Since
commit 39b50c6038 ("drm/atomic_helper: Stop modesets on unregistered
connectors harder")
We've been failing atomic checks if they try to enable new displays on
unregistered connectors. This is fine except for the one situation that
breaks atomic assumptions: suspend/resume. If a connector is
unregistered before we attempt to restore the atomic state, something we
end up failing the atomic check that happens when trying to restore the
state during resume.
Normally this would be OK: we try our best to make sure that the atomic
state pre-suspend can be restored post-suspend, but failures at that
point usually don't cause problems. That is of course, until we
introduced the new atomic MST VCPI helpers:
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5]
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5]
[drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd
CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea
RSP: 0018:ffff88841235f268 EFLAGS: 00010246
RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0
RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92
R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80
R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000
FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper]
? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper]
? __printk_safe_exit+0x10/0x10
? save_stack+0x8c/0xb0
? vprintk_func+0x96/0x1bf
? __printk_safe_exit+0x10/0x10
intel_atomic_check+0x234/0x4750 [i915]
? printk+0x9f/0xc5
? kmsg_dump_rewind_nolock+0xd9/0xd9
? _raw_spin_lock_irqsave+0xa4/0x140
? drm_atomic_check_only+0xb1/0x28b0 [drm]
? drm_dbg+0x186/0x1b0 [drm]
? drm_dev_dbg+0x200/0x200 [drm]
? intel_link_compute_m_n+0xb0/0xb0 [i915]
? drm_mode_put_tile_group+0x20/0x20 [drm]
? skl_plane_format_mod_supported+0x17f/0x1b0 [i915]
? drm_plane_check_pixel_format+0x14a/0x310 [drm]
drm_atomic_check_only+0x13c4/0x28b0 [drm]
? drm_state_info+0x220/0x220 [drm]
? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper]
? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper]
? kasan_unpoison_shadow+0x35/0x40
drm_atomic_commit+0x3b/0x100 [drm]
drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper]
drm_mode_setcrtc+0x636/0x1660 [drm]
? vprintk_func+0x96/0x1bf
? drm_dev_dbg+0x200/0x200 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? printk+0x9f/0xc5
? mutex_unlock+0x1d/0x40
? drm_mode_addfb2+0x2e9/0x3a0 [drm]
? rcu_sync_dtor+0x2e0/0x2e0
? drm_dbg+0x186/0x1b0 [drm]
? set_page_dirty+0x271/0x4d0
drm_ioctl_kernel+0x203/0x290 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_setversion+0x7f0/0x7f0 [drm]
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x34/0x70
drm_ioctl+0x445/0x950 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_getunique+0x220/0x220 [drm]
? expand_files.part.10+0x920/0x920
do_vfs_ioctl+0x1a1/0x13d0
? ioctl_preallocate+0x2b0/0x2b0
? __fget_light+0x2d6/0x390
? schedule+0xd7/0x2e0
? fget_raw+0x10/0x10
? apic_timer_interrupt+0xa/0x20
? apic_timer_interrupt+0xa/0x20
? rcu_cleanup_dead_rnp+0x2c0/0x2c0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x136/0x440
? syscall_return_slowpath+0x2d0/0x2d0
? do_page_fault+0x89/0x330
? __do_page_fault+0x9c0/0x9c0
? prepare_exit_to_usermode+0x188/0x200
? perf_trace_sys_enter+0x1090/0x1090
? __x64_sys_sigaltstack+0x280/0x280
? __put_user_4+0x1c/0x30
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f16ff89a09b
Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b
RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460
R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
---[ end trace d536c05c13c83be2 ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a
This appears to be happening because we destroy the VCPI allocations
when disabling all connected displays while suspending, and those VCPI
allocations don't get restored on resume due to failing to restore the
atomic state.
So, fix this by introducing the suspending option to
drm_atomic_helper_duplicate_state() and use that to indicate in the
atomic state that it's being used for suspending or resuming the system,
and thus needs to be fixed up by the driver. We can then use the new
state->duplicated hook to tell update_connector_routing() in
drm_atomic_check_modeset() to allow for modesets on unregistered
connectors, which allows us to restore atomic states that contain MST
topologies that were removed after the state was duplicated and thus:
mostly fixing suspend and resume. This just leaves some issues that were
introduced with nouveau, that will be addressed next.
Changes since v3:
* Remove ->duplicated hunks that I left in the VCPI helpers by accident.
These don't need to be here, that was the supposed to be the purpose
of the last revision
Changes since v2:
* Remove the changes in this patch to the VCPI helpers, they aren't
needed anymore
Changes since v1:
* Rename suspend_or_resume to duplicated
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-4-lyude@redhat.com
drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=3yxi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
This fixes a general protection fault, caused by accessing the contents
of a flip_done completion object that has already been freed. It occurs
due to the preemption of a non-blocking commit worker thread W by
another commit thread X. X continues to clear its atomic state at the
end, destroying the CRTC commit object that W still needs. Switching
back to W and accessing the commit objects then leads to bad results.
Worker W becomes preemptable when waiting for flip_done to complete. At
this point, a frequently occurring commit thread X can take over. Here's
an example where W is a worker thread that flips on both CRTCs, and X
does a legacy cursor update on both CRTCs:
...
1. W does flip work
2. W runs commit_hw_done()
3. W waits for flip_done on CRTC 1
4. > flip_done for CRTC 1 completes
5. W finishes waiting for CRTC 1
6. W waits for flip_done on CRTC 2
7. > Preempted by X
8. > flip_done for CRTC 2 completes
9. X atomic_check: hw_done and flip_done are complete on all CRTCs
10. X updates cursor on both CRTCs
11. X destroys atomic state
12. X done
13. > Switch back to W
14. W waits for flip_done on CRTC 2
15. W raises general protection fault
The error looks like so:
general protection fault: 0000 [#1] PREEMPT SMP PTI
**snip**
Call Trace:
lock_acquire+0xa2/0x1b0
_raw_spin_lock_irq+0x39/0x70
wait_for_completion_timeout+0x31/0x130
drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper]
amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu]
commit_tail+0x3d/0x70 [drm_kms_helper]
process_one_work+0x212/0x650
worker_thread+0x49/0x420
kthread+0xfb/0x130
ret_from_fork+0x3a/0x50
Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O)
gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm(O) drm(O)
Note that i915 has this issue masked, since hw_done is signaled after
waiting for flip_done. Doing so will block the cursor update from
happening until hw_done is signaled, preventing the cursor commit from
destroying the state.
v2: The reference on the commit object needs to be obtained before
hw_done() is signaled, since that's the point where another commit
is allowed to modify the state. Assuming that the
new_crtc_state->commit object still exists within flip_done() is
incorrect.
Fix by getting a reference in setup_commit(), and releasing it
during default_clear().
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
This leaves all the commit/check and state handling in drm_atomic.c,
while pulling all the uapi glue and the huge ioctl itself into a
seprate file.
This seems to almost perfectly split the rather big drm_atomic.c file
into 2 equal sizes.
Also adjust the kerneldoc and type a very terse overview text.
v2: Rebase.
v3: Fix tiny typo.
v4:
- Fixup armada, newly converted atomic driver hooray!
- Fixup msm/dpu1, newly added too.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really
shouldn't ever be used by drivers directly.
Unfortunately this means we need to move the set_writeback_fb function
around to avoid a forward decl.
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-5-daniel.vetter@ffwll.ch
We have a bunch of neat little macros all over the place which should
move to kernel.h. But some of them died in bikesheds on lkml, and we
need a decent home for them.
Start out by moving the for_each_if macro there.
v2: Rename to drm_util.h instead (Dave&Sean)
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-1-daniel.vetter@ffwll.ch
Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to
enable userspace to get a fence which will signal once the writeback is
complete. It is not allowed to request an out-fence without a
framebuffer attached to the connector.
A timeline is added to drm_writeback_connector for use by the writeback
out-fences.
In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence
is set to -1.
Changes from v2:
- Rebase onto Gustavo Padovan's v9 explicit sync series
- Change out_fence_ptr type to s32 __user *
- Set *out_fence_ptr to -1 in drm_atomic_connector_set_property
- Store fence in drm_writeback_job
Gustavo Padovan:
- Move out_fence_ptr out of connector_state
- Signal fence from drm_writeback_signal_completion instead of
in driver directly
Changes from v3:
- Rebase onto commit 7e9081c5aa ("drm/fence: fix memory overwrite
when setting out_fence fd") (change out_fence_ptr to s32 __user *,
for real this time.)
- Update documentation around WRITEBACK_OUT_FENCE_PTR
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/229036/
Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.
Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().
Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.
When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.
Changes since v1:
- Added drm_writeback.c + documentation
- Added helper to initialize writeback connector in one go
- Added core checks
- Squashed into a single commit
- Dropped the client cap
- Writeback framebuffers are no longer persistent
Changes since v2:
Daniel Vetter:
- Subclass drm_connector to drm_writeback_connector
- Relax check to allow CRTC to be set without an FB
- Add some writeback_ prefixes
- Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
Gustavo Padovan:
- Add drm_writeback_job to handle writeback signalling centrally
Changes since v3:
- Rebased
- Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS
Chances since v4:
- Embed a drm_encoder inside the drm_writeback_connector to
reduce the amount of boilerplate code required from the drivers
that are using it.
Changes since v5:
- Added Rob Clark's atomic_commit() vfunc to connector helper
funcs, so that writeback jobs are committed from atomic helpers
- Updated create_writeback_properties() signature to return an
error code rather than a boolean false for failure.
- Free writeback job with the connector state rather than when
doing the cleanup_work()
Changes since v7:
- fix extraneous use of out_fence that is only introduced in a
subsequent patch.
Changes since v8:
- whitespace changes pull from subsequent patch
Changes since v9:
- Revert the v6 changes that free the writeback job in the connector
state cleanup and return to doing it in the cleanup_work() function
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/229037/
Stop playing around with plane->crtc/fb/old_fb with atomic
drivers. Make life a lot simpler when we don't have to do the
magic old_fb vs. fb dance around plane updates. That way we
can't risk plane->fb getting out of sync with plane->state->fb
and we're less likely to leak any refcounts as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Add reverse iterator for_each_oldnew_plane_in_state_reverse to
compliment the for_each_oldnew_plane_in_state way or reading plane
states.
The plane states are required to be read in reverse order for
amd drivers, cause the z order convention followed in linux is
opposite to how the planes are supposed to be presented to DC
engine, which is in common to both windows and linux.
V2: fix compile time errors due to -Werror flag.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520392203-6885-1-git-send-email-shirish.s@amd.com
Driver Changes:
- Lift alpha_support protection from Cannonlake (Rodrigo)
* Meaning the driver should mostly work for the hardware we had
at our disposal when testing
* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)
- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)
- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)
* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20180221
drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
drm/i915: Move the policy for placement of the GGTT vma into the caller
drm/i915: Also check view->type for a normal GGTT view
drm/i915: Drop WaDoubleCursorLP3Latency:ivb
drm/i915: Set the primary plane pipe select bits on gen4
drm/i915: Don't set cursor pipe select bits on g4x+
drm/i915: Assert that we don't overflow frontbuffer tracking bits
drm/i915: Track number of pending freed objects
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
drm/i915: Clear the in-use marker on execbuf failure
drm/i915: Prune gen8_gt_irq_handler
drm/i915: Track GT interrupt handling using the master iir
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
drm/i915: Release connector iterator on a digital port conflict.
drm/i915/execlists: Remove too early assert
drm/i915: Assert that we always complete a submission to guc/execlists
drm: move read_domains and write_domain into i915
...
570e86963a ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64.
The flip ioctl receives a 32-bit target sequence from user space and is
compared against the current sequence from drm_crtc_vblank_count(). So,
typecast return from drm_crtc_vblank_count() explicitly to add clarity.
__drm_crtcs_state.last_vblank_count however only ever stores the value from
drm_crtc_vblank_count() and can be upgraded to u64.
Cc: Keith Packard <keithp@keithp.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-7-dhinakaran.pandiyan@intel.com
During a non-blocking commit, it is possible to return before the
commit_tail work is queued (-ERESTARTSYS, for example).
Since a reference on the crtc commit object is obtained for the pending
vblank event when preparing the commit, the above situation will leave
us with an extra reference.
Therefore, if the commit_tail worker has not consumed the event at the
end of a commit, release it's reference.
Changes since v1:
- Also check for state->event->base.completion being set, to
handle the case where stall_checks() fails in setup_crtc_commit().
Changes since v2:
- Add a flag to drm_crtc_commit, to prevent dereferencing a freed event.
i915 may unreference the state in a worker.
Fixes: 24835e442f ("drm: reference count event->completion")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> #v1
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117115108.29608-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
We don't want people to accidentally stumble over there.
Also rename the plane helpers to legacy plane helpers. After Ville's
patch to make the clipping helper atomic and move it to
drm_atomic_helper.c there's nothing left in there that should be
useful for modern drivers.
v2: Laurent had a few questions around how state is added to
drm_atomic_state, tried to clarify that. And spotted another sentence
where the docs suggested subclassing.
v3: Small polish (Alex).
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-6-daniel.vetter@ffwll.ch
DK put some nice docs into the commit introducing driver private
state, but in the git history alone it'll be lost.
Also, since Ville remove the void* usage it's a good opportunity to
give the driver private stuff some tlc on the doc front.
Finally try to explain why the "let's just subclass drm_atomic_state"
approach wasn't the greatest, and annotate all those functions as
deprecated in favour of more standardized driver private states. Also
note where we could/should extend driver private states going forward
(atm neither locking nor synchronization is handled in core/helpers,
which isn't really all that great).
v2: Spelling and phrasing improvements (Alex, DK).
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-5-daniel.vetter@ffwll.ch
Commit 669c9215af ("drm/atomic: Make async plane update checks work as
intended, v2.") assumed incorrectly that if only 1 plane is matched in
the loop, the variables will be set to that plane. In reality we reset
them to NULL every time a new plane was iterated. This behavior is
surprising, so fix this by making the for loops only assign the
variables on a match.
When we have not added all the planes/crtc/connector to the state, and
there's a few NULL ones after the last one we iterated, te assumption
is broken that the pointers will hold the values from the last loop
iteration, which holds true for all other for_each macros we're using.
Except of course the iterator pointer itself, but that one really is
entirely internal.
Cc: Dmitry Osipenko <digetx@gmail.com>
Fixes: 669c9215af ("drm/atomic: Make async plane update checks work as intended, v2.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927083532.5756-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Now that the last users have been converted, we can finally get rid of
for_each_obj_in_state, we have better macros to replace them with.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-8-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we neatly track the crtc state, but forget to look at
plane/connector state.
When doing a nonblocking modeset, immediately followed by a setprop
before the modeset completes, the setprop will see the modesets new
state as the old state and free it.
This has to be solved by waiting for hw_done on the connector, even
if it's not assigned to a crtc. When a connector is unbound we take
the last crtc commit, and when it stays unbound we create a new
fake crtc commit for that gets signaled on hw_done for all the
planes/connectors.
We wait for it the same way as we do for crtc's, which will make
sure we never run into a use-after-free situation.
Changes since v1:
- Only create a single disable commit. (danvet)
- Fix leak in intel_legacy_cursor_update.
Changes since v2:
- Make reference counting in drm_atomic_helper_setup_commit
more obvious. (pinchartl)
- Call cleanup_done for fake commit. (danvet)
- Add comments to drm_atomic_helper_setup_commit. (danvet, pinchartl)
- Add comment to drm_atomic_helper_swap_state. (pinchartl)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: kms_atomic_transition.plane-use-after-nonblocking-unbind*
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170904104838.23822-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Most code only cares about the current commit or previous commit.
Fortuantely we already have a place to track those. Move it to
drm_crtc_state where it belongs. :)
The per-crtc commit_list is kept for places where we have to look
deeper than the current or previous commit for checking whether to stall
on unpin. This is used in drm_atomic_helper_setup_commit and
intel_has_pending_fb_unpin.
Changes since v1:
- Update kerneldoc for drm_crtc.commit_list. (danvet)
Changes since v2:
- Remove drm_atomic_helper_async_check hunk. (pinchartl)
Changes since v3:
- Fix use-after-free in drm_atomic_helper_commit_cleanup_done().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170904150456.31049-1-maarten.lankhorst@linux.intel.com
[mlankhorst: preceeding -> preceding (checkpatch)]
It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_helper_connector_set_property.
The only special case is nouveau which used one function for both
pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
What is rather strange here is how few drivers set this up, I suspect
the earlier patch to handle properties in the core did end up fixing a
pile of possible issues.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.ch
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Make the atomic private object stuff less special by introducing proper
base classes for the object and its state. Drivers can embed these in
their own appropriate objects, after which these things will work
exactly like the plane/crtc/connector states during atomic operations.
v2: Reorder to not depend on drm_dynarray (Daniel)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712155102.26276-3-ville.syrjala@linux.intel.com
In some cases, like cursor updates, it is interesting to update the
plane in an asynchronous fashion to avoid big delays. The current queued
update could be still waiting for a fence to signal and thus block any
subsequent update until its scan out. In cases like this if we update the
cursor synchronously through the atomic API it will cause significant
delays that would even be noticed by the final user.
This patch creates a fast path to jump ahead the current queued state and
do single planes updates without going through all atomic steps in
drm_atomic_helper_commit(). We take this path for legacy cursor updates.
For now only single plane updates are supported, but we plan to support
multiple planes updates and async PageFlips through this interface as well
in the near future.
v6: - move check code to drm_atomic_helper.c (Daniel Vetter)
v5:
- improve comments (Eric Anholt)
v4:
- fix state->crtc NULL check (Archit Taneja)
v3:
- fix iteration on the wrong crtc state
- put back code to forbid updates if there is a queued update for
the same plane (Ville Syrjälä)
- move size checks back to drivers (Ville Syrjälä)
- move ASYNC_UPDATE flag addition to its own patch (Ville Syrjälä)
v2:
- allow updates even if there is a queued update for the same
plane.
- fixes on the documentation (Emil Velikov)
- unconditionally call ->atomic_async_update (Emil Velikov)
- check for ->atomic_async_update earlier (Daniel Vetter)
- make ->atomic_async_check() the last step (Daniel Vetter)
- add ASYNC_UPDATE flag (Eric Anholt)
- update state in core after ->atomic_async_update (Eric Anholt)
- update docs (Eric Anholt)
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> (v5)
Acked-by: Eric Anholt <eric@anholt.net> (v5)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630180322.29007-2-gustavo@padovan.org
It is necessary to track states for objects other than connector, crtc
and plane for atomic modesets. But adding objects like DP MST link
bandwidth to drm_atomic_state would mean that a non-core object will be
modified by the core helper functions for swapping and clearing
it's state. So, lets add void * objects and helper functions that operate
on void * types to keep these objects and states private to the core.
Drivers can then implement specific functions to swap and clear states.
The other advantage having just void * for these objects in
drm_atomic_state is that objects of different types can be managed in the
same state array.
v7: Use __for_each_private_obj to define for_each_private_obj (Maarten)
v6: More kernel-doc to keep 0-day happy
v5: Remove more NULL checks (Maarten)
v4: Avoid redundant NULL checks when private_objs array is empty (Maarten)
v3: Macro alignment (Chris)
v2: Added docs and new iterator to filter private objects (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492753893-3748-2-git-send-email-dhinakaran.pandiyan@intel.com
Currently we use a flag to change behavior in atomic commit
whether a conflicting encoder should be enabled or disabled.
This is used for the legacy set_config helper, which disables
connectors that have a conflicting encoder but not part of the
active crtc list.
There's no need for this to be handled in atomic commit, it
could be done in the set_config helper instead. This will
let the atomic check function reject any conflicting encoders,
while set_config can disable conflicting crtc's. This makes it
possible to recalculate the changed flags in 1 loop.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491477543-31257-2-git-send-email-maarten.lankhorst@linux.intel.com
Mostly because I want the links from the newly-added @state functions
to work. But I think explaining when they're useful and that the
implicit one is deprecated is good either way. Slightly repetitive
unfortunately.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-3-daniel.vetter@ffwll.ch
After atomic commit, these macros should be used in place of
get_existing_state. Also after commit get_xx_state should no longer
be used because it may not have the required locks.
The calls to drm_atomic_get_existing_$obj_state should no longer be
used, and converted over to these new calls.
Changes since v1:
- Expand commit message.
- Deprecate get_existing_*_state functions in the documentation.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
=VMy8
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc8' into drm-next
Linux 4.10-rc8
Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
Add for_each_(old)(new)_(plane,connector,crtc)_in_state iterators to
replace the old for_each_xxx_in_state ones. This is useful for >1 flip
depth and getting rid of all xxx->state dereferences.
This requires extra fixups done when committing a state after
duplicating, which in general isn't valid but is used by suspend/resume.
To handle these, introduce drm_atomic_helper_commit_duplicated_state
which performs those fixups before checking & committing the state.
Changes since v1:
- Remove nonblock parameter for commit_duplicated_state.
Changes since v2:
- Use commit_duplicated_state for i915 load detection.
- Add WARN_ON(old_state != obj->state) before swapping.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484559464-27107-2-git-send-email-maarten.lankhorst@linux.intel.com
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Eric.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
Currently if the userspace declares a int variable to store the out_fence
fd and pass it to OUT_FENCE_PTR the kernel will overwrite the 32 bits
above the int variable on 64 bits systems.
Fix this by making the internal storage of out_fence in the kernel a s32
pointer.
Reported-by: Chad Versace <chadversary@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes: beaf5af480 ("drm/fence: add out-fences support")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-and-Tested-by: Chad Versace <chadversary@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484317329-9293-1-git-send-email-gustavo@padovan.org
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i
Originally I wasnt a friend of this style because I thought a
line-break between the "&struct" and "foo" part would break it. But a
quick test shows that " * &struct \n * foo\n" works pefectly well with
current kernel-doc. So time to mass-apply these changes!
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
This check is useful for drivers that do not have DRIVER_ATOMIC set but
have atomic modesetting internally implemented. Wrap the check into a
function since this is used in many places and as a bonus, the function
name helps to document what the check is for.
v2:
Change return type to bool (Ville)
Move the function drm_atomic.h (Daniel)
Fixed comment marker for documentation
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[danvet: Move back to drmP.h because include hell.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482396643-32456-1-git-send-email-dhinakaran.pandiyan@intel.com
Stop relying on a per crtc_state last_vblank_count, we shouldn't touch
crtc_state after commit. Move it to atomic_state->crtcs.
Also stop re-using new_crtc_state->enable, we can now simply set a
bitmask with crtc_crtc_mask.
Changes since v1:
- Keep last_vblank_count in __drm_crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8e4759a4-24d3-3f80-bd1a-1e7a9c83b612@linux.intel.com
This is not driver interface stuff.
Fixes: 6559c901cb ("drm/atomic: add debugfs file to dump out atomic state")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-3-daniel.vetter@ffwll.ch
Lyude Paul