Commit Graph

190 Commits

Author SHA1 Message Date
Christoph Hellwig 75467ee48a dma-direct: improve DMA mask overflow reporting
Remove the unset dma_mask case as that won't get into mapping calls
anymore, and also report the other errors unconditonally and with a
slightly improved message.  Remove the now pointless report_addr helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
2020-02-05 18:53:41 +01:00
Christoph Hellwig 4a47cbae04 dma-direct: improve swiotlb error reporting
Untangle the way how dma_direct_map_page calls into swiotlb to be able
to properly report errors where the swiotlb DMA address overflows the
mask separately from overflows in the !swiotlb case.  This means that
siotlb_map now has to do a little more work that duplicates
dma_direct_map_page, but doing so greatly simplifies the calling
convention.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2020-02-05 18:53:05 +01:00
Christoph Hellwig 91ef26f914 dma-direct: relax addressability checks in dma_direct_supported
dma_direct_supported tries to find the minimum addressable bitmask
based on the end pfn and optional magic that architectures can use
to communicate the size of the magic ZONE_DMA that can be used
for bounce buffering.  But between the DMA offsets that can change
per device (or sometimes even region), the fact the ZONE_DMA isn't
even guaranteed to be the lowest addresses and failure of having
proper interfaces to the MM code this fails at least for one
arm subarchitecture.

As all the legacy DMA implementations have supported 32-bit DMA
masks, and 32-bit masks are guranteed to always work by the API
contract (using bounce buffers if needed), we can short cut the
complicated check and always return true without breaking existing
assumptions.  Hopefully we can properly clean up the interaction
with the arch defined zones and the bootmem allocator eventually.

Fixes: ad3c7b18c5 ("arm: use swiotlb for bounce buffering on LPAE configs")
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2020-02-05 18:50:55 +01:00
Nicolas Saenz Julienne 8c8c5a4994 dma-contiguous: CMA: give precedence to cmdline
Although the device tree might contain a reserved-memory DT node
dedicated as the default CMA pool, users might want to change CMA's
parameters using the kernel command line for debugging purposes and
whatnot. Honor this by bypassing the reserved memory CMA setup, which
will ultimately end up freeing the memblock and allow the command line
CMA configuration routine to run.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-01-30 14:41:42 +01:00
Huang Shijie 964975ac66 lib/genalloc.c: rename addr_in_gen_pool to gen_pool_has_addr
Follow the kernel conventions, rename addr_in_gen_pool to
gen_pool_has_addr.

[sjhuang@iluvatar.ai: fix Documentation/ too]
 Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai
Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:13 -08:00
Linus Torvalds 81b6b96475 dma-mapping updates for 5.5-rc1
- improve dma-debug scalability (Eric Dumazet)
  - tiny dma-debug cleanup (Dan Carpenter)
  - check for vmap memory in dma_map_single (Kees Cook)
  - check for dma_addr_t overflows in dma-direct when using
    DMA offsets (Nicolas Saenz Julienne)
  - switch the x86 sta2x11 SOC to use more generic DMA code
    (Nicolas Saenz Julienne)
  - fix arm-nommu dma-ranges handling (Vladimir Murzin)
  - use __initdata in CMA (Shyam Saini)
  - replace the bus dma mask with a limit (Nicolas Saenz Julienne)
  - merge the remapping helpers into the main dma-direct flow (me)
  - switch xtensa to the generic dma remap handling (me)
  - various cleanups around dma_capable (me)
  - remove unused dev arguments to various dma-noncoherent helpers (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3f+eULHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPyPg/+PVHCrhmepudQQFHu6wfurE5U77iNnoUifvG+b5z5
 5mHmTMkQwyox6rKDe8NuFApAhz1VJDSUgSelPmvTSOIEIGXCvX1p+GqRSVS5YQON
 aLzGvbWKE8hCpaPdDHKYDauD1FZGMM8L2P5oOMF9X9fQ94xxRqfqJM6c8iD16Sgg
 +aOgPNzTnxQHJFF/Dbt/mjJrKXWI+XF+bgUbH+l9yKa7Dd7ibmJR8yl9hs1jmp0H
 1CZ+CizwnAs57rCd1a6Ybc6gj59tySc03NMnnbTko+KDxrcbD3Ee2tpqHVkkCjYz
 Yl0m4FIpbotrpokL/FIS727bVvkjbWgoeM+kiVPoYzmZea3pq/tFDr6tp/BxDhFj
 TZXSFfgQljlYMD3ppSoklFlfjGriVWV0tPO3arPXwuuMF5EX/IMQmvxei05jpc8n
 iELNXOP9iZZkY4tLHy2hn2uWrxBRrS1WQwlLg9hahlNRzyfFSyHeP0zWlVDt+RgF
 5CCbEI+HQcUqg1FApB30lQNWTn1+dJftrpKVBlgNBIyIa/z2rFbt8GdSnItxjfQX
 /XX8EZbFvF6AcXkgURkYFIoKM/EbYShOSLcYA3PTUtcuTnF6Kk5eimySiGWZTVCS
 prruSFDZJOvL3SnOIMIiYVmBdB7lEbDyLI/VYuhoECXEDCJpVmRktNkJNg4q6/E+
 fjQ=
 =e5wO
 -----END PGP SIGNATURE-----

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - improve dma-debug scalability (Eric Dumazet)

 - tiny dma-debug cleanup (Dan Carpenter)

 - check for vmap memory in dma_map_single (Kees Cook)

 - check for dma_addr_t overflows in dma-direct when using DMA offsets
   (Nicolas Saenz Julienne)

 - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
   Saenz Julienne)

 - fix arm-nommu dma-ranges handling (Vladimir Murzin)

 - use __initdata in CMA (Shyam Saini)

 - replace the bus dma mask with a limit (Nicolas Saenz Julienne)

 - merge the remapping helpers into the main dma-direct flow (me)

 - switch xtensa to the generic dma remap handling (me)

 - various cleanups around dma_capable (me)

 - remove unused dev arguments to various dma-noncoherent helpers (me)

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:

* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
  dma-mapping: treat dev->bus_dma_mask as a DMA limit
  dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
  dma-direct: don't check swiotlb=force in dma_direct_map_resource
  dma-debug: clean up put_hash_bucket()
  powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
  dma-direct: avoid a forward declaration for phys_to_dma
  dma-direct: unify the dma_capable definitions
  dma-mapping: drop the dev argument to arch_sync_dma_for_*
  x86/PCI: sta2x11: use default DMA address translation
  dma-direct: check for overflows on 32 bit DMA addresses
  dma-debug: increase HASH_SIZE
  dma-debug: reorder struct dma_debug_entry fields
  xtensa: use the generic uncached segment support
  dma-mapping: merge the generic remapping helpers into dma-direct
  dma-direct: provide mmap and get_sgtable method overrides
  dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
  dma-direct: remove __dma_direct_free_pages
  usb: core: Remove redundant vmap checks
  kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
  dma-debug: add a schedule point in debug_dma_dump_mappings()
  ...
2019-11-28 11:16:43 -08:00
Linus Torvalds 436b2a8039 Printk changes for 5.5
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl3bpjoACgkQUqAMR0iA
 lPJJDA/+IJT4YCRp2TwV2jvIs0QzvXZrzEsxgCLibLE85mYTJgoQBD3W1bH2eyjp
 T/9U0Zh5PGr/84cHd4qiMxzo+5Olz930weG59NcO4RJBSr671aRYs5tJqwaQAZDR
 wlwaob5S28vUmjPxKulvxv6V3FdI79ZE9xrCOCSTQvz4iCLsGOu+Dn/qtF64pImX
 M/EXzPMBrByiQ8RTM4Ege8JoBqiCZPDG9GR3KPXIXQwEeQgIoeYxwRYakxSmSzz8
 W8NduFCbWavg/yHhghHikMiyOZeQzAt+V9k9WjOBTle3TGJegRhvjgI7508q3tXe
 jQTMGATBOPkIgFaZz7eEn/iBa3jZUIIOzDY93RYBmd26aBvwKLOma/Vkg5oGYl0u
 ZK+CMe+/xXl7brQxQ6JNsQhbSTjT+746LvLJlCvPbbPK9R0HeKNhsdKpGY3ugnmz
 VAnOFIAvWUHO7qx+J+EnOo5iiPpcwXZj4AjrwVrs/x5zVhzwQ+4DSU6rbNn0O1Ak
 ELrBqCQkQzh5kqK93jgMHeWQ9EOUp1Lj6PJhTeVnOx2x8tCOi6iTQFFrfdUPlZ6K
 2DajgrFhti4LvwVsohZlzZuKRm5EuwReLRSOn7PU5qoSm5rcouqMkdlYG/viwyhf
 mTVzEfrfemrIQOqWmzPrWEXlMj2mq8oJm4JkC+jJ/+HsfK4UU8I=
 =QCEy
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

Pull printk updates from Petr Mladek:

 - Allow to print symbolic error names via new %pe modifier.

 - Use pr_warn() instead of the remaining pr_warning() calls. Fix
   formatting of the related lines.

 - Add VSPRINTF entry to MAINTAINERS.

* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
  checkpatch: don't warn about new vsprintf pointer extension '%pe'
  MAINTAINERS: Add VSPRINTF
  tools lib api: Renaming pr_warning to pr_warn
  ASoC: samsung: Use pr_warn instead of pr_warning
  lib: cpu_rmap: Use pr_warn instead of pr_warning
  trace: Use pr_warn instead of pr_warning
  dma-debug: Use pr_warn instead of pr_warning
  vgacon: Use pr_warn instead of pr_warning
  fs: afs: Use pr_warn instead of pr_warning
  sh/intc: Use pr_warn instead of pr_warning
  scsi: Use pr_warn instead of pr_warning
  platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
  platform/x86: asus-laptop: Use pr_warn instead of pr_warning
  platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
  oprofile: Use pr_warn instead of pr_warning
  of: Use pr_warn instead of pr_warning
  macintosh: Use pr_warn instead of pr_warning
  idsn: Use pr_warn instead of pr_warning
  ide: Use pr_warn instead of pr_warning
  crypto: n2: Use pr_warn instead of pr_warning
  ...
2019-11-25 19:40:40 -08:00
Nicolas Saenz Julienne a7ba70f178 dma-mapping: treat dev->bus_dma_mask as a DMA limit
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.

With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.

In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-21 18:14:35 +01:00
Christoph Hellwig d7293f79ca Merge branch 'for-next/zone-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into dma-mapping-for-next
Pull in a stable branch from the arm64 tree that adds the zone_dma_bits
variable to avoid creating hard to resolve conflicts with that addition.
2019-11-21 18:13:03 +01:00
Christoph Hellwig 68a33b1794 dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
The valid memory address check in dma_capable only makes sense when mapping
normal memory, not when using dma_map_resource to map a device resource.
Add a new boolean argument to dma_capable to exclude that check for the
dma_map_resource case.

Fixes: b12d66278d ("dma-direct: check for overflows on 32 bit DMA addresses")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-11-20 20:31:41 +01:00
Christoph Hellwig 4268ac6ae5 dma-direct: don't check swiotlb=force in dma_direct_map_resource
When mapping resources we can't just use swiotlb ram for bounce
buffering.  Switch to a direct dma_capable check instead.

Fixes: cfced78696 ("dma-mapping: remove the default map_resource implementation")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-11-20 20:31:41 +01:00
Dan Carpenter 50f579a239 dma-debug: clean up put_hash_bucket()
The put_hash_bucket() is a bit cleaner if it takes an unsigned long
directly instead of a pointer to unsigned long.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-20 20:31:41 +01:00
Christoph Hellwig 56e35f9c5b dma-mapping: drop the dev argument to arch_sync_dma_for_*
These are pure cache maintainance routines, so drop the unused
struct device argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-20 20:31:38 +01:00
Eric Dumazet 5e76f56457 dma-debug: increase HASH_SIZE
With modern NIC, it is not unusual having about ~256,000 active dma
mappings and a hash size of 1024 buckets is too small.

Forcing full cache line per bucket does not seem useful, especially now
that we have contention on free_entries_lock for allocations and freeing
of entries.  Better use the space to fit more buckets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-11 10:52:18 +01:00
Eric Dumazet d3694f3073 dma-debug: reorder struct dma_debug_entry fields
Move all fields used during exact match lookups to the first cache line.
This makes debug_dma_mapping_error() and friends about 50% faster.

Since it removes two 32bit holes, force a cacheline alignment on struct
dma_debug_entry.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-11 10:52:18 +01:00
Christoph Hellwig 3acac06550 dma-mapping: merge the generic remapping helpers into dma-direct
Integrate the generic dma remapping implementation into the main flow.
This prepares for architectures like xtensa that use an uncached
segment for pages in the kernel mapping, but can also remap highmem
from CMA.  To simplify that implementation we now always deduct the
page from the physical address via the DMA address instead of the
virtual address.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-11 10:52:18 +01:00
Christoph Hellwig 34dc0ea6bc dma-direct: provide mmap and get_sgtable method overrides
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode.  Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook.  Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables.  This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-11 10:52:15 +01:00
Christoph Hellwig 4e1003aa56 dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
The argument isn't used anywhere, so stop passing it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-07 17:25:57 +01:00
Christoph Hellwig acaade1af3 dma-direct: remove __dma_direct_free_pages
We can just call dma_free_contiguous directly instead of wrapping it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-07 17:25:40 +01:00
Nicolas Saenz Julienne 8b5369ea58 dma/direct: turn ARCH_ZONE_DMA_BITS into a variable
Some architectures, notably ARM, are interested in tweaking this
depending on their runtime DMA addressing limitations.

Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-11-01 09:41:18 +00:00
Shyam Saini ca66536845 kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
These parameters are only referenced by __init routine calls during
early boot so they should be marked as __initdata and __initconst
accordingly.

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-30 11:10:45 -07:00
Eric Dumazet 9ff6aa027d dma-debug: add a schedule point in debug_dma_dump_mappings()
debug_dma_dump_mappings() can take a lot of cpu cycles :

lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump

real	0m0.463s
user	0m0.003s
sys	0m0.459s

Let's add a cond_resched() to avoid holding cpu for too long.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-30 11:09:35 -07:00
Vladimir Murzin a445e940ea dma-mapping: fix handling of dma-ranges for reserved memory (again)
Daniele reported that issue previously fixed in c41f9ea998
("drivers: dma-coherent: Account dma_pfn_offset when used with device
tree") reappear shortly after 43fc509c3e ("dma-coherent: introduce
interface for default DMA pool") where fix was accidentally dropped.

Lets put fix back in place and respect dma-ranges for reserved memory.

Fixes: 43fc509c3e ("dma-coherent: introduce interface for default DMA pool")

Reported-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Tested-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-30 11:07:35 -07:00
Kefeng Wang fc65104c7c dma-debug: Use pr_warn instead of pr_warning
As said in commit f2c2cbcc35 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.

Link: http://lkml.kernel.org/r/20191018031850.48498-25-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-18 15:01:56 +02:00
Andrey Smirnov 2cf2aa6a69 dma-mapping: fix false positivse warnings in dma_common_free_remap()
Commit 5cf4537975 ("dma-mapping: introduce a dma_common_find_pages
helper") changed invalid input check in dma_common_free_remap() from:

    if (!area || !area->flags != VM_DMA_COHERENT)

to

    if (!area || !area->flags != VM_DMA_COHERENT || !area->pages)

which seem to produce false positives for memory obtained via
dma_common_contiguous_remap()

This triggers the following warning message when doing "reboot" on ZII
VF610 Dev Board Rev B:

WARNING: CPU: 0 PID: 1 at kernel/dma/remap.c:112 dma_common_free_remap+0x88/0x8c
trying to free invalid coherent area: 9ef82980
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.3.0-rc6-next-20190820 #119
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
Backtrace:
[<8010d1ec>] (dump_backtrace) from [<8010d588>] (show_stack+0x20/0x24)
 r7:8015ed78 r6:00000009 r5:00000000 r4:9f4d9b14
[<8010d568>] (show_stack) from [<8077e3f0>] (dump_stack+0x24/0x28)
[<8077e3cc>] (dump_stack) from [<801197a0>] (__warn.part.3+0xcc/0xe4)
[<801196d4>] (__warn.part.3) from [<80119830>] (warn_slowpath_fmt+0x78/0x94)
 r6:00000070 r5:808e540c r4:81c03048
[<801197bc>] (warn_slowpath_fmt) from [<8015ed78>] (dma_common_free_remap+0x88/0x8c)
 r3:9ef82980 r2:808e53e0
 r7:00001000 r6:a0b1e000 r5:a0b1e000 r4:00001000
[<8015ecf0>] (dma_common_free_remap) from [<8010fa9c>] (remap_allocator_free+0x60/0x68)
 r5:81c03048 r4:9f4d9b78
[<8010fa3c>] (remap_allocator_free) from [<801100d0>] (__arm_dma_free.constprop.3+0xf8/0x148)
 r5:81c03048 r4:9ef82900
[<8010ffd8>] (__arm_dma_free.constprop.3) from [<80110144>] (arm_dma_free+0x24/0x2c)
 r5:9f563410 r4:80110120
[<80110120>] (arm_dma_free) from [<8015d80c>] (dma_free_attrs+0xa0/0xdc)
[<8015d76c>] (dma_free_attrs) from [<8020f3e4>] (dma_pool_destroy+0xc0/0x154)
 r8:9efa8860 r7:808f02f0 r6:808f02d0 r5:9ef82880 r4:9ef82780
[<8020f324>] (dma_pool_destroy) from [<805525d0>] (ehci_mem_cleanup+0x6c/0x150)
 r7:9f563410 r6:9efa8810 r5:00000000 r4:9efd0148
[<80552564>] (ehci_mem_cleanup) from [<80558e0c>] (ehci_stop+0xac/0xc0)
 r5:9efd0148 r4:9efd0000
[<80558d60>] (ehci_stop) from [<8053c4bc>] (usb_remove_hcd+0xf4/0x1b0)
 r7:9f563410 r6:9efd0074 r5:81c03048 r4:9efd0000
[<8053c3c8>] (usb_remove_hcd) from [<8056361c>] (host_stop+0x48/0xb8)
 r7:9f563410 r6:9efd0000 r5:9f5f4040 r4:9f5f5040
[<805635d4>] (host_stop) from [<80563d0c>] (ci_hdrc_host_destroy+0x34/0x38)
 r7:9f563410 r6:9f5f5040 r5:9efa8800 r4:9f5f4040
[<80563cd8>] (ci_hdrc_host_destroy) from [<8055ef18>] (ci_hdrc_remove+0x50/0x10c)
[<8055eec8>] (ci_hdrc_remove) from [<804a2ed8>] (platform_drv_remove+0x34/0x4c)
 r7:9f563410 r6:81c4f99c r5:9efa8810 r4:9efa8810
[<804a2ea4>] (platform_drv_remove) from [<804a18a8>] (device_release_driver_internal+0xec/0x19c)
 r5:00000000 r4:9efa8810
[<804a17bc>] (device_release_driver_internal) from [<804a1978>] (device_release_driver+0x20/0x24)
 r7:9f563410 r6:81c41ed0 r5:9efa8810 r4:9f4a1dac
[<804a1958>] (device_release_driver) from [<804a01b8>] (bus_remove_device+0xdc/0x108)
[<804a00dc>] (bus_remove_device) from [<8049c204>] (device_del+0x150/0x36c)
 r7:9f563410 r6:81c03048 r5:9efa8854 r4:9efa8810
[<8049c0b4>] (device_del) from [<804a3368>] (platform_device_del.part.2+0x20/0x84)
 r10:9f563414 r9:809177e0 r8:81cb07dc r7:81c78320 r6:9f563454 r5:9efa8800
 r4:9efa8800
[<804a3348>] (platform_device_del.part.2) from [<804a3420>] (platform_device_unregister+0x28/0x34)
 r5:9f563400 r4:9efa8800
[<804a33f8>] (platform_device_unregister) from [<8055dce0>] (ci_hdrc_remove_device+0x1c/0x30)
 r5:9f563400 r4:00000001
[<8055dcc4>] (ci_hdrc_remove_device) from [<805652ac>] (ci_hdrc_imx_remove+0x38/0x118)
 r7:81c78320 r6:9f563454 r5:9f563410 r4:9f541010
[<8056538c>] (ci_hdrc_imx_shutdown) from [<804a2970>] (platform_drv_shutdown+0x2c/0x30)
[<804a2944>] (platform_drv_shutdown) from [<8049e4fc>] (device_shutdown+0x158/0x1f0)
[<8049e3a4>] (device_shutdown) from [<8013ac80>] (kernel_restart_prepare+0x44/0x48)
 r10:00000058 r9:9f4d8000 r8:fee1dead r7:379ce700 r6:81c0b280 r5:81c03048
 r4:00000000
[<8013ac3c>] (kernel_restart_prepare) from [<8013ad14>] (kernel_restart+0x1c/0x60)
[<8013acf8>] (kernel_restart) from [<8013af84>] (__do_sys_reboot+0xe0/0x1d8)
 r5:81c03048 r4:00000000
[<8013aea4>] (__do_sys_reboot) from [<8013b0ec>] (sys_reboot+0x18/0x1c)
 r8:80101204 r7:00000058 r6:00000000 r5:00000000 r4:00000000
[<8013b0d4>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0x9f4d9fa8 to 0x9f4d9ff0)
9fa0:                   00000000 00000000 fee1dead 28121969 01234567 379ce700
9fc0: 00000000 00000000 00000000 00000058 00000000 00000000 00000000 00016d04
9fe0: 00028e0c 7ec87c64 000135ec 76c1f410

Restore original invalid input check in dma_common_free_remap() to
avoid this problem.

Fixes: 5cf4537975 ("dma-mapping: introduce a dma_common_find_pages helper")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[hch: just revert the offending hunk instead of creating a new helper]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-05 10:24:17 +02:00
Linus Torvalds 45824fc0da powerpc updates for 5.4
- Initial support for running on a system with an Ultravisor, which is software
    that runs below the hypervisor and protects guests against some attacks by
    the hypervisor.
 
  - Support for building the kernel to run as a "Secure Virtual Machine", ie. as
    a guest capable of running on a system with an Ultravisor.
 
  - Some changes to our DMA code on bare metal, to allow devices with medium
    sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space.
 
  - Support for firmware assisted crash dumps on bare metal (powernv).
 
  - Two series fixing bugs in and refactoring our PCI EEH code.
 
  - A large series refactoring our exception entry code to use gas macros, both
    to make it more readable and also enable some future optimisations.
 
 As well as many cleanups and other minor features & fixups.
 
 Thanks to:
   Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh
   Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin
   Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy,
   Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens,
   David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar,
   Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari
   Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras,
   Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
   Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor,
   Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram
   Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj,
   Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung
   Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl2EtEcTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPfsD/9uXyBXn3anI/H08+mk74k5gCsmMQpn
 D442CD/ByogZcccp23yBTlhawtCE03hcHnCLygn0Xgd8a4YvHts/RGHUe3fPHqlG
 bEyZ7jsLVz5ebNZQP7r4eGs2pSzCajwJy2N9HJ/C1ojf15rrfRxoVJtnyhE2wXpm
 DL+6o2K+nUCB3gTQ1Inr3DnWzoGOOUfNTOea2u+J+yfHwGRqOBYpevwqiwy5eelK
 aRjUJCqMTvrzra49MeFwjo0Nt3/Y8UNcwA+JlGdeR8bRuWhFrYmyBRiZEKPaujNO
 5EAfghBBlB0KQCqvF/tRM/c0OftHqK59AMobP9T7u9oOaBXeF/FpZX/iXjzNDPsN
 j9Oo2tKLTu/YVEXqBFuREGP+znANr1Wo4CFyOG8SbvYz0HFjR6XbtRJsS+0e8GWl
 kqX5/ZhYz3lBnKSNe9jgWOrh/J0KCSFigBTEWJT3xsn4YE8x8kK2l9KPqAIldWEP
 sKb2UjGS7v0NKq+NvShH88Q9AeQUEIjTcg/9aDDQDe6FaRQ7KiF8bUxSdwSPi+Fn
 j0lnF6i+1ATWZKuCr85veVi7C5qoe/+MqalnmP7MxULyzgXLLxUgN0SzEYO6QofK
 LQK/VaH2XVr5+M5YAb7K4/NX5gbM3s1bKrCiUy4EyHNvgG7gricYdbz6HgAjKpR7
 oP0rHfgmVYvF1g==
 =WlW+
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "This is a bit late, partly due to me travelling, and partly due to a
  power outage knocking out some of my test systems *while* I was
  travelling.

   - Initial support for running on a system with an Ultravisor, which
     is software that runs below the hypervisor and protects guests
     against some attacks by the hypervisor.

   - Support for building the kernel to run as a "Secure Virtual
     Machine", ie. as a guest capable of running on a system with an
     Ultravisor.

   - Some changes to our DMA code on bare metal, to allow devices with
     medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
     DMA space.

   - Support for firmware assisted crash dumps on bare metal (powernv).

   - Two series fixing bugs in and refactoring our PCI EEH code.

   - A large series refactoring our exception entry code to use gas
     macros, both to make it more readable and also enable some future
     optimisations.

  As well as many cleanups and other minor features & fixups.

  Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
  Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
  Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
  JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
  Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
  Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
  Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
  Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
  Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
  Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
  Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
  Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
  Lendacky, Vasant Hegde"

* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
  powerpc/mm/mce: Keep irqs disabled during lockless page table walk
  powerpc: Use ftrace_graph_ret_addr() when unwinding
  powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
  ftrace: Look up the address of return_to_handler() using helpers
  powerpc: dump kernel log before carrying out fadump or kdump
  docs: powerpc: Add missing documentation reference
  powerpc/xmon: Fix output of XIVE IPI
  powerpc/xmon: Improve output of XIVE interrupts
  powerpc/mm/radix: remove useless kernel messages
  powerpc/fadump: support holes in kernel boot memory area
  powerpc/fadump: remove RMA_START and RMA_END macros
  powerpc/fadump: update documentation about option to release opalcore
  powerpc/fadump: consider f/w load area
  powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
  powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
  powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
  powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
  powerpc/fadump: improve how crashed kernel's memory is reserved
  powerpc/fadump: consider reserved ranges while releasing memory
  powerpc/fadump: make crash memory ranges array allocation generic
  ...
2019-09-20 11:48:06 -07:00
Linus Torvalds 671df18953 dma-mapping updates for 5.4:
- add dma-mapping and block layer helpers to take care of IOMMU
    merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
  - rework handling of the pgprot bits for remapping (me)
  - take care of the dma direct infrastructure for swiotlb-xen (me)
  - improve the dma noncoherent remapping infrastructure (me)
  - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
  - cleanup mmaping of coherent DMA allocations (me)
  - various misc cleanups (Andy Shevchenko, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl2CSucLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPfrhAAgXZA/EdFPvkkCoDrmgtf3XkudX9gajeCd9g4NZy6
 ZBQElTVvm4S0sQj7IXgALnMumDMbbTibW5SQLX5GwQDe+XXBpZ8ajpAnJAXc8a5T
 qaFQ4SInr4CgBZf9nZKDkbSBZ1Tu3AQm1c0QI8riRCkrVTuX4L06xpCef4Yh4mgO
 rwWEjIioYpQiKZMmu98riXh3ZNfFG3mVJRhKt8B6XJbBgnUnjDOPYGgaUwp6CU20
 tFBKL2GaaV0vdLJ5wYhIGXT4DJ8tp9T5n3IYGZv1Ux889RaZEHlCrMxzelYeDbCT
 KhZbhcSECGnddsh73t/UX7/KhytuqnfKa9n+Xo6AWuA47xO4c36quOOcTk9M0vE5
 TfGDmewgL6WIv4lzokpRn5EkfDhyL33j8eYJrJ8e0ldcOhSQIFk4ciXnf2stWi6O
 JrlzzzSid+zXxu48iTfoPdnMr7psTpiMvvRvKfEeMp2FX9Fg6EdMzJYLTEl+COHB
 0WwNacZmY3P01+b5EZXEgqKEZevIIdmPKbyM9rPtTjz8BjBwkABHTpN3fWbVBf7/
 Ax6OPYyW40xp1fnJuzn89m3pdOxn88FpDdOaeLz892Zd+Qpnro1ayulnFspVtqGM
 mGbzA9whILvXNRpWBSQrvr2IjqMRjbBxX3BVACl3MMpOChgkpp5iANNfSDjCftSF
 Zu8=
 =/wGv
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
2019-09-19 13:27:23 -07:00
Joerg Roedel e95adb9add Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next 2019-09-11 12:39:19 +02:00
Lu Baolu 3fc1ca0065 swiotlb: Split size parameter to map/unmap APIs
This splits the size parameter to swiotlb_tbl_map_single() and
swiotlb_tbl_unmap_single() into an alloc_size and a mapping_size
parameter, where the latter one is rounded up to the iommu page
size.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-11 12:34:29 +02:00
Christoph Hellwig 5cf4537975 dma-mapping: introduce a dma_common_find_pages helper
A helper to find the backing page array based on a virtual address.
This also ensures we do the same vm_flags check everywhere instead
of slightly different or missing ones in a few places.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:20 +02:00
Christoph Hellwig 512317401f dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
Currently the generic dma remap allocator gets a vm_flags passed by
the caller that is a little confusing.  We just introduced a generic
vmalloc-level flag to identify the dma coherent allocations, so use
that everywhere and remove the now pointless argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:20 +02:00
Christoph Hellwig 249baa5479 dma-mapping: provide a better default ->get_required_mask
Most dma_map_ops instances are IOMMUs that work perfectly fine in 32-bits
of IOVA space, and the generic direct mapping code already provides its
own routines that is intelligent based on the amount of memory actually
present.  Wire up the dma-direct routine for the ARM direct mapping code
as well, and otherwise default to the constant 32-bit mask.  This way
we only need to override it for the occasional odd IOMMU that requires
64-bit IOVA support, or IOMMU drivers that are more efficient if they
can fall back to the direct mapping.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig d9295532d5 dma-mapping: remove the dma_declare_coherent_memory export
dma_declare_coherent_memory is something that the platform setup code
(which pretty much means the device tree these days) need to do so that
drivers can use the memory as declared by the platform.  Drivers
themselves have no business calling this function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig 7a01ee4220 dma-mapping: remove the dma_mmap_from_dev_coherent export
dma_mmap_from_dev_coherent is only used by dma_map_ops instances,
none of which is modular.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig 1fa0682448 dma-mapping: remove dma_release_declared_memory
This function is entirely unused given that declared memory is
generally provided by platform setup code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Christoph Hellwig 62fcee9a3b dma-mapping: remove CONFIG_ARCH_NO_COHERENT_DMA_MMAP
CONFIG_ARCH_NO_COHERENT_DMA_MMAP is now functionally identical to
!CONFIG_MMU, so remove the separate symbol.  The only difference is that
arm did not set it for !CONFIG_MMU, but arm uses a separate dma mapping
implementation including its own mmap method, which is handled by moving
the CONFIG_MMU check in dma_can_mmap so that is only applies to the
dma-direct case, just as the other ifdefs for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	# m68k
2019-09-04 11:13:18 +02:00
Christoph Hellwig e29ccc188f dma-mapping: add a dma_can_mmap helper
Add a helper to check if DMA allocations for a specific device can be
mapped to userspace using dma_mmap_*.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:18 +02:00
Christoph Hellwig f9f3232a7d dma-mapping: explicitly wire up ->mmap and ->get_sgtable
While the default ->mmap and ->get_sgtable implementations work for the
majority of our dma_map_ops impementations they are inherently safe
for others that don't use the page allocator or CMA and/or use their
own way of remapping not covered by the common code.  So remove the
defaults if these methods are not wired up, but instead wire up the
default implementations for all safe instances.

Fixes: e1c7e32453 ("dma-mapping: always provide the dma_map_ops based implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:18 +02:00
Christoph Hellwig 1445146701 dma-mapping: move the dma_get_sgtable API comments from arm to common code
The comments are spot on and should be near the central API, not just
near a single implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:17 +02:00
Yoshihiro Shimoda 6ba99411b8 dma-mapping: introduce dma_get_merge_boundary()
This patch adds a new DMA API "dma_get_merge_boundary". This function
returns the DMA merge boundary if the DMA layer can merge the segments.
This patch also adds the implementation for a new dma_map_ops pointer.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-03 08:33:01 +02:00
Christoph Hellwig 8e3a68fb55 dma-mapping: make dma_atomic_pool_init self-contained
The memory allocated for the atomic pool needs to have the same
mapping attributes that we use for remapping, so use
pgprot_dmacoherent instead of open coding it.  Also deduct a
suitable zone to allocate the memory from based on the presence
of the DMA zones.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-29 16:43:33 +02:00
Christoph Hellwig 419e2f1838 dma-mapping: remove arch_dma_mmap_pgprot
arch_dma_mmap_pgprot is used for two things:

 1) to override the "normal" uncached page attributes for mapping
    memory coherent to devices that can't snoop the CPU caches
 2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older
    arm systems and some mips platforms

Replace one with the pgprot_dmacoherent macro that is already provided
by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE
handling to common code with an explicit arch opt-in.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	# m68k
Acked-by: Paul Burton <paul.burton@mips.com>		# mips
2019-08-29 16:43:22 +02:00
Christoph Hellwig 90ae409f9e dma-direct: fix zone selection after an unaddressable CMA allocation
The new dma_alloc_contiguous hides if we allocate CMA or regular
pages, and thus fails to retry a ZONE_NORMAL allocation if the CMA
allocation succeeds but isn't addressable.  That means we either fail
outright or dip into a small zone that might not succeed either.

Thanks to Hillf Danton for debugging this issue.

Fixes: b1d2dc009d ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
2019-08-21 07:14:10 +09:00
Christoph Hellwig 33dcb37cef dma-mapping: fix page attributes for dma_mmap_*
All the way back to introducing dma_common_mmap we've defaulted to mark
the pages as uncached.  But this is wrong for DMA coherent devices.
Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that
flag is only treated special on the alloc side for non-coherent devices.

Introduce a new dma_pgprot helper that deals with the check for coherent
devices so that only the remapping cases ever reach arch_dma_mmap_pgprot
and we thus ensure no aliasing of page attributes happens, which makes
the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the
remaining ones.

Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but
we'll phase it out soon.

Fixes: 64ccc9c033 ("common: dma-mapping: add support for generic dma_mmap_* calls")
Reported-by: Shawn Anastasio <shawn@anastas.io>
Reported-by: Gavin Li <git@thegavinli.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-08-10 19:52:45 +02:00
Lucas Stach d8ad55538a dma-direct: don't truncate dma_required_mask to bus addressing capabilities
The dma required_mask needs to reflect the actual addressing capabilities
needed to handle the whole system RAM. When truncated down to the bus
addressing capabilities dma_addressing_limited() will incorrectly signal
no limitations for devices which are restricted by the bus_dma_mask.

Fixes: b4ebe60632 (dma-direct: implement complete bus_dma_mask handling)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-10 19:52:45 +02:00
Christoph Hellwig cf14be0b41 dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
The new DMA_ATTR_NO_KERNEL_MAPPING needs to actually assign
a dma_addr to work.  Also skip it if the architecture needs
forced decryption handling, as that needs a kernel virtual
address.

Fixes: d98849aff8 (dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2019-08-10 19:52:45 +02:00
Thiago Jung Bauermann e740815a97 dma-mapping: Remove dma_check_mask()
sme_active() is an x86-specific function so it's better not to call it from
generic code. Christoph Hellwig mentioned that "There is no reason why we
should have a special debug printk just for one specific reason why there
is a requirement for a large DMA mask.", so just remove dma_check_mask().

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-4-bauerman@linux.ibm.com
2019-08-09 22:52:07 +10:00
Thiago Jung Bauermann 47e5d8f9ed swiotlb: Remove call to sme_active()
sme_active() is an x86-specific function so it's better not to call it from
generic code.

There's no need to mention which memory encryption feature is active, so
just use a more generic message. Besides, other architectures will have
different names for similar technology.

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-3-bauerman@linux.ibm.com
2019-08-09 22:52:06 +10:00
Linus Torvalds 234172f6bb add swiotlb support to arm
This fixes a cascade of regressions that originally started with
 the addition of the ia64 port, but only got fatal once we removed
 most uses of block layer bounce buffering in Linux 4.18.
 
 The reason is that while the original i386/PAE code that was the first
 architecture that supported > 4GB of memory without an iommu decided to
 leave bounce buffering to the subsystems, which in those days just mean
 block and networking as no one else consumer arbitrary userspace memory.
 
 Later with ia64, x86_64 and other ports we assumed that either an iommu
 or something that fakes it up ("software IOTLB" in beautiful Intel
 speak) is present and that subsystems can rely on that for dealing with
 addressing limitations in devices.   Except that the ARM LPAE scheme
 that added larger physical address to 32-bit ARM did not follow that
 scheme and thus only worked by chance and only for block and networking
 I/O directly to highmem.
 
 Long story, short fix - add swiotlb support to arm when build for LPAE
 platforms, which actuallys turns out to be pretty trivial with the
 modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl1DFj8LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPFqg/+Oh62VCFCkIK07NAeTq6EmrfHI8I1Wm/SFWPOOB+a
 vm7nMcSG3C8K8PRHzGc6Zk3SC1+RrHghcyKw54yLT1Mhroakv6Um7p2y8S3M4tmZ
 uEg8yYbtzxvuaY9T42s2msZURbBCEELzA2bYbQzgQ1zczRI1zuMI07ssMr91IQ91
 HC1OjAUoxUkp/+2uU/X2k6DvPQLSJSyWvKgbi1bjNpE+FRCKJP+2a2K3psBQuDBe
 aJXiz/kD2L/JNvF/e4c414d5GnGXwtIYs1kbskmnj3LeToS+JjX+6ZcENorpScIP
 c20s/3H6nsb14TFy548rJUlAHdcd9kOdeTw+0oPUliNLCogGs6FKNU4N5gVAo+bC
 AWDP0wMHMWkrVz6lQL9PR78IHrHOxFYS5/uHsqqdKo5YTsgaHnwKEiPxX1aiKQ67
 ovUrOnGRo4R9Y4YwD+BbHY9qw9jFMqazBdLWMivK5NxqltsahOug8w2emTFfXzQn
 m4APJYa0RVJA4mkh3ejcci5qHyyzPOjslyIJn7eaJPV2rknkxRn9UngkgJLnzHfc
 +lKiD1zaRy82nV4auPjYRiOdAoQN40YFB/RT16OVkjkT+jJEE2UAMjqh2SRlRusp
 Ce8vK7pw6VpDNGJRQveQA+1n9OR/jl0Jf8R7GFRrf9c/bM1J8GErJ6xS/EwNPrgI
 5dE=
 =D6Uy
 -----END PGP SIGNATURE-----

Merge tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping

Pull arm swiotlb support from Christoph Hellwig:
 "This fixes a cascade of regressions that originally started with the
  addition of the ia64 port, but only got fatal once we removed most
  uses of block layer bounce buffering in Linux 4.18.

  The reason is that while the original i386/PAE code that was the first
  architecture that supported > 4GB of memory without an iommu decided
  to leave bounce buffering to the subsystems, which in those days just
  mean block and networking as no one else consumed arbitrary userspace
  memory.

  Later with ia64, x86_64 and other ports we assumed that either an
  iommu or something that fakes it up ("software IOTLB" in beautiful
  Intel speak) is present and that subsystems can rely on that for
  dealing with addressing limitations in devices. Except that the ARM
  LPAE scheme that added larger physical address to 32-bit ARM did not
  follow that scheme and thus only worked by chance and only for block
  and networking I/O directly to highmem.

  Long story, short fix - add swiotlb support to arm when build for LPAE
  platforms, which actuallys turns out to be pretty trivial with the
  modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression"

* tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping:
  arm: use swiotlb for bounce buffering on LPAE configs
  dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}
2019-08-02 08:44:33 -07:00
Nicolin Chen f46cc01525 dma-contiguous: page-align the size in dma_free_contiguous()
According to the original dma_direct_alloc_pages() code:
{
	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;

	if (!dma_release_from_contiguous(dev, page, count))
		__free_pages(page, get_order(size));
}

The count parameter for dma_release_from_contiguous() was page
aligned before the right-shifting operation, while the new API
dma_free_contiguous() forgets to have PAGE_ALIGN() at the size.

So this patch simply adds it to prevent any corner case.

Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-29 09:50:04 +03:00