Commit Graph

6 Commits

Author SHA1 Message Date
Linus Torvalds 556eb8b791 Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1.
 
 Once again, a busy development cycle, with lots of changes happening in
 the driver core in the quest to be able to move "struct bus" and "struct
 class" into read-only memory, a task now complete with these changes.
 
 This will make the future rust interactions with the driver core more
 "provably correct" as well as providing more obvious lifetime rules for
 all busses and classes in the kernel.
 
 The changes required for this did touch many individual classes and
 busses as many callbacks were changed to take const * parameters
 instead.  All of these changes have been submitted to the various
 subsystem maintainers, giving them plenty of time to review, and most of
 them actually did so.
 
 Other than those changes, included in here are a small set of other
 things:
   - kobject logging improvements
   - cacheinfo improvements and updates
   - obligatory fw_devlink updates and fixes
   - documentation updates
   - device property cleanups and const * changes
   - firwmare loader dependency fixes.
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
 LEGadNS38k5fs+73UaxV
 =7K4B
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...
2023-04-27 11:53:57 -07:00
Arnd Bergmann 586d492f28 crypto: ixp4xx - fix building wiht 64-bit dma_addr_t
The crypt_ctl structure must be exactly 64 bytes long to work correctly,
and it has to be a power-of-two size to allow turning the
64-bit division in crypt_phys2virt() into a shift operation, avoiding
the link failure:

ERROR: modpost: "__aeabi_uldivmod" [drivers/crypto/intel/ixp4xx/ixp4xx_crypto.ko] undefined!

The failure now shows up because the driver is available for compile
testing after the move, and a previous fix turned the more descriptive
BUILD_BUG_ON() into a link error.

Change the variably-sized dma_addr_t into the expected 'u32' type that is
needed for the hardware, and reinstate the size check for all 32-bit
architectures to simplify debugging if it hits again.

Fixes: 1bc7fdbf26 ("crypto: ixp4xx - Move driver to drivers/crypto/intel/ixp4xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-14 18:59:34 +08:00
Herbert Xu 8ae8a494ea crypto: ixp4xx - Do not check word size when compile testing
The BUILD_BUG_ON preventing compilation on foreign architectures
should be disabled when we're doing compile testing.

Fixes: 1bc7fdbf26 ("crypto: ixp4xx - Move driver to...")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304061846.G6cpPXiQ-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-11 10:21:26 +08:00
Tom Zanussi a4b16dad46 crypto: qat - Move driver to drivers/crypto/intel/qat
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:41:28 +08:00
Tom Zanussi 1bc7fdbf26 crypto: ixp4xx - Move driver to drivers/crypto/intel/ixp4xx
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.

Create a separate drivers/crypto/intel/ixp4xx directory and move
drivers/crypto/ixp4xx_crypto.c to it, along with a new Kconfig and
Makefile to contain the config and make bits.

Also add a COMPILE_TEST dependency to CRYPTO_DEV_IXP4XX so it can be
more easily compile-tested.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:38:31 +08:00
Tom Zanussi fbf31dd599 crypto: keembay - Move driver to drivers/crypto/intel/keembay
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:35:17 +08:00