We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ccree had a mechanism for IV generation which was not compatible
with the Linux seqiv or echainiv iv generator and was never used
in any of the upstream versions so drop all the code implementing it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add check to verify the stated device tree HW configuration
matches the HW.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ccree irq may be shared with other devices, in order to prevent ccree isr
handling while device maybe suspended we added a check to verify that the
device is not suspended.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of driver probe and pm resume we need to check that the cryptocell
hardware reset cycle is completed. during the reset cycle that Cryptocell
provide read only access to the APB interface which allows to verify
through the CC registers that the reset is completed. Until reset
completion we assume that any write/crypto operation is blocked.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We build an explicit little endian value from the IDR register
values. Use a proper le32 type to mark the var as such to
satisfy Sparse.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: dcf6285d18 ("crypto: ccree - add CID and PID support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warning:
drivers/crypto/ccree/cc_driver.c:37:6: warning:
symbol 'cc_sec_disable' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The new HW uses a new standard product and component ID registers
replacing the old ad-hoc version and signature gister schemes.
Update the driver to support the new HW ID registers.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the logic needed to track and report CPP operation rejection.
The new logic will be used by the CPP feature introduced later.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Security Disabled mode under which only
pure cryptographic functionality is enabled and protected keys
services are unavailable.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto update from Herbert Xu:
"API:
- Add helper for simple skcipher modes.
- Add helper to register multiple templates.
- Set CRYPTO_TFM_NEED_KEY when setkey fails.
- Require neither or both of export/import in shash.
- AEAD decryption test vectors are now generated from encryption
ones.
- New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random
fuzzing.
Algorithms:
- Conversions to skcipher and helper for many templates.
- Add more test vectors for nhpoly1305 and adiantum.
Drivers:
- Add crypto4xx prng support.
- Add xcbc/cmac/ecb support in caam.
- Add AES support for Exynos5433 in s5p.
- Remove sha384/sha512 from artpec7 as hardware cannot do partial
hash"
[ There is a merge of the Freescale SoC tree in order to pull in changes
required by patches to the caam/qi2 driver. ]
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits)
crypto: s5p - add AES support for Exynos5433
dt-bindings: crypto: document Exynos5433 SlimSSS
crypto: crypto4xx - add missing of_node_put after of_device_is_available
crypto: cavium/zip - fix collision with generic cra_driver_name
crypto: af_alg - use struct_size() in sock_kfree_s()
crypto: caam - remove redundant likely/unlikely annotation
crypto: s5p - update iv after AES-CBC op end
crypto: x86/poly1305 - Clear key material from stack in SSE2 variant
crypto: caam - generate hash keys in-place
crypto: caam - fix DMA mapping xcbc key twice
crypto: caam - fix hash context DMA unmap size
hwrng: bcm2835 - fix probe as platform device
crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number
crypto: stm32 - drop pointless static qualifier in stm32_hash_remove()
crypto: chelsio - Fixed Traffic Stall
crypto: marvell - Remove set but not used variable 'ivsize'
crypto: ccp - Update driver messages to remove some confusion
crypto: adiantum - add 1536 and 4096-byte test vectors
crypto: nhpoly1305 - add a test vector with len % 16 != 0
crypto: arm/aes-ce - update IV after partial final CTR block
...
We were enabling autosuspend, which is using data set by the
hash module, prior to the hash module being inited, casuing
a crash on resume as part of the startup sequence if the race
was lost.
This was never a real problem because the PM infra was using low
res timers so we were always winning the race, until commit 8234f6734c
("PM-runtime: Switch autosuspend over to using hrtimers") changed that :-)
Fix this by seperating the PM setup and enablement and doing the
latter only at the end of the init sequence.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@kernel.org # v4.20
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Yael Chemla <yael.chemla@foss.arm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ccree driver was logging an error if it got an interrupt but
HW indicated nothing to do as might happen if sharing an irq line.
Remove the error as this is normal and we already have a debug
print for the IRR register value.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Arm TrustZone CryptoCell 703.
The 703 is a variant of the CryptoCell 713 that supports only
algorithms certified by the Chinesse Office of the State Commercial
Cryptography Administration (OSCCA).
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust hash length such that it will not be fixed and general for all algs.
Instead make it suitable for certain context information.
This is preparation for SM3 support.
Signed-off-by: Yael Chemla <yael.chemla@foss.arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Arm TrustZone CryptoCell 713.
Note that this patch just enables using a 713 in backwards compatible mode
to 712. Newer 713 specific features will follow.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A debug print about register status post interrupt can happen
quite often. Rate limit it to avoid cluttering the log.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cache parameter register configuration was being too verbose.
Use dev_dbg() to only provide the information if needed.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use managed clock handling, differentiate between no clock (possibly OK)
and clock init failure (never OK) and correctly handle clock detection
being deferred.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The product signature and HW revision register have different offset on the
older HW revisions.
This fixes the problem of the driver failing sanity check on silicon
despite working on the FPGA emulation systems.
Fixes: 27b3b22dd9 ("crypto: ccree - add support for older HW revs")
Cc: stable@vger.kernel.org
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix incorrect use of %pad as a printk format string for none dma_addr_t
variable.
Discovered via smatch.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the legacy CryptoCell 630 and 710 revs.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add FIPS mode support to CryptoCell driver
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce basic low level Arm TrustZone CryptoCell HW support.
This first patch doesn't actually register any Crypto API
transformations, these will follow up in the next patch.
This first revision supports the CC 712 REE component.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephen Boyd