, two attempts to add the same domain at once could
cause the hlist_del in auth_domain_put to fail.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Make the value in gm_upcall_enctypes just the enctype values.
This allows the values to be used more easily elsewhere.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add proper RCU annotations/verbs to sk_wq and wq members
Fix __sctp_write_space() sk_sleep() abuse (and sock->wq access)
Fix sunrpc sk_sleep() abuse too
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The information required to find the nfs_client cooresponding to the incoming
back channel request is contained in the NFS layer. Perform minimal checking
in the RPC layer pg_authenticate method, and push more detailed checking into
the NFS layer where the nfs_client can be found.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
WQ_RESCUER is now an internal flag and should only be used in the
workqueue implementation proper. Use WQ_MEM_RECLAIM instead.
This doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: (62 commits)
nfsd4: fix callback restarting
nfsd: break lease on unlink, link, and rename
nfsd4: break lease on nfsd setattr
nfsd: don't support msnfs export option
nfsd4: initialize cb_per_client
nfsd4: allow restarting callbacks
nfsd4: simplify nfsd4_cb_prepare
nfsd4: give out delegations more quickly in 4.1 case
nfsd4: add helper function to run callbacks
nfsd4: make sure sequence flags are set after destroy_session
nfsd4: re-probe callback on connection loss
nfsd4: set sequence flag when backchannel is down
nfsd4: keep finer-grained callback status
rpc: allow xprt_class->setup to return a preexisting xprt
rpc: keep backchannel xprt as long as server connection
rpc: move sk_bc_xprt to svc_xprt
nfsd4: allow backchannel recovery
nfsd4: support BIND_CONN_TO_SESSION
nfsd4: modify session list under cl_lock
Documentation: fl_mylease no longer exists
...
Fix up conflicts in fs/nfsd/vfs.c with the vfs-scale work. The
vfs-scale work touched some msnfs cases, and this merge removes support
for that entirely, so the conflict was trivial to resolve.
* 'nfs-for-2.6.38' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (89 commits)
NFS fix the setting of exchange id flag
NFS: Don't use vm_map_ram() in readdir
NFSv4: Ensure continued open and lockowner name uniqueness
NFS: Move cl_delegations to the nfs_server struct
NFS: Introduce nfs_detach_delegations()
NFS: Move cl_state_owners and related fields to the nfs_server struct
NFS: Allow walking nfs_client.cl_superblocks list outside client.c
pnfs: layout roc code
pnfs: update nfs4_callback_recallany to handle layouts
pnfs: add CB_LAYOUTRECALL handling
pnfs: CB_LAYOUTRECALL xdr code
pnfs: change lo refcounting to atomic_t
pnfs: check that partial LAYOUTGET return is ignored
pnfs: add layout to client list before sending rpc
pnfs: serialize LAYOUTGET(openstateid)
pnfs: layoutget rpc code cleanup
pnfs: change how lsegs are removed from layout list
pnfs: change layout state seqlock to a spinlock
pnfs: add prefix to struct pnfs_layout_hdr fields
pnfs: add prefix to struct pnfs_layout_segment fields
...
This allows us to reuse the xprt associated with a server connection if
one has already been set up.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Multiple backchannels can share the same tcp connection; from rfc 5661 section
2.10.3.1:
A connection's association with a session is not exclusive. A
connection associated with the channel(s) of one session may be
simultaneously associated with the channel(s) of other sessions
including sessions associated with other client IDs.
However, multiple backchannels share a connection, they must all share
the same xid stream (hence the same rpc_xprt); the only way we have to
match replies with calls at the rpc layer is using the xid.
So, keep the rpc_xprt around as long as the connection lasts, in case
we're asked to use the connection as a backchannel again.
Requests to create new backchannel clients over a given server
connection should results in creating new clients that reuse the
existing rpc_xprt.
But to start, just reject attempts to associate multiple rpc_xprt's with
the same underlying bc_xprt.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This seems obviously transport-level information even if it's currently
used only by the server socket code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
vm_map_ram() is not available on NOMMU platforms, and causes trouble
on incoherrent architectures such as ARM when we access the page data
through both the direct and the virtual mapping.
The alternative is to use the direct mapping to access page data
for the case when we are not crossing a page boundary, but to copy
the data into a linear scratch buffer when we are accessing data
that spans page boundaries.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org [2.6.37]
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
usb: don't use flush_scheduled_work()
speedtch: don't abuse struct delayed_work
media/video: don't use flush_scheduled_work()
media/video: explicitly flush request_module work
ioc4: use static work_struct for ioc4_load_modules()
init: don't call flush_scheduled_work() from do_initcalls()
s390: don't use flush_scheduled_work()
rtc: don't use flush_scheduled_work()
mmc: update workqueue usages
mfd: update workqueue usages
dvb: don't use flush_scheduled_work()
leds-wm8350: don't use flush_scheduled_work()
mISDN: don't use flush_scheduled_work()
macintosh/ams: don't use flush_scheduled_work()
vmwgfx: don't use flush_scheduled_work()
tpm: don't use flush_scheduled_work()
sonypi: don't use flush_scheduled_work()
hvsi: don't use flush_scheduled_work()
xen: don't use flush_scheduled_work()
gdrom: don't use flush_scheduled_work()
...
Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Change d_delete from a dentry deletion notification to a dentry caching
advise, more like ->drop_inode. Require it to be constant and idempotent,
and not take d_lock. This is how all existing filesystems use the callback
anyway.
This makes fine grained dentry locking of dput and dentry lru scanning
much simpler.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Differentiate from server backchannel
Signed-off-by: Andy Adamson <andros@netapp.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The sessions based callback service is started prior to the CREATE_SESSION call
so that it can handle CB_NULL requests which can be sent before the
CREATE_SESSION call returns and the session ID is known.
Set the callback sessionid after a sucessful CREATE_SESSION.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the current sock create and destroy routines into the new transport ops.
Back channel socket will be destroyed by the svc_closs_all call in svc_destroy.
Added check: only TCP supported on shared back channel.
Signed-off-by: Andy Adamson <andros@netapp.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFSv4.1 shared back channel does not need to call svc_drop because the
callback service never outlives the single connection it services, and it
reuses it's buffers and keeps the trasport.
Signed-off-by: Andy Adamson <andros@netapp.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Supposes cache_check runs simultaneously with an update on a different
CPU:
cache_check task doing update
^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
1. test for CACHE_VALID 1'. set entry->data
& !CACHE_NEGATIVE
2. use entry->data 2'. set CACHE_VALID
If the two memory writes performed in step 1' and 2' appear misordered
with respect to the reads in step 1 and 2, then the caller could get
stale data at step 2 even though it saw CACHE_VALID set on the cache
entry.
Add memory barriers to prevent this.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We attempt to turn a cache entry negative in place. But that entry may
already have been filled in by some other task since we last checked
whether it was valid, so we could be modifying an already-valid entry.
If nothing else there's a likely leak in such a case when the entry is
eventually put() and contents are not freed because it has
CACHE_NEGATIVE set.
So, take the cache_lock just as sunrpc_cache_update() does.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we use -EAGAIN returns to determine when to drop a deferred
request. On its own, that is error-prone, as it makes us treat -EAGAIN
returns from other functions specially to prevent inadvertent dropping.
So, use a flag on the request instead.
Returning an error on request deferral is still required, to prevent
further processing, but we no longer need worry that an error return on
its own could result in a drop.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit d29068c431 "sunrpc: Simplify cache_defer_req and related
functions." asserted that cache_check() could determine success or
failure of cache_defer_req() by checking the CACHE_PENDING bit.
This isn't quite right.
We need to know whether cache_defer_req() created a deferred request,
in which case sending an rpc reply has become the responsibility of the
deferred request, and it is important that we not send our own reply,
resulting in two different replies to the same request.
And the CACHE_PENDING bit doesn't tell us that; we could have
succesfully created a deferred request at the same time as another
thread cleared the CACHE_PENDING bit.
So, partially revert that commit, to ensure that cache_check() returns
-EAGAIN if and only if a deferred request has been created.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: NeilBrown <neilb@suse.de>
[bfields@redhat.com: moved svcauth_unix_purge outside ifdef's.]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once a sunrpc cache entry is VALID, we should be replacing it (and
allowing any concurrent users to destroy it on last put) instead of
trying to update it in place.
Otherwise someone referencing the ip_map we're modifying here could try
to use the m_client just as we're putting the last reference.
The bug should only be seen by users of the legacy nfsd interfaces.
(Thanks to Neil for suggestion to use sunrpc_invalidate.)
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
And remove unnecessary double semicolon too.
No effect to code, as test is != 0.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently svc_sock_names calls svc_close_xprt on a svc_sock to
which it does not own a reference.
As soon as svc_close_xprt sets XPT_CLOSE, the socket could be
freed by a separate thread (though this is a very unlikely race).
It is safer to hold a reference while calling svc_close_xprt.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The xpt_pool field is only used for reporting BUGs.
And it isn't used correctly.
In particular, when it is cleared in svc_xprt_received before
XPT_BUSY is cleared, there is no guarantee that either the
compiler or the CPU might not re-order to two assignments, just
setting xpt_pool to NULL after XPT_BUSY is cleared.
If a different cpu were running svc_xprt_enqueue at this moment,
it might see XPT_BUSY clear and then xpt_pool non-NULL, and
so BUG.
This could be fixed by calling
smp_mb__before_clear_bit()
before the clear_bit. However as xpt_pool isn't really used,
it seems safest to simply remove xpt_pool.
Another alternate would be to change the clear_bit to
clear_bit_unlock, and the test_and_set_bit to test_and_set_bit_lock.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that all client-side XDR decoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC res *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each decoder function.
This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that all client-side XDR encoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC arg *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each encoder function.
Also, all the client-side encoder functions return 0 now, making a
return value superfluous. Take this opportunity to convert them to
return void instead.
This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up.
Just fixed a panic where the nrprocs field in a different upper layer
client was set by hand incorrectly. Use the compiler-generated method
used by the other upper layer protocols.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up.
The trend in the other XDR encoder functions is to BUG() when encoding
problems occur, since a problem here is always due to a local coding
error. Then, instead of a status, zero is unconditionally returned.
Update the rpcbind XDR encoders to behave this way.
To finish the update, use the new-style be32_to_cpup() and
cpu_to_be32() macros, and compute the buffer sizes using raw integers
instead of sizeof(). This matches the conventions used in other XDR
functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
cancel_rearming_delayed_work[queue]() has been superceded by
cancel_delayed_work_sync() quite some time ago. Convert all the
in-kernel users. The conversions are completely equivalent and
trivial.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: netdev@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: netfilter-devel@vger.kernel.org
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org
When an xprt is created, it has a refcount of 1, and XPT_BUSY is set.
The refcount is *not* owned by the thread that created the xprt
(as is clear from the fact that creators never put the reference).
Rather, it is owned by the absence of XPT_DEAD. Once XPT_DEAD is set,
(And XPT_BUSY is clear) that initial reference is dropped and the xprt
can be freed.
So when a creator clears XPT_BUSY it is dropping its only reference and
so must not touch the xprt again.
However svc_recv, after calling ->xpo_accept (and so getting an XPT_BUSY
reference on a new xprt), calls svc_xprt_recieved. This clears
XPT_BUSY and then svc_xprt_enqueue - this last without owning a reference.
This is dangerous and has been seen to leave svc_xprt_enqueue working
with an xprt containing garbage.
So we need to hold an extra counted reference over that call to
svc_xprt_received.
For safety, any time we clear XPT_BUSY and then use the xprt again, we
first get a reference, and the put it again afterwards.
Note that svc_close_all does not need this extra protection as there are
no threads running, and the final free can only be called asynchronously
from such a thread.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the rpcauth_refreshcred() call returns an error other than
EACCES, ENOMEM or ETIMEDOUT, we currently end up looping forever
between call_refresh and call_refreshresult.
The correct thing to do here is to exit on all errors except
EAGAIN and ETIMEDOUT, for which case we retry 3 times, then
return EACCES.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We call svc_xprt_enqueue() after something happens which we think may
require handling from a server thread. To avoid such events being lost,
svc_xprt_enqueue() must guarantee that there will be a svc_serv() call
from a server thread following any such event. It does that by either
waking up a server thread itself, or checking that XPT_BUSY is set (in
which case somebody else is doing it).
But the check of XPT_BUSY could occur just as someone finishes
processing some other event, and just before they clear XPT_BUSY.
Therefore it's important not to clear XPT_BUSY without subsequently
doing another svc_export_enqueue() to check whether the xprt should be
requeued.
The xpo_wspace() check in svc_xprt_enqueue() breaks this rule, allowing
an event to be missed in situations like:
data arrives
call svc_tcp_data_ready():
call svc_xprt_enqueue():
set BUSY
find no write space
svc_reserve():
free up write space
call svc_enqueue():
test BUSY
clear BUSY
So, instead, check wspace in the same places that the state flags are
checked: before taking BUSY, and in svc_receive().
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to be fooling with XPT_BUSY now that all the threads
are gone.
The list_del_init() here could execute at the same time as the
svc_xprt_enqueue()'s list_add_tail(), with undefined results. We don't
really care at this point, but it might result in a spurious
list-corruption warning or something.
And svc_close() isn't adding any value; just call svc_delete_xprt()
directly.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Follow up on b48fa6b991 by moving all the
svc_xprt_received() calls for the main xprt to one place. The clearing
of XPT_BUSY here is critical to the correctness of the server, so I'd
prefer it to be obvious where we do it.
The only substantive result is moving svc_xprt_received() after
svc_receive_deferred(). Other than a (likely insignificant) delay
waking up the next thread, that should be harmless.
Also reshuffle the exit code a little to skip a few other steps that we
don't care about the in the svc_delete_xprt() case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no harm to doing this, since the only caller will immediately
call svc_enqueue() afterwards, ensuring we don't miss the remaining
deferred requests just because XPT_DEFERRED was briefly cleared.
But why not just do this the simple way?
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hi,
We can simplify net/sunrpc/stats.c::rpc_alloc_iostats() a bit by getting
rid of the unneeded local variable 'new'.
Please CC me on replies.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
svcrpc: assume svc_delete_xprt() called only once
svcrpc: never clear XPT_BUSY on dead xprt
nfsd4: fix connection allocation in sequence()
nfsd4: only require krb5 principal for NFSv4.0 callbacks
nfsd4: move minorversion to client
nfsd4: delay session removal till free_client
nfsd4: separate callback change and callback probe
nfsd4: callback program number is per-session
nfsd4: track backchannel connections
nfsd4: confirm only on succesful create_session
nfsd4: make backchannel sequence number per-session
nfsd4: use client pointer to backchannel session
nfsd4: move callback setup into session init code
nfsd4: don't cache seq_misordered replies
SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
SUNRPC: Use conventional switch statement when reclassifying sockets
sunrpc/xprtrdma: clean up workqueue usage
sunrpc: Turn list_for_each-s into the ..._entry-s
...
Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
net/sunrpc: Use static const char arrays
nfs4: fix channel attribute sanity-checks
NFSv4.1: Use more sensible names for 'initialize_mountpoint'
NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
NFS: client needs to maintain list of inodes with active layouts
NFS: create and destroy inode's layout cache
NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
NFSv4.1: pnfs: full mount/umount infrastructure
NFS: set layout driver
NFS: ask for layouttypes during v4 fsinfo call
NFS: change stateid to be a union
NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
SUNRPC: define xdr_decode_opaque_fixed
NFSD: remove duplicate NFS4_STATEID_SIZE
Bryan Schumaker