The sync_exp_work_done() function uses smp_mb__before_atomic(), but
there is no obvious atomic in the ensuing code. The ordering is
absolutely required for grace periods to work correctly, so this
commit upgrades the smp_mb__before_atomic() to smp_mb().
Fixes: 6fba2b3767 ("rcu: Remove deprecated RCU debugfs tracing code")
Reported-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Various security techniques can obfuscate pointer printouts on the
console. Unfortunately, rcutorture relies on either "null" or all zeroes
to identify the last few statistics printouts at the end of the test.
These need to be identified because failing to do so will results in
false-positive complaints about grace-period hangs.
This commit therefore prints the "ver:" in capitals ("VER:") when
the RCU-protected pointer has been set to NULL, which causes rcutorture's
parse-console.sh script to correctly ignore these lines.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
I have been showing off a trivial RCU implementation for non-preemptive
environments for some time now:
#define rcu_read_lock()
#define rcu_read_unlock()
#define rcu_dereference(p) READ_ONCE(p)
#define rcu_assign_pointer(p, v) smp_store_release(&(p), (v))
void synchronize_rcu(void)
{
int cpu;
for_each_online_cpu(cpu)
sched_setaffinity(current->pid, cpumask_of(cpu));
}
Trivial or not, as the old saying goes, "if it ain't tested, it don't
work!". This commit therefore adds a "trivial" flavor to rcutorture
and a corresponding TRIVIAL test scenario. This variant does not handle
CPU hotplug, which is unconditionally enabled on x86 for post-v5.1-rc3
kernels, which is why the TRIVIAL.boot says "rcutorture.onoff_interval=0".
This commit actually does handle CONFIG_PREEMPT=y kernels, but only
because it turns back the Linux-kernel clock in order to provide these
alternative definitions (or the moral equivalent thereof):
#define rcu_read_lock() preempt_disable()
#define rcu_read_unlock() preempt_enable()
In CONFIG_PREEMPT=n kernels without debugging, these are equivalent to
empty macros give or take a compiler barrier. However, the have been
successfully tested with actual empty macros as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix symbol issue reported by kbuild test robot <lkp@intel.com>. ]
[ paulmck: Work around sched_setaffinity() issue noted by Andrea Parri. ]
[ paulmck: Add rcutorture.shuffle_interval=0 to TRIVIAL.boot to fix
interaction with shuffler task noted by Peter Zijlstra. ]
Tested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Once removed, an rcu_torture element can be deferred-freed by a chain
of call_rcu() invocations, with each callback invoking another round of
call_rcu() until either a fixed number of call_rcu() invocations have
been chained or until the test ends. This means that if the test ends,
some of the rcu_torture elements will be "stranded" partway through the
deferred-free process, which results in false-positive warnings from
rcu_torture_writer() due to lack of forward progress should the test
end just at the end of a stutter interval.
This commit therefore suppresses rcu_torture_writer()'s forward-progress
checks when the test ends in order to avoid these false-positive reports..
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
In !PREEMPT kernels, cond_resched() is a no-op. In NO_HZ_FULL kernels,
in-kernel execution (such as that of rcutorture's kthreads) might extend
indefinitely without the scheduler gaining the aid of a scheduling-clock
interrupt. This combination can make the interaction of an rcutorture
forward-progress test and a CPU-hotplug stop_machine operation make less
forward progress than one might like. Additionally, Sebastian Siewior
notes that NO_HZ_FULL kernels have a scheduler check upon return to
userspace execution, which suggests that in-kernel emulation of tight
userspace loops containing system calls doing call_rcu() might also need
explicit checks in the PREEMPT && NO_HZ_FULL case.
This commit therefore introduces a rcu_torture_fwd_prog_cond_resched()
function that explicitly invokes schedule() in such kernels whenever
need_resched() returns true, while retaining use of cond_resched()
for kernels that are either !PREEMPT or !NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
After the end of each stutter pause interval, the rcu_torture_writer()
kthread checks to be sure that all prior callbacks have completed so
that all the test structures have been freed. This works fine except
for tasks RCU, in which grace periods can take one good long time.
This commit therefore exempts tasks RCU from this check.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, the inter-stutter interval is the same as the stutter duration,
that is, whatever number of jiffies is passed into torture_stutter_init().
This has worked well for quite some time, but the addition of
forward-progress testing to rcutorture can delay processes for several
seconds, which can triple the time that they are stuttered.
This commit therefore adds a second argument to torture_stutter_init()
that specifies the inter-stutter interval. While locktorture preserves
the current behavior, rcutorture uses the RCU CPU stall warning interval
to provide a wider inter-stutter interval.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The stutter_wait() function is supposed to return true if it actually
waits and false otherwise, but it instead unconditionally returns false.
Which hides a bug in rcu_torture_writer() that fails to account for
the fact that one of the rcu_tortures[] array elements will normally be
referenced by rcu_torture_current, and thus not be on the freelist.
This commit therefore corrects the stutter_wait() return value and adds a
check for rcu_torture_current to rcu_torture_writer()'s check that things
get freed after everything goes quiescent. In addition, this commit
causes torture_stutter() to give a bit more than one second (instead of
only one jiffy) warning of the end of the stutter interval. Finally,
this commit disables long-delay readers and aggressive update-side
forward-progress checks while forward-progress testing is in flight.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_torture_fwd_prog_cbfree() function frees callbacks used during
rcutorture's call_rcu() forward-progress test, but does so in a tight
loop. This could cause problems given a very long list of callbacks to be
freed, and actual testing produces lists with as many as 25M callbacks.
This commit therefore adds a cond_resched() to this loop. While in
the area, this commit also rearranges the lock releases to look a bit
more sane.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
With this patch rcu_sync has a single state variable and the transition rules
become really simple:
GP_IDLE - owned by the first rcu_sync_enter() which moves it to
GP_ENTER - owned by rcu-callback which moves it to
GP_PASSED - owned by the last rcu_sync_exit() which moves it to
GP_EXIT - and this is the only "nontrivial" state.
rcu-callback moves it back to GP_IDLE unless another enter()
comes before a GP pass.
If rcu-callback is invoked before the next rcu_sync_exit() it
must see gp_count incremented by that enter() and set GP_PASSED.
Otherwise, if the next rcu_sync_exit() wins the race, it will
move it to
GP_REPLAY - owned by rcu-callback which moves it to GP_EXIT
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[ paulmck: While here, apply READ_ONCE() and WRITE_ONCE() to ->gp_state. ]
[ paulmck: Tweaks to make htmldocs happy. (Reported by kbuild test robot.) ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Now that the RCU flavors have been consolidated, rcu_sync_type makes no
sense because none of internal update functions aside from .held() depend
on gp_type. This commit therefore removes this field and consolidates
the relevant code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[ paulmck: Added RCU and RCU-bh checks to rcu_sync_is_idle(). ]
[ paulmck: And applied subsequent feedback from Oleg Nesterov. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because __call_srcu() is not used outside kernel/rcu/srcutree.c,
this commit makes it static.
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Adding DEFINE_SRCU() or DEFINE_STATIC_SRCU() to a loadable module requires
that the size of the reserved region be increased, which is not something
we want to be doing all that often. One approach would be to require
that loadable modules define an srcu_struct and invoke init_srcu_struct()
from their module_init function and cleanup_srcu_struct() from their
module_exit function. However, this is more than a bit user unfriendly.
This commit therefore creates an ___srcu_struct_ptrs linker section,
and pointers to srcu_struct structures created by DEFINE_SRCU() and
DEFINE_STATIC_SRCU() within a module are placed into that module's
___srcu_struct_ptrs section. The required init_srcu_struct() and
cleanup_srcu_struct() functions are then automatically invoked as needed
when that module is loaded and unloaded, thus allowing modules to continue
to use DEFINE_SRCU() and DEFINE_STATIC_SRCU() while avoiding the need
to increase the size of the reserved region.
Many of the algorithms and some of the code was cheerfully cherry-picked
from other code making use of linker sections, perhaps most notably from
tracepoints. All bugs are nevertheless the sole property of the author.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
[ paulmck: Use __section() and use "default" in srcu_module_notify()'s
"switch" statement as suggested by Joel Fernandes. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Currently, if a CPU has more than 10,000 callbacks pending, it will
increase rdp->blimit to LONG_MAX. If you are lucky, LONG_MAX is only
about two billion, but this is still a bit too many callbacks to invoke
back-to-back while otherwise ignoring the world.
This commit therefore sets a maximum limit of DEFAULT_MAX_RCU_BLIMIT,
which is set to 10,000, for rdp->blimit.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
On systems whose rcu_node tree has only one node, the
rcu_check_gp_start_stall() function's values of rnp and rnp_root will
be identical. In this case, it clearly does not make sense to release
both rnp->lock and rnp_root->lock, but that is exactly what this function
does in the last early exit. This commit therefore unlocks only rnp->lock
when rnp and rnp_root are equal.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The dump_blkd_tasks() function dumps at most 10 blocked tasks, ignoring
the value of the ncheck parameter. This commit therefore substitutes
the value of ncheck for the hard-coded value of 10. Because all callers
currently pass 10 as the number, this patch does not change behavior,
but it is clearly an accident waiting to happen.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because rdp is initialized but never used in synchronize_rcu_expedited(),
this commit removes it.
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_data structure's ->deferred_qs field is used to indicate that the
current CPU is blocking an expedited grace period (perhaps a future one).
Given that it is used only for expedited grace periods, its current name
is misleading, so this commit renames it to ->exp_deferred_qs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
It would be good to combine the dynticks and dynticks_nesting counters
in order to simplify the code. Unfortunately, there are concerns
about usermode upcalls appearing to RCU as half of an interrupt, as
Byungchul learned [1]. The "half" in "half interrupt" is due to an
unpaired rcu_irq_enter(): Normally, each rcu_irq_enter() has a later
call to rcu_irq_exit().
Out of an abundance of caution, Paul added warnings [2] in the RCU
code which if not fired by 2021 will be interpreted as meaning that
this half-interrupt scenario cannot happen any more, thus permitting
simplification of this code.
In the meantime, this commit makes the following changes:
(1) Combining these two counters requires that rcu_rrupt_from_idle()
is invoked only from hard-interrupt contexts as discussed here [3].
This commit therefore adds the required lockdep_assert_in_irq()
to check this constraint.
(2) Furthermore, rcu_rrupt_from_idle() is not explicit about how it
is using the counters which can lead to weird future bugs. This
commit therefore adds comments indicating the meaning and use of
each counter.
(3) Lastly, this commit checks for counter underflows as another check
that half interrupts don't occur. (Previously, the function would
simply return true upon underflow.)
All these checks checks are NOOPs if PROVE_LOCKING (and thus PROVE_RCU)
are disabled.
[1] https://lore.kernel.org/patchwork/patch/952349/
[2] Commit e11ec65cc8 ("rcu: Add warning to detect half-interrupts")
[3] https://lore.kernel.org/lkml/20190312150514.GB249405@google.com/
Cc: byungchul.park@lge.com
Cc: kernel-team@android.com
Cc: rcu@vger.kernel.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The sync_sched_exp_online_cleanup() is invoked at online time to handle
the case where the start of an expedited grace period ran concurrently
with a CPU being taken offline and then immediately being placed online.
It checks to see if RCU needs an expedited quiescent state from the
incoming CPU, sending it an IPI if so. However, it is quite possible
that sync_sched_exp_online_cleanup() is running on that CPU, in which
case it is considerably less overhead to simply request the quiescent
state locally instead of simulating a self-IPI.
This commit therefore places the last few lines of rcu_exp_handler()
into a new rcu_exp_need_qs() function, which is invoked both by
rcu_exp_handler() and by sync_sched_exp_online_cleanup() in the self-IPI
case.
This also reduces the rcu_exp_handler() function's state space by
removing the direct call that this smp_call_function_single() uses to
emulate the requested self-IPI. This in turn will allow tighter error
checking in rcu_is_cpu_rrupt_from_idle().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Although sync_rcu_exp_select_node_cpus() treats the current CPU as being
in a quiescent state, it might well migrate to some other CPU before
reaching the smp_call_function_single(), which could then result in an
unnecessary simulated self-IPI. This commit therefore instead simply
refuses to invoke smp_call_function_single() on the current CPU, which
causes the later rcu_report_exp_cpu_mult() to report this CPU's quiescent
state with less overhead.
This also reduces the rcu_exp_handler() function's state space by removing
the direct call that this smp_call_function_single() uses to emulate the
requested self-IPI.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Use get_cpu() instead of preempt_disable() per Joel Fernandes. ]
This commit saves a few lines of code by inlining invoke_rcu_callbacks()
into its sole remaining caller.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
When rcu_read_unlock_special() is invoked with interrupts disabled, is
either not in an interrupt handler or is not using RCU_SOFTIRQ, is not
the first RCU read-side critical section in the chain, and either there
is an expedited grace period in flight or this is a NO_HZ_FULL kernel,
the end of the grace period can be unduly delayed. The reason for this
is that it is not safe to do wakeups in this situation.
This commit fixes this problem by using the irq_work subsystem to
force a later interrupt handler in a clean environment. Because
set_tsk_need_resched(current) and set_preempt_need_resched() are
invoked prior to this, the scheduler will force a context switch
upon return from this interrupt (though perhaps at the end of any
interrupted preempt-disable or BH-disable region of code), which will
invoke rcu_note_context_switch() (again in a clean environment), which
will in turn give RCU the chance to report the deferred quiescent state.
Of course, by then this task might be within another RCU read-side
critical section. But that will be detected at that time and reporting
will be further deferred to the outermost rcu_read_unlock(). See
rcu_preempt_need_deferred_qs() and rcu_preempt_deferred_qs() for more
details on the checking.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
When running in an interrupt handler, raise_softirq() and
raise_softirq_irqoff() have extremely low overhead: They simply set a
bit in a per-CPU mask, which is checked upon exit from that interrupt
handler. Therefore, if rcu_read_unlock_special() is invoked within an
interrupt handler and RCU_SOFTIRQ is in use, this commit make use of
raise_softirq_irqoff() even if there is no expedited grace period in
flight and even if this is not a nohz_full CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, rcu_read_unlock_special() will do wakeups whenever it is safe
to do so. However, wakeups are expensive, and they are only really
needed when the just-ended RCU read-side critical section is blocking
an expedited grace period (in which case speed is of the essence)
or on a nohz_full CPU (where it might be a good long time before an
interrupt arrives). This commit therefore checks for these conditions,
and does the expensive wakeups only if doing so would be useful.
Note it can be rather expensive to determine whether or not the current
task (as opposed to the current CPU) is blocking the current expedited
grace period. Doing so requires traversing the ->blkd_tasks list, which
can be quite long. This commit therefore cheats: If the current task
is on a given ->blkd_tasks list, and some task on that list is blocking
the current expedited grace period, the code assumes that the current
task is blocking that expedited grace period.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
When RCU core processing is offloaded from RCU_SOFTIRQ to the rcuc
kthreads, a full and unconditional wakeup is required to initiate RCU
core processing. In contrast, when RCU core processing is carried
out by RCU_SOFTIRQ, a raise_softirq() suffices. Of course, there are
situations where raise_softirq() does a full wakeup, but these do not
occur with normal usage of rcu_read_unlock().
The reason that full wakeups can be problematic is that the scheduler
sometimes invokes rcu_read_unlock() with its pi or rq locks held,
which can of course result in deadlock in CONFIG_PREEMPT=y kernels when
rcu_read_unlock() invokes the scheduler. Scheduler invocations can happen
in the following situations: (1) The just-ended reader has been subjected
to RCU priority boosting, in which case rcu_read_unlock() must deboost,
(2) Interrupts were disabled across the call to rcu_read_unlock(), so
the quiescent state must be deferred, requiring a wakeup of the rcuc
kthread corresponding to the current CPU.
Now, the scheduler may hold one of its locks across rcu_read_unlock()
only if preemption has been disabled across the entire RCU read-side
critical section, which in the days prior to RCU flavor consolidation
meant that rcu_read_unlock() never needed to do wakeups. However, this
is no longer the case for any but the first rcu_read_unlock() following a
condition (e.g., preempted RCU reader) requiring special rcu_read_unlock()
attention. For example, an RCU read-side critical section might be
preempted, but preemption might be disabled across the rcu_read_unlock().
The rcu_read_unlock() must defer the quiescent state, and therefore
leaves the task queued on its leaf rcu_node structure. If a scheduler
interrupt occurs, the scheduler might well invoke rcu_read_unlock() with
one of its locks held. However, the preempted task is still queued, so
rcu_read_unlock() will attempt to defer the quiescent state once more.
When RCU core processing is carried out by RCU_SOFTIRQ, this works just
fine: The raise_softirq() function simply sets a bit in a per-CPU mask
and the RCU core processing will be undertaken upon return from interrupt.
Not so when RCU core processing is carried out by the rcuc kthread: In this
case, the required wakeup can result in deadlock.
The initial solution to this problem was to use set_tsk_need_resched() and
set_preempt_need_resched() to force a future context switch, which allows
rcu_preempt_note_context_switch() to report the deferred quiescent state
to RCU's core processing. Unfortunately for expedited grace periods,
there can be a significant delay between the call for a context switch
and the actual context switch.
This commit therefore introduces a ->deferred_qs flag to the task_struct
structure's rcu_special structure. This flag is initially false, and
is set to true by the first call to rcu_read_unlock() requiring special
attention, then finally reset back to false when the quiescent state is
finally reported. Then rcu_read_unlock() attempts full wakeups only when
->deferred_qs is false, that is, on the first rcu_read_unlock() requiring
special attention. Note that a chain of RCU readers linked by some other
sort of reader may find that a later rcu_read_unlock() is once again able
to do a full wakeup, courtesy of an intervening preemption:
rcu_read_lock();
/* preempted */
local_irq_disable();
rcu_read_unlock(); /* Can do full wakeup, sets ->deferred_qs. */
rcu_read_lock();
local_irq_enable();
preempt_disable()
rcu_read_unlock(); /* Cannot do full wakeup, ->deferred_qs set. */
rcu_read_lock();
preempt_enable();
/* preempted, >deferred_qs reset. */
local_irq_disable();
rcu_read_unlock(); /* Can again do full wakeup, sets ->deferred_qs. */
Such linked RCU readers do not yet seem to appear in the Linux kernel, and
it is probably best if they don't. However, RCU needs to handle them, and
some variations on this theme could make even raise_softirq() unsafe due to
the possibility of its doing a full wakeup. This commit therefore also
avoids invoking raise_softirq() when the ->deferred_qs set flag is set.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Some workloads need to change kthread priority for RCU core processing
without affecting other softirq work. This commit therefore introduces
the rcutree.use_softirq kernel boot parameter, which moves the RCU core
work from softirq to a per-CPU SCHED_OTHER kthread named rcuc. Use of
SCHED_OTHER approach avoids the scalability problems that appeared
with the earlier attempt to move RCU core processing to from softirq
to kthreads. That said, kernels built with RCU_BOOST=y will run the
rcuc kthreads at the RCU-boosting priority.
Note that rcutree.use_softirq=0 must be specified to move RCU core
processing to the rcuc kthreads: rcutree.use_softirq=1 is the default.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ paulmck: Adjust for invoke_rcu_callbacks() only ever being invoked
from RCU core processing, in contrast to softirq->rcuc transition
in old mainline RCU priority boosting. ]
[ paulmck: Avoid wakeups when scheduler might have invoked rcu_read_unlock()
while holding rq or pi locks, also possibly fixing a pre-existing latent
bug involving raise_softirq()-induced wakeups. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Removing of non-DYNAMIC_FTRACE from 32bit x86
- Removing of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on config
options
And other minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXNxMZxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq4PAP44kP6VbwL8CHyI2A3xuJ6Hwxd+2Z2r
ip66RtzyJ+2iCgEA2QCuWUlEt2bLpF9a8IQ4N9tWenSeW2i7gunPb+tioQw=
=RVQo
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major changes in this tracing update includes:
- Removal of non-DYNAMIC_FTRACE from 32bit x86
- Removal of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on
config options
And other minor fixes and clean ups"
* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
x86: Hide the int3_emulate_call/jmp functions from UML
livepatch: Remove klp_check_compiler_support()
ftrace/x86: Remove mcount support
ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
tracing: Simplify "if" macro code
tracing: Fix documentation about disabling options using trace_options
tracing: Replace kzalloc with kcalloc
tracing: Fix partial reading of trace event's id file
tracing: Allow RCU to run between postponed startup tests
tracing: Fix white space issues in parse_pred() function
tracing: Eliminate const char[] auto variables
ring-buffer: Fix mispelling of Calculate
tracing: probeevent: Fix to make the type of $comm string
tracing: probeevent: Do not accumulate on ret variable
tracing: uprobes: Re-enable $comm support for uprobe events
ftrace/x86_64: Emulate call function while updating in breakpoint handler
x86_64: Allow breakpoints to emulate call instructions
x86_64: Add gap to int3 to allow for call emulation
tracing: kdb: Allow ftdump to skip all but the last few entries
tracing: Add trace_total_entries() / trace_total_entries_cpu()
...
-----BEGIN PGP SIGNATURE-----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=WZfC
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
When CONFIG_RCU_TRACE is not set, all these tracepoints are defined as
do-nothing macro.
We'd better make those inline functions that take proper arguments.
As RCU_TRACE() is defined as do-nothing marco as well when
CONFIG_RCU_TRACE is not set, so we can clean it up.
Link: http://lkml.kernel.org/r/1553602391-11926-4-git-send-email-laoar.shao@gmail.com
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the specified rcuperf.perf_type is not in the rcu_perf_init()
function's perf_ops[] array, rcuperf prints some console messages and
then invokes rcu_perf_cleanup() to set state so that a future torture
test can run. However, rcu_perf_cleanup() also attempts to end the
test that didn't actually start, and in doing so relies on the value
of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case and
inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding
relying on an irrelevant cur_ops value.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
If the specified rcutorture.torture_type is not in the rcu_torture_init()
function's torture_ops[] array, rcutorture prints some console messages
and then invokes rcu_torture_cleanup() to set state so that a future
torture test can run. However, rcu_torture_cleanup() also attempts to
end the test that didn't actually start, and in doing so relies on the
value of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case
and inserts a check near the beginning of rcu_torture_cleanup(),
thus avoiding relying on an irrelevant cur_ops value.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcutorture_oom_notify() function has a misplaced close parenthesis
that results in increasingly long delays in rcu_fwd_progress_check()'s
checking for various RCU forward-progress problems. This commit therefore
puts the parenthesis in the right place.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Back when there was a separate RCU-bh flavor, the ->ext_irq_conflict
field was used to prevent executing local_bh_enable() while interrupts
were disabled. However, there is no longer an RCU-bh flavor, so this
commit removes the no-longer-needed ->ext_irq_conflict field.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The code actually rarely uses more than one type of RCU read-side
protection, as is actually desired given that we need some reasonable
probability of preempting RCU read-side critical sections, which cannot
happen with multiple types of protection. This comment therefore adjusts
the comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The Documentation/RCU/stallwarn.txt file says that stall warnings
print "D" if dyntick-idle processing is enabled, but the code in
print_cpu_stall_fast_no_hz() prints "." instead. This commit therefore
reverses the sense of the test to make the code match the documentation.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit further consolidates stall-warning functionality by moving
forward-progress checkers into kernel/rcu/tree_stall.h, updating a
comment or two while in the area. More specifically, this commit moves
show_rcu_gp_kthreads(), rcu_check_gp_start_stall(), rcu_fwd_progress_check(),
sysrq_rcu, sysrq_show_rcu(), sysrq_rcudump_op, and rcu_sysrq_init() from
kernel/rcu/tree.c to kernel/rcu/tree_stall.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_iw_handler() function's sole purpose in life is to indicate
whether a stalled CPU had interrupts disabled, so it belongs in
kernel/rcu/tree_stall.h. This commit therefore makes that move,
clarifying its header comment while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit does only code movement, removal of now-unneeded forward
declarations, and addition of comments. It organizes the functions
that implement RCU CPU stall warnings for normal grace periods into
three categories:
1. Control of RCU CPU stall warnings, including computing timeouts.
2. Interaction of stall warnings with grace periods.
3. Actual printing of the RCU CPU stall-warning messages.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit further consolidates the stall-warning code by moving
print_cpu_stall_info() and its helper functions along with
zero_cpu_stall_ticks() to kernel/rcu/tree_stall.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The print_cpu_stall_info_begin() and print_cpu_stall_info_end() print a
single character each onto the console, and are a holdover from a time
when RCU CPU stall warning messages could be abbreviated using a long-gone
Kconfig option. This commit therefore adds these single characters to
already-printed strings in the calling functions, and then eliminates
both print_cpu_stall_info_begin() and print_cpu_stall_info_end().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because expedited CPU stall warnings are contained within the
kernel/rcu/tree_exp.h file, rcu_print_task_exp_stall() should live
there too. This commit carries out the required code motion.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_print_detail_task_stall(), rcu_print_task_stall_begin(), and
rcu_print_task_stall_end() functions were defined to allow long-gone
Kconfig options to provide an abbreviated RCU CPU stall warning printout.
This commit saves a few lines of code by inlining them into their sole
callers.
While in the area, a useless call of rcu_print_detail_task_stall_rnp()
on the root rcu_node structure was eliminated. If there is only one
rcu_node structure, its tasks get printed twice, but if there are more,
the root rcu_node structure is guaranteed to have an empty list of blocked
tasks, hence the uselessness. (Long ago, root rcu_node structures with
non-empty ->blkd_tasks lists could happen, but no longer.)
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit completes the process of consolidating the code for RCU CPU
stall warnings for normal grace periods by moving the remaining such
code from kernel/rcu/tree.c to kernel/rcu/tree_stall.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Ingo Molnar