gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently lx-symbols assumes that module text is always located at
module->core_layout->base, but s390 uses the following layout:
+------+ <- module->core_layout->base
| GOT |
+------+ <- module->core_layout->base + module->arch->plt_offset
| PLT |
+------+ <- module->core_layout->base + module->arch->plt_offset +
| TEXT | module->arch->plt_size
+------+
Therefore, when trying to debug modules on s390, all the symbol
addresses are skewed by plt_offset + plt_size.
Fix by adding plt_offset + plt_size to module_addr in
load_module_symbols().
Link: http://lkml.kernel.org/r/20191017085917.81791-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id. This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.
This fixes following error:
(gdb) lx-dmesg
Python Exception <class 'ValueError'> embedded null character:
Error occurred in Python command: embedded null character
The read_u* utility functions now take an offset argument to make them
easier to use.
Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some systems (like Chrome OS) may use "split debug" for kernel modules.
That means that the debug symbols are in a different file than the main
elf file. Let's handle that by also searching for debug symbols that end
in ".ko.debug".
This is a packaging topic. You can take a normal elf file and split the
debug out of it using objcopy. Try "man objcopy" and then take a look at
the "--only-keep-debug" option. It'll give you a whole recipe for doing
splitdebug. The suffix used for the debug symbols is arbitrary. If
people have other another suffix besides ".ko.debug" then we could
presumably support that too...
For portage (which is the packaging system used by Chrome OS) split debug
is supported by default (and the suffix is .ko.debug). ...and so in
Chrome OS we always get the installed elf files stripped and then the
symbols stashed away.
At the moment we don't actually use the normal portage magic to do this
for the kernel though since it affects our ability to get good stack dumps
in the kernel. We instead pass a script as "strip" [1].
[1] https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/refs/heads/master/eclass/cros-kernel/strip_splitdebug
Link: http://lkml.kernel.org/r/20190730234052.148744-1-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add helper commands and functions for finding pointers to struct device
by enumerating linux device bus/class infrastructure. This can be used
to fetch subsystem and driver-specific structs:
(gdb) p *$container_of($lx_device_find_by_class_name("net", "eth0"), "struct net_device", "dev")
(gdb) p *$container_of($lx_device_find_by_bus_name("i2c", "0-004b"), "struct i2c_client", "dev")
(gdb) p *(struct imx_port*)$lx_device_find_by_class_name("tty", "ttymxc1")->parent->driver_data
Several generic "lx-device-list" functions are included to enumerate
devices by bus and class:
(gdb) lx-device-list-bus usb
(gdb) lx-device-list-class
(gdb) lx-device-list-tree &platform_bus
Similar information is available in /sys but pointer values are
deliberately hidden.
Link: http://lkml.kernel.org/r/c948628041311cbf1b9b4cff3dda7d2073cb3eaa.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is like /sys/kernel/debug/pm/pm_genpd_summary except it's
accessible through a debugger.
This can be useful if the target crashes or hangs because power domains
were not properly enabled.
Link: http://lkml.kernel.org/r/f9ee627a0d4f94b894aa202fee8a98444049bed8.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CLK_GET_RATE_NOCACHE depends on CONFIG_COMMON_CLK. Importing constants.py
when CONFIG_COMMON_CLK is not defined causes:
(gdb) lx-symbols
(...)
File "scripts/gdb/linux/proc.py", line 15, in <module>
from linux import constants
File "scripts/gdb/linux/constants.py", line 2, in <module>
LX_CLK_GET_RATE_NOCACHE = gdb.parse_and_eval("CLK_GET_RATE_NOCACHE")
gdb.error: No symbol "CLK_GET_RATE_NOCACHE" in current context.
Link: http://lkml.kernel.org/r/20190523195313.24701-1-farosas@linux.ibm.com
Fixes: e7e6f462c1 ("scripts/gdb: print cached rate in lx-clk-summary")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The clk rate is always stored in clk_core but might be out of date and
require calls to update from hardware.
Deal with that case by printing a (c) suffix.
Link: http://lkml.kernel.org/r/1a474318982a5f0125f2360c4161029b17f56bd1.1556881728.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An incorrect argument to list_for_each is an internal error in gdb
scripts so a TypeError should be raised. The gdb.GdbError exception
type is intended for user errors such as incorrect invocation.
Drop the type assertion in list_for_each_entry because list_for_each
isn't going to suddenly yield something else.
Applies to both list and hlist
Link: http://lkml.kernel.org/r/c1d3fd4db13d999a3ba57f5bbc1924862d824f61.1556881728.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Finding an individual clk_core requires walking the tree which can be
quite complicated so add a helper for easy access.
(gdb) print *(struct clk_scu*)$lx_clk_core_lookup("uart0_clk")->hw
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an lx-clk-summary command which prints a subset of
/sys/kernel/debug/clk/clk_summary.
This can be used to examine hangs caused by clk not being enabled.
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These scripts have some pep8 style warnings. Fix them up so that this
directory is all pep8 clean.
Link: http://lkml.kernel.org/r/20190329220844.38234-6-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement a command to print the timer list, much like how
/proc/timer_list is implemented. This can be used to look at the
pending timers on a crashed system.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-5-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-5-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement gdb functions for rb_first(), rb_last(), rb_next(), and
rb_prev(). These can be useful to iterate through the kernel's
red-black trees.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-4-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-4-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lx-configdump <file> dumps the contents of the gzipped .config to a text
file when the config is included in the kernel with CONFIG_IKCONFIG. By
default, the file written is called config.txt, but it can be any user
supplied filename as well. If the kernel config is in a module
(configs.ko), then it can be loaded along with symbols for the module
loaded with 'lx-symbols' and then this command will still work.
Obviously if you have the whole vmlinux then this can also be achieved
with scripts/extract-ikconfig, but this gdb script can be useful to
confirm that the memory contents of the config in memory and the vmlinux
contents on disk match what is expected.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-3-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-3-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "gdb script for kconfig and timer list".
This is a handful of changes to the kernel's gdb scripts to do some more
debugging with kgdb. The first patch allows the vmlinux to be reloaded
from where it was specified on the command line so that this set of
scripts can be used from anywhere. The second patch adds a script to
dump the config.gz to a file on the host debugging machine. The third
patch adds some rb tree utilities and the last patch uses those rb tree
walking utilities to dump out the contents of /proc/timer_list from a
system under debug.
This patch (of 5):
If I run 'gdb <path/to/vmlinux>' and there's the vmlinux-gdb.py file
there I can properly see symbols and use the lx commands provided by the
GDB scripts. But once I run 'lx-symbols' at the command prompt, gdb
reloads the vmlinux symbols assuming that this script was run from the
directory that has vmlinux at the root. That isn't always true, but we
could just look and see what symbols were already loaded and use that
instead. Let's do that so this can work by being invoked anywhere.
Link: http://lkml.kernel.org/r/20190325184522.260535-2-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KBUILD_SRC was conventionally used for some different purposes:
[1] To remember the source tree path
[2] As a flag to check if sub-make is already done
[3] As a flag to check if Kbuild runs out of tree
For [1], we do not need to remember it because the top Makefile
can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
[2] has been replaced with self-commenting 'sub_make_done'.
For [3], we can distinguish in-tree/out-of-tree by comparing
$(srctree) and '.'
This commit converts [3] to prepare for the KBUILD_SRC removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
Since commit 1751e8a6cb ("Rename superblock flags (MS_xyz ->
SB_xyz)"), scripts/gdb should be updated to replace MS_xyz with SB_xyz.
This change didn't directly affect the running operation of scripts/gdb
until commit e262e32d6b "vfs: Suppress MS_* flag defs within the
kernel unless explicitly enabled" removed the definitions used by
constants.py.
Update constants.py.in to utilise the new internal flags, matching the
implementation at fs/proc_namespace.c::show_sb_opts.
Note to stable, e262e32d6b landed in v5.0-rc1 (which was just
released), so we'll want this picked back to 5.0 stable once this patch
hits mainline (akpm just picked it up). Without this, debugging a
kernel a kernel via GDB+QEMU is broken in the 5.0 release.
[kieran.bingham@ideasonboard.com: add fixes tag, reword commit message]
Link: http://lkml.kernel.org/r/20190305103014.25847-1-kieran.bingham@ideasonboard.com
Fixes: e262e32d6b "vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled"
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Dan Robertson <danlrobertson89@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gdb-scripts is not a real object, but (ab)used like a phony target.
Rewrite the code in a more Kbuild-ish way. Add symlinks to extra-y
and use if_changed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile
just for creating symbolic links, but it does not need to do it so early.
Merge the two descending paths to simplify the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
A bug is present in GDB which causes early string termination when
parsing variables. This has been reported [0], but we should ensure
that we can support at least basic printing of the core kernel strings.
For current gdb version (has been tested with 7.3 and 8.1), 'lx-version'
only prints one character.
(gdb) lx-version
L(gdb)
This can be fixed by casting 'linux_banner' as (char *).
(gdb) lx-version
Linux version 4.19.0-rc1+ (changbin@acer) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21 SMP Sat Sep 1 21:43:30 CST 2018
[0] https://sourceware.org/bugzilla/show_bug.cgi?id=20077
[kbingham@kernel.org: add detail to commit message]
Link: http://lkml.kernel.org/r/20181111162035.8356-1-kieran.bingham@ideasonboard.com
Fixes: 2d061d9994 ("scripts/gdb: add version command")
Signed-off-by: Du Changbin <changbin.du@gmail.com>
Signed-off-by: Kieran Bingham <kbingham@kernel.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since kernel 4.9, the thread_info has been moved into task_struct, no
longer locates at the bottom of kernel stack.
See commits c65eacbe29 ("sched/core: Allow putting thread_info into
task_struct") and 15f4eae70d ("x86: Move thread_info into
task_struct").
Before fix:
(gdb) set $current = $lx_current()
(gdb) p $lx_thread_info($current)
$1 = {flags = 1470918301}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
After fix:
(gdb) p $lx_thread_info($current)
$1 = {flags = 2147483648}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
Link: http://lkml.kernel.org/r/20180118210159.17223-1-imxikangjie@gmail.com
Fixes: 15f4eae70d ("x86: Move thread_info into task_struct")
Signed-off-by: Xi Kangjie <imxikangjie@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get
the absolute path of the directory because GNU Make 3.80, the minimal
supported version at that time, did not support $(abspath ...) or
$(realpath ...).
Commit 37d69ee308 ("docs: bump minimal GNU Make version to 3.81")
dropped the GNU Make 3.80 support, so we are now allowed to use those
make-builtin helpers.
This conversion will provide better portability without relying on
the pwd command or its location /bin/pwd.
I am intentionally using $(realpath ...) instead $(abspath ...) in
some places. The difference between the two is $(realpath ...)
returns an empty string if the given path does not exist. It is
convenient in places where we need to error-out if the makefile fails
to create an output directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Use errors=replace because it is never desirable for lx-dmesg to fail on
string decoding errors, not even if the log buffer is corrupt and we
show incorrect info.
The kernel will sometimes print utf8, for example the copyright symbol
from jffs2. In order to make this work specify 'utf8' everywhere
because python2 otherwise defaults to 'ascii'.
In theory the second errors='replace' is not be required because
everything that can be decoded as utf8 should also be encodable back to
utf8. But it's better to be extra safe here. It's worth noting that
this is definitely not true for encoding='ascii', unknown characters are
replaced with U+FFFD REPLACEMENT CHARACTER and they fail to encode back
to ascii.
Link: http://lkml.kernel.org/r/acee067f3345954ed41efb77b80eebdc038619c6.1498481469.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kieran@ksquared.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In some cases it is possible for the str() conversion here to throw
encoding errors because log_buf might not point to valid ascii. For
example:
(gdb) python print str(gdb.parse_and_eval("log_buf"))
Traceback (most recent call last):
File "<string>", line 1, in <module>
UnicodeEncodeError: 'ascii' codec can't encode character u'\u0303' in
position 24: ordinal not in range(128)
Avoid this by explicitly casting to (void *) inside the gdb expression.
Link: http://lkml.kernel.org/r/ba6f85dbb02ca980ebd0e2399b0649423399b565.1498481469.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kieran@ksquared.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lx-fdtdump dumps the flattened device tree passed to the kernel from the
bootloader to the filename specified as the command argument. If no
argument is provided it defaults to fdtdump.dtb. This then allows
further post processing on the machine running GDB. The fdt header is
also also printed in the GDB console. For example:
(gdb) lx-fdtdump
fdt_magic: 0xD00DFEED
fdt_totalsize: 0xC108
off_dt_struct: 0x38
off_dt_strings: 0x3804
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
Dumped fdt to fdtdump.dtb
>fdtdump fdtdump.dtb | less
This command is useful as the bootloader can often re-write parts of the
device tree, and this can sometimes cause the kernel to not boot.
Link: http://lkml.kernel.org/r/1481280065-5336-2-git-send-email-kbingham@kernel.org
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Kieran Bingham <kbingham@kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lx-dmesg needs access to the log_buf symbol from printk.c.
Unfortunately, the symbol log_buf also exists in BPF's verifier.c and
hence gdb can pick one or the other. If it happens to pick BPF's
log_buf, lx-dmesg doesn't work:
(gdb) lx-dmesg
Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0:
Error occurred in Python command: Cannot access memory at address 0x0
(gdb) p log_buf
$15 = 0x0
Luckily, GDB has a way to deal with this, see
https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html
(gdb) info variables ^log_buf$
All variables matching regular expression "^log_buf$":
File <linux.git>/kernel/bpf/verifier.c:
static char *log_buf;
File <linux.git>/kernel/printk/printk.c:
static char *log_buf;
(gdb) p 'verifier.c'::log_buf
$1 = 0x0
(gdb) p 'printk.c'::log_buf
$2 = 0x811a6aa0 <__log_buf> ""
(gdb) p &log_buf
$3 = (char **) 0x8120fe40 <log_buf>
(gdb) p &'verifier.c'::log_buf
$4 = (char **) 0x8120fe40 <log_buf>
(gdb) p &'printk.c'::log_buf
$5 = (char **) 0x8048b7d0 <log_buf>
By being explicit about the location of the symbol, we can make lx-dmesg
work again. While at it, do the same for the other symbols we need from
printk.c
Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.net
Signed-off-by: André Draszik <git@andred.net>
Tested-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit e127a73d41 ("scripts/gdb: add a Radix Tree
Parser")
The python implementation of radix-tree was merged at the same time as
the radix-tree system was heavily reworked from commit e9256efcc8
("radix-tree: introduce radix_tree_empty") to 3bcadd6fa6 ("radix-tree:
free up the bottom bit of exceptional entries for reuse") and no longer
functions, but also prevents other gdb scripts from loading.
This functionality has not yet hit a release, so simply remove it for
now
Link: http://lkml.kernel.org/r/1467127337-11135-6-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Python doesn't do automatic expansion of paths. In case one passes path
of the from ~/foo/bar the gdb scripts won't automatically expand that
and as a result the symbols files won't be loaded.
Fix this by explicitly expanding all paths which begin with "~"
Link: http://lkml.kernel.org/r/1467127337-11135-5-git-send-email-kieran@bingham.xyz
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since scripts/gdb/linux/constants.py is autogenerated, this should have
been added to .gitignore when it was introduced.
Fixes: f197d75fca ("scripts/gdb: provide linux constants")
Link: http://lkml.kernel.org/r/1467127337-11135-4-git-send-email-kieran@bingham.xyz
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autogenerated constants.py file was only being built on the initial
call, and if the constants.py.in file changed. As we are utilising the
CPP hooks, we can successfully use the call if_changed_dep rules to
determine when to rebuild the file based on it's inclusions.
Link: http://lkml.kernel.org/r/1467127337-11135-3-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The constants.py generation, involves a rule to link into the main
makefile. This rule has no command and generates a spurious warning
message in the build logs when CONFIG_SCRIPTS_GDB is enabled.
Fix simply by giving a no-op action
Link: http://lkml.kernel.org/r/1467127337-11135-2-git-send-email-kieran@bingham.xyz
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent fixes to lx-dmesg, now allow the command to print
successfully on Python3, however the python interpreter wraps the bytes
for each line with a b'<text>' marker.
To remove this, we need to decode the line, where .decode() will default
to 'UTF-8'
Link: http://lkml.kernel.org/r/d67ccf93f2479c94cb3399262b9b796e0dbefcf2.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Dom Cote <buzdelabuz2@gmail.com>
Tested-by: Dom Cote <buzdelabuz2@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When built against Python 3, GDB differs in the return type for its
read_memory function, causing the lx-dmesg command to fail.
Now that we have an improved read_16() we can use the new
read_memoryview() abstraction to make lx-dmesg return valid data on both
current Python APIs
Tested with python 3.4 and 2.7
Tested with gdb 7.7
Link: http://lkml.kernel.org/r/28477b727ff7fe3101fd4e426060e8a68317a639.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Dom Cote <buzdelabuz2+git@gmail.com>
[kieran@bingham.xyz: Adjusted commit log to better reflect code changes]
Tested-by: Kieran Bingham <kieran@bingham.xyz> (Py2.7,Py3.4,GDB10)
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the read_u16 function so it accepts both 'str' and 'byte' as type
for the arguments.
When calling read_memory() from gdb API, depending on if it was built
with 2.7 or 3.X, the format used to return the data will differ ( 'str'
for 2.7, and 'byte' for 3.X ).
Add a function read_memoryview() to be able to get a 'memoryview' object
back from read_memory() both with python 2.7 and 3.X .
Tested with python 3.4 and 2.7
Tested with gdb 7.7
Link: http://lkml.kernel.org/r/73621f564503137a002a639d174e4fb35f73f462.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Dom Cote <buzdelabuz2+git@gmail.com>
Tested-by: Kieran Bingham <kieran@bingham.xyz> (Py2.7,Py3.4,GDB10)
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The tasks module already provides helpers to find the task struct by
pid, and the thread_info by task struct; however this is cumbersome to
utilise on the gdb commandline.
Wrap these two functionalities together in an extra single helper to
allow exploring the thread info, from a PID value
Link: http://lkml.kernel.org/r/dadc5667f053ec811eb3e3033d99d937fedbc93b.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linux makes use of the Radix Tree data structure to store pointers
indexed by integer values. This structure is utilised across many
structures in the kernel including the IRQ descriptor tables, and
several filesystems.
This module provides a method to lookup values from a structure given
its head node.
Usage:
The function lx_radix_tree_lookup, must be given a symbol of type struct
radix_tree_root, and an index into that tree.
The object returned is a generic integer value, and must be cast
correctly to the type based on the storage in the data structure.
For example, to print the irq descriptor in the sparse irq_desc_tree at
index 18, try the following:
(gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18)
Link: http://lkml.kernel.org/r/d2028c55e50cf95a9b7f8ca0d11885174b0cc709.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The linux kernel provides macro's for iterating against values from the
cpu_list masks. By providing some commonly used masks, we can mirror
the kernels helper macros with easy to use generators.
Link: http://lkml.kernel.org/r/d045c6599771ada1999d49612ee30fd2f9acf17f.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lx-mounts will identify current mount points based on the 'init_task'
namespace by default, as we do not yet have a kernel thread list
implementation to select the current running thread.
Optionally, a user can specify a PID to list from that process'
namespace
Link: http://lkml.kernel.org/r/e614c7bc32d2350b4ff1627ec761a7148e65bfe6.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide iomem_resource and ioports_resource printers and command hooks
It can be quite interesting to halt the kernel as it's booting and check
to see this list as it is being populated.
It should be useful in the event that a kernel is not booting, you can
identify what memory resources have been registered
Link: http://lkml.kernel.org/r/f0a6b9fa9c92af4d7ed2e7343ccc84150e9c6fc5.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Walk the VFS entries, pre-pending the iname strings to generate a full
VFS path name from a dentry.
Link: http://lkml.kernel.org/r/4328fdb2d15ba7f1b21ad21c2eecc38d9cfc4d13.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If CONFIG_MODULES is not enabled, lx-lsmod tries to find a non-existent
symbol and generates an unfriendly traceback:
(gdb) lx-lsmod
Address Module Size Used by
Traceback (most recent call last):
File "scripts/gdb/linux/modules.py", line 75, in invoke
for module in module_list():
File "scripts/gdb/linux/modules.py", line 24, in module_list
module_ptr_type = module_type.get_type().pointer()
File "scripts/gdb/linux/utils.py", line 28, in get_type
self._type = gdb.lookup_type(self._name)
gdb.error: No struct type named module.
Error occurred in Python command: No struct type named module.
Catch the error and return an empty module_list() for a clean command
output as follows:
(gdb) lx-lsmod
Address Module Size Used by
(gdb)
Link: http://lkml.kernel.org/r/94d533819437408b85ae5864f939dd7ca6fbfcd6.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we attempt to read a value that is not available to GDB, an exception
is raised. Most of the time, this is a good thing; however on occasion
we will want to be able to determine if a symbol is available.
By catching the exception to simply return None, we can determine if we
tried to read an invalid value, without the exception taking our
execution context away from us
Link: http://lkml.kernel.org/r/c72b25c06fc66e1d68371154097e2cbb112555d8.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplify the module list functions with the new list_for_each_entry
abstractions
Link: http://lkml.kernel.org/r/ad0101c9391088608166fcec26af179868973d86.1462865983.git.jan.kiszka@siemens.com
Signed-off-by: Kieran Bingham <kieran.bingham@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada