Video captured in 1400x1050 resolution (bytesperline aka stride = 1408
bytes) is invalid. Fix it.
Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/m3y2bmq7a4.fsf@t19.piap.pl
[p.zabel@pengutronix.de: added "gpu: ipu-v3:" prefix to commit description]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Support is already implemented for the corresponding DRM formats,
just hook up the remaining V4L2 pixel formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Based on 1 normalized pattern(s):
the code contained herein is licensed under the gnu general public
license you may obtain a copy of the gnu general public license
version 2 or later at the following locations http www opensource
org licenses gpl license html http www gnu org copyleft gpl html
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 161 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support interlaced scan with planar formats, cpmem SLUV must
be programmed with the correct chroma line stride. For full and
partial planar 4:2:2 (YUV422P, NV16), chroma line stride must
be doubled. For full and partial planar 4:2:0 (YUV420, YVU420, NV12),
chroma line stride must _not_ be doubled, since a single chroma line
is shared by two luma lines.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Allow the caller of ipu_cpmem_set_image() to override the latters
calculation of the chroma plane offsets, by adding override U/V
plane offsets to 'struct ipu_image'.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a WARN_ON_ONCE() if either the Y/packed buffer, or the U/V offsets,
are not aligned on 8-byte boundaries. This will catch alignment
bugs in DRM, V4L2.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
- Fix U/V plane offsets for odd vertical offsets. Due to wrong operator
order, the y offset was not rounded down properly for vertically
chroma subsampled planar formats.
- Fix IPU id number for boards that don't have an OF alias for their
single IPU in the device tree. This is necessary to support imx-media
on i.MX51 and i.MX53 SoCs.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCW2RimhcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwM9hAP928KiDOQQNq4pYDTaq5pL3Tqnq
Co2evjrCqq8DJpbmPwD/cilKVCZ7rY24U2kV+X/nkNvemHg0uYwnmnfLeolKMAQ=
=uoGQ
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2018-08-03' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: ipu-v3 plane offset and IPU id fixes
- Fix U/V plane offsets for odd vertical offsets. Due to wrong operator
order, the y offset was not rounded down properly for vertically
chroma subsampled planar formats.
- Fix IPU id number for boards that don't have an OF alias for their
single IPU in the device tree. This is necessary to support imx-media
on i.MX51 and i.MX53 SoCs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1533552680.4204.14.camel@pengutronix.de
The U and V offset macros for planar 4:2:0 (U_OFFSET, V_OFFSET, and
UV_OFFSET), are not correct. The height component to the offset was
calculated as:
(pix->width * y / 4)
But this does not produce correct offsets for odd values of y (luma
line #). The luma line # must be decimated by two to produce the
correct U/V line #, so the correct formula is:
(pix->width * (y / 2) / 2)
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IPU also supports interlaced buffers that start with the bottom field.
To achieve this, the the base address EBA has to be increased by a stride
length and the interlace offset ILO has to be set to the negative stride.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Add the missing offset calculation for 16-bit grayscale images. Since
the IPU only supports capturing greyscale in raw passthrough mode, it
is the same as 16-bit bayer formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add the missing offset calculation for grayscale images. Since the IPU
only supports capturing greyscale in raw passthrough mode, it is the
same as 8-bit bayer formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add missing include <linux/sizes.h> in ipu-cpmem and ipu-ic, select
BITREVERSE for ipu-cpmem and GENERIC_ALLOCATOR for ipu-pre, and allow
to build if COMPILE_TEST is enabled.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Allow to skip writing odd chroma rows by setting the RDRW bit for
4:2:0 chroma subsampled formats for any IDMAC write channel. This
also allows to skip reading odd rows for the VDIC read channel.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IPUv3 can read 8-bit alpha values from a separate IDMAC channel driven
by the Alpha Transparency Controller (ATC) for the graphics IDMAC channels.
This allows to reduce memory bandwidth via a conditional read mechanism or
to support planar YUV formats with alpha transparency.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IPU does not natively understand bayer formats, but it can pass them
through unchanged. Add support for setting the image base address and
cropping offset to ipu_cpmem_set_image.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Otherwise, if the image base address is kept at zero, and if the user
ignores the error return value, the IPU may be configured to write into
the dma-apbh@00110000 region for large frames, which will lock up the
system.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IDMAC does support reading and writing DRM_FORMAT_YUV444 and
DRM_FORMAT_YVU444.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
ipu_cpmem_set_yuv_planar_full is only used directly, remove the wrapper.
Suggested-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Liu Ying <gnuiyl@gmail.com>
Adds ipu_cpmem_set_uv_offset(), to set planar U/V offsets.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Let ipu_cpmem_set_yuv_planar_full take a DRM_FORMAT instead of a
V4L2_PIXFMT and allow better control over U/V stride, U offset and
V offset settings in the CPMEM.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
While https was always supported on linuxtv.org, only in
Dec 3 2015 the website is using valid certificates.
As we're planning to drop pure http support on some
future, change the references at DRM include and at
the ipu-v3 driver to point to the https://linuxtv.org
URL instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds support for the ARGB4444 color format.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds ipu_cpmem_dump() which dumps a channel's cpmem to debug.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds support for the following planar and partial-planar formats:
YUV422
NV12
NV16
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Mohsin Kazmi <mohsin_kazmi@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Unified base offset and Y plane offset into a single variable,
moved all ipu_cpmem_set_buffer calls to a single location.
Removed NV21 and NV61 for now. The IDMAC doesn't understand U/V
order for chroma interleaved formats, so we'd need to work around
this by implenting U/V switching via the CSC unit.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a second buffer physaddr to struct ipu_image, for double-buffering
support.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds ipu_cpmem_set_axi_id() to set which AXI bus master the channel
will use to transfer data onto AXI bus.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Move channel parameter memory setup functions and macros into a new
submodule ipu-cpmem. In the process, cleanup arguments to the functions
to take a channel pointer instead of a pointer into cpmem for that
channel. That allows the structure of the parameter memory to be
private to ipu-cpmem.c.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Krzysztof Hałasa