Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.
see: https://lkml.org/lkml/2016/8/2/1945
Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>
Miscellanea:
o Wrapped modified multi-line calls to a single line where appropriate
o Realign modified multi-line calls to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a loop block device encounters a writeback error, that error will
get propagated to the bd_inode's wb_err field. If we then detach the
backing file from it, attach another and fsync it, we'll get back the
writeback error that we had from the previous backing file.
This is a bit of a grey area as POSIX doesn't cover loop devices, but it
is somewhat counterintuitive.
If we detach a backing file from the loopdev while there are still
unreported errors, take it as a sign that we're no longer interested in
the previous file, and clear out the wb_err in the loop blockdev.
Reported-and-Tested-by: Theodore Y. Ts'o <tytso@mit.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We ran into an issue with loop and btrfs, where btrfs would complain about
checksum errors. It turns out that is because we don't handle short reads
at all, we just zero fill the remainder. Worse than that, we don't handle
the filling properly, which results in loop trying to advance a single
bio by much more than its size, since it doesn't take chaining into
account.
Handle short reads appropriately, by simply retrying at the new correct
offset. End the remainder of the request with EIO, if we get a 0 read.
Fixes: bc07c10a36 ("block: loop: support DIO & AIO")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can always get at the request from the payload, no need to store
a pointer to it.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 2d1d4c1e59 made loop_get_status() drop lo_ctx_mutex before
returning, but the loop_get_status_old(), loop_get_status64(), and
loop_get_status_compat() wrappers don't call loop_get_status() if the
passed argument is NULL. The callers expect that the lock is dropped, so
make sure we drop it in that case, too.
Reported-by: syzbot+31e8daa8b3fc129e75f2@syzkaller.appspotmail.com
Fixes: 2d1d4c1e59 ("loop: don't call into filesystem while holding lo_ctl_mutex")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RVhK
-----END PGP SIGNATURE-----
Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"It's a pretty quiet round this time, which is nice. This contains:
- series from Bart, cleaning up the way we set/test/clear atomic
queue flags.
- series from Bart, fixing races between gendisk and queue
registration and removal.
- set of bcache fixes and improvements from various folks, by way of
Michael Lyle.
- set of lightnvm updates from Matias, most of it being the 1.2 to
2.0 transition.
- removal of unused DIO flags from Nikolay.
- blk-mq/sbitmap memory ordering fixes from Omar.
- divide-by-zero fix for BFQ from Paolo.
- minor documentation patches from Randy.
- timeout fix from Tejun.
- Alpha "can't write a char atomically" fix from Mikulas.
- set of NVMe fixes by way of Keith.
- bsg and bsg-lib improvements from Christoph.
- a few sed-opal fixes from Jonas.
- cdrom check-disk-change deadlock fix from Maurizio.
- various little fixes, comment fixes, etc from various folks"
* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
blk-mq: Directly schedule q->timeout_work when aborting a request
blktrace: fix comment in blktrace_api.h
lightnvm: remove function name in strings
lightnvm: pblk: remove some unnecessary NULL checks
lightnvm: pblk: don't recover unwritten lines
lightnvm: pblk: implement 2.0 support
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: check for supported version
lightnvm: implement get log report chunk helpers
lightnvm: make address conversions depend on generic device
lightnvm: add support for 2.0 address format
lightnvm: normalize geometry nomenclature
lightnvm: complete geo structure with maxoc*
lightnvm: add shorten OCSSD version in geo
lightnvm: add minor version to generic geometry
lightnvm: simplify geometry structure
lightnvm: pblk: refactor init/exit sequences
lightnvm: Avoid validation of default op value
lightnvm: centralize permission check for lightnvm ioctl
...
Even after the previous patch to drop lo_ctl_mutex while calling
vfs_getattr(), there are other cases where we can end up sleeping for a
long time while holding lo_ctl_mutex. Let's avoid the uninterruptible
sleep from the ioctls.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hit an issue where a loop device on NFS was stuck in
loop_get_status() doing vfs_getattr() after the NFS server died, which
caused a pile-up of uninterruptible processes waiting on lo_ctl_mutex.
There's no reason to hold this lock while we wait on the filesystem;
let's drop it so that other processes can do their thing. We need to
grab a reference on lo_backing_file while we use it, and we can get rid
of the check on lo_device, which has been unnecessary since commit
a34c0ae9ebd6 ("[PATCH] loop: remove the bio remapping capability") in
the linux-history tree.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following commit:
commit aa4d86163e ("block: loop: switch to VFS ITER_BVEC")
replaced __do_lo_send_write(), which used ITER_KVEC iterators, with
lo_write_bvec() which uses ITER_BVEC iterators. In this change, though,
the WRITE flag was lost:
- iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len);
+ iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len);
This flag is necessary for the DAX case because we make decisions based on
whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and
in dax_iomap_rw().
We end up going through this path in configurations where we combine a PMEM
device with 4k sectors, a loopback device and DAX. The consequence of this
missed flag is that what we intend as a write actually turns into a read in
the DAX code, so no data is ever written.
The very simplest test case is to create a loopback device and try and
write a small string to it, then hexdump a few bytes of the device to see
if the write took. Without this patch you read back all zeros, with this
you read back the string you wrote.
For XFS this causes us to fail or panic during the following xfstests:
xfs/074 xfs/078 xfs/216 xfs/217 xfs/250
For ext4 we have a similar issue where writes never happen, but we don't
currently have any xfstests that use loopback and show this issue.
Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This
causes the xfstests to all pass.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Fixes: commit aa4d86163e ("block: loop: switch to VFS ITER_BVEC")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch has been generated as follows:
for verb in set_unlocked clear_unlocked set clear; do
replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
$(git grep -lw queue_flag_${verb} drivers block/bsg*)
done
Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename get_disk() to get_disk_and_module() to make sure what the
function does. It's not a great name but at least it is now clear that
put_disk() is not it's counterpart.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
范龙飞 reports that KASAN can report a use-after-free in __lock_acquire.
The reason is due to insufficient serialization in lo_release(), which
will continue to use the loop device even after it has decremented the
lo_refcnt to zero.
In the meantime, another process can come in, open the loop device
again as it is being shut down. Confusion ensues.
Reported-by: 范龙飞 <long7573@126.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code is only for blkcg not for all cgroups
Fixes: d4478e92d6 ("block/loop: make loop cgroup aware")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
loop block device handles IO in a separate thread. The actual IO
dispatched isn't cloned from the IO loop device received, so the
dispatched IO loses the cgroup context.
I'm ignoring buffer IO case now, which is quite complicated. Making the
loop thread aware cgroup context doesn't really help. The loop device
only writes to a single file. In current writeback cgroup
implementation, the file can only belong to one cgroup.
For direct IO case, we could workaround the issue in theory. For
example, say we assign cgroup1 5M/s BW for loop device and cgroup2
10M/s. We can create a special cgroup for loop thread and assign at
least 15M/s for the underlayer disk. In this way, we correctly throttle
the two cgroups. But this is tricky to setup.
This patch tries to address the issue. We record bio's css in loop
command. When loop thread is handling the command, we then use the API
provided in patch 1 to set the css for current task. The bio layer will
use the css for new IO (from patch 3).
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 6c6b6f28b3 ("loop: set physical block size to PAGE_SIZE")
caused mkfs.xfs to barf on ppc64 [1]. Always using PAGE_SIZE as the
physical block size still makes the most sense semantically, but let's
just lie and always set it to the same value as the logical block size
(same goes for io_min). In the future we might want to at least bump up
io_min to PAGE_SIZE but I'm sick of these stupid changes so let's play
it safe.
1: https://marc.info/?l=linux-xfs&m=150459024723753&w=2
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
lo_rw_aio->call_read_iter->
1 aops->direct_IO
2 iov_iter_revert
lo_rw_aio_complete could happen between 1 and 2, the bio and bvec could
be freed before 2, which accesses bvec.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently loop disables merge. While it makes sense for buffer IO mode,
directio mode can benefit from request merge. Without merge, loop could
send small size IO to underlayer disk and harm performance.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Loop can handle any size of request. Limiting it to 255 sectors just
burns the CPU for bio split and request merge for underlayer disk and
also cause bad fs block allocation in directio mode.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The comments here are really outdated, and blk-mq made flushing much
simpler, so just fold the two cases into the callers.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a different approach from the first attempt in f2c6df7dbf
("loop: support 4k physical blocksize"). Rather than extending
LOOP_{GET,SET}_STATUS, add a separate ioctl just for setting the block
size.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The physical block size is "the lowest possible sector size that the
hardware can operate on without reverting to read-modify-write
operations" (from the comment on blk_queue_physical_block_size()). Since
loop does buffered I/O on the backing file by default, the RMW unit is a
page. This isn't the case for direct I/O mode, but let's keep it simple.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is only used for setting the soft block size on the struct
block_device once and then never used again.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's some stuff still up in the air, let's not get stuck with a
subpar ABI. I'll follow up with something better for 4.14.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The early device registration made possible a race leading to allocations
of disks with wrong minors.
This patch moves the device registration further down the loop_init
function to make the race infeasible.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Volkov <avolkov@ispras.ru>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull read/write updates from Al Viro:
"Christoph's fs/read_write.c series - consolidation and cleanups"
* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: remove nfsd_vfs_read
nfsd: use vfs_iter_read/write
fs: implement vfs_iter_write using do_iter_write
fs: implement vfs_iter_read using do_iter_read
fs: move more code into do_iter_read/do_iter_write
fs: remove __do_readv_writev
fs: remove do_compat_readv_writev
fs: remove do_readv_writev
De-dupliate some code and allow for passing the flags argument to
vfs_iter_write. Additionally it now properly updates timestamps.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
De-dupliate some code and allow for passing the flags argument to
vfs_iter_read. Additional it properly updates atime now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When a filesystem is mounted from a loop device, writes are
throttled by balance_dirty_pages() twice: once when writing
to the filesystem and once when the loop_handle_cmd() writes
to the backing file. This double-throttling can trigger
positive feedback loops that create significant delays. The
throttling at the lower level is seen by the upper level as
a slow device, so it throttles extra hard.
The PF_LESS_THROTTLE flag was created to handle exactly this
circumstance, though with an NFS filesystem mounted from a
local NFS server. It reduces the throttling on the lower
layer so that it can proceed largely unthrottled.
To demonstrate this, create a filesystem on a loop device
and write (e.g. with dd) several large files which combine
to consume significantly more than the limit set by
/proc/sys/vm/dirty_ratio or dirty_bytes. Measure the total
time taken.
When I do this directly on a device (no loop device) the
total time for several runs (mkfs, mount, write 200 files,
umount) is fairly stable: 28-35 seconds.
When I do this over a loop device the times are much worse
and less stable. 52-460 seconds. Half below 100seconds,
half above.
When I apply this patch, the times become stable again,
though not as fast as the no-loop-back case: 53-72 seconds.
There may be room for further improvement as the total overhead still
seems too high, but this is a big improvement.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into for-4.13/block
We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.
Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the same values for use for request completion errors as the return
value from ->queue_rq. BLK_STS_RESOURCE is special cased to cause
a requeue, and all the others are completed as-is.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings. This patch
instead introduces a new blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning. Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.
For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.
blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
gcc points out an unusual indentation:
drivers/block/loop.c: In function 'loop_set_status':
drivers/block/loop.c:1149:3: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit,
^~
drivers/block/loop.c:1152:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
goto exit;
This was introduced by a new feature that accidentally moved the opening
braces from one condition to another. Adding a second pair of braces
makes it work correctly again and also more readable.
Fixes: f2c6df7dbf ("loop: support 4k physical blocksize")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
When generating bootable VM images certain systems (most notably
s390x) require devices with 4k blocksize. This patch implements
a new flag 'LO_FLAGS_BLOCKSIZE' which will set the physical
blocksize to that of the underlying device, and allow to change
the logical blocksize for up to the physical blocksize.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047 ("block: loop: improve performance via blk-mq").
Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.
Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done
Test output: stock patched
/dev/loop0 18.1217e-05 8.3842e-05
/dev/loop1 6.1114e-05 0.000147979
/dev/loop10 0.414701 0.000116564
/dev/loop11 0.7474 6.7942e-05
/dev/loop12 0.747986 8.9082e-05
/dev/loop13 0.746532 7.4799e-05
/dev/loop14 0.480041 9.3926e-05
/dev/loop15 1.26453 7.2522e-05
Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes: b5dd2f6047 ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>
Remove the request_idx parameter, which can't be used safely now that we
support I/O schedulers with blk-mq. Except for a superflous check in
mtip32xx it was unused anyway.
Also pass the tag_set instead of just the driver data - this allows drivers
to avoid some code duplication in a follow on cleanup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that all drivers that call blk_mq_complete_requests have a
->complete callback we can remove the direct call to blk_mq_end_request,
as well as the error argument to blk_mq_complete_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In thruth I've just audited which blk-mq drivers don't currently have a
complete callback, but I think this change is at least borderline useful.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It's identical to discard as hole punches will always leave us with
zeroes on reads.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Constify all instances of blk_mq_ops, as they are never modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Pull block layer fixes from Jens Axboe:
"A collection of fixes for this merge window, either fixes for existing
issues, or parts that were waiting for acks to come in. This pull
request contains:
- Allocation of nvme queues on the right node from Shaohua.
This was ready long before the merge window, but waiting on an ack
from Bjorn on the PCI bit. Now that we have that, the three patches
can go in.
- Two fixes for blk-mq-sched with nvmeof, which uses hctx specific
request allocations. This caused an oops. One part from Sagi, one
part from Omar.
- A loop partition scan deadlock fix from Omar, fixing a regression
in this merge window.
- A three-patch series from Keith, closing up a hole on clearing out
requests on shutdown/resume.
- A stable fix for nbd from Josef, fixing a leak of sockets.
- Two fixes for a regression in this window from Jan, fixing a
problem with one of his earlier patches dealing with queue vs bdi
life times.
- A fix for a regression with virtio-blk, causing an IO stall if
scheduling is used. From me.
- A fix for an io context lock ordering problem. From me"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Move bdi_unregister() to del_gendisk()
blk-mq: ensure that bd->last is always set correctly
block: don't call ioc_exit_icq() with the queue lock held for blk-mq
block: Initialize bd_bdi on inode initialization
loop: fix LO_FLAGS_PARTSCAN hang
nvme: Complete all stuck requests
blk-mq: Provide freeze queue timeout
blk-mq: Export blk_mq_freeze_queue_wait
nbd: stop leaking sockets
blk-mq: move update of tags->rqs to __blk_mq_alloc_request()
blk-mq: kill blk_mq_set_alloc_data()
blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request
blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset
nvme: allocate nvme_queue in correct node
PCI: add an API to get node from vector
blk-mq: allocate blk_mq_tags and requests in correct node
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs pile two from Al Viro:
- orangefs fix
- series of fs/namei.c cleanups from me
- VFS stuff coming from overlayfs tree
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: Use RCU for destroy_inode
vfs: use helper for calling f_op->fsync()
mm: use helper for calling f_op->mmap()
vfs: use helpers for calling f_op->{read,write}_iter()
vfs: pass type instead of fn to do_{loop,iter}_readv_writev()
vfs: extract common parts of {compat_,}do_readv_writev()
vfs: wrap write f_ops with file_{start,end}_write()
vfs: deny copy_file_range() for non regular files
vfs: deny fallocate() on directory
vfs: create vfs helper vfs_tmpfile()
namei.c: split unlazy_walk()
namei.c: fold the check for DCACHE_OP_REVALIDATE into d_revalidate()
lookup_fast(): clean up the logics around the fallback to non-rcu mode
namei: fold unlazy_link() into its sole caller
loop_reread_partitions() needs to do I/O, but we just froze the queue,
so we end up waiting forever. This can easily be reproduced with losetup
-P. Fix it by moving the reread to after we unfreeze the queue.
Fixes: ecdd09597a ("block/loop: fix race between I/O and set_status")
Reported-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix typos and add the following to the scripts/spelling.txt:
algined||aligned
While we are here, fix the "appplication" in the touched line in
drivers/block/loop.c. Also, fix the "may not naturally ..." to
"may not be naturally ..." in the touched line in mm/page_alloc.
Link: http://lkml.kernel.org/r/1481573103-11329-9-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
->queue_rq() should return one of the BLK_MQ_RQ_QUEUE_* constants, not
an errno.
f4aa4c7bba ("block: loop: convert to per-device workqueue")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
A good practice is to prefix the names of functions by the name
of the subsystem.
The kthread worker API is a mix of classic kthreads and workqueues. Each
worker has a dedicated kthread. It runs a generic function that process
queued works. It is implemented as part of the kthread subsystem.
This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:
__init_kthread_worker() -> __kthread_init_worker()
init_kthread_worker() -> kthread_init_worker()
init_kthread_work() -> kthread_init_work()
insert_kthread_work() -> kthread_insert_work()
queue_kthread_work() -> kthread_queue_work()
flush_kthread_work() -> kthread_flush_work()
flush_kthread_worker() -> kthread_flush_worker()
Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.
Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:
+ "init" in the function names stands for the verb "initialize"
aka "initialize worker". While "INIT" in the macro names
stands for the noun "INITIALIZER" aka "worker initializer".
+ INIT() macros are used only in DEFINE() macros
+ init() functions are used close to the other kthread()
functions. It looks much better if all the functions
use the same scheme.
+ There will be also kthread_destroy_worker() that will
be used close to kthread_cancel_work(). It is related
to the init() function. Again it looks better if all
functions use the same naming scheme.
+ there are several precedents for such init() function
names, e.g. amd_iommu_init_device(), free_area_init_node(),
jump_label_init_type(), regmap_init_mmio_clk(),
+ It is not an argument but it was inconsistent even before.
[arnd@arndb.de: fix linux-next merge conflict]
Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All drivers use the default, so provide an inline version of it. If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.
This provides better code generation, and better debugability as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix a fat-fingered conversion to the req_op accessors, and also
use a switch statement to make it more obvious what is being checked.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: c2df40 ("drivers: use req op accessor");
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
There is no error number returned if loop driver fails in function
alloc_disk to add new loop device. Add a correct error number to make
user notify in this case.
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The req operation REQ_OP is separated from the rq_flag_bits
definition. This converts the block layer drivers to
use req_op to get the op from the request struct.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We currently set REQ_WRITE/WRITE for all non READ IOs
like discard, flush, writesame, etc. In the next patches where we
no longer set up the op as a bitmap, we will not be able to
detect a operation direction like writesame by testing if REQ_WRITE is
set.
This patch converts the drivers and cgroup to use the
op_is_write helper. This should just cover the simple
cases. I did dm, md and bcache in their own patches
because they were more involved.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block driver updates from Jens Axboe:
"On top of the core pull request, this is the drivers pull request for
this merge window. This contains:
- Switch drivers to the new write back cache API, and kill off the
flush flags. From me.
- Kill the discard support for the STEC pci-e flash driver. It's
trivially broken, and apparently unmaintained, so it's safer to
just remove it. From Jeff Moyer.
- A set of lightnvm updates from the usual suspects (Matias/Javier,
and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei
Tao.
- A set of updates for NVMe:
- Turn the controller state management into a proper state
machine. From Christoph.
- Shuffling of code in preparation for NVMe-over-fabrics, also
from Christoph.
- Cleanup of the command prep part from Ming Lin.
- Rewrite of the discard support from Ming Lin.
- Deadlock fix for namespace removal from Ming Lin.
- Use the now exported blk-mq tag helper for IO termination.
From Sagi.
- Various little fixes from Christoph, Guilherme, Keith, Ming
Lin, Wang Sheng-Hui.
- Convert mtip32xx to use the now exported blk-mq tag iter function,
from Keith"
* 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits)
lightnvm: reserved space calculation incorrect
lightnvm: rename nr_pages to nr_ppas on nvm_rq
lightnvm: add is_cached entry to struct ppa_addr
lightnvm: expose gennvm_mark_blk to targets
lightnvm: remove mgt targets on mgt removal
lightnvm: pass dma address to hardware rather than pointer
lightnvm: do not assume sequential lun alloc.
nvme/lightnvm: Log using the ctrl named device
lightnvm: rename dma helper functions
lightnvm: enable metadata to be sent to device
lightnvm: do not free unused metadata on rrpc
lightnvm: fix out of bound ppa lun id on bb tbl
lightnvm: refactor set_bb_tbl for accepting ppa list
lightnvm: move responsibility for bad blk mgmt to target
lightnvm: make nvm_set_rqd_ppalist() aware of vblks
lightnvm: remove struct factory_blks
lightnvm: refactor device ops->get_bb_tbl()
lightnvm: introduce nvm_for_each_lun_ppa() macro
lightnvm: refactor dev->online_target to global nvm_targets
lightnvm: rename nvm_targets to nvm_tgt_type
...
Starting from commit e36f620428(block: split bios to max possible length),
block core starts to split bio in the middle of bvec.
Unfortunately loop dio/aio doesn't consider this situation, and
always treat 'iter.iov_offset' as zero. Then filesystem corruption
is observed.
This patch figures out the offset of the base bvevc via
'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset
to iov iterator.
Fixes: e36f620428 (block: split bios to max possible length)
Cc: Keith Busch <keith.busch@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org (4.5)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_mq_complete_request may be a no-op if the request has already
been completed by others means (e.g. a timeout or cancellation), but
currently drivers have to set rq->errors before calling
blk_mq_complete_request, which might leave us with the wrong error value.
Add an error parameter to blk_mq_complete_request so that we can
defer setting rq->errors until we known we won the race to complete the
request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
There are at least 3 advantages to use direct I/O and AIO on
read/write loop's backing file:
1) double cache can be avoided, then memory usage gets
decreased a lot
2) not like user space direct I/O, there isn't cost of
pinning pages
3) avoid context switch for obtaining good throughput
- in buffered file read, random I/O top throughput is often obtained
only if they are submitted concurrently from lots of tasks; but for
sequential I/O, most of times they can be hit from page cache, so
concurrent submissions often introduce unnecessary context switch
and can't improve throughput much. There was such discussion[1]
to use non-blocking I/O to improve the problem for application.
- with direct I/O and AIO, concurrent submissions can be
avoided and random read throughput can't be affected meantime
xfstests(-g auto, ext4) is basically passed when running with
direct I/O(aio), one exception is generic/232, but it failed in
loop buffered I/O(4.2-rc6-next-20150814) too.
Follows the fio test result for performance purpose:
4 jobs fio test inside ext4 file system over loop block
1) How to run
- KVM: 4 VCPUs, 2G RAM
- linux kernel: 4.2-rc6-next-20150814(base) with the patchset
- the loop block is over one image on SSD.
- linux psync, 4 jobs, size 1500M, ext4 over loop block
- test result: IOPS from fio output
2) Throughput(IOPS) becomes a bit better with direct I/O(aio)
-------------------------------------------------------------
test cases |randread |read |randwrite |write |
-------------------------------------------------------------
base |8015 |113811 |67442 |106978
-------------------------------------------------------------
base+loop aio |8136 |125040 |67811 |111376
-------------------------------------------------------------
- somehow, it should be caused by more page cache avaiable for
application or one extra page copy is avoided in case of direct I/O
3) context switch
- context switch decreased by ~50% with loop direct I/O(aio)
compared with loop buffered I/O(4.2-rc6-next-20150814)
4) memory usage from /proc/meminfo
-------------------------------------------------------------
| Buffers | Cached
-------------------------------------------------------------
base | > 760MB | ~950MB
-------------------------------------------------------------
base+loop direct I/O(aio) | < 5MB | ~1.6GB
-------------------------------------------------------------
- so there are much more page caches available for application with
direct I/O
[1] https://lwn.net/Articles/612483/
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
If loop block is mounted via 'mount -o loop', it isn't easy
to pass file descriptor opened as O_DIRECT, so this patch
introduces a new command to support direct IO for this case.
Cc: linux-api@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patches provides one interface for enabling direct IO
from user space:
- userspace(such as losetup) can pass 'file' which is
opened/fcntl as O_DIRECT
Also __loop_update_dio() is introduced to check if direct I/O
can be used on current loop setting.
The last big change is to introduce LO_FLAGS_DIRECT_IO flag
for userspace to know if direct IO is used to access backing
file.
Cc: linux-api@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The following patch will use dio/aio to submit IO to backing file,
then it needn't to schedule IO concurrently from work, so
use kthread_work for decreasing context switch cost a lot.
For non-AIO case, single thread has been used for long long time,
and it was just converted to work in v4.0, which has caused performance
regression for fedora live booting already. In discussion[1], even
though submitting I/O via work concurrently can improve random read IO
throughput, meantime it might hurt sequential read IO performance, so
better to restore to single thread behaviour.
For the following AIO support, it is better to use multi hw-queue
with per-hwq kthread than current work approach suppose there is so
high performance requirement for loop.
[1] http://marc.info/?t=143082678400002&r=1&w=2
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
It doesn't make sense to enable merge because the I/O
submitted to backing file is handled page by page.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Some drivers use it now, others just set the limits field manually.
But in preparation for splitting this into a hard and soft limit,
ensure that they all call the proper function for setting the hw
limit for discards.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
Pull block driver updates from Jens Axboe:
"This contains:
- a few race fixes for null_blk, from Akinobu Mita.
- a series of fixes for mtip32xx, from Asai Thambi and Selvan Mani at
Micron.
- NVMe:
* Fix for missing error return on allocation failure, from Axel
Lin.
* Code consolidation and cleanups from Christoph.
* Memory barrier addition, syncing queue count and queue
pointers. From Jon Derrick.
* Various fixes from Keith, an addition to support user
issue reset from sysfs or ioctl, and automatic namespace
rescan.
* Fix from Matias, avoiding losing some request flags when
marking the request failfast.
- small cleanups and sparse fixups for ps3vram. From Geert
Uytterhoeven and Geoff Lavand.
- s390/dasd dead code removal, from Jarod Wilson.
- a set of fixes and optimizations for loop, from Ming Lei.
- conversion to blkdev_reread_part() of loop, dasd, ndb. From Ming
Lei.
- updates to cciss. From Tomas Henzl"
* 'for-4.2/drivers' of git://git.kernel.dk/linux-block: (44 commits)
mtip32xx: Fix accessing freed memory
block: nvme-scsi: Catch kcalloc failure
NVMe: Fix IO for extended metadata formats
nvme: don't overwrite req->cmd_flags on sync cmd
mtip32xx: increase wait time for hba reset
mtip32xx: fix minor number
mtip32xx: remove unnecessary sleep in mtip_ftl_rebuild_poll()
mtip32xx: fix crash on surprise removal of the drive
mtip32xx: Abort I/O during secure erase operation
mtip32xx: fix incorrectly setting MTIP_DDF_SEC_LOCK_BIT
mtip32xx: remove unused variable 'port->allocated'
mtip32xx: fix rmmod issue
MAINTAINERS: Update ps3vram block driver
block/ps3vram: Remove obsolete reference to MTD
block/ps3vram: Fix sparse warnings
NVMe: Automatic namespace rescan
NVMe: Memory barrier before queue_count is incremented
NVMe: add sysfs and ioctl controller reset
null_blk: restart request processing on completion handler
null_blk: prevent timer handler running on a different CPU where started
...
gcc, righfully, complains:
drivers/block/loop.c:1369:1: warning: label 'out' defined but not used [-Wunused-label]
Kill it.
Signed-off-by: Jens Axboe <axboe@fb.com>
loop_clr_fd() can be run piggyback with lo_release(), and
under this situation, reread partition may always fail because
bd_mutex has been held already.
This patch detects the situation by the reference count, and
call __blkdev_reread_part() to avoid acquiring the lock again.
In the meantime, this patch switches to new kernel APIs
of blkdev_reread_part() and __blkdev_reread_part().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The lo_ctl_mutex is held for running all ioctl handlers, and
in some ioctl handlers, ioctl_by_bdev(BLKRRPART) is called for
rereading partitions, which requires bd_mutex.
So it is easy to cause failure because trylock(bd_mutex) may
fail inside blkdev_reread_part(), and follows the lock context:
blkid or other application:
->open()
->mutex_lock(bd_mutex)
->lo_open()
->mutex_lock(lo_ctl_mutex)
losetup(set fd ioctl):
->mutex_lock(lo_ctl_mutex)
->ioctl_by_bdev(BLKRRPART)
->trylock(bd_mutex)
This patch trys to eliminate the ABBA lock dependency by removing
lo_ctl_mutext in lo_open() with the following approach:
1) make lo_refcnt as atomic_t and avoid acquiring lo_ctl_mutex in lo_open():
- for open vs. add/del loop, no any problem because of loop_index_mutex
- freeze request queue during clr_fd, so I/O can't come until
clearing fd is completed, like the effect of holding lo_ctl_mutex
in lo_open
- both open() and release() have been serialized by bd_mutex already
2) don't hold lo_ctl_mutex for decreasing/checking lo_refcnt in
lo_release(), then lo_ctl_mutex is only required for the last release.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If there are too many pending per work I/O, too many
high priority work thread can be generated so that
system performance can be effected.
This patch limits the max_active parameter of workqueue as 16.
This patch fixes Fedora 22 live booting performance
regression when it is booted from squashfs over dm
based on loop, and looks the following reasons are
related with the problem:
- not like other filesyststems(such as ext4), squashfs
is a bit special, and I observed that increasing I/O jobs
to access file in squashfs only improve I/O performance a
little, but it can make big difference for ext4
- nested loop: both squashfs.img and ext3fs.img are mounted
as loop block, and ext3fs.img is inside the squashfs
- during booting, lots of tasks may run concurrently
Fixes: b5dd2f6047
Cc: stable@vger.kernel.org (v4.0)
Cc: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Documentation/workqueue.txt:
If there is dependency among multiple work items used
during memory reclaim, they should be queued to separate
wq each with WQ_MEM_RECLAIM.
Loop devices can be stacked, so we have to convert to per-device
workqueue. One example is Fedora live CD.
Fixes: b5dd2f6047
Cc: stable@vger.kernel.org (v4.0)
Cc: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Because of the peculiar way that md devices are created (automatically
when the device node is opened), a new device can be created and
registered immediately after the
blk_unregister_region(disk_devt(disk), disk->minors);
call in del_gendisk().
Therefore it is important that all visible artifacts of the previous
device are removed before this call. In particular, the 'bdi'.
Since:
commit c4db59d31e
Author: Christoph Hellwig <hch@lst.de>
fs: don't reassign dirty inodes to default_backing_dev_info
moved the
device_unregister(bdi->dev);
call from bdi_unregister() to bdi_destroy() it has been quite easy to
lose a race and have a new (e.g.) "md127" be created after the
blk_unregister_region() call and before bdi_destroy() is ultimately
called by the final 'put_disk', which must come after del_gendisk().
The new device finds that the bdi name is already registered in sysfs
and complains
> [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70()
> [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127'
We can fix this by moving the bdi_destroy() call out of
blk_release_queue() (which can happen very late when a refcount
reaches zero) and into blk_cleanup_queue() - which happens exactly when the md
device driver calls it.
Then it is only necessary for md to call blk_cleanup_queue() before
del_gendisk(). As loop.c devices are also created on demand by
opening the device node, we make the same change there.
Fixes: c4db59d31e
Reported-by: Azat Khuzhin <a3at.mail@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org (v4.0)
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Looks like we pull it in through other ways on x86, but we fail
on sparc:
In file included from drivers/block/cryptoloop.c:30:0:
drivers/block/loop.h:63:24: error: field 'tag_set' has incomplete type
struct blk_mq_tag_set tag_set;
Add the include to loop.h, kill it from loop.c.
Signed-off-by: Jens Axboe <axboe@fb.com>
block core handles REQ_FUA by its flush state machine, so
won't do it in loop explicitly.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
No behaviour change, just move the handling for REQ_DISCARD
and REQ_FLUSH in these two functions.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The conversion is a bit straightforward, and use work queue to
dispatch requests of loop block, and one big change is that requests
is submitted to backend file/device concurrently with work queue,
so throughput may get improved much. Given write requests over same
file are often run exclusively, so don't handle them concurrently for
avoiding extra context switch cost, possible lock contention and work
schedule cost. Also with blk-mq, there is opportunity to get loop I/O
merged before submitting to backend file/device.
In the following test:
- base: v3.19-rc2-2041231
- loop over file in ext4 file system on SSD disk
- bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1
- throughput: IOPS
------------------------------------------------------
| | base | base with loop-mq | delta |
------------------------------------------------------
| randread | 1740 | 25318 | +1355%|
------------------------------------------------------
| read | 42196 | 51771 | +22.6%|
-----------------------------------------------------
| randwrite | 35709 | 34624 | -3% |
-----------------------------------------------------
| write | 39137 | 40326 | +3% |
-----------------------------------------------------
So loop-mq can improve throughput for both read and randread, meantime,
performance of write and randwrite isn't hurted basically.
Another benefit is that loop driver code gets simplified
much after blk-mq conversion, and the patch can be thought as
cleanup too.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Discard requests are ignored if the encryption is enabled for the given
loop device. Update comment to match the code, and similar comments
elsewhere in the file.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More prep work for immutable biovecs - with immutable bvecs drivers
won't be able to use the biovec directly, they'll need to use helpers
that take into account bio->bi_iter.bi_bvec_done.
This updates callers for the new usage without changing the
implementation yet.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: Jim Paris <jim@jtan.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: support@lsi.com
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: drbd-user@lists.linbit.com
Cc: nbd-general@lists.sourceforge.net
Cc: cbe-oss-dev@lists.ozlabs.org
Cc: xen-devel@lists.xensource.com
Cc: virtualization@lists.linux-foundation.org
Cc: linux-raid@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: DL-MPTFusionLinux@lsi.com
Cc: linux-scsi@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: linux-fsdevel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: linux-mm@kvack.org
Acked-by: Geoff Levand <geoff@infradead.org>
Joe Perches