Commit Graph

12 Commits

Author SHA1 Message Date
Xin Long 9bfab6d23a netfilter: set default timeout to 3 secs for sctp shutdown send and recv state
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.

As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.

Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:

  net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
  net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0

This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.

Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.

Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-16 00:05:15 +02:00
Sriram Yagnaraman a44b765148 netfilter: conntrack: unify established states for SCTP paths
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.

By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.

With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.

Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-01-24 09:52:52 +01:00
Sriram Yagnaraman f9645abe42 netfilter: conntrack: document sctp timeouts
Exposed through sysctl, update documentation to describe sctp states and
their default timeouts.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-12-13 12:25:45 +01:00
Pablo Neira Ayuso 76b907ee00 netfilter: conntrack: remove nf_conntrack_helper documentation
This toggle has been already remove by b118509076 ("netfilter: remove
nf_conntrack_helper sysctl and modparam toggles").

Remove the documentation entry for this toggle too.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-20 23:50:03 +02:00
Florian Westphal 90d1daa458 netfilter: conntrack: add nf_conntrack_events autodetect mode
This adds the new nf_conntrack_events=2 mode and makes it the
default.

This leverages the earlier flag in struct net to allow to avoid
the event extension as long as no event listener is active in
the namespace.

This avoids, for most cases, allocation of ct->ext area.
A followup patch will take further advantage of this by avoiding
calls down into the event framework if the extension isn't present.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-05-13 18:56:28 +02:00
Jakub Kicinski 10905b4a68 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Protect nft_ct template with global mutex, from Pavel Skripkin.

2) Two recent commits switched inet rt and nexthop exception hashes
   from jhash to siphash. If those two spots are problematic then
   conntrack is affected as well, so switch voer to siphash too.
   While at it, add a hard upper limit on chain lengths and reject
   insertion if this is hit. Patches from Florian Westphal.

3) Fix use-after-scope in nf_socket_ipv6 reported by KASAN,
   from Benjamin Hesmans.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: socket: icmp6: fix use-after-scope
  netfilter: refuse insertion if chain has grown too large
  netfilter: conntrack: switch to siphash
  netfilter: conntrack: sanitize table size default settings
  netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
====================

Link: https://lore.kernel.org/r/20210903163020.13741-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-03 16:20:37 -07:00
Florian Westphal d532bcd0b2 netfilter: conntrack: sanitize table size default settings
conntrack has two distinct table size settings:
nf_conntrack_max and nf_conntrack_buckets.

The former limits how many conntrack objects are allowed to exist
in each namespace.

The second sets the size of the hashtable.

As all entries are inserted twice (once for original direction, once for
reply), there should be at least twice as many buckets in the table than
the maximum number of conntrack objects that can exist at the same time.

Change the default multiplier to 1 and increase the chosen bucket sizes.
This results in the same nf_conntrack_max settings as before but reduces
the average bucket list length.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-30 11:49:54 +02:00
Ryoga Saito 7a3f5b0de3 netfilter: add netfilter hooks to SRv6 data plane
This patch introduces netfilter hooks for solving the problem that
conntrack couldn't record both inner flows and outer flows.

This patch also introduces a new sysctl toggle for enabling lightweight
tunnel netfilter hooks.

Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-30 01:51:36 +02:00
Florian Westphal 4592ee7f52 netfilter: conntrack: remove offload_pickup sysctl again
These two sysctls were added because the hardcoded defaults (2 minutes,
tcp, 30 seconds, udp) turned out to be too low for some setups.

They appeared in 5.14-rc1 so it should be fine to remove it again.

Marcelo convinced me that there should be no difference between a flow
that was offloaded vs. a flow that was not wrt. timeout handling.
Thus the default is changed to those for TCP established and UDP stream,
5 days and 120 seconds, respectively.

Marcelo also suggested to account for the timeout value used for the
offloading, this avoids increase beyond the value in the conntrack-sysctl
and will also instantly expire the conntrack entry with altered sysctls.

Example:
   nf_conntrack_udp_timeout_stream=60
   nf_flowtable_udp_timeout=60

This will remove offloaded udp flows after one minute, rather than two.

An earlier version of this patch also cleared the ASSURED bit to
allow nf_conntrack to evict the entry via early_drop (i.e., table full).
However, it looks like we can safely assume that connection timed out
via HW is still in established state, so this isn't needed.

Quoting Oz:
 [..] the hardware sends all packets with a set FIN flags to sw.
 [..] Connections that are aged in hardware are expected to be in the
 established state.

In case it turns out that back-to-sw-path transition can occur for
'dodgy' connections too (e.g., one side disappeared while software-path
would have been in RETRANS timeout), we can adjust this later.

Cc: Oz Shlomo <ozsh@nvidia.com>
Cc: Paul Blakey <paulb@nvidia.com>
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-06 17:07:41 +02:00
Ali Abdallah 1da4cd82dd netfilter: conntrack: add new sysctl to disable RST check
This patch adds a new sysctl tcp_ignore_invalid_rst to disable marking
out of segments RSTs as INVALID.

Signed-off-by: Ali Abdallah <aabdallah@suse.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-06 14:15:12 +02:00
Oz Shlomo 3078d964c0 docs: networking: Update connection tracking offload sysctl parameters
Document the following connection offload configuration parameters:
- nf_flowtable_tcp_timeout
- nf_flowtable_tcp_pickup
- nf_flowtable_udp_timeout
- nf_flowtable_udp_pickup

Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-19 00:00:17 +02:00
Mauro Carvalho Chehab 13df433f8c docs: networking: convert nf_conntrack-sysctl.txt to ReST
- add SPDX header;
- add a document title;
- mark lists as such;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30 12:56:36 -07:00