Commit Graph

22 Commits

Author SHA1 Message Date
Sean Young 37b0b4e90d [media] winbond-cir: add carrier detection
The winbond hardware has a counter for leading edges, which increases as
they are received. As we read raw IR from a fifo in an interrupt handler,
we cannot correlate them to specific IR pulses so we simply count all
pulses and edges until we go idle and disable the receiver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:06:17 -02:00
Sean Young c496e716e0 [media] winbond-cir: increase IR receiver resolution
This is needed for carrier reporting.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:05:18 -02:00
Sean Young e5eda7faea [media] winbond-cir: fix idle mode
The receiver is never disabled by idle mode since rxstate never gets set
to RXSTATE_ACTIVE, so we keep on getting interrupts after the first IR
activity ends. Note that ir_raw_event_reset() already calls
ir_raw_event_handle().

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21 17:03:30 -02:00
Sean Young a66cd0b691 [media] winbond-cir: do not rename input name
"54fd321 [media] winbond: remove space from driver name" inadvertently
renamed the input device name.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-28 16:46:31 -02:00
David Härdeman c003ab1bed [media] rc-core: add separate defines for protocol bitmaps and numbers
The RC_TYPE_* defines are currently used both where a single protocol is
expected and where a bitmap of protocols is expected.

Functions like rc_keydown() and functions which add/remove entries to the
keytable want a single protocol. Future userspace APIs would also
benefit from numeric protocols (rather than bitmap ones). Keytables are
smaller if they can use a small(ish) integer rather than a bitmap.

Other functions or struct members (e.g. allowed_protos,
enabled_protocols, etc) accept multiple protocols and need a bitmap.

Using different types reduces the risk of programmer error. Using a
protocol enum whereever possible also makes for a more future-proof
user-space API as we don't need to worry about a sufficient number of
bits being available (e.g. in structs used for ioctl() calls).

The use of both a number and a corresponding bit is dalso one in e.g.
the input subsystem as well (see all the references to set/clear bit when
changing keytables for example).

This patch separate the different usages in preparation for
upcoming patches.

Where a single protocol is expected, enum rc_type is used; where one or more
protocol(s) are expected, something like u64 is used.

The patch has been rewritten so that the format of the sysfs "protocols"
file is no longer altered (at the loss of some detail). The file itself
should probably be deprecated in the future though.

Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27 11:49:51 -02:00
Sean Young 54fd321e13 [media] winbond: remove space from driver name
-snip-
ACTION=add
DEVPATH=/devices/pnp0/00:04/rc/rc0
DRV_NAME=Winbond CIR
NAME=rc-rc6-mce
SUBSYSTEM=rc
UDEV_LOG=6
USEC_INITIALIZED=88135858
run: '/usr/bin/ir-keytable -a /etc/rc_maps.cfg -s rc0'
Having a space makes it impossible to match in /etc/rc_maps.cfg.

[root@pequod ~]# udevadm test /sys/class/rc/rc0
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-07 09:04:18 -03:00
David Härdeman 7bfb5dc1cd [media] winbond-cir: asynchronous tx
Change winbond-cir's tx support to be asynchronous and not to mess with
the TX buffer. Essentially the winbond-cir counterpart to the patch
Sean Young sent for iguanair.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25 14:08:46 -03:00
David Härdeman 30cedcf34f [media] winbond-cir: correctness fix
This is a minor correctness fix for the duration calculation in
winbond-cir (the read value should be incremented by one).

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25 13:09:10 -03:00
Anton Blanchard 8299d62843 [media] winbond-cir: Initialise timeout, driver_type and allowed_protos
We need to set a timeout so we can go idle on no activity.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06 19:36:38 -03:00
Anton Blanchard 57f4422f7b [media] winbond-cir: Fix txandrx module info
We aren't getting any module info for the txandx option because
of a typo:

parm:           txandrx:bool

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06 19:36:37 -03:00
Luis Henriques 9ef449c6b3 [media] rc: Postpone ISR registration
An early registration of an ISR was causing a crash to several users (for
example, with the ite-cir driver: http://bugs.launchpad.net/bugs/972723).
The reason was that IRQs were being triggered before a driver
initialisation was completed.

This patch fixes this by moving the invocation to request_irq() and to
request_region() to a later stage on the driver probe function.

Cc: <stable@vger.kernel.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-26 15:41:16 -03:00
David Härdeman d9b786955f [media] rc-core: set mode for winbond-cir
Setting the correct mode is required by rc-core or scancodes won't be
generated (which isn't very user-friendly).

This one-line fix should be suitable for 3.4-rc2.

Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-18 11:18:48 -03:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Al Viro d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Joe Perches d8a10ac948 [media] winbond-cir: Use current logging styles
Add pr_fmt, convert printks to pr_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-03 20:58:05 -03:00
David Härdeman 5588dc2b02 [media] rc-core: lirc use unsigned int
Durations can never be negative, so it makes sense to consistently use
unsigned int for LIRC transmission. Contrary to the initial impression,
this shouldn't actually change the userspace API.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:52:59 -03:00
David Härdeman b87f2eddfa [media] rc-core: fix winbond-cir issues
The conversion of winbond-cir to use rc-core seems to have missed a
a few bits and pieces which were in my local tree. Kudos to
Juan Jesús García de Soria Lucena <skandalfo@gmail.com> for noticing.

[mchehab@redhat.com: fix two UTF-8 violations]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:52:24 -03:00
David Härdeman 488ebc4808 [media] rc-core: use ir_raw_event_store_with_filter in winbond-cir
Using ir_raw_event_store_with_filter() saves about 20 lines of code.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:29:54 -03:00
David Härdeman c829f2672f [media] rc-core: add TX support to the winbond-cir driver
This patch adds preliminary IR TX capabilities to the
winbond-cir driver.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:29:51 -03:00
David Härdeman 67cdd42e06 [media] rc-core: int to bool conversion for winbond-cir
Using bool instead of an int helps readability a bit.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:29:50 -03:00
Mauro Carvalho Chehab 6bda96447c [media] rc: rename the remaining things to rc_core
The Remote Controller subsystem is meant to be used not only by Infra Red
but also for similar types of Remote Controllers. The core is not specific
to Infra Red. As such, rename:
	- ir-core.h to rc-core.h
	- IR_CORE to RC_CORE
	- namespace inside rc-core.c/rc-core.h

To be consistent with the other changes.

No functional change on this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:50 -02:00
David Härdeman 5b2e303f6d [media] rc-core: convert winbond-cir
Move winbond-cir from drivers/input/misc/ into drivers/media/rc/
and convert it to use rc-core.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:38 -02:00