With CONFIG_KPROBES enabled two section are getting created which
leads to below build break.
LOG:
AS arch/arm/kernel/entry-armv.o
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:431: Error: symbol ret_from_exception is in a different section
arch/arm/kernel/entry-armv.S:490: Error: symbol ret_from_exception is in a different section
arch/arm/kernel/entry-armv.S:491: Error: symbol __und_usr_unknown is in a different section
This was introduced by commit 4260415f6a
Reported-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The following patch removes the default from the Kconfig entry for sierra_net
driver as recommended.
Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Rory Filer <rfiler@sierrawireless.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case a reset is performed, rtl8169_rx_interrupt() is called from
process context instead of softirq context. Special care must be taken
to call appropriate network core services (netif_rx() instead of
netif_receive_skb()). VLAN handling also corrected.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Diagnosed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upstream PV guests fail to boot because of a NULL pointer in
irq_force_complete_move(). It is possible that xen guests have
irq_desc->chip_data = NULL.
Test for NULL chip_data pointer before attempting to complete an irq move.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
LKML-Reference: <20100427152434.16193.49104.sendpatchset@prarit.bos.redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org> [2.6.33]
when we fall back to buffered write from direct write, we call
__generic_file_aio_write() but that will end up doing direct write
even we are only prepared to do buffered write because the file
has the O_DIRECT flag set. This is a fix for
https://bugzilla.novell.com/show_bug.cgi?id=591039
revised with Joel's comments.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits)
MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump
MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds.
MIPS: Loongson 2F: Enable fixups of the latest binutils
MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS
MIPS: Kconfig: Make Broadcom SoC support naming consistent
MIPS: BCM63xx: Update defconfig
MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m
STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware.
NET: mdio-octeon: Enable the hardware before using it.
I2C: Fix section mismatch errors in i2c-octeon.c
MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro.
MIPS: Loongson: Fix phys_mem_access_prot() check
MIPS: Loongson: Fix find_vga_mem_init()
MIPS: Loongson: Fix typo in gdium mach type string.
MIPS: Use CKSEG1ADDR for uncached handler
MIPS: Check for accesses beyond the end of the PGD.
MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.c
MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm.
MIPS: die() does not call die notifier chain
MIPS: Swarm, Littlesur: Enable PATA platform driver.
...
The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed
the out-of-order issue of Loongson-2F described in chapter 15 of the
Loongson2F User Manual [1, 2], but introduced some problems.
The option changes all of the jump target to "addr & 0xcfffffff" through the
at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is
wrong. Avoids the problem via telling the assembler to not use the $at
register.
[1] Loongson2F User Manual (Chinese Version)
http://www.loongson.cn/uploadfile/file/200808211
[2] English Version of Chapter 15:
http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source
Reported-and-tested-by: Liu Shiwei <liushiwei@gmail.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1109/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With the "Fixups of Loongson2F" patch [1] having been applied to binutils
for binutils 2.20.1 we now can use it's time to enable the options provided
by the patch to compile the kernel.
Without these fixups, the system may hang if the erratum is triggered.
For more information on these fixups please refer to the following
references.
[1] "Fixups of Loongson2F" patch for binutils(actually for gas)
http://sourceware.org/ml/binutils/2009-11/msg00387.html
[2] Chapter 15 of "Loongson2F User Manual"(Chinese Version)
http://www.loongson.cn/uploadfile/file/200808211
[3] Chapter 15 of the English version Loongson 2F User Manual
http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source
Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1106/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As documented in the Loongson 2F User Manual [2, 3], the old Loongson2F
series (2F01 / 2F02) have the NOP & JUMP issues which requires workarounds
in the kernel and binutils. This issue has been rectified in Loongson 2F
series 2F03 so no workarounds needed.
Now that the workarounds [1] adding the the -mfix-loongson2f-nop and
-mfix-loongson2f-jump options have been comitted to the binutils the CVS
repository), we can add the workarounds in the kernel.
The workarounds have no significant side effect on the system but may
decrease performance so we control them through a a new
CPU_LOONGSON2F_WORKAROUNDS config option allowing the users to only enable
it as necessary.
[1] "Fixups of Loongson2F" patch for binutils(actually for gas)
http://sourceware.org/ml/binutils/2009-11/msg00387.html
[2] Chapter 15 of "Loongson2F User Manual"(Chinese Version)
http://www.loongson.cn/uploadfile/file/200808211
[3] English Version of the above chapter 15
http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1105/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
the defconfig was out-of-sync since 2.6.30-rc6, update it with the new
symbols and enable BCM6338, 6345, wireless, b43 driver and LEDs support.
Signed-off-by: Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1081/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When the oprofile is compiled as a module do_IRQ() is not called in
arch/mips/loongson/lemote-2f/irq.c due to a wrong #ifdef there.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1143/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In some cases the mdio bus is not enabled at the time of probing.
This prevents anything from working, so we will enable it before
trying to use it, and disable it when the driver is removed.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/1090/
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There's a typo in the LOONGSON_ADDRWIN_CFG macro. The cpu window mmap
register address should contain the destination parameters not the
source one. This has not been noticed because the code is only using
source = destination.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1162/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The check used to determine if uncached accelerated should be used or not
is wrong. The parenthesis are misplaced and making the test fail.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1161/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
"MIPS: Calculate proper ebase value for 64-bit kernels"
9af43ea080dd5d6c7b34f38261780e5dd43537bc (lmo) rsp.
f6be75d03c (kernel.org) broke some 64-bit
MIPS systems.
Before this we were using XKPHYS/cached as ebase and computed the uncached
xphsys/unchached address for that area. After that commit ebase became a
32-bit compat address and convert does not work anymore. We now should use
CKSEG1 for this. CKSEG1ADDR does just that in 32-bit and 64-bit.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
To: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
For some combinations of PAGE_SIZE and vmbits, it is possible to have
userspace access that are beyond what is covered by the PGD, but within
vmbits. Such an access would cause the TLB refill handler to load garbage
values for PMD and PTE potentially giving userspace access to parts of the
physical address space to which it is not entitled.
In the TLB refill hot path, we add a single dsrl instruction so we can
check if any bits outside of the range covered by the PGD are set. In
the vmalloc side we then separate the bad case from the normal vmalloc
case and call tlb_do_page_fault_0 if warranted. This slows us down a
bit, but has the benefit of yielding deterministic behavior.
[Ralf: Fixed build error for 32-bit kernels.]
[Ralf: Folded lmo commit c8c0e22b2aa3982852b44279638ef37f9aa31b7d into this
commit.]
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1152/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
This makes the code somewhat cleaner while reducing the risk of shift
amount overflows when various page table related options are changed.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1154/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This allows us to clean up the code by not having to explicitly code
checks for shift amounts greater than 32.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1153/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS implementation of die() forgets to call notify_die() and thus notifiers
registered via register_die_notifier() are not called. This results in kgdb not
being activated on exceptions.
The only subtlety is that notify_die declares its regs argument w/o const, so
the const had to be removed from mips die() as well.
[Ralf: Fixed build error for SGI IP22 and IP28 platforms.]
Signed-off-by: Yury Polyanskiy <ypolyans@princeton.edu>
Cc: linux-mips@linux-mips.org
Patchworks: http://patchwork.linux-mips.org/patch/1142/
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
According to include/asm/sibyte/swarm.h both systems provide a
platform device for the ide controler. Until now the IDE subsystem was
used which is deprecated by now. The same structure can be used with the
PATA driver.
Signed-off-by: Sebastian Andrzej Siewior <sebatian@breakpoint.cc>
Cc: tbm@cyrius.com
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1127/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Same issues as SD card detection: One of both is always triggering and the
handlers take care to shut it up and enable the other. To avoid messages
about "unbalanced interrupt enable/disable" they must not be automatically
enabled when initally requested.
This was not an issue with the db1200_defconfig due to fortunate timings;
on a build without network chip support the warnings appear.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1133/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| arch/mips/pci/pci-sb1250.c: In function sb1250_pcibios_init:
| arch/mips/pci/pci-sb1250.c:257: warning: assignment makes integer from pointer without a cast
| arch/mips/pci/pci-sb1250.c:285: error: MAX_NR_CONSOLES undeclared (first use in this function)
| arch/mips/pci/pci-sb1250.c:285: error: (Each undeclared identifier is reported only once
| arch/mips/pci/pci-sb1250.c:285: error: for each function it appears in.)
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1136/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|arch/mips/sibyte/swarm/setup.c:153:
| warning: large integer implicitly truncated to unsigned type
The field was changed in d9b26352 aka ("x86, setup: Store the boot
cursor state"). This patch changes the values back they way they were
before this extra field got introduced.
While here, the other two boards are also converted to C99 initializer.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1137/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In the 64-bit kernel we use swapper_pg_dir for three different things.
1) xuseg mappings for kernel threads.
2) vmap mappings for all kernel-space accesses in xkseg.
3) vmap mappings for kernel modules in ksseg (kseg2).
Due to how the TLB refill handlers work, any mapping established in
xkseg or ksseg will also establish a xuseg mapping that should never
be used by the kernel.
In order to be able to use exceptions to trap NULL pointer
dereferences, we need to ensure that nothing is mapped at address
zero. Since vmap mappings in xkseg are reflected in xuseg, this means
we need to ensure that there are no vmap mappings established at the
start of xkseg. So we move back VMALLOC_START to avoid establishing
vmap mappings at the start of xkseg.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1129/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This enables autoloading of the TXx9 sound driver on RBTX4927.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
To: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Linux MIPS Mailing List <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1101/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 5a0e3ad6af
Author: Tejun Heo <tj@kernel.org>
Date: Wed Mar 24 17:04:11 2010 +0900
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
Since a while the few headers included don't drag in <linux/kernel.h>
anymore, thus no more prototype of printk() resulting in:
CC arch/mips/nxp/pnx8550/common/reset.o
/home/ralf/src/linux/upstream-linus/arch/mips/nxp/pnx8550/common/reset.c: In function 'pnx8550_machine_restart':
/home/ralf/src/linux/upstream-linus/arch/mips/nxp/pnx8550/common/reset.c:31: error: implicit declaration of function 'printk'
/home/ralf/src/linux/upstream-linus/arch/mips/nxp/pnx8550/common/reset.c:33: error: 'NULL' undeclared (first use in this function)
/home/ralf/src/linux/upstream-linus/arch/mips/nxp/pnx8550/common/reset.c:33: error: (Each undeclared identifier is reported only once
/home/ralf/src/linux/upstream-linus/arch/mips/nxp/pnx8550/common/reset.c:33: error: for each function it appears in.)
make[3]: *** [arch/mips/nxp/pnx8550/common/reset.o] Error 1
Fixed by including <linux/kernel.h>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 6f461f6c7c
("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata")
oopses on one of my ppc64 boxes with a NULL pointer (0x4a):
Unable to handle kernel paging request for data at address 0x0000004a
Faulting instruction address: 0xc0000000004d2f1c
cpu 0xe: Vector: 300 (Data Access) at [c000000bec1833a0]
pc: c0000000004d2f1c: .e1000e_disable_aspm+0xe0/0x150
lr: c0000000004d2f0c: .e1000e_disable_aspm+0xd0/0x150
dar: 4a
[c000000bec1836d0] c00000000069b9d8 .e1000_probe+0x84/0xe8c
[c000000bec1837b0] c000000000386d90 .local_pci_probe+0x4c/0x68
[c000000bec183840] c0000000003872ac .pci_device_probe+0xfc/0x148
[c000000bec183900] c000000000409e8c .driver_probe_device+0xe4/0x1d0
[c000000bec1839a0] c00000000040a024 .__driver_attach+0xac/0xf4
[c000000bec183a40] c000000000409124 .bus_for_each_dev+0x9c/0x10c
[c000000bec183b00] c000000000409c1c .driver_attach+0x40/0x60
[c000000bec183b90] c0000000004085dc .bus_add_driver+0x150/0x328
[c000000bec183c40] c00000000040a58c .driver_register+0x100/0x1c4
[c000000bec183cf0] c00000000038764c .__pci_register_driver+0x78/0x128
Seems like pdev->bus->self == NULL. I haven't touched pci in a long time
so I'm trying to remember what this means (no pcie bridge perhaps?)
The patch below fixes the oops for me.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: vme: Re-introduce necessary brackets
Staging: iio: fix up the iio_get_new_idr_val comment
Staging: add Add Sitecom WL-349 to rtl8192su
Staging: rt2860: add Belkin F5D8055 Wireless-N USB Dongle device id
staging: rtl8192su: add Support for Belkin F5D8053 v6
Staging: dt3155: fix 50Hz configuration
staging: usbip: Fix deadlock
Staging: rtl8192su: add USB ID for 0bda:8171
Staging: hv: name network device ethX rather than sethX
Staging: hv: Fix up memory leak on HvCleanup
Staging: hv: Fix a bug affecting IPv6
staging: iio: ring_sw: Fix incorrect test on successful read of last value, causes infinite loop
staging: iio: Function iio_get_new_idr_val() return negative value if fails.
Staging: iio: adc: fix dangling pointers
Staging: iio: light: fix dangling pointers
Staging: iio: test for failed allocation
staging: iio: lis3l02dq - incorrect ws used in container of call.
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits)
USB: sl811-hcd: Fix device disconnect
USB: ohci-at91: fix power management hanging
USB: rename usb_buffer_alloc() and usb_buffer_free()
USB: ti_usb: fix printk format warning
USB: gadget: s3c-hsotg: Add missing unlock
USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not set
USB: oxu210hp: release spinlock on error path
USB: serial: option: add cinterion device id
USB: serial: option: ZTEAC8710 Support with Device ID 0xffff
USB: serial: pl2303: Hybrid reader Uniform HCR331
USB: option: add ID for ZTE MF 330
USB: xhci: properly set endpoint context fields for periodic eps.
USB: xhci: properly set the "Mult" field of the endpoint context.
USB: OHCI: don't look at the root hub to get the number of ports
USB: don't choose configs with no interfaces
USB: cdc-acm: add another device quirk
USB: fix testing the wrong variable in fs_create_by_name()
usb: Fix tusb6010 for DMA API
musb_core: fix musb_init_controller() error cleanup path
MUSB: fix DaVinci glue layer dependency
...
CONFIG_INOTIFY_USER defined but CONFIG_ANON_INODES undefined will result
in the following build failure:
LD vmlinux
fs/built-in.o: In function 'sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): undefined reference to 'anon_inode_getfd'
fs/built-in.o: In function `sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): relocation truncated to fit: R_MIPS_26 against 'anon_inode_getfd'
make[2]: *** [vmlinux] Error 1
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
spi: spidev_test gives error upon 1-byte transfer
omap2_mcspi: small fixes of output data format
omap2_mcspi: Flush posted writes
spi: spi_device memory should be released instead of device.
spi: release device claimed by bus_find_device_by_name
of: check for IS_ERR()
serial/mpc52xx_uart: Drop outdated comments
gpio: potential null dereference
Somehow I managed to remove a set of rather necessary brackets in commit
29848ac9f3. Put them back.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
improve the comment a bit
Cc: Greg KH <greg@kroah.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add Belkin F5D8055 Wireless-N USB support to the rt2870
staging driver.
Signed-off-by: Chris Largret <largret@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Please find attached a patch which adds the device ID for the Belkin
F5D8053 v6 to the rtl8192su driver. I've tested this in 2.6.34-rc3
(Ubuntu 9.10 amd64) and the network adapter is working flawlessly.
Signed-off-by: Richard Airlie <richard@backtrace.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
According to the header file, dt3155_io.h, the 50/60 Hz configuration
is controlled by a bit in the I2C CSR2 register (bit 2). The function
dt3155_init_isr actually reads the I2C CONFIG register into the global
I2C_CSR union variable then modifies the bit. It then does a write
to the I2C CONFIG register with the global I2C_CONFIG union variable
which is not even set with a value anywhere in the driver.
My guess is 50Hz operation doesn't even work as-is.
Fix this by actually reading and writing the correct register with
the correct value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When detaching a port from the client side (usbip --detach 0),
the event thread, on the server side, is going to deadlock.
The "eh" server thread is getting USBIP_EH_RESET event and calls:
-> stub_device_reset() -> usb_reset_device()
the USB framework is then calling back _in the same "eh" thread_ :
-> stub_disconnect() -> usbip_stop_eh() -> wait_for_completion()
the "eh" thread is being asleep forever, waiting for its own completion.
This patch checks if "eh" is the current thread, in usbip_stop_eh().
Signed-off-by: Eric Lescouet <eric@lescouet.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Santosh Shilimkar