ASSERT_RTNL() macro is actual open-coded variant of WARN_ONCE() with
two exceptions. First, it prints stack for multiple hits and not only
once as WARN_ONCE() does. Second, the user can disable prints of
WARN_ONCE by setting CONFIG_BUG to N.
The multiple prints of dump stack are actually not needed, because calls
without rtnl lock are programming errors and user can't do anything
about them except to complain to the mailing list after first occurrence
of such failure.
The user who disabled BUG/WARN prints did it explicitly because by default
in upstream kernel and distributions this option is enabled. It means
that user doesn't want to see prints about missing locks too.
This patch replaces open-coded variant in favor of already existing
macro and change error prints to be once only.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove superfluous pin setup to get out of accessing invalid I/O pin
registers because the way for pin configuring tends to be different from
various SoCs and thus it should be better being managed and controlled by
the pinctrl driver which MT7622 already can support.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The property "mediatek,pctl" is only required for SoCs such as MT2701 and
MT7623, so adding a few words for stating the condition.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit cc2b14d510 ("bpf: teach verifier to recognize zero initialized
stack") introduced a very relaxed check when comparing stacks of different
states, effectively returning a positive result in many cases where it
shouldn't.
This can create problems in cases such as this following C pseudocode:
long var;
long *x = bpf_map_lookup(...);
if (!x)
return;
if (*x != 0xbeef)
var = 0;
else
var = 1;
/* This is the key part, calling a helper causes an explored state
* to be saved with the information that "var" is on the stack as
* STACK_ZERO, since the helper is first met by the verifier after
* the "var = 0" assignment. This state will however be wrongly used
* also for the "var = 1" case, so the verifier assumes "var" is always
* 0 and will replace the NULL assignment with nops, because the
* search pruning prevents it from exploring the faulty branch.
*/
bpf_ktime_get_ns();
if (var)
*(long *)0 = 0xbeef;
Fix the issue by making sure that the stack is fully explored before
returning a positive comparison result.
Also attach a couple tests that highlight the bad behavior. In the first
test, without this fix instructions 16 and 17 are replaced with nops
instead of being rejected by the verifier.
The second test, instead, allows a program to make a potentially illegal
read from the stack.
Fixes: cc2b14d510 ("bpf: teach verifier to recognize zero initialized stack")
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Modelled strongly upon the arm64 implementation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Lots of overlapping changes. Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.
Include a necessary change by Jakub Kicinski, with log message:
====================
cls_bpf no longer takes care of offload tracking. Make sure
netdevsim performs necessary checks. This fixes a warning
caused by TC trying to remove a filter it has not added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple of stats that aren't in the documentation file
and rework the top description to be a little more readable.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull networking fixes from David Miller"
"What's a holiday weekend without some networking bug fixes? [1]
1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function
calls, from Daniel Borkmann.
2) Fix regression from errata limiting change to marvell PHY driver,
from Zhao Qiang.
3) Fix u16 overflow in SCTP, from Xin Long.
4) Fix potential memory leak during bridge newlink, from Nikolay
Aleksandrov.
5) Fix BPF selftest build on s390, from Hendrik Brueckner.
6) Don't append to cfg80211 automatically generated certs file,
always write new ones from scratch. From Thierry Reding.
7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai.
8) Fix hang on tg3 MTU change with certain chips, from Brian King.
9) Add stall detection to arc emac driver and reset chip when this
happens, from Alexander Kochetkov.
10) Fix MTU limitng in GRE tunnel drivers, from Xin Long.
11) Fix stmmac timestamping bug due to mis-shifting of field. From
Fredrik Hallenberg.
12) Fix metrics match when deleting an ipv4 route. The kernel sets
some internal metrics bits which the user isn't going to set when
it makes the delete request. From Phil Sutter.
13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix
from Yelena Krivosheev.
14) Fix double free and memory corruption in get_net_ns_by_id, from
Eric W. Biederman.
15) Flush ipv4 FIB tables in the reverse order. Some tables can share
their actual backing data, in particular this happens for the MAIN
and LOCAL tables. We have to kill the LOCAL table first, because
it uses MAIN's backing memory. Fix from Ido Schimmel.
16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann
Horn, and Alexei Starovoitov.
17) Make changes to ipv6 autoflowlabel sysctl really propagate to
sockets, unless the socket has set the per-socket value
explicitly. From Shaohua Li.
18) Fix leaks and double callback invocations of zerocopy SKBs, from
Willem de Bruijn"
[1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
skbuff: skb_copy_ubufs must release uarg even without user frags
skbuff: orphan frags before zerocopy clone
net: reevalulate autoflowlabel setting after sysctl setting
openvswitch: Fix pop_vlan action for double tagged frames
ipv6: Honor specified parameters in fibmatch lookup
bpf: do not allow root to mangle valid pointers
selftests/bpf: add tests for recent bugfixes
bpf: fix integer overflows
bpf: don't prune branches when a scalar is replaced with a pointer
bpf: force strict alignment checks for stack pointers
bpf: fix missing error return in check_stack_boundary()
bpf: fix 32-bit ALU op verification
bpf: fix incorrect tracking of register size truncation
bpf: fix incorrect sign extension in check_alu_op()
bpf/verifier: fix bounds calculation on BPF_RSH
ipv4: Fix use-after-free when flushing FIB tables
s390/qeth: fix error handling in checksum cmd callback
tipc: remove joining group member from congested list
selftests: net: Adding config fragment CONFIG_NUMA=y
nfp: bpf: keep track of the offloaded program
...
Sven Eckelmann says:
====================
flow_dissector: Provide basic batman-adv unicast handling
we are currently starting to use batman-adv as mesh protocol on multicore
embedded devices. These usually don't have a lot of CPU power per core but
are reasonable fast when using multiple cores.
It was noticed that sending was working very well but receiving was
basically only using on CPU core per neighbor. The reason for that is
format of the (normal) incoming packet:
+--------------------+
| ip(v6)hdr |
+--------------------+
| inner ethhdr |
+--------------------+
| batadv unicast hdr |
+--------------------+
| outer ethhdr |
+--------------------+
The flow dissector will therefore stop after parsing the outer ethernet
header and will not parse the actual ipv(4|6)/... header of the packet. Our
assumption was now that it would help us to add minimal support to the flow
dissector to jump over the batman-adv unicast and inner ethernet header
(like in gre ETH_P_TEB). The patch was implemented in a slightly hacky
way [1] and the results looked quite promising.
I didn't get any feedback how the files should actually be named. So I am
now just using the names from RFC v3
The discussion of the RFC v3 can be found in the related patches of
https://patchwork.ozlabs.org/cover/849345/
The discussion of the RFC v2 can be found in the related patches of
https://patchwork.ozlabs.org/cover/844783/
Changes in v4:
==============
* added patch to change the u8/u16 to __u8/__u16 in
include/uapi/linux/batadv_packet.h
- requested by Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Changes in v3:
==============
* removed change of uapi/linux/batman_adv.h to uapi/linux/batadv_genl.h
- requested by Willem de Bruijn <willemdebruijn.kernel@gmail.com>
* removed naming fixes for enums/defines in uapi/linux/batadv_genl.h
- requested by Willem de Bruijn <willemdebruijn.kernel@gmail.com>
* renamed uapi/linux/batadv.h to uapi/linux/batadv_packet.h
* moved batadv dissector functionality in own function
- requested by Tom Herbert <tom@herbertland.com>
* added support for flags FLOW_DISSECTOR_F_STOP_AT_ENCAP and
FLOW_DIS_ENCAPSULATION
- requested by Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Changes in v2:
==============
* removed the batman-adv unicast packet header definition from flow_dissector.c
* moved the batman-adv packet.h/uapi headers around to provide the correct
definitions to flow_dissector.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The batman-adv unicast packets contain a full layer 2 frame in encapsulated
form. The flow dissector must therefore be able to parse the batman-adv
unicast header to reach the layer 2+3 information.
+--------------------+
| ip(v6)hdr |
+--------------------+
| inner ethhdr |
+--------------------+
| batadv unicast hdr |
+--------------------+
| outer ethhdr |
+--------------------+
The obtained information from the upper layer can then be used by RPS to
schedule the processing on separate cores. This allows better distribution
of multiple flows from the same neighbor to different cores.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The header file is used by different userspace programs to inject packets
or to decode sniffed packets. It should therefore be available to them as
userspace header.
Also other components in the kernel (like the flow dissector) require
access to the packet definitions to be able to decode ETH_P_BATMAN ethernet
packets.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The uapi headers use the __u8/__u16/... version of the fixed width types
instead of u8/u16/... The use of the latter must be avoided before
packet.h is copied to include/uapi/linux/.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BIT(x) macro is no longer available for uapi headers because it is
defined outside of it (linux/bitops.h). The use of it must therefore be
avoided and replaced by an appropriate other representation.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The headers used by packet.h should also be included by it directly. main.h
is currently dealing with it in batman-adv, but this will no longer work
when this header is moved to include/uapi/linux/.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward says:
====================
sfc: support extra stats on Medford2
X2000-series NICs add port stats for two new features: FEC (Forward Error
Correction, used on 25G links) and CTPIO (cut-through programmed I/O).
This patch series adds support for reporting both of these sets of stats
v2: add additional Signed-off-by
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While the Linux driver doesn't use CTPIO ('cut-through programmed I/O'),
other drivers on the same port might, so if we're responsible for
reporting per-port stats we need to include the CTPIO stats.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no explicit capability bit, so we just condition them on having
efx->num_mac_stats >= MC_CMD_MAC_NSTATS_V2.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Medford2 NICs support more than MC_CMD_MAC_NSTATS stats, and report the new
count in a field of MC_CMD_GET_CAPABILITIES_V4. This also means that the
end generation count moves (it is, as before, the last 64 bits of the DMA
buffer, but that is no longer MC_CMD_MAC_GENERATION_END).
So read num_mac_stats from the GET_CAPABILITIES response, if present;
otherwise assume MC_CMD_MAC_NSTATS; and always use num_mac_stats - 1 rather
than MC_CMD_MAC_GENERATION_END.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device id's 0x50ac, 0x6087 for T5 and T6 cards
respectively.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get rid of custom hex_dump_to_buffer().
The output is slightly changed, i.e. each byte followed by white space.
Note, we don't use print_hex_dump() here since the original code uses
nedev_dbg().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Attaching more than one PHY to phylink is bad news, as we store a
pointer to the PHY in a single location. Error out if more than one
PHY is attempted to be attached.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
===================
Mellanox, mlx5 fixes 2017-12-19
The follwoing series includes some fixes for mlx5 core and etherent
driver.
Please pull and let me know if there is any problem.
This series doesn't introduce any conflict with the ongoing mlx5 for-next
submission.
For -stable:
kernels >= v4.7.y
("net/mlx5e: Fix possible deadlock of VXLAN lock")
("net/mlx5e: Add refcount to VXLAN structure")
("net/mlx5e: Prevent possible races in VXLAN control flow")
("net/mlx5e: Fix features check of IPv6 traffic")
kernels >= v4.9.y
("net/mlx5: Fix error flow in CREATE_QP command")
("net/mlx5: Fix rate limit packet pacing naming and struct")
kernels >= v4.13.y
("net/mlx5: FPGA, return -EINVAL if size is zero")
kernels >= v4.14.y
("Revert "mlx5: move affinity hints assignments to generic code")
All above patches apply and compile with no issues on corresponding -stable.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_copy_ubufs creates a private copy of frags[] to release its hold
on user frags, then calls uarg->callback to notify the owner.
Call uarg->callback even when no frags exist. This edge case can
happen when zerocopy_sg_from_iter finds enough room in skb_headlen
to copy all the data.
Fixes: 3ece782693 ("sock: skb_copy_ubufs support for compound pages")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate
calls to skb_uarg(skb)->callback for the same data.
skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb
with each segment. This is only safe for uargs that do refcounting,
which is those that pass skb_orphan_frags without dropping their
shared frags. For others, skb_orphan_frags drops the user frags and
sets the uarg to NULL, after which sock_zerocopy_clone has no effect.
Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback
calls for the same data causing the vhost_net_ubuf_ref_>refcount to
drop below zero.
Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com>
Fixes: 1f8b977ab3 ("sock: enable MSG_ZEROCOPY")
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Reported-by: David Hill <dhill@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block fixes from Jens Axboe:
"It's been a few weeks, so here's a small collection of fixes that
should go into the current series.
This contains:
- NVMe pull request from Christoph, with a few important fixes.
- kyber hang fix from Omar.
- A blk-throttl fix from Shaohua, fixing a case where we double
charge a bio.
- Two call_single_data alignment fixes from me, fixing up some
unfortunate changes that went into 4.14 without being properly
reviewed on the block side (since nobody was CC'ed on the
patch...).
- A bounce buffer fix in two parts, one from me and one from Ming.
- Revert bdi debug error handling patch. It's causing boot issues for
some folks, and a week down the line, we're still no closer to a
fix. Revert this patch for now until it's figured out, then we can
retry for 4.16"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "bdi: add error handle for bdi_debug_register"
null_blk: unalign call_single_data
block: unalign call_single_data in struct request
block-throttle: avoid double charge
block: fix blk_rq_append_bio
block: don't let passthrough IO go into .make_request_fn()
nvme: setup streams after initializing namespace head
nvme: check hw sectors before setting chunk sectors
nvme: call blk_integrity_unregister after queue is cleaned up
nvme-fc: remove double put reference if admin connect fails
nvme: set discard_alignment to zero
kyber: fix another domain token wait queue hang
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJaO6N9AAoJEL/70l94x66DC1wH/Rf+u0Cj6ZQil6LK6Nf8bfPd
3TqrwrxUDeXwi8GzsvK14izBr1mDzidSHIO0Q4XINFRSRdaf43h3R2im/SJqvNhP
xktCmJI2CxN96oaC7kIExgwf3YKhFdLIADfbT8oR9p3xZG/+c97dkr3b4XtmVCDb
ZXdUEOcKnoW4zwpfJN30FLlq4OwYvuYVz02AEfPivZRDfhhus/TYSnuSdxH8CLNf
75ymuKyXoo/RELbimwbMk8Cm9+ey7PjlUGOgbnbXIFtmgznXhLzAOeES2B+46J5b
sMBPlmiJrn6N//lM18CC5yOBzBLGsYOoXggtw4aU/5nM4GVcFebWedpcoD4D8Jw=
=Bt8w
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
tools/kvm_stat: sort '-f help' output
kvm: x86: fix RSM when PCID is non-zero
KVM: Fix stack-out-of-bounds read in write_mmio
KVM: arm/arm64: Fix timer enable flow
KVM: arm/arm64: Properly handle arch-timer IRQs after vtimer_save_state
KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GIC
KVM: arm/arm64: Fix HYP unmapping going off limits
arm64: kvm: Prevent restoring stale PMSCR_EL1 for vcpu
KVM/x86: Check input paging mode when cs.l is set
tools/kvm_stat: add line for totals
tools/kvm_stat: stop ignoring unhandled arguments
tools/kvm_stat: suppress usage information on command line errors
tools/kvm_stat: handle invalid regular expressions
tools/kvm_stat: add hint on '-f help' to man page
tools/kvm_stat: fix child trace events accounting
tools/kvm_stat: fix extra handling of 'help' with fields filter
tools/kvm_stat: fix missing field update after filter change
tools/kvm_stat: fix drilldown in events-by-guests mode
tools/kvm_stat: fix command line option '-g'
kvm: x86: fix WARN due to uninitialized guest FPU state
...
The RGMII spec allows compliance for devices that implement an internal
delay on TXC and/or RXC inside the transmitter. This patch adds the
necessary RGMII_[RX|TX]ID mode code to handle such PHYs with the
emac driver.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ibm_emac driver predates the PHY_INTERFACE_MODE_*
enums by a few years.
And while the driver has been retrofitted to use the PHYLIB,
the old definitions have stuck around to this day.
This patch replaces all occurences of PHY_MODE_* with
the respective equivalent PHY_INTERFACE_MODE_* enum.
And finally, it purges the old macros for good.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy_modes() in the common phy.h already defines the same phy mode
names in lower case. The deleted rgmii_mode_name() is used only
in one place and for a "notice-level" printk. Hence, it will not
be missed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2.
If sockopt doesn't set autoflowlabel, outcome packets from the hosts are
supposed to not include flowlabel. This is true for normal packet, but
not for reset packet.
The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if
we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't
changed, so the sock will keep the old behavior in terms of auto
flowlabel. Reset packet is suffering from this problem, because reset
packet is sent from a special control socket, which is created at boot
time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control
socket will always have its ipv6_pinfo.autoflowlabel set, even after
user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always
have flowlabel. Normal sock created before sysctl setting suffers from
the same issue. We can't even turn off autoflowlabel unless we kill all
socks in the hosts.
To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the
autoflowlabel setting from user, otherwise we always call
ip6_default_np_autolabel() which has the new settings of sysctl.
Note, this changes behavior a little bit. Before commit 42240901f7
(ipv6: Implement different admin modes for automatic flow labels), the
autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes,
existing connection will change autoflowlabel behavior. After that
commit, autoflowlabel behavior is sticky in the whole life of the sock.
With this patch, the behavior isn't sticky again.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_vlan_pop() expects skb->protocol to be a valid TPID for double
tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop()
shift the true ethertype into position for us.
Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets")
Signed-off-by: Eric Garver <e@erig.me>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring says:
====================
net: sched: sch: introduce extack support
this patch series basically add support for extack in common qdisc handling.
Additional it adds extack pointer to common qdisc callback handling this
offers per qdisc implementation to setting the extack message for each
failure over netlink.
The extack message will be set deeper in qdisc functions but going not
deeper as net core api. For qdisc module callback handling, the extack
will not be set. This will be part of per qdisc extack handling.
I also want to prepare patches to handle extack per qdisc module...
so there will come a lot of more patches, just cut them down to make
it reviewable.
There are some above 80-chars width warnings, which I ignore because
it looks more ugly otherwise.
This patch-series based on patches by David Ahern which gave me some
hints how to deal with extack support.
Cc: David Ahern <dsahern@gmail.com>
changes since v4:
- rebase on current net-next/master
- fix several typos (also David Ahren to Ahern, I am sorry)
- Add acked by Jamal
changes since v3:
- remove patch 2/2 lib: nlattr: set extack msg if validate_nla fails since
David Ahern has a better solution
- Remove check on net admin permission since -EPERM indicates it already
- Change rtab to "rate table" - this is what it's stands for
- Fix cbs *not* support messages
- Fix tcf block error message for allocation, allocation will be still there
because there are multiple places which returns -ENOMEM
- Finnally also took care about sch_atm, sorry somehow I forgot this one and
I hope I didn't forgot any sch implementation to add new callback parameters
changes since v2:
- add fix coding style patch to catch all checkpatch warnings
- add patch for setting netlink extack msg if validate_nla fails
- changes in handle generic qdisc errors
- remove NL_SET_ERR_MSG from memory allocation errors
- remove NL_SET_ERR_MSG from device not found
- change STAB to table size
- add various new patches to add extack support for common
TC functions like qdisc_get_rtab, tcf_block_get, qdisc_alloc
and qdisc_create_dflt - users which are interessted in the
detailed error messages can assign extack, otherwise NULL.
- Add sch_cbq as example for qdisc_ops callback: init,
qdisc_class_ops callbacks: change and graft
- Add sch_cbs as example for qdisc_ops callback: change
- Add sch_drr as example for qdisc_class ops callbacks: tcf_block
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the drr qdisc implementation by
adding NL_SET_ERR_MSG in validation of user input.
Also it serves to illustrate a use case of how the infrastructure ops
api changes are to be used by individual qdiscs.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the cbs qdisc implementation by
adding NL_SET_ERR_MSG in validation of user input.
Also it serves to illustrate a use case of how the infrastructure ops
api changes are to be used by individual qdiscs.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the cbq qdisc implementation by
adding NL_SET_ERR_MSG in validation of user input.
Also it serves to illustrate a use case of how the infrastructure ops
api changes are to be used by individual qdiscs.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the function qdisc_create_dflt which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why qdisc_create_dflt failed. The function qdisc_create_dflt
will also call an init callback which can fail by any per-qdisc specific
handling.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the function qdisc_alloc which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why qdisc_alloc failed.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the function tcf_block_get which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why tcf_block_get failed.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the function qdisc_get_rtab which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why qdisc_get_rtab failed.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for graft callback to prepare per-qdisc
specific changes for extack.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for block callback to prepare per-qdisc
specific changes for extack.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for class change callback api. This prepares
to handle extack support inside each specific class implementation.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for change callback for qdisc ops
structtur to prepare per-qdisc specific changes for extack.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for init callback to prepare per-qdisc
specific changes for extack.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for generic qdisc handling. The extack
will be set deeper to each called function which is not part of netdev
core api.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fix checkpatch issues for upcomming patches according to the
sched api file. It changes mostly how to check on null pointer.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit a0747a859e.
It breaks some booting for some users, and more than a week
into this, there's still no good fix. Revert this commit
for now until a solution has been found.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, parameters such as oif and source address are not taken into
account during fibmatch lookup. Example (IPv4 for reference) before
patch:
$ ip -4 route show
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1
$ ip -6 route show
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium
fe80::/64 dev dummy0 proto kernel metric 256 pref medium
fe80::/64 dev dummy1 proto kernel metric 256 pref medium
$ ip -4 route get fibmatch 192.0.2.2 oif dummy0
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
$ ip -4 route get fibmatch 192.0.2.2 oif dummy1
RTNETLINK answers: No route to host
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
After:
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
RTNETLINK answers: Network is unreachable
The problem stems from the fact that the necessary route lookup flags
are not set based on these parameters.
Instead of duplicating the same logic for fibmatch, we can simply
resolve the original route from its copy and dump it instead.
Fixes: 18c3a61c42 ("net: ipv6: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sort the fields returned by specifying '-f help' on the command line.
While at it, simplify the code a bit, indent the output and eliminate an
extra blank line at the beginning.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leon Romanovsky