The delayed registration of sound card instance brings less benefit than
complication of kobject management. This commit ceases from it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210607081250.13397-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit takes ALSA dice driver to perform sequence replay for media
clock recovery.
Unlike the other types of device, DICE-based devices interpret the value
of syt field of CIP header in rx packets as presentation time for audio
playback, thus it's required for driver to compute value for outgoing
packet adequate to the device. It's done by media clock recovery by
handling tx packets.
The device starts packet transmission immediately at operation to
GLOBAL_ENABLE thus on-the-fly mode is not required.
DICE ASICs supports several pairs of isochronous packet streams.
Actually, maximum two pairs of streams are supported by devices.
We have three cases regarding to the number of streams:
1. a pair of streams
2. two tx packet streams and one rx packet streams
3. one tx packet streams and two rx packet streams
4. two pair of streams
The decision of playback timing is slightly different in the four cases.
In the case 1, sequence replay in the pair results in suitable playback
timing.
In the case 2, sequence replay from the first tx packet stream to rx
packet stream results in suitable playback timing.
In the case 3, sequence replay from tx packet stream to all of rx packet
stream results in suitable playback timing. Furthermore, the cycle to
start receiving packets should be the same between all rx packet streams.
In the case 4, sequence replay in each pair results in suitable playback
timing. Furthermore, the cycle to start receiving packets should be the
same between all rx packet streams.
The sequence replay is tested with below models:
* For case 1:
* TC Electronic Konnekt 24d (DiceII)
* TC Electronic Konnekt 8 (DiceII)
* TC Electronic Konnekt Live (DiceII)
* TC Electronic Impact Twin (DiceII)
* TC Electronic Digital Konnekt X32 (DiceII)
* TC Electronic Desktop Konnekt 6 (TCD2220)
* Solid State Logic Duende Classic (DiceII)
* Solid State Logic Duende Mini (DiceII)
* PreSonus FireStudio Project (TCD2210)
* PreSonus FireStudio Mobile (TCD2210)
* Lexicon I-ONIX FW810s (TCD2220)
* Avid Mbox 3 Pro (TCD2220)
* For case 2 (but case 1 depends on sampling transfer frequency):
* Alesis iO 26 (DiceII)
* Alesis iO 14 (DiceII)
* Alesis MultiMix 12 FireWire (DiceII)
* Focusrite Saffire Pro 26 (TCD2220)
* For case 3 (but case 1 depends on sampling transfer frequency):
* M-Audio Profire 610 (TCD2220)
* Loud Technology Mackie Onyx Blackbird (TCD2210)
* For case 4:
* TC Electronic Studio Konnekt 48 (DiceII + TCD2220)
* PreSonus FireStudio (DiceII)
* M-Audio Profire 2626 (TCD2220)
* Focusrite Liquid Saffire 56 (TCD2220)
* Focusrite Saffire Pro 40 (TCD2220)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210601081753.9191-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
NOTIFY_CLOCK_ACCEPTED notification is always generated as a result of
GLOBAL_CLOCK_SELECT operation, however NOTIFY_LOCK_CHG notification
doesn't, as long as the selected clock is already configured. In the case,
ALSA dice driver waits so long. It's inconvenient for some devices to lock
to the sequence of value in syt field of CIP header in rx packets.
This commit wait just for NOTIFY_CLOCK_ACCEPTED notification by reverting
changes partially done by two commits below:
* commit fbeac84dbe ("ALSA: dice: old firmware optimization for Dice notification")
* commit aec045b80d ("ALSA: dice: change notification mask to detect lock status change")
I note that the successful lock to the sequence of value in syt field of
CIP header in rx packets results in NOTIFY_EXT_STATUS notification, then
EXT_STATUS_ARX1_LOCKED bit stands in GLOBAL_EXTENDED_STATUS register.
The notification can occur enough after receiving the batch of rx packets.
When the sequence doesn't include value in syt field of CIP header in rx
packets adequate to the device, the notification occurs again and the bit
is off.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210601081753.9191-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Models in below series start transmission of packet after receiving the
sequence of packets:
* Digidesign Digi00x family
* RME Fireface series
Additionally, models in Tascam FireWire series start multiplexing PCM
frames into packets enough after receiving packets. It's required to
transfer packets on-the-fly for the above models according to nominal
sampling transfer frequency before starting sequence replay.
This commit allows drivers to decide whether the engine transfers packet
on-the-fly or not.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210527122611.173711-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In design of audio and music unit in IEEE 1394 bus, feedback of
effective sampling transfer frequency (STF) is delivered by packets
transferred from device. The devices supported by ALSA firewire stack
are categorized to three groups regarding to it.
* Group 1:
* Echo Audio Fireworks board module
* Oxford Semiconductor OXFW971 ASIC
* Digidesign Digi00x family
* Tascam FireWire series
* RME Fireface series
* Group 2:
* BridgeCo. DM1000/DM1100/DM1500 ASICs for BeBoB solution
* TC Applied Technologies DICE ASICs
* Group 3:
* Mark of the Unicord FireWire series
In group 1, the effective STF is determined by the sequence of the number
of events per packet. In group 2, the sequence of presentation timestamp
expressed in syt field of CIP header is interpreted as well. In group 3,
the presentation timestamp is expressed in source packet header (SPH) of
each data block.
I note that some models doesn't take care of effective STF with large
internal buffer. It's reasonable to name it as group 0:
* Group 0
* Oxford Semiconductor OXFW970 ASIC
The effective STF is known to be slightly different from nominal STF for
all of devices, and to be different between the devices. Furthermore, the
effective STF is known to be shifted for long-period transmission. This
makes it hard for software to satisfy the effective STF when processing
packets to the device.
The effective STF is deterministic as a result of analyzing the batch of
packet transferred from the device. For the analysis, caching the sequence
of parameter in the packet is required.
This commit adds an option so that AMDTP domain structure takes AMDTP
stream structure to cache the sequence of parameters in packet transferred
from the device. The parameters are offset ticks of syt field against the
cycle to receive the packet and the number of data blocks per packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210527122611.173711-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When starting AMDTP domain, tasks in process context yields running CPU
till all of isochronous context get callback, with an assumption that
it's OK to process content of packet.
However several isochronous cycles are skipped to transfer rx packets, or
the content of rx packets are dropped, to manage the timing to start
processing the packets.
This commit changes the timing for tasks in process context to wake up
when processing content of packet is actually ready.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.
Cc: <stable@vger.kernel.org>
Fixes: f1f0f330b1 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA dice driver detects jumbo payload at high sampling transfer frequency
for below models:
* Avid M-Box 3 Pro
* M-Audio Profire 610
* M-Audio Profire 2626
Although many DICE-based devices have a quirk at high sampling transfer
frequency to multiplex double number of PCM frames into data block than
the number in IEC 61883-1/6, the above devices are just compliant to
IEC 61883-1/6.
This commit disables the mode of double_pcm_frames for the models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012510.37126-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.
This commit fixes hardcoded stream formats.
Cc: <stable@vger.kernel.org>
Fixes: 28b208f600 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When node is removed from IEEE 1394 bus, any transaction fails to the node.
In the case, ALSA dice driver doesn't stop isochronous contexts even if
they are running. As a result, null pointer dereference occurs in callback
from the running context.
This commit fixes the bug to release isochronous contexts always.
Cc: <stable@vger.kernel.org> # v5.4 or later
Fixes: e9f21129b8 ("ALSA: dice: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210312093407.23437-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
strlcpy is deprecated. see: Documentation/process/deprecated.rst
Change the calls that do not use the strlcpy return value to the
preferred strscpy.
Done with cocci script:
@@
expression e1, e2, e3;
@@
- strlcpy(
+ strscpy(
e1, e2, e3);
This cocci script leaves the instances where the return value is
used unchanged.
After this patch, sound/ has 3 uses of strlcpy() that need to be
manually inspected for conversion and changed one day.
$ git grep -w strlcpy sound/
sound/usb/card.c: len = strlcpy(card->longname, s, sizeof(card->longname));
sound/usb/mixer.c: return strlcpy(buf, p->name, buflen);
sound/usb/mixer.c: return strlcpy(buf, p->names[index], buflen);
Miscellenea:
o Remove trailing whitespace in conversion of sound/core/hwdep.c
Link: https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/22b393d1790bb268769d0bab7bacf0866dcb0c14.camel@perches.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA dice driver expects devices to multiplex MIDI messages into first
port of isochronous communication. Actually devices perform for it.
However, check of stream format is invalid for second port of isochronous
communication. As a result, when the device supports two ports for
isochronous communication and the stream format is hard-coded, ALSA
dice driver fails to start packet streaming.
This commit loosens stream format check for MIDI conformant data channel.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At failure of attempt to detect protocol extension, ALSA dice driver
should be fallback to limited functionality. However it's not.
This commit fixes it.
Cc: <stable@vger.kernel.org> # v4.18+
Fixes: 58579c056c ("ALSA: dice: use extended protocol to detect available stream formats")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All the PCM ioctl ops of ALSA FireWire drivers do nothing but calling
the default handler.
Now PCM core accepts NULL as the default ioctl ops(*), so let's drop
altogether.
(*) commit fc033cbf6f ("ALSA: pcm: Allow NULL ioctl ops")
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191210061145.24641-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clean up the drivers with the new managed buffer allocation API.
The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped.
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191209192422.23902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
default mmap handler
Link: https://lore.kernel.org/r/20191105151856.10785-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices have a quirk to postpone transmission of isoc packet for
several dozen or hundred isoc cycles since configured to transmit.
Furthermore, some devices have a quirk to transmit isoc packet with
discontinued data of its header.
In 1394 OHCI specification, software allows to start isoc context with
certain isoc cycle. Linux firewire subsystem has kernel API to use it
as well.
This commit uses the functionality of 1394 OHCI controller to handle
the quirks. At present, this feature is convenient to ALSA bebob and
fireface driver. As a result, some devices can be safely handled, as
long as I know:
- MAudio FireWire solo
- MAudio ProFire Lightbridge
- MAudio FireWire 410
- Roland FA-66
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An isoc context for AMDTP stream is flushed to queue packet
by a call of pcm.ack. This commit extends this for AMDTP
domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An isoc context for AMDTP stream is flushed to queue packet
by a call of pcm.pointer. This commit extends this for AMDTP
domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit allows ALSA dice driver to share PCM buffer size for both
capture and playback PCM substream. When AMDTP domain starts for one
of the PCM substream, buffer size of the PCM substream is stores to
AMDTP domain structure. Some AMDTP streams have already run with the
buffer size when another PCM substream starts, therefore the PCM
substream has a constraint to its buffer size.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The number of packets in packet buffer has been fixed number (=48) since
first commit of ALSA IEC 61883-1/6 packet streaming engine.
This commit allows the engine to use variable number of packets in the
buffer. The size is calculated by a parameter in AMDTP domain structure
surely to store the number of events in the packets of buffer. Although
the value of parameter is expected to come from 'period size' parameter
of PCM substream, at present 48 is still used.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191017155424.885-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Dice hardware has a quirk called as 'Dual Wire'. For a case of higher
sampling transmission frequency, this commit performs calculations between
the number of PCM frames and the number of events in AMDTP stream.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data
channels per data block in CIP.
Both iO14 and iO26 have the same contents in their configuration ROM.
For this reason, ALSA Dice driver attempts to distinguish them according
to the value of TX0_AUDIO register at probe callback. Although the way is
valid at lower and middle sampling rate, it's lastly invalid at higher
sampling rate because because the two models returns the same value for
read transaction to the register.
In the most cases, users just plug-in the device and ALSA dice driver
detects it. In the case, the device runs at lower sampling rate and
the driver detects expectedly. For this reason, this commit leaves the
way to detect as is.
Fixes: 28b208f600 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When introducing AMDTP domain to ALSA dice driver, error path does not
handle error correctly. This commit fixes the bug.
Fixes: e9f21129b8 ("ALSA: dice: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.
ALSA dice driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.
This commit fixes the bug.
Fixes: 3cd2c2d780 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit fixes the warning due to returning uninitialized value
from start_streams() helper function.
sound/firewire/dice/dice-stream.c: In function 'start_streams.isra.0':
>> sound/firewire/dice/dice-stream.c:350:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
int err;
^~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 3cd2c2d780 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit adds a helper function to allocate isochronous resources,
separated from operations to start packet streaming, I note that some
dice-based devices have two pair of endpoints for isochronous packet
straeming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
There're three points to finish packet streaming but no helper
functions for common operations for it. This commit adds a helper
function for operations to finish packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
licensed under the terms of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 88 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.521539229@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The calls of snd_info_register() are superfluous and should be avoided
at the procfs creation time. They are called at the end of the whole
initialization via snd_card_register(). This patch drops such
superfluous calls.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Duende Classic was produced by Solid State Logic in 2006, as a
first model of Duende DSP series. The following model, Duende Mini
was produced in 2008. They are designed to receive isochronous
packets for PCM frames via IEEE 1394 bus, perform signal processing by
downloaded program, then transfer isochronous packets for converted
PCM frames.
These two models includes the same embedded board, consists of several
ICs below:
- Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus
- WaveFront semiconductor, DICE II STD ASIC for link/protocol layer
- Altera MAX 3000A CPLD for programs
- Analog devices, SHARC ADSP-21363 for signal processing (4 chips)
This commit adds support for the two models to ALSA dice driver. Like
support for the other devices, packet streaming is just available.
Userspace applications should be developed if full features became
available; e.g. program uploader and parameter controller.
$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
'bmc': False,
'chip_ID': 349771402425,
'cmc': True,
'cyc_clk_acc': 255,
'generation': 1,
'imc': True,
'isc': True,
'link_spd': 2,
'max_ROM': 1,
'max_rec': 512,
'name': '1394',
'node_vendor_ID': 20674,
'pmc': False},
'root-directory': [ ['VENDOR', 20674],
['DESCRIPTOR', 'Solid State Logic'],
['MODEL', 112],
['DESCRIPTOR', 'Duende board'],
[ 'NODE_CAPABILITIES',
{ 'addressing': {'64': True, 'fix': True, 'prv': True},
'misc': {'int': False, 'ms': False, 'spt': True},
'state': { 'atn': False,
'ded': False,
'drq': True,
'elo': False,
'init': False,
'lst': True,
'off': False},
'testing': {'bas': False, 'ext': False}}],
[ 'UNIT',
[ ['SPECIFIER_ID', 20674],
['VERSION', 1],
['MODEL', 112],
['DESCRIPTOR', 'Duende board']]]]}
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a development period for Linux kernel v4.20, drivers in ALSA firewire
stack were changed to wait for releases of all ALSA character devices at
.remove callback of bus driver. However, ALSA dice driver is partly out
of this change. This bug can bring fault to user process which holds
the last of character device in unplugging.
This commit fixes the driver to wait in the callback.
Fixes: 61ccc6f6b2 ('ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, .private_free callback releases resources just for
data transmission. This release function can be called without the
resources are actually allocated in error paths.
This commit applies a small refactoring to clean up codes in error
paths.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a previous commit, drivers in ALSA firewire stack blocks .remove
callback of bus driver. This enables to release members of private
data in the callback after releasing device of sound card.
This commit simplifies codes to release the members.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, private data of each driver in ALSA firewire stack is
allocated/freed by kernel slab allocator for corresponding unit on
IEEE 1394 bus. In this case, resource-managed slab allocator is
available to release memory object automatically just before releasing
device structure for the unit. This idea can prevent runtime from
memory leak due to programming mistakes.
This commit uses the allocator for the private data. These drivers
already use reference counter to maintain lifetime of device structure
for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data
is safely released in a callback of 'struct snd_card.private_free().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A commit 28b208f600 ('ALSA: dice: add parameters of stream formats for
models produced by Alesis') adds wrong copy to rx parameters instead of
tx parameters for Alesis iO26.
This commit fixes the bug for v4.18-rc8.
Fixes: 28b208f600 ('ALSA: dice: add parameters of stream formats for models produced by Alesis')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v4.18
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with
somewhat special for vmalloc handling, but in the end, this turned to
just the default handler, i.e. NULL. As the situation has never
changed over decades, let's rip it off.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto