Any changes interesting to tasks waiting in io_cqring_wait() are
commited with io_cqring_ev_posted(). However, io_ring_drop_ctx_refs()
also tries to do that but with no reason, that means spurious wakeups
every io_free_req() and io_uring_enter().
Just use percpu_ref_put() instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge misc fixes from Andrew Morton:
"The usual shower of hotfixes.
Chris's memcg patches aren't actually fixes - they're mature but a few
niggling review issues were late to arrive.
The ocfs2 fixes are quite old - those took some time to get reviewer
attention.
Subsystems affected by this patch series: ocfs2, hotfixes, mm/memcg,
mm/slab-generic"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, sl[aou]b: guarantee natural alignment for kmalloc(power-of-two)
mm, sl[ou]b: improve memory accounting
mm, memcg: make scan aggression always exclude protection
mm, memcg: make memory.emin the baseline for utilisation determination
mm, memcg: proportional memory.{low,min} reclaim
mm/vmpressure.c: fix a signedness bug in vmpressure_register_event()
mm/page_alloc.c: fix a crash in free_pages_prepare()
mm/z3fold.c: claim page in the beginning of free
kernel/sysctl.c: do not override max_threads provided by userspace
memcg: only record foreign writebacks with dirty pages when memcg is not disabled
mm: fix -Wmissing-prototypes warnings
writeback: fix use-after-free in finish_writeback_work()
mm/memremap: drop unused SECTION_SIZE and SECTION_MASK
panic: ensure preemption is disabled during panic()
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc()
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock()
fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()
ocfs2: clear zero in unaligned direct IO
In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283
to check whether inode_alloc is NULL:
if (inode_alloc)
When inode_alloc is NULL, it is used on line 287:
ocfs2_inode_lock(inode_alloc, &bh, 0);
ocfs2_inode_lock_full_nested(inode, ...)
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
Thus, a possible null-pointer dereference may occur.
To fix this bug, inode_alloc is checked on line 286.
This bug is found by a static analysis tool STCheck written by us.
Link: http://lkml.kernel.org/r/20190726033717.32359-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_write_end_nolock(), there are an if statement on lines 1976,
2047 and 2058, to check whether handle is NULL:
if (handle)
When handle is NULL, it is used on line 2045:
ocfs2_update_inode_fsync_trans(handle, inode, 1);
oi->i_sync_tid = handle->h_transaction->t_tid;
Thus, a possible null-pointer dereference may occur.
To fix this bug, handle is checked before calling
ocfs2_update_inode_fsync_trans().
This bug is found by a static analysis tool STCheck written by us.
Link: http://lkml.kernel.org/r/20190726033705.32307-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to
check whether loc->xl_entry is NULL:
if (loc->xl_entry)
When loc->xl_entry is NULL, it is used on line 2158:
ocfs2_xa_add_entry(loc, name_hash);
loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash);
loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);
and line 2164:
ocfs2_xa_add_namevalue(loc, xi);
loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len);
loc->xl_entry->xe_name_len = xi->xi_name_len;
Thus, possible null-pointer dereferences may occur.
To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry()
abnormally returns with -EINVAL.
These bugs are found by a static analysis tool STCheck written by us.
[akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()]
Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unused portion of a part-written fs-block-sized block is not set to zero
in unaligned append direct write.This can lead to serious data
inconsistencies.
Ocfs2 manage disk with cluster size(for example, 1M), part-written in
one cluster will change the cluster state from UN-WRITTEN to WRITTEN,
VFS(function dio_zero_block) doesn't do the cleaning because bh's state
is not set to NEW in function ocfs2_dio_wr_get_block when we write a
WRITTEN cluster. For example, the cluster size is 1M, file size is 8k
and we direct write from 14k to 15k, then 12k~14k and 15k~16k will
contain dirty data.
We have to deal with two cases:
1.The starting position of direct write is outside the file.
2.The starting position of direct write is located in the file.
We need set bh's state to NEW in the first case. In the second case, we
need mapped twice because bh's state of area out file should be set to
NEW while area in file not.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/5292e287-8f1a-fd4a-1a14-661e555e0bed@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 9f79b78ef7 ("Convert filldir[64]() from __put_user() to
unsafe_put_user()") I made filldir() use unsafe_put_user(), which
improves code generation on x86 enormously.
But because we didn't have a "unsafe_copy_to_user()", the dirent name
copy was also done by hand with unsafe_put_user() in a loop, and it
turns out that a lot of other architectures didn't like that, because
unlike x86, they have various alignment issues.
Most non-x86 architectures trap and fix it up, and some (like xtensa)
will just fail unaligned put_user() accesses unconditionally. Which
makes that "copy using put_user() in a loop" not work for them at all.
I could make that code do explicit alignment etc, but the architectures
that don't like unaligned accesses also don't really use the fancy
"user_access_begin/end()" model, so they might just use the regular old
__copy_to_user() interface.
So this commit takes that looping implementation, turns it into the x86
version of "unsafe_copy_to_user()", and makes other architectures
implement the unsafe copy version as __copy_to_user() (the same way they
do for the other unsafe_xyz() accessor functions).
Note that it only does this for the copying _to_ user space, and we
still don't have a unsafe version of copy_from_user().
That's partly because we have no current users of it, but also partly
because the copy_from_user() case is slightly different and cannot
efficiently be implemented in terms of a unsafe_get_user() loop (because
gcc can't do asm goto with outputs).
It would be trivial to do this using "rep movsb", which would work
really nicely on newer x86 cores, but really badly on some older ones.
Al Viro is looking at cleaning up all our user copy routines to make
this all a non-issue, but for now we have this simple-but-stupid version
for x86 that works fine for the dirent name copy case because those
names are short strings and we simply don't need anything fancier.
Fixes: 9f79b78ef7 ("Convert filldir[64]() from __put_user() to unsafe_put_user()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-and-tested-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently if the client identifies problems when processing
metadata returned in CREATE response, the open handle is being
leaked. This causes multiple problems like a file missing a lease
break by that client which causes high latencies to other clients
accessing the file. Another side-effect of this is that the file
can't be deleted.
Fix this by closing the file after the client hits an error after
the file was opened and the open descriptor wasn't returned to
the user space. Also convert -ESTALE to -EOPENSTALE to allow
the VFS to revalidate a dentry and retry the open.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After 'Initial git repository build' commit,
'mapping_table_ERRHRD' variable has not been used.
So 'mapping_table_ERRHRD' const variable could be removed
to mute below warning message:
fs/cifs/netmisc.c:120:40: warning: unused variable 'mapping_table_ERRHRD' [-Wunused-const-variable]
static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
^
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that sparse has been fixed, it spotted a couple recent minor
endian errors (and removed one additional sparse warning).
Thanks to Luc Van Oostenryck for his help fixing sparse.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Guarantee zeroed memory buffers for cases where potential memory
leak to disk can occur. In these cases, kmem_alloc is used and
doesn't zero the buffer, opening the possibility of information
leakage to disk.
Use existing infrastucture (xfs_buf_allocate_memory) to obtain
the already zeroed buffer from kernel memory.
This solution avoids the performance issue that would occur if a
wholesale change to replace kmem_alloc with kmem_zalloc was done.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
[darrick: fix bitwise complaint about kmflag_mask]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Removed unused error variable. Instead of using error variable,
returned the value directly as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags arg is always passed as zero, so remove it.
(xfs_buf_get_uncached takes flags to support XBF_NO_IOACCT for
the sb, but that should never be relevant for xfs_get_aghdr_buf)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
To ensure that all blocks touched by the range [offset, offset + count)
are allocated, we need to calculate the block count from the difference
of the range end (rounded up) and the range start (rounded down).
Before this patch, we just round up the byte count, which may lead to
unaligned ranges not being fully allocated:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..7]: 1396264..1396271
1: [8..15]: hole
There should not be a hole there. Instead, the first two blocks should
be fully allocated.
With this patch applied, the result is something like this:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..15]: 11024..11039
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit 4ed2863951 ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.
Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac74f ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases. But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.
Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case. End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.
Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.
This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.
Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.
It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.
Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.
In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: 4ed2863951 ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes: ad55eac74f ("elf: enforce MAP_FIXED on overlaying elf segments")
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space. And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.
I really wanted to do this during the merge window, but didn't have
time. The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.
It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned. But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.
* branch 'readdir':
Make filldir[64]() verify the directory entry filename is valid
Convert filldir[64]() from __put_user() to unsafe_put_user()
This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().
This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.
There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.
There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption. It's really more
"protect user space from bad behavior" as pointed out by Jann. But
since Eric Biederman looked up the POSIX wording, here it is for context:
"From readdir:
The readdir() function shall return a pointer to a structure
representing the directory entry at the current position in the
directory stream specified by the argument dirp, and position the
directory stream at the next entry. It shall return a null pointer
upon reaching the end of the directory stream. The structure dirent
defined in the <dirent.h> header describes a directory entry.
From definitions:
3.129 Directory Entry (or Link)
An object that associates a filename with a file. Several directory
entries can associate names with the same file.
...
3.169 Filename
A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
characters composing the name may be selected from the set of all
character values excluding the slash character and the null byte. The
filenames dot and dot-dot have special meaning. A filename is
sometimes referred to as a 'pathname component'."
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.
We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')
See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.
Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.
Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.
So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface. Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.
This also makes the dirent name copy use unsafe_put_user() with a couple
of macros. We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.
Note that this doesn't bother with the legacy cases. Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=vKVl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Mandate timespec64 for the io_uring timeout ABI (Arnd)
- Set of NVMe changes via Sagi:
- controller removal race fix from Balbir
- quirk additions from Gabriel and Jian-Hong
- nvme-pci power state save fix from Mario
- Add 64bit user commands (for 64bit registers) from Marta
- nvme-rdma/nvme-tcp fixes from Max, Mark and Me
- Minor cleanups and nits from James, Dan and John
- Two s390 dasd fixes (Jan, Stefan)
- Have loop change block size in DIO mode (Martijn)
- paride pg header ifdef guard (Masahiro)
- Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned
devices and suboptimal performance on others (Ming)
* tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits)
block: sed-opal: fix sparse warning: convert __be64 data
block: sed-opal: fix sparse warning: obsolete array init.
block: pg: add header include guard
Revert "s390/dasd: Add discard support for ESE volumes"
s390/dasd: Fix error handling during online processing
io_uring: use __kernel_timespec in timeout ABI
loop: change queue block size to match when using DIO
blk-mq: apply normal plugging for HDD
blk-mq: honor IO scheduler for multiqueue devices
nvme-rdma: fix possible use-after-free in connect timeout
nvme: Move ctrl sqsize to generic space
nvme: Add ctrl attributes for queue_count and sqsize
nvme: allow 64-bit results in passthru commands
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
nvmet-tcp: remove superflous check on request sgl
Added QUIRKs for ADATA XPG SX8200 Pro 512GB
nvme-rdma: Fix max_hw_sectors calculation
nvme: fix an error code in nvme_init_subsystem()
nvme-pci: Save PCI state before putting drive into deepest state
nvme-tcp: fix wrong stop condition in io_work
...
Today, put_compat_statfs64() disallows nearly any field value over
2^32 if f_bsize is only 32 bits, but that makes no sense.
compat_statfs64 is there for the explicit purpose of providing 64-bit
fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits.
As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file
counts even with -D_FILE_OFFSET_BITS=64 set.
In reality, only f_bsize and f_frsize can legitimately overflow
(fields like f_type and f_namelen should never be large), so test
only those fields.
This bug was discussed at length some time ago, and this is the proposal
Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get
dropped amid the discussion of other related changes, but this
part seems obviously correct on its own, so I've picked it up and
sent it, for expediency.
Fixes: 64d2ab32ef ("vfs: fix put_compat_statfs64() does not handle errors")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Coverity caught a case where we could return with a uninitialized value
in ret in process_leaf. This is actually pretty likely because we could
very easily run into a block group item key and have a garbage value in
ret and think there was an errror. Fix this by initializing ret to 0.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: fd708b81d9 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the command:
btrfs balance start -dconvert=single,soft .
on a Raspberry Pi produces the following kernel message:
BTRFS error (device mmcblk0p2): balance: invalid convert data profile single
This fails because we use is_power_of_2(unsigned long) to validate
the new data profile, the constant for 'single' profile uses bit 48,
and there are only 32 bits in a long on ARM.
Fix by open-coding the check using u64 variables.
Tested by completing the original balance command on several Raspberry
Pis.
Fixes: 818255feec ("btrfs: use common helper instead of open coding a bit test")
CC: stable@vger.kernel.org # 4.20+
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read. Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.
The modification of the individual log root items are serialized on the
per-log root root_mutex. This means that any modification to the
per-subvol log root_item is completely protected.
However we update the root item in the log root tree outside of the log
root tree log_mutex. We do this in order to allow multiple subvolumes
to be updated in each log transaction.
This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information. Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.
This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at. Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.
Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree. This way we do not modify the
log_root_tree while we're committing it, fixing the problem.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we have a buffered write that starts at an offset greater than or
equals to the file's size happening concurrently with a full ranged
fiemap, we can end up leaking an extent state structure.
Suppose we have a file with a size of 1Mb, and before the buffered write
and fiemap are performed, it has a single extent state in its io tree
representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set.
The following sequence diagram shows how the memory leak happens if a
fiemap a buffered write, starting at offset 1Mb and with a length of
4Kb, are performed concurrently.
CPU 1 CPU 2
extent_fiemap()
--> it's a full ranged fiemap
range from 0 to LLONG_MAX - 1
(9223372036854775807)
--> locks range in the inode's
io tree
--> after this we have 2 extent
states in the io tree:
--> 1 for range [0, 1Mb[ with
the bits EXTENT_LOCKED and
EXTENT_DELALLOC_BITS set
--> 1 for the range
[1Mb, LLONG_MAX[ with
the EXTENT_LOCKED bit set
--> start buffered write at offset
1Mb with a length of 4Kb
btrfs_file_write_iter()
btrfs_buffered_write()
--> cached_state is NULL
lock_and_cleanup_extent_if_need()
--> returns 0 and does not lock
range because it starts
at current i_size / eof
--> cached_state remains NULL
btrfs_dirty_pages()
btrfs_set_extent_delalloc()
(...)
__set_extent_bit()
--> splits extent state for range
[1Mb, LLONG_MAX[ and now we
have 2 extent states:
--> one for the range
[1Mb, 1Mb + 4Kb[ with
EXTENT_LOCKED set
--> another one for the range
[1Mb + 4Kb, LLONG_MAX[ with
EXTENT_LOCKED set as well
--> sets EXTENT_DELALLOC on the
extent state for the range
[1Mb, 1Mb + 4Kb[
--> caches extent state
[1Mb, 1Mb + 4Kb[ into
@cached_state because it has
the bit EXTENT_LOCKED set
--> btrfs_buffered_write() ends up
with a non-NULL cached_state and
never calls anything to release its
reference on it, resulting in a
memory leak
Fix this by calling free_extent_state() on cached_state if the range was
not locked by lock_and_cleanup_extent_if_need().
The same issue can happen if anything else other than fiemap locks a range
that covers eof and beyond.
This could be triggered, sporadically, by test case generic/561 from the
fstests suite, which makes duperemove run concurrently with fsstress, and
duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set
the leak is reported in dmesg/syslog when removing the btrfs module with
a message like the following:
[77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1
Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak.
CC: stable@vger.kernel.org # 4.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All system calls use struct __kernel_timespec instead of the old struct
timespec, but this one was just added with the old-style ABI. Change it
now to enforce the use of __kernel_timespec, avoiding ABI confusion and
the need for compat handlers on 32-bit architectures.
Any user space caller will have to use __kernel_timespec now, but this
is unambiguous and works for any C library regardless of the time_t
definition. A nicer way to specify the timeout would have been a less
ambiguous 64-bit nanosecond value, but I suppose it's too late now to
change that as this would impact both 32-bit and 64-bit users.
Fixes: 5262f56798 ("io_uring: IORING_OP_TIMEOUT support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a recent cleanup patch. noio (bypass) chain is
handled asynchronously against submit chain, therefore
inplace I/O or pagevec cannot be applied to such pages.
Add detailed comment for this as well.
Fixes: 97e86a858b ("staging: erofs: tidy up decompression frontend")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190922100434.229340-1-gaoxiang25@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
After doing more drop_caches stress test on
our products, I found the mistake introduced by
a very recent cleanup [1].
The current rule is that "erofs_get_meta_page"
should be returned with page locked (although
it's mostly unnecessary for read-only fs after
pages are PG_uptodate), but a fix should be
done for this.
[1] https://lore.kernel.org/r/20190904020912.63925-26-gaoxiang25@huawei.com
Fixes: 618f40ea02 ("erofs: use read_cache_page_gfp for erofs_get_meta_page")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190921184355.149928-1-gaoxiang25@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
In case of error, the function read_mapping_page() returns
ERR_PTR() not NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Fixes: fe7c242357 ("erofs: use read_mapping_page instead of sb_bread")
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20190918083033.47780-1-weiyongjun1@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
-----BEGIN PGP SIGNATURE-----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=2UM7
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A bunch of fixes that accumulated in recent weeks, mostly material for
stable.
Summary:
- fix for regression from 5.3 that prevents to use balance convert
with single profile
- qgroup fixes: rescan race, accounting leak with multiple writers,
potential leak after io failure recovery
- fix for use after free in relocation (reported by KASAN)
- other error handling fixups"
* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
btrfs: Fix a regression which we can't convert to SINGLE profile
btrfs: relocation: fix use-after-free on dead relocation roots
Btrfs: fix race setting up and completing qgroup rescan workers
Btrfs: fix missing error return if writeback for extent buffer never started
btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
Pull more vfs updates from Al Viro:
"A couple of misc patches"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs dynroot: switch to simple_dir_operations
fs/handle.c - fix up kerneldoc
-----BEGIN PGP SIGNATURE-----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=o1/m
-----END PGP SIGNATURE-----
Merge tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"Fixes from the recent SMB3 Test events and Storage Developer
Conference (held the last two weeks).
Here are nine smb3 patches including an important patch for debugging
traces with wireshark, with three patches marked for stable.
Additional fixes from last week to better handle some newly discovered
reparse points, and a fix the create/mkdir path for setting the mode
more atomically (in SMB3 Create security descriptor context), and one
for path name processing are still being tested so are not included
here"
* tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix oplock handling for SMB 2.1+ protocols
smb3: missing ACL related flags
smb3: pass mode bits into create calls
smb3: Add missing reparse tags
CIFS: fix max ea value size
fs/cifs/sess.c: Remove set but not used variable 'capabilities'
fs/cifs/smb2pdu.c: Make SMB2_notify_init static
smb3: fix leak in "open on server" perf counter
smb3: allow decryption keys to be dumped by admin for debugging
Merge active entropy generation updates.
This is admittedly partly "for discussion". We need to have a way
forward for the boot time deadlocks where user space ends up waiting for
more entropy, but no entropy is forthcoming because the system is
entirely idle just waiting for something to happen.
While this was triggered by what is arguably a user space bug with
GDM/gnome-session asking for secure randomness during early boot, when
they didn't even need any such truly secure thing, the issue ends up
being that our "getrandom()" interface is prone to that kind of
confusion, because people don't think very hard about whether they want
to block for sufficient amounts of entropy.
The approach here-in is to decide to not just passively wait for entropy
to happen, but to start actively collecting it if it is missing. This
is not necessarily always possible, but if the architecture has a CPU
cycle counter, there is a fair amount of noise in the exact timings of
reasonably complex loads.
We may end up tweaking the load and the entropy estimates, but this
should be at least a reasonable starting point.
As part of this, we also revert the revert of the ext4 IO pattern
improvement that ended up triggering the reported lack of external
entropy.
* getrandom() active entropy waiting:
Revert "Revert "ext4: make __ext4_get_inode_loc plug""
random: try to actively add entropy rather than passively wait for it
This reverts commit 72dbcf7215.
Instead of waiting forever for entropy that may just not happen, we now
try to actively generate entropy when required, and are thus hopefully
avoiding the problem that caused the nice ext4 IO pattern fix to be
reverted.
So revert the revert.
Cc: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler fixes from Ingo Molnar:
- Apply a number of membarrier related fixes and cleanups, which fixes
a use-after-free race in the membarrier code
- Introduce proper RCU protection for tasks on the runqueue - to get
rid of the subtle task_rcu_dereference() interface that was easy to
get wrong
- Misc fixes, but also an EAS speedup
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Avoid redundant EAS calculation
sched/core: Remove double update_max_interval() call on CPU startup
sched/core: Fix preempt_schedule() interrupt return comment
sched/fair: Fix -Wunused-but-set-variable warnings
sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
sched/membarrier: Return -ENOMEM to userspace on memory allocation failure
sched/membarrier: Skip IPIs when mm->mm_users == 1
selftests, sched/membarrier: Add multi-threaded test
sched/membarrier: Fix p->mm->membarrier_state racy load
sched/membarrier: Call sync_core only before usermode for same mm
sched/membarrier: Remove redundant check
sched/membarrier: Fix private expedited registration check
tasks, sched/core: RCUify the assignment of rq->curr
tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code
tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
tasks: Add a count of task RCU users
sched/core: Convert vcpu_is_preempted() from macro to an inline function
sched/fair: Remove unused cfs_rq_clock_task() function
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
- add a new knfsd file cache, so that we don't have to open and
close on each (NFSv2/v3) READ or WRITE. This can speed up
read and write in some cases. It also replaces our readahead
cache.
- Prevent silent data loss on write errors, by treating write
errors like server reboots for the purposes of write caching,
thus forcing clients to resend their writes.
- Tweak the code that allocates sessions to be more forgiving,
so that NFSv4.1 mounts are less likely to hang when a server
already has a lot of clients.
- Eliminate an arbitrary limit on NFSv4 ACL sizes; they should
now be limited only by the backend filesystem and the
maximum RPC size.
- Allow the server to enforce use of the correct kerberos
credentials when a client reclaims state after a reboot.
And some miscellaneous smaller bugfixes and cleanup.
-----BEGIN PGP SIGNATURE-----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=diBo
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Add a new knfsd file cache, so that we don't have to open and close
on each (NFSv2/v3) READ or WRITE. This can speed up read and write
in some cases. It also replaces our readahead cache.
- Prevent silent data loss on write errors, by treating write errors
like server reboots for the purposes of write caching, thus forcing
clients to resend their writes.
- Tweak the code that allocates sessions to be more forgiving, so
that NFSv4.1 mounts are less likely to hang when a server already
has a lot of clients.
- Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be
limited only by the backend filesystem and the maximum RPC size.
- Allow the server to enforce use of the correct kerberos credentials
when a client reclaims state after a reboot.
And some miscellaneous smaller bugfixes and cleanup"
* tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits)
sunrpc: clean up indentation issue
nfsd: fix nfs read eof detection
nfsd: Make nfsd_reset_boot_verifier_locked static
nfsd: degraded slot-count more gracefully as allocation nears exhaustion.
nfsd: handle drc over-allocation gracefully.
nfsd: add support for upcall version 2
nfsd: add a "GetVersion" upcall for nfsdcld
nfsd: Reset the boot verifier on all write I/O errors
nfsd: Don't garbage collect files that might contain write errors
nfsd: Support the server resetting the boot verifier
nfsd: nfsd_file cache entries should be per net namespace
nfsd: eliminate an unnecessary acl size limit
Deprecate nfsd fault injection
nfsd: remove duplicated include from filecache.c
nfsd: Fix the documentation for svcxdr_tmpalloc()
nfsd: Fix up some unused variable warnings
nfsd: close cached files prior to a REMOVE or RENAME that would replace target
nfsd: rip out the raparms cache
nfsd: have nfsd_test_lock use the nfsd_file cache
nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXYx2zAAKCRDh3BK/laaZ
PFpHAQD2G+F8a9e41jFTJg5YpNKMD8/Pl4T6v9chIO9qPXF2IAEAji0P1JterRfv
ixiBhv54hSwYbk527nxNWE9tP5gAHAQ=
=WCHy
-----END PGP SIGNATURE-----
Merge tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse virtio-fs support from Miklos Szeredi:
"Virtio-fs allows exporting directory trees on the host and mounting
them in guest(s).
This isn't actually a new filesystem, but a glue layer between the
fuse filesystem and a virtio based back-end.
It's similar in functionality to the existing virtio-9p solution, but
significantly faster in benchmarks and has better POSIX compliance.
Further permformance improvements can be achieved by sharing the page
cache between host and guest, allowing for faster I/O and reduced
memory use.
Kata Containers have been including the out-of-tree virtio-fs (with
the shared page cache patches as well) since version 1.7 as an
experimental feature. They have been active in development and plan to
switch from virtio-9p to virtio-fs as their default solution. There
has been interest from other sources as well.
The userspace infrastructure is slated to be merged into qemu once the
kernel part hits mainline.
This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi"
* tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtio-fs: add virtiofs filesystem
virtio-fs: add Documentation/filesystems/virtiofs.rst
fuse: reserve values for mapping protocol
Small fixes all around:
- avoid overlayfs copy-up for PRIVATE mmaps
- KUMSAN uninitialized warning for transport error
- one syzbot memory leak fix in 9p cache
- internal API cleanup for v9fs_fill_super
-----BEGIN PGP SIGNATURE-----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=VBrx
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.4' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"Some of the usual small fixes and cleanup.
Small fixes all around:
- avoid overlayfs copy-up for PRIVATE mmaps
- KUMSAN uninitialized warning for transport error
- one syzbot memory leak fix in 9p cache
- internal API cleanup for v9fs_fill_super"
* tag '9p-for-5.4' of git://github.com/martinetd/linux:
9p/vfs_super.c: Remove unused parameter data in v9fs_fill_super
9p/cache.c: Fix memory leak in v9fs_cache_session_get_cookie
9p: Transport error uninitialized
9p: avoid attaching writeback_fid on mmap with type PRIVATE
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl2OIu4QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpsedD/4h54330vuq66DsGqzFLonLwFl5YHC5NeJX
aV38j7pAUPHvr9CSnr3d2VwTk/ThBtPI50I9/d9SXh8n1oAAA5C/+nPf1XknME47
giKHr3eb0FNLOySt/Ry284gla8mO0GZM83zUbDMnF0N+tfwAtFvbvgCpsPFK9vdL
xNzMLsq6++pj7p9c6IXd+zv0nmJzDikZQz6PtU1KYlbfnU7hh/cP3CrIHIPtGbyk
c/7tfbKTB9UnbW5guGakZt3BzNViJpK28SKn+S6AlLiEOYpC+55dBbaZQIy5qxHv
CZsx0GJIw0Ya0Lw3UEFp/74krLHq2610jmx/va8P7MZCjZAR675G3mjxKUnC/+SY
mEdLo6vghMNAIqMBWNu59CFQOPnqa8sqRii0q6cRWXSqKiFr1FLN8mstb3Ghh9K0
kGVA/gw6ESWB/e/X6I+pD6pTm6O6BPWEqBzGAWSvavQQIP9YpIzf5j+k3JsRu03/
IIzR6gW9k9u4k0rFlOJKbp1+AO5sK3VtJFR8JGELiRwwgjD91w50gjPYak5OGM37
Mi7OHCxqtwFGTkSvT6RM6om6onBsizrveszkrPUO01bWYIHHbtu6ofLyQlfnEtpv
qbGZtLW6KYj9VsIKZNDfg99Ff79IAOiAZDbXWAu/JKyg/gu1Y9uOiVkNFPJGPNHV
8ourcldMGg==
=DEYH
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"Just two things in here:
- Improvement to the io_uring CQ ring wakeup for batched IO (me)
- Fix wrong comparison in poll handling (yangerkun)
I realize the first one is a little late in the game, but it felt
pointless to hold it off until the next release. Went through various
testing and reviews with Pavel and peterz"
* tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block:
io_uring: make CQ ring wakeups be more efficient
io_uring: compare cached_cq_tail with cq.head in_io_uring_poll
[BUG]
The following script can cause btrfs qgroup data space leak:
mkfs.btrfs -f $dev
mount $dev -o nospace_cache $mnt
btrfs subv create $mnt/subv
btrfs quota en $mnt
btrfs quota rescan -w $mnt
btrfs qgroup limit 128m $mnt/subv
for (( i = 0; i < 3; i++)); do
# Create 3 64M holes for latter fallocate to fail
truncate -s 192m $mnt/subv/file
xfs_io -c "pwrite 64m 4k" $mnt/subv/file > /dev/null
xfs_io -c "pwrite 128m 4k" $mnt/subv/file > /dev/null
sync
# it's supposed to fail, and each failure will leak at least 64M
# data space
xfs_io -f -c "falloc 0 192m" $mnt/subv/file &> /dev/null
rm $mnt/subv/file
sync
done
# Shouldn't fail after we removed the file
xfs_io -f -c "falloc 0 64m" $mnt/subv/file
[CAUSE]
Btrfs qgroup data reserve code allow multiple reservations to happen on
a single extent_changeset:
E.g:
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_1M);
btrfs_qgroup_reserve_data(inode, &data_reserved, SZ_1M, SZ_2M);
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_4M);
Btrfs qgroup code has its internal tracking to make sure we don't
double-reserve in above example.
The only pattern utilizing this feature is in the main while loop of
btrfs_fallocate() function.
However btrfs_qgroup_reserve_data()'s error handling has a bug in that
on error it clears all ranges in the io_tree with EXTENT_QGROUP_RESERVED
flag but doesn't free previously reserved bytes.
This bug has a two fold effect:
- Clearing EXTENT_QGROUP_RESERVED ranges
This is the correct behavior, but it prevents
btrfs_qgroup_check_reserved_leak() to catch the leakage as the
detector is purely EXTENT_QGROUP_RESERVED flag based.
- Leak the previously reserved data bytes.
The bug manifests when N calls to btrfs_qgroup_reserve_data are made and
the last one fails, leaking space reserved in the previous ones.
[FIX]
Also free previously reserved data bytes when btrfs_qgroup_reserve_data
fails.
Fixes: 5247255370 ("btrfs: qgroup: Introduce btrfs_qgroup_reserve_data function")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Under the following case with qgroup enabled, if some error happened
after we have reserved delalloc space, then in error handling path, we
could cause qgroup data space leakage:
From btrfs_truncate_block() in inode.c:
ret = btrfs_delalloc_reserve_space(inode, &data_reserved,
block_start, blocksize);
if (ret)
goto out;
again:
page = find_or_create_page(mapping, index, mask);
if (!page) {
btrfs_delalloc_release_space(inode, data_reserved,
block_start, blocksize, true);
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, true);
ret = -ENOMEM;
goto out;
}
[CAUSE]
In the above case, btrfs_delalloc_reserve_space() will call
btrfs_qgroup_reserve_data() and mark the io_tree range with
EXTENT_QGROUP_RESERVED flag.
In the error handling path, we have the following call stack:
btrfs_delalloc_release_space()
|- btrfs_free_reserved_data_space()
|- btrsf_qgroup_free_data()
|- __btrfs_qgroup_release_data(reserved=@reserved, free=1)
|- qgroup_free_reserved_data(reserved=@reserved)
|- clear_record_extent_bits();
|- freed += changeset.bytes_changed;
However due to a completion bug, qgroup_free_reserved_data() will clear
EXTENT_QGROUP_RESERVED flag in BTRFS_I(inode)->io_failure_tree, other
than the correct BTRFS_I(inode)->io_tree.
Since io_failure_tree is never marked with that flag,
btrfs_qgroup_free_data() will not free any data reserved space at all,
causing a leakage.
This type of error handling can only be triggered by errors outside of
qgroup code. So EDQUOT error from qgroup can't trigger it.
[FIX]
Fix the wrong target io_tree.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: bc42bda223 ("btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There may be situations when a server negotiates SMB 2.1
protocol version or higher but responds to a CREATE request
with an oplock rather than a lease.
Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock
break to the initial CREATE and the client doesn't send
an ack back due to a wrong caching level being set (READ
instead of RWH). Missing an oplock break ack makes the
server wait until the break times out which dramatically
increases the latency of the second CREATE.
Fix this by properly detecting oplocks when using SMB 2.1
protocol version and higher.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Various SMB3 ACL related flags (for security descriptor and
ACEs for example) were missing and some fields are different
in SMB3 and CIFS. Update cifsacl.h definitions based on
current MS-DTYP specification.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Stable bugfixes:
- Dequeue the request from the receive queue while we're re-encoding # v4.20+
- Fix buffer handling of GSS MIC without slack # 5.1
Features:
- Increase xprtrdma maximum transport header and slot table sizes
- Add support for nfs4_call_sync() calls using a custom rpc_task_struct
- Optimize the default readahead size
- Enable pNFS filelayout LAYOUTGET on OPEN
Other bugfixes and cleanups:
- Fix possible null-pointer dereferences and memory leaks
- Various NFS over RDMA cleanups
- Various NFS over RDMA comment updates
- Don't receive TCP data into a reset request buffer
- Don't try to parse incomplete RPC messages
- Fix congestion window race with disconnect
- Clean up pNFS return-on-close error handling
- Fixes for NFS4ERR_OLD_STATEID handling
-----BEGIN PGP SIGNATURE-----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=4Ey6
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Dequeue the request from the receive queue while we're re-encoding
# v4.20+
- Fix buffer handling of GSS MIC without slack # 5.1
Features:
- Increase xprtrdma maximum transport header and slot table sizes
- Add support for nfs4_call_sync() calls using a custom
rpc_task_struct
- Optimize the default readahead size
- Enable pNFS filelayout LAYOUTGET on OPEN
Other bugfixes and cleanups:
- Fix possible null-pointer dereferences and memory leaks
- Various NFS over RDMA cleanups
- Various NFS over RDMA comment updates
- Don't receive TCP data into a reset request buffer
- Don't try to parse incomplete RPC messages
- Fix congestion window race with disconnect
- Clean up pNFS return-on-close error handling
- Fixes for NFS4ERR_OLD_STATEID handling"
* tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (53 commits)
pNFS/filelayout: enable LAYOUTGET on OPEN
NFS: Optimise the default readahead size
NFSv4: Handle NFS4ERR_OLD_STATEID in LOCKU
NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE
NFSv4: Fix OPEN_DOWNGRADE error handling
pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid
NFSv4: Add a helper to increment stateid seqids
NFSv4: Handle RPC level errors in LAYOUTRETURN
NFSv4: Handle NFS4ERR_DELAY correctly in return-on-close
NFSv4: Clean up pNFS return-on-close error handling
pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors
NFS: remove unused check for negative dentry
NFSv3: use nfs_add_or_obtain() to create and reference inodes
NFS: Refactor nfs_instantiate() for dentry referencing callers
SUNRPC: Fix congestion window race with disconnect
SUNRPC: Don't try to parse incomplete RPC messages
SUNRPC: Rename xdr_buf_read_netobj to xdr_buf_read_mic
SUNRPC: Fix buffer handling of GSS MIC without slack
SUNRPC: RPC level errors should always set task->tk_rpc_status
SUNRPC: Don't receive TCP data into a request buffer that has been reset
...
When brk was moved for binaries without an interpreter, it should have
been limited to ET_DYN only. In other words, the special case was an
ET_DYN that lacks an INTERP, not just an executable that lacks INTERP.
The bug manifested for giant static executables, where the brk would end
up in the middle of the text area on 32-bit architectures.
Reported-and-tested-by: Richard Kojedzinszky <richard@kojedz.in>
Fixes: bbdc6076d2 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Minor code cleanups.
- Fix a superblock logging error.
- Ensure that collapse range converts the data fork to extents format
when necessary.
- Revert the ALLOC_USERDATA cleanup because it caused subtle
behavior regressions.
-----BEGIN PGP SIGNATURE-----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=D/XD
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"There are a couple of bug fixes and some small code cleanups that came
in recently:
- Minor code cleanups
- Fix a superblock logging error
- Ensure that collapse range converts the data fork to extents format
when necessary
- Revert the ALLOC_USERDATA cleanup because it caused subtle behavior
regressions"
* tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: avoid unused to_mp() function warning
xfs: log proper length of superblock
xfs: revert 1baa2800e6 ("xfs: remove the unused XFS_ALLOC_USERDATA flag")
xfs: removed unneeded variable
xfs: convert inode to extent format after extent merge due to shift
Pull jffs2 fix from Al Viro:
"braino fix for mount API conversion for jffs2"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jffs2: Fix mounting under new mount API
Merge more updates from Andrew Morton:
- almost all of the rest of -mm
- various other subsystems
Subsystems affected by this patch series:
memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork,
cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise,
cleanups, pagemap
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits)
arch/sparc/include/asm/pgtable_64.h: fix build
mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
ntfs: remove (un)?likely() from IS_ERR() conditions
IB/hfi1: remove unlikely() from IS_ERR*() condition
xfs: remove unlikely() from WARN_ON() condition
wimax/i2400m: remove unlikely() from WARN*() condition
fs: remove unlikely() from WARN_ON() condition
xen/events: remove unlikely() from WARN() condition
checkpatch: check for nested (un)?likely() calls
hexagon: drop empty and unused free_initrd_mem
mm: factor out common parts between MADV_COLD and MADV_PAGEOUT
mm: introduce MADV_PAGEOUT
mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM
mm: introduce MADV_COLD
mm: untag user pointers in mmap/munmap/mremap/brk
vfio/type1: untag user pointers in vaddr_get_pfn
tee/shm: untag user pointers in tee_shm_register
media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get
drm/radeon: untag user pointers in radeon_gem_userptr_ioctl
drm/amdgpu: untag user pointers
...
The mounting of jffs2 is broken due to the changes from the new mount API
because it specifies a "source" operation, but then doesn't actually
process it. But because it specified it, it doesn't return -ENOPARAM and
the caller doesn't process it either and the source gets lost.
Fix this by simply removing the source parameter from jffs2 and letting the
VFS deal with it in the default manner.
To test it, enable CONFIG_MTD_MTDRAM and allow the default size and erase
block size parameters, then try and mount the /dev/mtdblock<N> file that
that creates as jffs2. No need to initialise it.
Fixes: ec10a24f10 ("vfs: Convert jffs2 to use the new mount API")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Woodhouse <dwmw2@infradead.org>
cc: Richard Weinberger <richard@nod.at>
cc: linux-mtd@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For batched IO, it's not uncommon for waiters to ask for more than 1
IO to complete before being woken up. This is a problem with
wait_event() since tasks will get woken for every IO that completes,
re-check condition, then go back to sleep. For batch counts on the
order of what you do for high IOPS, that can result in 10s of extra
wakeups for the waiting task.
Add a private wake function that checks for the wake up count criteria
being met before calling autoremove_wake_function(). Pavel reports that
one test case he has runs 40% faster with proper batching of wakeups.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to populate an ACL (security descriptor open context)
on file and directory correct. This patch passes in the
mode. Followon patch will build the open context and the
security descriptor (from the mode) that goes in the open
context.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
userfaultfd code use provided user pointers for vma lookups, which can
only by done with untagged pointers.
Untag user pointers in validate_range().
Link: http://lkml.kernel.org/r/cdc59ddd7011012ca2e689bc88c3b65b1ea7e413.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
In copy_mount_options a user address is being subtracted from TASK_SIZE.
If the address is lower than TASK_SIZE, the size is calculated to not
allow the exact_copy_from_user() call to cross TASK_SIZE boundary.
However if the address is tagged, then the size will be calculated
incorrectly.
Untag the address before subtracting.
Link: http://lkml.kernel.org/r/1de225e4a54204bfd7f25dac2635e31aa4aa1d90.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
brelse() tests whether its argument is NULL and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Link: http://lkml.kernel.org/r/cfff3b81-fb5d-af26-7b5e-724266509045@web.de
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following gcc warning:
fs/reiserfs/do_balan.c: In function balance_leaf_insert_right:
fs/reiserfs/do_balan.c:629:6: warning: variable ret set but not used
[-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/20190827032932.46622-2-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following gcc warning:
fs/reiserfs/journal.c: In function flush_used_journal_lists:
fs/reiserfs/journal.c:1791:6: warning: variable ret set but not used
[-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/20190827032932.46622-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/reiserfs/do_balan.c: In function balance_leaf_when_delete:
fs/reiserfs/do_balan.c:245:20: warning: variable ih set but not used [-Wunused-but-set-variable]
fs/reiserfs/do_balan.c: In function balance_leaf_insert_left:
fs/reiserfs/do_balan.c:301:7: warning: variable version set but not used [-Wunused-but-set-variable]
fs/reiserfs/do_balan.c: In function balance_leaf_insert_right:
fs/reiserfs/do_balan.c:649:7: warning: variable version set but not used [-Wunused-but-set-variable]
fs/reiserfs/do_balan.c: In function balance_leaf_new_nodes_insert:
fs/reiserfs/do_balan.c:953:7: warning: variable version set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566379929-118398-8-git-send-email-zhengbin13@huawei.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/reiserfs/fix_node.c: In function get_num_ver:
fs/reiserfs/fix_node.c:379:6: warning: variable cur_free set but not used [-Wunused-but-set-variable]
fs/reiserfs/fix_node.c: In function dc_check_balance_internal:
fs/reiserfs/fix_node.c:1737:6: warning: variable maxsize set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566379929-118398-7-git-send-email-zhengbin13@huawei.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/reiserfs/prints.c: In function check_internal_block_head:
fs/reiserfs/prints.c:749:21: warning: variable blkh set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566379929-118398-6-git-send-email-zhengbin13@huawei.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/reiserfs/objectid.c: In function reiserfs_convert_objectid_map_v1:
fs/reiserfs/objectid.c:186:25: warning: variable new_objectid_map set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566379929-118398-5-git-send-email-zhengbin13@huawei.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/reiserfs/lbalance.c: In function leaf_paste_entries:
fs/reiserfs/lbalance.c:1325:9: warning: variable old_entry_num set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566379929-118398-4-git-send-email-zhengbin13@huawei.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/reiserfs/stree.c: In function search_by_key:
fs/reiserfs/stree.c:596:6: warning: variable right_neighbor_of_leaf_node set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566379929-118398-3-git-send-email-zhengbin13@huawei.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/reiserfs/journal.c: In function flush_older_commits:
fs/reiserfs/journal.c:894:15: warning: variable first_trans_id set but not used [-Wunused-but-set-variable]
fs/reiserfs/journal.c: In function flush_journal_list:
fs/reiserfs/journal.c:1354:38: warning: variable last set but not used [-Wunused-but-set-variable]
fs/reiserfs/journal.c: In function do_journal_release:
fs/reiserfs/journal.c:1916:6: warning: variable flushed set but not used [-Wunused-but-set-variable]
fs/reiserfs/journal.c: In function do_journal_end:
fs/reiserfs/journal.c:3993:6: warning: variable old_start set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566379929-118398-2-git-send-email-zhengbin13@huawei.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On lines 3430-3434, bh has been assured to be non-null:
cn = get_journal_hash_dev(sb, journal->j_hash_table, blocknr);
if (!cn || !cn->bh) {
return ret;
}
bh = cn->bh;
Thus, the check of bh on line 3447 is unnecessary and can be removed.
Thank Andrew Morton for good advice.
Link: http://lkml.kernel.org/r/20190727084019.11307-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Cc: Bharath Vedartham <linux.bhar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- automatic recovery of a blacklisted filesystem session (Zheng Yan).
This is disabled by default and can be enabled by mounting with the
new "recover_session=clean" option.
- serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is
taken to avoid serializing O_DIRECT reads and writes with each other,
this is based on the exclusion scheme from NFS.
- handle large osdmaps better in the face of fragmented memory (myself)
- don't limit what security.* xattrs can be get or set (Jeff Layton).
We were overly restrictive here, unnecessarily preventing things like
file capability sets stored in security.capability from working.
- allow copy_file_range() within the same inode and across different
filesystems within the same cluster (Luis Henriques)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl2LoD8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzixRYB/9H5S4fif8Pn9eiXkIJiT9UZR/o7S1k
ikfQNPeDxlBLKnoZXpDp2HqCu1/YuCcJ0zpZzPGGrKECZb7r+NaayxhmEXAZ+Vsg
YwsO3eNHBbb58pe9T4oiHp19sflwcTOeNwg8wlvmvrgfBupFz2pU8Xm72EdFyoYm
tP0QNTOCAuQK3pJcgozaptAO1TzBL3LomyVM0YzAKcumgMg47zALpaSLWJLGtDLM
5+5WLvcVfBGLVv60h4B62ldS39eBxqTsFodcRMUaqAsnhLK70HVfKlwR3GgtZggr
PDqbsuIfw/O3b65U2XDKZt1P9dyG3OE/ucueduXUxJPYNGmooEE+PpE+
=DRVP
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- automatic recovery of a blacklisted filesystem session (Zheng Yan).
This is disabled by default and can be enabled by mounting with the
new "recover_session=clean" option.
- serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is
taken to avoid serializing O_DIRECT reads and writes with each
other, this is based on the exclusion scheme from NFS.
- handle large osdmaps better in the face of fragmented memory
(myself)
- don't limit what security.* xattrs can be get or set (Jeff Layton).
We were overly restrictive here, unnecessarily preventing things
like file capability sets stored in security.capability from
working.
- allow copy_file_range() within the same inode and across different
filesystems within the same cluster (Luis Henriques)"
* tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client: (41 commits)
ceph: call ceph_mdsc_destroy from destroy_fs_client
libceph: use ceph_kvmalloc() for osdmap arrays
libceph: avoid a __vmalloc() deadlock in ceph_kvmalloc()
ceph: allow object copies across different filesystems in the same cluster
ceph: include ceph_debug.h in cache.c
ceph: move static keyword to the front of declarations
rbd: pull rbd_img_request_create() dout out into the callers
ceph: reconnect connection if session hang in opening state
libceph: drop unused con parameter of calc_target()
ceph: use release_pages() directly
rbd: fix response length parameter for encoded strings
ceph: allow arbitrary security.* xattrs
ceph: only set CEPH_I_SEC_INITED if we got a MAC label
ceph: turn ceph_security_invalidate_secctx into static inline
ceph: add buffered/direct exclusionary locking for reads and writes
libceph: handle OSD op ceph_pagelist_append() errors
ceph: don't return a value from void function
ceph: don't freeze during write page faults
ceph: update the mtime when truncating up
ceph: fix indentation in __get_snap_name()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXYod6wAKCRDh3BK/laaZ
PG3fAP9WXuvUeYh3X7ThQPa2D33VCIMJRd6t+1TVSSc/H8P3dAD/ehN5HIWjnmzz
iZFc3zDtO9UCJUe23IZomblxOQbu6Qk=
=I0S2
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Continue separating the transport (user/kernel communication) and the
filesystem layers of fuse. Getting rid of most layering violations
will allow for easier cleanup and optimization later on.
- Prepare for the addition of the virtio-fs filesystem. The actual
filesystem will be introduced by a separate pull request.
- Convert to new mount API.
- Various fixes, optimizations and cleanups.
* tag 'fuse-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (55 commits)
fuse: Make fuse_args_to_req static
fuse: fix memleak in cuse_channel_open
fuse: fix beyond-end-of-page access in fuse_parse_cache()
fuse: unexport fuse_put_request
fuse: kmemcg account fs data
fuse: on 64-bit store time in d_fsdata directly
fuse: fix missing unlock_page in fuse_writepage()
fuse: reserve byteswapped init opcodes
fuse: allow skipping control interface and forced unmount
fuse: dissociate DESTROY from fuseblk
fuse: delete dentry if timeout is zero
fuse: separate fuse device allocation and installation in fuse_conn
fuse: add fuse_iqueue_ops callbacks
fuse: extract fuse_fill_super_common()
fuse: export fuse_dequeue_forget() function
fuse: export fuse_get_unique()
fuse: export fuse_send_init_request()
fuse: export fuse_len_args()
fuse: export fuse_end_request()
fuse: fix request limit
...
- Report both io errors and short io results to the directio endio
handler.
- Allow directio callers to pass an ops structure to iomap_dio_rw.
-----BEGIN PGP SIGNATURE-----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=zkFp
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"After last week's failed pull request attempt, I scuttled everything
in the branch except for the directio endio api changes, which were
trivial. Everything else will simply have to wait for the next cycle.
Summary:
- Report both io errors and short io results to the directio endio
handler.
- Allow directio callers to pass an ops structure to iomap_dio_rw"
* tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: move the iomap_dio_rw ->end_io callback into a structure
iomap: split size and error for iomap_dio_rw ->end_io
The membarrier_state field is located within the mm_struct, which
is not guaranteed to exist when used from runqueue-lock-free iteration
on runqueues by the membarrier system call.
Copy the membarrier_state from the mm_struct into the scheduler runqueue
when the scheduler switches between mm.
When registering membarrier for mm, after setting the registration bit
in the mm membarrier state, issue a synchronize_rcu() to ensure the
scheduler observes the change. In order to take care of the case
where a runqueue keeps executing the target mm without swapping to
other mm, iterate over each runqueue and issue an IPI to copy the
membarrier_state from the mm_struct into each runqueue which have the
same mm which state has just been modified.
Move the mm membarrier_state field closer to pgd in mm_struct to use
a cache line already touched by the scheduler switch_mm.
The membarrier_execve() (now membarrier_exec_mmap) hook now needs to
clear the runqueue's membarrier state in addition to clear the mm
membarrier state, so move its implementation into the scheduler
membarrier code so it can access the runqueue structure.
Add memory barrier in membarrier_exec_mmap() prior to clearing
the membarrier state, ensuring memory accesses executed prior to exec
are not reordered with the stores clearing the membarrier state.
As suggested by Linus, move all membarrier.c RCU read-side locks outside
of the for each cpu loops.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[BUG]
With v5.3 kernel, we can't convert to SINGLE profile:
# btrfs balance start -f -dconvert=single $mnt
ERROR: error during balancing '/mnt/btrfs': Invalid argument
# dmesg -t | tail
validate_convert_profile: data profile=0x1000000000000 allowed=0x20 is_valid=1 final=0x1000000000000 ret=1
BTRFS error (device dm-3): balance: invalid convert data profile single
[CAUSE]
With the extra debug output added, it shows that the @allowed bit is
lacking the special in-memory only SINGLE profile bit.
Thus we fail at that (profile & ~allowed) check.
This regression is caused by commit 081db89b13 ("btrfs: use raid_attr
to get allowed profiles for balance conversion") and the fact that we
don't use any bit to indicate SINGLE profile on-disk, but uses special
in-memory only bit to help distinguish different profiles.
[FIX]
Add that BTRFS_AVAIL_ALLOC_BIT_SINGLE to @allowed, so the code should be
the same as it was and fix the regression.
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 081db89b13 ("btrfs: use raid_attr to get allowed profiles for balance conversion")
CC: stable@vger.kernel.org # 5.3+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
One user reported a reproducible KASAN report about use-after-free:
BTRFS info (device sdi1): balance: start -dvrange=1256811659264..1256811659265
BTRFS info (device sdi1): relocating block group 1256811659264 flags data|raid0
==================================================================
BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
Write of size 8 at addr ffff88856f671710 by task kworker/u24:10/261579
CPU: 2 PID: 261579 Comm: kworker/u24:10 Tainted: P OE 5.2.11-arch1-1-kasan #4
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme4, BIOS P3.80 04/06/2018
Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
Call Trace:
dump_stack+0x7b/0xba
print_address_description+0x6c/0x22e
? btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
__kasan_report.cold+0x1b/0x3b
? btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
kasan_report+0x12/0x17
__asan_report_store8_noabort+0x17/0x20
btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
record_root_in_trans+0x2a0/0x370 [btrfs]
btrfs_record_root_in_trans+0xf4/0x140 [btrfs]
start_transaction+0x1ab/0xe90 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
btrfs_finish_ordered_io+0x7bf/0x18a0 [btrfs]
? lock_repin_lock+0x400/0x400
? __kmem_cache_shutdown.cold+0x140/0x1ad
? btrfs_unlink_subvol+0x9b0/0x9b0 [btrfs]
finish_ordered_fn+0x15/0x20 [btrfs]
normal_work_helper+0x1bd/0xca0 [btrfs]
? process_one_work+0x819/0x1720
? kasan_check_read+0x11/0x20
btrfs_endio_write_helper+0x12/0x20 [btrfs]
process_one_work+0x8c9/0x1720
? pwq_dec_nr_in_flight+0x2f0/0x2f0
? worker_thread+0x1d9/0x1030
worker_thread+0x98/0x1030
kthread+0x2bb/0x3b0
? process_one_work+0x1720/0x1720
? kthread_park+0x120/0x120
ret_from_fork+0x35/0x40
Allocated by task 369692:
__kasan_kmalloc.part.0+0x44/0xc0
__kasan_kmalloc.constprop.0+0xba/0xc0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x138/0x260
btrfs_read_tree_root+0x92/0x360 [btrfs]
btrfs_read_fs_root+0x10/0xb0 [btrfs]
create_reloc_root+0x47d/0xa10 [btrfs]
btrfs_init_reloc_root+0x1e2/0x340 [btrfs]
record_root_in_trans+0x2a0/0x370 [btrfs]
btrfs_record_root_in_trans+0xf4/0x140 [btrfs]
start_transaction+0x1ab/0xe90 [btrfs]
btrfs_start_transaction+0x1e/0x20 [btrfs]
__btrfs_prealloc_file_range+0x1c2/0xa00 [btrfs]
btrfs_prealloc_file_range+0x13/0x20 [btrfs]
prealloc_file_extent_cluster+0x29f/0x570 [btrfs]
relocate_file_extent_cluster+0x193/0xc30 [btrfs]
relocate_data_extent+0x1f8/0x490 [btrfs]
relocate_block_group+0x600/0x1060 [btrfs]
btrfs_relocate_block_group+0x3a0/0xa00 [btrfs]
btrfs_relocate_chunk+0x9e/0x180 [btrfs]
btrfs_balance+0x14e4/0x2fc0 [btrfs]
btrfs_ioctl_balance+0x47f/0x640 [btrfs]
btrfs_ioctl+0x119d/0x8380 [btrfs]
do_vfs_ioctl+0x9f5/0x1060
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0xa5/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 369692:
__kasan_slab_free+0x14f/0x210
kasan_slab_free+0xe/0x10
kfree+0xd8/0x270
btrfs_drop_snapshot+0x154c/0x1eb0 [btrfs]
clean_dirty_subvols+0x227/0x340 [btrfs]
relocate_block_group+0x972/0x1060 [btrfs]
btrfs_relocate_block_group+0x3a0/0xa00 [btrfs]
btrfs_relocate_chunk+0x9e/0x180 [btrfs]
btrfs_balance+0x14e4/0x2fc0 [btrfs]
btrfs_ioctl_balance+0x47f/0x640 [btrfs]
btrfs_ioctl+0x119d/0x8380 [btrfs]
do_vfs_ioctl+0x9f5/0x1060
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0xa5/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88856f671100
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1552 bytes inside of
4096-byte region [ffff88856f671100, ffff88856f672100)
The buggy address belongs to the page:
page:ffffea0015bd9c00 refcount:1 mapcount:0 mapping:ffff88864400e600 index:0x0 compound_mapcount: 0
flags: 0x2ffff0000010200(slab|head)
raw: 02ffff0000010200 dead000000000100 dead000000000200 ffff88864400e600
raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88856f671600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88856f671680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88856f671700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88856f671780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88856f671800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
BTRFS info (device sdi1): 1 enospc errors during balance
BTRFS info (device sdi1): balance: ended with status: -28
[CAUSE]
The problem happens when finish_ordered_io() get called with balance
still running, while the reloc root of that subvolume is already dead.
(Tree is swap already done, but tree not yet deleted for possible qgroup
usage.)
That means root->reloc_root still exists, but that reloc_root can be
under btrfs_drop_snapshot(), thus we shouldn't access it.
The following race could cause the use-after-free problem:
CPU1 | CPU2
--------------------------------------------------------------------------
| relocate_block_group()
| |- unset_reloc_control(rc)
| |- btrfs_commit_transaction()
btrfs_finish_ordered_io() | |- clean_dirty_subvols()
|- btrfs_join_transaction() | |
|- record_root_in_trans() | |
|- btrfs_init_reloc_root() | |
|- if (root->reloc_root) | |
| | |- root->reloc_root = NULL
| | |- btrfs_drop_snapshot(reloc_root);
|- reloc_root->last_trans|
= trans->transid |
^^^^^^^^^^^^^^^^^^^^^^
Use after free
[FIX]
Fix it by the following modifications:
- Test if the root has dead reloc tree before accessing root->reloc_root
If the root has BTRFS_ROOT_DEAD_RELOC_TREE, then we don't need to
create or update root->reloc_tree
- Clear the BTRFS_ROOT_DEAD_RELOC_TREE flag until we have fully dropped
reloc tree
To co-operate with above modification, so as long as
BTRFS_ROOT_DEAD_RELOC_TREE is still set, we won't try to re-create
reloc tree at record_root_in_trans().
Reported-by: Cebtenzzre <cebtenzzre@gmail.com>
Fixes: d2311e6985 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Additional reparse tags were described for WSL and file sync.
Add missing defines for these tags. Some will be useful for
POSIX extensions (as discussed at Storage Developer Conference).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
-----BEGIN PGP SIGNATURE-----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=/w5G
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"A collection of later fixes and additions, that weren't quite ready
for pushing out with the initial pull request.
This contains:
- Fix potential use-after-free of shadow requests (Jackie)
- Fix potential OOM crash in request allocation (Jackie)
- kmalloc+memcpy -> kmemdup cleanup (Jackie)
- Fix poll crash regression (me)
- Fix SQ thread not being nice and giving up CPU for !PREEMPT (me)
- Add support for timeouts, making it easier to do epoll_wait()
conversions, for instance (me)
- Ensure io_uring works without f_ops->read_iter() and
f_ops->write_iter() (me)"
* tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block:
io_uring: correctly handle non ->{read,write}_iter() file_operations
io_uring: IORING_OP_TIMEOUT support
io_uring: use cond_resched() in sqthread
io_uring: fix potential crash issue due to io_get_req failure
io_uring: ensure poll commands clear ->sqe
io_uring: fix use-after-free of shadow_req
io_uring: use kmemdup instead of kmalloc and memcpy
Merge updates from Andrew Morton:
- a few hot fixes
- ocfs2 updates
- almost all of -mm (slab-generic, slab, slub, kmemleak, kasan,
cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug,
sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy,
oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap,
zsmalloc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
mm/zsmalloc.c: fix a -Wunused-function warning
zswap: do not map same object twice
zswap: use movable memory if zpool support allocate movable memory
zpool: add malloc_support_movable to zpool_driver
shmem: fix obsolete comment in shmem_getpage_gfp()
mm/madvise: reduce code duplication in error handling paths
mm: mmap: increase sockets maximum memory size pgoff for 32bits
mm/mmap.c: refine find_vma_prev() with rb_last()
riscv: make mmap allocation top-down by default
mips: use generic mmap top-down layout and brk randomization
mips: replace arch specific way to determine 32bit task with generic version
mips: adjust brk randomization offset to fit generic version
mips: use STACK_TOP when computing mmap base address
mips: properly account for stack randomization and stack guard gap
arm: use generic mmap top-down layout and brk randomization
arm: use STACK_TOP when computing mmap base address
arm: properly account for stack randomization and stack guard gap
arm64, mm: make randomization selected by generic topdown mmap layout
arm64, mm: move generic mmap layout functions to mm
arm64: consider stack randomization for mmap base only when necessary
...
Patch series "Provide generic top-down mmap layout functions", v6.
This series introduces generic functions to make top-down mmap layout
easily accessible to architectures, in particular riscv which was the
initial goal of this series. The generic implementation was taken from
arm64 and used successively by arm, mips and finally riscv.
Note that in addition the series fixes 2 issues:
- stack randomization was taken into account even if not necessary.
- [1] fixed an issue with mmap base which did not take into account
randomization but did not report it to arm and mips, so by moving arm64
into a generic library, this problem is now fixed for both
architectures.
This work is an effort to factorize architecture functions to avoid code
duplication and oversights as in [1].
[1]: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1429066.html
This patch (of 14):
This preparatory commit moves this function so that further introduction
of generic topdown mmap layout is contained only in mm/util.c.
Link: http://lkml.kernel.org/r/20190730055113.23635-2-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In previous patch, an application could put part of its text section in
THP via madvise(). These THPs will be protected from writes when the
application is still running (TXTBSY). However, after the application
exits, the file is available for writes.
This patch avoids writes to file THP by dropping page cache for the file
when the file is open for write. A new counter nr_thps is added to struct
address_space. In do_dentry_open(), if the file is open for write and
nr_thps is non-zero, we drop page cache for the whole file.
Link: http://lkml.kernel.org/r/20190801184244.3169074-8-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for non-shmem THP, this patch adds a few stats and exposes
them in /proc/meminfo, /sys/bus/node/devices/<node>/meminfo, and
/proc/<pid>/task/<tid>/smaps.
This patch is mostly a rewrite of Kirill A. Shutemov's earlier version:
https://lkml.kernel.org/r/20170126115819.58875-5-kirill.shutemov@linux.intel.com/
Link: http://lkml.kernel.org/r/20190801184244.3169074-5-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: remove quicklist page table caches".
A while ago Nicholas proposed to remove quicklist page table caches [1].
I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.
[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com
This patch (of 3):
Remove page table allocator "quicklists". These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.
The numbers in the initial commit look interesting but probably don't
apply anymore. If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.
Also it might be better to instead make more general improvements to page
allocator if this is still so slow.
Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace 1 << compound_order(page) with compound_nr(page). Minor
improvements in readability.
Link: http://lkml.kernel.org/r/20190721104612.19120-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Make working with compound pages easier", v2.
These three patches add three helpers and convert the appropriate
places to use them.
This patch (of 3):
It's unnecessarily hard to find out the size of a potentially huge page.
Replace 'PAGE_SIZE << compound_order(page)' with page_size(page).
Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a spelling mistake in a mlog_bug_on_msg message. Fix it.
Link: http://lkml.kernel.org/r/831bdff4-064e-038b-f45d-c4d265cbff1e@linux.alibaba.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Appending truncate log(TA) and and flushing truncate log(TF) are two
separated transactions. They can be both committed but not checkpointed.
If crash occurs then, both transaction will be replayed with several
already released to global bitmap clusters. Then truncate log will be
replayed resulting in cluster double free.
To reproduce this issue, just crash the host while punching hole to files.
Signed-off-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a scenario causing ocfs2 umount hang when multiple hosts are
rebooting at the same time.
NODE1 NODE2 NODE3
send unlock requset to NODE2
dies
become recovery master
recover NODE2
find NODE2 dead
mark resource RECOVERING
directly remove lock from grant list
calculate usage but RECOVERING marked
**miss the window of purging
clear RECOVERING
To reproduce this issue, crash a host and then umount ocfs2
from another node.
To solve this, just let unlock progress wait for recovery done.
Link: http://lkml.kernel.org/r/1550124866-20367-1-git-send-email-gechangwei@live.cn
Signed-off-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
brelse() tests whether its argument is NULL and then returns immediately.
Thus the tests around the shown calls are not needed.
This issue was detected by using the Coccinelle software.
Link: http://lkml.kernel.org/r/55cde320-394b-f985-56ce-1a2abea782aa@web.de
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/ocfs2/dir.c: In function ocfs2_dx_dir_transfer_leaf:
fs/ocfs2/dir.c:3653:42: warning: variable new_list set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566522588-63786-4-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Changwei Ge <chge@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/ocfs2/file.c: In function ocfs2_prepare_inode_for_write:
fs/ocfs2/file.c:2143:9: warning: variable end set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566522588-63786-3-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Changwei Ge <chge@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/ocfs2/namei.c: In function ocfs2_create_inode_in_orphan:
fs/ocfs2/namei.c:2503:23: warning: variable di set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/1566522588-63786-2-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Changwei Ge <chge@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_orphan_scan_exit() is declared but not implemented. Also perform a
minor cleanup in ocfs2_link_credits()
Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA4014FC208AC@H3CMLB12-EX.srv.huawei-3com.com
Signed-off-by: guozhonghua <guozhonghua@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_calc_tree_trunc_credits() is not called anywhere.
Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA4014FC2050F@H3CMLB12-EX.srv.huawei-3com.com
Signed-off-by: guozhonghua <guozhonghua@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to check return value of debugfs_create functions, but
the last sweep through ocfs missed a number of places where this was
happening. There is also no need to save the individual dentries for the
debugfs files, as everything is can just be removed at once when the
directory is removed.
By getting rid of the file dentries for the debugfs entries, a bit of
local memory can be saved as well.
[colin.king@canonical.com: ensure ret is set to zero before returning]
Link: http://lkml.kernel.org/r/20190807121929.28918-1-colin.king@canonical.com
Link: http://lkml.kernel.org/r/20190731132119.GA12603@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jia Guo <guojia12@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since ext4/ocfs2 are using jbd2_inode dirty range scoping APIs now,
jbd2_journal_inode_add_[write|wait] are not used any more, remove them.
Link: http://lkml.kernel.org/r/1562977611-8412-2-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Acked-by: Changwei Ge <chge@linux.alibaba.com>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6ba0e7dc64 ("jbd2: introduce jbd2_inode dirty range scoping") allow us
scoping each of the inode dirty ranges associated with a given
transaction, and ext4 already does this way.
Now let's also use the newly introduced jbd2_inode dirty range scoping to
prevent us from waiting forever when trying to complete a journal
transaction in ocfs2.
Link: http://lkml.kernel.org/r/1562977611-8412-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Changwei Ge <chge@linux.alibaba.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If userspace reads the buffer via blockdev while mounting,
sb_getblk()+modify can race with buffer read via blockdev.
For example,
FS userspace
bh = sb_getblk()
modify bh->b_data
read
ll_rw_block(bh)
fill bh->b_data by on-disk data
/* lost modified data by FS */
set_buffer_uptodate(bh)
set_buffer_uptodate(bh)
Userspace should not use the blockdev while mounting though, the udev
seems to be already doing this. Although I think the udev should try to
avoid this, workaround the race by small overhead.
Link: http://lkml.kernel.org/r/87pnk7l3sw.fsf_-_@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the flag to the filelayout driver to add LAYOUTGET to
the OPEN compound.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In the years since the max readahead size was fixed in NFS, a number of
things have happened:
- Users can now set the value directly using /sys/class/bdi
- NFS max supported block sizes have increased by several orders of
magnitude from 64K to 1MB.
- Disk access latencies are orders of magnitude faster due to SSD + NVME.
In particular note that if the server is advertising 1MB as the optimal
read size, as that will set the readahead size to 15MB.
Let's therefore adjust down, and try to default to VM_READAHEAD_PAGES.
However let's inform the VM about our preferred block size so that it
can choose to round up in cases where that makes sense.
Reported-by: Alkis Georgopoulos <alkisg@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull more mount API conversions from Al Viro:
"Assorted conversions of options parsing to new API.
gfs2 is probably the most serious one here; the rest is trivial stuff.
Other things in what used to be #work.mount are going to wait for the
next cycle (and preferably go via git trees of the filesystems
involved)"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gfs2: Convert gfs2 to fs_context
vfs: Convert spufs to use the new mount API
vfs: Convert hypfs to use the new mount API
hypfs: Fix error number left in struct pointer member
vfs: Convert functionfs to use the new mount API
vfs: Convert bpf to use the new mount API
to_mp() was first introduced with the following commit:
'commit 801cc4e17a ("xfs: debug mode forced buffered write failure")'
But the user of to_mp() was removed by below commit:
'commit f8c47250ba ("xfs: convert drop_writes to use the errortag
mechanism")'
So kernel build with clang throws below warning message:
fs/xfs/xfs_sysfs.c:72:1: warning: unused function 'to_mp' [-Wunused-function]
to_mp(struct kobject *kobject)
Hence to_mp() might be removed safely to get rid of warning message.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_trans_log_buf takes first byte, last byte as args. In this
case, it should be from 0 to sizeof() - 1.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is a race between setting up a qgroup rescan worker and completing
a qgroup rescan worker that can lead to callers of the qgroup rescan wait
ioctl to either not wait for the rescan worker to complete or to hang
forever due to missing wake ups. The following diagram shows a sequence
of steps that illustrates the race.
CPU 1 CPU 2 CPU 3
btrfs_ioctl_quota_rescan()
btrfs_qgroup_rescan()
qgroup_rescan_init()
mutex_lock(&fs_info->qgroup_rescan_lock)
spin_lock(&fs_info->qgroup_lock)
fs_info->qgroup_flags |=
BTRFS_QGROUP_STATUS_FLAG_RESCAN
init_completion(
&fs_info->qgroup_rescan_completion)
fs_info->qgroup_rescan_running = true
mutex_unlock(&fs_info->qgroup_rescan_lock)
spin_unlock(&fs_info->qgroup_lock)
btrfs_init_work()
--> starts the worker
btrfs_qgroup_rescan_worker()
mutex_lock(&fs_info->qgroup_rescan_lock)
fs_info->qgroup_flags &=
~BTRFS_QGROUP_STATUS_FLAG_RESCAN
mutex_unlock(&fs_info->qgroup_rescan_lock)
starts transaction, updates qgroup status
item, etc
btrfs_ioctl_quota_rescan()
btrfs_qgroup_rescan()
qgroup_rescan_init()
mutex_lock(&fs_info->qgroup_rescan_lock)
spin_lock(&fs_info->qgroup_lock)
fs_info->qgroup_flags |=
BTRFS_QGROUP_STATUS_FLAG_RESCAN
init_completion(
&fs_info->qgroup_rescan_completion)
fs_info->qgroup_rescan_running = true
mutex_unlock(&fs_info->qgroup_rescan_lock)
spin_unlock(&fs_info->qgroup_lock)
btrfs_init_work()
--> starts another worker
mutex_lock(&fs_info->qgroup_rescan_lock)
fs_info->qgroup_rescan_running = false
mutex_unlock(&fs_info->qgroup_rescan_lock)
complete_all(&fs_info->qgroup_rescan_completion)
Before the rescan worker started by the task at CPU 3 completes, if
another task calls btrfs_ioctl_quota_rescan(), it will get -EINPROGRESS
because the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN is set at
fs_info->qgroup_flags, which is expected and correct behaviour.
However if other task calls btrfs_ioctl_quota_rescan_wait() before the
rescan worker started by the task at CPU 3 completes, it will return
immediately without waiting for the new rescan worker to complete,
because fs_info->qgroup_rescan_running is set to false by CPU 2.
This race is making test case btrfs/171 (from fstests) to fail often:
btrfs/171 9s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad)
--- tests/btrfs/171.out 2018-09-16 21:30:48.505104287 +0100
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad 2019-09-19 02:01:36.938486039 +0100
@@ -1,2 +1,3 @@
QA output created by 171
+ERROR: quota rescan failed: Operation now in progress
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/171.out /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad' to see the entire diff)
That is because the test calls the btrfs-progs commands "qgroup quota
rescan -w", "qgroup assign" and "qgroup remove" in a sequence that makes
calls to the rescan start ioctl fail with -EINPROGRESS (note the "btrfs"
commands 'qgroup assign' and 'qgroup remove' often call the rescan start
ioctl after calling the qgroup assign ioctl,
btrfs_ioctl_qgroup_assign()), since previous waits didn't actually wait
for a rescan worker to complete.
Another problem the race can cause is missing wake ups for waiters,
since the call to complete_all() happens outside a critical section and
after clearing the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN. In the sequence
diagram above, if we have a waiter for the first rescan task (executed
by CPU 2), then fs_info->qgroup_rescan_completion.wait is not empty, and
if after the rescan worker clears BTRFS_QGROUP_STATUS_FLAG_RESCAN and
before it calls complete_all() against
fs_info->qgroup_rescan_completion, the task at CPU 3 calls
init_completion() against fs_info->qgroup_rescan_completion which
re-initilizes its wait queue to an empty queue, therefore causing the
rescan worker at CPU 2 to call complete_all() against an empty queue,
never waking up the task waiting for that rescan worker.
Fix this by clearing BTRFS_QGROUP_STATUS_FLAG_RESCAN and setting
fs_info->qgroup_rescan_running to false in the same critical section,
delimited by the mutex fs_info->qgroup_rescan_lock, as well as doing the
call to complete_all() in that same critical section. This gives the
protection needed to avoid rescan wait ioctl callers not waiting for a
running rescan worker and the lost wake ups problem, since setting that
rescan flag and boolean as well as initializing the wait queue is done
already in a critical section delimited by that mutex (at
qgroup_rescan_init()).
Fixes: 57254b6ebc ("Btrfs: add ioctl to wait for qgroup rescan completion")
Fixes: d2c609b834 ("btrfs: properly track when rescan worker is running")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix sparse warning:
fs/fuse/dev.c:468:6: warning: symbol 'fuse_args_to_req' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Fixes: 68583165f9 ("fuse: add pages to fuse_args")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This function has been made static, which now causes a compile-time
warning:
WARNING: "fuse_put_request" [vmlinux] is a static EXPORT_SYMBOL_GPL
Remove the unneeded export.
Fixes: 66abc3599c ("fuse: unexport request ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
account per-file, dentry, and inode data
blockdev/superblock and temporary per-request data was left alone, as
this usually isn't accounted
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Implements the optimization noted in commit f75fdf22b0 ("fuse: don't
use ->d_time"), as the additional memory can be significant. (In
particular, on SLAB configurations this 8-byte alloc becomes 32 bytes).
Per-dentry, this can consume significant memory.
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
unlock_page() was missing in case of an already in-flight write against the
same page.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Fixes: ff17be0864 ("fuse: writepage: skip already in flight")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
After 75b28af("io_uring: allocate the two rings together"), we compare
sq.head with cached_cq_tail to determine does there any cq invalid.
Actually, we should use cq.head.
Fixes: 75b28affdd ("io_uring: allocate the two rings together")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If lock_extent_buffer_for_io() fails, it returns a negative value, but its
caller btree_write_cache_pages() ignores such error. This means that a
call to flush_write_bio(), from lock_extent_buffer_for_io(), might have
failed. We should make btree_write_cache_pages() notice such error values
and stop immediatelly, making sure filemap_fdatawrite_range() returns an
error to the transaction commit path. A failure from flush_write_bio()
should also result in the endio callback end_bio_extent_buffer_writepage()
being invoked, which sets the BTRFS_FS_*_ERR bits appropriately, so that
there's no risk a transaction or log commit doesn't catch a writeback
failure.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before, if a eb failed to write out, we would end up triggering a
BUG_ON(). As of f4340622e0 ("btrfs: extent_io: Move the BUG_ON() in
flush_write_bio() one level up"), we no longer BUG_ON(), so we should
make life consistent and add back the unwritten bytes to
dirty_metadata_bytes.
Fixes: f4340622e0 ("btrfs: extent_io: Move the BUG_ON() in flush_write_bio() one level up")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Filipe Manana <fdmanana@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Some of the self tests create a test inode, setup some extents and then do
calls to btrfs_get_extent() to test that the corresponding extent maps
exist and are correct. However btrfs_get_extent(), since the 5.2 merge
window, now errors out when it finds a regular or prealloc extent for an
inode that does not correspond to a regular file (its ->i_mode is not
S_IFREG). This causes the self tests to fail sometimes, specially when
KASAN, slub_debug and page poisoning are enabled:
$ modprobe btrfs
modprobe: ERROR: could not insert 'btrfs': Invalid argument
$ dmesg
[ 9414.691648] Btrfs loaded, crc32c=crc32c-intel, debug=on, assert=on, integrity-checker=on, ref-verify=on
[ 9414.692655] BTRFS: selftest: sectorsize: 4096 nodesize: 4096
[ 9414.692658] BTRFS: selftest: running btrfs free space cache tests
[ 9414.692918] BTRFS: selftest: running extent only tests
[ 9414.693061] BTRFS: selftest: running bitmap only tests
[ 9414.693366] BTRFS: selftest: running bitmap and extent tests
[ 9414.696455] BTRFS: selftest: running space stealing from bitmap to extent tests
[ 9414.697131] BTRFS: selftest: running extent buffer operation tests
[ 9414.697133] BTRFS: selftest: running btrfs_split_item tests
[ 9414.697564] BTRFS: selftest: running extent I/O tests
[ 9414.697583] BTRFS: selftest: running find delalloc tests
[ 9415.081125] BTRFS: selftest: running find_first_clear_extent_bit test
[ 9415.081278] BTRFS: selftest: running extent buffer bitmap tests
[ 9415.124192] BTRFS: selftest: running inode tests
[ 9415.124195] BTRFS: selftest: running btrfs_get_extent tests
[ 9415.127909] BTRFS: selftest: running hole first btrfs_get_extent test
[ 9415.128343] BTRFS critical (device (efault)): regular/prealloc extent found for non-regular inode 256
[ 9415.131428] BTRFS: selftest: fs/btrfs/tests/inode-tests.c:904 expected a real extent, got 0
This happens because the test inodes are created without ever initializing
the i_mode field of the inode, and neither VFS's new_inode() nor the btrfs
callback btrfs_alloc_inode() initialize the i_mode. Initialization of the
i_mode is done through the various callbacks used by the VFS to create
new inodes (regular files, directories, symlinks, tmpfiles, etc), which
all call btrfs_new_inode() which in turn calls inode_init_owner(), which
sets the inode's i_mode. Since the tests only uses new_inode() to create
the test inodes, the i_mode was never initialized.
This always happens on a VM I used with kasan, slub_debug and many other
debug facilities enabled. It also happened to someone who reported this
on bugzilla (on a 5.3-rc).
Fix this by setting i_mode to S_IFREG at btrfs_new_test_inode().
Fixes: 6bf9e4bd6a ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204397
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It should not be larger then the slab max buf size. If user
specifies a larger size, it passes this check and goes
straightly to SMB2_set_info_init performing an insecure memcpy.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/cifs/sess.c: In function sess_auth_lanman:
fs/cifs/sess.c:910:8: warning: variable capabilities set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix sparse warnings:
fs/cifs/smb2pdu.c:3200:1: warning: symbol 'SMB2_notify_init' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were not bumping up the "open on server" (num_remote_opens)
counter (in some cases) on opens of the share root so
could end up showing as a negative value.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Currently, the knfsd server assumes that a short read indicates an
end of file. That assumption is incorrect. The short read means that
either we've hit the end of file, or we've hit a read error.
In the case of a read error, the client may want to retry (as per the
implementation recommendations in RFC1813 and RFC7530), but currently it
is being told that it hit an eof.
Move the code to detect eof from version specific code into the generic
nfsd read.
Report eof only in the two following cases:
1) read() returns a zero length short read with no error.
2) the offset+length of the read is >= the file size.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Returned value directly instead of using variable as it wasn't updated.
Signed-off-by: Aliasgar Surti <aliasgar.surti500@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The collapse range operation can merge extents if two newly adjacent
extents are physically contiguous. If the extent count is reduced on
a btree format inode, a change to extent format might be necessary.
This format change currently occurs as a side effect of the file
size update after extents have been shifted for the collapse. This
codepath ultimately calls xfs_bunmapi(), which happens to check for
and execute the format conversion even if there were no blocks
removed from the mapping.
While this ultimately puts the inode into the correct state, the
fact the format conversion occurs in a separate transaction from the
change that called for it is a problem. If an extent shift
transaction commits and the filesystem happens to crash before the
format conversion, the inode fork is left in a corrupted state after
log recovery. The inode fork verifier fails and xfs_repair
ultimately nukes the inode. This problem was originally reproduced
by generic/388.
Similar to how the insert range extent split code handles extent to
btree conversion, update the collapse range extent merge code to
handle btree to extent format conversion in the same transaction
that merges the extents. This ensures that the inode fork format
remains consistent if the filesystem happens to crash in the middle
of a collapse range operation that changes the inode fork format.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=n4ht
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM hooks, and SELinux access control hooks, for dnotify,
fanotify, and inotify watches. This has been discussed with both the
LSM and fs/notify folks and everybody is good with these new hooks.
- The LSM stacking changes missed a few calls to current_security() in
the SELinux code; we fix those and remove current_security() for
good.
- Improve our network object labeling cache so that we always return
the object's label, even when under memory pressure. Previously we
would return an error if we couldn't allocate a new cache entry, now
we always return the label even if we can't create a new cache entry
for it.
- Convert the sidtab atomic_t counter to a normal u32 with
READ/WRITE_ONCE() and memory barrier protection.
- A few patches to policydb.c to clean things up (remove forward
declarations, long lines, bad variable names, etc)
* tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm: remove current_security()
selinux: fix residual uses of current_security() for the SELinux blob
selinux: avoid atomic_t usage in sidtab
fanotify, inotify, dnotify, security: add security hook for fs notifications
selinux: always return a secid from the network caches if we find one
selinux: policydb - rename type_val_to_struct_array
selinux: policydb - fix some checkpatch.pl warnings
selinux: shuffle around policydb.c to get rid of forward declarations
Currently we just -EINVAL a read or write to an fd that isn't backed
by ->read_iter() or ->write_iter(). But we can handle them just fine,
as long as we punt fo async context first.
Implement a simple loop function for doing ->read() or ->write()
instead, and ensure we call it appropriately.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix sparse warning:
fs/nfsd/nfssvc.c:364:6: warning:
symbol 'nfsd_reset_boot_verifier_locked' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are two problems in dcache_readdir() - one is that lockless traversal
of the list needs non-trivial cooperation of d_alloc() (at least a switch
to list_add_rcu(), and probably more than just that) and another is that
it assumes that no removal will happen without the directory locked exclusive.
Said assumption had always been there, never had been stated explicitly and
is violated by several places in the kernel (devpts and selinuxfs).
* replacement of next_positive() with different calling conventions:
it returns struct list_head * instead of struct dentry *; the latter is
passed in and out by reference, grabbing the result and dropping the original
value.
* scan is under ->d_lock. If we run out of timeslice, cursor is moved
after the last position we'd reached and we reschedule; then the scan continues
from that place. To avoid livelocks between multiple lseek() (with cursors
getting moved past each other, never reaching the real entries) we always
skip the cursors, need_resched() or not.
* returned list_head * is either ->d_child of dentry we'd found or
->d_subdirs of parent (if we got to the end of the list).
* dcache_readdir() and dcache_dir_lseek() switched to new helper.
dcache_readdir() always holds a reference to dentry passed to dir_emit() now.
Cursor is moved to just before the entry where dir_emit() has failed or into
the very end of the list, if we'd run out.
* move_cursor() eliminated - it had sucky calling conventions and
after fixing that it became simply list_move() (in lseek and scan_positives)
or list_move_tail() (in readdir).
All operations with the list are under ->d_lock now, and we do not
depend upon having all file removals done with parent locked exclusive
anymore.
Cc: stable@vger.kernel.org
Reported-by: "zhengbin (A)" <zhengbin13@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Use asynchronous glocks and timeouts to recover from deadlocks during rename
and exchange: the lock ordering constraints the vfs uses are not sufficient
to prevent deadlocks across multiple nodes.
- Add support for IOMAP_ZERO and use iomap_zero_range to replace gfs2 specific
code.
- Various other minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=tUTY
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Use asynchronous glocks and timeouts to recover from deadlocks during
rename and exchange: the lock ordering constraints the vfs uses are
not sufficient to prevent deadlocks across multiple nodes.
- Add support for IOMAP_ZERO and use iomap_zero_range to replace gfs2
specific code.
- Various other minor fixes and cleanups.
* tag 'gfs2-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: clear buf_in_tr when ending a transaction in sweep_bh_for_rgrps
gfs2: Improve mmap write vs. truncate consistency
gfs2: Use async glocks for rename
gfs2: create function gfs2_glock_update_hold_time
gfs2: separate holder for rgrps in gfs2_rename
gfs2: Delete an unnecessary check before brelse()
gfs2: Minor PAGE_SIZE arithmetic cleanups
gfs2: Fix recovery slot bumping
gfs2: Fix possible fs name overflows
gfs2: untangle the logic in gfs2_drevalidate
gfs2: Always mark inode dirty in fallocate
gfs2: Minor gfs2_alloc_inode cleanup
gfs2: implement gfs2_block_zero_range using iomap_zero_range
gfs2: Add support for IOMAP_ZERO
gfs2: gfs2_iomap_begin cleanup
In this round, we introduced casefolding support in f2fs, and fixed various bugs
in individual features such as IO alignment, checkpoint=disable, quota, and
swapfile.
Enhancement:
- support casefolding w/ enhancement in ext4
- support fiemap for directory
- support FS_IO_GET|SET_FSLABEL
Bug fix:
- fix IO stuck during checkpoint=disable
- avoid infinite GC loop
- fix panic/overflow related to IO alignment feature
- fix livelock in swap file
- fix discard command leak
- disallow dio for atomic_write
-----BEGIN PGP SIGNATURE-----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=oonf
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we introduced casefolding support in f2fs, and fixed
various bugs in individual features such as IO alignment,
checkpoint=disable, quota, and swapfile.
Enhancement:
- support casefolding w/ enhancement in ext4
- support fiemap for directory
- support FS_IO_GET|SET_FSLABEL
Bug fix:
- fix IO stuck during checkpoint=disable
- avoid infinite GC loop
- fix panic/overflow related to IO alignment feature
- fix livelock in swap file
- fix discard command leak
- disallow dio for atomic_write"
* tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: add a condition to detect overflow in f2fs_ioc_gc_range()
f2fs: fix to add missing F2FS_IO_ALIGNED() condition
f2fs: fix to fallback to buffered IO in IO aligned mode
f2fs: fix to handle error path correctly in f2fs_map_blocks
f2fs: fix extent corrupotion during directIO in LFS mode
f2fs: check all the data segments against all node ones
f2fs: Add a small clarification to CONFIG_FS_F2FS_FS_SECURITY
f2fs: fix inode rwsem regression
f2fs: fix to avoid accessing uninitialized field of inode page in is_alive()
f2fs: avoid infinite GC loop due to stale atomic files
f2fs: Fix indefinite loop in f2fs_gc()
f2fs: convert inline_data in prior to i_size_write
f2fs: fix error path of f2fs_convert_inline_page()
f2fs: add missing documents of reserve_root/resuid/resgid
f2fs: fix flushing node pages when checkpoint is disabled
f2fs: enhance f2fs_is_checkpoint_ready()'s readability
f2fs: clean up __bio_alloc()'s parameter
f2fs: fix wrong error injection path in inc_valid_block_count()
f2fs: fix to writeout dirty inode during node flush
f2fs: optimize case-insensitive lookups
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl2EssMACgkQnJ2qBz9k
QNn+LQgApjz2kxt/0foigI5WEdzrS7aFDwyH9NMNRN8b5+cTlYcZCv/UWk8OOtKY
bZL5WJetmTan7K+6iFozbIICx/FVij9eIPpqHCxVV34huyHb8pdEH5kn/K0Zos3g
h+J9+6efwHuyuWDCWVYYPUAtSIRTNbdF3lCCvaiO/V2AKhqejtRt9u2/LK+eJAKv
k7tnuYi0R26HmSabTZMRcMiexRBuCsmCfxvZ01z93htCucAhc4BEJvCaQCgPQKGT
vnr+rb7QxrakO0zB0v5MWjv6FveDq+5IzKTYz7OHhiitWeXZz+ATYMeXFL2tjfJH
18BbnalcksQJOqq95yPxwtKZ/2tPKQ==
=CNjT
-----END PGP SIGNATURE-----
Merge tag 'for_v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, quota, udf fixes and cleanups from Jan Kara:
- two small quota fixes (in grace time handling and possible missed
accounting of preallocated blocks beyond EOF).
- some ext2 cleanups
- udf fixes for better compatibility with Windows 10 generated media
(named streams, write-protection using domain-identifier, placement
of volume recognition sequence)
- some udf cleanups
* tag 'for_v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: fix wrong condition in is_quota_modification()
fs-udf: Delete an unnecessary check before brelse()
ext2: Delete an unnecessary check before brelse()
udf: Drop forward function declarations
udf: Verify domain identifier fields
udf: augment UDF permissions on new inodes
udf: Use dynamic debug infrastructure
udf: reduce leakage of blocks related to named streams
udf: prevent allocation beyond UDF partition
quota: fix condition for resetting time limit in do_set_dqblk()
ext2: code cleanup for ext2_free_blocks()
ext2: fix block range in ext2_data_block_valid()
udf: support 2048-byte spacing of VRS descriptors on 4K media
udf: refactor VRS descriptor identification
about the state of the extent status cache.
Dropped workaround for pre-1970 dates which were encoded incorrectly
in pre-4.4 kernels. Since both the kernel correctly generates, and
e2fsck detects and fixes this issue for the past four years, it'e time
to drop the workaround. (Also, it's not like files with dates in the
distant past were all that common in the first place.)
A lot of miscellaneous bug fixes and cleanups, including some ext4
Documentation fixes. Also included are two minor bug fixes in
fs/unicode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl2D5ZIACgkQ8vlZVpUN
gaO8NQf+ONLK5nu8KUk14uh8MOXMisiT+g1iqhynZcqtuZzTr4nKqUbHLmPDHrCC
RiD/gkLhp6u+UlzYRJq6nudunid1be2/1bjoUm6lddE4XLtbeGHhZsGn1+9K/wy+
l8UFMXd8fCOlXNzajS85Hb0KSuzlrGYEjSrNecSa3KLxrv1kM1+FyKFcqQ7Ejs5/
VZYNtWo69R4wSEIawGkEZuNu/wFeLOzqJgxFJLo6zFxTAp449bbEduz12ssmkUhl
QbXH9cXLR4pAZykzMRqHC8UFFTKmpLnc5EiT1Ajxzu4EAzB1SzqRJvbz/3CF3d/Z
gBKDrDlasv75VJqVtqw4mCxmEoEYjw==
=Iwrf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Added new ext4 debugging ioctls to allow userspace to get information
about the state of the extent status cache.
Dropped workaround for pre-1970 dates which were encoded incorrectly
in pre-4.4 kernels. Since both the kernel correctly generates, and
e2fsck detects and fixes this issue for the past four years, it'e time
to drop the workaround. (Also, it's not like files with dates in the
distant past were all that common in the first place.)
A lot of miscellaneous bug fixes and cleanups, including some ext4
Documentation fixes. Also included are two minor bug fixes in
fs/unicode"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
unicode: make array 'token' static const, makes object smaller
unicode: Move static keyword to the front of declarations
ext4: add missing bigalloc documentation.
ext4: fix kernel oops caused by spurious casefold flag
ext4: fix integer overflow when calculating commit interval
ext4: use percpu_counters for extent_status cache hits/misses
ext4: fix potential use after free after remounting with noblock_validity
jbd2: add missing tracepoint for reserved handle
ext4: fix punch hole for inline_data file systems
ext4: rework reserved cluster accounting when invalidating pages
ext4: documentation fixes
ext4: treat buffers with write errors as containing valid data
ext4: fix warning inside ext4_convert_unwritten_extents_endio
ext4: set error return correctly when ext4_htree_store_dirent fails
ext4: drop legacy pre-1970 encoding workaround
ext4: add new ioctl EXT4_IOC_GET_ES_CACHE
ext4: add a new ioctl EXT4_IOC_GETSTATE
ext4: add a new ioctl EXT4_IOC_CLEAR_ES_CACHE
jbd2: flush_descriptor(): Do not decrease buffer head's ref count
ext4: remove unnecessary error check
...
UBI:
- Be less stupid when placing a fastmap anchor
- Try harder to get an empty PEB in case of contention
- Make ubiblock to warn if image is not a multiple of 512
UBIFS:
- Various fixes in error paths
JFFS2:
- Various fixes in error paths
-----BEGIN PGP SIGNATURE-----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=ptT1
-----END PGP SIGNATURE-----
Merge tag 'upstream-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI, UBIFS and JFFS2 updates from Richard Weinberger:
"UBI:
- Be less stupid when placing a fastmap anchor
- Try harder to get an empty PEB in case of contention
- Make ubiblock to warn if image is not a multiple of 512
UBIFS:
- Various fixes in error paths
JFFS2:
- Various fixes in error paths"
* tag 'upstream-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: Fix memory leak in jffs2_scan_eraseblock() error path
jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_page
jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()
ubi: block: Warn if volume size is not multiple of 512
ubifs: Fix memory leak bug in alloc_ubifs_info() error path
ubifs: Fix memory leak in __ubifs_node_verify_hmac error path
ubifs: Fix memory leak in read_znode() error path
ubi: ubi_wl_get_peb: Increase the number of attempts while getting PEB
ubi: Don't do anchor move within fastmap area
ubifs: Remove redundant assignment to pointer fname
This cycle mainly saw lots of bug fixes and clean up code across the core
code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better with
the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl2A1ugACgkQOG33FX4g
mxp+EQ//Ug8CyyDs40SGZztItoGghuQ4TVA2pXtuZ9LkFVJRWhYPJGOadHIYXqGO
KQJJpZPQ02HTZUPWBZNKmD5bwHfErm4cS73/mVmUpximnUqu/UsLRJp8SIGmBg1D
W1Lz1BJX24MdV8aUnChYvdL5Hbl52q+BaE99Z0haOvW7I3YnKJC34mR8m/A5MiRf
rsNIZNPHdq2U6pKLgCbOyXib8yBcJQqBb8x4WNAoB1h4MOx+ir5QLfr3ozrZs1an
xXgqyiOBmtkUgCMIpXC4juPN/6gw3Y5nkk2VIWY+MAY1a7jZPbI+6LJZZ1Uk8R44
Lf2KSzabFMMYGKJYE1Znxk+JWV8iE+m+n6wWEfRM9l0b4gXXbrtKgaouFbsLcsQA
CvBEQuiFSO9Kq01JPaAN1XDmhqyTarG6lHjXnW7ifNlLXnPbR1RJlprycExOhp0c
axum5K2fRNW2+uZJt+zynMjk2kyjT1lnlsr1Rbgc4Pyionaiydg7zwpiac7y/bdS
F7/WqdmPiff78KMi187EF5pjFqMWhthvBtTbWDuuxaxc2nrXSdiCUN+96j1amQUH
yU/7AZzlnKeKEQQCR4xddsSs2eTrXiLLFRLk9GCK2eh4cUN212eHTrPLKkQf1cN+
ydYbR2pxw3B38LCCNBy+bL+u7e/Tyehs4ynATMpBuEgc5iocTwE=
=zHXW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA subsystem updates from Jason Gunthorpe:
"This cycle mainly saw lots of bug fixes and clean up code across the
core code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better
with the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA: Fix double-free in srq creation error flow
RDMA/efa: Fix incorrect error print
IB/mlx5: Free mpi in mp_slave mode
IB/mlx5: Use the original address for the page during free_pages
RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
RDMA/hns: Package operations of rq inline buffer into separate functions
RDMA/hns: Optimize cmd init and mode selection for hip08
IB/hfi1: Define variables as unsigned long to fix KASAN warning
IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
IB/hfi1: Add traces for TID RDMA READ
RDMA/siw: Relax from kmap_atomic() use in TX path
IB/iser: Support up to 16MB data transfer in a single command
RDMA/siw: Fix page address mapping in TX path
RDMA: Fix goto target to release the allocated memory
RDMA/usnic: Avoid overly large buffers on stack
RDMA/odp: Add missing cast for 32 bit
RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
Documentation/infiniband: update name of some functions
RDMA/cma: Fix false error message
RDMA/hns: Fix wrong assignment of qp_access_flags
...
This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a cleanup
to the page walker API and a few memremap related changes round out the
series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of drivers by
using a refcount get/put attachment idiom and remove the convoluted
mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its only
user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without providing
a struct device
- Make walk_page_range() and related use a constant structure for function
pointers
-----BEGIN PGP SIGNATURE-----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=FRGg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
In order to debug certain problems it is important to be able
to decrypt network traces (e.g. wireshark) but to do this we
need to be able to dump out the encryption/decryption keys.
Dumping them to an ioctl is safer than dumping then to dmesg,
(and better than showing all keys in a pseudofile).
Restrict this to root (CAP_SYS_ADMIN), and only for a mount
that this admin has access to.
Sample smbinfo output:
SMB3.0 encryption
Session Id: 0x82d2ec52
Session Key: a5 6d 81 d0 e c1 ca e1 d8 13 aa 20 e8 f2 cc 71
Server Encryption Key: 1a c3 be ba 3d fc dc 3c e bc 93 9e 50 9e 19 c1
Server Decryption Key: e0 d4 d9 43 1b a2 1b e3 d8 76 77 49 56 f7 20 88
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a LOCKU request receives a NFS4ERR_OLD_STATEID, then bump the
seqid before resending. Ensure we only bump the seqid by 1.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If a CLOSE or OPEN_DOWNGRADE operation receives a NFS4ERR_OLD_STATEID
then bump the seqid before resending. Ensure we only bump the seqid
by 1.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If OPEN_DOWNGRADE returns a state error, then we want to initiate
state recovery in addition to marking the stateid as closed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If a LAYOUTRETURN receives a reply of NFS4ERR_OLD_STATEID then assume we've
missed an update, and just bump the stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add a helper function to increment stateid seqids according to the
rules specified in RFC5661 Section 8.2.2.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Handle RPC level errors by assuming that the RPC call was successful.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the server sends a NFS4ERR_DELAY, then allow the caller to retry.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Both close and delegreturn have identical code to handle pNFS
return-on-close. This patch refactors that code and places it
in pnfs.c
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
IF the server rejected our layout return with a state error such as
NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want
to clear out all the remaining layout segments and mark that stateid
as invalid.
Fixes: 1c5bd76d17 ("pNFS: Enable layoutreturn operation for...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This check has been hanging out since we used to have parallel paths to add
dentry in nfs_create(), but that hasn't been the case for some years.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit b0c6108ecf ("nfs_instantiate(): prevent multiple aliases for
directory inode"), nfs_instantiate() may succeed without actually
instantiating the dentry that was passed in. That can be problematic for
some callers in NFSv3, so this patch breaks things up so we can get the
actual dentry obtained.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Initial support for running on a system with an Ultravisor, which is software
that runs below the hypervisor and protects guests against some attacks by
the hypervisor.
- Support for building the kernel to run as a "Secure Virtual Machine", ie. as
a guest capable of running on a system with an Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with medium
sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas macros, both
to make it more readable and also enable some future optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to:
Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh
Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin
Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy,
Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens,
David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar,
Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari
Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras,
Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor,
Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram
Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj,
Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung
Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde.
-----BEGIN PGP SIGNATURE-----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=WlW+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
Pavel Begunkov