Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmI6MhgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXiBkB/9FEaebcytvBMNVnz/fprfQWfYxdrUB
wmDB9dnJVPX6UcWg6DuDv7KqatimDp7JrnKrNsrqlgF6Wafn/wI3Cdf8ZUi8CgtZ
Walq8m2QM9j8WCm4EtgmluzGkHjAn6llmjE7XoLmo/A8MYp0FZhJzghKfCEu54EB
9DhgqQX+zzy7n32CxoAWrGrHegnGeqMpj3rhQ4qVuNn+bOzZ/wTyJQPmXTu4hSW1
0PrXRnfzqnODkB6QDUantABZM5bh1VsqwIlENp+xAFQVsQpsc35lW7AUg7JXczVn
ES0+UHG7wVWPJCtIfD4FgIFT1xekPKxRYX9U66LMRbWGYhXfohQX+wFt
=u62V
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
"Minor patches from various people"
* tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Output host build info as normal Windows version number
hv_balloon: rate-limit "Unhandled message" warning
drivers: hv: log when enabling crash_kexec_post_notifiers
hv_utils: Add comment about max VMbus packet size in VSS driver
Drivers: hv: Compare cpumasks and not their weights in init_vp_index()
Drivers: hv: Rename 'alloced' to 'allocated'
Drivers: hv: vmbus: Use struct_size() helper in kmalloc()
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical sections
that last too long for very large guests backed by 4 KiB SPTEs.
- Zap invalid and defunct roots asynchronously via concurrency-managed
work queue.
- Allowing yielding when zapping TDP MMU roots in response to the root's
last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the paging
structure now holds RCU as a proxy for all vCPUs running in the guest,
i.e. to prolongs the grace period on their behalf. It then kicks the
the vCPUs out of guest mode before doing rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that
need memcg accounting
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmI4fdwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq8gf/WoeVHtw2QlL5Mmz6McvRRmPAYPLV
wLUIFNrRqRvd8Tw4kivzZoh/xTpwmnojv0YdK5SjKAiMjgv094YI1LrNp1JSPvmL
pitocMkA10RSJNWHeEMg9cMSKH0rKiqeYl6S1e2XsdB+UZZ2BINOCVtvglmjTAvJ
dFBdKdBkqjAUZbdXAGIvz4JEEER3N/LkFDKGaUGX+0QIQOzGBPIyLTxynxIDG6mt
RViCCFyXdy5NkVp5hZFm96vQ2qAlWL9B9+iKruQN++82+oqWbeTdSqPhdwF7GyFz
BfOv3gobQ2c4ef/aMLO5LswZ9joI1t/4kQbbAn6dNybpOAz/NXfDnbNefg==
=keox
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays with
flexible-array members. This patch has been baking in linux-next for a
whole development cycle.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=xZD2
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
To quote Linus:
"EVERYBODY should have CONFIG_WERROR=y on at least x86-64 and other
serious architectures, unless you have some completely random
experimental (and broken) compiler.
New compiler warnings are not acceptable."
So this should make at least the most obvious and common ones not go
unnoticed.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YjsCpoRK7W4l6tSh@zn.tnic
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.
Link: https://lkml.kernel.org/r/20211206160514.2000-4-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
ARCH_REQ_XCOMP_PERM is supposed to add the requested feature to the
permission bitmap of thread_group_leader()->fpu. But the code overwrites
the bitmap with the requested feature bit only rather than adding it.
Fix the code to add the requested feature bit to the master bitmask.
Fixes: db8268df09 ("x86/arch_prctl: Add controls for dynamic XSTATE components")
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <bonzini@gnu.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220129173647.27981-2-chang.seok.bae@intel.com
... and call node_dev_init() after memory_dev_init() from driver_init(),
so before any of the existing arch/subsys calls. All online nodes should
be known at that point: early during boot, arch code determines node and
zone ranges and sets the relevant nodes online; usually this happens in
setup_arch().
This is in line with memory_dev_init(), which initializes the memory
device subsystem and creates all memory block devices.
Similar to memory_dev_init(), panic() if anything goes wrong, we don't
want to continue with such basic initialization errors.
The important part is that node_dev_init() gets called after
memory_dev_init() and after cpu_dev_init(), but before any of the relevant
archs call register_cpu() to register the new cpu device under the node
device. The latter should be the case for the current users of
topology_init().
Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64)
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARCH_WANT_GENERAL_HUGETLB config has duplicate definitions on platforms
that subscribe it. Instead make it a generic config option which can be
selected on applicable platforms when required.
Link: https://lkml.kernel.org/r/1643718465-4324-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the hwpoison page meets the filter conditions, it should not be
regarded as successful memory_failure() processing for mce handler, but
should return a distinct value, otherwise mce handler regards the error
page has been identified and isolated, which may lead to calling
set_mce_nospec() to change page attribute, etc.
Here memory_failure() return -EOPNOTSUPP to indicate that the error
event is filtered, mce handler should not take any action for this
situation and hwpoison injector should treat as correct.
Link: https://lkml.kernel.org/r/20220223082135.2769649-1-luofei@unicloud.com
Signed-off-by: luofei <luofei@unicloud.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On x86, prior to ("mm: handle uninitialized numa nodes gracecully"), NUMA
nodes could be allocated at three different places.
- numa_register_memblks
- init_cpu_to_node
- init_gi_nodes
All these calls happen at setup_arch, and have the following order:
setup_arch
...
x86_numa_init
numa_init
numa_register_memblks
...
init_cpu_to_node
init_memory_less_node
alloc_node_data
free_area_init_memoryless_node
init_gi_nodes
init_memory_less_node
alloc_node_data
free_area_init_memoryless_node
numa_register_memblks() is only interested in those nodes which have
memory, so it skips over any memoryless node it founds. Later on, when
we have read ACPI's SRAT table, we call init_cpu_to_node() and
init_gi_nodes(), which initialize any memoryless node we might have that
have either CPU or Initiator affinity, meaning we allocate pg_data_t
struct for them and we mark them as ONLINE.
So far so good, but the thing is that after ("mm: handle uninitialized
numa nodes gracefully"), we allocate all possible NUMA nodes in
free_area_init(), meaning we have a picture like the following:
setup_arch
x86_numa_init
numa_init
numa_register_memblks <-- allocate non-memoryless node
x86_init.paging.pagetable_init
...
free_area_init
free_area_init_memoryless <-- allocate memoryless node
init_cpu_to_node
alloc_node_data <-- allocate memoryless node with CPU
free_area_init_memoryless_node
init_gi_nodes
alloc_node_data <-- allocate memoryless node with Initiator
free_area_init_memoryless_node
free_area_init() already allocates all possible NUMA nodes, but
init_cpu_to_node() and init_gi_nodes() are clueless about that, so they
go ahead and allocate a new pg_data_t struct without checking anything,
meaning we end up allocating twice.
It should be mad clear that this only happens in the case where
memoryless NUMA node happens to have a CPU/Initiator affinity.
So get rid of init_memory_less_node() and just set the node online.
Note that setting the node online is needed, otherwise we choke down the
chain when bringup_nonboot_cpus() ends up calling
__try_online_node()->register_one_node()->... and we blow up in
bus_add_device(). As can be seen here:
BUG: kernel NULL pointer dereference, address: 0000000000000060
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4-1-default+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/4
RIP: 0010:bus_add_device+0x5a/0x140
Code: 8b 74 24 20 48 89 df e8 84 96 ff ff 85 c0 89 c5 75 38 48 8b 53 50 48 85 d2 0f 84 bb 00 004
RSP: 0000:ffffc9000022bd10 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888100987400 RCX: ffff8881003e4e19
RDX: ffff8881009a5e00 RSI: ffff888100987400 RDI: ffff888100987400
RBP: 0000000000000000 R08: ffff8881003e4e18 R09: ffff8881003e4c98
R10: 0000000000000000 R11: ffff888100402bc0 R12: ffffffff822ceba0
R13: 0000000000000000 R14: ffff888100987400 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88853fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 000000000200a001 CR4: 00000000001706b0
Call Trace:
device_add+0x4c0/0x910
__register_one_node+0x97/0x2d0
__try_online_node+0x85/0xc0
try_online_node+0x25/0x40
cpu_up+0x4f/0x100
bringup_nonboot_cpus+0x4f/0x60
smp_init+0x26/0x79
kernel_init_freeable+0x130/0x2f1
kernel_init+0x17/0x150
ret_from_fork+0x22/0x30
The reason is simple, by the time bringup_nonboot_cpus() gets called, we
did not register the node_subsys bus yet, so we crash when
bus_add_device() tries to dereference bus()->p.
The following shows the order of the calls:
kernel_init_freeable
smp_init
bringup_nonboot_cpus
...
bus_add_device() <- we did not register node_subsys yet
do_basic_setup
do_initcalls
postcore_initcall(register_node_type);
register_node_type
subsys_system_register
subsys_register
bus_register <- register node_subsys bus
Why setting the node online saves us then? Well, simply because
__try_online_node() backs off when the node is online, meaning we do not
end up calling register_one_node() in the first place.
This is subtle, broken and deserves a deep analysis and thought about
how to put this into shape, but for now let us have this easy fix for
the leaking memory issue.
[osalvador@suse.de: add comments]
Link: https://lkml.kernel.org/r/20220221142649.3457-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20220218224302.5282-2-osalvador@suse.de
Fixes: da4490c958ad ("mm: handle uninitialized numa nodes gracefully")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
- bitops & cpumask:
- Always inline various generic helpers, to improve code generation,
but also for instrumentation, found by noinstr validation.
- Add a x86-specific cpumask_clear_cpu() helper to improve code generation
- atomics:
- Fix atomic64_{read_acquire,set_release} fallbacks
- lockdep:
- Fix /proc/lockdep output loop iteration for classes
- Fix /proc/lockdep potential access to invalid memory
- minor cleanups
- Add Mark Rutland as reviewer for atomic primitives
- jump labels:
- Clean up the code a bit
- misc:
- Add __sched annotations to percpu rwsem primitives
- Enable RT_MUTEXES on PREEMPT_RT by default
- Stray v8086_mode() inlining fix, result of noinstr objtool validation
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=04kk
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Changes in this cycle were:
Bitops & cpumask:
- Always inline various generic helpers, to improve code generation,
but also for instrumentation, found by noinstr validation.
- Add a x86-specific cpumask_clear_cpu() helper to improve code
generation
Atomics:
- Fix atomic64_{read_acquire,set_release} fallbacks
Lockdep:
- Fix /proc/lockdep output loop iteration for classes
- Fix /proc/lockdep potential access to invalid memory
- Add Mark Rutland as reviewer for atomic primitives
- Minor cleanups
Jump labels:
- Clean up the code a bit
Misc:
- Add __sched annotations to percpu rwsem primitives
- Enable RT_MUTEXES on PREEMPT_RT by default
- Stray v8086_mode() inlining fix, result of noinstr objtool
validation"
* tag 'locking-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Refactor #ifdef of struct static_key
jump_label: Avoid unneeded casts in STATIC_KEY_INIT_{TRUE,FALSE}
locking/lockdep: Iterate lock_classes directly when reading lockdep files
x86/ptrace: Always inline v8086_mode() for instrumentation
cpumask: Add a x86-specific cpumask_clear_cpu() helper
locking: Enable RT_MUTEXES by default on PREEMPT_RT.
locking/local_lock: Make the empty local_lock_*() function a macro.
atomics: Fix atomic64_{read_acquire,set_release} fallbacks
locking: Add missing __sched attributes
cpumask: Always inline helpers which use bit manipulation functions
asm-generic/bitops: Always inline all bit manipulation helpers
locking/lockdep: Avoid potential access of invalid memory in lock_class
lockdep: Use memset_startat() helper in reinit_class()
MAINTAINERS: add myself as reviewer for atomics
With CONFIG_X86_KERNEL_IBT=y and a version of ld.lld prior to 14.0.0,
there are numerous objtool warnings along the lines of:
warning: objtool: .plt+0x6: indirect jump found in RETPOLINE build
This is a known issue that has been resolved in ld.lld 14.0.0. Prevent
CONFIG_X86_KERNEL_IBT from being selectable when using one of these
problematic ld.lld versions.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220318230747.3900772-3-nathan@kernel.org
Commit 156ff4a544 ("x86/ibt: Base IBT bits") added a check for a crash
with 'clang -fcf-protection=branch -mfentry -pg', which intended to
exclude Clang versions older than 14.0.0 from selecting
CONFIG_X86_KERNEL_IBT.
clang-11 does not have the issue that the check is testing for, so
CONFIG_X86_KERNEL_IBT is selectable. Unfortunately, there is a different
crash in clang-11 that was fixed in clang-12. To make matters worse,
that crash does not appear to be entirely deterministic, as the same
input to the compiler will sometimes crash and other times not, which
makes dynamically checking for the crash like the '-pg' one unreliable.
To make everything work properly for all common versions of clang, use a
hard version check of 14.0.0, as that will be the first release upstream
that has both bugs properly fixed.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220318230747.3900772-2-nathan@kernel.org
- Fix address filtering for Intel/PT,ARM/CoreSight
- Enable Intel/PEBS format 5
- Allow more fixed-function counters for x86
- Intel/PT: Enable not recording Taken-Not-Taken packets
- Add a few branch-types
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XPuo
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event updates from Ingo Molnar:
- Fix address filtering for Intel/PT,ARM/CoreSight
- Enable Intel/PEBS format 5
- Allow more fixed-function counters for x86
- Intel/PT: Enable not recording Taken-Not-Taken packets
- Add a few branch-types
* tag 'perf-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix the build on !CONFIG_PHYS_ADDR_T_64BIT
perf: Add irq and exception return branch types
perf/x86/intel/uncore: Make uncore_discovery clean for 64 bit addresses
perf/x86/intel/pt: Add a capability and config bit for disabling TNTs
perf/x86/intel/pt: Add a capability and config bit for event tracing
perf/x86/intel: Increase max number of the fixed counters
KVM: x86: use the KVM side max supported fixed counter
perf/x86/intel: Enable PEBS format 5
perf/core: Allow kernel address filter when not filtering the kernel
perf/x86/intel/pt: Fix address filter config for 32-bit kernel
perf/core: Fix address filter parser for multiple filters
x86: Share definition of __is_canonical_address()
perf/x86/intel/pt: Relax address filter validation
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-03-21 v2
We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).
The main changes are:
1) Custom SEC() handling in libbpf, from Andrii.
2) subskeleton support, from Delyan.
3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.
4) Fix net.core.bpf_jit_harden race, from Hou.
5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.
6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.
7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.
8) Enable non-atomic allocations in local storage, from Joanne.
9) Various var_off ptr_to_btf_id fixed, from Kumar.
10) bpf_ima_file_hash helper, from Roberto.
11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
bpftool: Fix a bug in subskeleton code generation
bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
bpf: Fix bpf_prog_pack for multi-node setup
bpf: Fix warning for cast from restricted gfp_t in verifier
bpf, arm: Fix various typos in comments
libbpf: Close fd in bpf_object__reuse_map
bpftool: Fix print error when show bpf map
bpf: Fix kprobe_multi return probe backtrace
Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
bpf: Simplify check in btf_parse_hdr()
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
bpf: Check for NULL return from bpf_get_btf_vmlinux
selftests/bpf: Test skipping stacktrace
bpf: Adjust BPF stack helper functions to accommodate skip > 0
bpf: Select proper size for bpf_prog_pack
...
====================
Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
<asm/pci_x86.h> uses raw_spinlock_t, __init, and EINVAL; #include the
appropriate files to prevent build errors.
../arch/x86/include/asm/pci_x86.h:105:8: error: unknown type name ‘raw_spinlock_t’
../arch/x86/include/asm/pci_x86.h:141:20: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘dmi_check_pciprobe’
../arch/x86/include/asm/pci_x86.h:150:10: error: ‘EINVAL’ undeclared (first use in this function)
Link: https://lore.kernel.org/r/20220226213703.24041-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
- Various buffer and array bounds related fixes
-----BEGIN PGP SIGNATURE-----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=gm8R
-----END PGP SIGNATURE-----
Merge tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull bounds fixes from Kees Cook:
"These are a handful of buffer and array bounds fixes that I've been
carrying in preparation for the coming memcpy improvements and the
enabling of '-Warray-bounds' globally.
There are additional similar fixes in other maintainer's trees, but
these ended up getting carried by me. :)"
* tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
media: omap3isp: Use struct_group() for memcpy() region
tpm: vtpm_proxy: Check length to avoid compiler warning
alpha: Silence -Warray-bounds warnings
m68k: cmpxchg: Dereference matching size
intel_th: msu: Use memset_startat() for clearing hw header
KVM: x86: Replace memset() "optimization" with normal per-field writes
- Convert overflow selftest to KUnit
- Convert stackinit selftest to KUnit
- Implement size_t saturating arithmetic helpers
- Allow struct_size() to be used in initializers
-----BEGIN PGP SIGNATURE-----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=eRcK
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"These changes come in roughly two halves: support of Gustavo A. R.
Silva's struct_size() work via additional helpers for catching
overflow allocation size calculations, and conversions of selftests to
KUnit (which includes some tweaks for UML + Clang):
- Convert overflow selftest to KUnit
- Convert stackinit selftest to KUnit
- Implement size_t saturating arithmetic helpers
- Allow struct_size() to be used in initializers"
* tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: stackinit: Convert to KUnit
um: Allow builds with Clang
lib: overflow: Convert to Kunit
overflow: Provide constant expression struct_size
overflow: Implement size_t saturating arithmetic helpers
test_overflow: Regularize test reporting output
New drivers
- Driver for Texas Instruments TMP464 and TMP468
- Driver for Vicor PLI1209BC Digital Supervisor
- Driver for ASUS EC
Improvements to existing drivers:
- adt7x10: Convert to use regmap, convert to use with_info API,
use hwmon_notify_event, and other cleanup
- aquacomputer_d5next: Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors: Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors: Support T_Sensor on Prime X570-Pro
Deprecate driver (replaced by new driver)
- axi-fan-control: Use hwmon_notify_event
- dell-smm: Clean up CONFIG_I8K, disable fan type support for
Inspiron 3505, various other cleanup
- hwmon core: Report attribute name with udev events,
Add "label" attribute to ABI,
Add support for pwm auto channels attribute
- max6639: Add regulator support
- lm70: Add support for TI TMP125
- lm83: Cleanup, convert to use with_info API
- mlxreg-fan: Use pwm attribute for setting fan speed low limit
- nct6775: Sdd ASUS ROG STRIX Z390/Z490/X570-* / PRIME X570-P,
PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A,
and support for TSI temperature registers
- occ: Add various new sysfs attributes
- pmbus core: Handle VIN unit off status,
Add regulator supply into macro,
Add get_error_flags support to regulator ops
- pmbus/adm1275: Allow setting sample averaging
- pmbus/lm25066: Add regulator support
- pmbus/xdpe12284: Add support for xdpe11280 and register as regulator
- powr1220: Convert to with_info API,
Add support for Lattice's POWR1014 power manager IC
- sch56xx: Cleanup and minor improvements
- sch5627: Add pwmX_auto_channels_temp support
- tc654: Add thermal_cooling device support
-----BEGIN PGP SIGNATURE-----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=4u33
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Texas Instruments TMP464 and TMP468 driver
- Vicor PLI1209BC Digital Supervisor driver
- ASUS EC driver
Improvements to existing drivers:
- adt7x10:
- Convert to use regmap
- convert to use with_info API
- use hwmon_notify_event
- other cleanup
- aquacomputer_d5next:
- Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors:
- Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors:
- Support T_Sensor on Prime X570-Pro
- Deprecate driver (replaced by new driver)
- axi-fan-control:
- Use hwmon_notify_event
- dell-smm:
- Clean up CONFIG_I8K
- disable fan type support for Inspiron 3505
- various other cleanup
- hwmon core:
- Report attribute name with udev events
- Add "label" attribute to ABI,
- Add support for pwm auto channels attribute
- max6639:
- Add regulator support
- lm70:
- Add support for TI TMP125
- lm83:
- Cleanup, convert to use with_info API
- mlxreg-fan:
- Use pwm attribute for setting fan speed low limit
- nct6775:
- Add board ID's for ASUS ROG STRIX Z390/Z490/X570-* / PRIME
X570-P, PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A
- Add support for TSI temperature registers
- occ:
- Add various new sysfs attributes
- pmbus core:
- Handle VIN unit off status
- Add regulator supply into macro
- Add get_error_flags support to regulator ops
- pmbus/adm1275:
- Allow setting sample averaging
- pmbus/lm25066:
- Add regulator support
- pmbus/xdpe12284:
- Add support for xdpe11280
- register as regulator
- powr1220:
- Convert to with_info API
- Add support for Lattice's POWR1014 power manager IC
- sch56xx:
- Cleanup and minor improvements
- sch5627:
- Add pwmX_auto_channels_temp support
- tc654:
- Add thermal_cooling device support"
* tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklist
hwmon: (pmbus) Add Vin unit off handling
hwmon: (scpi-hwmon): Use of_device_get_match_data()
hwmon: (axi-fan-control) Use hwmon_notify_event
hwmon: (vexpress-hwmon) Use of_device_get_match_data()
hwmon: Add driver for Texas Instruments TMP464 and TMP468
dt-bindings: hwmon: add tmp464.yaml
dt-bindings: hwmon: Add sample averaging properties for ADM1275
hwmon: (adm1275) Allow setting sample averaging
hwmon: (xdpe12284) Add regulator support
hwmon: (xdpe12284) Add support for xdpe11280
dt-bindings: trivial-devices: Add xdpe11280
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk 360
hwmon: (sch5627) Add pwmX_auto_channels_temp support
hwmon: (core) Add support for pwm auto channels attribute
hwmon: (lm70) Add ti,tmp125 support
dt-bindings: Add ti,tmp125 temperature sensor binding
hwmon: (pmbus/pli1209bc) Add regulator support
hwmon: (pmbus) Add support for pli1209bc
dt-bindings:trivial-devices: Add pli1209bc
...
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user
space via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform
and fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's
Tsens driver and TI thermal platforms (Dmitry Baryshkov, Romain
Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT
binding (Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt
is optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=6PYL
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"As far as new functionality is concerned, there is a new thermal
driver for the Intel Hardware Feedback Interface (HFI) along with some
intel-speed-select utility changes to support it. There are also new
DT compatible strings for a couple of platforms, and thermal zones on
some platforms will be registered as HWmon sensors now.
Apart from the above, some drivers are updated (fixes mostly) and
there is a new piece of documentation for the Intel DPTF (Dynamic
Power and Thermal Framework) sysfs interface.
Specifics:
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user space
via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform and
fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's Tsens
driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT binding
(Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt is
optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
interface documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy
Dunlap)"
* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
Documentation: thermal: DPTF Documentation
MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
thermal/drivers/brcmstb_thermal: Interrupt is optional
thermal: tegra-bpmp: Handle errors in BPMP response
drivers/thermal/ti-soc-thermal: Add hwmon support
dt-bindings: thermal: tsens: Add msm8953 compatible
dt-bindings: thermal: Add sm8150 compatible string for LMh
thermal/drivers/qcom/lmh: Add support for sm8150
thermal/drivers/tsens: register thermal zones as hwmon sensors
MAINTAINERS: thermal: samsung: Drop obsolete properties
dt-bindings: thermal: samsung: Convert to dtschema
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: Replace acpi_bus_get_device()
...
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural
support for LPI to avoid using it on x86 by mistake (Mario
Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver
to work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix
up white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
-----BEGIN PGP SIGNATURE-----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=WlR9
-----END PGP SIGNATURE-----
Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration
of devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=uB8P
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new functionality perspective, the most significant items
here are the new driver for the 'ARM Generic Diagnostic Dump and
Reset' device, the extension of fine grain fan control in the ACPI fan
driver, and the change making it possible to use CPPC information to
obtain CPU capacity.
There are also a few new quirks, a bunch of fixes, including the
platform-level _OSC handling change to make it actually take the
platform firmware response into account, some code and documentation
cleanups, and a notable update of the ACPI device enumeration
documentation.
Specifics:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration of
devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko)"
* tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
clocksource: acpi_pm: fix return value of __setup handler
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI: tables: Add AGDI to the list of known table signatures
ACPI/APEI: Limit printable size of BERT table data
ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
ACPI: APEI: fix return value of __setup handlers
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
ACPICA: Avoid walking the ACPI Namespace if it is not there
...
- Reduce the amount of work to release a task stack in context
switch. There is no real reason to do cgroup accounting and memory
freeing in this performance sensitive context. Aside of this the
invoked functions cannot be called from this preemption disabled
context on PREEMPT_RT enabled kernels. Solve this by moving the
accounting into do_exit() and delaying the freeing of the stack unless
the vmap stack can be cached.
- Provide a mechanism to delay raising signals from atomic context on
PREEMPT_RT enabled kernels as sighand::lock cannot be acquired. Store
the information in the task struct and raise it in the exit path.
-----BEGIN PGP SIGNATURE-----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=uGTc
-----END PGP SIGNATURE-----
Merge tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core process handling RT latency updates from Thomas Gleixner:
- Reduce the amount of work to release a task stack in context switch.
There is no real reason to do cgroup accounting and memory freeing in
this performance sensitive context.
Aside of this the invoked functions cannot be called from this
preemption disabled context on PREEMPT_RT enabled kernels. Solve this
by moving the accounting into do_exit() and delaying the freeing of
the stack unless the vmap stack can be cached.
- Provide a mechanism to delay raising signals from atomic context on
PREEMPT_RT enabled kernels as sighand::lock cannot be acquired. Store
the information in the task struct and raise it in the exit path.
* tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
signal, x86: Delay calling signals in atomic on RT enabled kernels
fork: Use IS_ENABLED() in account_kernel_stack()
fork: Only cache the VMAP stack in finish_task_switch()
fork: Move task stack accounting to do_exit()
fork: Move memcg_charge_kernel_stack() into CONFIG_VMAP_STACK
fork: Don't assign the stack pointer in dup_task_struct()
fork, IA64: Provide alloc_thread_stack_node() for IA64
fork: Duplicate task_struct before stack allocation
fork: Redo ifdefs around task stack handling
- Simplify the PASID handling to allocate the PASID once, associate it to
the mm of a process and free it on mm_exit(). The previous attempt of
refcounted PASIDs and dynamic alloc()/free() turned out to be error
prone and too complex. The PASID space is 20bits, so the case of
resource exhaustion is a pure academic concern.
- Populate the PASID MSR on demand via #GP to avoid racy updates via IPIs.
- Reenable ENQCMD and let objtool check for the forbidden usage of ENQCMD
in the kernel.
- Update the documentation for Shared Virtual Addressing accordingly.
-----BEGIN PGP SIGNATURE-----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=Dy8V
-----END PGP SIGNATURE-----
Merge tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID support from Thomas Gleixner:
"Reenable ENQCMD/PASID support:
- Simplify the PASID handling to allocate the PASID once, associate
it to the mm of a process and free it on mm_exit().
The previous attempt of refcounted PASIDs and dynamic
alloc()/free() turned out to be error prone and too complex. The
PASID space is 20bits, so the case of resource exhaustion is a pure
academic concern.
- Populate the PASID MSR on demand via #GP to avoid racy updates via
IPIs.
- Reenable ENQCMD and let objtool check for the forbidden usage of
ENQCMD in the kernel.
- Update the documentation for Shared Virtual Addressing accordingly"
* tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Update documentation for SVA (Shared Virtual Addressing)
tools/objtool: Check for use of the ENQCMD instruction in the kernel
x86/cpufeatures: Re-enable ENQCMD
x86/traps: Demand-populate PASID MSR via #GP
sched: Define and initialize a flag to identify valid PASID in the task
x86/fpu: Clear PASID when copying fpstate
iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit
kernel/fork: Initialize mm's PASID
iommu/ioasid: Introduce a helper to check for valid PASIDs
mm: Change CONFIG option for mm->pasid field
iommu/sva: Rename CONFIG_IOMMU_SVA_LIB to CONFIG_IOMMU_SVA
-----BEGIN PGP SIGNATURE-----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=EF36
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Remove a misleading message and an unused function
* tag 'x86_cleanups_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Remove the 'strange power saving mode' hint from unknown NMI handler
x86/pat: Remove the unused set_pages_array_wt() function
vendors instead of proliferating home-grown solutions for technologies
which are pretty similar
-----BEGIN PGP SIGNATURE-----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=zWVD
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing updates from Borislav Petkov:
- Add shared confidential computing code which will be used by both
vendors instead of proliferating home-grown solutions for
technologies (SEV/SNP and TDX) which are pretty similar
* tag 'x86_cc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/cpa: Generalize __set_memory_enc_pgtable()
x86/coco: Add API to handle encryption mask
x86/coco: Explicitly declare type of confidential computing platform
x86/cc: Move arch/x86/{kernel/cc_platform.c => coco/core.c}
-----BEGIN PGP SIGNATURE-----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=PVnz
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV fix from Borislav Petkov:
- Add a missing function section annotation
* tag 'x86_sev_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head64: Add missing __head annotation to sme_postprocess_startup()
-----BEGIN PGP SIGNATURE-----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=djLR
-----END PGP SIGNATURE-----
Merge tag 'x86_paravirt_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt improvement from Borislav Petkov:
- Shorten CALL insns to pvops by a byte by using rip-relative
addressing
* tag 'x86_paravirt_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Use %rip-relative addressing in hook calls
-----BEGIN PGP SIGNATURE-----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=3AfB
-----END PGP SIGNATURE-----
Merge tag 'x86_build_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 Kconfig fix from Borislav Petkov:
- Correct Kconfig symbol visibility on x86
* tag 'x86_build_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Select ARCH_SELECT_MEMORY_MODEL only if FLATMEM and SPARSEMEM are possible
AMX, other misc insns.
- Update VMware-specific MAINTAINERS entries
-----BEGIN PGP SIGNATURE-----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=f7VZ
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add support for a couple new insn sets to the insn decoder:
AVX512-FP16, AMX, other misc insns.
- Update VMware-specific MAINTAINERS entries
* tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Mark VMware mailing list entries as email aliases
MAINTAINERS: Add Zack as maintainer of vmmouse driver
MAINTAINERS: Update maintainers for paravirt ops and VMware hypervisor interface
x86/insn: Add AVX512-FP16 instructions to the x86 instruction decoder
perf/tests: Add AVX512-FP16 instructions to x86 instruction decoder test
x86/insn: Add misc instructions to x86 instruction decoder
perf/tests: Add misc instructions to the x86 instruction decoder test
x86/insn: Add AMX instructions to the x86 instruction decoder
perf/tests: Add AMX instructions to x86 instruction decoder test
Add the PPIN number to sysfs so that sockets can be identified when
replacement is needed
- Minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=MWVZ
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu feature updates from Borislav Petkov:
- Merge the AMD and Intel PPIN code into a shared one by both vendors.
Add the PPIN number to sysfs so that sockets can be identified when
replacement is needed
- Minor fixes and cleanups
* tag 'x86_cpu_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Clear SME feature flag when not in use
x86/cpufeatures: Put the AMX macros in the word 18 block
topology/sysfs: Add PPIN in sysfs under cpu topology
topology/sysfs: Add format parameter to macro defining "show" functions for proc
x86/cpu: Read/save PPIN MSR during initialization
x86/cpu: X86_FEATURE_INTEL_PPIN finally has a CPUID bit
x86/cpu: Merge Intel and AMD ppin_init() functions
x86/CPU/AMD: Use default_groups in kobj_type
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmIvta8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNAIhB/oDSva5FryAFExVuIB+mqRkbZO9kj6fy/5J
ctN9LEVO2GI/U1TVAUWop1lXmP8Kbq5UCZOAuY8sz7dAZs7NRUWkwTrXVhaTpi6L
oxCfu5Afu76d/TGgivNz+G7/ewIJRFj5zCPmHezLF9iiWPUkcAsP0XCp4a0iOjU4
04O4d7TL/ap9ujEes+U0oEXHnyDTPrVB2OVE316FKD1fgztcjVJ2U+TxX5O4xitT
PPIfeQCjQBq1B2OC1cptE3wpP+YEr9OZJbx+Ieweidy1CSInEy0nZ13tLoUnGPGU
KPhsvO9daUCbhbd5IDRBuXmTi/sHU4NIB8LNEVzT1mUPnU8pCizv
=ziGg
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
Instead of using array_size, use a function that takes care of the
multiplication. While at it, switch to kvcalloc since this allocation
should not be very large.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_DISABLE_QUIRKS is irrevocably broken. The capability does not
advertise the set of quirks which may be disabled to userspace, so it is
impossible to predict the behavior of KVM. Worse yet,
KVM_CAP_DISABLE_QUIRKS will tolerate any value for cap->args[0], meaning
it fails to reject attempts to set invalid quirk bits.
The only valid workaround for the quirky quirks API is to add a new CAP.
Actually advertise the set of quirks that can be disabled to userspace
so it can predict KVM's behavior. Reject values for cap->args[0] that
contain invalid bits.
Finally, add documentation for the new capability and describe the
existing quirks.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220301060351.442881-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Non constant TSC is a nightmare on bare metal already, but with
virtualization it becomes a complete disaster because the workarounds
are horrible latency wise. That's also a preliminary for running RT in
a guest on top of a RT host.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Message-Id: <Yh5eJSG19S2sjZfy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guests X86_BUG_NULL_SEG if and only if the host has them. Use the info
from static_cpu_has_bug to form the 0x80000021 CPUID leaf that was
defined for Zen3. Userspace can then set the bit even on older CPUs
that do not have the bug, such as Zen2.
Do the same for X86_FEATURE_LFENCE_RDTSC as well, since various processors
have had very different ways of detecting it and not all of them are
available to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 0x80000021 defines some features (or lack of bugs) of AMD
processors. Expose the ones that make sense via KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_X86_OP_OPTIONAL_RET0 can only be used with 32-bit return values on 32-bit
systems, because unsigned long is only 32-bits wide there and 64-bit values
are returned in edx:eax.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit cf3e26427c.
Multi-vCPU Hyper-V guests started crashing randomly on boot with the
latest kvm/queue and the problem can be bisected the problem to this
particular patch. Basically, I'm not able to boot e.g. 16-vCPU guest
successfully anymore. Both Intel and AMD seem to be affected. Reverting
the commit saves the day.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
is going to be reverted, it's not going to be true anymore that
the zap-page flow does not free any 'struct kvm_mmu_page'. Introduce
an early flush before tdp_mmu_zap_leafs() returns, to preserve
bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.
The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.
However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:
15: 0f 90 c0 seto %al
18: c3 ret
19: cc int3
1a: 0f 1f 00 nopl (%rax)
1d: 0f 91 c0 setno %al
20: c3 ret
21: cc int3
22: 0f 1f 00 nopl (%rax)
25: 0f 92 c0 setb %al
28: c3 ret
29: cc int3
and this explodes like this:
int3: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1
Hardware name: Dell Inc. Precision WorkStation T3400 /0TP412, BIOS A14 04/30/2012
RIP: 0010:setc+0x5/0x8 [kvm]
Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \
1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \
0f 94 c0 c3 cc 0f 1f 00 0f 95 c0
Call Trace:
<TASK>
? x86_emulate_insn [kvm]
? x86_emulate_instruction [kvm]
? vmx_handle_exit [kvm_intel]
? kvm_arch_vcpu_ioctl_run [kvm]
? kvm_vcpu_ioctl [kvm]
? __x64_sys_ioctl
? do_syscall_64
? entry_SYSCALL_64_after_hwframe
</TASK>
Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.
Fixes: e463a09af2 ("x86: Add straight-line-speculation mitigation")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
again for IBT support. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge Intel Hardware Feedback Interface (HFI) thermal driver for
5.18-rc1 and update the intel-speed-select utility to support that
driver.
* thermal-hfi:
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: intel: hfi: Notify user space for HFI events
thermal: netlink: Add a new event to notify CPU capabilities change
thermal: intel: hfi: Enable notification interrupt
thermal: intel: hfi: Handle CPU hotplug events
thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface
x86/cpu: Add definitions for the Intel Hardware Feedback Interface
x86/Documentation: Describe the Intel Hardware Feedback Interface
Merge changes related to system sleep, PM domains changes and power
management documentation changes for 5.18-rc1:
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
* pm-sleep:
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
PM: sleep: Add device name to suspend_report_result()
PM: suspend: fix return value of __setup handler
PM: hibernate: fix __setup handler error handling
PM: hibernate: Clean up non-kernel-doc comments
PM: sleep: wakeup: Fix typos in comments
PM: hibernate: fix load_image_and_restore() error path
* pm-domains:
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
PM: domains: use dev_err_probe() to simplify error handling
PM: domains: Prevent power off for parent unless child is in deepest state
* pm-docs:
Documentation: admin-guide: pm: Document uncore frequency scaling
Merge ACPI EC driver changes, CPPC-related changes, ACPI fan driver
changes and ACPI battery driver changes for 5.18-rc1:
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
* acpi-ec:
ACPI: EC: Rearrange code in acpi_ec_submit_event()
ACPI: EC: Reduce indentation level in acpi_ec_submit_event()
ACPI: EC: Do not return result from advance_transaction()
* acpi-cppc:
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
* acpi-fan:
Documentation/admin-guide/acpi: Add documentation for fine grain control
ACPI: fan: Add additional attributes for fine grain control
ACPI: fan: Properly handle fine grain control
ACPI: fan: Optimize struct acpi_fan_fif
ACPI: fan: Separate file for attributes creation
ACPI: fan: Fix error reporting to user space
* acpi-battery:
ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3
Merge ACPI power management changes, ACPI device properties handling
changes, x86-specific ACPI changes and miscellaneous ACPI changes for
5.18-rc1:
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
* acpi-pm:
ACPI: EC / PM: Print additional debug message in acpi_ec_dispatch_gpe()
ACPI: PM: Print additional debug message in acpi_s2idle_wake()
* acpi-properties:
ACPI: property: Get rid of redundant 'else'
ACPI: properties: Consistently return -ENOENT if there are no more references
* acpi-misc:
clocksource: acpi_pm: fix return value of __setup handler
ACPI: clean up double words in two comments
* acpi-x86:
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
Add rethook for x86 implementation. Most of the code has been copied from
kretprobes on x86.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735286243.1084943.7477055110527046644.stgit@devnote2
Extra pass for subprog jit may fail (e.g. due to bpf_jit_harden race),
but bpf_func is not cleared for the subprog and jit_subprogs will
succeed. The running of the bpf program may lead to oops because the
memory for the jited subprog image has already been freed.
So fall back to interpreter mode by clearing bpf_func/jited/jited_len
when extra pass fails.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-2-houtao1@huawei.com
The ACPI specification says that OSPM should refuse to restore from
hibernate if the hardware signature changes, and should boot from
scratch. However, real BIOSes often vary the hardware signature in cases
where we *do* want to resume from hibernate, so Linux doesn't follow the
spec by default.
However, in a virtual environment there's no reason for the VMM to vary
the hardware signature *unless* it wants to trigger a clean reboot as
defined by the ACPI spec. So enable the check by default if a hypervisor
is detected.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The
Do you have a strange power saving mode enabled?
hint when unknown NMI happens dates back to i386 stone age, and isn't
currently really helpful.
Unknown NMIs are coming for many different reasons (broken firmware,
faulty hardware, ...) and rarely have anything to do with 'strange power
saving mode' (whatever that even is).
Just remove it as it's largerly misleading.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2203140924120.24795@cbobk.fhfr.pm
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIuUskeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGCFkH/2n3mpGXuITp0ZXE
TNrpbdZOof5SgLw+w7THswXuo6m5yRGNKQs9fvIvDD8Vf7/OdQQfPOmF1cIE5+nk
wcz6aHKbdrok8Jql2qjJqWXZ5xbGj6qywg3zZrwOUsCKFP5p+AjBJcmZOsvQHjSp
ASODy1moOlK+nO52TrMaJw74a8xQPmQiNa+T2P+FedEYjlcRH/c7hLJ7GEnL6+cC
/R4bATZq3tiInbTBlkC0hR0iVNgRXwXNyv9PEXrYYYHnekh8G1mgSNf06iejLcsG
aAYsW9NyPxu8zPhhHNx79K9o8BMtxGD4YQpsfdfIEnf9Q3euqAKe2evRWqHHlDms
RuSCtsc=
=M9Nc
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc8' into usb-next
We need the Xen USB fixes as other patches depend on those changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the function xen_apic_read(), the initialized value of 'ret' is unused
because it will be assigned by the function HYPERVISOR_platform_op(),
thus remove it.
Signed-off-by: jianchunfu <jianchunfu@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220314070514.2602-1-jianchunfu@cmss.chinamobile.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The generic earlyprintk= parsing already parses the optional ",keep",
no need to duplicate that in the xdbc driver.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220304152135.975568860@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently loops_per_jiffy is set in tsc_early_init(), but then don't
switch to delay_tsc, with the result that delay_loop is used with
loops_per_jiffy set for delay_tsc.
Then in (late) tsc_init() lpj_fine is set (which is mostly unused) and
after which use_tsc_delay() is finally called.
Move both loops_per_jiffy and use_tsc_delay() into
tsc_enable_sched_clock() which is called the moment tsc_khz is
determined, be it early or late. Keeping the lot consistent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220304152135.914397165@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two outstanding issues with CONFIG_X86_X32_ABI and
llvm-objcopy, with similar root causes:
1. llvm-objcopy does not properly convert .note.gnu.property when going
from x86_64 to x86_x32, resulting in a corrupted section when
linking:
https://github.com/ClangBuiltLinux/linux/issues/1141
2. llvm-objcopy produces corrupted compressed debug sections when going
from x86_64 to x86_x32, also resulting in an error when linking:
https://github.com/ClangBuiltLinux/linux/issues/514
After commit 41c5ef31ad71 ("x86/ibt: Base IBT bits"), the
.note.gnu.property section is always generated when
CONFIG_X86_KERNEL_IBT is enabled, which causes the first issue to become
visible with an allmodconfig build:
ld.lld: error: arch/x86/entry/vdso/vclock_gettime-x32.o:(.note.gnu.property+0x1c): program property is too short
To avoid this error, do not allow CONFIG_X86_X32_ABI to be selected when
using llvm-objcopy. If the two issues ever get fixed in llvm-objcopy,
this can be turned into a feature check.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-3-nathan@kernel.org
Commit 0bf6276392 ("x32: Warn and disable rather than error if
binutils too old") added a small test in arch/x86/Makefile because
binutils 2.22 or newer is needed to properly support elf32-x86-64. This
check is no longer necessary, as the minimum supported version of
binutils is 2.23, which is enforced at configuration time with
scripts/min-tool-version.sh.
Remove this check and replace all uses of CONFIG_X86_X32 with
CONFIG_X86_X32_ABI, as two symbols are no longer necessary.
[nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still
used, and simplify commit message to satisfy -tip requirements]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org
Objtool's --ibt option generates .ibt_endbr_seal which lists
superfluous ENDBR instructions. That is those instructions for which
the function is never indirectly called.
Overwrite these ENDBR instructions with a NOP4 such that these
function can never be indirect called, reducing the number of viable
ENDBR targets in the kernel.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.822545231@infradead.org
Find all ENDBR instructions which are never referenced and stick them
in a section such that the kernel can poison them, sealing the
functions from ever being an indirect call target.
This removes about 1-in-4 ENDBR instructions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.763643193@infradead.org
Having ENDBR in discarded sections can easily lead to relocations into
discarded sections which the linkers aren't really fond of. Objtool
also shouldn't generate them, but why tempt fate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.054842742@infradead.org
Annotate away some of the generic code references. This is things
where we take the address of a symbol for exception handling or return
addresses (eg. context switch).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.877758523@infradead.org
Similar to ibt_selftest_ip, apply the same pattern.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.700456643@infradead.org
The bits required to make the hardware go.. Of note is that, provided
the syscall entry points are covered with ENDBR, #CP doesn't need to
be an IST because we'll never hit the syscall gap.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.582331711@infradead.org
With IBT enabled builds we need ENDBR instructions at indirect jump
target sites, since we start execution of the JIT'ed code through an
indirect jump, the very first instruction needs to be ENDBR.
Similarly, since eBPF tail-calls use indirect branches, their landing
site needs to be an ENDBR too.
The trampolines need similar adjustment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.464998838@infradead.org
In order to allow kprobes to skip the ENDBR instructions at sym+0 for
X86_KERNEL_IBT builds, change _kprobe_addr() to take an architecture
callback to inspect the function at hand and modify the offset if
needed.
This streamlines the existing interface to cover more cases and
require less hooks. Once PowerPC gets fully converted there will only
be the one arch hook.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.405947704@infradead.org
Return trampoline must not use indirect branch to return; while this
preserves the RSB, it is fundamentally incompatible with IBT. Instead
use a retpoline like ROP gadget that defeats IBT while not unbalancing
the RSB.
And since ftrace_stub is no longer a plain RET, don't use it to copy
from. Since RET is a trivial instruction, poke it directly.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.347296408@infradead.org
Currently a lot of ftrace code assumes __fentry__ is at sym+0. However
with Intel IBT enabled the first instruction of a function will most
likely be ENDBR.
Change ftrace_location() to not only return the __fentry__ location
when called for the __fentry__ location, but also when called for the
sym+0 location.
Then audit/update all callsites of this function to consistently use
these new semantics.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.227581603@infradead.org
The code does:
## branch into array
mov jump_table(,%rax,8), %bufp
JMP_NOSPEC bufp
resulting in needing to mark the jump-table entries with ENDBR.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.110500806@infradead.org
Ensure the ASM functions have ENDBR on for IBT builds, this follows
the ARM64 example. Unlike ARM64, we'll likely end up overwriting them
with poison.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.992708941@infradead.org
Kernel entry points should be having ENDBR on for IBT configs.
The SYSCALL entry points are found through taking their respective
address in order to program them in the MSRs, while the exception
entry points are found through UNWIND_HINT_IRET_REGS.
The rule is that any UNWIND_HINT_IRET_REGS at sym+0 should have an
ENDBR, see the later objtool ibt validation patch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.933157479@infradead.org
Even though Xen currently doesn't advertise IBT, prepare for when it
will eventually do so and sprinkle the ENDBR dust accordingly.
Even though most of the entry points are IRET like, the CPL0
Hypervisor can set WAIT-FOR-ENDBR and demand ENDBR at these sites.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.873919996@infradead.org
By doing an early rewrite of 'jmp native_iret` in
restore_regs_and_return_to_kernel() we can get rid of the last
INTERRUPT_RETURN user and paravirt_iret.
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.815039833@infradead.org
Since commit 5c8f6a2e31 ("x86/xen: Add
xenpv_restore_regs_and_return_to_usermode()") Xen will no longer reach
this code and we can do away with the paravirt
SWAPGS/INTERRUPT_RETURN.
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.756014488@infradead.org
Add Kconfig, Makefile and basic instruction support for x86 IBT.
(Ab)use __DISABLE_EXPORTS to disable IBT since it's already employed
to mark compressed and purgatory. Additionally mark realmode with it
as well to avoid inserting ENDBR instructions there. While ENDBR is
technically a NOP, inserting them was causing some grief due to code
growth. There's also a problem with using __noendbr in code compiled
without -fcf-protection=branch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.519875203@infradead.org
The current annotation relies on not running objtool on the file; this
won't work when running objtool on vmlinux.o. Instead explicitly mark
__efi64_thunk() to be ignored.
This preserves the status quo, which is somewhat unfortunate. Luckily
this code is hardly ever used.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.402118218@infradead.org
* for-next/linkage:
arm64: module: remove (NOLOAD) from linker script
linkage: remove SYM_FUNC_{START,END}_ALIAS()
x86: clean up symbol aliasing
arm64: clean up symbol aliasing
linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}()
swapped back into EPC memory
- Prevent do_int3() from being kprobed, to avoid recursion
- Remap setup_data and setup_indirect structures properly when accessing
their members
- Correct the alternatives patching order for modules too
-----BEGIN PGP SIGNATURE-----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=YLph
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Free shmem backing storage for SGX enclave pages when those are
swapped back into EPC memory
- Prevent do_int3() from being kprobed, to avoid recursion
- Remap setup_data and setup_indirect structures properly when
accessing their members
- Correct the alternatives patching order for modules too
* tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Free backing memory after faulting the enclave page
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
x86/boot: Fix memremap of setup_indirect structures
x86/module: Fix the paravirt vs alternative order
There is a limited amount of SGX memory (EPC) on each system. When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code. Instead of
swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code. There is a hierarchy like this:
EPC <-> shmem <-> disk
After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed. Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running. The
memory is recovered when the enclave is destroyed and the backing
storage freed.
Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC. In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.
Cc: stable@vger.kernel.org
Fixes: 1728ab54b4 ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org
Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.
Fixes: 21e28290b3 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220310120915.63349-1-lihuafei1@huawei.com
The syscall_handler_t type for x86_64 was defined as 'long (*)(void)',
but always cast to 'long (*)(long, long, long, long, long, long)' before
use. This now triggers a warning (see below).
Define syscall_handler_t as the latter instead, and remove the cast.
This simplifies the code, and fixes the warning.
Warning:
In file included from ../arch/um/include/asm/processor-generic.h:13
from ../arch/x86/um/asm/processor.h:41
from ../include/linux/rcupdate.h:30
from ../include/linux/rculist.h:11
from ../include/linux/pid.h:5
from ../include/linux/sched.h:14
from ../include/linux/ptrace.h:6
from ../arch/um/kernel/skas/syscall.c:7:
../arch/um/kernel/skas/syscall.c: In function ‘handle_syscall’:
../arch/x86/um/shared/sysdep/syscalls_64.h:18:11: warning: cast between incompatible function types from ‘long int (*)(void)’ to ‘long int (*)(long int, long int, long int, long int, long int, long int)’ [
-Wcast-function-type]
18 | (((long (*)(long, long, long, long, long, long)) \
| ^
../arch/x86/um/asm/ptrace.h:36:62: note: in definition of macro ‘PT_REGS_SET_SYSCALL_RETURN’
36 | #define PT_REGS_SET_SYSCALL_RETURN(r, res) (PT_REGS_AX(r) = (res))
| ^~~
../arch/um/kernel/skas/syscall.c:46:33: note: in expansion of macro ‘EXECUTE_SYSCALL’
46 | EXECUTE_SYSCALL(syscall, regs));
| ^~~~~~~~~~~~~~~
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix following includecheck warning:
./arch/x86/um/syscalls_64.c: registers.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: dbba7f704a ("um: stop polluting the namespace with registers.h contents")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Now that all of the definitions have moved out of tracehook.h into
ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in
tracehook.h so remove it.
Update the few files that were depending upon tracehook.h to bring in
definitions to use the headers they need directly.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Always handle TIF_NOTIFY_SIGNAL in get_signal. With commit 35d0b389f3
("task_work: unconditionally run task_work from get_signal()") always
calling task_work_run all of the work of tracehook_notify_signal is
already happening except clearing TIF_NOTIFY_SIGNAL.
Factor clear_notify_signal out of tracehook_notify_signal and use it in
get_signal so that get_signal only needs one call of task_work_run.
To keep the semantics in sync update xfer_to_guest_mode_work (which
does not call get_signal) to call tracehook_notify_signal if either
_TIF_SIGPENDING or _TIF_NOTIFY_SIGNAL.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-8-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Break a header file circular dependency by removing the unnecessary
include of task_work.h from posix_timers.h.
sched.h -> posix-timers.h
posix-timers.h -> task_work.h
task_work.h -> sched.h
Add missing includes of task_work.h to:
arch/x86/mm/tlb.c
kernel/time/posix-cpu-timers.c
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-6-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
init_freq_invariance_cppc() was called in acpi_cppc_processor_probe(),
after CPU performance information and controls were populated from the
per-cpu _CPC objects.
But these _CPC objects provide information that helps with both CPU
(u-arch) and frequency invariance. Therefore, change the function name
to a more generic one, while adding the arch_ prefix, as this function
is expected to be defined differently by different architectures.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following W=1 kernel warnings:
arch/x86/xen/setup.c:725: warning: expecting prototype for
machine_specific_memory_setup(). Prototype was for xen_memory_setup()
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220307062554.8334-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The sched_clock() can be used very early since commit 857baa87b6
("sched/clock: Enable sched clock early"). In addition, with commit
38669ba205 ("x86/xen/time: Output xen sched_clock time from 0"), kdump
kernel in Xen HVM guest may panic at very early stage when accessing
&__this_cpu_read(xen_vcpu)->time as in below:
setup_arch()
-> init_hypervisor_platform()
-> x86_init.hyper.init_platform = xen_hvm_guest_init()
-> xen_hvm_init_time_ops()
-> xen_clocksource_read()
-> src = &__this_cpu_read(xen_vcpu)->time;
This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info'
embedded inside 'shared_info' during early stage until xen_vcpu_setup() is
used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.
However, when Xen HVM guest panic on vcpu >= 32, since
xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when
vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.
This patch calls xen_hvm_init_time_ops() again later in
xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is
registered when the boot vcpu is >= 32.
This issue can be reproduced on purpose via below command at the guest
side when kdump/kexec is enabled:
"taskset -c 33 echo c > /proc/sysrq-trigger"
The bugfix for PVM is not implemented due to the lack of testing
environment.
[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220302164032.14569-3-dongli.zhang@oracle.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The x86 boot documentation describes the setup_indirect structures and
how they are used. Only one of the two functions in ioremap.c that needed
to be modified to be aware of the introduction of setup_indirect
functionality was updated. Adds comparable support to the other function
where it was missing.
Fixes: b3c72fc9a7 ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-3-git-send-email-ross.philipson@oracle.com
As documented, the setup_indirect structure is nested inside
the setup_data structures in the setup_data list. The code currently
accesses the fields inside the setup_indirect structure but only
the sizeof(struct setup_data) is being memremapped. No crash
occurred but this is just due to how the area is remapped under the
covers.
Properly memremap both the setup_data and setup_indirect structures
in these cases before accessing them.
Fixes: b3c72fc9a7 ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-2-git-send-email-ross.philipson@oracle.com
Hyper-V provides host version number information that is output in
text form by a Linux guest when it boots. For whatever reason, the
formatting has historically been non-standard. Change it to output
in normal Windows version format for better readability.
Similar code for ARM64 guests already outputs in normal Windows
version format.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1646767364-2234-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
On this board the ACPI RSDP structure points to both a RSDT and an XSDT,
but the XSDT points to a truncated FADT. This causes all sorts of trouble
and usually a complete failure to boot after the following error occurs:
ACPI Error: Unsupported address space: 0x20 (*/hwregs-*)
ACPI Error: AE_SUPPORT, Unable to initialize fixed events (*/evevent-*)
ACPI: Unable to start ACPI Interpreter
This leaves the ACPI implementation in such a broken state that subsequent
kernel subsystem initialisations go wrong, resulting in among others
mismapped PCI memory, SATA and USB enumeration failures, and freezes.
As this is an older embedded platform that will likely never see any BIOS
updates to address this issue and its default shipping OS only complies to
ACPI 1.0, work around this by forcing `acpi=rsdt`. This patch, applied on
top of Linux 5.10.102, was confirmed on real hardware to fix the issue.
Signed-off-by: Mark Cilissen <mark@yotsuba.nl>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The init_freq_invariance_cppc code actually doesn't need the SMP
functionality. So setting the CONFIG_SMP as the check condition for
init_freq_invariance_cppc may cause the confusion to misunderstand the
CPPC. And the x86 CPPC file is better space to store the CPPC related
functions, while the init_freq_invariance_cppc is out of smpboot, that
means, the CONFIG_SMP won't be mandatory condition any more. And It's more
clear than before.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function init_freq_invariance will be used on x86 CPPC, so expose it in
the topology header.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The AMD maximum frequency ratio setting function depends on CPPC, so the
x86 CPPC implementation file is better space for this function.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename the cppc_msr.c to cppc.c in x86 ACPI, that expects to use this file
to cover more function implementation for ACPI CPPC beside MSR helpers.
Naming as "cppc" is more straightforward as one of the functionalities
under ACPI subsystem.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Expand KVM's mask for the AVIC host physical ID to the full 12 bits defined
by the architecture. The number of bits consumed by hardware is model
specific, e.g. early CPUs ignored bits 11:8, but there is no way for KVM
to enumerate the "true" size. So, KVM must allow using all bits, else it
risks rejecting completely legal x2APIC IDs on newer CPUs.
This means KVM relies on hardware to not assign x2APIC IDs that exceed the
"true" width of the field, but presumably hardware is smart enough to tie
the width to the max x2APIC ID. KVM also relies on hardware to support at
least 8 bits, as the legacy xAPIC ID is writable by software. But, those
assumptions are unavoidable due to the lack of any way to enumerate the
"true" width.
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220211000851.185799-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disallow calling tdp_mmu_set_spte_atomic() with a REMOVED "old" SPTE.
This solves a conundrum introduced by commit 3255530ab1 ("KVM: x86/mmu:
Automatically update iter->old_spte if cmpxchg fails"); if the helper
doesn't update old_spte in the REMOVED case, then theoretically the
caller could get stuck in an infinite loop as it will fail indefinitely
on the REMOVED SPTE. E.g. until recently, clear_dirty_gfn_range() didn't
check for a present SPTE and would have spun until getting rescheduled.
In practice, only the page fault path should "create" a new SPTE, all
other paths should only operate on existing, a.k.a. shadow present,
SPTEs. Now that the page fault path pre-checks for a REMOVED SPTE in all
cases, require all other paths to indirectly pre-check by verifying the
target SPTE is a shadow-present SPTE.
Note, this does not guarantee the actual SPTE isn't REMOVED, nor is that
scenario disallowed. The invariant is only that the caller mustn't
invoke tdp_mmu_set_spte_atomic() if the SPTE was REMOVED when last
observed by the caller.
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-25-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly check for a REMOVED leaf SPTE prior to attempting to map
the final SPTE when handling a TDP MMU fault. Functionally, this is a
nop as tdp_mmu_set_spte_atomic() will eventually detect the frozen SPTE.
Pre-checking for a REMOVED SPTE is a minor optmization, but the real goal
is to allow tdp_mmu_set_spte_atomic() to have an invariant that the "old"
SPTE is never a REMOVED SPTE.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-24-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zap defunct roots, a.k.a. roots that have been invalidated after their
last reference was initially dropped, asynchronously via the existing work
queue instead of forcing the work upon the unfortunate task that happened
to drop the last reference.
If a vCPU task drops the last reference, the vCPU is effectively blocked
by the host for the entire duration of the zap. If the root being zapped
happens be fully populated with 4kb leaf SPTEs, e.g. due to dirty logging
being active, the zap can take several hundred seconds. Unsurprisingly,
most guests are unhappy if a vCPU disappears for hundreds of seconds.
E.g. running a synthetic selftest that triggers a vCPU root zap with
~64tb of guest memory and 4kb SPTEs blocks the vCPU for 900+ seconds.
Offloading the zap to a worker drops the block time to <100ms.
There is an important nuance to this change. If the same work item
was queued twice before the work function has run, it would only
execute once and one reference would be leaked. Therefore, now that
queueing and flushing items is not anymore protected by kvm->slots_lock,
kvm_tdp_mmu_invalidate_all_roots() has to check root->role.invalid and
skip already invalid roots. On the other hand, kvm_mmu_zap_all_fast()
must return only after those skipped roots have been zapped as well.
These two requirements can be satisfied only if _all_ places that
change invalid to true now schedule the worker before releasing the
mmu_lock. There are just two, kvm_tdp_mmu_put_root() and
kvm_tdp_mmu_invalidate_all_roots().
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When zapping a TDP MMU root, perform the zap in two passes to avoid
zapping an entire top-level SPTE while holding RCU, which can induce RCU
stalls. In the first pass, zap SPTEs at PG_LEVEL_1G, and then
zap top-level entries in the second pass.
With 4-level paging, zapping a PGD that is fully populated with 4kb leaf
SPTEs take up to ~7 or so seconds (time varies based on kernel config,
number of (v)CPUs, etc...). With 5-level paging, that time can balloon
well into hundreds of seconds.
Before remote TLB flushes were omitted, the problem was even worse as
waiting for all active vCPUs to respond to the IPI introduced significant
overhead for VMs with large numbers of vCPUs.
By zapping 1gb SPTEs (both shadow pages and hugepages) in the first pass,
the amount of work that is done without dropping RCU protection is
strictly bounded, with the worst case latency for a single operation
being less than 100ms.
Zapping at 1gb in the first pass is not arbitrary. First and foremost,
KVM relies on being able to zap 1gb shadow pages in a single shot when
when repacing a shadow page with a hugepage. Zapping a 1gb shadow page
that is fully populated with 4kb dirty SPTEs also triggers the worst case
latency due writing back the struct page accessed/dirty bits for each 4kb
page, i.e. the two-pass approach is guaranteed to work so long as KVM can
cleany zap a 1gb shadow page.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 52-....: (20999 ticks this GP) idle=7be/1/0x4000000000000000
softirq=15759/15759 fqs=5058
(t=21016 jiffies g=66453 q=238577)
NMI backtrace for cpu 52
Call Trace:
...
mark_page_accessed+0x266/0x2f0
kvm_set_pfn_accessed+0x31/0x40
handle_removed_tdp_mmu_page+0x259/0x2e0
__handle_changed_spte+0x223/0x2c0
handle_removed_tdp_mmu_page+0x1c1/0x2e0
__handle_changed_spte+0x223/0x2c0
handle_removed_tdp_mmu_page+0x1c1/0x2e0
__handle_changed_spte+0x223/0x2c0
zap_gfn_range+0x141/0x3b0
kvm_tdp_mmu_zap_invalidated_roots+0xc8/0x130
kvm_mmu_zap_all_fast+0x121/0x190
kvm_mmu_invalidate_zap_pages_in_memslot+0xe/0x10
kvm_page_track_flush_slot+0x5c/0x80
kvm_arch_flush_shadow_memslot+0xe/0x10
kvm_set_memslot+0x172/0x4e0
__kvm_set_memory_region+0x337/0x590
kvm_vm_ioctl+0x49c/0xf80
Reported-by: David Matlack <dmatlack@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow yielding when zapping SPTEs after the last reference to a valid
root is put. Because KVM must drop all SPTEs in response to relevant
mmu_notifier events, mark defunct roots invalid and reset their refcount
prior to zapping the root. Keeping the refcount elevated while the zap
is in-progress ensures the root is reachable via mmu_notifier until the
zap completes and the last reference to the invalid, defunct root is put.
Allowing kvm_tdp_mmu_put_root() to yield fixes soft lockup issues if the
root in being put has a massive paging structure, e.g. zapping a root
that is backed entirely by 4kb pages for a guest with 32tb of memory can
take hundreds of seconds to complete.
watchdog: BUG: soft lockup - CPU#49 stuck for 485s! [max_guest_memor:52368]
RIP: 0010:kvm_set_pfn_dirty+0x30/0x50 [kvm]
__handle_changed_spte+0x1b2/0x2f0 [kvm]
handle_removed_tdp_mmu_page+0x1a7/0x2b8 [kvm]
__handle_changed_spte+0x1f4/0x2f0 [kvm]
handle_removed_tdp_mmu_page+0x1a7/0x2b8 [kvm]
__handle_changed_spte+0x1f4/0x2f0 [kvm]
tdp_mmu_zap_root+0x307/0x4d0 [kvm]
kvm_tdp_mmu_put_root+0x7c/0xc0 [kvm]
kvm_mmu_free_roots+0x22d/0x350 [kvm]
kvm_mmu_reset_context+0x20/0x60 [kvm]
kvm_arch_vcpu_ioctl_set_sregs+0x5a/0xc0 [kvm]
kvm_vcpu_ioctl+0x5bd/0x710 [kvm]
__se_sys_ioctl+0x77/0xc0
__x64_sys_ioctl+0x1d/0x20
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xae
KVM currently doesn't put a root from a non-preemptible context, so other
than the mmu_notifier wrinkle, yielding when putting a root is safe.
Yield-unfriendly iteration uses for_each_tdp_mmu_root(), which doesn't
take a reference to each root (it requires mmu_lock be held for the
entire duration of the walk).
tdp_mmu_next_root() is used only by the yield-friendly iterator.
tdp_mmu_zap_root_work() is explicitly yield friendly.
kvm_mmu_free_roots() => mmu_free_root_page() is a much bigger fan-out,
but is still yield-friendly in all call sites, as all callers can be
traced back to some combination of vcpu_run(), kvm_destroy_vm(), and/or
kvm_create_vm().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the system worker threads to zap the roots invalidated
by the TDP MMU's "fast zap" mechanism, implemented by
kvm_tdp_mmu_invalidate_all_roots().
At this point, apart from allowing some parallelism in the zapping of
roots, the workqueue is a glorified linked list: work items are added and
flushed entirely within a single kvm->slots_lock critical section. However,
the workqueue fixes a latent issue where kvm_mmu_zap_all_invalidated_roots()
assumes that it owns a reference to all invalid roots; therefore, no
one can set the invalid bit outside kvm_mmu_zap_all_fast(). Putting the
invalidated roots on a linked list... erm, on a workqueue ensures that
tdp_mmu_zap_root_work() only puts back those extra references that
kvm_mmu_zap_all_invalidated_roots() had gifted to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defer TLB flushes to the caller when freeing TDP MMU shadow pages instead
of immediately flushing. Because the shadow pages are freed in an RCU
callback, so long as at least one CPU holds RCU, all CPUs are protected.
For vCPUs running in the guest, i.e. consuming TLB entries, KVM only
needs to ensure the caller services the pending TLB flush before dropping
its RCU protections. I.e. use the caller's RCU as a proxy for all vCPUs
running in the guest.
Deferring the flushes allows batching flushes, e.g. when installing a
1gb hugepage and zapping a pile of SPs. And when zapping an entire root,
deferring flushes allows skipping the flush entirely (because flushes are
not needed in that case).
Avoiding flushes when zapping an entire root is especially important as
synchronizing with other CPUs via IPI after zapping every shadow page can
cause significant performance issues for large VMs. The issue is
exacerbated by KVM zapping entire top-level entries without dropping
RCU protection, which can lead to RCU stalls even when zapping roots
backing relatively "small" amounts of guest memory, e.g. 2tb. Removing
the IPI bottleneck largely mitigates the RCU issues, though it's likely
still a problem for 5-level paging. A future patch will further address
the problem by zapping roots in multiple passes to avoid holding RCU for
an extended duration.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When yielding in the TDP MMU iterator, service any pending TLB flush
before dropping RCU protections in anticipation of using the caller's RCU
"lock" as a proxy for vCPUs in the guest.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zap only leaf SPTEs in the TDP MMU's zap_gfn_range(), and rename various
functions accordingly. When removing mappings for functional correctness
(except for the stupid VFIO GPU passthrough memslots bug), zapping the
leaf SPTEs is sufficient as the paging structures themselves do not point
at guest memory and do not directly impact the final translation (in the
TDP MMU).
Note, this aligns the TDP MMU with the legacy/full MMU, which zaps only
the rmaps, a.k.a. leaf SPTEs, in kvm_zap_gfn_range() and
kvm_unmap_gfn_range().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all callers of zap_gfn_range() hold mmu_lock for write, drop
support for zapping with mmu_lock held for read. That all callers hold
mmu_lock for write isn't a random coincidence; now that the paths that
need to zap _everything_ have their own path, the only callers left are
those that need to zap for functional correctness. And when zapping is
required for functional correctness, mmu_lock must be held for write,
otherwise the caller has no guarantees about the state of the TDP MMU
page tables after it has run, e.g. the SPTE(s) it zapped can be
immediately replaced by a vCPU faulting in a page.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a dedicated helper for zapping a TDP MMU root, and use it in the three
flows that do "zap_all" and intentionally do not do a TLB flush if SPTEs
are zapped (zapping an entire root is safe if and only if it cannot be in
use by any vCPU). Because a TLB flush is never required, unconditionally
pass "false" to tdp_mmu_iter_cond_resched() when potentially yielding.
Opportunistically document why KVM must not yield when zapping roots that
are being zapped by kvm_tdp_mmu_put_root(), i.e. roots whose refcount has
reached zero, and further harden the flow to detect improper KVM behavior
with respect to roots that are supposed to be unreachable.
In addition to hardening zapping of roots, isolating zapping of roots
will allow future simplification of zap_gfn_range() by having it zap only
leaf SPTEs, and by removing its tricky "zap all" heuristic. By having
all paths that truly need to free _all_ SPs flow through the dedicated
root zapper, the generic zapper can be freed of those concerns.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't flush the TLBs when zapping all TDP MMU pages, as the only time KVM
uses the slow version of "zap everything" is when the VM is being
destroyed or the owning mm has exited. In either case, KVM_RUN is
unreachable for the VM, i.e. the guest TLB entries cannot be consumed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-15-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When recovering a potential hugepage that was shattered for the iTLB
multihit workaround, precisely zap only the target page instead of
iterating over the TDP MMU to find the SP that was passed in. This will
allow future simplification of zap_gfn_range() by having it zap only
leaf SPTEs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor __tdp_mmu_set_spte() to work with raw values instead of a
tdp_iter objects so that a future patch can modify SPTEs without doing a
walk, and without having to synthesize a tdp_iter.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-13-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if the new_spte being set by __tdp_mmu_set_spte() is a REMOVED_SPTE,
which is called out by the comment as being disallowed but not actually
checked. Keep the WARN on the old_spte as well, because overwriting a
REMOVED_SPTE in the non-atomic path is also disallowed (as evidence by
lack of splats with the existing WARN).
Fixes: 08f07c800e ("KVM: x86/mmu: Flush TLBs after zap in TDP MMU PF handler")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-12-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to read and write TDP MMU SPTEs instead of open coding
rcu_dereference() all over the place, and to provide a convenient
location to document why KVM doesn't exempt holding mmu_lock for write
from having to hold RCU (and any future changes to the rules).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-11-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop RCU protection after processing each root when handling MMU notifier
hooks that aren't the "unmap" path, i.e. aren't zapping. Temporarily
drop RCU to let RCU do its thing between roots, and to make it clear that
there's no special behavior that relies on holding RCU across all roots.
Currently, the RCU protection is completely superficial, it's necessary
only to make rcu_dereference() of SPTE pointers happy. A future patch
will rely on holding RCU as a proxy for vCPUs in the guest, e.g. to
ensure shadow pages aren't freed before all vCPUs do a TLB flush (or
rather, acknowledge the need for a flush), but in that case RCU needs to
be held until the flush is complete if and only if the flush is needed
because a shadow page may have been removed. And except for the "unmap"
path, MMU notifier events cannot remove SPs (don't toggle PRESENT bit,
and can't change the PFN for a SP).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-10-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Batch TLB flushes (with other MMUs) when handling ->change_spte()
notifications in the TDP MMU. The MMU notifier path in question doesn't
allow yielding and correcty flushes before dropping mmu_lock.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-9-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Look for a !leaf=>leaf conversion instead of a PFN change when checking
if a SPTE change removed a TDP MMU shadow page. Convert the PFN check
into a WARN, as KVM should never change the PFN of a shadow page (except
when its being zapped or replaced).
From a purely theoretical perspective, it's not illegal to replace a SP
with a hugepage pointing at the same PFN. In practice, it's impossible
as that would require mapping guest memory overtop a kernel-allocated SP.
Either way, the check is odd.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-8-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the "shared" argument of for_each_tdp_mmu_root_yield_safe, thus ensuring
that readers do not ever acquire a reference to an invalid root. After this
patch, all readers except kvm_tdp_mmu_zap_invalidated_roots() treat
refcount=0/valid, refcount=0/invalid and refcount=1/invalid in exactly the
same way. kvm_tdp_mmu_zap_invalidated_roots() is different but it also
does not acquire a reference to the invalid root, and it cannot see
refcount=0/invalid because it is guaranteed to run after
kvm_tdp_mmu_invalidate_all_roots().
Opportunistically add a lockdep assertion to the yield-safe iterator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eager page splitting is an optimization; it does not have to be performed on
invalid roots. It is also the only case in which a reader might acquire
a reference to an invalid root, so after this change we know that readers
will skip both dying and invalid roots.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assert that mmu_lock is held for write by users of the yield-unfriendly
TDP iterator. The nature of a shared walk means that the caller needs to
play nice with other tasks modifying the page tables, which is more or
less the same thing as playing nice with yielding. Theoretically, KVM
could gain a flow where it could legitimately take mmu_lock for read in
a non-preemptible context, but that's highly unlikely and any such case
should be viewed with a fair amount of scrutiny.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the misleading flush "handling" when zapping invalidated TDP MMU
roots, and document that flushing is unnecessary for all flavors of MMUs
when zapping invalid/obsolete roots/pages. The "handling" in the TDP MMU
is dead code, as zap_gfn_range() is called with shared=true, in which
case it will never return true due to the flushing being handled by
tdp_mmu_zap_spte_atomic().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly ignore the result of zap_gfn_range() when putting the last
reference to a TDP MMU root, and add a pile of comments to formalize the
TDP MMU's behavior of deferring TLB flushes to alloc/reuse. Note, this
only affects the !shared case, as zap_gfn_range() subtly never returns
true for "flush" as the flush is handled by tdp_mmu_zap_spte_atomic().
Putting the root without a flush is ok because even if there are stale
references to the root in the TLB, they are unreachable because KVM will
not run the guest with the same ASID without first flushing (where ASID
in this context refers to both SVM's explicit ASID and Intel's implicit
ASID that is constructed from VPID+PCID+EPT4A+etc...).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-5-seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix misleading and arguably wrong comments in the TDP MMU's fast zap
flow. The comments, and the fact that actually zapping invalid roots was
added separately, strongly suggests that zapping invalid roots is an
optimization and not required for correctness. That is a lie.
KVM _must_ zap invalid roots before returning from kvm_mmu_zap_all_fast(),
because when it's called from kvm_mmu_invalidate_zap_pages_in_memslot(),
KVM is relying on it to fully remove all references to the memslot. Once
the memslot is gone, KVM's mmu_notifier hooks will be unable to find the
stale references as the hva=>gfn translation is done via the memslots.
If KVM doesn't immediately zap SPTEs and userspace unmaps a range after
deleting a memslot, KVM will fail to zap in response to the mmu_notifier
due to not finding a memslot corresponding to the notifier's range, which
leads to a variation of use-after-free.
The other misleading comment (and code) explicitly states that roots
without a reference should be skipped. While that's technically true,
it's also extremely misleading as it should be impossible for KVM to
encounter a defunct root on the list while holding mmu_lock for write.
Opportunistically add a WARN to enforce that invariant.
Fixes: b7cccd397f ("KVM: x86/mmu: Fast invalidation for TDP MMU")
Fixes: 4c6654bd16 ("KVM: x86/mmu: Tear down roots before kvm_mmu_zap_all_fast returns")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly check for present SPTEs when clearing dirty bits in the TDP
MMU. This isn't strictly required for correctness, as setting the dirty
bit in a defunct SPTE will not change the SPTE from !PRESENT to PRESENT.
However, the guarded MMU_WARN_ON() in spte_ad_need_write_protect() would
complain if anyone actually turned on KVM's MMU debugging.
Fixes: a6a0b05da9 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220226001546.360188-3-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocations whose size is related to the memslot size can be arbitrarily
large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy"
sizes that fit in 32 bits.
Cc: stable@vger.kernel.org
Fixes: 7661809d49 ("mm: don't allow oversized kvmalloc() calls")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ever since commit
4e6292114c ("x86/paravirt: Add new features for paravirt patching")
there is an ordering dependency between patching paravirt ops and
patching alternatives, the module loader still violates this.
Fixes: 4e6292114c ("x86/paravirt: Add new features for paravirt patching")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220303112825.068773913@infradead.org
which support eIBRS, i.e., the hardware-assisted speculation restriction
after it has been shown that such machines are vulnerable even with the
hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as it
is insufficient to mitigate such attacks. Instead, switch to retpolines
on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
-----BEGIN PGP SIGNATURE-----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=Athd
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 spectre fixes from Borislav Petkov:
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation
restriction after it has been shown that such machines are vulnerable
even with the hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
it is insufficient to mitigate such attacks. Instead, switch to
retpolines on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
x86/speculation: Warn about Spectre v2 LFENCE mitigation
x86/speculation: Update link to AMD speculation whitepaper
x86/speculation: Use generic retpoline by default on AMD
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
Documentation/hw-vuln: Update spectre doc
x86/speculation: Add eIBRS + Retpoline options
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
* Tweaks to the paravirtualization code, to avoid using them
when they're pointless or harmful
x86 host:
* Fix for SRCU lockdep splat
* Brown paper bag fix for the propagation of errno
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIkkdsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP15Qf7B8BXNMlNkret5WN/4pGf06gNdIY6
ZqC8t/Lx1+fCkzGk+VtAw0bxRscOF4z1XzvfywO5ZI5bxQB/b2xTyBkVY90SqhsB
shug5QpikejpmvVZJXxwD3+loCUah2T6FUT6QJa0sKVhW+XiqOva8fAmYLG5agaa
VGvqFXTXiVmbiw/O9ZI/CfUC0WNrn+I1iDO+oGWyhv/22tePxGCizVczRFJn6DAD
Vh5P6AfOqXjmzdpUeOiU544FQZPHAZehb7/xYc0T9GSW4fPnTmHwRzwhUqgJnx7d
3E+eWGwny+Q/OrpKf7SbxtB65yn7lHRmdN/YtCHygl4sjs6CdjSPY8/9jQ==
=PPz1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 guest:
- Tweaks to the paravirtualization code, to avoid using them when
they're pointless or harmful
x86 host:
- Fix for SRCU lockdep splat
- Brown paper bag fix for the propagation of errno"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run
KVM: x86/mmu: Passing up the error state of mmu_alloc_shadow_roots()
KVM: x86: Yield to IPI target vCPU only if it is busy
x86/kvmclock: Fix Hyper-V Isolated VM's boot issue when vCPUs > 64
x86/kvm: Don't waste memory if kvmclock is disabled
x86/kvm: Don't use PV TLB/yield when mwait is advertised
The commit
44a3918c82 ("x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting")
added a warning for the "eIBRS + unprivileged eBPF" combination, which
has been shown to be vulnerable against Spectre v2 BHB-based attacks.
However, there's no warning about the "eIBRS + LFENCE retpoline +
unprivileged eBPF" combo. The LFENCE adds more protection by shortening
the speculation window after a mispredicted branch. That makes an attack
significantly more difficult, even with unprivileged eBPF. So at least
for now the logic doesn't warn about that combination.
But if you then add SMT into the mix, the SMT attack angle weakens the
effectiveness of the LFENCE considerably.
So extend the "eIBRS + unprivileged eBPF" warning to also include the
"eIBRS + LFENCE + unprivileged eBPF + SMT" case.
[ bp: Massage commit message. ]
Suggested-by: Alyssa Milburn <alyssa.milburn@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
With:
f8a66d608a ("x86,bugs: Unconditionally allow spectre_v2=retpoline,amd")
it became possible to enable the LFENCE "retpoline" on Intel. However,
Intel doesn't recommend it, as it has some weaknesses compared to
retpoline.
Now AMD doesn't recommend it either.
It can still be left available as a cmdline option. It's faster than
retpoline but is weaker in certain scenarios -- particularly SMT, but
even non-SMT may be vulnerable in some cases.
So just unconditionally warn if the user requests it on the cmdline.
[ bp: Massage commit message. ]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On x86_64 we must disable preemption before we enable interrupts
for stack faults, int3 and debugging, because the current task is using
a per CPU debug stack defined by the IST. If we schedule out, another task
can come in and use the same stack and cause the stack to be corrupted
and crash the kernel on return.
When CONFIG_PREEMPT_RT is enabled, spinlock_t locks become sleeping, and
one of these is the spin lock used in signal handling.
Some of the debug code (int3) causes do_trap() to send a signal.
This function calls a spinlock_t lock that has been converted to a
sleeping lock. If this happens, the above issues with the corrupted
stack is possible.
Instead of calling the signal right away, for PREEMPT_RT and x86,
the signal information is stored on the stacks task_struct and
TIF_NOTIFY_RESUME is set. Then on exit of the trap, the signal resume
code will send the signal when preemption is enabled.
[ rostedt: Switched from #ifdef CONFIG_PREEMPT_RT to
ARCH_RT_DELAYS_SIGNAL_SEND and added comments to the code. ]
[bigeasy: Add on 32bit as per Yang Shi, minor rewording. ]
[ tglx: Use a config option ]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/Ygq5aBB/qMQw6aP5@linutronix.de
On do_jit failure path, the header is freed by bpf_jit_binary_pack_free.
While bpf_jit_binary_pack_free doesn't require proper ro_header->size,
bpf_prog_pack_free still uses it. Set header->size in bpf_int_jit_compile
before calling bpf_jit_binary_pack_free.
Fixes: 1022a5498f ("bpf, x86_64: Use bpf_jit_binary_pack_alloc")
Fixes: 33c9805860 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220302175126.247459-3-song@kernel.org
kernel test robot reported kernel BUG like:
[ 44.587744][ T1] kernel BUG at arch/x86/mm/physaddr.c:76!
[ 44.590151][ T1] __vmalloc_area_node (mm/vmalloc.c:622 mm/vmalloc.c:2995)
[ 44.590151][ T1] __vmalloc_node_range (mm/vmalloc.c:3108)
[ 44.590151][ T1] __vmalloc_node (mm/vmalloc.c:3157)
which is triggered with HAVE_ARCH_HUGE_VMALLOC on 32-bit x86. Since BPF
only uses HAVE_ARCH_HUGE_VMALLOC for x86_64, turn it off for 32-bit x86.
Fixes: fac54e2bfb ("x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220302175126.247459-2-song@kernel.org
kvm_arch_vcpu_ioctl_run is already doing srcu_read_lock/unlock in two
places, namely vcpu_run and post_kvm_run_save, and a third is actually
needed around the call to vcpu->arch.complete_userspace_io to avoid
the following splat:
WARNING: suspicious RCU usage
arch/x86/kvm/pmu.c:190 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by CPU 28/KVM/370841:
#0: ff11004089f280b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x87/0x730 [kvm]
Call Trace:
<TASK>
dump_stack_lvl+0x59/0x73
reprogram_fixed_counter+0x15d/0x1a0 [kvm]
kvm_pmu_trigger_event+0x1a3/0x260 [kvm]
? free_moved_vector+0x1b4/0x1e0
complete_fast_pio_in+0x8a/0xd0 [kvm]
This splat is not at all unexpected, since complete_userspace_io callbacks
can execute similar code to vmexits. For example, SVM with nrips=false
will call into the emulator from svm_skip_emulated_instruction().
While it's tempting to never acquire kvm->srcu for an uninitialized vCPU,
practically speaking there's no penalty to acquiring kvm->srcu "early"
as the KVM_MP_STATE_UNINITIALIZED path is a one-time thing per vCPU. On
the other hand, seemingly innocuous helpers like kvm_apic_accept_events()
and sync_regs() can theoretically reach code that might access
SRCU-protected data structures, e.g. sync_regs() can trigger forced
existing of nested mode via kvm_vcpu_ioctl_x86_set_vcpu_events().
Reported-by: Like Xu <likexu@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like on the optional mmu_alloc_direct_roots() path, once shadow
path reaches "r = -EIO" somewhere, the caller needs to know the actual
state in order to enter error handling and avoid something worse.
Fixes: 4a38162ee9 ("KVM: MMU: load PDPTRs outside mmu_lock")
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220301124941.48412-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent Fam19h EPYC server line of processors from AMD support system
management functionality via HSMP (Host System Management Port) interface.
The Host System Management Port (HSMP) is an interface to provide
OS-level software with access to system management functions via a
set of mailbox registers.
More details on the interface can be found in chapter
"7 Host System Management Port (HSMP)" of the following PPR
https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
This patch adds new amd_hsmp module under the drivers/platforms/x86/
which creates miscdevice with an IOCTL interface to the user space.
/dev/hsmp is for running the hsmp mailbox commands.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Nathan Fontenot <nathan.fontenot@amd.com>
Link: https://lore.kernel.org/r/20220222050501.18789-1-nchatrad@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
second patch was supposed to fix the first, but in reality it was
just as broken, so both have to go.
x86 host:
* Revert incorrect assumption that cr3 changes come with preempt notifier
callbacks (they don't when static branches are changed, for example)
ARM host:
* Correctly synchronise PMR and co on PSCI CPU_SUSPEND
* Skip tests that depend on GICv3 when the HW isn't available
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIeGnUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCYgf9GPVUOQUbHVxVqvKB1ABnY3ZIZuS3
+/XLgVifSmXb2sPQmcKIPk7eQkxlzpnVdbznJO5qFMtVKRv/ppj+/ly2wwF8l+rR
m1XvyYo2sukK5vTpBrQiRm3aWY7vpx0ds4DStLnrnBuPF/U7x6WlHSL/BqXaNcSJ
e+SXd/UFhkg7dEQaU3eqXyf2/mMfR2ZLdUb4v+/UiV7kfzzvRqNERd8HUoVk2FcM
VYBr07ChaV4XB/dZsCDVSz2Z7f7rH3sMMW82ZHKjuFUEW4Dij9NiX2ycaeRvkSLG
tnliTuROCY2bOQeIVCTHf5XqCAAm7sA1AoClFaUy30+UW9s9j45NuhUQbA==
=nuHK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The bigger part of the change is a revert for x86 hosts. Here the
second patch was supposed to fix the first, but in reality it was just
as broken, so both have to go.
x86 host:
- Revert incorrect assumption that cr3 changes come with preempt
notifier callbacks (they don't when static branches are changed,
for example)
ARM host:
- Correctly synchronise PMR and co on PSCI CPU_SUSPEND
- Skip tests that depend on GICv3 when the HW isn't available"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3
Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"
Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"
KVM: arm64: Don't miss pending interrupts for suspended vCPU
Disable preemption when loading/putting the AVIC during an APICv refresh.
If the vCPU task is preempted and migrated ot a different pCPU, the
unprotected avic_vcpu_load() could set the wrong pCPU in the physical ID
cache/table.
Pull the necessary code out of avic_vcpu_{,un}blocking() and into a new
helper to reduce the probability of introducing this exact bug a third
time.
Fixes: df7e4827c5 ("KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC")
Cc: stable@vger.kernel.org
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This expands generic branch type classification by adding two more entries
there in i.e irq and exception return. Also updates the x86 implementation
to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com
Support 64-bit BAR size for discovery, and do not truncate return from
generic_uncore_mmio_box_ctl() to 32 bits.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20220218175418.421268-1-steve.wahl@hpe.com
Exit to userspace if setup_vmgexit_scratch() fails due to OOM or because
copying data from guest (userspace) memory failed/faulted. The OOM
scenario is clearcut, it's userspace's decision as to whether it should
terminate the guest, free memory, etc...
As for -EFAULT, arguably, any guest issue is a violation of the guest's
contract with userspace, and thus userspace needs to decide how to
proceed. E.g. userspace defines what is RAM vs. MMIO and communicates
that directly to the guest, KVM is not involved in deciding what is/isn't
RAM nor in communicating that information to the guest. If the scratch
GPA doesn't resolve to a memslot, then the guest is not honoring the
memory configuration as defined by userspace.
And if userspace unmaps an hva for whatever reason, then exiting to
userspace with -EFAULT is absolutely the right thing to do. KVM's ABI
currently sucks and doesn't provide enough information to act on the
-EFAULT, but that will hopefully be remedied in the future as there are
multiple use cases, e.g. uffd and virtiofs truncation, that shouldn't
require any work in KVM beyond returning -EFAULT with a small amount of
metadata.
KVM could define its ABI such that failure to access the scratch area is
reflected into the guest, i.e. establish a contract with userspace, but
that's undesirable as it limits KVM's options in the future, e.g. in the
potential uffd case any failure on a uaccess needs to kick out to
userspace. KVM does have several cases where it reflects these errors
into the guest, e.g. kvm_pv_clock_pairing() and Hyper-V emulation, but
KVM would preferably "fix" those instead of propagating the falsehood
that any memory failure is the guest's fault.
Lastly, returning a boolean as an "error" for that a helper that isn't
named accordingly never works out well.
Fixes: ad5b353240 ("KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure")
Cc: Alper Gun <alpergun@google.com>
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225205209.3881130-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN and bail if is_unsync_root() is passed a root for which there is no
shadow page, i.e. is passed the physical address of one of the special
roots, which do not have an associated shadow page. The current usage
squeaks by without bug reports because neither kvm_mmu_sync_roots() nor
kvm_mmu_sync_prev_roots() calls the helper with pae_root or pml4_root,
and 5-level AMD CPUs are not generally available, i.e. no one can coerce
KVM into calling is_unsync_root() on pml5_root.
Note, this doesn't fix the mess with 5-level nNPT, it just (hopefully)
prevents KVM from crashing.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225182248.3812651-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zap only obsolete roots when responding to zapping a single root shadow
page. Because KVM keeps root_count elevated when stuffing a previous
root into its PGD cache, shadowing a 64-bit guest means that zapping any
root causes all vCPUs to reload all roots, even if their current root is
not affected by the zap.
For many kernels, zapping a single root is a frequent operation, e.g. in
Linux it happens whenever an mm is dropped, e.g. process exits, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the generic kvm_reload_remote_mmus() and open code its
functionality into the two x86 callers. x86 is (obviously) the only
architecture that uses the hook, and is also the only architecture that
uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That
will change in a future patch, as x86's usage when zapping a single
shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only
MMUs whose root is being zapped actually need to be reloaded.
s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose.
Drop the generic code in anticipation of implementing s390 and x86 arch
specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely.
Opportunistically reword the x86 TDP MMU comment to avoid making
references to functions (and requests!) when possible, and to remove the
rather ambiguous "this".
No functional change intended.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a KVM_REQ_MMU_RELOAD request with a direct kvm_mmu_unload() call
when the guest's CR4.PCIDE changes. This will allow tweaking the logic
of KVM_REQ_MMU_RELOAD to free only obsolete/invalid roots, which is the
historical intent of KVM_REQ_MMU_RELOAD. The recent PCIDE behavior is
the only user of KVM_REQ_MMU_RELOAD that doesn't mark affected roots as
obsolete, needs to unconditionally unload the entire MMU, _and_ affects
only the current vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225182248.3812651-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Outer-privilege level return is not implemented in emulator,
move the unhandled logic into __load_segment_descriptor to
make it easier to understand why the checks for RET are
incomplete.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <5b7188e6388ac9f4567d14eab32db9adf3e00119.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code segment descriptor can be loaded by jmp/call/ret, iret
and int. The privilege checks are different between those
instructions above realmode. Although, the emulator has
use x86_transfer_type enumerate to differentiate them, but
it is not really used in __load_segment_descriptor(). Note,
far jump/call to call gate, task gate or task state segment
are not implemented in emulator.
As for far jump/call to code segment, if DPL > CPL for conforming
code or (RPL > CPL or DPL != CPL) for non-conforming code, it
should trigger #GP. The current checks are ok.
As for far return, if RPL < CPL or DPL > RPL for conforming
code or DPL != RPL for non-conforming code, it should trigger #GP.
Outer level return is not implemented above virtual-8086 mode in
emulator. So it implies that RPL <= CPL, but the current checks
wouldn't trigger #GP if RPL < CPL.
As for code segment loading in task switch, if DPL > RPL for conforming
code or DPL != RPL for non-conforming code, it should trigger #TS. Since
segment selector is loaded before segment descriptor when load state from
tss, it implies that RPL = CPL, so the current checks are ok.
The only problem in current implementation is missing RPL < CPL check for
far return. However, change code to follow the manual is better.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <e01f5ea70fc1f18f23da1182acdbc5c97c0e5886.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Intel's SDM on the "Instruction Set Reference", when
loading segment descriptor, not-present segment check should
be after all type and privilege checks. But the emulator checks
it first, then #NP is triggered instead of #GP if privilege fails
and segment is not present. Put not-present segment check after
type and privilege checks in __load_segment_descriptor().
Fixes: 38ba30ba51 (KVM: x86 emulator: Emulate task switch in emulator.c)
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hide the lapic's "raw" write helper inside lapic.c to force non-APIC code
to go through proper helpers when modification the vAPIC state. Keep the
read helper visible to outsiders for now, refactoring KVM to hide it too
is possible, it will just take more work to do so.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulate the x2APIC ICR as a single 64-bit register, as opposed to forking
it across ICR and ICR2 as two 32-bit registers. This mirrors hardware
behavior for Intel's upcoming IPI virtualization support, which does not
split the access.
Previous versions of Intel's SDM and AMD's APM don't explicitly state
exactly how ICR is reflected in the vAPIC page for x2APIC, KVM just
happened to speculate incorrectly.
Handling the upcoming behavior is necessary in order to maintain
backwards compatibility with KVM_{G,S}ET_LAPIC, e.g. failure to shuffle
the 64-bit ICR to ICR+ICR2 and vice versa would break live migration if
IPI virtualization support isn't symmetrical across the source and dest.
Cc: Zeng Guang <guang.zeng@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to handle 64-bit APIC read/writes via MSRs to deduplicate the
x2APIC and Hyper-V code needed to service reads/writes to ICR. Future
support for IPI virtualization will add yet another path where KVM must
handle 64-bit APIC MSR reads/write (to ICR).
Opportunistically fix the comment in the write path; ICR2 holds the
destination (if there's no shorthand), not the vector.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the low level read/write lapic helpers static, any accesses to the
local APIC from vendor code or non-APIC code should be routed through
proper helpers.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if KVM emulates an IPI without clearing the BUSY flag, failure to do
so could hang the guest if it waits for the IPI be sent.
Opportunistically use APIC_ICR_BUSY macro instead of open coding the
magic number, and add a comment to clarify why kvm_recalculate_apic_map()
is unconditionally invoked (it's really, really confusing for IPIs due to
the existence of fast paths that don't trigger a potential recalc).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't bother rewriting the ICR value into the vAPIC page on an AVIC IPI
virtualization failure, the access is a trap, i.e. the value has already
been written to the vAPIC page. The one caveat is if hardware left the
BUSY flag set (which appears to happen somewhat arbitrarily), in which
case go through the "nodecode" APIC-write path in order to clear the BUSY
flag.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the common kvm_apic_write_nodecode() to handle AVIC/APIC-write traps
instead of open coding the same exact code. This will allow making the
low level lapic helpers inaccessible outside of lapic.c code.
Opportunistically clean up the params to eliminate a bunch of svm=>vcpu
reflection.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the "raw" helper to read the vAPIC register after an APIC-write trap
VM-Exit. Hardware is responsible for vetting the write, and the caller
is responsible for sanitizing the offset. This is a functional change,
as it means KVM will consume whatever happens to be in the vAPIC page if
the write was dropped by hardware. But, unless userspace deliberately
wrote garbage into the vAPIC page via KVM_SET_LAPIC, the value should be
zero since it's not writable by the guest.
This aligns common x86 with SVM's AVIC logic, i.e. paves the way for
using the nodecode path to handle APIC-write traps when AVIC is enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the vAPIC offset adjustments done in the APIC-write trap path from
common x86 to VMX in anticipation of using the nodecode path for SVM's
AVIC. The adjustment reflects hardware behavior, i.e. it's technically a
property of VMX, no common x86. SVM's AVIC behavior is identical, so
it's a bit of a moot point, the goal is purely to make it easier to
understand why the adjustment is ok.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulating writes to SELF_IPI with a write to ICR has an unwanted side effect:
the value of ICR in vAPIC page gets changed. The lists SELF_IPI as write-only,
with no associated MMIO offset, so any write should have no visible side
effect in the vAPIC page.
Reported-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In emulation of writing to cr8, one of the lowest four bits in TPR[3:0]
is kept.
According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";
and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into
bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are
cleared.";
and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the
current sub-priority to be used when arbitrating lowest-priority messages.
This field is written with zero when TPR is written using the architectural
CR8 register.";
so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior
as in other scenarios.
This doesn't impact evaluation and delivery of pending virtual interrupts
because processor does not use the processor-priority sub-class to
determine which interrupts to delivery and which to inhibit.
Sub-class is used by hardware to arbitrate lowest priority interrupts,
but KVM just does a round-robin style delivery.
Fixes: b93463aa59 ("KVM: Accelerated apic support")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220210094506.20181-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For both CR0 and CR4, disassociate the TLB flush logic from the
MMU role logic. Instead of relying on kvm_mmu_reset_context() being
a superset of various TLB flushes (which is not necessarily going to
be the case in the future), always call it if the role changes
but also set the various TLB flush requests according to what is
in the manual.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD retpoline may be susceptible to speculation. The speculation
execution window for an incorrect indirect branch prediction using
LFENCE/JMP sequence may potentially be large enough to allow
exploitation using Spectre V2.
By default, don't use retpoline,lfence on AMD. Instead, use the
generic retpoline.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIb/PEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGugMH/R8icwG5gOjAuxBr
fuz9032ECVFS36Cy3ps9Eqgf5EdS4G6yz3joM4aNtp4B7e5FzI9lzBaHS8OAguNL
y7puFtBr9CywsnniJumZzciB9pEHmF/yyEKfMlRZA3JsRfLDacFstETp+duJnXoA
+s49IWsy1ot5zoherhDXcFLqDoFhLVU4hYwE1xpLpW/cllqmSnW8SDZMtWW1Ui/B
Of7zqINR4zBMmRjP4ymGq/ZrPWlFyWLdtOo0xxVoAQkeMgm33kfaaeGzfyK25FqR
JDGUZ7lkKvwz3PYh2hqJ7dc5K+vhJ18I+F1UmOiL6QAAUF/k8jq7i3Qaf6MKqh2Z
2v+A5k0=
=Hiar
-----END PGP SIGNATURE-----
Backmerge tag 'v5.17-rc6' into drm-next
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In Kconfig, inside the "Processor type and features" menu, there is
the CONFIG_I8K option: "Dell i8k legacy laptop support". This is
very confusing - enabling CONFIG_I8K is not required for the kernel to
support old Dell laptops. This option is specific to the dell-smm-hwmon
driver, which mostly exports some hardware monitoring information and
allows the user to change fan speed.
This option is misplaced, so move CONFIG_I8K to drivers/hwmon/Kconfig,
where it belongs.
Also, modify the dependency order - change
select SENSORS_DELL_SMM
to
depends on SENSORS_DELL_SMM
as it is just a configuration option of dell-smm-hwmon. This includes
changing the option type from tristate to bool. It was tristate because
it could select CONFIG_SENSORS_DELL_SMM=m .
When running "make oldconfig" on configurations with
CONFIG_SENSORS_DELL_SMM enabled , this change will result in an
additional question (which could be printed several times during
bisecting). I think that tidying up the configuration is worth it,
though.
Next patch tweaks the description of CONFIG_I8K.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Pali Rohár <pali@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Gross <markgross@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220212125654.357408-1-mat.jonczyk@o2.pl
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
One of the things that CONFIG_HARDENED_USERCOPY sanity-checks is whether
an object that is about to be copied to/from userspace is overlapping
the stack at all. If it is, it performs a number of inexpensive
bounds checks. One of the finer-grained checks is whether an object
crosses stack frames within the stack region. Doing this on x86 with
CONFIG_FRAME_POINTER was cheap/easy. Doing it with ORC was deemed too
heavy, and was left out (a while ago), leaving the courser whole-stack
check.
The LKDTM tests USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM
try to exercise these cross-frame cases to validate the defense is
working. They have been failing ever since ORC was added (which was
expected). While Muhammad was investigating various LKDTM failures[1],
he asked me for additional details on them, and I realized that when
exact stack frame boundary checking is not available (i.e. everything
except x86 with FRAME_POINTER), it could check if a stack object is at
least "current depth valid", in the sense that any object within the
stack region but not between start-of-stack and current_stack_pointer
should be considered unavailable (i.e. its lifetime is from a call no
longer present on the stack).
Introduce ARCH_HAS_CURRENT_STACK_POINTER to track which architectures
have actually implemented the common global register alias.
Additionally report usercopy bounds checking failures with an offset
from current_stack_pointer, which may assist with diagnosing failures.
The LKDTM USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM tests
(once slightly adjusted in a separate patch) pass again with this fixed.
[1] https://github.com/kernelci/kernelci-project/issues/84
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
v1: https://lore.kernel.org/lkml/20220216201449.2087956-1-keescook@chromium.org
v2: https://lore.kernel.org/lkml/20220224060342.1855457-1-keescook@chromium.org
v3: https://lore.kernel.org/lkml/20220225173345.3358109-1-keescook@chromium.org
v4: - improve commit log (akpm)
When sending a call-function IPI-many to vCPUs, yield to the
IPI target vCPU which is marked as preempted.
but when emulating HLT, an idling vCPU will be voluntarily
scheduled out and mark as preempted from the guest kernel
perspective. yielding to idle vCPU is pointless and increase
unnecessary vmexit, maybe miss the true preempted vCPU
so yield to IPI target vCPU only if vCPU is busy and preempted
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1644380201-29423-1-git-send-email-lirongqing@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When Linux runs as an Isolated VM on Hyper-V, it supports AMD SEV-SNP
but it's partially enlightened, i.e. cc_platform_has(
CC_ATTR_GUEST_MEM_ENCRYPT) is true but sev_active() is false.
Commit 4d96f91091 per se is good, but with it now
kvm_setup_vsyscall_timeinfo() -> kvmclock_init_mem() calls
set_memory_decrypted(), and later gets stuck when trying to zere out
the pages pointed by 'hvclock_mem', if Linux runs as an Isolated VM on
Hyper-V. The cause is that here now the Linux VM should no longer access
the original guest physical addrss (GPA); instead the VM should do
memremap() and access the original GPA + ms_hyperv.shared_gpa_boundary:
see the example code in drivers/hv/connection.c: vmbus_connect() or
drivers/hv/ring_buffer.c: hv_ringbuffer_init(). If the VM tries to
access the original GPA, it keepts getting injected a fault by Hyper-V
and gets stuck there.
Here the issue happens only when the VM has >=65 vCPUs, because the
global static array hv_clock_boot[] can hold 64 "struct
pvclock_vsyscall_time_info" (the sizeof of the struct is 64 bytes), so
kvmclock_init_mem() only allocates memory in the case of vCPUs > 64.
Since the 'hvclock_mem' pages are only useful when the kvm clock is
supported by the underlying hypervisor, fix the issue by returning
early when Linux VM runs on Hyper-V, which doesn't support kvm clock.
Fixes: 4d96f91091 ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()")
Tested-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Message-Id: <20220225084600.17817-1-decui@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even if "no-kvmclock" is passed in cmdline parameter, the guest kernel
still allocates hvclock_mem which is scaled by the number of vCPUs,
let's check kvmclock enable in advance to avoid this memory waste.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1645520523-30814-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MWAIT is advertised in host is not overcommitted scenario, however, PV
TLB/sched yield should be enabled in host overcommitted scenario. Let's
add the MWAIT checking when enabling PV TLB/sched yield.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1645777780-2581-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For cleanliness, do not leave a stale GVA in the cache after all the roots are
cleared. In practice, kvm_mmu_load will go through kvm_mmu_sync_roots if
paging is on, and will not use vcpu_match_mmio_gva at all if paging is off.
However, leaving data in the cache might cause bugs in the future.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the guest PGD is now loaded after the MMU has been set up
completely, the desired role for a cache hit is simply the current
mmu_role. There is no need to compute it again, so __kvm_mmu_new_pgd
can be folded in kvm_mmu_new_pgd.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that __kvm_mmu_new_pgd does not look at the MMU's root_level and
shadow_root_level anymore, pull the PGD load after the initialization of
the shadow MMUs.
Besides being more intuitive, this enables future simplifications
and optimizations because it's not necessary anymore to compute the
role outside kvm_init_mmu. In particular, kvm_mmu_reset_context was not
attempting to use a cached PGD to avoid having to figure out the new role.
With this change, it could follow what nested_{vmx,svm}_load_cr3 are doing,
and avoid unloading all the cached roots.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds