Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
Replace open-coded bitmap array initialization of init_mm.cpu_bitmask with
neat CPU_BITS_NONE macro.
And, since init_mm.cpu_bitmask is statically set to zero, there is no way
to clear it again in start_kernel().
Link: http://lkml.kernel.org/r/1565703815-8584-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.
Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init(). Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.
Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().
Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Will Deacon <will@kernel.org> [arm64]
Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently kmemleak uses a static early_log buffer to trace all memory
allocation/freeing before the slab allocator is initialised. Such early
log is replayed during kmemleak_init() to properly initialise the kmemleak
metadata for objects allocated up that point. With a memory pool that
does not rely on the slab allocator, it is possible to skip this early log
entirely.
In order to remove the early logging, consider kmemleak_enabled == 1 by
default while the kmem_cache availability is checked directly on the
object_cache and scan_area_cache variables. The RCU callback is only
invoked after object_cache has been initialised as we wouldn't have any
concurrent list traversal before this.
In order to reduce the number of callbacks before kmemleak is fully
initialised, move the kmemleak_init() call to mm_init().
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: remove WARN_ON(), per Catalin]
Link: http://lkml.kernel.org/r/20190812160642.52134-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Summary of modules changes for the 5.4 merge window:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing kernel
developers to better manage the export surface, allow subsystem
maintainers to explicitly state that usage of some exported symbols
should only be limited to certain users (think: inter-module or
inter-driver symbols, debugging symbols, etc), as well as more easily
limiting the availability of namespaced symbols to other parts of the
kernel. With the module import requirement, it is also easier to spot
the misuse of exported symbols during patch review. Two new macros are
introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is
thoroughly documented in Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there.
-----BEGIN PGP SIGNATURE-----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=72Uy
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"The main bulk of this pull request introduces a new exported symbol
namespaces feature. The number of exported symbols is increasingly
growing with each release (we're at about 31k exports as of 5.3-rc7)
and we currently have no way of visualizing how these symbols are
"clustered" or making sense of this huge export surface.
Namespacing exported symbols allows kernel developers to more
explicitly partition and categorize exported symbols, as well as more
easily limiting the availability of namespaced symbols to other parts
of the kernel. For starters, we have introduced the USB_STORAGE
namespace to demonstrate the API's usage. I have briefly summarized
the feature and its main motivations in the tag below.
Summary:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing
kernel developers to better manage the export surface, allow
subsystem maintainers to explicitly state that usage of some
exported symbols should only be limited to certain users (think:
inter-module or inter-driver symbols, debugging symbols, etc), as
well as more easily limiting the availability of namespaced symbols
to other parts of the kernel.
With the module import requirement, it is also easier to spot the
misuse of exported symbols during patch review.
Two new macros are introduced: EXPORT_SYMBOL_NS() and
EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there"
* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove leftover '#undef' from export header
module: remove unneeded casts in cmp_name()
module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
module: remove redundant 'depends on MODULES'
module: Fix link failure due to invalid relocation on namespace offset
usb-storage: export symbols in USB_STORAGE namespace
usb-storage: remove single-use define for debugging
docs: Add documentation for Symbol Namespaces
scripts: Coccinelle script for namespace dependencies.
modpost: add support for generating namespace dependencies
export: allow definition default namespaces in Makefiles or sources
module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
modpost: add support for symbol namespaces
module: add support for symbol namespaces.
export: explicitly align struct kernel_symbol
module: support reading multiple values per modinfo tag
- virtio support
- Fixes for our new time travel mode
- Various improvements to make lockdep and kasan work better
- SPDX header updates
-----BEGIN PGP SIGNATURE-----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=oxpp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- virtio support
- fixes for our new time travel mode
- various improvements to make lockdep and kasan work better
- SPDX header updates
* tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (25 commits)
um: irq: Fix LAST_IRQ usage in init_IRQ()
um: Add SPDX headers for files in arch/um/include
um: Add SPDX headers for files in arch/um/os-Linux
um: Add SPDX headers to files in arch/um/kernel/
um: Add SPDX headers for files in arch/um/drivers
um: virtio: Implement VHOST_USER_PROTOCOL_F_REPLY_ACK
um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ
um: drivers: Add virtio vhost-user driver
um: Use real DMA barriers
um: Don't use generic barrier.h
um: time-travel: Restrict time update in IRQ handler
um: time-travel: Fix periodic timers
um: Enable CONFIG_CONSTRUCTORS
um: Place (soft)irq text with macros
um: Fix VDSO compiler warning
um: Implement TRACE_IRQFLAGS_SUPPORT
um: Remove misleading #define ARCh_IRQ_ENABLED
um: Avoid using uninitialized regs
um: Remove sig_info[SIGALRM]
um: Error handling fixes in vector drivers
...
gcc 9+ (and gcc 8.3, 7.5) provides a way to override the otherwise
crude heuristic that gcc uses to estimate the size of the code
represented by an asm() statement. From the gcc docs
If you use 'asm inline' instead of just 'asm', then for inlining
purposes the size of the asm is taken as the minimum size, ignoring
how many instructions GCC thinks it is.
For compatibility with older compilers, we obviously want a
#if [understands asm inline]
#define asm_inline asm inline
#else
#define asm_inline asm
#endif
But since we #define the identifier inline to attach some attributes,
we have to use an alternate spelling of that keyword. gcc provides
both __inline__ and __inline, and we currently #define both to inline,
so they all have the same semantics. We have to free up one of
__inline__ and __inline, and the latter is by far the easiest.
The two x86 changes cause smaller code gen differences than I'd
expect, but I think we do want the asm_inline thing available sooner
or later, so this is just to get the ball rolling.
-----BEGIN PGP SIGNATURE-----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=+BVw
-----END PGP SIGNATURE-----
Merge tag 'compiler-attributes-for-linus-v5.4' of git://github.com/ojeda/linux
Pull asm inline support from Miguel Ojeda:
"Make use of gcc 9's "asm inline()" (Rasmus Villemoes):
gcc 9+ (and gcc 8.3, 7.5) provides a way to override the otherwise
crude heuristic that gcc uses to estimate the size of the code
represented by an asm() statement. From the gcc docs
If you use 'asm inline' instead of just 'asm', then for inlining
purposes the size of the asm is taken as the minimum size, ignoring
how many instructions GCC thinks it is.
For compatibility with older compilers, we obviously want a
#if [understands asm inline]
#define asm_inline asm inline
#else
#define asm_inline asm
#endif
But since we #define the identifier inline to attach some attributes,
we have to use an alternate spelling of that keyword. gcc provides
both __inline__ and __inline, and we currently #define both to inline,
so they all have the same semantics.
We have to free up one of __inline__ and __inline, and the latter is
by far the easiest.
The two x86 changes cause smaller code gen differences than I'd
expect, but I think we do want the asm_inline thing available sooner
or later, so this is just to get the ball rolling"
* tag 'compiler-attributes-for-linus-v5.4' of git://github.com/ojeda/linux:
x86: bug.h: use asm_inline in _BUG_FLAGS definitions
x86: alternative.h: use asm_inline for all alternative variants
compiler-types.h: add asm_inline definition
compiler_types.h: don't #define __inline
lib/zstd/mem.h: replace __inline by inline
staging: rtl8723bs: replace __inline by inline
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build
in unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=VGqV
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build in
unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
genksyms: convert to SPDX License Identifier for lex.l and parse.y
modpost: use __section in the output to *.mod.c
modpost: use MODULE_INFO() for __module_depends
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
export.h: remove defined(__KERNEL__), which is no longer needed
kbuild: allow Clang to find unused static inline functions for W=1 build
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
kbuild: refactor scripts/Makefile.extrawarn
merge_config.sh: ignore unwanted grep errors
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
modpost: add NOFAIL to strndup
modpost: add guid_t type definition
kbuild: add $(BASH) to run scripts with bash-extension
kbuild: remove ARCH_{CPP,A,C}FLAGS
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
kbuild: clean up subdir-ymn calculation in Makefile.clean
kbuild: remove unneeded '+' marker from cmd_clean
kbuild: remove clean-dirs syntax
kbuild: check clean srctree even earlier
...
Pull misc mount API conversions from Al Viro:
"Conversions to new API for shmem and friends and for mount_mtd()-using
filesystems.
As for the rest of the mount API conversions in -next, some of them
belong in the individual trees (e.g. binderfs one should definitely go
through android folks, after getting redone on top of their changes).
I'm going to drop those and send the rest (trivial ones + stuff ACKed
by maintainers) in a separate series - by that point they are
independent from each other.
Some stuff has already migrated into individual trees (NFS conversion,
for example, or FUSE stuff, etc.); those presumably will go through
the regular merges from corresponding trees."
* 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Make fs_parse() handle fs_param_is_fd-type params better
vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API
shmem_parse_one(): switch to use of fs_parse()
shmem_parse_options(): take handling a single option into a helper
shmem_parse_options(): don't bother with mpol in separate variable
shmem_parse_options(): use a separate structure to keep the results
make shmem_fill_super() static
make ramfs_fill_super() static
devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()
vfs: Convert squashfs to use the new mount API
mtd: Kill mount_mtd()
vfs: Convert jffs2 to use the new mount API
vfs: Convert cramfs to use the new mount API
vfs: Convert romfs to use the new mount API
vfs: Add a single-or-reconfig keying to vfs_get_super()
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
Pull scheduler updates from Ingo Molnar:
- MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.
As perf and the scheduler is getting bigger and more complex,
document the status quo of current responsibilities and interests,
and spread the review pain^H^H^H^H fun via an increase in the Cc:
linecount generated by scripts/get_maintainer.pl. :-)
- Add another series of patches that brings the -rt (PREEMPT_RT) tree
closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
into a new CONFIG_PREEMPTION category that will allow the eventual
introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
to go though.
- Extend the CPU cgroup controller with uclamp.min and uclamp.max to
allow the finer shaping of CPU bandwidth usage.
- Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).
- Improve the behavior of high CPU count, high thread count
applications running under cpu.cfs_quota_us constraints.
- Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.
- Improve CPU isolation housekeeping CPU allocation NUMA locality.
- Fix deadline scheduler bandwidth calculations and logic when cpusets
rebuilds the topology, or when it gets deadline-throttled while it's
being offlined.
- Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
setscheduler() system calls without creating global serialization.
Add new synchronization between cpuset topology-changing events and
the deadline acceptance tests in setscheduler(), which were broken
before.
- Rework the active_mm state machine to be less confusing and more
optimal.
- Rework (simplify) the pick_next_task() slowpath.
- Improve load-balancing on AMD EPYC systems.
- ... and misc cleanups, smaller fixes and improvements - please see
the Git log for more details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
sched/psi: Correct overly pessimistic size calculation
sched/fair: Speed-up energy-aware wake-ups
sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
sched/uclamp: Update CPU's refcount on TG's clamp changes
sched/uclamp: Use TG's clamps to restrict TASK's clamps
sched/uclamp: Propagate system defaults to the root group
sched/uclamp: Propagate parent clamps
sched/uclamp: Extend CPU's cgroup controller
sched/topology: Improve load balancing on AMD EPYC systems
arch, ia64: Make NUMA select SMP
sched, perf: MAINTAINERS update, add submaintainers and reviewers
sched/fair: Use rq_lock/unlock in online_fair_sched_group
cpufreq: schedutil: fix equation in comment
sched: Rework pick_next_task() slow-path
sched: Allow put_prev_task() to drop rq->lock
sched/fair: Expose newidle_balance()
sched: Add task_struct pointer to sched_class::set_curr_task
sched: Rework CPU hotplug task selection
sched/{rt,deadline}: Fix set_next_task vs pick_next_task
sched: Fix kerneldoc comment for ia64_set_curr_task
...
We do need to call the constructors for *modules*, and
at least for KASAN in the future, we must call even the
kernel constructors only later when the kernel has been
initialized.
Instead of relying on libc to call them, emit an empty
section for libc and let the kernel's CONSTRUCTORS code
do the rest of the job.
Tested that it indeed doesn't work in modules, and does
work after the fixes in both, with a few functions with
__attribute__((constructor)) in both dynamic and static
builds.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This adds an asm_inline macro which expands to "asm inline" [1] when
the compiler supports it. This is currently gcc 9.1+, gcc 8.3
and (once released) gcc 7.5 [2]. It expands to just "asm" for other
compilers.
Using asm inline("foo") instead of asm("foo") overrules gcc's
heuristic estimate of the size of the code represented by the asm()
statement, and makes gcc use the minimum possible size instead. That
can in turn affect gcc's inlining decisions.
I wasn't sure whether to make this a function-like macro or not - this
way, it can be combined with volatile as
asm_inline volatile()
but perhaps we'd prefer to spell that
asm_inline_volatile()
anyway.
The Kconfig logic is taken from an RFC patch by Masahiro Yamada [3].
[1] Technically, asm __inline, since both inline and __inline__
are macros that attach various attributes, making gcc barf if one
literally does "asm inline()". However, the third spelling __inline is
available for referring to the bare keyword.
[2] https://lore.kernel.org/lkml/20190907001411.GG9749@gate.crashing.org/
[3] https://lore.kernel.org/lkml/1544695154-15250-1-git-send-email-yamada.masahiro@socionext.com/
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Convert the ramfs, shmem, tmpfs, devtmpfs and rootfs filesystems to the new
internal mount API as the old one will be obsoleted and removed. This
allows greater flexibility in communication of mount parameters between
userspace, the VFS and the filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Note that tmpfs is slightly tricky as it can contain embedded commas, so it
can't be trivially split up using strsep() to break on commas in
generic_parse_monolithic(). Instead, tmpfs has to supply its own generic
parser.
However, if tmpfs changes, then devtmpfs and rootfs, which are wrappers
around tmpfs or ramfs, must change too - and thus so must ramfs, so these
had to be converted also.
[AV: rewritten]
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hugh Dickins <hughd@google.com>
cc: linux-mm@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When CONFIG_MODULES is disabled, CONFIG_UNUSED_SYMBOLS is pointless,
thus it should be invisible.
Instead of adding "depends on MODULES", I moved it to the sub-menu
"Enable loadable module support", which is a better fit. I put it
close to TRIM_UNUSED_KSYMS because it depends on !UNUSED_SYMBOLS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
These are located in the 'if MODULES' ... 'endif' block.
Remove the redundant dependencies.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
If MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is enabled (default=n), the
requirement for modules to import all namespaces that are used by
the module is relaxed.
Enabling this option effectively allows (invalid) modules to be loaded
while only a warning is emitted.
Disabling this option keeps the enforcement at module loading time and
loading is denied if the module's imports are not satisfactory.
Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
arch/arc/Makefile overrides -O2 with -O3. This is the only user of
ARCH_CFLAGS. There is no user of ARCH_CPPFLAGS or ARCH_AFLAGS.
My plan is to remove ARCH_{CPP,A,C}FLAGS after refactoring the ARC
Makefile.
Currently, ARC has no way to enable -Wmaybe-uninitialized because both
-O3 and -Os disable it. Enabling it will be useful for compile-testing.
This commit allows allmodconfig (, which defaults to -O2) to enable it.
Add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y to all the defconfig files
in arch/arc/configs/ in order to keep the current config settings.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
The cgroup CPU bandwidth controller allows to assign a specified
(maximum) bandwidth to the tasks of a group. However this bandwidth is
defined and enforced only on a temporal base, without considering the
actual frequency a CPU is running on. Thus, the amount of computation
completed by a task within an allocated bandwidth can be very different
depending on the actual frequency the CPU is running that task.
The amount of computation can be affected also by the specific CPU a
task is running on, especially when running on asymmetric capacity
systems like Arm's big.LITTLE.
With the availability of schedutil, the scheduler is now able
to drive frequency selections based on actual task utilization.
Moreover, the utilization clamping support provides a mechanism to
bias the frequency selection operated by schedutil depending on
constraints assigned to the tasks currently RUNNABLE on a CPU.
Giving the mechanisms described above, it is now possible to extend the
cpu controller to specify the minimum (or maximum) utilization which
should be considered for tasks RUNNABLE on a cpu.
This makes it possible to better defined the actual computational
power assigned to task groups, thus improving the cgroup CPU bandwidth
controller which is currently based just on time constraints.
Extend the CPU controller with a couple of new attributes uclamp.{min,max}
which allow to enforce utilization boosting and capping for all the
tasks in a group.
Specifically:
- uclamp.min: defines the minimum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run at least at a
minimum frequency which corresponds to the uclamp.min
utilization
- uclamp.max: defines the maximum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run up to a
maximum frequency which corresponds to the uclamp.max
utilization
These attributes:
a) are available only for non-root nodes, both on default and legacy
hierarchies, while system wide clamps are defined by a generic
interface which does not depends on cgroups. This system wide
interface enforces constraints on tasks in the root node.
b) enforce effective constraints at each level of the hierarchy which
are a restriction of the group requests considering its parent's
effective constraints. Root group effective constraints are defined
by the system wide interface.
This mechanism allows each (non-root) level of the hierarchy to:
- request whatever clamp values it would like to get
- effectively get only up to the maximum amount allowed by its parent
c) have higher priority than task-specific clamps, defined via
sched_setattr(), thus allowing to control and restrict task requests.
Add two new attributes to the cpu controller to collect "requested"
clamp values. Allow that at each non-root level of the hierarchy.
Keep it simple by not caring now about "effective" values computation
and propagation along the hierarchy.
Update sysctl_sched_uclamp_handler() to use the newly introduced
uclamp_mutex so that we serialize system default updates with cgroup
relate updates.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CONFIG_CC_OPTIMIZE_FOR_SIZE was originally an independent boolean
option, but commit 877417e6ff ("Kbuild: change CC_OPTIMIZE_FOR_SIZE
definition") turned it into a choice between _PERFORMANCE and _SIZE.
The phrase "If unsure, say N." sounds like an independent option.
Reword the help text to make it appropriate for the choice menu.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.
scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
This reverts commit 71c67a31f0.
Commit 117acf5c29 ("powerpc/Makefile: Always pass --synthetic to nm if
supported") removed the only conditional definition of $(NM), so we can
revert our temporary bodge to avoid Kconfig recursion and go back to
passing $(NM) through to the 'tools-support-relr.sh' when detecting
support for RELR relocations.
Signed-off-by: Will Deacon <will@kernel.org>
If the kernel is locked down, require that all modules have valid
signatures that we can verify.
I have adjusted the errors generated:
(1) If there's no signature (ENODATA) or we can't check it (ENOPKG,
ENOKEY), then:
(a) If signatures are enforced then EKEYREJECTED is returned.
(b) If there's no signature or we can't check it, but the kernel is
locked down then EPERM is returned (this is then consistent with
other lockdown cases).
(2) If the signature is unparseable (EBADMSG, EINVAL), the signature fails
the check (EKEYREJECTED) or a system error occurs (eg. ENOMEM), we
return the error we got.
Note that the X.509 code doesn't check for key expiry as the RTC might not
be valid or might not have been transferred to the kernel's clock yet.
[Modified by Matthew Garrett to remove the IMA integration. This will
be replaced with integration with the IMA architecture policy
patchset.]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <matthewgarrett@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Jessica Yu <jeyu@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
The lockdown module is intended to allow for kernels to be locked down
early in boot - sufficiently early that we don't have the ability to
kmalloc() yet. Add support for early initialisation of some LSMs, and
then add them to the list of names when we do full initialisation later.
Early LSMs are initialised in link order and cannot be overridden via
boot parameters, and cannot make use of kmalloc() (since the allocator
isn't initialised yet).
(Fixed by Stephen Rothwell to include a stub to fix builds when
!CONFIG_SECURITY)
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: James Morris <jmorris@namei.org>
Update the build scripts and the version magic to reflect when
CONFIG_PREEMPT_RT is enabled in the same way as CONFIG_PREEMPT is treated.
The resulting version strings:
Linux m 5.3.0-rc1+ #100 SMP Fri Jul 26 ...
Linux m 5.3.0-rc1+ #101 SMP PREEMPT Fri Jul 26 ...
Linux m 5.3.0-rc1+ #102 SMP PREEMPT_RT Fri Jul 26 ...
The module vermagic:
5.3.0-rc1+ SMP mod_unload modversions
5.3.0-rc1+ SMP preempt mod_unload modversions
5.3.0-rc1+ SMP preempt_rt mod_unload modversions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 5cf896fb6b ("arm64: Add support for relocating the kernel with
RELR relocations") introduced CONFIG_TOOLS_SUPPORT_RELR, which checks
for RELR support in the toolchain as part of the kernel configuration.
During this procedure, "$(NM)" is invoked to see if it supports the new
relocation format, however PowerPC conditionally overrides this variable
in the architecture Makefile in order to pass '--synthetic' when
targetting PPC64.
This conditional override causes Kconfig to recurse forever, since
CONFIG_TOOLS_SUPPORT_RELR cannot be determined without $(NM) being
defined, but that in turn depends on CONFIG_PPC64:
$ make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
[...]
In this particular case, it looks like PowerPC may be able to pass
'--synthetic' unconditionally to nm or even drop it altogether. While
that is being resolved, let's just bodge the RELR check by picking up
$(NM) directly from the environment in whatever state it happens to be
in.
Cc: Peter Collingbourne <pcc@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
IMA will use the module_signature format for append signatures, so export
the relevant definitions and factor out the code which verifies that the
appended signature trailer is valid.
Also, create a CONFIG_MODULE_SIG_FORMAT option so that IMA can select it
and be able to use mod_check_sig() without having to depend on either
CONFIG_MODULE_SIG or CONFIG_MODULES.
s390 duplicated the definition of struct module_signature so now they can
use the new <linux/module_signature.h> header instead.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
RELR is a relocation packing format for relative relocations.
The format is described in a generic-abi proposal:
https://groups.google.com/d/topic/generic-abi/bX460iggiKg/discussion
The LLD linker can be instructed to pack relocations in the RELR
format by passing the flag --pack-dyn-relocs=relr.
This patch adds a new config option, CONFIG_RELR. Enabling this option
instructs the linker to pack vmlinux's relative relocations in the RELR
format, and causes the kernel to apply the relocations at startup along
with the RELA relocations. RELA relocations still need to be applied
because the linker will emit RELA relative relocations if they are
unrepresentable in the RELR format (i.e. address not a multiple of 2).
Enabling CONFIG_RELR reduces the size of a defconfig kernel image
with CONFIG_RANDOMIZE_BASE by 3.5MB/16% uncompressed, or 550KB/5%
compressed (lz4).
Signed-off-by: Peter Collingbourne <pcc@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by
CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same
functionality which today depends on CONFIG_PREEMPT.
Switch the preemption code, scheduler and init task over to use
CONFIG_PREEMPTION.
That's the first step towards RT in that area. The more complex changes are
coming separately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190726212124.117528401@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
Merge more updates from Andrew Morton:
"VM:
- z3fold fixes and enhancements by Henry Burns and Vitaly Wool
- more accurate reclaimed slab caches calculations by Yafang Shao
- fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
Christoph Hellwig
- !CONFIG_MMU fixes by Christoph Hellwig
- new novmcoredd parameter to omit device dumps from vmcore, by
Kairui Song
- new test_meminit module for testing heap and pagealloc
initialization, by Alexander Potapenko
- ioremap improvements for huge mappings, by Anshuman Khandual
- generalize kprobe page fault handling, by Anshuman Khandual
- device-dax hotplug fixes and improvements, by Pavel Tatashin
- enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V
- add pte_devmap() support for arm64, by Robin Murphy
- unify locked_vm accounting with a helper, by Daniel Jordan
- several misc fixes
core/lib:
- new typeof_member() macro including some users, by Alexey Dobriyan
- make BIT() and GENMASK() available in asm, by Masahiro Yamada
- changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
code generation, by Alexey Dobriyan
- rbtree code size optimizations, by Michel Lespinasse
- convert struct pid count to refcount_t, by Joel Fernandes
get_maintainer.pl:
- add --no-moderated switch to skip moderated ML's, by Joe Perches
misc:
- ptrace PTRACE_GET_SYSCALL_INFO interface
- coda updates
- gdb scripts, various"
[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
fs/select.c: use struct_size() in kmalloc()
mm: add account_locked_vm utility function
arm64: mm: implement pte_devmap support
mm: introduce ARCH_HAS_PTE_DEVMAP
mm: clean up is_device_*_page() definitions
mm/mmap: move common defines to mman-common.h
mm: move MAP_SYNC to asm-generic/mman-common.h
device-dax: "Hotremove" persistent memory that is used like normal RAM
mm/hotplug: make remove_memory() interface usable
device-dax: fix memory and resource leak if hotplug fails
include/linux/lz4.h: fix spelling and copy-paste errors in documentation
ipc/mqueue.c: only perform resource calculation if user valid
include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
scripts/gdb: add helpers to find and list devices
scripts/gdb: add lx-genpd-summary command
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
kernel/pid.c: convert struct pid count to refcount_t
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
...
This fixes a couple typos I noticed in the slab Kconfig:
sacrifies -> sacrifices
accellerate -> accelerate
Seeing as no other instances of these typos are found elsewhere in the
kernel and that I originally added one of the two, I can only assume
working on slab must have caused damage to the spelling centers of my
brain.
Link: http://lkml.kernel.org/r/201905292203.CD000546EB@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename the accounting documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
- remove headers_{install,check}_all targets
- remove unreasonable 'depends on !UML' from CONFIG_SAMPLES
- re-implement 'make headers_install' more cleanly
- add new header-test-y syntax to compile-test headers
- compile-test exported headers to ensure they are compilable in
user-space
- compile-test headers under include/ to ensure they are self-contained
- remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags
- add -Werror=unknown-warning-option for Clang
- add 128-bit built-in types support to genksyms
- fix missed rebuild of modules.builtin
- propagate 'No space left on device' error in fixdep to Make
- allow Clang to use its integrated assembler
- improve some coccinelle scripts
- add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
path for $(srctree).
- do not ignore errors when compression utility is missing
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=E2Rz
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- remove headers_{install,check}_all targets
- remove unreasonable 'depends on !UML' from CONFIG_SAMPLES
- re-implement 'make headers_install' more cleanly
- add new header-test-y syntax to compile-test headers
- compile-test exported headers to ensure they are compilable in
user-space
- compile-test headers under include/ to ensure they are self-contained
- remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value
flags
- add -Werror=unknown-warning-option for Clang
- add 128-bit built-in types support to genksyms
- fix missed rebuild of modules.builtin
- propagate 'No space left on device' error in fixdep to Make
- allow Clang to use its integrated assembler
- improve some coccinelle scripts
- add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
path for $(srctree).
- do not ignore errors when compression utility is missing
- misc cleanups
* tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits)
kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix
kbuild: Inform user to pass ARCH= for make mrproper
kbuild: fix compression errors getting ignored
kbuild: add a flag to force absolute path for srctree
kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
kbuild: remove src and obj from the top Makefile
scripts/tags.sh: remove unused environment variables from comments
scripts/tags.sh: drop SUBARCH support for ARM
kbuild: compile-test kernel headers to ensure they are self-contained
kheaders: include only headers into kheaders_data.tar.xz
kheaders: remove meaningless -R option of 'ls'
kbuild: support header-test-pattern-y
kbuild: do not create wrappers for header-test-y
kbuild: compile-test exported headers to ensure they are self-contained
init/Kconfig: add CONFIG_CC_CAN_LINK
kallsyms: exclude kasan local symbols on s390
kbuild: add more hints about SUBDIRS replacement
coccinelle: api/stream_open: treat all wait_.*() calls as blocking
coccinelle: put_device: Add a cast to an expression for an assignment
coccinelle: put_device: Adjust a message construction
...
Print the currently enabled stack and heap initialization modes.
Stack initialization is enabled by a config flag, while heap
initialization is configured at boot time with defaults being set in the
config. It's more convenient for the user to have all information about
these hardening measures in one place at boot, so the user can reason
about the expected behavior of the running system.
The possible options for stack are:
- "all" for CONFIG_INIT_STACK_ALL;
- "byref_all" for CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL;
- "byref" for CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF;
- "__user" for CONFIG_GCC_PLUGIN_STRUCTLEAK_USER;
- "off" otherwise.
Depending on the values of init_on_alloc and init_on_free boottime options
we also report "heap alloc" and "heap free" as "on"/"off".
In the init_on_free mode initializing pages at boot time may take a while,
so print a notice about that as well. This depends on how much memory is
installed, the memory bandwidth, etc. On a relatively modern x86 system,
it takes about 0.75s/GB to wipe all memory:
[ 0.418722] mem auto-init: stack:byref_all, heap alloc:off, heap free:on
[ 0.419765] mem auto-init: clearing system memory may take some time...
[ 12.376605] Memory: 16408564K/16776672K available (14339K kernel code, 1397K rwdata, 3756K rodata, 1636K init, 11460K bss, 368108K reserved, 0K cma-reserved)
Link: http://lkml.kernel.org/r/20190617151050.92663-3-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Sandeep Patil <sspatil@android.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Kaiwan N Billimoria <kaiwan@kaiwantech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with other
trees, unfortunately. He has a lot more of these waiting on the wings
that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos, and one
on Spectre vulnerabilities.
- Various improvements to the build system, including automatic markup of
function() references because some people, for reasons I will never
understand, were of the opinion that :c:func:``function()`` is
unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
=D0eO
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
-----BEGIN PGP SIGNATURE-----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=VSYT
-----END PGP SIGNATURE-----
Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"This is the main block updates for 5.3. Nothing earth shattering or
major in here, just fixes, additions, and improvements all over the
map. This contains:
- Series of documentation fixes (Bart)
- Optimization of the blk-mq ctx get/put (Bart)
- null_blk removal race condition fix (Bob)
- req/bio_op() cleanups (Chaitanya)
- Series cleaning up the segment accounting, and request/bio mapping
(Christoph)
- Series cleaning up the page getting/putting for bios (Christoph)
- block cgroup cleanups and moving it to where it is used (Christoph)
- block cgroup fixes (Tejun)
- Series of fixes and improvements to bcache, most notably a write
deadlock fix (Coly)
- blk-iolatency STS_AGAIN and accounting fixes (Dennis)
- Series of improvements and fixes to BFQ (Douglas, Paolo)
- debugfs_create() return value check removal for drbd (Greg)
- Use struct_size(), where appropriate (Gustavo)
- Two lighnvm fixes (Heiner, Geert)
- MD fixes, including a read balance and corruption fix (Guoqing,
Marcos, Xiao, Yufen)
- block opal shadow mbr additions (Jonas, Revanth)
- sbitmap compare-and-exhange improvemnts (Pavel)
- Fix for potential bio->bi_size overflow (Ming)
- NVMe pull requests:
- improved PCIe suspent support (Keith Busch)
- error injection support for the admin queue (Akinobu Mita)
- Fibre Channel discovery improvements (James Smart)
- tracing improvements including nvmetc tracing support (Minwoo Im)
- misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya
Kulkarni)"
- Various little fixes and improvements to drivers and core"
* tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits)
blk-iolatency: fix STS_AGAIN handling
block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES
blk-mq: simplify blk_mq_make_request()
blk-mq: remove blk_mq_put_ctx()
sbitmap: Replace cmpxchg with xchg
block: fix .bi_size overflow
block: sed-opal: check size of shadow mbr
block: sed-opal: ioctl for writing to shadow mbr
block: sed-opal: add ioctl for done-mark of shadow mbr
block: never take page references for ITER_BVEC
direct-io: use bio_release_pages in dio_bio_complete
block_dev: use bio_release_pages in bio_unmap_user
block_dev: use bio_release_pages in blkdev_bio_end_io
iomap: use bio_release_pages in iomap_dio_bio_end_io
block: use bio_release_pages in bio_map_user_iov
block: use bio_release_pages in bio_unmap_user
block: optionally mark pages dirty in bio_release_pages
block: move the BIO_NO_PAGE_REF check into bio_release_pages
block: skd_main.c: Remove call to memset after dma_alloc_coherent
block: mtip32xx: Remove call to memset after dma_alloc_coherent
...
The headers in include/ are globally used in the kernel source tree
to provide common APIs. They are included from external modules, too.
It will be useful to make as many headers self-contained as possible
so that we do not have to rely on a specific include order.
There are more than 4000 headers in include/. In my rough analysis,
70% of them are already self-contained. With efforts, most of them
can be self-contained.
For now, we must exclude more than 1000 headers just because they
cannot be compiled as standalone units. I added them to header-test-.
The blacklist was mostly generated by a script, so the reason of the
breakage should be checked later.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Pull cgroup updates from Tejun Heo:
"Documentation updates and the addition of cgroup_parse_float() which
will be used by new controllers including blk-iocost"
* 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: convert docs to ReST and rename to *.rst
cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS
cgroup: add cgroup_parse_float()
Pull scheduler updates from Ingo Molnar:
- Remove the unused per rq load array and all its infrastructure, by
Dietmar Eggemann.
- Add utilization clamping support by Patrick Bellasi. This is a
refinement of the energy aware scheduling framework with support for
boosting of interactive and capping of background workloads: to make
sure critical GUI threads get maximum frequency ASAP, and to make
sure background processing doesn't unnecessarily move to cpufreq
governor to higher frequencies and less energy efficient CPU modes.
- Add the bare minimum of tracepoints required for LISA EAS regression
testing, by Qais Yousef - which allows automated testing of various
power management features, including energy aware scheduling.
- Restructure the former tsk_nr_cpus_allowed() facility that the -rt
kernel used to modify the scheduler's CPU affinity logic such as
migrate_disable() - introduce the task->cpus_ptr value instead of
taking the address of &task->cpus_allowed directly - by Sebastian
Andrzej Siewior.
- Misc optimizations, fixes, cleanups and small enhancements - see the
Git log for details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched/uclamp: Add uclamp support to energy_compute()
sched/uclamp: Add uclamp_util_with()
sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks
sched/uclamp: Set default clamps for RT tasks
sched/uclamp: Reset uclamp values on RESET_ON_FORK
sched/uclamp: Extend sched_setattr() to support utilization clamping
sched/core: Allow sched_setattr() to use the current policy
sched/uclamp: Add system default clamps
sched/uclamp: Enforce last task's UCLAMP_MAX
sched/uclamp: Add bucket local max tracking
sched/uclamp: Add CPU's clamp buckets refcounting
sched/fair: Rename weighted_cpuload() to cpu_runnable_load()
sched/debug: Export the newly added tracepoints
sched/debug: Add sched_overutilized tracepoint
sched/debug: Add new tracepoint to track PELT at se level
sched/debug: Add new tracepoints to track PELT at rq level
sched/debug: Add a new sched_trace_*() helper functions
sched/autogroup: Make autogroup_path() always available
sched/wait: Deduplicate code with do-while
sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle are:
- rwsem scalability improvements, phase #2, by Waiman Long, which are
rather impressive:
"On a 2-socket 40-core 80-thread Skylake system with 40 reader
and writer locking threads, the min/mean/max locking operations
done in a 5-second testing window before the patchset were:
40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810
40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255
After the patchset, they became:
40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741
40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098"
There's a lot of changes to the locking implementation that makes
it similar to qrwlock, including owner handoff for more fair
locking.
Another microbenchmark shows how across the spectrum the
improvements are:
"With a locking microbenchmark running on 5.1 based kernel, the
total locking rates (in kops/s) on a 2-socket Skylake system
with equal numbers of readers and writers (mixed) before and
after this patchset were:
# of Threads Before Patch After Patch
------------ ------------ -----------
2 2,618 4,193
4 1,202 3,726
8 802 3,622
16 729 3,359
32 319 2,826
64 102 2,744"
The changes are extensive and the patch-set has been through
several iterations addressing various locking workloads. There
might be more regressions, but unless they are pathological I
believe we want to use this new implementation as the baseline
going forward.
- jump-label optimizations by Daniel Bristot de Oliveira: the primary
motivation was to remove IPI disturbance of isolated RT-workload
CPUs, which resulted in the implementation of batched jump-label
updates. Beyond the improvement of the real-time characteristics
kernel, in one test this patchset improved static key update
overhead from 57 msecs to just 1.4 msecs - which is a nice speedup
as well.
- atomic64_t cross-arch type cleanups by Mark Rutland: over the last
~10 years of atomic64_t existence the various types used by the
APIs only had to be self-consistent within each architecture -
which means they became wildly inconsistent across architectures.
Mark puts and end to this by reworking all the atomic64
implementations to use 's64' as the base type for atomic64_t, and
to ensure that this type is consistently used for parameters and
return values in the API, avoiding further problems in this area.
- A large set of small improvements to lockdep by Yuyang Du: type
cleanups, output cleanups, function return type and othr cleanups
all around the place.
- A set of percpu ops cleanups and fixes by Peter Zijlstra.
- Misc other changes - please see the Git log for more details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
locking/lockdep: increase size of counters for lockdep statistics
locking/atomics: Use sed(1) instead of non-standard head(1) option
locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING
x86/jump_label: Make tp_vec_nr static
x86/percpu: Optimize raw_cpu_xchg()
x86/percpu, sched/fair: Avoid local_clock()
x86/percpu, x86/irq: Relax {set,get}_irq_regs()
x86/percpu: Relax smp_processor_id()
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
locking/rwsem: Guard against making count negative
locking/rwsem: Adaptive disabling of reader optimistic spinning
locking/rwsem: Enable time-based spinning on reader-owned rwsem
locking/rwsem: Make rwsem->owner an atomic_long_t
locking/rwsem: Enable readers spinning on writer
locking/rwsem: Clarify usage of owner's nonspinaable bit
locking/rwsem: Wake up almost all readers in wait queue
locking/rwsem: More optimal RT task handling of null owner
locking/rwsem: Always release wait_lock before waking up tasks
locking/rwsem: Implement lock handoff to prevent lock starvation
locking/rwsem: Make rwsem_spin_on_owner() return owner state
...
Multiple people have suggested compile-testing UAPI headers to ensure
they can be really included from user-space. "make headers_check" is
obviously not enough to catch bugs, and we often leak unresolved
references to user-space.
Use the new header-test-y syntax to implement it. Please note exported
headers are compile-tested with a completely different set of compiler
flags. The header search path is set to $(objtree)/usr/include since
exported headers should not include unexported ones.
We use -std=gnu89 for the kernel space since the kernel code highly
depends on GNU extensions. On the other hand, UAPI headers should be
written in more standardized C, so they are compiled with -std=c90.
This will emit errors if C++ style comments, the keyword 'inline', etc.
are used. Please use C style comments (/* ... */), '__inline__', etc.
in UAPI headers.
There is additional compiler requirement to enable this test because
many of UAPI headers include <stdlib.h>, <sys/ioctl.h>, <sys/time.h>,
etc. directly or indirectly. You cannot use kernel.org pre-built
toolchains [1] since they lack <stdlib.h>.
I reused CONFIG_CC_CAN_LINK to check the system header availability.
The intention is slightly different, but a compiler that can link
userspace programs provide system headers.
For now, a lot of headers need to be excluded because they cannot
be compiled standalone, but this is a good start point.
[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/index.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Jianping Liu