Commit Graph

1332 Commits

Author SHA1 Message Date
Thomas Gleixner cba6437a18 genirq/proc: Reject invalid affinity masks (again)
Qian Cai reported that the WARN_ON() in the x86/msi affinity setting code,
which catches cases where the affinity setting is not done on the CPU which
is the current target of the interrupt, triggers during CPU hotplug stress
testing.

It turns out that the warning which was added with the commit addressing
the MSI affinity race unearthed yet another long standing bug.

If user space writes a bogus affinity mask, i.e. it contains no online CPUs,
then it calls irq_select_affinity_usr(). This was introduced for ALPHA in

  eee45269b0 ("[PATCH] Alpha: convert to generic irq framework (generic part)")

and subsequently made available for all architectures in

  1840475676 ("genirq: Expose default irq affinity mask (take 3)")

which introduced the circumvention of the affinity setting restrictions for
interrupt which cannot be moved in process context.

The whole exercise is bogus in various aspects:

  1) If the interrupt is already started up then there is absolutely
     no point to honour a bogus interrupt affinity setting from user
     space. The interrupt is already assigned to an online CPU and it
     does not make any sense to reassign it to some other randomly
     chosen online CPU.

  2) If the interupt is not yet started up then there is no point
     either. A subsequent startup of the interrupt will invoke
     irq_setup_affinity() anyway which will chose a valid target CPU.

So the only correct solution is to just return -EINVAL in case user space
wrote an affinity mask which does not contain any online CPUs, except for
ALPHA which has it's own magic sauce for this.

Fixes: 1840475676 ("genirq: Expose default irq affinity mask (take 3)")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lkml.kernel.org/r/878sl8xdbm.fsf@nanos.tec.linutronix.de
2020-02-14 09:43:17 +01:00
Linus Torvalds 1a2a76c268 A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
    configured in legacy mode. This is caused by an ordering issue
    introduced in the recent changes which skip PIT initialization when the
    TSC and APIC frequencies are already known.
 
  - Handle malformed SRAT tables during early ACPI parsing which caused an
    infinite loop anda boot hang.
 
  - Fix a long standing race in the affinity setting code which affects PCI
    devices with non-maskable MSI interrupts. The problem is caused by the
    non-atomic writes of the MSI address (destination APIC id) and data
    (vector) fields which the device uses to construct the MSI message. The
    non-atomic writes are mandated by PCI.
 
    If both fields change and the device raises an interrupt after writing
    address and before writing data, then the MSI block constructs a
    inconsistent message which causes interrupts to be lost and subsequent
    malfunction of the device.
 
    The fix is to redirect the interrupt to the new vector on the current
    CPU first and then switch it over to the new target CPU. This allows to
    observe an eventually raised interrupt in the transitional stage (old
    CPU, new vector) to be observed in the APIC IRR and retriggered on the
    new target CPU and the new vector. The potential spurious interrupts
    caused by this are harmless and can in the worst case expose a buggy
    driver (all handlers have to be able to deal with spurious interrupts as
    they can and do happen for various reasons).
 
  - Add the missing suspend/resume mechanism for the HYPERV hypercall page
    which prevents resume hibernation on HYPERV guests. This change got
    lost before the merge window.
 
  - Mask the IOAPIC before disabling the local APIC to prevent potentially
    stale IOAPIC remote IRR bits which cause stale interrupt lines after
    resume.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5AEJwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoWY2D/47ur9gsVQGryKzneVAr0SCsq4Un11e
 uifX4ldu4gCEBRTYhpgcpiFKeLvY/QJ6uOD+gQUHyy/s+lCf6yzE6UhXEqSCtcT7
 LkSxD8jAFf6KhMA6iqYBfyxUsPMXBetLjjHWsyc/kf15O/vbYm7qf05timmNZkDS
 S7C+yr3KRqRjLR7G7t4twlgC9aLcNUQihUdsH2qyTvjnlkYHJLDa0/Js7bFYYKVx
 9GdUDLvPFB1mZ76g012De4R3kJsWitiyLlQ38DP5VysKulnszUCdiXlgCEFrgxvQ
 OQhLafQzOAzvxQmP+1alODR0dmJZA8k0zsDeeTB/vTpRvv6+Pe2qUswLSpauBzuq
 TpDsrv8/5pwZh28+91f/Unk+tH8NaVNtGe/Uf+ePxIkn1nbqL84o4NHGplM6R97d
 HAWdZQZ1cGRLf6YRRJ+57oM/5xE3vBbF1Wn0+QDTFwdsk2vcxuQ4eB3M/8E1V7Zk
 upp8ty50bZ5+rxQ8XTq/eb8epSRnfLoBYpi4ux6MIOWRdmKDl40cDeZCzA2kNP7m
 qY1haaRN3ksqvhzc0Yf6cL+CgvC4ur8gRHezfOqmBzVoaLyVEFIVjgjR/ojf0bq8
 /v+L9D5+IdIv4jEZruRRs0gOXNDzoBbvf0qKGaO0tUTWiDsv7c5AGixp8aozniHS
 HXsv1lIpRuC7WQ==
 =WxKD
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Ensure that the PIT is set up when the local APIC is disable or
     configured in legacy mode. This is caused by an ordering issue
     introduced in the recent changes which skip PIT initialization when
     the TSC and APIC frequencies are already known.

   - Handle malformed SRAT tables during early ACPI parsing which caused
     an infinite loop anda boot hang.

   - Fix a long standing race in the affinity setting code which affects
     PCI devices with non-maskable MSI interrupts. The problem is caused
     by the non-atomic writes of the MSI address (destination APIC id)
     and data (vector) fields which the device uses to construct the MSI
     message. The non-atomic writes are mandated by PCI.

     If both fields change and the device raises an interrupt after
     writing address and before writing data, then the MSI block
     constructs a inconsistent message which causes interrupts to be
     lost and subsequent malfunction of the device.

     The fix is to redirect the interrupt to the new vector on the
     current CPU first and then switch it over to the new target CPU.
     This allows to observe an eventually raised interrupt in the
     transitional stage (old CPU, new vector) to be observed in the APIC
     IRR and retriggered on the new target CPU and the new vector.

     The potential spurious interrupts caused by this are harmless and
     can in the worst case expose a buggy driver (all handlers have to
     be able to deal with spurious interrupts as they can and do happen
     for various reasons).

   - Add the missing suspend/resume mechanism for the HYPERV hypercall
     page which prevents resume hibernation on HYPERV guests. This
     change got lost before the merge window.

   - Mask the IOAPIC before disabling the local APIC to prevent
     potentially stale IOAPIC remote IRR bits which cause stale
     interrupt lines after resume"

* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Mask IOAPIC entries when disabling the local APIC
  x86/hyperv: Suspend/resume the hypercall page for hibernation
  x86/apic/msi: Plug non-maskable MSI affinity race
  x86/boot: Handle malformed SRAT tables during early ACPI parsing
  x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
2020-02-09 12:11:12 -08:00
Stephen Boyd f9f21cea31 genirq: Clarify that irq wake state is orthogonal to enable/disable
There's some confusion around if an irq that's disabled with disable_irq()
can still wake the system from sleep states such as "suspend to RAM".

Clarify this in the kernel documentation for irq_set_irq_wake() so that
it's clear that an irq can be disabled and still wake the system if it has
been marked for wakeup.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200206191521.94559-1-swboyd@chromium.org
2020-02-07 21:37:08 +01:00
Alexey Dobriyan 97a32539b9 proc: convert everything to "struct proc_ops"
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.

Conversion rule is:

	llseek		=> proc_lseek
	unlocked_ioctl	=> proc_ioctl

	xxx		=> proc_xxx

	delete ".owner = THIS_MODULE" line

[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
  Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 03:05:26 +00:00
Thomas Gleixner 6f1a4891a5 x86/apic/msi: Plug non-maskable MSI affinity race
Evan tracked down a subtle race between the update of the MSI message and
the device raising an interrupt internally on PCI devices which do not
support MSI masking. The update of the MSI message is non-atomic and
consists of either 2 or 3 sequential 32bit wide writes to the PCI config
space.

   - Write address low 32bits
   - Write address high 32bits (If supported by device)
   - Write data

When an interrupt is migrated then both address and data might change, so
the kernel attempts to mask the MSI interrupt first. But for MSI masking is
optional, so there exist devices which do not provide it. That means that
if the device raises an interrupt internally between the writes then a MSI
message is sent built from half updated state.

On x86 this can lead to spurious interrupts on the wrong interrupt
vector when the affinity setting changes both address and data. As a
consequence the device interrupt can be lost causing the device to
become stuck or malfunctioning.

Evan tried to handle that by disabling MSI accross an MSI message
update. That's not feasible because disabling MSI has issues on its own:

 If MSI is disabled the PCI device is routing an interrupt to the legacy
 INTx mechanism. The INTx delivery can be disabled, but the disablement is
 not working on all devices.

 Some devices lose interrupts when both MSI and INTx delivery are disabled.

Another way to solve this would be to enforce the allocation of the same
vector on all CPUs in the system for this kind of screwed devices. That
could be done, but it would bring back the vector space exhaustion problems
which got solved a few years ago.

Fortunately the high address (if supported by the device) is only relevant
when X2APIC is enabled which implies interrupt remapping. In the interrupt
remapping case the affinity setting is happening at the interrupt remapping
unit and the PCI MSI message is programmed only once when the PCI device is
initialized.

That makes it possible to solve it with a two step update:

  1) Target the MSI msg to the new vector on the current target CPU

  2) Target the MSI msg to the new vector on the new target CPU

In both cases writing the MSI message is only changing a single 32bit word
which prevents the issue of inconsistency.

After writing the final destination it is necessary to check whether the
device issued an interrupt while the intermediate state #1 (new vector,
current CPU) was in effect.

This is possible because the affinity change is always happening on the
current target CPU. The code runs with interrupts disabled, so the
interrupt can be detected by checking the IRR of the local APIC. If the
vector is pending in the IRR then the interrupt is retriggered on the new
target CPU by sending an IPI for the associated vector on the target CPU.

This can cause spurious interrupts on both the local and the new target
CPU.

 1) If the new vector is not in use on the local CPU and the device
    affected by the affinity change raised an interrupt during the
    transitional state (step #1 above) then interrupt entry code will
    ignore that spurious interrupt. The vector is marked so that the
    'No irq handler for vector' warning is supressed once.

 2) If the new vector is in use already on the local CPU then the IRR check
    might see an pending interrupt from the device which is using this
    vector. The IPI to the new target CPU will then invoke the handler of
    the device, which got the affinity change, even if that device did not
    issue an interrupt

 3) If the new vector is in use already on the local CPU and the device
    affected by the affinity change raised an interrupt during the
    transitional state (step #1 above) then the handler of the device which
    uses that vector on the local CPU will be invoked.

expose issues in device driver interrupt handlers which are not prepared to
handle a spurious interrupt correctly. This not a regression, it's just
exposing something which was already broken as spurious interrupts can
happen for a lot of reasons and all driver handlers need to be able to deal
with them.

Reported-by: Evan Green <evgreen@chromium.org>
Debugged-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de
2020-02-01 09:31:47 +01:00
Thomas Gleixner 43ee74487b irqchip updates for Linux 5.6:
- Conversion of the SiFive PLIC to hierarchical domains
 - New SiFive GPIO irqchip driver
 - New Aspeed SCI irqchip driver
 - New NXP INTMUX irqchip driver
 - Additional support for the Meson A1 GPIO irqchip
 - First part of the GICv4.1 support
 - Assorted fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl4rKn0PHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDHVoQALTTYQol+5Gz5pLxnROYEAdFjzrVrCarsK/b
 Cl4uVa5efOTCItSO3L9cEo1zoB++aJxPSOaKqX9hryPwPLTZzDiHYtVQ870tZB+k
 233cTvtT8+iw7/JPKnA8706TYDk1FUkJQ87V0gMLrnVH00dmJ8LvjW1bCdXV8iIa
 Ln78XIF+Ass+qJjSpCDRaOukDm6Qs+sZKAY0+nLXM8Ge564fdX7bPkDGN4tq9DLz
 74ZxY6s3rI5FoPceS270dtDf4Ib8gH+T8Bqd5AYSj/tcRE23s4muGb/O3Kez5Oko
 eEiuSadpep/kPQhgZlpX0tJgtEqHNfi6K8AIMscQQDFmJyuCqgR9/5as+UKX1V0M
 kPlOQtYCAVZmTnlOP6rA2V3RUFurVkFPkwUGzVYlCYxxrARvsH+vPxYqAPH/EEFq
 lGUo+2Z7Z+1ubPsnR8WKs8heC6qJidegGUtKoKYWroJl+tiuT6EtCP3J0QZPhdXT
 lVOBVnR6DHNIURuAEmag/eNYsBIj7PdmlByoMkBFn9LPE7Fn+OExJgbyVsu1IaTe
 AcUHmXR9QpcAKnDLmNSqFvhWsLo8CJ607rH3tL8vqnfijOHyt4AvKeE1R4QSavPx
 0F3FFNdo7Y1FAlJ9Ibw0gLvoIa6uP6FpdI3rht0iRaOZJlnDTbn+B8UayY0Ajvyp
 aGIjx7tY
 =8iz1
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- Conversion of the SiFive PLIC to hierarchical domains
- New SiFive GPIO irqchip driver
- New Aspeed SCI irqchip driver
- New NXP INTMUX irqchip driver
- Additional support for the Meson A1 GPIO irqchip
- First part of the GICv4.1 support
- Assorted fixes
2020-01-24 20:08:51 +01:00
Ming Lei 11ea68f553 genirq, sched/isolation: Isolate from handling managed interrupts
The affinity of managed interrupts is completely handled in the kernel and
cannot be changed via the /proc/irq/* interfaces from user space. As the
kernel tries to spread out interrupts evenly accross CPUs on x86 to prevent
vector exhaustion, it can happen that a managed interrupt whose affinity
mask contains both isolated and housekeeping CPUs is routed to an isolated
CPU. As a consequence IO submitted on a housekeeping CPU causes interrupts
on the isolated CPU.

Add a new sub-parameter 'managed_irq' for 'isolcpus' and the corresponding
logic in the interrupt affinity selection code.

The subparameter indicates to the interrupt affinity selection logic that
it should try to avoid the above scenario.

This isolation is best effort and only effective if the automatically
assigned interrupt mask of a device queue contains isolated and
housekeeping CPUs. If housekeeping CPUs are online then such interrupts are
directed to the housekeeping CPU so that IO submitted on the housekeeping
CPU cannot disturb the isolated CPU.

If a queue's affinity mask contains only isolated CPUs then this parameter
has no effect on the interrupt routing decision, though interrupts are only
happening when tasks running on those isolated CPUs submit IO. IO submitted
on housekeeping CPUs has no influence on those queues.

If the affinity mask contains both housekeeping and isolated CPUs, but none
of the contained housekeeping CPUs is online, then the interrupt is also
routed to an isolated CPU. Interrupts are only delivered when one of the
isolated CPUs in the affinity mask submits IO. If one of the contained
housekeeping CPUs comes online, the CPU hotplug logic migrates the
interrupt automatically back to the upcoming housekeeping CPU. Depending on
the type of interrupt controller, this can require that at least one
interrupt is delivered to the isolated CPU in order to complete the
migration.

[ tglx: Removed unused parameter, added and edited comments/documentation
  	and rephrased the changelog so it contains more details. ]

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200120091625.17912-1-ming.lei@redhat.com
2020-01-22 16:29:49 +01:00
Kevin Hao 0f394daef8 irqdomain: Fix a memory leak in irq_domain_push_irq()
Fix a memory leak reported by kmemleak:
unreferenced object 0xffff000bc6f50e80 (size 128):
  comm "kworker/23:2", pid 201, jiffies 4294894947 (age 942.132s)
  hex dump (first 32 bytes):
    00 00 00 00 41 00 00 00 86 c0 03 00 00 00 00 00  ....A...........
    00 a0 b2 c6 0b 00 ff ff 40 51 fd 10 00 80 ff ff  ........@Q......
  backtrace:
    [<00000000e62d2240>] kmem_cache_alloc_trace+0x1a4/0x320
    [<00000000279143c9>] irq_domain_push_irq+0x7c/0x188
    [<00000000d9f4c154>] thunderx_gpio_probe+0x3ac/0x438
    [<00000000fd09ec22>] pci_device_probe+0xe4/0x198
    [<00000000d43eca75>] really_probe+0xdc/0x320
    [<00000000d3ebab09>] driver_probe_device+0x5c/0xf0
    [<000000005b3ecaa0>] __device_attach_driver+0x88/0xc0
    [<000000004e5915f5>] bus_for_each_drv+0x7c/0xc8
    [<0000000079d4db41>] __device_attach+0xe4/0x140
    [<00000000883bbda9>] device_initial_probe+0x18/0x20
    [<000000003be59ef6>] bus_probe_device+0x98/0xa0
    [<0000000039b03d3f>] deferred_probe_work_func+0x74/0xa8
    [<00000000870934ce>] process_one_work+0x1c8/0x470
    [<00000000e3cce570>] worker_thread+0x1f8/0x428
    [<000000005d64975e>] kthread+0xfc/0x128
    [<00000000f0eaa764>] ret_from_fork+0x10/0x18

Fixes: 495c38d300 ("irqdomain: Add irq_domain_{push,pop}_irq() functions")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200120043547.22271-1-haokexin@gmail.com
2020-01-20 19:10:05 +00:00
Yash Shah b01ecceaf2 genirq: Introduce irq_domain_translate_onecell
Add a new function irq_domain_translate_onecell() that is to be used as
the translate function in struct irq_domain_ops.

Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1575976274-13487-2-git-send-email-yash.shah@sifive.com
2020-01-20 09:19:33 +00:00
Jules Irenge 099368bb10 genirq: Add missing __must_hold() sparse annotation
Add __must_hold() annotation to address the following sparse warning:

  warning: context imbalance in irq_wait_for_poll - unexpected unlock

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191216144208.29852-2-jbi.octave@gmail.com
2020-01-09 18:03:37 +01:00
Jules Irenge 8b3b54799b genirq: Add missing __releases() sparse annotation
Add __releases() annotation to address the following sparse warning:

  warning: context imbalance in __irq_put_desc_unlock() - unexpected unlock

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191216144208.29852-1-jbi.octave@gmail.com
2020-01-09 18:03:24 +01:00
Luca Ceresoli 025af39b87 genirq: Show irq name in non-oneshot error message
Requesting a threaded IRQ with handler=NULL and !ONESHOT fails, but the
error message does not include the IRQ line name, which makes it harder to
find the offending driver.

Print the IRQ line name to clarify where the error comes from. Use the same
format as the other pr_err() above in the same function.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191105140854.27893-1-luca@lucaceresoli.net
2020-01-09 15:42:54 +01:00
Thomas Gleixner 407e62f52a irqchip updates for Linux 5.5
- Qualcomm PDC wakeup interrupt support
 - Layerscape external IRQ support
 - Broadcom bcm7038 PM and wakeup support
 - Ingenic driver cleanup and modernization
 - GICv3 ITS preparation for GICv4.1 updates
 - GICv4 fixes
 - Various cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl3VJasPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDMLEP/2U55GLmPuNqW/na4YFmcOYAkoP0WpEKDzn9
 u8lBi8CukKl1Z2JLAyP0E1e5iOVS0exvQ5V4OwxGKmeR9oWmB3Lym8UWRw7vcKEF
 HMKgtPCd3U3J5jW0P4Hr8hn6Q+B55fdMrrAaJcgsfBVB7bRB0lC0LZYGtN4VC4d8
 rTQzup5CK8Mu9k4NztLCxxoBUKFoqM+ZKsrRB2eOXB9amcPQtFvwC+5ZL2tDr3wS
 7d+pd6G4A+hsloIDUxoH9BrO/jd1jlfHyBRDFJIgpo/IQWVT6ciQECZomRR1pW30
 bGFYBf/HPFqfyH+ZOrWprSAd0Yx33WtYaMokYaJ6vGu4wedyxh/1LTRLzL0tWuyZ
 tPFvEmiiP/Hoeq1JHFRFQUO/75ckqALLeAxCjACCN8+F2Z0armk1W/iwehZNQHHV
 JdDXegRNUlMipG2kk5D3L6AK28bi+3+axc1ERMN1RO40eLm8NLogWL2TJlxLbyUe
 lMZMe43ceC0McGnQpAY8qyuC7IycQtngKNBvzG+6ADucGpFez3gYxh39RR43XMVo
 37Hsj+Ur7CFBJj6WTCzV2teC/WaXXQkJYxn6fsHNmUgdwPgGD3LppxhlWG49Ao9w
 x8ZnfyrrYmcFOJrKbT45ExMihioaGf8dyksKZNA/Z4dI0g/kf0LyYi5ujZaDDilI
 eDkMI/xI
 =uENR
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

 - Qualcomm PDC wakeup interrupt support
 - Layerscape external IRQ support
 - Broadcom bcm7038 PM and wakeup support
 - Ingenic driver cleanup and modernization
 - GICv3 ITS preparation for GICv4.1 updates
 - GICv4 fixes
 - Various cleanups
2019-11-20 14:16:34 +01:00
Maulik Shah 4a169a95d8 genirq: Introduce irq_chip_get/set_parent_state calls
On certain QTI chipsets some GPIOs are direct-connect interrupts to the
GIC to be used as regular interrupt lines. When the GPIOs are not used
for interrupt generation the interrupt line is disabled. But disabling
the interrupt at GIC does not prevent the interrupt to be reported as
pending at GIC_ISPEND. Later, when drivers call enable_irq() on the
interrupt, an unwanted interrupt occurs.

Introduce get and set methods for irqchip's parent to clear it's pending
irq state. This then can be invoked by the GPIO interrupt controller on
the parents in it hierarchy to clear the interrupt before enabling the
interrupt.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-7-git-send-email-ilina@codeaurora.org

[updated commit text and minor code fixes]
2019-11-16 10:20:02 +00:00
luanshi 20a15ee040 genirq: Fix function documentation of __irq_alloc_descs()
The function got renamed at some point, but the kernel-doc was not updated.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1573656093-8643-1-git-send-email-zhangliguang@linux.alibaba.com
2019-11-15 10:48:38 +01:00
Yi Wang 0ed9ca2589 irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
A recent commit changed a parameter of __irq_domain_alloc_fwnode(), but
did not update the documentation comment. Fix it up.

Fixes: b977fcf477 ("irqdomain/debugfs: Use PAs to generate fwnode names")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1571476047-29463-1-git-send-email-wang.yi59@zte.com.cn
2019-11-05 00:48:26 +01:00
Linus Torvalds 77dcfe2b9e Power management updates for 5.4-rc1
- Rework the main suspend-to-idle control flow to avoid repeating
    "noirq" device resume and suspend operations in case of spurious
    wakeups from the ACPI EC and decouple the ACPI EC wakeups support
    from the LPS0 _DSM support (Rafael Wysocki).
 
  - Extend the wakeup sources framework to expose wakeup sources as
    device objects in sysfs (Tri Vo, Stephen Boyd).
 
  - Expose system suspend statistics in sysfs (Kalesh Singh).
 
  - Introduce a new haltpoll cpuidle driver and a new matching
    governor for virtualized guests wanting to do guest-side polling
    in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li,
    Stephen Rothwell).
 
  - Fix the menu and teo cpuidle governors to allow the scheduler tick
    to be stopped if PM QoS is used to limit the CPU idle state exit
    latency in some cases (Rafael Wysocki).
 
  - Increase the resolution of the play_idle() argument to microseconds
    for more fine-grained injection of CPU idle cycles (Daniel Lezcano).
 
  - Switch over some users of cpuidle notifiers to the new QoS-based
    frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
    policy notifier events (Viresh Kumar).
 
  - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
 
  - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
    (Andrew-sh.Cheng, Fabien Parent).
 
  - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
    Huang).
 
  - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
 
  - Update the qcom cpufreq driver (among other things, to make it
    easier to extend and to use kryo cpufreq for other nvmem-based
    SoCs) and add qcs404 support to it  (Niklas Cassel, Douglas
    RAILLARD, Sibi Sankar, Sricharan R).
 
  - Fix assorted issues and make assorted minor improvements in the
    cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
    Gustavo Silva, Hariprasad Kelam).
 
  - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
    Bergmann).
 
  - Add new Exynos PPMU events to devfreq events and extend that
    mechanism (Lukasz Luba).
 
  - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
 
  - Improve devfreq documentation and governor code, fix spelling
    typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard
    Crestez, MyungJoo Ham, Gaël PORTAY).
 
  - Add regulators enable and disable to the OPP (operating performance
    points) framework (Kamil Konieczny).
 
  - Update the OPP framework to support multiple opp-suspend properties
    (Anson Huang).
 
  - Fix assorted issues and make assorted minor improvements in the OPP
    code (Niklas Cassel, Viresh Kumar, Yue Hu).
 
  - Clean up the generic power domains (genpd) framework (Ulf Hansson).
 
  - Clean up assorted pieces of power management code and documentation
    (Akinobu Mita, Amit Kucheria, Chuhong Yuan).
 
  - Update the pm-graph tool to version 5.5 including multiple fixes
    and improvements (Todd Brandt).
 
  - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
    Sébastien Szymanski).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl2ArZ4SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxgfYQAK80hs43vWQDmp7XKrN4pQe8+qYULAGO
 fBfrFl+NG9y/cnuqnt3NtA8MoyNsMMkMLkpkEDMfSbYqqH5ehEzX5+uGJWiWx8+Y
 oH5KU8MH7Tj/utYaalGzDt0AHfHZDIGC0NCUNQJVtE/4mOANFabwsCwscp4MrD5Q
 WjFN8U4BrsmWgJdZ/U9QIWcDZ0I+1etCF+rZG2yxSv31FMq2Zk/Qm4YyobqCvQFl
 TR9rxl08wqUmIYIz5cDjt/3AKH7NLLDqOTstbCL7cmufM5XPFc1yox69xc89UrIa
 4AMgmDp7SMwFG/gdUPof0WQNmx7qxmiRAPleAOYBOZW/8jPNZk2y+RhM5NeF72m7
 AFqYiuxqatkSb4IsT8fLzH9IUZOdYr8uSmoMQECw+MHdApaKFjFV8Lb/qx5+AwkD
 y7pwys8dZSamAjAf62eUzJDWcEwkNrujIisGrIXrVHb7ISbweskMOmdAYn9p4KgP
 dfRzpJBJ45IaMIdbaVXNpg3rP7Apfs7X1X+/ZhG6f+zHH3zYwr8Y81WPqX8WaZJ4
 qoVCyxiVWzMYjY2/1lzjaAdqWojPWHQ3or3eBaK52DouyG3jY6hCDTLwU7iuqcCX
 jzAtrnqrNIKufvaObEmqcmYlIIOFT7QaJCtGUSRFQLfSon8fsVSR7LLeXoAMUJKT
 JWQenuNaJngK
 =TBDQ
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These include a rework of the main suspend-to-idle code flow (related
  to the handling of spurious wakeups), a switch over of several users
  of cpufreq notifiers to QoS-based limits, a new devfreq driver for
  Tegra20, a new cpuidle driver and governor for virtualized guests, an
  extension of the wakeup sources framework to expose wakeup sources as
  device objects in sysfs, and more.

  Specifics:

   - Rework the main suspend-to-idle control flow to avoid repeating
     "noirq" device resume and suspend operations in case of spurious
     wakeups from the ACPI EC and decouple the ACPI EC wakeups support
     from the LPS0 _DSM support (Rafael Wysocki).

   - Extend the wakeup sources framework to expose wakeup sources as
     device objects in sysfs (Tri Vo, Stephen Boyd).

   - Expose system suspend statistics in sysfs (Kalesh Singh).

   - Introduce a new haltpoll cpuidle driver and a new matching governor
     for virtualized guests wanting to do guest-side polling in the idle
     loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).

   - Fix the menu and teo cpuidle governors to allow the scheduler tick
     to be stopped if PM QoS is used to limit the CPU idle state exit
     latency in some cases (Rafael Wysocki).

   - Increase the resolution of the play_idle() argument to microseconds
     for more fine-grained injection of CPU idle cycles (Daniel
     Lezcano).

   - Switch over some users of cpuidle notifiers to the new QoS-based
     frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
     policy notifier events (Viresh Kumar).

   - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).

   - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
     (Andrew-sh.Cheng, Fabien Parent).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang).

   - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).

   - Update the qcom cpufreq driver (among other things, to make it
     easier to extend and to use kryo cpufreq for other nvmem-based
     SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
     RAILLARD, Sibi Sankar, Sricharan R).

   - Fix assorted issues and make assorted minor improvements in the
     cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
     Gustavo Silva, Hariprasad Kelam).

   - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
     Bergmann).

   - Add new Exynos PPMU events to devfreq events and extend that
     mechanism (Lukasz Luba).

   - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).

   - Improve devfreq documentation and governor code, fix spelling typos
     in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
     MyungJoo Ham, Gaël PORTAY).

   - Add regulators enable and disable to the OPP (operating performance
     points) framework (Kamil Konieczny).

   - Update the OPP framework to support multiple opp-suspend properties
     (Anson Huang).

   - Fix assorted issues and make assorted minor improvements in the OPP
     code (Niklas Cassel, Viresh Kumar, Yue Hu).

   - Clean up the generic power domains (genpd) framework (Ulf Hansson).

   - Clean up assorted pieces of power management code and documentation
     (Akinobu Mita, Amit Kucheria, Chuhong Yuan).

   - Update the pm-graph tool to version 5.5 including multiple fixes
     and improvements (Todd Brandt).

   - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
     Sébastien Szymanski)"

* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
  cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
  cpuidle-haltpoll: do not set an owner to allow modunload
  cpuidle-haltpoll: return -ENODEV on modinit failure
  cpuidle-haltpoll: set haltpoll as preferred governor
  cpuidle: allow governor switch on cpuidle_register_driver()
  PM: runtime: Documentation: add runtime_status ABI document
  pm-graph: make setVal unbuffered again for python2 and python3
  powercap: idle_inject: Use higher resolution for idle injection
  cpuidle: play_idle: Increase the resolution to usec
  cpuidle-haltpoll: vcpu hotplug support
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  ...
2019-09-17 19:15:14 -07:00
Linus Torvalds a572ba6329 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner:
 "Updates from the irq departement:

   - Update the interrupt spreading code so it handles numa node with
     different CPU counts properly.

   - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
     ranges.

   - Conversion of all alloc_fwnode() users to use physical addresses
     instead of virtual addresses so the virtual addresses are not
     leaked. The physical address is sufficient to identify the
     associated interrupt chip.

   - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.

   - Enforce interrupt threading at compile time if RT is enabled.

   - Small updates and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
  irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
  irqdomain: Add the missing assignment of domain->fwnode for named fwnode
  irqchip/mmp: Coexist with GIC root IRQ controller
  irqchip/mmp: Mask off interrupts from other cores
  irqchip/mmp: Add missing chained_irq_{enter,exit}()
  irqchip/mmp: Do not use of_address_to_resource() to get mux regs
  irqchip/meson-gpio: Add support for meson sm1 SoCs
  dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
  genirq/affinity: Remove const qualifier from node_to_cpumask argument
  genirq/affinity: Spread vectors on node according to nr_cpu ratio
  genirq/affinity: Improve __irq_build_affinity_masks()
  irqchip: Remove dev_err() usage after platform_get_irq()
  irqchip: Add include guard to irq-partition-percpu.h
  irqchip/mmp: Do not call irq_set_default_host() on DT platforms
  irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
  irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
  irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
  irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
  irqchip/gic-v3: Add EPPI range support
  ...
2019-09-17 11:42:15 -07:00
Rafael J. Wysocki d281706369 Merge branch 'pm-sleep'
* pm-sleep: (29 commits)
  ACPI: PM: s2idle: Always set up EC GPE for system wakeup
  ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily
  PM / wakeup: Unexport wakeup_source_sysfs_{add,remove}()
  PM / wakeup: Register wakeup class kobj after device is added
  PM / wakeup: Fix sysfs registration error path
  PM / wakeup: Show wakeup sources stats in sysfs
  PM / wakeup: Use wakeup_source_register() in wakelock.c
  PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare()
  PM: sleep: Replace strncmp() with str_has_prefix()
  PM: suspend: Fix platform_suspend_prepare_noirq()
  intel-hid: Disable button array during suspend-to-idle
  intel-hid: intel-vbtn: Avoid leaking wakeup_mode set
  ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices
  ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message
  ACPI: EC: PM: Consolidate some code depending on PM_SLEEP
  ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events()
  ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend
  ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter
  ACPI: PM: s2idle: Rearrange lps0_device_attach()
  PM/sleep: Expose suspend stats in sysfs
  ...
2019-09-17 09:36:34 +02:00
Linus Torvalds 7e67a85999 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:

 - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
   Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
   Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.

   As perf and the scheduler is getting bigger and more complex,
   document the status quo of current responsibilities and interests,
   and spread the review pain^H^H^H^H fun via an increase in the Cc:
   linecount generated by scripts/get_maintainer.pl. :-)

 - Add another series of patches that brings the -rt (PREEMPT_RT) tree
   closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
   into a new CONFIG_PREEMPTION category that will allow the eventual
   introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
   to go though.

 - Extend the CPU cgroup controller with uclamp.min and uclamp.max to
   allow the finer shaping of CPU bandwidth usage.

 - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).

 - Improve the behavior of high CPU count, high thread count
   applications running under cpu.cfs_quota_us constraints.

 - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.

 - Improve CPU isolation housekeeping CPU allocation NUMA locality.

 - Fix deadline scheduler bandwidth calculations and logic when cpusets
   rebuilds the topology, or when it gets deadline-throttled while it's
   being offlined.

 - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
   setscheduler() system calls without creating global serialization.
   Add new synchronization between cpuset topology-changing events and
   the deadline acceptance tests in setscheduler(), which were broken
   before.

 - Rework the active_mm state machine to be less confusing and more
   optimal.

 - Rework (simplify) the pick_next_task() slowpath.

 - Improve load-balancing on AMD EPYC systems.

 - ... and misc cleanups, smaller fixes and improvements - please see
   the Git log for more details.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  sched/psi: Correct overly pessimistic size calculation
  sched/fair: Speed-up energy-aware wake-ups
  sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
  sched/uclamp: Update CPU's refcount on TG's clamp changes
  sched/uclamp: Use TG's clamps to restrict TASK's clamps
  sched/uclamp: Propagate system defaults to the root group
  sched/uclamp: Propagate parent clamps
  sched/uclamp: Extend CPU's cgroup controller
  sched/topology: Improve load balancing on AMD EPYC systems
  arch, ia64: Make NUMA select SMP
  sched, perf: MAINTAINERS update, add submaintainers and reviewers
  sched/fair: Use rq_lock/unlock in online_fair_sched_group
  cpufreq: schedutil: fix equation in comment
  sched: Rework pick_next_task() slow-path
  sched: Allow put_prev_task() to drop rq->lock
  sched/fair: Expose newidle_balance()
  sched: Add task_struct pointer to sched_class::set_curr_task
  sched: Rework CPU hotplug task selection
  sched/{rt,deadline}: Fix set_next_task vs pick_next_task
  sched: Fix kerneldoc comment for ia64_set_curr_task
  ...
2019-09-16 17:25:49 -07:00
Linus Torvalds 76f0f227cf ia64 for v5.4 - big change here is removal of support for SGI Altix
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdf64MAAoJEKurIx+X31iBB20P/07o93sBT92SiA2/ety9sLqV
 BGJmEdw7gyb9WVbUip6s71FIEKZw4foCGkqDiX+lr5Fw2A9tiK7LmFgTLi4LLwg+
 syhYZ1y5/mwBI4FLlJudKjQdFZjr/n7DNlz4H67woE2kK+FyRsOKEaFUhuR8+0rC
 mKJBKtIGnoIOPG06PT1k5qfdpzlreCFoWdIhjO55LfDgZnnDiMaX5h0vcBQ9xgCp
 xGV0n/f7+qn4pzB4hGvNV209Sdgv2V4t77bHNvyXlJrM5Hqzafo5MzFgEJv+fRqJ
 2RnkWVhwctfbid/2ggf2aAsYnMK3GigEaOCsYW2oWJESVUQhxIi3ndF/Jt9fraZv
 ZouD7G/s64P5lUQuCT9JnKGzJrSgxvkd37049AZ4pFVc2MzLC6o6dyyP8pu5ARe8
 T0shFik3+gsml2US/vSUzxvrg1saRQjl9E/AJ0RTZ8oyP4FNnFmkJf38qj3a0L0k
 ILFYscM5q7WPggoDA/m6F96tLGhdK/sKjDzrADjEh2dIvn4woqoEJSDn+rXuP+Gm
 UOj1v8mILZCqvOAmc9IkGCkPUlbrmNV/1FYh5+GWudtillEaD82vjSqm+jnVbfXD
 REvHlR/kxCSj1gg/+nk+NFdZCkW3xETOcTZohhDkR7du2mHjTwBMZ2YRPrqoX4c8
 VZA57Mrqm5Uk5601qYRl
 =L5e+
 -----END PGP SIGNATURE-----

Merge tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux

Pull ia64 updates from Tony Luck:
 "The big change here is removal of support for SGI Altix"

* tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits)
  genirq: remove the is_affinity_mask_valid hook
  ia64: remove CONFIG_SWIOTLB ifdefs
  ia64: remove support for machvecs
  ia64: move the screen_info setup to common code
  ia64: move the ROOT_DEV setup to common code
  ia64: rework iommu probing
  ia64: remove the unused sn_coherency_id symbol
  ia64: remove the SGI UV simulator support
  ia64: remove the zx1 swiotlb machvec
  ia64: remove CONFIG_ACPI ifdefs
  ia64: remove CONFIG_PCI ifdefs
  ia64: remove the hpsim platform
  ia64: remove now unused machvec indirections
  ia64: remove support for the SGI SN2 platform
  drivers: remove the SGI SN2 IOC4 base support
  drivers: remove the SGI SN2 IOC3 base support
  qla2xxx: remove SGI SN2 support
  qla1280: remove SGI SN2 support
  misc/sgi-xp: remove SGI SN2 support
  char/mspec: remove SGI SN2 support
  ...
2019-09-16 15:32:01 -07:00
Thomas Gleixner 9cc5b7fba5 irqchip updates for Linux 5.4
- Large GICv3 updates to support new PPI and SPI ranges
 - Conver all alloc_fwnode() users to use PAs instead of VAs
 - Add support for Marvell's MMP3 irqchip
 - Add support for Amlogic Meson SM1
 - Various cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl1yLdwPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDVHgP+wTAtNzxF4nRsJO3ZlbKe7n2ut7toZvqip7U
 97Ll652m/24stioU7b4/Z92E1fWIQe6Bv7u5detNQ4bIg2uwD6ZDYMjLLOXsJXrQ
 XH7pEAVe2eO0rjZudodUteyPGZQAS1/okY/4qsYNDiWKHi5xQPwMBNJ6fVwOVXUk
 HG7ClMny1i7SSRm3CGmW3Hxb279DrHOxCGPO6aEX5UQ/uZErCTJN5oFdLfAKvfaU
 qRpzetq4QOO+L7UBer6+jmtAvA/kuYwpGSnhJXhFOLMSgrGLQbINvYeAyv2vKGvF
 l6HQNuEf+OQjR5RcUZi6qbAO/WEh2xzmxpqta8COwjBFDcwsITyc5wNRNEfmNqO9
 Yrh3/a/J0eWX6X4rmmJkMDEBQvNbyA1//9d5NIjPhIVERZYPa4Z2lb220P4+58r7
 xnCqZnxZO78BhUd7HXeCluuTJs83iHxs03nAHysU9YZWkiF7jDXE0d3kla8cGcdY
 aOaSID0Q52flRxLymWJs29kyXZU8rpiPTbxvi86Ggkvgrj2pSwb8PF8LL4WPkzgh
 BcuF2ca9oa22OlA3oLV/sKwFRS77en+bpzLeU0NjeAcu5b8AY2nSSYXiuvtxIzi3
 FbQCsBBl7i5F5AQT9XGugjeNsCRUsUvIOP4f4w2Ej6HmqJb/SJVMBedMBsjGoEFG
 sj93Nc7f
 =PsGr
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates for Linux 5.4 from Marc Zyngier:

 - Large GICv3 updates to support new PPI and SPI ranges
 - Conver all alloc_fwnode() users to use PAs instead of VAs
 - Add support for Marvell's MMP3 irqchip
 - Add support for Amlogic Meson SM1
 - Various cleanups and fixes
2019-09-06 13:03:39 +02:00
Yunfeng Ye eddf3e9c7c genirq: Prevent NULL pointer dereference in resend_irqs()
The following crash was observed:

  Unable to handle kernel NULL pointer dereference at 0000000000000158
  Internal error: Oops: 96000004 [#1] SMP
  pc : resend_irqs+0x68/0xb0
  lr : resend_irqs+0x64/0xb0
  ...
  Call trace:
   resend_irqs+0x68/0xb0
   tasklet_action_common.isra.6+0x84/0x138
   tasklet_action+0x2c/0x38
   __do_softirq+0x120/0x324
   run_ksoftirqd+0x44/0x60
   smpboot_thread_fn+0x1ac/0x1e8
   kthread+0x134/0x138
   ret_from_fork+0x10/0x18

The reason for this is that the interrupt resend mechanism happens in soft
interrupt context, which is a asynchronous mechanism versus other
operations on interrupts. free_irq() does not take resend handling into
account. Thus, the irq descriptor might be already freed before the resend
tasklet is executed. resend_irqs() does not check the return value of the
interrupt descriptor lookup and derefences the return value
unconditionally.

  1):
  __setup_irq
    irq_startup
      check_irq_resend  // activate softirq to handle resend irq
  2):
  irq_domain_free_irqs
    irq_free_descs
      free_desc
        call_rcu(&desc->rcu, delayed_free_desc)
  3):
  __do_softirq
    tasklet_action
      resend_irqs
        desc = irq_to_desc(irq)
        desc->handle_irq(desc)  // desc is NULL --> Ooops

Fix this by adding a NULL pointer check in resend_irqs() before derefencing
the irq descriptor.

Fixes: a4633adcdb ("[PATCH] genirq: add genirq sw IRQ-retrigger")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1630ae13-5c8e-901e-de09-e740b6a426a7@huawei.com
2019-09-05 21:31:14 +02:00
Dexuan Cui 711419e504 irqdomain: Add the missing assignment of domain->fwnode for named fwnode
Recently device pass-through stops working for Linux VM running on Hyper-V.

git-bisect shows the regression is caused by the recent commit
467a3bb974 ("PCI: hv: Allocate a named fwnode ..."), but the root cause
is that the commit d59f6617ee forgets to set the domain->fwnode for
IRQCHIP_FWNODE_NAMED*, and as a result:

1. The domain->fwnode remains to be NULL.

2. irq_find_matching_fwspec() returns NULL since "h->fwnode == fwnode" is
false, and pci_set_bus_msi_domain() sets the Hyper-V PCI root bus's
msi_domain to NULL.

3. When the device is added onto the root bus, the device's dev->msi_domain
is set to NULL in pci_set_msi_domain().

4. When a device driver tries to enable MSI-X, pci_msi_setup_msi_irqs()
calls arch_setup_msi_irqs(), which uses the native MSI chip (i.e.
arch/x86/kernel/apic/msi.c: pci_msi_controller) to set up the irqs, but
actually pci_msi_setup_msi_irqs() is supposed to call
msi_domain_alloc_irqs() with the hbus->irq_domain, which is created in
hv_pcie_init_irq_domain() and is associated with the Hyper-V chip
hv_msi_irq_chip. Consequently, the irq line is not properly set up, and
the device driver can not receive any interrupt.

Fixes: d59f6617ee ("genirq: Allow fwnode to carry name information only")
Fixes: 467a3bb974 ("PCI: hv: Allocate a named fwnode instead of an address-based one")
Reported-by: Lili Deng <v-lide@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/PU1P153MB01694D9AF625AC335C600C5FBFBE0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
2019-09-03 09:16:50 +01:00
Ming Lei 101f85b56d genirq/affinity: Remove const qualifier from node_to_cpumask argument
When CONFIG_CPUMASK_OFFSTACK isn't enabled, 'cpumask_var_t' is as

'typedef struct cpumask cpumask_var_t[1]',

so the argument 'node_to_cpumask' alloc_nodes_vectors() can't be declared
as 'const cpumask_var_t *'

Fixes the following warning:

   kernel/irq/affinity.c: In function '__irq_build_affinity_masks':
     alloc_nodes_vectors(numvecs, node_to_cpumask, cpu_mask,
                                  ^
   kernel/irq/affinity.c:128:13: note: expected 'const struct cpumask (*)[1]' but argument is of type 'struct cpumask (*)[1]'
    static void alloc_nodes_vectors(unsigned int numvecs,
                ^
Fixes: b1a5a73e64 ("genirq/affinity: Spread vectors on node according to nr_cpu ratio")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190828085815.19931-1-ming.lei@redhat.com
2019-08-28 12:20:43 +02:00
Ming Lei b1a5a73e64 genirq/affinity: Spread vectors on node according to nr_cpu ratio
Now __irq_build_affinity_masks() spreads vectors evenly per node, but there
is a case that not all vectors have been spread when each numa node has a
different number of CPUs which triggers the warning in the spreading code.

Improve the spreading algorithm by

 - assigning vectors according to the ratio of the number of CPUs on a node
   to the number of remaining CPUs.

 - running the assignment from smaller nodes to bigger nodes to guarantee
   that every active node gets allocated at least one vector.

This ensures that all vectors are spread out. Asided of that the spread
becomes more fair if the nodes have different number of CPUs.

For example, on the following machine:
	CPU(s):              16
	On-line CPU(s) list: 0-15
	Thread(s) per core:  1
	Core(s) per socket:  8
	Socket(s):           2
	NUMA node(s):        2
	...
	NUMA node0 CPU(s):   0,1,3,5-9,11,13-15
	NUMA node1 CPU(s):   2,4,10,12

When a driver requests to allocate 8 vectors, the following spread results:

	irq 31, cpu list 2,4
	irq 32, cpu list 10,12
	irq 33, cpu list 0-1
	irq 34, cpu list 3,5
	irq 35, cpu list 6-7
	irq 36, cpu list 8-9
	irq 37, cpu list 11,13
	irq 38, cpu list 14-15

So Node 0 has now 6 and Node 1 has 2 vectors assigned. The original
algorithm assigned 4 vectors on each node which was unfair versus Node 0.

[ tglx: Massaged changelog ]

Reported-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Link: https://lkml.kernel.org/r/20190816022849.14075-3-ming.lei@redhat.com
2019-08-27 16:31:17 +02:00
Ming Lei 53c1788b7d genirq/affinity: Improve __irq_build_affinity_masks()
One invariant of __irq_build_affinity_masks() is that all CPUs in the
specified masks (cpu_mask AND node_to_cpumask for each node) should be
covered during the spread. Even though all requested vectors have been
reached, it's still required to spread vectors among remained CPUs. A
similar policy has been taken in case of 'numvecs <= nodes' already.

So remove the following check inside the loop:

	if (done >= numvecs)
		break;

Meantime assign at least 1 vector for remaining nodes if 'numvecs' vectors
have been handled already.

Also, if the specified cpumask for one numa node is empty, simply do not
spread vectors on this node.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190816022849.14075-2-ming.lei@redhat.com
2019-08-27 16:31:17 +02:00
Michael Kelley d0ff14fdc9 genirq: Properly pair kobject_del() with kobject_add()
If alloc_descs() fails before irq_sysfs_init() has run, free_desc() in the
cleanup path will call kobject_del() even though the kobject has not been
added with kobject_add().

Fix this by making the call to kobject_del() conditional on whether
irq_sysfs_init() has run.

This problem surfaced because commit aa30f47cf6 ("kobject: Add support
for default attribute groups to kobj_type") makes kobject_del() stricter
about pairing with kobject_add(). If the pairing is incorrrect, a WARNING
and backtrace occur in sysfs_remove_group() because there is no parent.

[ tglx: Add a comment to the code and make it work with CONFIG_SYSFS=n ]

Fixes: ecb3f394c5 ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1564703564-4116-1-git-send-email-mikelley@microsoft.com
2019-08-19 21:41:19 +02:00
Thomas Gleixner b6a32bbd87 genirq: Force interrupt threading on RT
Switch force_irqthreads from a boot time modifiable variable to a compile
time constant when CONFIG_PREEMPT_RT is enabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190816160923.12855-1-bigeasy@linutronix.de
2019-08-19 15:45:48 +02:00
Christoph Hellwig 0d3d343560 genirq: remove the is_affinity_mask_valid hook
This override was only used by the ia64 SGI SN2 platform, which is
gone now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-29-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16 14:32:26 -07:00
Ming Lei 491beed3b1 genirq/affinity: Create affinity mask for single vector
Since commit c66d4bd110 ("genirq/affinity: Add new callback for
(re)calculating interrupt sets"), irq_create_affinity_masks() returns
NULL in case of single vector. This change has caused regression on some
drivers, such as lpfc.

The problem is that single vector requests can happen in some generic cases:

  1) kdump kernel

  2) irq vectors resource is close to exhaustion.

If in that situation the affinity mask for a single vector is not created,
every caller has to handle the special case.

There is no reason why the mask cannot be created, so remove the check for
a single vector and create the mask.

Fixes: c66d4bd110 ("genirq/affinity: Add new callback for (re)calculating interrupt sets")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190805011906.5020-1-ming.lei@redhat.com
2019-08-08 08:47:55 +02:00
Marc Zyngier b977fcf477 irqdomain/debugfs: Use PAs to generate fwnode names
Booting a large arm64 server (HiSi D05) leads to the following
shouting at boot time:

[   20.722132] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[   20.730851] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[   20.739560] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[   20.748267] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[   20.756975] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[   20.765683] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[   20.774391] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!

and many more... Evidently, we expect something a bit more informative
than ____ptrval____, and certainly we want all of our domains, not just
the first one.

For that, turn the %p used to generate the fwnode name into something
that won't be repainted (%pa). Given that we've now fixed all users to
pass a pointer to a PA, it will actually do the right thing.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-07 14:24:54 +01:00
Matthew Wilcox (Oracle) 7b3c92b85a sched/core: Convert get_task_struct() to return the task
Returning the pointer that was passed in allows us to write
slightly more idiomatic code.  Convert a few users.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190704221323.24290-1-willy@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:54 +02:00
Rafael J. Wysocki 3a79bc63d9 PCI: irq: Introduce rearm_wake_irq()
Introduce a new function, rearm_wake_irq(), allowing a wakeup IRQ
to be armed for systen wakeup detection again without running any
action handlers associated with it after it has been armed for
wakeup detection and triggered.

That is useful for IRQs, like ACPI SCI, that may deliver wakeup
as well as non-wakeup interrupts when armed for systen wakeup
detection.  In those cases, it may be possible to determine whether
or not the delivered interrupt is a systen wakeup one without
running the entire action handler (or handlers, if the IRQ is
shared) for the IRQ, and if the interrupt turns out to be a
non-wakeup one, the IRQ can be rearmed with the help of the
new function.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2019-07-23 09:37:51 +02:00
Linus Torvalds 0902d5011c Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x96 apic updates from Thomas Gleixner:
 "Updates for the x86 APIC interrupt handling and APIC timer:

   - Fix a long standing issue with spurious interrupts which was caused
     by the big vector management rework a few years ago. Robert Hodaszi
     provided finally enough debug data and an excellent initial failure
     analysis which allowed to understand the underlying issues.

     This contains a change to the core interrupt management code which
     is required to handle this correctly for the APIC/IO_APIC. The core
     changes are NOOPs for most architectures except ARM64. ARM64 is not
     impacted by the change as confirmed by Marc Zyngier.

   - Newer systems allow to disable the PIT clock for power saving
     causing panic in the timer interrupt delivery check of the IO/APIC
     when the HPET timer is not enabled either. While the clock could be
     turned on this would cause an endless whack a mole game to chase
     the proper register in each affected chipset.

     These systems provide the relevant frequencies for TSC, CPU and the
     local APIC timer via CPUID and/or MSRs, which allows to avoid the
     PIT/HPET based calibration. As the calibration code is the only
     usage of the legacy timers on modern systems and is skipped anyway
     when the frequencies are known already, there is no point in
     setting up the PIT and actually checking for the interrupt delivery
     via IO/APIC.

     To achieve this on a wide variety of platforms, the CPUID/MSR based
     frequency readout has been made more robust, which also allowed to
     remove quite some workarounds which turned out to be not longer
     required. Thanks to Daniel Drake for analysis, patches and
     verification"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Seperate unused system vectors from spurious entry again
  x86/irq: Handle spurious interrupt after shutdown gracefully
  x86/ioapic: Implement irq_get_irqchip_state() callback
  genirq: Add optional hardware synchronization for shutdown
  genirq: Fix misleading synchronize_irq() documentation
  genirq: Delay deactivation in free_irq()
  x86/timer: Skip PIT initialization on modern chipsets
  x86/apic: Use non-atomic operations when possible
  x86/apic: Make apic_bsp_setup() static
  x86/tsc: Set LAPIC timer period to crystal clock frequency
  x86/apic: Rename 'lapic_timer_frequency' to 'lapic_timer_period'
  x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency
2019-07-08 11:22:57 -07:00
Linus Torvalds 2a1ccd3142 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement provides the usual mixed bag:

  Core:

   - Further improvements to the irq timings code which aims to predict
     the next interrupt for power state selection to achieve better
     latency/power balance

   - Add interrupt statistics to the core NMI handlers

   - The usual small fixes and cleanups

  Drivers:

   - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and
     Amazon Gravition AMR/GIC interrupt controllers.

   - Rework of the Renesas INTC controller driver

   - ACPI support for Socionext SoCs

   - Enhancements to the CSKY interrupt controller

   - The usual small fixes and cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  irq/irqdomain: Fix comment typo
  genirq: Update irq stats from NMI handlers
  irqchip/gic-pm: Remove PM_CLK dependency
  irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
  dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC
  softirq: Use __this_cpu_write() in takeover_tasklets()
  irqchip/mbigen: Stop printing kernel addresses
  irqchip/gic: Add dependency for ARM_GIC_MAX_NR
  genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
  genirq/timings: Add selftest for next event computation
  genirq/timings: Add selftest for irqs circular buffer
  genirq/timings: Add selftest for circular array
  genirq/timings: Encapsulate storing function
  genirq/timings: Encapsulate timings push
  genirq/timings: Optimize the period detection speed
  genirq/timings: Fix timings buffer inspection
  genirq/timings: Fix next event index function
  irqchip/qcom: Use struct_size() in devm_kzalloc()
  irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler
  dt-bindings: interrupt-controller: Update csky mpintc
  ...
2019-07-08 11:01:13 -07:00
Zenghui Yu 3a1d24ca95 irq/irqdomain: Fix comment typo
Fix typo in the comment on top of __irq_domain_add().

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562388072-23492-1-git-send-email-yuzenghui@huawei.com
2019-07-06 10:40:20 +02:00
Shijith Thotton c09cb12935 genirq: Update irq stats from NMI handlers
The NMI handlers handle_percpu_devid_fasteoi_nmi() and handle_fasteoi_nmi()
do not update the interrupt counts. Due to that the NMI interrupt count
does not show up correctly in /proc/interrupts.

Add the statistics and treat the NMI handlers in the same way as per cpu
interrupts and prevent them from updating irq_desc::tot_count as this might
be corrupted due to concurrency.

[ tglx: Massaged changelog ]

Fixes: 2dcf1fbcad ("genirq: Provide NMI handlers")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562313336-11888-1-git-send-email-sthotton@marvell.com
2019-07-06 10:40:19 +02:00
Thomas Gleixner 62e0468650 genirq: Add optional hardware synchronization for shutdown
free_irq() ensures that no hardware interrupt handler is executing on a
different CPU before actually releasing resources and deactivating the
interrupt completely in a domain hierarchy.

But that does not catch the case where the interrupt is on flight at the
hardware level but not yet serviced by the target CPU. That creates an
interesing race condition:

   CPU 0                  CPU 1               IRQ CHIP

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     release_resources()
                          do_IRQ()
                            -> resources are not available

That might be harmless and just trigger a spurious interrupt warning, but
some interrupt chips might get into a wedged state.

Utilize the existing irq_get_irqchip_state() callback for the
synchronization in free_irq().

synchronize_hardirq() is not using this mechanism as it might actually
deadlock unter certain conditions, e.g. when called with interrupts
disabled and the target CPU is the one on which the synchronization is
invoked. synchronize_irq() uses it because that function cannot be called
from non preemtible contexts as it might sleep.

No functional change intended and according to Marc the existing GIC
implementations where the driver supports the callback should be able
to cope with that core change. Famous last words.

Fixes: 464d12309e ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de
2019-07-03 10:12:29 +02:00
Thomas Gleixner 1d21f2af85 genirq: Fix misleading synchronize_irq() documentation
The function might sleep, so it cannot be called from interrupt
context. Not even with care.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de
2019-07-03 10:12:29 +02:00
Thomas Gleixner 4001d8e876 genirq: Delay deactivation in free_irq()
When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:

There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.

Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.

This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.

Fixes: f8264e3496 ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
2019-07-03 10:12:28 +02:00
Julien Thierry 17ce302f31 arm64: Fix interrupt tracing in the presence of NMIs
In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.

On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).

When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.

Fixes: bc3c03ccb4 ("arm64: Enable the support of pseudo-NMIs")
Cc: <stable@vger.kernel.org> # 5.1.x-
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-21 15:49:58 +01:00
Minwoo Im 0e51833042 genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
The *affd argument is neither used in irq_build_affinity_masks() nor
__irq_build_affinity_masks(). Remove it.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Minwoo Im <minwoo.im@samsung.com>
Cc: linux-block@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602112117.31839-1-minwoo.im.dev@gmail.com
2019-06-12 10:52:45 +02:00
Daniel Lezcano 699785f5d8 genirq/timings: Add selftest for next event computation
The circular buffers are now validated with selftests. The next interrupt
index algorithm which is the hardest part to validate needs extra coverage.

Add a selftest which uses the intervals stored in the arrays and insert all
the values except the last one. The next event computation must return the
same value as the last element which was not inserted.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20190527205521.12091-9-daniel.lezcano@linaro.org
2019-06-12 10:47:05 +02:00
Daniel Lezcano f52da98d90 genirq/timings: Add selftest for irqs circular buffer
After testing the per cpu interrupt circular event, make sure the per
interrupt circular buffer usage is correct.

Add tests to validate the interrupt circular buffer.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20190527205521.12091-8-daniel.lezcano@linaro.org
2019-06-12 10:47:05 +02:00
Daniel Lezcano 6aed82de71 genirq/timings: Add selftest for circular array
Due to the complexity of the code and the difficulty to debug it, add some
selftests to the framework in order to spot issues or regression at boot
time when the runtime testing is enabled for this subsystem.

This tests the circular buffer at the limits and validates:
 - the encoding / decoding of the values
 - the macro to browse the irq timings circular buffer
 - the function to push data in the circular buffer

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20190527205521.12091-7-daniel.lezcano@linaro.org
2019-06-12 10:47:04 +02:00
Daniel Lezcano 23aa3b9a6b genirq/timings: Encapsulate storing function
For the next patches providing the selftest, it is required to insert
interval values directly in the buffer in order to check the correctness of
the code. Encapsulate the code doing that in a always inline function in
order to reuse it in the test code.

No functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20190527205521.12091-6-daniel.lezcano@linaro.org
2019-06-12 10:47:04 +02:00
Daniel Lezcano df025e47e4 genirq/timings: Encapsulate timings push
For the next patches providing the selftest, it is required to artificially
insert timings value in the circular buffer in order to check the
correctness of the code. Encapsulate the common code between the future
test code and the current code with an always-inline tag.

No functional change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20190527205521.12091-5-daniel.lezcano@linaro.org
2019-06-12 10:47:04 +02:00
Daniel Lezcano 3c2e79f4ce genirq/timings: Optimize the period detection speed
With a minimal period and if there is a period which is a multiple of it
but lesser than the max period then it will be detected before and the
minimal period will be never reached.

 1 2 1 2 1 2 1 2 1 2 1 2
 <-----> <-----> <----->
 <-> <-> <-> <-> <-> <->

In that case, the minimum period is 2 and the maximum period is 5. That
means all repeating pattern of 2 will be detected as repeating pattern of
4, it is pointless to go up to 2 when searching for the period as it will
always fail.

Remove one loop iteration by increasing the minimal period to 3.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20190527205521.12091-4-daniel.lezcano@linaro.org
2019-06-12 10:47:03 +02:00
Daniel Lezcano 2840eef051 genirq/timings: Fix timings buffer inspection
It appears the index beginning computation is not correct, the current
code does:

     i = (irqts->count & IRQ_TIMINGS_MASK) - 1

If irqts->count is equal to zero, we end up with an index equal to -1,
but that does not happen because the function checks against zero
before and returns in such case.

However, if irqts->count is a multiple of IRQ_TIMINGS_SIZE, the
resulting & bit op will be zero and leads also to a -1 index.

Re-introduce the iteration loop belonging to the previous variance
code which was correct.

Fixes: bbba0e7c5c "genirq/timings: Add array suffix computation code"
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20190527205521.12091-3-daniel.lezcano@linaro.org
2019-06-12 10:47:03 +02:00