Commit Graph

236 Commits

Author SHA1 Message Date
Jianping Liu c62d6b571d ock: sync codes to ock 5.4.119-20.0009.21
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:27:38 +08:00
Jianping Liu be16237b31 tkernel: add base tlinux kernel interfaces
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:09:33 +08:00
Linus Torvalds 104c0d6bc4 This pull request contains the following changes for UBI, UBIFS and JFFS2:
UBI:
 - Be less stupid when placing a fastmap anchor
 - Try harder to get an empty PEB in case of contention
 - Make ubiblock to warn if image is not a multiple of 512
 
 UBIFS:
 - Various fixes in error paths
 
 JFFS2:
 - Various fixes in error paths
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl2FzukWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wZb+EADL6lWqlqIpj+Z6Yc7s3kFkQ4ZM
 X1bvfp38WAbVYJ9/X3AKw0PqGXZ9OSM6iLq00s9qIx0WwQtLUT43Q8aKOXKqcy3f
 i8ZTLssRJS6KgcPqSnL0fdD00XZc6cGm+3+6U31KLmW1fWG3mRAt6Vgg1tiEPiUY
 dcsRtePna9RWtRKZZssYgqLGqChU26o1SPIsj5rDc2YB3s6h2dPe+S8z2Qf4K2TD
 UmsCVtVerPHL7b9hS9uq6RxVWGxxgBV83rPc4kag3rdu8oMlMgKWKKvwaoqYiU3L
 KAausS63ZnNltKyuC/hxm9x6RnAXr7t8efXzgdx7JcePYTSApoTJhpsKU/KiTdmg
 dkAsx46An+LXctUBQy4BFoWdChMIKQvW5UkINp/4hbXqgEroiiwiIUbzr6vU6ViM
 Z+gLW0r6V/WiN0L9gj5goO/2lulp6e05s+3o214N54Rn/X9bzgWE04b0beLI7LZ/
 lED+cFSXs+PjfAQaX+UIf6fuzkudH/f+Y5sGsuwDzN6gwaJcSdgWi+WsMXbX50FU
 B4vYTQimTPg2RLEvPvu8/squ7paC0lDOjxwwhmX/s+aBNppSyTU1DelAkeEy6JOT
 BUfIJMQ+FRnDm9PuByS0xlqgNRk+p1q/zMFCP5CIh8yAuJuG4UytnnlojJxgg/bs
 19EsCUduqgKxJMf6cQ==
 =ptT1
 -----END PGP SIGNATURE-----

Merge tag 'upstream-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull UBI, UBIFS and JFFS2 updates from Richard Weinberger:
 "UBI:
   - Be less stupid when placing a fastmap anchor
   - Try harder to get an empty PEB in case of contention
   - Make ubiblock to warn if image is not a multiple of 512

  UBIFS:
   - Various fixes in error paths

  JFFS2:
   - Various fixes in error paths"

* tag 'upstream-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  jffs2: Fix memory leak in jffs2_scan_eraseblock() error path
  jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_page
  jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()
  ubi: block: Warn if volume size is not multiple of 512
  ubifs: Fix memory leak bug in alloc_ubifs_info() error path
  ubifs: Fix memory leak in __ubifs_node_verify_hmac error path
  ubifs: Fix memory leak in read_znode() error path
  ubi: ubi_wl_get_peb: Increase the number of attempts while getting PEB
  ubi: Don't do anchor move within fastmap area
  ubifs: Remove redundant assignment to pointer fname
2019-09-21 11:10:16 -07:00
Linus Torvalds 734d1ed83e fscrypt update for 5.4
This is a large update to fs/crypto/ which includes:
 
 - Add ioctls that add/remove encryption keys to/from a filesystem-level
   keyring.  These fix user-reported issues where e.g. an encrypted home
   directory can break NetworkManager, sshd, Docker, etc. because they
   don't get access to the needed keyring.  These ioctls also provide a
   way to lock encrypted directories that doesn't use the vm.drop_caches
   sysctl, so is faster, more reliable, and doesn't always need root.
 
 - Add a new encryption policy version ("v2") which switches to a more
   standard, secure, and flexible key derivation function, and starts
   verifying that the correct key was supplied before using it.  The key
   derivation improvement is needed for its own sake as well as for
   ongoing feature work for which the current way is too inflexible.
 
 Work is in progress to update both Android and the 'fscrypt' userspace
 tool to use both these features.  (Working patches are available and
 just need to be reviewed+merged.)  Chrome OS will likely use them too.
 
 This has also been tested on ext4, f2fs, and ubifs with xfstests -- both
 the existing encryption tests, and the new tests for this.  This has
 also been in linux-next since Aug 16 with no reported issues.  I'm also
 using an fscrypt v2-encrypted home directory on my personal desktop.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXX8L/BQcZWJpZ2dlcnNA
 Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3DqAQDER8ji5uMWbh00h4+eywfIQdcrUWI0
 t2iEdqfNOoGTWAEAhE2u0SebIVwjluQ3N3HU9b/U6e5R0ZkZU9IQdwkZhQ0=
 =J5WG
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt

Pull fscrypt updates from Eric Biggers:
 "This is a large update to fs/crypto/ which includes:

   - Add ioctls that add/remove encryption keys to/from a
     filesystem-level keyring.

     These fix user-reported issues where e.g. an encrypted home
     directory can break NetworkManager, sshd, Docker, etc. because they
     don't get access to the needed keyring. These ioctls also provide a
     way to lock encrypted directories that doesn't use the
     vm.drop_caches sysctl, so is faster, more reliable, and doesn't
     always need root.

   - Add a new encryption policy version ("v2") which switches to a more
     standard, secure, and flexible key derivation function, and starts
     verifying that the correct key was supplied before using it.

     The key derivation improvement is needed for its own sake as well
     as for ongoing feature work for which the current way is too
     inflexible.

  Work is in progress to update both Android and the 'fscrypt' userspace
  tool to use both these features. (Working patches are available and
  just need to be reviewed+merged.) Chrome OS will likely use them too.

  This has also been tested on ext4, f2fs, and ubifs with xfstests --
  both the existing encryption tests, and the new tests for this. This
  has also been in linux-next since Aug 16 with no reported issues. I'm
  also using an fscrypt v2-encrypted home directory on my personal
  desktop"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (27 commits)
  ext4 crypto: fix to check feature status before get policy
  fscrypt: document the new ioctls and policy version
  ubifs: wire up new fscrypt ioctls
  f2fs: wire up new fscrypt ioctls
  ext4: wire up new fscrypt ioctls
  fscrypt: require that key be added when setting a v2 encryption policy
  fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl
  fscrypt: allow unprivileged users to add/remove keys for v2 policies
  fscrypt: v2 encryption policy support
  fscrypt: add an HKDF-SHA512 implementation
  fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl
  fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
  fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
  fscrypt: rename keyinfo.c to keysetup.c
  fscrypt: move v1 policy key setup to keysetup_v1.c
  fscrypt: refactor key setup code in preparation for v2 policies
  fscrypt: rename fscrypt_master_key to fscrypt_direct_key
  fscrypt: add ->ci_inode to fscrypt_info
  fscrypt: use FSCRYPT_* definitions, not FS_*
  fscrypt: use FSCRYPT_ prefix for uapi constants
  ...
2019-09-18 16:08:52 -07:00
Wenwen Wang 9163e0184b ubifs: Fix memory leak bug in alloc_ubifs_info() error path
In ubifs_mount(), 'c' is allocated through kzalloc() in alloc_ubifs_info().
However, it is not deallocated in the following execution if
ubifs_fill_super() fails, leading to a memory leak bug. To fix this issue,
free 'c' before going to the 'out_deact' label.

Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15 22:12:20 +02:00
Richard Weinberger 377e208f44 ubifs: Correctly initialize c->min_log_bytes
Currently on a freshly mounted UBIFS, c->min_log_bytes is 0.
This can lead to a log overrun and make commits fail.

Recent kernels will report the following assert:
UBIFS assert failed: c->lhead_lnum != c->ltail_lnum, in fs/ubifs/log.c:412

c->min_log_bytes can have two states, 0 and c->leb_size.
It controls how much bytes of the log area are reserved for non-bud
nodes such as commit nodes.

After a commit it has to be set to c->leb_size such that we have always
enough space for a commit. While a commit runs it can be 0 to make the
remaining bytes of the log available to writers.

Having it set to 0 right after mount is wrong since no space for commits
is reserved.

Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-08-22 17:24:59 +02:00
Eric Biggers 62de25927a ubifs: wire up new fscrypt ioctls
Wire up the new ioctls for adding and removing fscrypt keys to/from the
filesystem, and the new ioctl for retrieving v2 encryption policies.

The key removal ioctls also required making UBIFS use
fscrypt_drop_inode().

For more details see Documentation/filesystems/fscrypt.rst and the
fscrypt patches that added the implementation of these ioctls.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Linus Torvalds a318423b61 This pull request contains the following changes for UBIFS
- Support for zstd compression
 - Support for offline signed filesystems
 - Various fixes for regressions
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl0reJsWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wTcMD/0XMJTpaPcw2oAvlWld8i223qIe
 5cwrtDD8JU1/3LXaFf0cfFhT8SklH+X0UgEVorfLVSNZwmpym8I8PxKTxZ5thc4V
 tVvVC8PqVel/2jXXzxSKJUNclzI1eCBMhC0dC2Sdl2FnoTTRyKBT9H2eKdZD8wCd
 4SWrTv1f9RAwTerPF1r7LaTXXreAdQYXxpVFAJBiV8+K+7VHiC+PLb3SgcRazayc
 kJnG8pF/IHiqSVBmzbLwX+5RRuRmS7wbTu4OcBNEyq9jy5/w7gmgCW3uQhownuo+
 +4hEE/4d4yJb8cybYVrRLxUslv/EuB8aLhZ/bvi+D6eDNXBU/VANtWSZU63GCseD
 PC4RYAPAGfBWi/o7Rs+xm2Kxr8FIW4q9WHtM7j0fElcwIbR+nckQRrEJ13kFuFs7
 1TWbpd0Y0v/Ip+Xcut19Gaxap1Yk04JK9wvqLmfHxOqdkznJWKpQ3pAlsXtFfTZv
 DODYkTFfbp2z1tXZHN4Fu/aZ2w2/Rx/OKci8XIa3Fe2VgyZccm4G+6zl1HICbmKl
 /3jmcDi7E6OlFnv2ujDVQC3fA2CiqEgBCVx9E+bxzHROvdWXIrbU9RTiqMDKtYcc
 FD8HJI9PXefxy+Ca0gCf5MA31ION0+TFyP+udeU1SIGm8n/SX8u0FEbm9bOs6kWT
 NIZjp0wlQQg4bTq4lg==
 =rllw
 -----END PGP SIGNATURE-----

Merge tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull UBIFS updates from Richard Weinberger:

 - Support for zstd compression

 - Support for offline signed filesystems

 - Various fixes for regressions

* tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Don't leak orphans on memory during commit
  ubifs: Check link count of inodes when killing orphans.
  ubifs: Add support for zstd compression.
  ubifs: support offline signed images
  ubifs: remove unnecessary check in ubifs_log_start_commit
  ubifs: Fix typo of output in get_cs_sqnum
  ubifs: Simplify redundant code
  ubifs: Correctly use tnc_next() in search_dh_cookie()
2019-07-14 17:24:12 -07:00
Linus Torvalds f632a8170a Driver Core and debugfs changes for 5.3-rc1
Here is the "big" driver core and debugfs changes for 5.3-rc1
 
 It's a lot of different patches, all across the tree due to some api
 changes and lots of debugfs cleanups.  Because of this, there is going
 to be some merge issues with your tree at the moment, I'll follow up
 with the expected resolutions to make it easier for you.
 
 Other than the debugfs cleanups, in this set of changes we have:
 	- bus iteration function cleanups (will cause build warnings
 	  with s390 and coresight drivers in your tree)
 	- scripts/get_abi.pl tool to display and parse Documentation/ABI
 	  entries in a simple way
 	- cleanups to Documenatation/ABI/ entries to make them parse
 	  easier due to typos and other minor things
 	- default_attrs use for some ktype users
 	- driver model documentation file conversions to .rst
 	- compressed firmware file loading
 	- deferred probe fixes
 
 All of these have been in linux-next for a while, with a bunch of merge
 issues that Stephen has been patient with me for.  Other than the merge
 issues, functionality is working properly in linux-next :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
 LpRyb3zX29oChFaZkc5a
 =XrEZ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs updates from Greg KH:
 "Here is the "big" driver core and debugfs changes for 5.3-rc1

  It's a lot of different patches, all across the tree due to some api
  changes and lots of debugfs cleanups.

  Other than the debugfs cleanups, in this set of changes we have:

   - bus iteration function cleanups

   - scripts/get_abi.pl tool to display and parse Documentation/ABI
     entries in a simple way

   - cleanups to Documenatation/ABI/ entries to make them parse easier
     due to typos and other minor things

   - default_attrs use for some ktype users

   - driver model documentation file conversions to .rst

   - compressed firmware file loading

   - deferred probe fixes

  All of these have been in linux-next for a while, with a bunch of
  merge issues that Stephen has been patient with me for"

* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
  debugfs: make error message a bit more verbose
  orangefs: fix build warning from debugfs cleanup patch
  ubifs: fix build warning after debugfs cleanup patch
  driver: core: Allow subsystems to continue deferring probe
  drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
  arch_topology: Remove error messages on out-of-memory conditions
  lib: notifier-error-inject: no need to check return value of debugfs_create functions
  swiotlb: no need to check return value of debugfs_create functions
  ceph: no need to check return value of debugfs_create functions
  sunrpc: no need to check return value of debugfs_create functions
  ubifs: no need to check return value of debugfs_create functions
  orangefs: no need to check return value of debugfs_create functions
  nfsd: no need to check return value of debugfs_create functions
  lib: 842: no need to check return value of debugfs_create functions
  debugfs: provide pr_fmt() macro
  debugfs: log errors when something goes wrong
  drivers: s390/cio: Fix compilation warning about const qualifiers
  drivers: Add generic helper to match by of_node
  driver_find_device: Unify the match function with class_find_device()
  bus_find_device: Unify the match callback with class_find_device
  ...
2019-07-12 12:24:03 -07:00
Michele Dionisio eeabb9866e ubifs: Add support for zstd compression.
zstd shows a good compression rate and is faster than lzo,
also on slow ARM cores.

Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Michele Dionisio <michele.dionisio@gmail.com>
[rw: rewrote commit message]
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-08 19:43:53 +02:00
Sascha Hauer 817aa09484 ubifs: support offline signed images
HMACs can only be generated on the system the UBIFS image is running on.
To support offline signed images we add a PKCS#7 signature to the UBIFS
image which can be created by mkfs.ubifs.

Both the master node and the superblock need to be authenticated, during
normal runtime both are protected with HMACs. For offline signature
support however only a single signature is desired. We add a signature
covering the superblock node directly behind it. To protect the master
node a hash of the master node is added to the superblock which is used
when the master node doesn't contain a HMAC.

Transition to a read/write filesystem is also supported. During
transition first the master node is rewritten with a HMAC (implicitly,
it is written anyway as the FS is marked dirty). Afterwards the
superblock is rewritten with a HMAC. Once after the image has been
mounted read/write it is HMAC only, the signature is no longer required
or even present on the filesystem.

In an offline signed image the master node is authenticated by the
superblock. In a transition to r/w we have to make sure that the master
node is rewritten before the superblock node. In this case the master
node gets a HMAC and its authenticity no longer depends on the
superblock node. There are some cases in which the current code first
writes the superblock node though, so with this patch writing of the
superblock node is delayed until the master node is written.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-08 19:43:52 +02:00
Liu Song d5cf9473a3 ubifs: Simplify redundant code
cbuf's size can be simply assigned.

Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-08 19:43:38 +02:00
Greg Kroah-Hartman 702d6a834b ubifs: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612152120.GA17450@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 16:57:17 +02:00
Thomas Gleixner 2b27bdcc20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin st fifth floor boston ma 02110
  1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 246 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:07 +02:00
Linus Torvalds d7a02fa0a8 This pull request contains the following changes for UBI/UBIFS
- fscrypt framework usage updates
 - One huge fix for xattr unlink
 - Cleanup of fscrypt ifdefs
 - Fix for our new UBIFS auth feature
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAlzYkIgWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wTRrD/99iBd4f8F0jF1wmB8/9kDAnz5s
 KaK+VtC0RVRijRijYzo+/2kDXpXEbmPycg6AVl5EfKxXCVFw1K7pQvuBX43qyv4o
 BINRv1av8FEBA9eTjvBgZJUrjB1AuvV37716/OeM2bnvuCsp1escnvTEh6S3VFYw
 oWDBgZJd+DE10CYtZjuLoyDPcYdNrzebbmu3Xbfl2XsPwZFUJIrymMd6NE8Xdk3I
 EQbZ3guEM5Djui+nrko3iKzfoZ4eK7WguO3DOEjUHpwea4ZfnZtnlH345aYOAqRE
 N5qrDCzXOsWs6Zs+clODMQgg+aTN3kGBNV534culcpMAbUp7WXynUQ1DDqtOJNJO
 pGFjhAfGi4E6YgB3UwqxMbXxI4Tg/X2ckc77hWZlC7h/1Y/i89nacT6Ij5rPNOn1
 mby1mFxWHI04uSEICWyocFK4m/J2b17Tmte2Mc5ZOigQqREUB7J8wiT4NWm6GhV1
 nTb5DA8MepC3zopbsL/iAiKPhSkH1h6AkabBw1ADTksacgNUfhjzALkxqa64tIqv
 C43QG3n/HqsNZJ4aLdizLLb8KIt4pWsIaqHOeDGSfr3I1GEBrpfKiR72P/h3fSF9
 9GIFJU5HiV+3zeAC2024muaV7KjcimZ6t/hPFTCFH9pMGNk2Mtn/gZFfmqnjLKbj
 TDxUTrZF9Lujonrbwg==
 =ymCJ
 -----END PGP SIGNATURE-----

Merge tag 'upstream-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull UBI/UBIFS updates from Richard Weinberger:

 - fscrypt framework usage updates

 - One huge fix for xattr unlink

 - Cleanup of fscrypt ifdefs

 - Fix for our new UBIFS auth feature

* tag 'upstream-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: wl: Fix uninitialized variable
  ubifs: Drop unnecessary setting of zbr->znode
  ubifs: Remove ifdefs around CONFIG_UBIFS_ATIME_SUPPORT
  ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTION
  ubifs: Limit number of xattrs per inode
  ubifs: orphan: Handle xattrs like files
  ubifs: journal: Handle xattrs like files
  ubifs: find.c: replace swap function with built-in one
  ubifs: Do not skip hash checking in data nodes
  ubifs: work around high stack usage with clang
  ubifs: remove unused function __ubifs_shash_final
  ubifs: remove unnecessary #ifdef around fscrypt_ioctl_get_policy()
  ubifs: remove unnecessary calls to set up directory key
2019-05-12 18:16:31 -04:00
Linus Torvalds a9fbcd6728 Clean up fscrypt's dcache revalidation support, and other
miscellaneous cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlzSEfQACgkQ8vlZVpUN
 gaNKrQf+O4JCCc8jqhpvUcNr8+DJNhWYpvRo7yDXoWbAyA6eZHV2fTRX5Vw6T8bW
 iQAj9ofkRnakOq6JvnaUyW8eAuRcqellF7HnwFwTxGOpZ1x3UPAV/roKutAhe8sT
 9dA0VxjugBAISbL2AMQKRPYNuzV07D9As6wZRlPuliFVLLnuPG5SseHRhdn3tm1n
 Jwyipu8P6BjomFtfHT25amISaWRx/uGpjTa1fmjwUxIC8EI6V9K6hKNCAUPsk/3g
 m8zEBpBKSmPK66sFPGxddPNGYAyyFluUboQxB7DuSCF7J3cULO8TxRZbsW/5jaio
 ZR8utWezuXnrI80vG/VtCMhqG3398Q==
 =0Bak
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt

Pull fscrypt updates from Ted Ts'o:
 "Clean up fscrypt's dcache revalidation support, and other
  miscellaneous cleanups"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: cache decrypted symlink target in ->i_link
  vfs: use READ_ONCE() to access ->i_link
  fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext
  fscrypt: only set dentry_operations on ciphertext dentries
  fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory
  fscrypt: fix race allowing rename() and link() of ciphertext dentries
  fscrypt: clean up and improve dentry revalidation
  fscrypt: use READ_ONCE() to access ->i_crypt_info
  fscrypt: remove WARN_ON_ONCE() when decryption fails
  fscrypt: drop inode argument from fscrypt_get_ctx()
2019-05-07 21:28:04 -07:00
Sascha Hauer e3d73dead4 ubifs: Remove ifdefs around CONFIG_UBIFS_ATIME_SUPPORT
ifdefs reduce readability and compile coverage. This removes the ifdefs
around CONFIG_UBIFS_ATIME_SUPPORT by replacing them with IS_ENABLED()
where applicable. The fs layer would fall back to generic_update_time()
when .update_time doesn't exist. We do this fallback explicitly now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07 21:58:32 +02:00
Sascha Hauer eea2c05d92 ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTION
ifdefs reduce readablity and compile coverage. This removes the ifdefs
around CONFIG_FS_ENCRYPTION by using IS_ENABLED and relying on static
inline wrappers. A new static inline wrapper for setting sb->s_cop is
introduced to allow filesystems to unconditionally compile in their
s_cop operations.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07 21:58:31 +02:00
Richard Weinberger 9ca2d73264 ubifs: Limit number of xattrs per inode
Since we have to write one deletion inode per xattr
into the journal, limit the max number of xattrs.

In theory UBIFS supported up to 65535 xattrs per inode.
But this never worked correctly, expect no powercuts happened.
Now we support only as many xattrs as we can store in 50% of a
LEB.
Even for tiny flashes this allows dozens of xattrs per inode,
which is for an embedded filesystem still fine.

In case someone has existing inodes with much more xattrs, it is
still possible to delete them.
UBIFS will fall back to an non-atomic deletion mode.

Reported-by: Stefan Agner <stefan@agner.ch>
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-07 21:58:31 +02:00
Al Viro dc43175996 ubifs: switch to ->free_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-01 22:43:25 -04:00
Eric Biggers 2c58d548f5 fscrypt: cache decrypted symlink target in ->i_link
Path lookups that traverse encrypted symlink(s) are very slow because
each encrypted symlink needs to be decrypted each time it's followed.
This also involves dropping out of rcu-walk mode.

Make encrypted symlinks faster by caching the decrypted symlink target
in ->i_link.  The first call to fscrypt_get_symlink() sets it.  Then,
the existing VFS path lookup code uses the non-NULL ->i_link to take the
fast path where ->get_link() isn't called, and lookups in rcu-walk mode
remain in rcu-walk mode.

Also set ->i_link immediately when a new encrypted symlink is created.

To safely free the symlink target after an RCU grace period has elapsed,
introduce a new function fscrypt_free_inode(), and make the relevant
filesystems call it just before actually freeing the inode.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-17 12:43:29 -04:00
Al Viro 0cdc17ebd2 ubifs: fix use-after-free on symlink traversal
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-01 00:31:02 -04:00
Chandan Rajendra 643fa9612b fscrypt: remove filesystem specific build config option
In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23 23:56:43 -05:00
Sascha Hauer d8a22773a1 ubifs: Enable authentication support
With the preparations all being done this patch now enables authentication
support for UBIFS. Authentication is enabled when the newly introduced
auth_key and auth_hash_name mount options are passed. auth_key provides
the key which is used for authentication whereas auth_hash_name provides
the hashing algorithm used for this FS. Passing these options make
authentication mandatory and only UBIFS images that can be authenticated
with the given key are allowed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:49:01 +02:00
Sascha Hauer 1e76592f2c ubifs: Do not update inode size in-place in authenticated mode
In authenticated mode we cannot fixup the inode sizes in-place
during recovery as this would invalidate the hashes and HMACs
we stored for this inode.

Instead, we just write the updated inodes to the journal. We can
only do this after ubifs_rcvry_gc_commit() is done though, so for
authenticated mode call ubifs_recover_size() after
ubifs_rcvry_gc_commit() and not vice versa as normally done.

Calling ubifs_recover_size() after ubifs_rcvry_gc_commit() has the
drawback that after a commit the size fixup information is gone, so
when a powercut happens while recovering from another powercut
we may lose some data written right before the first powercut.
This is why we only do this in authenticated mode and leave the
behaviour for unauthenticated mode untouched.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:57 +02:00
Sascha Hauer 6a98bc4614 ubifs: Add authentication nodes to journal
Nodes that are written to flash can only be authenticated through the
index after the next commit. When a journal replay is necessary the
nodes are not yet referenced by the index and thus can't be
authenticated.

This patch overcomes this situation by creating a hash over all nodes
beginning from the commit start node over the reference node(s) and
the buds themselves. From
time to time we insert authentication nodes. Authentication nodes
contain a HMAC from the current hash state, so that they can be
used to authenticate a journal replay up to the point where the
authentication node is. The hash is continued afterwards
so that theoretically we would only have to check the HMAC of
the last authentication node we find.

Overall we get this picture:

,,,,,,,,
,......,...........................................
,. CS  ,               hash1.----.           hash2.----.
,.  |  ,                    .    |hmac            .    |hmac
,.  v  ,                    .    v                .    v
,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ...
,..|...,...........................................
,  |   ,
,  |   ,,,,,,,,,,,,,,,
.  |            hash3,----.
,  |                 ,    |hmac
,  v                 ,    v
, REF#1 -> bud -> bud,-> auth ...
,,,|,,,,,,,,,,,,,,,,,,
   v
  REF#2 -> ...
   |
   V
  ...

Note how hash3 covers CS, REF#0 and REF#1 so that it is not possible to
exchange or skip any reference nodes. Unlike the picture suggests the
auth nodes themselves are not hashed.

With this it is possible for an offline attacker to cut each journal
head or to drop the last reference node(s), but not to skip any journal
heads or to reorder any operations.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:39 +02:00
Sascha Hauer 5125cfdff1 ubifs: Format changes for authentication support
This patch adds the changes to the on disk format needed for
authentication support. We'll add:

* a HMAC covering super block node
* a HMAC covering the master node
* a hash over the root index node to the master node
* a hash over the LPT to the master node
* a flag to the filesystem flag indicating the filesystem is
  authenticated
* an authentication node necessary to authenticate the nodes written
  to the journal heads while they are written.
* a HMAC of a well known message to the super block node to be able
  to check if the correct key is provided

And finally, not visible in this patch, nevertheless explained here:

* hashes over the referenced child nodes in each branch of a index node

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:29 +02:00
Sascha Hauer fd6150051b ubifs: Store read superblock node
The superblock node is read/modified/written several times throughout
the UBIFS code. Instead of reading it from the device each time just
keep a copy in memory and write back the modified copy when necessary.
This patch helps for authentication support, here we not only have to
read the superblock node, but also have to authenticate it, which
is easier if we do it once during initialization.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:29 +02:00
Richard Weinberger f8ccb14fd6 ubifs: Fix WARN_ON logic in exit path
ubifs_assert() is not WARN_ON(), so we have to invert
the checks.
Randy faced this warning with UBIFS being a module, since
most users use UBIFS as builtin because UBIFS is the rootfs
nobody noticed so far. :-(
Including me.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 54169ddd38 ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13 11:05:02 +02:00
Sascha Hauer d3bdc016c5 ubifs: drop false positive assertion
The following sequence triggers

	ubifs_assert(c, c->lst.taken_empty_lebs > 0);

at the end of ubifs_remount_fs():

mount -t ubifs /dev/ubi0_0 /mnt
echo 1 > /sys/kernel/debug/ubifs/ubi0_0/ro_error
umount /mnt
mount -t ubifs -o ro /dev/ubix_y /mnt
mount -o remount,ro /mnt

The resulting

UBIFS assert failed in ubifs_remount_fs at 1878 (pid 161)

is a false positive. In the case above c->lst.taken_empty_lebs has
never been changed from its initial zero value. This will only happen
when the deferred recovery is done.

Fix this by doing the assertion only when recovery has been done
already.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-09-20 21:37:07 +02:00
Richard Weinberger 37f31b6ca4 ubifs: Check for name being NULL while mounting
The requested device name can be NULL or an empty string.
Check for that and refuse to continue. UBIFS has to do this manually
since we cannot use mount_bdev(), which checks for this condition.

Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-09-20 21:37:07 +02:00
Richard Weinberger 99a24e02cc ubifs: Set default assert action to read-only
Traditionally UBIFS just reported a failed assertion and moved on. The
drawback is that users will notice UBIFS bugs when it is too late, most
of the time when it is no longer about to mount. This makes bug hunting
problematic since valuable information from failing asserts is long gone
when UBIFS is dead. The other extreme, panic'ing on a failing assert is
also not worthwhile, we want users and developers give a chance to
collect as much debugging information as possible if UBIFS hits an
assert. Therefore go for the third option, switch to read-only mode when
an assert fails. That way UBIFS will not write possible bad data to the
MTD and gives users the chance to collect debugging information.

Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:22 +02:00
Richard Weinberger c38c5a7f2e ubifs: Allow setting assert action as mount parameter
Expose our three options to userspace.

Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:21 +02:00
Richard Weinberger 6eb61d587f ubifs: Pass struct ubifs_info to ubifs_assert()
This allows us to have more context in ubifs_assert()
and take different actions depending on the configuration.

Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:21 +02:00
Richard Weinberger 54169ddd38 ubifs: Turn two ubifs_assert() into a WARN_ON()
We are going to pass struct ubifs_info to ubifs_assert()
but while unloading the UBIFS module we don't have the info
struct anymore.
Therefore replace the asserts by a regular WARN_ON().

Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:21 +02:00
Stefan Agner 7e5471ce6d ubifs: introduce Kconfig symbol for xattr support
Allow to disable extended attribute support.

This aids in reliability testing, especially since some xattr
related bugs have surfaced.

Also an embedded system might not need it, so this allows for a
slightly smaller kernel (about 4KiB).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:14 +02:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Richard Weinberger aac17948a7 ubifs: Check ubifs_wbuf_sync() return code
If ubifs_wbuf_sync() fails we must not write a master node with the
dirty marker cleared.
Otherwise it is possible that in case of an IO error while syncing we
mark the filesystem as clean and UBIFS refuses to recover upon next
mount.

Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-04 23:41:44 +02:00
Eric Biggers 3d204e24d4 fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info()
fscrypt_put_encryption_info() is only called when evicting an inode, so
the 'struct fscrypt_info *ci' parameter is always NULL, and there cannot
be races with other threads.  This was cruft left over from the broken
key revocation code.  Remove the unused parameter and the cmpxchg().

Also remove the #ifdefs around the fscrypt_put_encryption_info() calls,
since fscrypt_notsupp.h defines a no-op stub for it.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-11 23:30:13 -05:00
Linus Torvalds 1751e8a6cb Rename superblock flags (MS_xyz -> SB_xyz)
This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Eric Biggers ffcc41829a fscrypt: remove unneeded empty fscrypt_operations structs
In the case where a filesystem has been configured without encryption
support, there is no longer any need to initialize ->s_cop at all, since
none of the methods are ever called.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-18 19:52:37 -04:00
Eric Biggers f7293e48bb fscrypt: remove ->is_encrypted()
Now that all callers of fscrypt_operations.is_encrypted() have been
switched to IS_ENCRYPTED(), remove ->is_encrypted().

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-18 19:52:37 -04:00
David Howells bc98a42c1f VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-17 08:45:34 +01:00
karam.lee 07d41c3cf2 ubifs: Fix oops when remounting with no_bulk_read.
When remounting with the no_bulk_read option,
there is a problem accessing the "bulk_read buffer(bu.buf)"
which has already been freed.

If the bulk_read option is enabled,
ubifs_tnc_bulk_read uses the pre-allocated bu.buf.

While bu.buf is being used by ubifs_tnc_bulk_read,
remounting with no_bulk_read frees bu.buf.

So I added code to check the use of "bu.buf" to avoid this situation.

------
I tested as follows(kernel v3.18) :

Use the script to repeat "no_bulk_read <-> bulk_read"
	remount.sh
	#!/bin/sh
	while true do;
		mount -o remount,no_bulk_read ${MOUNT_POINT};
		sleep 1;
		mount -o remount,bulk_read ${MOUNT_POINT};
		sleep 1;
	done

Perform read operation
	cat ${MOUNT_POINT}/* > /dev/null

The problem is reproduced immediately.

[  234.256845][kernel.0]Internal error: Oops: 17 [#1] PREEMPT ARM
[  234.258557][kernel.0]CPU: 0 PID: 2752 Comm: cat Tainted: G        W  O   3.18.31+ #51
[  234.259531][kernel.0]task: cbff8580 ti: cbd66000 task.ti: cbd66000
[  234.260306][kernel.0]PC is at validate_data_node+0x10/0x264
[  234.260994][kernel.0]LR is at ubifs_tnc_bulk_read+0x388/0x3ec
[  234.261712][kernel.0]pc : [<c01d98fc>]    lr : [<c01dc300>]    psr: 80000013
[  234.261712][kernel.0]sp : cbd67ba0  ip : 00000001  fp : 00000000
[  234.263337][kernel.0]r10: cd3e0260  r9 : c0df2008  r8 : 00000000
[  234.264087][kernel.0]r7 : cd3e0000  r6 : 00000000  r5 : cd3e0278  r4 : cd3e0000
[  234.264999][kernel.0]r3 : 00000003  r2 : cd3e0280  r1 : 00000000  r0 : cd3e0000
[  234.265910][kernel.0]Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  234.266896][kernel.0]Control: 10c53c7d  Table: 8c40c059  DAC: 00000015
[  234.267711][kernel.0]Process cat (pid: 2752, stack limit = 0xcbd66400)
[  234.268525][kernel.0]Stack: (0xcbd67ba0 to 0xcbd68000)
[  234.269169][kernel.0]7ba0: cd7c3940 c03d8650 0001bfe0 00002ab2 00000000 cbd67c5c cbd67c58 0001bfe0
[  234.270287][kernel.0]7bc0: cd3e0000 00002ab2 0001bfe0 00000014 cbd66000 cd3e0260 00000000 c01d6660
[  234.271403][kernel.0]7be0: 00002ab2 00000000 c82a5800 ffffffff cd3e0298 cd3e0278 00000000 cd3e0000
[  234.272520][kernel.0]7c00: 00000000 00000000 cd3e0260 c01dc300 00002ab2 00000000 60000013 d663affa
[  234.273639][kernel.0]7c20: cd3e01f0 cd3e01f0 60000013 c09397ec 00000000 cd3e0278 00002ab2 00000000
[  234.274755][kernel.0]7c40: cd3e0000 c01dbf48 00000014 00000003 00000160 00000015 00000004 d663affa
[  234.275874][kernel.0]7c60: ccdaa978 cd3e0278 cd3e0000 cf32a5f4 ccdaa820 00000044 cbd66000 cd3e0260
[  234.276992][kernel.0]7c80: 00000003 c01cec84 ccdaa8dc cbd67cc4 cbd67ec0 00000010 ccdaa978 00000000
[  234.278108][kernel.0]7ca0: 0000015e ccdaa8dc 00000000 00000000 cf32a5d0 00000000 0000015f ccdaa8dc
[  234.279228][kernel.0]7cc0: 00000000 c8488300 0009e5a4 0000000e cbd66000 0000015e cf32a5f4 c0113c04
[  234.280346][kernel.0]7ce0: 0000009f 0000003c c00098c4 ffffffff 00001000 00000000 000000ad 00000010
[  234.281463][kernel.0]7d00: 00000038 cd68f580 00000150 c8488360 00000000 cbd67d30 cbd67d70 0000000e
[  234.282579][kernel.0]7d20: 00000010 00000000 c0951874 c0112a9c cf379b60 cf379b84 cf379890 cf3798b4
[  234.283699][kernel.0]7d40: cf379578 cf37959c cf379380 cf3793a4 cf3790b0 cf3790d4 cf378fd8 cf378ffc
[  234.284814][kernel.0]7d60: cf378f48 cf378f6c cf32a5f4 cf32a5d0 00000000 00001000 00000018 00000000
[  234.285932][kernel.0]7d80: 00001000 c0050da4 00000000 00001000 cec04c00 00000000 00001000 c0e11328
[  234.287049][kernel.0]7da0: 00000000 00001000 cbd66000 00000000 00001000 c0012a60 00000000 00001000
[  234.288166][kernel.0]7dc0: cbd67dd4 00000000 00001000 80000013 00000000 00001000 cd68f580 00000000
[  234.289285][kernel.0]7de0: 00001000 c915d600 00000000 00001000 cbd67e48 00000000 00001000 00000018
[  234.290402][kernel.0]7e00: 00000000 00001000 00000000 00000000 00001000 c915d768 c915d768 c0113550
[  234.291522][kernel.0]7e20: cd68f580 cbd67e48 cd68f580 cb6713c0 00010000 000ac5a4 00000000 001fc5a4
[  234.292637][kernel.0]7e40: 00000000 c8488300 cbd67ec0 00eb0000 cd68f580 c0113ee4 00000000 cbd67ec0
[  234.293754][kernel.0]7e60: cd68f580 c8488300 cbd67ec0 00eb0000 cd68f580 00150000 c8488300 00eb0000
[  234.294874][kernel.0]7e80: 00010000 c0112fd0 00000000 cbd67ec0 cd68f580 00150000 00000000 cd68f580
[  234.295991][kernel.0]7ea0: cbd67ef0 c011308c 00000000 00000002 cd768850 00010000 00000000 c01133fc
[  234.297110][kernel.0]7ec0: 00150000 00000000 cbd67f50 00000000 00000000 cb6713c0 01000000 cbd67f48
[  234.298226][kernel.0]7ee0: cbd67f50 c8488300 00000000 c0113204 00010000 01000000 00000000 cb6713c0
[  234.299342][kernel.0]7f00: 00150000 00000000 cbd67f50 00000000 00000000 00000000 00000000 00000000
[  234.300462][kernel.0]7f20: cbd67f50 01000000 01000000 cb6713c0 c8488300 c00ebba8 01000000 00000000
[  234.301577][kernel.0]7f40: c8488300 cb6713c0 00000000 00000000 00000000 00000000 ccdaa820 00000000
[  234.302697][kernel.0]7f60: 00000000 01000000 00000003 00000001 cbd66000 00000000 00000001 c00ec678
[  234.303813][kernel.0]7f80: 00000000 00000200 00000000 01000000 01000000 00000000 00000000 000000ef
[  234.304933][kernel.0]7fa0: c000e904 c000e780 01000000 00000000 00000001 00000003 00000000 01000000
[  234.306049][kernel.0]7fc0: 01000000 00000000 00000000 000000ef 00000001 00000003 01000000 00000001
[  234.307165][kernel.0]7fe0: 00000000 beafb78c 0000ad08 00128d1c 60000010 00000001 00000000 00000000
[  234.308292][kernel.0][<c01d98fc>] (validate_data_node) from [<c01dc300>] (ubifs_tnc_bulk_read+0x388/0x3ec)
[  234.309493][kernel.0][<c01dc300>] (ubifs_tnc_bulk_read) from [<c01cec84>] (ubifs_readpage+0x1dc/0x46c)
[  234.310656][kernel.0][<c01cec84>] (ubifs_readpage) from [<c0113c04>] (__generic_file_splice_read+0x29c/0x4cc)
[  234.311890][kernel.0][<c0113c04>] (__generic_file_splice_read) from [<c0113ee4>] (generic_file_splice_read+0xb0/0xf4)
[  234.313214][kernel.0][<c0113ee4>] (generic_file_splice_read) from [<c0112fd0>] (do_splice_to+0x68/0x7c)
[  234.314386][kernel.0][<c0112fd0>] (do_splice_to) from [<c011308c>] (splice_direct_to_actor+0xa8/0x190)
[  234.315544][kernel.0][<c011308c>] (splice_direct_to_actor) from [<c0113204>] (do_splice_direct+0x90/0xb8)
[  234.316741][kernel.0][<c0113204>] (do_splice_direct) from [<c00ebba8>] (do_sendfile+0x17c/0x2b8)
[  234.317838][kernel.0][<c00ebba8>] (do_sendfile) from [<c00ec678>] (SyS_sendfile64+0xc4/0xcc)
[  234.318890][kernel.0][<c00ec678>] (SyS_sendfile64) from [<c000e780>] (ret_fast_syscall+0x0/0x38)
[  234.319983][kernel.0]Code: e92d47f0 e24dd050 e59f9228 e1a04000 (e5d18014)

Signed-off-by: karam.lee <karam.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:50:40 +02:00
Rabin Vincent 319c104274 ubifs: allow userspace to map mounts to volumes
There currently appears to be no way for userspace to find out the
underlying volume number for a mounted ubifs file system, since ubifs
uses anonymous block devices.  The volume name is present in
/proc/mounts but UBI volumes can be renamed after the volume has been
mounted.

To remedy this, show the UBI number and UBI volume number as part of the
options visible under /proc/mounts.

Also, accept and ignore the ubi= vol= options if they are used mounting
(patch from Richard Weinberger).

 # mount -t ubifs ubi:baz x
 # mount
 ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2)
 # ubirename /dev/ubi0 baz bazz
 # mount
 ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2)
 # ubinfo -d 0 -n 2
 Volume ID:   2 (on ubi0)
 Type:        dynamic
 Alignment:   1
 Size:        67 LEBs (1063424 bytes, 1.0 MiB)
 State:       OK
 Name:        bazz
 Character device major/minor: 254:3

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:07 +02:00
Richard Weinberger e996bfd428 ubifs: Unexport ubifs_inode_slab
This SLAB is only being used in super.c, there is no need to expose
it into the global namespace.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:48:43 +02:00
Jan Kara 99edd4580b ubifs: Convert to separately allocated bdi
Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.

CC: Richard Weinberger <richard@nod.at>
CC: Artem Bityutskiy <dedekind1@gmail.com>
CC: Adrian Hunter <adrian.hunter@intel.com>
CC: linux-mtd@lists.infradead.org
Acked-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:09:55 -06:00
Eric Biggers 6f69f0ed61 fscrypt: constify struct fscrypt_operations
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Richard Weinberger <richard@nod.at>
2017-02-08 10:59:57 -05:00
Richard Weinberger ca7f85be8d ubifs: Add support for encrypted symlinks
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger 7799953b34 ubifs: Implement encrypt/decrypt for all IO
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00