The kbuild robot shows build failure on machines without CONFIG_SMP:
drivers/net/virtio_net.c:1916:10: error:
implicit declaration of function 'cpumask_next_wrap'
cpumask_next_wrap is exported from lib/cpumask.o, which has
lib-$(CONFIG_SMP) += cpumask.o
same as other functions, also define it as static inline in the
NR_CPUS==1 branch in include/linux/cpumask.h.
If wrap is true and next == start, return nr_cpumask_bits, or 1.
Else wrap across the range of valid cpus, here [0].
Fixes: 2ca653d607 ("virtio_net: Stripe queue affinities across cores.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There have been two reports that network doesn't come back on resume
from suspend when using MSI-X. Both cases affect the same chip version
(RTL8168g - version 40), on different systems. Falling back to MSI
fixes the issue.
Even though we don't really have a proof yet that the network chip
version is to blame, let's disable MSI-X for this version.
Reported-by: Steve Dodd <steved424@gmail.com>
Reported-by: Lou Reed <gogen@disroot.org>
Tested-by: Steve Dodd <steved424@gmail.com>
Tested-by: Lou Reed <gogen@disroot.org>
Fixes: 6c6aa15fde ("r8169: improve interrupt handling")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Moritz Fischer says:
====================
net: nixge: Minor cleanups
in preparation of my 64-bit support series, here's some
minor cleanup in preparation that gets rid of unneccesary
accesses to the descriptor application fields.
I've confirmed that the hardware does not access the fields
in all our configurations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't store skb in app4 field of descriptor since it is
not being used anywhere (including hardware).
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not zero application specific fields in DMA descriptors.
The hardware does ignore them, so should software.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preventing the kernel from responding to ICMP Echo Requests messages
can be useful in several ways. The sysctl parameter
'icmp_echo_ignore_all' can be used to prevent the kernel from
responding to IPv4 ICMP echo requests. For IPv6 pings, such
a sysctl kernel parameter did not exist.
Add the ability to prevent the kernel from responding to IPv6
ICMP echo requests through the use of the following sysctl
parameter : /proc/sys/net/ipv6/icmp/echo_ignore_all.
Update the documentation to reflect this change.
Signed-off-by: Virgile Jarry <virgile@acceis.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vakul Garg says:
====================
net/tls: Combined memory allocation for decryption request
This patch does a combined memory allocation from heap for scatterlists,
aead_request, aad and iv for the tls record decryption path. In present
code, aead_request is allocated from heap, scatterlists on a conditional
basis are allocated on heap or on stack. This is inefficient as it may
requires multiple kmalloc/kfree.
The initialization vector passed in cryption request is allocated on
stack. This is a problem since the stack memory is not dma-able from
crypto accelerators.
Doing one combined memory allocation for each decryption request fixes
both the above issues. It also paves a way to be able to submit multiple
async decryption requests while the previous one is pending i.e. being
processed or queued.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For preparing decryption request, several memory chunks are required
(aead_req, sgin, sgout, iv, aad). For submitting the decrypt request to
an accelerator, it is required that the buffers which are read by the
accelerator must be dma-able and not come from stack. The buffers for
aad and iv can be separately kmalloced each, but it is inefficient.
This patch does a combined allocation for preparing decryption request
and then segments into aead_req || sgin || sgout || iv || aad.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Oskolkov says:
====================
ip: faster in-order IP fragments
Added "Signed-off-by" in v2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the runtime behavior of IP defrag queue:
incoming in-order fragments are added to the end of the current
list/"run" of in-order fragments at the tail.
On some workloads, UDP stream performance is substantially improved:
RX: ./udp_stream -F 10 -T 2 -l 60
TX: ./udp_stream -c -H <host> -F 10 -T 5 -l 60
with this patchset applied on a 10Gbps receiver:
throughput=9524.18
throughput_units=Mbit/s
upstream (net-next):
throughput=4608.93
throughput_units=Mbit/s
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces several helper functions/macros that will be
used in the follow-up patch. No runtime changes yet.
The new logic (fully implemented in the second patch) is as follows:
* Nodes in the rb-tree will now contain not single fragments, but lists
of consecutive fragments ("runs").
* At each point in time, the current "active" run at the tail is
maintained/tracked. Fragments that arrive in-order, adjacent
to the previous tail fragment, are added to this tail run without
triggering the re-balancing of the rb-tree.
* If a fragment arrives out of order with the offset _before_ the tail run,
it is inserted into the rb-tree as a single fragment.
* If a fragment arrives after the current tail fragment (with a gap),
it starts a new "tail" run, as is inserted into the rb-tree
at the end as the head of the new run.
skb->cb is used to store additional information
needed here (suggested by Eric Dumazet).
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
Remove rtnl lock dependency from all action implementations
Currently, all netlink protocol handlers for updating rules, actions and
qdiscs are protected with single global rtnl lock which removes any
possibility for parallelism. This patch set is a second step to remove
rtnl lock dependency from TC rules update path.
Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added.
Handlers registered with this flag are called without RTNL taken. End
goal is to have rule update handlers(RTM_NEWTFILTER, RTM_DELTFILTER,
etc.) to be registered with UNLOCKED flag to allow parallel execution.
However, there is no intention to completely remove or split rtnl lock
itself. This patch set addresses specific problems in implementation of
tc actions that prevent their control path from being executed
concurrently. Additional changes are required to refactor classifiers
API and individual classifiers for parallel execution. This patch set
lays groundwork to eventually register rule update handlers as
rtnl-unlocked.
Action API is already prepared for parallel execution with previous
patch set, which means that action ops that use action API for their
implementation do not require additional modifications. (delete, search,
etc.) Action API implements concurrency-safe reference counting and
guarantees that cleanup/delete is called only once, after last reference
to action is released.
The goal of this change is to update specific actions APIs that access
action private state directly, in order to be independent from external
locking. General approach is to re-use existing tcf_lock spinlock (used
by some action implementation to synchronize control path with data
path) to protect action private state from concurrent modification. If
action has rcu-protected pointer, tcf spinlock is used to protect its
update code, instead of relying on rtnl lock.
Some actions need to determine rtnl mutex status in order to release it.
For example, ife action can load additional kernel modules(meta ops) and
must make sure that no locks are held during module load. In such cases
'rtnl_held' argument is used to conditionally release rtnl mutex.
Changes from V1 to V2:
- Patch 12:
- new patch
- Patch 14:
- refactor gen_new_estimator() to reuse stats_lock when re-assigning
rate estimator statistics pointer
- Remove mirred and tunnel_key helper function changes. (to be submitted
and standalone patch)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect police action private data from concurrent
modification during dump. (init already uses tcf spinlock when changing
police action state)
Pass tcf spinlock as estimator lock argument to gen_replace_estimator()
during action init.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend gen_new_estimator() to also take stats_lock when re-assigning rate
estimator statistics pointer. (to be used by unlocked actions)
Rename 'stats_lock' to 'lock' and change argument description to explain
that it is now also used for control path.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Re-introduce mirred list spinlock, that was removed some time ago, in order
to protect it from concurrent modifications, instead of relying on rtnl
lock.
Use tcf spinlock to protect mirred action private data from concurrent
modification in init and dump. Rearrange access to mirred data in order to
be performed only while holding the lock.
Rearrange net dev access to always hold reference while working with it,
instead of relying on rntl lock.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparation for removing dependency on rtnl lock from rules update
path, all users of shared objects must take reference while working with
them.
Extend action ops with put_dev() API to be used on net device returned by
get_dev().
Modify mirred action (only action that implements get_dev callback):
- Take reference to net device in get_dev.
- Implement put_dev API that releases reference to net device.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect vlan action private data from concurrent
modification during dump and init. Use rcu swap operation to reassign
params pointer under protection of tcf lock. (old params value is not used
by init, so there is no need of standalone rcu dereference step)
Remove rtnl assertion that is no longer necessary.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf lock to protect tunnel key action struct private data from
concurrent modification in init and dump. Use rcu swap operation to
reassign params pointer under protection of tcf lock. (old params value is
not used by init, so there is no need of standalone rcu dereference step)
Remove rtnl lock assertion that is no longer required.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move read of skbmod_p rcu pointer to be protected by tcf spinlock. Use tcf
spinlock to protect private skbmod data from concurrent modification during
dump.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect private simple action data from concurrent
modification during dump. (simple init already uses tcf spinlock when
changing action state)
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect private sample action data from concurrent
modification during dump and init.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rearrange pedit init code to only access pedit action data while holding
tcf spinlock. Change keys allocation type to atomic to allow it to execute
while holding tcf spinlock. Take tcf spinlock in dump function when
accessing pedit action data.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect ipt action private data from concurrent
modification during dump. Ipt init already takes tcf spinlock when
modifying ipt state.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock and rcu to protect params pointer from concurrent
modification during dump and init. Use rcu swap operation to reassign
params pointer under protection of tcf lock. (old params value is not used
by init, so there is no need of standalone rcu dereference step)
Ife action has meta-actions that are compiled as standalone modules. Rtnl
mutex must be released while loading a kernel module. In order to support
execution without rtnl mutex, propagate 'rtnl_held' argument to meta action
loading functions. When requesting meta action module, conditionally
release rtnl lock depending on 'rtnl_held' argument.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect gact action private state from concurrent
modification during dump and init. Remove rtnl assertion that is no longer
necessary.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf lock to protect csum action struct private data from concurrent
modification in init and dump. Use rcu swap operation to reassign params
pointer under protection of tcf lock. (old params value is not used by
init, so there is no need of standalone rcu dereference step)
Remove rtnl assertion that is no longer necessary.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect bpf action private data from concurrent
modification during dump and init. Remove rtnl lock assertion that is no
longer necessary.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khorenko says:
====================
net/sctp: Avoid allocating high order memory with kmalloc()
Each SCTP association can have up to 65535 input and output streams.
For each stream type an array of sctp_stream_in or sctp_stream_out
structures is allocated using kmalloc_array() function. This function
allocates physically contiguous memory regions, so this can lead
to allocation of memory regions of very high order, i.e.:
sizeof(struct sctp_stream_out) == 24,
((65535 * 24) / 4096) == 383 memory pages (4096 byte per page),
which means 9th memory order.
This can lead to a memory allocation failures on the systems
under a memory stress.
We actually do not need these arrays of memory to be physically
contiguous. Possible simple solution would be to use kvmalloc()
instread of kmalloc() as kvmalloc() can allocate physically scattered
pages if contiguous pages are not available. But the problem
is that the allocation can happed in a softirq context with
GFP_ATOMIC flag set, and kvmalloc() cannot be used in this scenario.
So the other possible solution is to use flexible arrays instead of
contiguios arrays of memory so that the memory would be allocated
on a per-page basis.
This patchset replaces kvmalloc() with flex_array usage.
It consists of two parts:
* First patch is preparatory - it mechanically wraps all direct
access to assoc->stream.out[] and assoc->stream.in[] arrays
with SCTP_SO() and SCTP_SI() wrappers so that later a direct
array access could be easily changed to an access to a
flex_array (or any other possible alternative).
* Second patch replaces kmalloc_array() with flex_array usage.
v2 changes:
sctp_stream_in() users are updated to provide stream as an argument,
sctp_stream_{in,out}_ptr() are now just sctp_stream_{in,out}().
v3 changes:
Move type chages struct sctp_stream_out -> flex_array to next patch.
Make sctp_stream_{in,out}() static incline and move them to a header.
Performance results (single stream):
====================================
* Kernel: v4.18-rc6 - stock and with 2 patches from Oleg (earlier in this thread)
* Node: CPU (8 cores): Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
RAM: 32 Gb
* netperf: taken from https://github.com/HewlettPackard/netperf.git,
compiled from sources with sctp support
* netperf server and client are run on the same node
* ip link set lo mtu 1500
The script used to run tests:
# cat run_tests.sh
#!/bin/bash
for test in SCTP_STREAM SCTP_STREAM_MANY SCTP_RR SCTP_RR_MANY; do
echo "TEST: $test";
for i in `seq 1 3`; do
echo "Iteration: $i";
set -x
netperf -t $test -H localhost -p 22222 -S 200000,200000 -s 200000,200000 \
-l 60 -- -m 1452;
set +x
done
done
================================================
Results (a bit reformatted to be more readable):
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
v4.18-rc7 v4.18-rc7 + fixes
TEST: SCTP_STREAM
212992 212992 1452 60.21 1125.52 1247.04
212992 212992 1452 60.20 1376.38 1149.95
212992 212992 1452 60.20 1131.40 1163.85
TEST: SCTP_STREAM_MANY
212992 212992 1452 60.00 1111.00 1310.05
212992 212992 1452 60.00 1188.55 1130.50
212992 212992 1452 60.00 1108.06 1162.50
===========
Local /Remote
Socket Size Request Resp. Elapsed Trans.
Send Recv Size Size Time Rate
bytes Bytes bytes bytes secs. per sec
v4.18-rc7 v4.18-rc7 + fixes
TEST: SCTP_RR
212992 212992 1 1 60.00 45486.98 46089.43
212992 212992 1 1 60.00 45584.18 45994.21
212992 212992 1 1 60.00 45703.86 45720.84
TEST: SCTP_RR_MANY
212992 212992 1 1 60.00 40.75 40.77
212992 212992 1 1 60.00 40.58 40.08
212992 212992 1 1 60.00 39.98 39.97
Performance results for many streams:
=====================================
* Kernel: v4.18-rc8 - stock and with 2 patches v3
* Node: CPU (8 cores): Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
RAM: 32 Gb
* sctp_test: https://github.com/sctp/lksctp-tools
* both server and client are run on the same node
* ip link set lo mtu 1500
* sysctl -w vm.max_map_count=65530000 (need it to make memory fragmented)
The script used to run tests:
=============================
# cat run_sctp_test.sh
#!/bin/bash
set -x
uname -r
ip link set lo mtu 1500
swapoff -a
free
cat /proc/buddyinfo
./src/apps/sctp_test -H 127.0.0.1 -P 22222 -l -d 0 &
sleep 3
time ./src/apps/sctp_test -H 127.0.0.1 -P 22221 -h 127.0.0.1 -p 22222 \
-s -c 1 -M 65535 -T -t 1 -x 100000 -d 0 1>/dev/null
killall -9 lt-sctp_test
===============================
Results (a bit reformatted to be more readable):
1) ms stock kernel v4.18-rc8, no memory fragmentation
test 1 test 2 test 3
real 0m14.715s 0m14.593s 0m15.954s
user 0m0.954s 0m0.955s 0m0.854s
sys 0m13.388s 0m12.537s 0m13.749s
2) kernel with fixes, no memory fragmentation
test 1 test 2 test 3
real 0m14.959s 0m14.693s 0m14.762s
user 0m0.948s 0m0.921s 0m0.929s
sys 0m13.538s 0m13.225s 0m13.217s
3) kernel with fixes, memory fragmented
'free':
total used free shared buff/cache available
Mem: 32906008 30555200 302740 764 2048068 266452
Mem: 32906008 30379948 541436 764 1984624 442376
Mem: 32906008 30717312 262380 764 1926316 109908
/proc/buddyinfo:
Node 0, zone Normal 40773 37 34 29 0 0 0 0 0 0 0
Node 0, zone Normal 100332 68 8 4 2 1 1 0 0 0 0
Node 0, zone Normal 31113 7 2 1 0 0 0 0 0 0 0
test 1 test 2 test 3
real 0m14.159s 0m15.252s 0m15.826s
user 0m0.839s 0m1.004s 0m1.048s
sys 0m11.827s 0m14.240s 0m14.778s
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This path replaces physically contiguous memory arrays
allocated using kmalloc_array() with flexible arrays.
This enables to avoid memory allocation failures on the
systems under a memory stress.
Signed-off-by: Oleg Babin <obabin@virtuozzo.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces wrappers for accessing in/out streams indirectly.
This will enable to replace physically contiguous memory arrays
of streams with flexible arrays (or maybe any other appropriate
mechanism) which do memory allocation on a per-page basis.
Signed-off-by: Oleg Babin <obabin@virtuozzo.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updated README.
Added config file that contains the minimum required features enabled to
run the tests currently present in the kernel.
This must be updated when new unittests are created and require their own
modules.
Signed-off-by: Keara Leibovitz <kleib@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
l2tp: rework pppol2tp ioctl handling
The current ioctl() handling code can be simplified. It tests for
non-relevant conditions and uselessly holds sockets. Once useless
code is removed, it becomes even simpler to let pppol2tp_ioctl() handle
commands directly, rather than dispatch them to pppol2tp_tunnel_ioctl()
or pppol2tp_session_ioctl(). That is the approach taken by this series.
Patch #1 and #2 define helper functions aimed at simplifying the rest
of the patch set.
Patch #3 drops useless tests in pppol2p_ioctl() and avoid holding a
refcount on the socket.
Patches #4, #5 and #6 are the core of the series. They let
pppol2tp_ioctl() handle all ioctls and drop the tunnel and session
specific functions.
Then patch #6 brings a little bit of consolidation.
Finally, patch #7 takes advantage of the simplified code to make
pppol2tp sockets compatible with dev_ioctl(). Certainly not a killer
feature, but it is trivial and it is always nice to see l2tp getting
better integration with the rest of the stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return -ENOIOCTLCMD for unknown ioctl commands. This lets dev_ioctl()
handle generic socket ioctls like SIOCGIFNAME or SIOCGIFINDEX.
PF_PPPOX/PX_PROTO_OL2TP was one of the few socket types not honouring
this mechanism.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Integrate memset(0) in pppol2tp_copy_stats() to avoid calling it
manually every time.
While there, constify 'stats'.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
pppol2tp_ioctl() has everything in place for handling PPPIOCGL2TPSTATS
on session sockets. We just need to copy the stats and set ->session_id.
As a side effect of sharing session and tunnel code, ->using_ipsec is
properly set even when the request was made using a session socket.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle PPPIOCGL2TPSTATS in pppol2tp_ioctl() if the socket represents a
tunnel. This one is a bit special because the caller may use the tunnel
socket to retrieve statistics of one of its sessions. If the session_id
is set, the corresponding session's statistics are returned, instead of
those of the tunnel. This is handled by the new
pppol2tp_tunnel_copy_stats() helper function.
Set ->tunnel_id and ->using_ipsec out of the conditional, so
that it can be used by the 'else' branch in the following patch.
We cannot do that for ->session_id, because tunnel sockets have to
report the value that was originally passed in 'stats.session_id',
while session sockets have to report their own session_id.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let pppol2tp_ioctl() handle ioctl commands directly. It still relies on
pppol2tp_{session,tunnel}_ioctl() for PPPIOCGL2TPSTATS.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Drop test on 'sk': sock->sk cannot be NULL, or pppox_ioctl() could
not have called us.
* Drop test on 'SOCK_DEAD' state: if this flag was set, the socket
would be in the process of being released and no ioctl could be
running anymore.
* Drop test on 'PPPOX_*' state: we depend on ->sk_user_data to get
the session structure. If it is non-NULL, then the socket is
connected. Testing for PPPOX_* is redundant.
* Retrieve session using ->sk_user_data directly, instead of going
through pppol2tp_sock_to_session(). This avoids grabbing a useless
reference on the socket.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_get() is used for two different purposes. If 'tunnel' is
NULL, the session is searched globally in the supplied network
namespace. Otherwise it is searched exclusively in the tunnel context.
Callers always know the context in which they need to search the
session. But some of them do provide both a namespace and a tunnel,
making the semantic of the call unclear.
This patch defines l2tp_tunnel_get_session() for lookups done in a
tunnel and restricts l2tp_session_get() to namespace searches.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use helper function to figure out if a tunnel is using ipsec.
Also, avoid accessing ->sk_policy directly since it's RCU protected.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas says:
====================
netsec driver improvements
This patchset introduces some improvements on socionext netsec driver.
- patch 1/2, avoids unneeded MMIO reads on the Rx path
- patch 2/2, is adjusting the numbers of descriptors used
Changes since v1:
- Move dma_rmb() to protect descriptor accesses until the device
has updated the NETSEC_RX_PKT_OWN_FIELD bit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Increasing descriptors to 256 from 128 and adjusting the NAPI weight
to 64 increases performace on Rx by ~20% on 64byte packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
MMIO reads for remaining packets in queue occur (at least)twice per
invocation of netsec_process_rx(). We can use the packet descriptor to
identify if it's owned by the hardware and break out, avoiding the more
expensive MMIO read operations. This has a ~2% increase on the pps of the
Rx path when tested with 64byte packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/neterion/vxge/vxge-config.c:1097:6: warning:
variable 'ret' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-config.c:2263:6: warning:
variable 'req_out' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-config.c:2262:22: warning:
variable 'status' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-config.c:2360:22: warning:
variable 'status' set but not used [-Wunused-but-set-variable]
enum vxge_hw_status status = VXGE_HW_OK;
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim