The msk sk_shutdown flag is set by a workqueue, possibly
introducing some delay in user-space notification. If the last
subflow carries some data with the fin packet, the user space
can wake-up before RCV_SHUTDOWN is set. If it executes unblocking
recvmsg(), it may return with an error instead of eof.
Address the issue explicitly checking for eof in recvmsg(), when
no data is found.
Fixes: 59832e2465 ("mptcp: subflow: check parent mptcp socket on subflow state change")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.
This change addresses the issue by moving the token removal
into the msk destructor.
Fixes: 79c0949e9a ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a MP_JOIN subflow completes the 3whs while another
CPU is closing the master msk, we can hit the
following race:
CPU1 CPU2
close()
mptcp_close
subflow_syn_recv_sock
mptcp_token_get_sock
mptcp_finish_join
inet_sk_state_load
mptcp_token_destroy
inet_sk_state_store(TCP_CLOSE)
__mptcp_flush_join_list()
mptcp_sock_graft
list_add_tail
sk_common_release
sock_orphan()
<socket free>
The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.
This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently unblocking connect() on MPTCP sockets fails frequently.
If mptcp_stream_connect() is invoked to complete a previously
attempted unblocking connection, it will still try to create
the first subflow via __mptcp_socket_create(). If the 3whs is
completed and the 'can_ack' flag is already set, the latter
will fail with -EINVAL.
This change addresses the issue checking for pending connect and
delegating the completion to the first subflow. Additionally
do msk addresses and sk_state changes only when needed.
Fixes: 2303f994b3 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can try to coalesce skbs we take from the subflows rx queue with the
tail of the mptcp rx queue.
If successful, the skb head can be discarded early.
We can also free the skb extensions, we do not access them after this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
To prepare removing the global routing_ioctl hack start lifting the code
into a newly added ipv6 ->compat_ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp calls this from the transmit side, from process context.
Allow a sleeping allocation instead of unconditional GFP_ATOMIC.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
previous patches made sure we only call into this function
when these prerequisites are met, so no need to wait on the
subflow socket anymore.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/7
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp_sendmsg_frag helper contains a loop that will wait on the
subflow sk.
It seems preferrable to only wait in mptcp_sendmsg() when blocking io is
requested. mptcp_sendmsg already has such a wait loop that is used when
no subflow socket is available for transmission.
This is another preparation patch that makes sure we call
mptcp_sendmsg_frag only if the page frag cache has been refilled.
Followup patch will remove the wait loop from mptcp_sendmsg_frag().
The retransmit worker doesn't need to do this refill as it won't
transmit new mptcp-level data.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp_sendmsg_frag helper contains a loop that will wait on the
subflow sk.
It seems preferrable to only wait in mptcp_sendmsg() when blocking io is
requested. mptcp_sendmsg already has such a wait loop that is used when
no subflow socket is available for transmission.
This is a preparation patch that makes sure we call
mptcp_sendmsg_frag only if a skb extension has been allocated.
Moreover, such allocation currently uses GFP_ATOMIC while it
could use sleeping allocation instead.
Followup patches will remove the wait loop from mptcp_sendmsg_frag()
and will allow to do a sleeping allocation for the extension.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The transmit loop continues to xmit new data until an error is returned
or all data was transmitted.
For the blocking i/o case, this means that tcp_sendpages() may block on
the subflow until more space becomes available, i.e. we end up sleeping
with the mptcp socket lock held.
Instead we should check if a different subflow is ready to be used.
This restarts the subflow sk lookup when the tx operation succeeded
and the tcp subflow can't accept more data or if tcp_sendpages
indicates -EAGAIN on a blocking mptcp socket.
In that case we also need to set the NOSPACE bit to make sure we get
notified once memory becomes available.
In case all subflows are busy, the existing logic will wait until a
subflow is ready, releasing the mptcp socket lock while doing so.
The mptcp worker already sets DONTWAIT, so no need to make changes there.
v2:
* set NOSPACE bit
* add a comment to clarify that mptcp-sk sndbuf limits need to
be checked as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Its not enough to check for available tcp send space.
We also hold on to transmitted data for mptcp-level retransmits.
Right now we will send more and more data if the peer can ack data
at the tcp level fast enough, since that frees up tcp send buffer space.
But we also need to check that data was acked and reclaimed at the mptcp
level.
Therefore add needed check in mptcp_sendmsg, flush tcp data and
wait until more mptcp snd space becomes available if we are over the
limit. Before we wait for more data, also make sure we start the
retransmit timer if we ran out of sndbuf space.
Otherwise there is a very small chance that we wait forever:
* receiver is waiting for data
* sender is blocked because mptcp socket buffer is full
* at tcp level, all data was acked
* mptcp-level snd_una was not updated, because last ack
that acknowledged the last data packet carried an older
MPTCP-ack.
Restarting the retransmit timer avoids this problem: if TCP
subflow is idle, data is retransmitted from the RTX queue.
New data will make the peer send a new, updated MPTCP-Ack.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo noticed that ssk_check_wmem() has same pattern, so add/use
common helper for both places.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
MP_JOIN subflows must not land into the accept queue.
Currently tcp_check_req() calls an mptcp specific helper
to detect such scenario.
Such helper leverages the subflow context to check for
MP_JOIN subflows. We need to deal also with MP JOIN
failures, even when the subflow context is not available
due allocation failure.
A possible solution would be changing the syn_recv_sock()
signature to allow returning a more descriptive action/
error code and deal with that in tcp_check_req().
Since the above need is MPTCP specific, this patch instead
uses a TCP request socket hole to add a MPTCP specific flag.
Such flag is used by the MPTCP syn_recv_sock() to tell
tcp_check_req() how to deal with the request socket.
This change is a no-op for !MPTCP build, and makes the
MPTCP code simpler. It allows also the next patch to deal
correctly with MP JOIN failure.
v1 -> v2:
- be more conservative on drop_req initialization (Mat)
RFC -> v1:
- move the drop_req bit inside tcp_request_sock (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the other MPTCP-peer uses 32-bit data-sequence numbers, we rely on
map_seq to indicate how to expand to a 64-bit data-sequence number in
expand_seq() when receiving data.
For new subflows, this field is not initialized, thus results in an
"invalid" mapping being discarded.
Fix this by initializing map_seq upon subflow establishment time.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo points out that mptcp_disconnect is bogus:
"lock_sock(sk);
looks suspicious (lock should be already held by the caller)
And call to: tcp_disconnect(sk, flags); too, sk is not a tcp
socket".
->disconnect() gets called from e.g. inet_stream_connect when
one tries to disassociate a connected socket again (to re-connect
without closing the socket first).
MPTCP however uses mptcp_stream_connect, not inet_stream_connect,
for the mptcp-socket connect call.
inet_stream_connect only gets called indirectly, for the tcp socket,
so any ->disconnect() calls end up calling tcp_disconnect for that
tcp subflow sk.
This also explains why syzkaller has not yet reported a problem
here. So for now replace this with a stub that doesn't do anything.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/14
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need them, as we can use the current ingress opt
data instead. Setting them in syn_recv_sock() may causes
inconsistent mptcp socket status, as per previous commit.
Fixes: cc7972ea19 ("mptcp: parse and emit MP_CAPABLE option according to v1 spec")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following splat can occur during self test:
BUG: KASAN: use-after-free in subflow_data_ready+0x156/0x160
Read of size 8 at addr ffff888100c35c28 by task mptcp_connect/4808
subflow_data_ready+0x156/0x160
tcp_child_process+0x6a3/0xb30
tcp_v4_rcv+0x2231/0x3730
ip_protocol_deliver_rcu+0x5c/0x860
ip_local_deliver_finish+0x220/0x360
ip_local_deliver+0x1c8/0x4e0
ip_rcv_finish+0x1da/0x2f0
ip_rcv+0xd0/0x3c0
__netif_receive_skb_one_core+0xf5/0x160
__netif_receive_skb+0x27/0x1c0
process_backlog+0x21e/0x780
net_rx_action+0x35f/0xe90
do_softirq+0x4c/0x50
[..]
This occurs when accessing subflow_ctx->conn.
Problem is that tcp_child_process() calls listen sockets'
sk_data_ready() notification, but it doesn't hold the listener
lock. Another cpu calling close() on the listener will then cause
transition of refcount to 0.
Fixes: 58b0991962 ("mptcp: create msk early")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to set sk_state to CLOSED, else we will get following:
IPv4: Attempt to release TCP socket in state 3 00000000b95f109e
IPv4: Attempt to release TCP socket in state 10 00000000b95f109e
First one is from inet_sock_destruct(), second one from
mptcp_sk_clone failure handling. Setting sk_state to CLOSED isn't
enough, we also need to orphan sk so it has DEAD flag set.
Otherwise, a very similar warning is printed from inet_sock_destruct().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following snippet (replicated from syzkaller reproducer) generates
warning: "IPv4: Attempt to release TCP socket in state 1".
int main(void) {
struct sockaddr_in sin1 = { .sin_family = 2, .sin_port = 0x4e20,
.sin_addr.s_addr = 0x010000e0, };
struct sockaddr_in sin2 = { .sin_family = 2,
.sin_addr.s_addr = 0x0100007f, };
struct sockaddr_in sin3 = { .sin_family = 2, .sin_port = 0x4e20,
.sin_addr.s_addr = 0x0100007f, };
int r0 = socket(0x2, 0x1, 0x106);
int r1 = socket(0x2, 0x1, 0x106);
bind(r1, (void *)&sin1, sizeof(sin1));
connect(r1, (void *)&sin2, sizeof(sin2));
listen(r1, 3);
return connect(r0, (void *)&sin3, 0x4d);
}
Reason is that the newly generated mptcp socket is closed via the ulp
release of the tcp listener socket when its accept backlog gets purged.
To fix this, delay setting the ESTABLISHED state until after userspace
calls accept and via mptcp specific destructor.
Fixes: 58b0991962 ("mptcp: create msk early")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/9
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_connect/28740 is trying to release lock (sk_lock-AF_INET) at:
[<ffffffff82c15869>] mptcp_poll+0xb9/0x550
but there are no more locks to release!
Call Trace:
lock_release+0x50f/0x750
release_sock+0x171/0x1b0
mptcp_poll+0xb9/0x550
sock_poll+0x157/0x470
? get_net_ns+0xb0/0xb0
do_sys_poll+0x63c/0xdd0
Problem is that __mptcp_tcp_fallback() releases the mptcp socket lock,
but after recent change it doesn't do this in all of its return paths.
To fix this, remove the unlock from __mptcp_tcp_fallback() and
always do the unlock in the caller.
Also add a small comment as to why we have this
__mptcp_needs_tcp_fallback().
Fixes: 0b4f33def7 ("mptcp: fix tcp fallback crash")
Reported-by: syzbot+e56606435b7bfeea8cf5@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_subflow_data_available() is commonly called via
ssk->sk_data_ready(), in this case the mptcp socket lock
cannot be acquired.
Therefore, while we can safely discard subflow data that
was already received up to msk->ack_seq, we cannot be sure
that 'subflow->data_avail' will still be valid at the time
userspace wants to read the data -- a previous read on a
different subflow might have carried this data already.
In that (unlikely) event, msk->ack_seq will have been updated
and will be ahead of the subflow dsn.
We can check for this condition and skip/resync to the expected
sequence number.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed at least until proper MPTCP-Level fin/reset
signalling gets added:
We wake parent when a subflow changes, but we should do this only
when all subflows have closed, not just one.
Schedule the mptcp worker and tell it to check eof state on all
subflows.
Only flag mptcp socket as closed and wake userspace processes blocking
in poll if all subflows have closed.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Paasch reports following crash:
general protection fault [..]
CPU: 0 PID: 2874 Comm: syz-executor072 Not tainted 5.6.0-rc5 #62
RIP: 0010:__pv_queued_spin_lock_slowpath kernel/locking/qspinlock.c:471
[..]
queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:50 [inline]
do_raw_spin_lock include/linux/spinlock.h:181 [inline]
spin_lock_bh include/linux/spinlock.h:343 [inline]
__mptcp_flush_join_list+0x44/0xb0 net/mptcp/protocol.c:278
mptcp_shutdown+0xb3/0x230 net/mptcp/protocol.c:1882
[..]
Problem is that mptcp_shutdown() socket isn't an mptcp socket,
its a plain tcp_sk. Thus, trying to access mptcp_sk specific
members accesses garbage.
Root cause is that accept() returns a fallback (tcp) socket, not an mptcp
one. There is code in getpeername to detect this and override the sockets
stream_ops. But this will only run when accept() caller provided a
sockaddr struct. "accept(fd, NULL, 0)" will therefore result in
mptcp stream ops, but with sock->sk pointing at a tcp_sk.
Update the existing fallback handling to detect this as well.
Moreover, mptcp_shutdown did not have fallback handling, and
mptcp_poll did it too late so add that there as well.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Exported via same /proc file as the Linux TCP MIB counters, so "netstat -s"
or "nstat" will show them automatically.
The MPTCP MIB counters are allocated in a distinct pcpu area in order to
avoid bloating/wasting TCP pcpu memory.
Counters are allocated once the first MPTCP socket is created in a
network namespace and free'd on exit.
If no sockets have been allocated, all-zero mptcp counters are shown.
The MIB counter list is taken from the multipath-tcp.org kernel, but
only a few counters have been picked up so far. The counter list can
be increased at any time later on.
v2 -> v3:
- remove 'inline' in foo.c files (David S. Miller)
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On timeout event, schedule a work queue to do the retransmission.
Retransmission code closely resembles the sendmsg() implementation and
re-uses mptcp_sendmsg_frag, providing a dummy msghdr - for flags'
sake - and peeking the relevant dfrag from the rtx head.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will simplify mptcp-level retransmission implementation
in the next patch. If dfrag is provided by the caller, skip
kernel space memory allocation and use data and metadata
provided by the dfrag itself.
Because a peer could ack data at TCP level but refrain from
sending mptcp-level ACKs, we could grow the mptcp socket
backlog indefinitely.
We should thus block mptcp_sendmsg until the peer has acked some of the
sent data.
In order to be able to do so, increment the mptcp socket wmem_queued
counter on memory allocation and decrement it when releasing the memory
on mptcp-level ack reception.
Because TCP performns sndbuf auto-tuning up to tcp_wmem_max[2], make
this the mptcp sk_sndbuf limit.
In the future we could add experiment with autotuning as TCP does in
tcp_sndbuf_expand().
v2 -> v3:
- remove 'inline' in foo.c files (David S. Miller)
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After adding wmem accounting for the mptcp socket we could get
into a situation where the mptcp socket can't transmit more data,
and mptcp_clean_una doesn't reduce wmem even if snd_una has advanced
because it currently will only remove entire dfrags.
Allow advancing the dfrag head sequence and reduce wmem,
even though this isn't correct (as we can't release the page).
Because we will soon block on mptcp sk in case wmem is too large,
call sk_stream_write_space() in case we reduced the backlog so
userspace task blocked in sendmsg or poll will be woken up.
This isn't an issue if the send buffer is large, but it is when
SO_SNDBUF is used to reduce it to a lower value.
Note we can still get a deadlock for low SO_SNDBUF values in
case both sides of the connection write to the socket: both could
be blocked due to wmem being too small -- and current mptcp stack
will only increment mptcp ack_seq on recv.
This doesn't happen with the selftest as it uses poll() and
will always call recv if there is data to read.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Charge the data on the rtx queue to the master MPTCP socket, too.
Such memory in uncharged when the data is acked/dequeued.
Also account mptcp sockets inuse via a protocol specific pcpu
counter.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timer will be used to schedule retransmission. It's
frequency is based on the current subflow RTO estimation and
is reset on every una_seq update
The timer is clearer for good by __mptcp_clear_xmit()
Also clean MPTCP rtx queue before each transmission.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep the send page fragment on an MPTCP level retransmission queue.
The queue entries are allocated inside the page frag allocator,
acquiring an additional reference to the page for each list entry.
Also switch to a custom page frag refill function, to ensure that
the current page fragment can always host an MPTCP rtx queue entry.
The MPTCP rtx queue is flushed at disconnect() and close() time
Note that now we need to call __mptcp_init_sock() regardless of mptcp
enable status, as the destructor will try to walk the rtx_queue.
v2 -> v3:
- remove 'inline' in foo.c files (David S. Miller)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we keep per unacked sequence number consistent; since
we update per msk data, use an atomic64 cmpxchg() to protect
against concurrent updates from multiple subflows.
Initialize the snd_una at connect()/accept() time.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fill in more path manager functionality by adding a worker function and
modifying the related stub functions to schedule the worker.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subflow creation may be initiated by the path manager when
the primary connection is fully established and a remote
address has been received via ADD_ADDR.
Create an in-kernel sock and use kernel_connect() to
initiate connection.
Passive sockets can't acquire the mptcp socket lock at
subflow creation time, so an additional list protected by
a new spinlock is used to track the MPJ subflows.
Such list is spliced into conn_list tail every time the msk
socket lock is acquired, so that it will not interfere
with data flow on the original connection.
Data flow and connection failover not addressed by this commit.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Process the MP_JOIN option in a SYN packet with the same flow
as MP_CAPABLE but when the third ACK is received add the
subflow to the MPTCP socket subflow list instead of adding it to
the TCP socket accept queue.
The subflow is added at the end of the subflow list so it will not
interfere with the existing subflows operation and no data is
expected to be transmitted on it.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add enough of a path manager interface to allow sending of ADD_ADDR
when an incoming MPTCP connection is created. Capable of sending only
a single IPv4 ADD_ADDR option. The 'pm_data' element of the connection
sock will need to be expanded to handle multiple interfaces and IPv6.
Partial processing of the incoming ADD_ADDR is included so the path
manager notification of that event happens at the proper time, which
involves validating the incoming address information.
This is a skeleton interface definition for events generated by
MPTCP.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
it's still possible for packetdrill to hang in mptcp_sendmsg(), when the
MPTCP socket falls back to regular TCP (e.g. after receiving unsupported
flags/version during the three-way handshake). Adjust MPTCP socket state
earlier, to ensure correct functionality of mptcp_sendmsg() even in case
of TCP fallback.
Fixes: 767d3ded5f ("net: mptcp: don't hang before sending 'MP capable with data'")
Fixes: 1954b86016 ("mptcp: Check connection state before attempting send")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 58b0991962 ("mptcp: create msk early"), the
msk socket is already available at subflow_syn_recv_sock()
time. Let's move there the state update, to mirror more
closely the first subflow state.
The above will also help multiple subflow supports.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change moves the mptcp socket allocation from mptcp_accept() to
subflow_syn_recv_sock(), so that subflow->conn is now always set
for the non fallback scenario.
It allows cleaning up a bit mptcp_accept() reducing the additional
locking and will allow fourther cleanup in the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp rcvbuf size is adjusted according to the subflow rcvbuf size.
This should not be done if userspace did set a fixed value.
Fixes: 600911ff5f ("mptcp: add rmem queue accounting")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of reading the MPTCP-level sequence number when sending DATA_FIN,
store the data in the subflow so it can be safely accessed when the
subflow TCP headers are written to the packet without the MPTCP-level
lock held. This also allows the MPTCP-level socket to close individual
subflows without closing the MPTCP connection.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP should wait for an active connection or skip sending depending on
the connection state, as TCP does. This happens before the possible
passthrough to a regular TCP sendmsg because the subflow's socket type
(MPTCP or TCP fallback) is not known until the connection is
complete. This is also relevent at disconnect time, where data should
not be sent in certain MPTCP-level connection states.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp conflict was overlapping additions.
The SMC conflict was an additional and removal happening at the same
time.
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't schedule the work queue right away, instead defer this
to the lock release callback.
This has the advantage that it will give recv path a chance to
complete -- this might have moved all pending packets from the
subflow to the mptcp receive queue, which allows to avoid the
schedule_work().
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni