Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Simple filesystems always pass inode->i_sb_bdev as the block device
argument, and never need a end_io handler. Let's simply things for
them and for my grepping activity by dropping these arguments. The
only thing not falling into that scheme is ext4, which passes and
end_io handler without needing special flags (yet), but given how
messy the direct I/O code there is use of __blockdev_direct_IO
in one instead of two out of three cases isn't going to make a large
difference anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand. This means filesystem-specific locks to prevent
new dio referenes from appearing can be held. This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Add a new helper to write out the inode using the writeback code,
that is including the correct dirty bit and list manipulation. A few
of filesystems already opencode this, and a lot of others should be
using it instead of using write_inode_now which also writes out the
data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
'excpet' should be 'except'.
'ext3_get_branch' should be 'ext2_get_branch'.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.
As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.
Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.
Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Despite its name it's now a generic implementation of ->setattr, but
rather a helper to copy attributes from a struct iattr to the inode.
Rename it to setattr_copy to reflect this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.
While we're at it also remove several unused arguments to block_write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For filesystem that implement directories in pagecache we call
block_write_begin with an already allocated page for this code, while the
normal regular file write path uses the default block_write_begin behaviour.
Get rid of the __foofs_write_begin helper and opencode the normal write_begin
call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for
the directory code. The added benefit is that foofs_prepare_chunk has
a much saner calling convention.
Note that the interruptible flag passed into block_write_begin is always
ignored if we already pass in a page (see next patch for details), and
we never were doing truncations of exessive blocks for this case either so we
can switch directly to block_write_begin_newtrunc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the call to vmtruncate to get rid of accessive blocks to the only
remaining caller and rename the non-truncating version to nobh_write_begin.
Get rid of the superflous file argument to it while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway. Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
mtime and ctime should be changed only if the file size has actually
changed. Patches changing ext2 and tmpfs from vmtruncate to new truncate
sequence has caused regressions where they always update timestamps.
There is some strange cases in POSIX where truncate(2) must not update
times unless the size has acutally changed, see 6e656be89.
This area is all still rather buggy in different ways in a lot of
filesystems and needs a cleanup and audit (ideally the vfs will provide
a simple attribute or call to direct all filesystems exactly which
attributes to change). But coming up with the best solution will take a
while and is not appropriate for rc anyway.
So fix recent regression for now.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I also have commented a possible bug in existing ext2 code, marked with XXX.
Cc: linux-ext4@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.
If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Add a spinlock that protects against concurrent modifications of
s_mount_state, s_blocks_last, s_overhead_last and the content of the
superblock's buffer pointed to by sbi->s_es. The spinlock is now used in
ext2_xattr_update_super_block() which was setting the
EXT2_FEATURE_COMPAT_EXT_ATTR flag on the superblock without protection
before. Likewise the spinlock is used in ext2_show_options() to have a
consistent view of the mount options.
This is a preparation patch for removing the BKL from ext2 in the next
patch.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.
I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.
Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?
Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
kill ext2_sync_file() (along with ext2/fsync.c), get rid of
ext2_update_inode() - it's an alias of ext2_write_inode().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If two writers allocating blocks to file race with each other (e.g.
because writepages races with ordinary write or two writepages race with
each other), ext2_getblock() can be called on the same inode in parallel.
Before we are going to allocate new blocks, we have to recheck the block
chain we have obtained so far without holding truncate_mutex. Otherwise
we could overwrite the indirect block pointer set by the other writer
leading to data loss.
The below test program by Ying is able to reproduce the data loss with ext2
on in BRD in a few minutes if the machine is under memory pressure:
long kMemSize = 50 << 20;
int kPageSize = 4096;
int main(int argc, char **argv) {
int status;
int count = 0;
int i;
char *fname = "/mnt/test.mmap";
char *mem;
unlink(fname);
int fd = open(fname, O_CREAT | O_EXCL | O_RDWR, 0600);
status = ftruncate(fd, kMemSize);
mem = mmap(0, kMemSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
// Fill the memory with 1s.
memset(mem, 1, kMemSize);
sleep(2);
for (i = 0; i < kMemSize; i++) {
int byte_good = mem[i] != 0;
if (!byte_good && ((i % kPageSize) == 0)) {
//printf("%d ", i / kPageSize);
count++;
}
}
munmap(mem, kMemSize);
close(fd);
unlink(fname);
if (count > 0) {
printf("Running %d bad page\n", count);
return 1;
}
return 0;
}
Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no argument named @chain in ext2_splice_branch, remove references
to it.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Any block based fs (this patch includes ext3) just has to declare its own
fiemap() function and then call this generic function with its own
get_block_t. This works well for block based filesystems that will map
multiple contiguous blocks at one time, but will work for filesystems that
only map one block at a time, you will just end up with an "extent" for each
block. One gotcha is this will not play nicely where there is hole+data
after the EOF. This function will assume its hit the end of the data as soon
as it hits a hole after the EOF, so if there is any data past that it will
not pick that up. AFAIK no block based fs does this anyway, but its in the
comments of the function anyway just in case.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.
I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment. Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.
So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate. This can
reduce read IO and improve system throughput.
I wrote a benchmark program and got result number with this program.
This benchmark do:
1: mount and open a test file.
2: create a 512MB file.
3: close a file and umount.
4: mount and again open a test file.
5: pwrite randomly 300000 times on a test file. offset is aligned
by IO size(1024bytes).
6: measure time of preading randomly 100000 times on a test file.
The result was:
2.6.26
330 sec
2.6.26-patched
226 sec
Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB
On ext3/4, a file is written through buffer/block. So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment. This test result
showed this.
The benchmark program is as follows:
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>
#define LEN 1024
#define LOOP 1024*512 /* 512MB */
main(void)
{
unsigned long i, offset, filesize;
int fd;
char buf[LEN];
time_t t1, t2;
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
memset(buf, 0, LEN);
fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
for (i = 0; i < LOOP; i++)
write(fd, buf, LEN);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
fd = open("/root/test1/testfile", O_RDWR);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
filesize = LEN * LOOP;
for (i = 0; i < 300000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pwrite(fd, buf, LEN, offset);
}
printf("start test\n");
time(&t1);
for (i = 0; i < 100000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pread(fd, buf, LEN, offset);
}
time(&t2);
printf("%ld sec\n", t2-t1);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
}
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use ext2_fsblk_t type for filesystem-wide blocks number
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use ext2_group_first_block_no() and assign the return values to
ext2_fsblk_t variables.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert XIP to support non-struct page backed memory, using VM_MIXEDMAP for
the user mappings.
This requires the get_xip_page API to be changed to an address based one.
Improve the API layering a little bit too, while we're here.
This is required in order to support XIP filesystems on memory that isn't
backed with struct page (but memory with struct page is still supported too).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stop the EXT2 filesystem from using iget() and read_inode(). Replace
ext2_read_inode() with ext2_iget(), and call that instead of iget().
ext2_iget() then uses iget_locked() directly and returns a proper error code
instead of an inode in the event of an error.
ext2_fill_super() returns any error incurred when getting the root inode
instead of EINVAL.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The argument chain for ext[234]_find_goal() is not used. This patch removes
it and fixes comment as well.
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No BKL used anywhere, so don't mention it.
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ext[234]_get_group_desc never tests the bh argument, and only sets it if it
is passed in; it is perfectly happy with a NULL bh argument. But, many
callers send one in and never use it. May as well call with NULL like
other callers who don't use the bh.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement nobh in new aops. This is a bit tricky. FWIW, nobh_truncate is
now implemented in a way that does not create blocks in sparse regions,
which is a silly thing for it to have been doing (isn't it?)
ext2 survives fsx and fsstress. jfs is converted as well... ext3
should be easy to do (but not done yet).
[akpm@linux-foundation.org: coding-style fixes]
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into
ext2-specific i_flags. Hence, when someone sets these flags via a different
interface than ioctl, they are stored correctly.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=5079
signed long ranges from -2.147.483.648 to 2.147.483.647 on x86 32bit
10000011110110100100111110111101 .. -2,082,844,739
10000011110110100100111110111101 .. 2,212,122,557 <- this currently gets
stored on the disk but when converting it to a 64bit signed long value it loses
its sign and becomes positive.
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: <linux-ext4@vger.kernel.org>
Andreas says:
This patch is now treating timestamps with the high bit set as negative
times (before Jan 1, 1970). This means we lose 1/2 of the possible range
of timestamps (lopping off 68 years before unix timestamp overflow -
now only 30 years away :-) to handle the extremely rare case of setting
timestamps into the distant past.
If we are only interested in fixing the underflow case, we could just
limit the values to 0 instead of storing negative values. At worst this
will skew the timestamp by a few hours for timezones in the far east
(files would still show Jan 1, 1970 in "ls -l" output).
That said, it seems 32-bit systems (mine at least) allow files to be set
into the past (01/01/1907 works fine) so it seems this patch is bringing
the x86_64 behaviour into sync with other kernels.
On the plus side, we have a patch that is ready to add nanosecond timestamps
to ext3 and as an added bonus adds 2 high bits to the on-disk timestamp so
this extends the maximum date to 2242.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Miklos Szeredi