Some camera systems cannot operate mt9v022 in normal mode and use
only the snapshot mode. The TechNote for mt9v022 (TN0960) and mt9v024
(TN-09-225) describes required register settings when configuring the
snapshot operation. The snapshot mode requires that certain automatic
functions of the image sensor should be disabled or set to fixed values.
According to the TechNote bit 2 and bit 9 in the register 0x20 must be
set in snapshot mode and unset for normal operation. This applies for
mt9v022 Rev.3 and mt9v024. Add required reg. 0x20 settings dependent on
sensor chip version.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add controls for horizontal and vertical blanking. Also add an error
message for case that the control handler init failed. Since setting
the blanking registers is done by controls now, we shouldn't change
these registers outside of the control function. Use v4l2_ctrl_s_ctrl()
to set them.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is the result of experimenting with the SpeedLink VAD Laplace webcam.
The register sequence for V4L2_MBUS_FMT_YUYV8_2X8 has been identified by
analyzing USB-logs of this device running on MS Windows.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Try reading on video device. If the camera bus driver supports reading
we can try it and return the result. Also add a debug line.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The mx1_camera driver has been broken for a few release cycles since
commit 6bd0812 (dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c).
It seems there is no one even compile tested it since then, as doing
so will end up with the following error.
CC drivers/media/platform/soc_camera/mx1_camera.o
In file included from drivers/media/platform/soc_camera/mx1_camera.c:44:0:
arch/arm/mach-imx/include/mach/dma-mx1-mx2.h:8:25: fatal error: mach/dma-v1.h: No such file or directory
It seems there is no one being interested in bringing it back to
work [1] so far. Let's mark it BROKEN.
[1] https://lkml.org/lkml/2012/2/9/171
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Since the MT9V022_TOTAL_SHUTTER_WIDTH register is controlled in manual
mode by V4L2_CID_EXPOSURE control, it shouldn't be written directly in
mt9v022_s_crop(). In manual mode this register should be set to the
V4L2_CID_EXPOSURE control value. Changing this register directly and
outside of the actual control function means that the register value
is not in sync with the corresponding control value. Thus, the following
problem is observed:
- setting this control initially succeeds
- VIDIOC_S_CROP ioctl() overwrites the MT9V022_TOTAL_SHUTTER_WIDTH
register
- setting this control to the same value again doesn't
result in setting the register since the control value
was previously cached and doesn't differ
Remove MT9V022_TOTAL_SHUTTER_WIDTH register setting in mt9v022_s_crop()
and add a comment explaining why it is not needed in manual mode.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add the missing unlock on the error handle path in function
mx2_start_streaming().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in omap1_camera. Fix them by adjusting a function declaration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
.set_crop() implementation in mx1_camera is identical with the default.
Remove the copy to switch to using the default stab.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in mx2_camera. Fix them by cleanly separating writable and
read-only variables in cropping operations.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in mx3_camera. Fix them by cleanly separating writable and
read-only variables in cropping operations.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in pxa_camera.c. Fix them by adjusting a function declaration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in sh_mobile_ceu_camera. Fix them by cleanly separating writable
and read-only variables in cropping operations.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in sh_vou. Fix them by cleanly separating writable and
read-only variables in cropping operations.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The STDI block may measure wrong values, especially for lcvs and lcf. If the
driver can not find any valid timing, the STDI block is restarted to measure
the video timings again. The function will return an error, but the restart of
STDI will generate a new STDI interrupt and the format detection process will
restart.
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use predefined video timings (prim_mode/vid_std) when available as recommended
by Analog Devices (http://ez.analog.com/message/48267#48267).
Also remove 720p30 support since the ADV7604 can't handle that.
(http://ez.analog.com/message/61488#61488)
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This should have break statements in it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Changes the way the primary mode is handled:
- Remove it from platform_data since it doesn't belong there.
- Add a new mode enum for use with s_routing.
- Collapse the two HDMI modes into one HDMI mode: when setting up the
timings manually we do not need to select HDMI_COMP mode. That's only
needed when selecting a preset.
This patch prepares for the next step where we switch to using the presets
where available.
Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The winbond hardware has a counter for leading edges, which increases as
they are received. As we read raw IR from a fifo in an interrupt handler,
we cannot correlate them to specific IR pulses so we simply count all
pulses and edges until we go idle and disable the receiver.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The receiver is never disabled by idle mode since rxstate never gets set
to RXSTATE_ACTIVE, so we keep on getting interrupts after the first IR
activity ends. Note that ir_raw_event_reset() already calls
ir_raw_event_handle().
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The sparse warning is:
"drivers/media/usb/stkwebcam/stk-webcam.c:59:5:
warning: symbol 'first_init' was not declared. Should it be static?"
Declare variable 'first_init' as static and local to the function.
Found by Hans Verkuil's daily build. Tested by compilation only.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As a first step towards migrating davinci platforms to use common clock
framework, replace all instances of clk_enable() with clk_prepare_enable()
and clk_disable() with clk_disable_unprepare().
Also fixes some issues related to clk clean up in the driver
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
set device_caps and also change the driver and
bus_info to proper values as per standard.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Warnings were generated because of the following commit changed data type for
address pointer
195bbca ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors
add __iomem annotation to fix following warnings
drivers/media/platform/davinci/vpbe_osd.c: In function ‘osd_read’:
drivers/media/platform/davinci/vpbe_osd.c:49:2: warning: passing
argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [enabled by default]
arch/arm/include/asm/io.h:104:19: note: expected ‘const volatile
void *’ but argument is of type ‘long unsigned int’
This patch stores the ioremap_nocache() returned address in a
void __iomem * instead of a unsigned long and passes the same to
readl/writel functions which fixes the above warnings.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Update contact information to correspond my e-mail address changes.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently used registers 0xc5 and 0xc7 provide only a very coarse
adjustment possibility within a very small value range (0-3).
With registers 0x01 and 0x03, a fine grained adjustment with
255 steps is possible. This is also what the Windows driver does.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
R,G,B balance registers are 0x01-0x03 instead of 0x02-0x04,
which lead to the wrong conclusion that values are inverted.
Exposure is controlled via page 3 registers and this is already documented.
Also fix a whitespace issue.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Many people are trying to use stk1160 on low memory devices.
Instead of failing if one allocation fails, we allow the driver
to continue working if fewer transfer buffers are available.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Move iommu/iovmm headers from plat/ to platform_data/ as part of the
single zImage work.
Partially based on an earlier version by Ido Yariv <ido@wizery.com>.
Cc: Ido Yariv <ido@wizery.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Looks like the iommu framework does not have generic functions
exported for all the needs yet. The hardware specific functions
are defined in files like intel-iommu.h and amd-iommu.h. Follow
the same standard for omap-iommu.h.
This is needed because we are removing plat and mach includes
for ARM common zImage support. Further work should continue
in the iommu framework context as only pure platform data will
be communicated from arch/arm/*omap*/* code to the iommu
framework.
Cc: Ido Yariv <ido@wizery.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Cc: linux-media@vger.kernel.org
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since mx27 transitioned to the commmon clock framework in 3.5, the correct way
to acquire the csi clock is to get csi_ahb and csi_per clocks separately.
By not doing so the camera sensor does not probe correctly:
soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
mx2-camera mx2-camera.0: Camera driver attached to camera 0
ov2640 0-0030: Product ID error fb:fb
mx2-camera mx2-camera.0: Camera driver detached from camera 0
mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 66500000
Adapt the mx2_camera driver to the new clock framework and make it functional
again.
Tested-by: Gaëtan Carlier <gcembed@gmail.com>
Tested-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Usage of TSTAMP_* macros has gone in 2010 in 730947bc (V4L/DVB: vivi:
clean up and a major overhaul) but the macros remain. Say goodbye to
them.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As reported by Stephen:
After merging the v4l-dvb tree, today's linux-next build (x86_64
allmodconfig) failed like this:
ERROR: "sms_ir_exit" [drivers/media/common/siano/smsmdtv.ko] undefined!
ERROR: "sms_ir_event" [drivers/media/common/siano/smsmdtv.ko] undefined!
ERROR: "sms_ir_init" [drivers/media/common/siano/smsmdtv.ko] undefined!
The smsir file should be part of the smsmdtv core, if RC is defined.
Fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fixes error: dvb_usb_v2: pid_filter() failed=-4
error code -4 is EINTR, Interrupted system call
That error blocks I/O in some cases as -EINTR error was returned
by the mutex which was protecting USB control messages. We want
configure hardware to sleep mode on every case after tuning is
stopped. That kind of behavior blocks it, leaving hardware some
unwanted state in worst case.
That error was seen every time when af9015 was plugged to USB1.1
which leads use of hardware PID filters. Stop tuning (tzap) with
ctrl+c failed as driver tries to remove hardware PID filters.
Tested with every hardware which uses routine in question.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Code block braces were missing which leds broken error logging and compiler warning.
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usb_ctrl_feed':
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:291:12: warning: 'ret' may be used uninitialized in this function [-Wuninitialized]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Milan Tuma <milan.olin@seznam.cz>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As reported by Antti and by Stephen:
drivers/built-in.o: In function `sms_ir_event':
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:48: undefined reference to `ir_raw_event_store'
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:50: undefined reference to `ir_raw_event_handle'
drivers/built-in.o: In function `sms_ir_init':
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:56: undefined reference to `smscore_get_board_id'
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:60: undefined reference to `rc_allocate_device'
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:72: undefined reference to `sms_get_board'
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:92: undefined reference to `sms_get_board'
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:97: undefined reference to `rc_register_device'
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c💯 undefined reference to `rc_free_device'
drivers/built-in.o: In function `sms_ir_exit':
/home/david/checkouts/linux/drivers/media/common/siano/smsir.c:111: undefined reference to `rc_unregister_device'
make: *** [vmlinux] Error 1
Caused by commit fdd1eeb49d "[media] siano: allow compiling it without RC support"
And it happens when CONFIG_SMS_SIANO_RC=y and CONFIG_RC_CORE=m .
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
From Michal Simek:
* 'arm-next' of git://git.xilinx.com/linux-xlnx:
zynq: move static peripheral mappings
zynq: remove use of CLKDEV_LOOKUP
zynq: use pl310 device tree bindings
zynq: use GIC device tree bindings
+ Linux 3.7-rc3
This code should be private to mach-omap2.
The only use for it in for omap1 has been in dmtimer.c
to check for context loss. However, omap1 does not
lose context during idle, so the code is not needed.
Further, omap1 timer has OMAP_TIMER_ALWON set, so omap1
was not hitting omap_pm_get_dev_context_loss_count()
test.
Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The limits are input parameters and should not be modified by the
smiapp_pll_calculate() function. Make them const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OP and VT limits have identical fields, create a shared structure for
both.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support sensors with parallel interface.
Make smiapp_pll.flags also 8-bit so it fits nicely into two 32-bit words
with the other 8-bit fields.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The input values for PLL configuration are mostly static. So set them when
the sensor is registered.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The smiapp pll calculator assumed that the minimum pre-pll divisor was
perfect. That may not always be the case, so let's try the others, too.
Typically there are just a few alternatives.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Two warning messages are missing a trailing newline. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/tuners/xc4000.c: In function ‘check_firmware’:
drivers/media/tuners/xc4000.c:1048:45: warning: ‘fw_minor’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/tuners/xc4000.c:1048:39: warning: ‘fw_major’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/tuners/xc4000.c:1062:39: warning: ‘hw_minor’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/tuners/xc4000.c:1062:33: warning: ‘hw_major’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While it is very unlikely, if the number of parameters for
QAMDemodulatorCommand is not 2 or 4, status become undefined:
/home/hans/work/build/v4l-dvb-git/drivers/media/dvb-frontends/drxk_hard.c: In function ‘QAMDemodulatorCommand’:
/home/hans/work/build/v4l-dvb-git/drivers/media/dvb-frontends/drxk_hard.c:5452:5: warning: ‘status’ may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
See following thread for rationale:
http://www.spinics.net/lists/linux-media/msg52462.html
Tested by compilation only.
Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Usage of BUFFER_TIMEOUT has gone in 2008 in 78718e5d (V4L/DVB (7492):
vivi: Simplify the vivi driver and avoid deadlocks), but the macro
remains. Say goodbye to it.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On some USB controllers when endpoint 3 (used by HID) is not enabled
this causes a USB reset.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
I've got an webcam upside down report for the following system:
System Information
Manufacturer: FUJITSU SIEMENS
Product Name: AMILO Pi 2530
Version:
Serial Number:
UUID: <removed>
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Base Board Information
Manufacturer: FUJITSU SIEMENS
Product Name: F42
Version: 00030D0000000001
Serial Number: <removed>
Currently an entry in the gspca/m5602 quirk table is missing.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Acked-by: Erik Andrén <erik.andren@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
"54fd321 [media] winbond: remove space from driver name" inadvertently
renamed the input device name.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix printk format warning for size_t variable:
drivers/media/i2c/s5k4ecgx.c:346:2: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remember to collect the exit status from 'stk1160_read_reg()' in 'rc'
before testing it for less than zero.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This makes the cleanup on probe failure more consistent with other
drivers. This is similar to what commit
f27b853ea2 ("[media] rc: Fix invalid
free_region and/or free_irq on probe failure") did for some other
drivers.
In addition to making the cleanup more consistent, this also fixes a
case where (on a ene_hw_detect failure) free_region would be called on a
region that was not requested yet.
This last problem was probably introduced by the moving of code in
commit b31b021988 ("[media] ene_ir: Fix
driver initialisation") and commit
9ef449c6b3 ("[media] rc: Postpone ISR
registration").
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/radio/radio-tea5764.c:148:5: warning: no previous prototype for 'tea5764_i2c_read' [-Wmissing-prototypes]
drivers/media/radio/radio-tea5764.c:168:5: warning: no previous prototype for 'tea5764_i2c_write' [-Wmissing-prototypes]
drivers/media/radio/si4713-i2c.c:1772:6: warning: no previous prototype for 'si4713_ioctl' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>
drivers/media/rc/fintek-cir.c:687:5: warning: no previous prototype for 'fintek_init' [-Wmissing-prototypes]
drivers/media/rc/fintek-cir.c:692:6: warning: no previous prototype for 'fintek_exit' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/radio/wl128x/fmdrv_common.c:745:3: warning: comparison is always false due to limited range of data type [-Wtype-limits]
drivers/media/radio/wl128x/fmdrv_rx.c:308:2: warning: comparison is always false due to limited range of data type [-Wtype-limits]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/platform/soc_camera/soc_camera.c:1051:8: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/au0828/au0828-dvb.c:275:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/bt8xx/bttv-driver.c:308:3: warning: initialized field overwritten [-Woverride-init]
drivers/media/pci/bt8xx/bttv-driver.c:308:3: warning: (near initialization for 'bttv_tvnorms[0].cropcap.bounds.height') [-Woverride-init]
drivers/media/pci/bt8xx/bttv-driver.c: In function 'bttv_remove':
drivers/media/pci/bt8xx/bttv-driver.c:4467:29: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/dvb-usb-v2/anysee.c:1179:5: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized]
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/tuners/tua9001.c:211:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/radio/wl128x/fmdrv_common.c:1619:47: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/platform/m2m-deinterlace.c:229:15: warning: variable 'd_size' set but not used [-Wunused-but-set-variable]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
get rid of a few warnings about empty body:
drivers/media/pci/ngene/ngene-core.c:756:3: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
drivers/media/pci/ngene/ngene-cards.c:429:5: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
Those are due to some commented code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/i2c/soc_camera/ov2640.c:899:32: warning: variable 'win' set but not used [-Wunused-but-set-variable]
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On gcc, enums are generally unsigned, except if a negative value
is declared. Due to that, warnings may happen there:
drivers/media/dvb-frontends/cx22700.c:142:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
drivers/media/dvb-frontends/cx22700.c:155:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
drivers/media/dvb-frontends/cx24123.c:341:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
drivers/media/dvb-frontends/l64781.c:183:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
drivers/media/dvb-frontends/l64781.c:187:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
drivers/media/dvb-frontends/mt312.c:552:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
drivers/media/dvb-frontends/mt312.c:560:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
As other compilers might be using signed values, the better is to
keep the checks there, casting the value to avoid the warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/drxk_hard.c:68:13: warning: 'IsA1WithPatchCode' defined but not used [-Wunused-function]
drivers/media/dvb-frontends/drxk_hard.c:73:13: warning: 'IsA1WithRomCode' defined but not used [-Wunused-function]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/cx88/cx88-mpeg.c: In function 'cx8802_mpeg_irq':
drivers/media/pci/cx88/cx88-mpeg.c:419:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-mpeg.c: In function 'cx8802_irq':
drivers/media/pci/cx88/cx88-mpeg.c:453:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-alsa.c: In function 'snd_cx88_create':
drivers/media/pci/cx88/cx88-alsa.c:818:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-alsa.c:837:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-alsa.c: In function 'cx88_audio_initdev':
drivers/media/pci/cx88/cx88-alsa.c:912:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c: In function 'blackbird_mbox_func':
drivers/media/pci/cx88/cx88-blackbird.c:327:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:333:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:360:4: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c: In function 'blackbird_find_mailbox':
drivers/media/pci/cx88/cx88-blackbird.c:421:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c: In function 'blackbird_load_firmware':
drivers/media/pci/cx88/cx88-blackbird.c:444:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:451:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:453:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:459:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:466:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:487:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:492:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:503:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c: In function 'blackbird_initialize_codec':
drivers/media/pci/cx88/cx88-blackbird.c:560:4: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:566:4: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
drivers/media/pci/cx88/cx88-blackbird.c:569:3: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/cx88/cx88.h:97:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
drivers/media/pci/cx88/cx88.h:103:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
drivers/media/pci/cx88/cx88-core.c:649:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
drivers/media/pci/cx88/cx88-core.c:654:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
drivers/media/pci/cx88/cx88-core.c:659:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
drivers/media/pci/cx88/cx88-core.c:664:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
drivers/media/pci/cx88/cx88-core.c:684:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
drivers/media/pci/cx88/cx88-core.c:695:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/gspca/gspca.c: In function 'vidioc_querybuf':
drivers/media/usb/gspca/gspca.c:1590:6: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/gspca/jeilinj.c: In function 'jlj_read1':
drivers/media/usb/gspca/jeilinj.c:117:66: warning: parameter 'response' set but not used [-Wunused-but-set-parameter]
The code still doesn't make much sense, as response is never tested
there.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are hundreds of messages like this one, when GSPCA debug is
disabled, when compiled with W=1:
drivers/media/usb/gspca/spca500.c:725:46: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
Get rid of it, especially as it might actually cause troubles on
some places.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/pwc/pwc-if.c: In function 'usb_pwc_probe':
drivers/media/usb/pwc/pwc-if.c:1003:16: warning: ignoring return value of 'vb2_queue_init', declared with attribute warn_unused_result [-Wunused-result]
In the past, it used to have a logic there at queue init that would
BUG() on errors. This logic got removed. Drivers are now required
to explicitly handle the queue initialization errors, or very bad
things may happen.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:199:5: warning: no previous prototype for 'pvr2_s_std' [-Wmissing-prototypes]
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:368:5: warning: no previous prototype for 'pvr2_s_frequency' [-Wmissing-prototypes]
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:227:5: warning: no previous prototype for 'dvb_usbv2_adapter_stream_init' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:239:5: warning: no previous prototype for 'dvb_usbv2_adapter_stream_exit' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:372:5: warning: no previous prototype for 'dvb_usbv2_adapter_dvb_init' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:444:5: warning: no previous prototype for 'dvb_usbv2_adapter_dvb_exit' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:460:5: warning: no previous prototype for 'dvb_usbv2_device_power_ctrl' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:557:5: warning: no previous prototype for 'dvb_usbv2_adapter_frontend_init' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:626:5: warning: no previous prototype for 'dvb_usbv2_adapter_frontend_exit' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/usb_urb.c:115:5: warning: no previous prototype for 'usb_urb_free_urbs' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/usb_urb.c:208:5: warning: no previous prototype for 'usb_free_stream_buffers' [-Wmissing-prototypes]
drivers/media/usb/dvb-usb-v2/usb_urb.c:226:5: warning: no previous prototype for 'usb_alloc_stream_buffers' [-Wmissing-prototypes]
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/cx231xx/cx231xx-avcore.c: In function 'cx231xx_capture_start':
drivers/media/usb/cx231xx/cx231xx-avcore.c:2637:3: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/cx231xx/cx231xx-avcore.c:1071:5: warning: no previous prototype for 'stopAudioFirmware' [-Wmissing-prototypes]
drivers/media/usb/cx231xx/cx231xx-avcore.c:1076:5: warning: no previous prototype for 'restartAudioFirmware' [-Wmissing-prototypes]
drivers/media/usb/cx231xx/cx231xx-cards.c:689:6: warning: no previous prototype for 'cx231xx_reset_out' [-Wmissing-prototypes]
drivers/media/usb/cx231xx/cx231xx-cards.c:697:6: warning: no previous prototype for 'cx231xx_enable_OSC' [-Wmissing-prototypes]
drivers/media/usb/cx231xx/cx231xx-cards.c:701:6: warning: no previous prototype for 'cx231xx_sleep_s5h1432' [-Wmissing-prototypes]
drivers/media/usb/cx231xx/cx231xx-i2c.c:75:5: warning: no previous prototype for 'cx231xx_i2c_send_bytes' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/au0828/au0828-cards.c:28:6: warning: no previous prototype for 'hvr950q_cs5340_audio' [-Wmissing-prototypes]
drivers/media/usb/au0828/au0828-video.c:161:6: warning: no previous prototype for 'au0828_uninit_isoc' [-Wmissing-prototypes]
drivers/media/usb/au0828/au0828-video.c:200:5: warning: no previous prototype for 'au0828_init_isoc' [-Wmissing-prototypes]
drivers/media/usb/au0828/au0828-video.c:786:5: warning: no previous prototype for 'au0828_analog_stream_enable' [-Wmissing-prototypes]
drivers/media/usb/au0828/au0828-video.c:813:6: warning: no previous prototype for 'au0828_analog_stream_reset' [-Wmissing-prototypes]
drivers/media/usb/au0828/au0828-video.c:916:6: warning: no previous prototype for 'au0828_vid_buffer_timeout' [-Wmissing-prototypes]
drivers/media/usb/au0828/au0828-video.c:940:6: warning: no previous prototype for 'au0828_vbi_buffer_timeout' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The carrier detect return value is never used on nuvoton driver:
drivers/media/rc/nuvoton-cir.c: In function 'nvt_process_rx_ir_data':
drivers/media/rc/nuvoton-cir.c:623:6: warning: variable 'carrier' set but not used [-Wunused-but-set-variable]
Also, this would be called only if a boolean variable is enabled,
but there's no condition that enables it inside the driver. So,
comment the carrier detection code, as it might be useful later,
and remove the unused glue code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/radio/radio-isa.c:194:24: warning: no previous prototype for 'radio_isa_alloc' [-Wmissing-prototypes]
drivers/media/radio/radio-isa.c:210:5: warning: no previous prototype for 'radio_isa_common_probe' [-Wmissing-prototypes]
drivers/media/radio/radio-isa.c:290:5: warning: no previous prototype for 'radio_isa_common_remove' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/saa7164/saa7164-api.c:1489:5: warning: no previous prototype for 'saa7164_api_modify_gpio' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-api.c:168:5: warning: no previous prototype for 'saa7164_api_set_gop_size' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-api.c:622:5: warning: no previous prototype for 'saa7164_api_set_dif' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-api.c:825:5: warning: no previous prototype for 'saa7164_api_configure_port_vbi' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-api.c:861:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ts' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-api.c:895:5: warning: no previous prototype for 'saa7164_api_configure_port_mpeg2ps' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-api.c:928:5: warning: no previous prototype for 'saa7164_api_dump_subdevs' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-bus.c:109:6: warning: no previous prototype for 'saa7164_bus_dumpmsg' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-bus.c:84:6: warning: no previous prototype for 'saa7164_bus_verify' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-cmd.c:135:5: warning: no previous prototype for 'saa7164_cmd_dequeue' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-cmd.c:189:5: warning: no previous prototype for 'saa7164_cmd_set' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-cmd.c:262:5: warning: no previous prototype for 'saa7164_cmd_wait' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-cmd.c:26:5: warning: no previous prototype for 'saa7164_cmd_alloc_seqno' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-cmd.c:45:6: warning: no previous prototype for 'saa7164_cmd_free_seqno' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-cmd.c:57:6: warning: no previous prototype for 'saa7164_cmd_timeout_seqno' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-cmd.c:67:5: warning: no previous prototype for 'saa7164_cmd_timeout_get' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-encoder.c:1104:29: warning: no previous prototype for 'saa7164_enc_next_buf' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-encoder.c:1290:5: warning: no previous prototype for 'saa7164_g_chip_ident' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-encoder.c:1300:5: warning: no previous prototype for 'saa7164_g_register' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-encoder.c:1313:5: warning: no previous prototype for 'saa7164_s_register' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-fw.c:40:5: warning: no previous prototype for 'saa7164_dl_wait_ack' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-fw.c:56:5: warning: no previous prototype for 'saa7164_dl_wait_clr' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-fw.c:74:5: warning: no previous prototype for 'saa7164_downloadimage' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-vbi.c:1050:29: warning: no previous prototype for 'saa7164_vbi_next_buf' [-Wmissing-prototypes]
drivers/media/pci/saa7164/saa7164-vbi.c:987:5: warning: no previous prototype for 'saa7164_vbi_fmt' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/mantis/mantis_input.c:107:5: warning: no previous prototype for 'mantis_input_init' [-Wmissing-prototypes]
drivers/media/pci/mantis/mantis_input.c:153:5: warning: no previous prototype for 'mantis_exit' [-Wmissing-prototypes]
drivers/media/pci/mantis/mantis_uart.c:64:5: warning: no previous prototype for 'mantis_uart_read' [-Wmissing-prototypes]
drivers/media/pci/mantis/mantis_vp1033.c:118:5: warning: no previous prototype for 'lgtdqcs001f_set_symbol_rate' [-Wmissing-prototypes]
drivers/media/pci/mantis/mantis_vp1033.c:86:5: warning: no previous prototype for 'lgtdqcs001f_tuner_set' [-Wmissing-prototypes]
Note: there is already a mantis_exit at the mantis driver. So,
this should be renamed to mantis_input_exit.
The mantis_input code is currently unused, as it doesn't implement the RC API
right.
Patches for it are sent for discussions, but were never
accepted. So, while this is not fixed, the entire code inside
mantis_input can simply be commented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/ivtv/ivtv-ioctl.c: In function 'ivtv_s_input':
drivers/media/pci/ivtv/ivtv-ioctl.c:996:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/ivtv/ivtv-alsa-main.c:208:5: warning: no previous prototype for 'ivtv_alsa_load' [-Wmissing-prototypes]
drivers/media/pci/ivtv/ivtv-alsa-pcm.c:325:5: warning: no previous prototype for 'snd_ivtv_pcm_create' [-Wmissing-prototypes]
drivers/media/pci/ivtv/ivtv-alsa-pcm.c:72:6: warning: no previous prototype for 'ivtv_alsa_announce_pcm_data' [-Wmissing-prototypes]
drivers/media/pci/ivtv/ivtv-firmware.c:279:5: warning: no previous prototype for 'ivtv_firmware_restart' [-Wmissing-prototypes]
drivers/media/pci/ivtv/ivtv-ioctl.c:1171:5: warning: no previous prototype for 'ivtv_s_std' [-Wmissing-prototypes]
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/cx25821/cx25821-audio-upstream.c:136:5: warning: no previous prototype for 'cx25821_risc_buffer_upstream_audio' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-audio-upstream.c:200:6: warning: no previous prototype for 'cx25821_free_memory_audio' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-audio-upstream.c:259:5: warning: no previous prototype for 'cx25821_get_audio_data' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-audio-upstream.c:354:5: warning: no previous prototype for 'cx25821_openfile_audio' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-audio-upstream.c:47:5: warning: no previous prototype for 'cx25821_sram_channel_setup_upstream_audio' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-audio-upstream.c:493:5: warning: no previous prototype for 'cx25821_audio_upstream_irq' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-audio-upstream.c:637:5: warning: no previous prototype for 'cx25821_start_audio_dma_upstream' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-biffuncs.h:28:11: warning: no previous prototype for 'getBit' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-biffuncs.h:33:12: warning: no previous prototype for 'clearBitAtPos' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-biffuncs.h:38:12: warning: no previous prototype for 'setBitAtPos' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-i2c.c:332:6: warning: no previous prototype for 'cx25821_av_clk' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video.c:294:5: warning: no previous prototype for 'cx25821_restart_video_queue' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video.c:345:6: warning: no previous prototype for 'cx25821_vid_timeout' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream.c:176:5: warning: no previous prototype for 'cx25821_risc_buffer_upstream' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream.c:303:5: warning: no previous prototype for 'cx25821_get_frame' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream.c:408:5: warning: no previous prototype for 'cx25821_openfile' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream.c:489:5: warning: no previous prototype for 'cx25821_upstream_buffer_prepare' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream.c:551:5: warning: no previous prototype for 'cx25821_video_upstream_irq' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream.c:667:6: warning: no previous prototype for 'cx25821_set_pixelengine' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream.c:699:5: warning: no previous prototype for 'cx25821_start_video_dma_upstream' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:126:5: warning: no previous prototype for 'cx25821_risc_buffer_upstream_ch2' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:258:5: warning: no previous prototype for 'cx25821_get_frame_ch2' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:363:5: warning: no previous prototype for 'cx25821_openfile_ch2' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:510:5: warning: no previous prototype for 'cx25821_video_upstream_irq_ch2' [-Wmissing-prototypes]
drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:650:5: warning: no previous prototype for 'cx25821_start_video_dma_upstream_ch2' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change dprintk logic to avoid the following warning:
drivers/media/pci/cx23885/cx23885-alsa.c: In function 'cx23885_audio_register':
drivers/media/pci/cx23885/cx23885-alsa.c:515:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/cx23885/altera-ci.c:266:5: warning: no previous prototype for 'altera_ci_op_cam' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:301:5: warning: no previous prototype for 'altera_ci_read_attribute_mem' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:307:5: warning: no previous prototype for 'altera_ci_write_attribute_mem' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:313:5: warning: no previous prototype for 'altera_ci_read_cam_ctl' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:319:5: warning: no previous prototype for 'altera_ci_write_cam_ctl' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:325:5: warning: no previous prototype for 'altera_ci_slot_reset' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:368:5: warning: no previous prototype for 'altera_ci_slot_shutdown' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:374:5: warning: no previous prototype for 'altera_ci_slot_ts_ctl' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:451:5: warning: no previous prototype for 'altera_poll_ci_slot_status' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:462:6: warning: no previous prototype for 'altera_hw_filt_release' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:584:5: warning: no previous prototype for 'altera_pid_feed_control' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:606:5: warning: no previous prototype for 'altera_ci_start_feed' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:613:5: warning: no previous prototype for 'altera_ci_stop_feed' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:620:5: warning: no previous prototype for 'altera_ci_start_feed_1' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:625:5: warning: no previous prototype for 'altera_ci_stop_feed_1' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:630:5: warning: no previous prototype for 'altera_ci_start_feed_2' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:635:5: warning: no previous prototype for 'altera_ci_stop_feed_2' [-Wmissing-prototypes]
drivers/media/pci/cx23885/altera-ci.c:640:5: warning: no previous prototype for 'altera_hw_filt_init' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:123:5: warning: no previous prototype for 'netup_write_i2c' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:150:5: warning: no previous prototype for 'netup_ci_get_mem' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:169:5: warning: no previous prototype for 'netup_ci_op_cam' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:239:5: warning: no previous prototype for 'netup_ci_read_attribute_mem' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:245:5: warning: no previous prototype for 'netup_ci_write_attribute_mem' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:251:5: warning: no previous prototype for 'netup_ci_read_cam_ctl' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:257:5: warning: no previous prototype for 'netup_ci_write_cam_ctl' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:263:5: warning: no previous prototype for 'netup_ci_slot_reset' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:292:5: warning: no previous prototype for 'netup_ci_slot_shutdown' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:298:5: warning: no previous prototype for 'netup_ci_set_irq' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:319:5: warning: no previous prototype for 'netup_ci_slot_ts_ctl' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:375:5: warning: no previous prototype for 'netup_ci_slot_status' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:402:5: warning: no previous prototype for 'netup_poll_ci_slot_status' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:415:5: warning: no previous prototype for 'netup_ci_init' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:520:6: warning: no previous prototype for 'netup_ci_exit' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cimax2.c:90:5: warning: no previous prototype for 'netup_read_i2c' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-av.c:26:6: warning: no previous prototype for 'cx23885_av_work_handler' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-cards.c:1430:5: warning: no previous prototype for 'netup_jtag_io' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-core.c:306:6: warning: no previous prototype for 'cx23885_irq_add' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-dvb.c:662:5: warning: no previous prototype for 'netup_altera_fpga_rw' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-f300.c:150:5: warning: no previous prototype for 'f300_set_voltage' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-input.c:249:5: warning: no previous prototype for 'cx23885_input_init' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-input.c:353:6: warning: no previous prototype for 'cx23885_input_fini' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-input.c:76:6: warning: no previous prototype for 'cx23885_input_rx_work_handler' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-ioctl.c:134:5: warning: no previous prototype for 'cx23885_g_register' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-ioctl.c:185:5: warning: no previous prototype for 'cx23885_s_register' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-ioctl.c:27:5: warning: no previous prototype for 'cx23885_g_chip_ident' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-ir.c:101:6: warning: no previous prototype for 'cx23885_ir_tx_v4l2_dev_notify' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-ir.c:37:6: warning: no previous prototype for 'cx23885_ir_rx_work_handler' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-ir.c:60:6: warning: no previous prototype for 'cx23885_ir_tx_work_handler' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23885-ir.c:76:6: warning: no previous prototype for 'cx23885_ir_rx_v4l2_dev_notify' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23888-ir.c:1203:5: warning: no previous prototype for 'cx23888_ir_probe' [-Wmissing-prototypes]
drivers/media/pci/cx23885/cx23888-ir.c:1253:5: warning: no previous prototype for 'cx23888_ir_remove' [-Wmissing-prototypes]
drivers/media/pci/cx23885/netup-init.c:109:6: warning: no previous prototype for 'netup_initialize' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/pci/cx18/cx18-alsa-main.c:200:5: warning: no previous prototype for 'cx18_alsa_load' [-Wmissing-prototypes]
drivers/media/pci/cx18/cx18-alsa-pcm.c:325:5: warning: no previous prototype for 'snd_cx18_pcm_create' [-Wmissing-prototypes]
drivers/media/pci/cx18/cx18-alsa-pcm.c:72:6: warning: no previous prototype for 'cx18_alsa_announce_pcm_data' [-Wmissing-prototypes]
drivers/media/pci/cx18/cx18-streams.c💯6: warning: no previous prototype for 'cx18_dma_free' [-Wmissing-prototypes]
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/tda10071.c:119:5: warning: no previous prototype for 'tda10071_rd_reg_mask' [-Wmissing-prototypes]
drivers/media/dvb-frontends/tda10071.c:99:5: warning: no previous prototype for 'tda10071_wr_reg_mask' [-Wmissing-prototypes]
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/stv0367.c:1267:25: warning: no previous prototype for 'stv0367ter_lock_algo' [-Wmissing-prototypes]
drivers/media/dvb-frontends/stv0367.c:1531:5: warning: no previous prototype for 'stv0367ter_init' [-Wmissing-prototypes]
drivers/media/dvb-frontends/stv0367.c:2381:21: warning: no previous prototype for 'stv0367cab_SetQamSize' [-Wmissing-prototypes]
drivers/media/dvb-frontends/stv0367.c:2765:5: warning: no previous prototype for 'stv0367cab_init' [-Wmissing-prototypes]
drivers/media/dvb-frontends/stv0367.c:882:4: warning: no previous prototype for 'stv0367_getbits' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/rtl2832.c:268:5: warning: no previous prototype for 'rtl2832_rd_demod_reg' [-Wmissing-prototypes]
drivers/media/dvb-frontends/rtl2832.c:308:5: warning: no previous prototype for 'rtl2832_wr_demod_reg' [-Wmissing-prototypes]
drivers/media/dvb-frontends/rtl2832.c:513:5: warning: no previous prototype for 'rtl2832_get_tune_settings' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/rtl2830.c:133:5: warning: no previous prototype for 'rtl2830_wr_reg_mask' [-Wmissing-prototypes]
drivers/media/dvb-frontends/rtl2830.c:153:5: warning: no previous prototype for 'rtl2830_rd_reg_mask' [-Wmissing-prototypes]
drivers/media/dvb-frontends/rtl2830.c:259:5: warning: no previous prototype for 'rtl2830_get_tune_settings' [-Wmissing-prototypes]
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/drxd_hard.c:1751:5: warning: no previous prototype for 'SetOperationMode' [-Wmissing-prototypes]
drivers/media/dvb-frontends/drxd_hard.c:2615:5: warning: no previous prototype for 'DRXD_init' [-Wmissing-prototypes]
drivers/media/dvb-frontends/drxd_hard.c:2777:5: warning: no previous prototype for 'DRXD_status' [-Wmissing-prototypes]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The RC_TYPE_* defines are currently used both where a single protocol is
expected and where a bitmap of protocols is expected.
Functions like rc_keydown() and functions which add/remove entries to the
keytable want a single protocol. Future userspace APIs would also
benefit from numeric protocols (rather than bitmap ones). Keytables are
smaller if they can use a small(ish) integer rather than a bitmap.
Other functions or struct members (e.g. allowed_protos,
enabled_protocols, etc) accept multiple protocols and need a bitmap.
Using different types reduces the risk of programmer error. Using a
protocol enum whereever possible also makes for a more future-proof
user-space API as we don't need to worry about a sufficient number of
bits being available (e.g. in structs used for ioctl() calls).
The use of both a number and a corresponding bit is dalso one in e.g.
the input subsystem as well (see all the references to set/clear bit when
changing keytables for example).
This patch separate the different usages in preparation for
upcoming patches.
Where a single protocol is expected, enum rc_type is used; where one or more
protocol(s) are expected, something like u64 is used.
The patch has been rewritten so that the format of the sysfs "protocols"
file is no longer altered (at the loss of some detail). The file itself
should probably be deprecated in the future though.
Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch removes some code duplication by using
module_platform_driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch removes some code duplication by using
module_platform_driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch removes some code duplication by using
module_platform_driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch removes some code duplication by using
module_platform_driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The omap_vout driver tries to set the DSS overlay_info using set_overlay_info()
when the physical address for the overlay is still not configured. This happens
in omap_vout_probe() and vidioc_s_fmt_vid_out().
The calls to omapvid_init(which internally calls set_overlay_info()) are removed
from these functions. They don't need to be called as the omap_vout_device
struct anyway maintains the overlay related changes made. Also, remove the
explicit call to set_overlay_info() in vidioc_streamon(), this was used to set
the paddr, this isn't needed as omapvid_init() does the same thing later.
These changes are required as the DSS2 driver since 3.3 kernel doesn't let you
set the overlay info with paddr as 0.
Signed-off-by: Archit Taneja <archit@ti.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
CODA_7541 is the coda_product type for mx53.
The 'driver_data' for mx53 is CODA_IMX53 instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
commit 136b5721d (workqueue: deprecate __cancel_delayed_work()) made
__cancel_delayed_work deprecated. Use cancel_delayed_work instead and get rid of
the following warning:
drivers/media/platform/coda.c:1543: warning: '__cancel_delayed_work' is deprecated (declared at include/linux/workqueue.h:437)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As G-Scaler is going to stay unchanged across all exynos5 series
SoCs, changing the driver compatible string name to
"samsung,exynos5-gsc" from "samsung,exynos5250-gsc".
This change is as per the discussion in the devicetree forum.
http://www.mail-archive.com/devicetree-discuss@lists.ozlabs.org/msg16448.html
Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove the const keyword from the V4L2 subdev events operations to match
the V4L2 API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Commit 4f996594 ("v4l2: make vidioc_s_crop const") modified the
vidioc_s_crop operation prototype but forgot to update the OMAP3 ISP
driver. Add a const keyword to fix the function prototype.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The dereference should be moved below the NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Using list_move_tail() instead of list_del() + list_add_tail().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Using list_move_tail() instead of list_del() + list_add_tail().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Using list_move_tail() instead of list_del() + list_add_tail().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The header is not needed, so remove it.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>