UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
825,223 Commits 6 Branches 27 Tags 3.2 GiB
Commit Graph

825223 Commits

Author SHA1 Message Date
Lukas Wunner d268f31552 net: ks8851: Delay requesting IRQ until opened 
The ks8851 driver currently requests the IRQ before registering the
net_device.  Because the net_device name is used as IRQ name and is
still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs
apart if multiple ks8851 chips are present.  Most other drivers delay
requesting the IRQ until the net_device is opened.  Do the same.

The driver doesn't enable interrupts on the chip before opening the
net_device and disables them when closing it, so there doesn't seem to
be a need to request the IRQ already on probe.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-20 12:43:52 -07:00
Lukas Wunner 761cfa979a net: ks8851: Reassert reset pin if chip ID check fails 
Commit 73fdeb82e9 ("net: ks8851: Add optional vdd_io regulator and
reset gpio") amended the ks8851 driver to briefly assert the chip's
reset pin on probe. It also amended the probe routine's error path to
reassert the reset pin if a subsequent initialization step fails.

However the commit misplaced reassertion of the reset pin in the error
path such that it is not performed if the check of the Chip ID and
Enable Register (CIDER) fails. The error path is therefore slightly
asymmetrical to the probe routine's body. Fix it.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-20 12:43:52 -07:00
Lukas Wunner 536d3680fd net: ks8851: Dequeue RX packets explicitly 
The ks8851 driver lets the chip auto-dequeue received packets once they
have been read in full. It achieves that by setting the ADRFE flag in
the RXQCR register ("Auto-Dequeue RXQ Frame Enable").

However if allocation of a packet's socket buffer or retrieval of the
packet over the SPI bus fails, the packet will not have been read in
full and is not auto-dequeued. Such partial retrieval of a packet
confuses the chip's RX queue management:  On the next RX interrupt,
the first packet read from the queue will be the one left there
previously and this one can be retrieved without issues. But for any
newly received packets, the frame header status and byte count registers
(RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval.

The chip allows explicitly dequeueing a packet from the RX queue by
setting the RRXEF flag in the RXQCR register ("Release RX Error Frame").
This could be used to dequeue the packet in case of an error, but if
that error is a failed SPI transfer, it is unknown if the packet was
transferred in full and was auto-dequeued or if it was only transferred
in part and requires an explicit dequeue. The safest approach is thus
to always dequeue packets explicitly and forgo auto-dequeueing.

Without this change, I've witnessed packet retrieval break completely
when an SPI DMA transfer fails, requiring a chip reset. Explicit
dequeueing magically fixes this and makes packet retrieval absolutely
robust for me.

The chip's documentation suggests auto-dequeuing and uses the RRXEF
flag only to dequeue error frames which the driver doesn't want to
retrieve. But that seems to be a fair-weather approach.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-20 12:43:52 -07:00
Song Liu 6987561c9e perf annotate: Enable annotation of BPF programs 
In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso calls into
a new function symbol__disassemble_bpf(), where annotation line
information is filled based on the bpf_prog_info and btf data saved in
given perf_env.

symbol__disassemble_bpf() uses binutils's libopcodes to disassemble bpf
programs.

Committer testing:

After fixing this:

  -               u64 *addrs = (u64 *)(info_linear->info.jited_ksyms);
  +               u64 *addrs = (u64 *)(uintptr_t)(info_linear->info.jited_ksyms);

Detected when crossbuilding to a 32-bit arch.

And making all this dependent on HAVE_LIBBFD_SUPPORT and
HAVE_LIBBPF_SUPPORT:

1) Have a BPF program running, one that has BTF info, etc, I used
   the tools/perf/examples/bpf/augmented_raw_syscalls.c put in place
   by 'perf trace'.

  # grep -B1 augmented_raw ~/.perfconfig
  [trace]
	add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
  #
  # perf trace -e *mmsg
  dnf/6245 sendmmsg(20, 0x7f5485a88030, 2, MSG_NOSIGNAL) = 2
  NetworkManager/10055 sendmmsg(22<socket:[1056822]>, 0x7f8126ad1bb0, 2, MSG_NOSIGNAL) = 2

2) Then do a 'perf record' system wide for a while:

  # perf record -a
  ^C[ perf record: Woken up 68 times to write data ]
  [ perf record: Captured and wrote 19.427 MB perf.data (366891 samples) ]
  #

3) Check that we captured BPF and BTF info in the perf.data file:

  # perf report --header-only | grep 'b[pt]f'
  # event : name = cycles:ppp, , id = { 294789, 294790, 294791, 294792, 294793, 294794, 294795, 294796 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 41
  # bpf_prog_info of id 42
  # btf info of id 2
  #

4) Check which programs got recorded:

   # perf report | grep bpf_prog | head
     0.16%  exe              bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.14%  exe              bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.08%  fuse-overlayfs   bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.07%  fuse-overlayfs   bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.01%  clang-4.0        bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.01%  clang-4.0        bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  clang            bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.00%  runc             bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  clang            bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  sh               bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
  #

  This was with the default --sort order for 'perf report', which is:

    --sort comm,dso,symbol

  If we just look for the symbol, for instance:

   # perf report --sort symbol | grep bpf_prog | head
     0.26%  [k] bpf_prog_819967866022f1e1_sys_enter                -      -
     0.24%  [k] bpf_prog_c1bd85c092d6e4aa_sys_exit                 -      -
   #

  or the DSO:

   # perf report --sort dso | grep bpf_prog | head
     0.26%  bpf_prog_819967866022f1e1_sys_enter
     0.24%  bpf_prog_c1bd85c092d6e4aa_sys_exit
  #

We'll see the two BPF programs that augmented_raw_syscalls.o puts in
place,  one attached to the raw_syscalls:sys_enter and another to the
raw_syscalls:sys_exit tracepoints, as expected.

Now we can finally do, from the command line, annotation for one of
those two symbols, with the original BPF program source coude intermixed
with the disassembled JITed code:

  # perf annotate --stdio2 bpf_prog_819967866022f1e1_sys_enter

  Samples: 950  of event 'cycles:ppp', 4000 Hz, Event count (approx.): 553756947, [percent: local period]
  bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
  Percent      int sys_enter(struct syscall_enter_args *args)
   53.41         push   %rbp

    0.63         mov    %rsp,%rbp
    0.31         sub    $0x170,%rsp
    1.93         sub    $0x28,%rbp
    7.02         mov    %rbx,0x0(%rbp)
    3.20         mov    %r13,0x8(%rbp)
    1.07         mov    %r14,0x10(%rbp)
    0.61         mov    %r15,0x18(%rbp)
    0.11         xor    %eax,%eax
    1.29         mov    %rax,0x20(%rbp)
    0.11         mov    %rdi,%rbx
               	return bpf_get_current_pid_tgid();
    2.02       → callq  *ffffffffda6776d9
    2.76         mov    %eax,-0x148(%rbp)
                 mov    %rbp,%rsi
               int sys_enter(struct syscall_enter_args *args)
                 add    $0xfffffffffffffeb8,%rsi
               	return bpf_map_lookup_elem(pids, &pid) != NULL;
                 movabs $0xffff975ac2607800,%rdi

    1.26       → callq  *ffffffffda6789e9
                 cmp    $0x0,%rax
    2.43       → je     0
                 add    $0x38,%rax
    0.21         xor    %r13d,%r13d
               	if (pid_filter__has(&pids_filtered, getpid()))
    0.81         cmp    $0x0,%rax
               → jne    0
                 mov    %rbp,%rdi
               	probe_read(&augmented_args.args, sizeof(augmented_args.args), args);
    2.22         add    $0xfffffffffffffeb8,%rdi
    0.11         mov    $0x40,%esi
    0.32         mov    %rbx,%rdx
    2.74       → callq  *ffffffffda658409
               	syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
    0.22         mov    %rbp,%rsi
    1.69         add    $0xfffffffffffffec0,%rsi
               	syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
                 movabs $0xffff975bfcd36000,%rdi

                 add    $0xd0,%rdi
    0.21         mov    0x0(%rsi),%eax
    0.93         cmp    $0x200,%rax
               → jae    0
    0.10         shl    $0x3,%rax

    0.11         add    %rdi,%rax
    0.11       → jmp    0
                 xor    %eax,%eax
               	if (syscall == NULL || !syscall->enabled)
    1.07         cmp    $0x0,%rax
               → je     0
               	if (syscall == NULL || !syscall->enabled)
    6.57         movzbq 0x0(%rax),%rdi

               	if (syscall == NULL || !syscall->enabled)
                 cmp    $0x0,%rdi
    0.95       → je     0
                 mov    $0x40,%r8d
               	switch (augmented_args.args.syscall_nr) {
                 mov    -0x140(%rbp),%rdi
               	switch (augmented_args.args.syscall_nr) {
                 cmp    $0x2,%rdi
               → je     0
                 cmp    $0x101,%rdi
               → je     0
                 cmp    $0x15,%rdi
               → jne    0
               	case SYS_OPEN:	 filename_arg = (const void *)args->args[0];
                 mov    0x10(%rbx),%rdx
               → jmp    0
               	case SYS_OPENAT: filename_arg = (const void *)args->args[1];
                 mov    0x18(%rbx),%rdx
               	if (filename_arg != NULL) {
                 cmp    $0x0,%rdx
               → je     0
                 xor    %edi,%edi
               		augmented_args.filename.reserved = 0;
                 mov    %edi,-0x104(%rbp)
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %rbp,%rdi
                 add    $0xffffffffffffff00,%rdi
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    $0x100,%esi
               → callq  *ffffffffda658499
                 mov    $0x148,%r8d
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %eax,-0x108(%rbp)
               		augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %rax,%rdi
                 shl    $0x20,%rdi

                 shr    $0x20,%rdi

               		if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) {
                 cmp    $0xff,%rdi
               → ja     0
               			len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size;
                 add    $0x48,%rax
               			len &= sizeof(augmented_args.filename.value) - 1;
                 and    $0xff,%rax
                 mov    %rax,%r8
                 mov    %rbp,%rcx
               	return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len);
                 add    $0xfffffffffffffeb8,%rcx
                 mov    %rbx,%rdi
                 movabs $0xffff975fbd72d800,%rsi

                 mov    $0xffffffff,%edx
               → callq  *ffffffffda658ad9
                 mov    %rax,%r13
               }
                 mov    %r13,%rax
    0.72         mov    0x0(%rbp),%rbx
                 mov    0x8(%rbp),%r13
    1.16         mov    0x10(%rbp),%r14
    0.10         mov    0x18(%rbp),%r15
    0.42         add    $0x28,%rbp
    0.54         leaveq
    0.54       ← retq
  #

Please see 'man perf-config' to see how to control what should be seen,
via ~/.perfconfig [annotate] section, for instance, one can suppress the
source code and see just the disassembly, etc.

Alternatively, use the TUI bu just using 'perf annotate', press
'/bpf_prog' to see the bpf symbols, press enter and do the interactive
annotation, which allows for dumping to a file after selecting the
the various output tunables, for instance, the above without source code
intermixed, plus showing all the instruction offsets:

  # perf annotate bpf_prog_819967866022f1e1_sys_enter

Then press: 's' to hide the source code + 'O' twice to show all
instruction offsets, then 'P' to print to the
bpf_prog_819967866022f1e1_sys_enter.annotation file, which will have:

  # cat bpf_prog_819967866022f1e1_sys_enter.annotation
  bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
  Event: cycles:ppp

   53.41    0:   push   %rbp

    0.63    1:   mov    %rsp,%rbp
    0.31    4:   sub    $0x170,%rsp
    1.93    b:   sub    $0x28,%rbp
    7.02    f:   mov    %rbx,0x0(%rbp)
    3.20   13:   mov    %r13,0x8(%rbp)
    1.07   17:   mov    %r14,0x10(%rbp)
    0.61   1b:   mov    %r15,0x18(%rbp)
    0.11   1f:   xor    %eax,%eax
    1.29   21:   mov    %rax,0x20(%rbp)
    0.11   25:   mov    %rdi,%rbx
    2.02   28: → callq  *ffffffffda6776d9
    2.76   2d:   mov    %eax,-0x148(%rbp)
           33:   mov    %rbp,%rsi
           36:   add    $0xfffffffffffffeb8,%rsi
           3d:   movabs $0xffff975ac2607800,%rdi

    1.26   47: → callq  *ffffffffda6789e9
           4c:   cmp    $0x0,%rax
    2.43   50: → je     0
           52:   add    $0x38,%rax
    0.21   56:   xor    %r13d,%r13d
    0.81   59:   cmp    $0x0,%rax
           5d: → jne    0
           63:   mov    %rbp,%rdi
    2.22   66:   add    $0xfffffffffffffeb8,%rdi
    0.11   6d:   mov    $0x40,%esi
    0.32   72:   mov    %rbx,%rdx
    2.74   75: → callq  *ffffffffda658409
    0.22   7a:   mov    %rbp,%rsi
    1.69   7d:   add    $0xfffffffffffffec0,%rsi
           84:   movabs $0xffff975bfcd36000,%rdi

           8e:   add    $0xd0,%rdi
    0.21   95:   mov    0x0(%rsi),%eax
    0.93   98:   cmp    $0x200,%rax
           9f: → jae    0
    0.10   a1:   shl    $0x3,%rax

    0.11   a5:   add    %rdi,%rax
    0.11   a8: → jmp    0
           aa:   xor    %eax,%eax
    1.07   ac:   cmp    $0x0,%rax
           b0: → je     0
    6.57   b6:   movzbq 0x0(%rax),%rdi

           bb:   cmp    $0x0,%rdi
    0.95   bf: → je     0
           c5:   mov    $0x40,%r8d
           cb:   mov    -0x140(%rbp),%rdi
           d2:   cmp    $0x2,%rdi
           d6: → je     0
           d8:   cmp    $0x101,%rdi
           df: → je     0
           e1:   cmp    $0x15,%rdi
           e5: → jne    0
           e7:   mov    0x10(%rbx),%rdx
           eb: → jmp    0
           ed:   mov    0x18(%rbx),%rdx
           f1:   cmp    $0x0,%rdx
           f5: → je     0
           f7:   xor    %edi,%edi
           f9:   mov    %edi,-0x104(%rbp)
           ff:   mov    %rbp,%rdi
          102:   add    $0xffffffffffffff00,%rdi
          109:   mov    $0x100,%esi
          10e: → callq  *ffffffffda658499
          113:   mov    $0x148,%r8d
          119:   mov    %eax,-0x108(%rbp)
          11f:   mov    %rax,%rdi
          122:   shl    $0x20,%rdi

          126:   shr    $0x20,%rdi

          12a:   cmp    $0xff,%rdi
          131: → ja     0
          133:   add    $0x48,%rax
          137:   and    $0xff,%rax
          13d:   mov    %rax,%r8
          140:   mov    %rbp,%rcx
          143:   add    $0xfffffffffffffeb8,%rcx
          14a:   mov    %rbx,%rdi
          14d:   movabs $0xffff975fbd72d800,%rsi

          157:   mov    $0xffffffff,%edx
          15c: → callq  *ffffffffda658ad9
          161:   mov    %rax,%r13
          164:   mov    %r13,%rax
    0.72  167:   mov    0x0(%rbp),%rbx
          16b:   mov    0x8(%rbp),%r13
    1.16  16f:   mov    0x10(%rbp),%r14
    0.10  173:   mov    0x18(%rbp),%r15
    0.42  177:   add    $0x28,%rbp
    0.54  17b:   leaveq
    0.54  17c: ← retq

Another cool way to test all this is to symple use 'perf top' look for
those symbols, go there and press enter, annotate it live :-)

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-20 16:43:15 -03:00
Song Liu 8a1b171821 perf build: Check what binutils's 'disassembler()' signature to use 
Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils
repo, which changed the disassembler() function signature, so we must
use the feature test introduced in fb982666e3 ("tools/bpftool: fix
bpftool build with bintutils >= 2.9") to deal with that.

Committer testing:

After adding the missing function call to test-all.c, and:

  FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes

And the fallbacks for cases where we need -liberty and sometimes -lz to
tools/perf/Makefile.config, we get:

  $ make -C tools/perf O=/tmp/build/perf install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j8' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...        disassembler-four-args: [ on  ]
    CC       /tmp/build/perf/jvmti/libjvmti.o
    CC       /tmp/build/perf/builtin-bench.o
  <SNIP>
  $
  $

The feature detection test-all.bin gets successfully built and linked:

  $ ls -la /tmp/build/perf/feature/test-all.bin
  -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin
  $ nm /tmp/build/perf/feature/test-all.bin  | grep -w disassembler
  0000000000061f90 T disassembler
  $

Time to move on to the patches that make use of this disassembler()
routine in binutils's libopcodes.

Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-20 16:42:10 -03:00
Filipe Manana 0ccc3876e4 Btrfs: fix assertion failure on fsync with NO_HOLES enabled 
Back in commit a89ca6f24f ("Btrfs: fix fsync after truncate when
no_holes feature is enabled") I added an assertion that is triggered when
an inline extent is found to assert that the length of the (uncompressed)
data the extent represents is the same as the i_size of the inode, since
that is true most of the time I couldn't find or didn't remembered about
any exception at that time. Later on the assertion was expanded twice to
deal with a case of a compressed inline extent representing a range that
matches the sector size followed by an expanding truncate, and another
case where fallocate can update the i_size of the inode without adding
or updating existing extents (if the fallocate range falls entirely within
the first block of the file). These two expansion/fixes of the assertion
were done by commit 7ed586d0a8 ("Btrfs: fix assertion on fsync of
regular file when using no-holes feature") and commit 6399fb5a0b
("Btrfs: fix assertion failure during fsync in no-holes mode").
These however missed the case where an falloc expands the i_size of an
inode to exactly the sector size and inline extent exists, for example:

 $ mkfs.btrfs -f -O no-holes /dev/sdc
 $ mount /dev/sdc /mnt

 $ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar
 wrote 1096/1096 bytes at offset 0
 1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec)

 $ xfs_io -c "falloc 1096 3000" /mnt/foobar
 $ xfs_io -c "fsync" /mnt/foobar
 Segmentation fault

 $ dmesg
 [701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727
 [701253.602962] ------------[ cut here ]------------
 [701253.603224] kernel BUG at fs/btrfs/ctree.h:3533!
 [701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
 [701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G        W         5.0.0-rc8-btrfs-next-45 #1
 [701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
 [701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs]
 (...)
 [701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286
 [701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000
 [701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868
 [701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000
 [701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18
 [701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80
 [701253.607769] FS:  00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000
 [701253.608163] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0
 [701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [701253.609608] Call Trace:
 [701253.609994]  btrfs_log_inode+0xdfb/0xe40 [btrfs]
 [701253.610383]  btrfs_log_inode_parent+0x2be/0xa60 [btrfs]
 [701253.610770]  ? do_raw_spin_unlock+0x49/0xc0
 [701253.611150]  btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
 [701253.611537]  btrfs_sync_file+0x3b2/0x440 [btrfs]
 [701253.612010]  ? do_sysinfo+0xb0/0xf0
 [701253.612552]  do_fsync+0x38/0x60
 [701253.612988]  __x64_sys_fsync+0x10/0x20
 [701253.613360]  do_syscall_64+0x60/0x1b0
 [701253.613733]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 [701253.614103] RIP: 0033:0x7f14da4e66d0
 (...)
 [701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
 [701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0
 [701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003
 [701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010
 [701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260
 [701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10
 (...)
 [701253.619941] ---[ end trace e088d74f132b6da5 ]---

Updating the assertion again to allow for this particular case would result
in a meaningless assertion, plus there is currently no risk of logging
content that would result in any corruption after a log replay if the size
of the data encoded in an inline extent is greater than the inode's i_size
(which is not currently possibe either with or without compression),
therefore just remove the assertion.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
 2019-03-20 19:53:39 +01:00
Luo Jiaxing 0e83fc61ee scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset() 
We found out that for v2 hw, a SATA disk can not be written to after the
system comes up.

In commit ffb1c820b8 ("scsi: hisi_sas: remove the check of sas_dev status
in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an
internal abort for a SATA device, but without following it with a
softreset.

We need to always follow an internal abort with a software reset, as per HW
programming flow, so add this.

Fixes: ffb1c820b8 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()")
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
 2019-03-20 14:24:04 -04:00
Rasmus Villemoes 89dc891792 irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp 
The lpi_range_list is supposed to be sorted in ascending order of
->base_id (at least if the range merging is to work), but the current
comparison function returns a positive value if rb->base_id >
ra->base_id, which means that list_sort() will put A after B in that
case - and vice versa, of course.

Fixes: 880cb3cddd (irqchip/gic-v3-its: Refactor LPI allocator)
Cc: stable@vger.kernel.org (v4.19+)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
 2019-03-20 18:20:39 +00:00
Xin Long ef82bcfa67 sctp: use memdup_user instead of vmemdup_user 
In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates
memory with addrs_size which is passed from userspace. We used flag
GFP_USER to put some more restrictions on it in Commit cacc062152
("sctp: use GFP_USER for user-controlled kmalloc").

However, since Commit c981f254cc ("sctp: use vmemdup_user() rather
than badly open-coding memdup_user()"), vmemdup_user() has been used,
which doesn't check GFP_USER flag when goes to vmalloc_*(). So when
addrs_size is a huge value, it could exhaust memory and even trigger
oom killer.

This patch is to use memdup_user() instead, in which GFP_USER would
work to limit the memory allocation with a huge addrs_size.

Note we can't fix it by limiting 'addrs_size', as there's no demand
for it from RFC.

Reported-by: syzbot+ec1b7575afef85a0e5ca@syzkaller.appspotmail.com
Fixes: c981f254cc ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-20 11:09:47 -07:00
Xin Long 1c87e79a00 ipv6: make ip6_create_rt_rcu return ip6_null_entry instead of NULL 
Jianlin reported a crash:

  [  381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
  [  381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160
  [  382.009615] Call Trace:
  [  382.020762]  <IRQ>
  [  382.030174]  ip6_route_redirect.isra.52+0xc9/0xf0
  [  382.050984]  ip6_redirect+0xb6/0xf0
  [  382.066731]  icmpv6_notify+0xca/0x190
  [  382.083185]  ndisc_redirect_rcv+0x10f/0x160
  [  382.102569]  ndisc_rcv+0xfb/0x100
  [  382.117725]  icmpv6_rcv+0x3f2/0x520
  [  382.133637]  ip6_input_finish+0xbf/0x460
  [  382.151634]  ip6_input+0x3b/0xb0
  [  382.166097]  ipv6_rcv+0x378/0x4e0

It was caused by the lookup function __ip6_route_redirect() returns NULL in
fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL.

So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry
instead of NULL.

v1->v2:
  - move down 'fallback:' to make it more readable.

Fixes: e873e4b9cc ("ipv6: use fib6_info_hold_safe() when necessary")
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-20 11:06:56 -07:00
Linus Torvalds 54c4901645 ARC updates for 5.1-rc2 
- unaligned access support for HS cores
 
  - Removed extra memory barrier around spinlock code
 
  - HSDK platform updates: enable dmac, reset
 
  - some more boot logging updates
 
  - misclleneous minor fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJckWU3AAoJEGnX8d3iisJeh9sP/jAu5RP5lrDbxXsEC9MX5WSB
 8s+Ja77Nx3f6XfEv/Ii+cnYMxTXpdvYMt3YePsP/9oelNzzkoPWb6PmkGdEYcof/
 IXDvtEsCdF7qoi6MEWeADIbUsZSxF9ZDJfCirPptOOWWEi34gApkoyjbSNwipNRv
 ZEUWBlc7nURbEFR4Gly0qB+JFuIJbpw8g7T8qU835jQiJ4f6O4y+Etx5YGc3k1B8
 9WU0Wl8Dog358lqHdcCFsymRlCIqTGZ9h/HAO1QIco2q9BYHzjR1koPks9WlYMBs
 p0q3k2Pquhathb04HFXwQxCfXpaRUw1jJ4WR8hGTKHedywMsvnfiaODZKHxIQiMM
 E451oGfVQO4NcVEVvlWlpkCYlZVYgq9O1YBIAB/KKy5O9TlmcRzKJijLKEw+tpaF
 7djp+n+xVf3jeB77/feH8ryuqjaJklA5Zb+1gPt4lD8zJgzmpQ7cmtHOIVmroB6Q
 VTt35Of7SX131pF3HPdMcbx6Cvjs61pox33miR5k9qbkq07M8zCtFneoX9bJV5k3
 Fu7qFU/M2d/EQwnsavh6nURfePWIcd/c4rayIRFEye8oRX8mvpi5mHhP0wVz0D1R
 1eIWulI4xisNZo3kWOnhgCdLSFFsn+K4YdQu73PGdFqFDjs6ltgsTYolVKSCDQFq
 XTZoIXmArVYvMWkAl3pq
 =fFs9
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - unaligned access support for HS cores

 - Removed extra memory barrier around spinlock code

 - HSDK platform updates: enable dmac, reset

 - some more boot logging updates

 - misc minor fixes

* tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arch: arc: Kconfig: pedantic formatting
  ARCv2: spinlock: remove the extra smp_mb before lock, after unlock
  ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access
  ARC: boot log: cut down on verbosity
  ARCv2: boot log: refurbish HS core/release identification
  arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM
  ARC: u-boot args: check that magic number is correct
  ARC: perf: bpok condition only exists for ARCompact
  ARCv2: Add explcit unaligned access support (and ability to disable too)
  ARCv2: lib: introduce memcpy optimized for unaligned access
  ARC: [plat-hsdk]: Enable AXI DW DMAC support
  ARC: [plat-hsdk]: Add reset controller handle to manage USB reset
  ARC: DTB: [scripted] fix node name and address spelling
 2019-03-20 11:01:52 -07:00
Christoph Paasch 398f0132c1 net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec 
Since commit fc62814d69 ("net/packet: fix 4gb buffer limit due to overflow check")
one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller
found that that triggers a warning:

[   21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0
[   21.101490] Modules linked in:
[   21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146
[   21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630
[   21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3
[   21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246
[   21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000
[   21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000
[   21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67
[   21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d
[   21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d
[   21.112552] FS:  00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000
[   21.113612] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0
[   21.115367] Call Trace:
[   21.115705]  ? __alloc_pages_slowpath+0x21c0/0x21c0
[   21.116362]  alloc_pages_current+0xac/0x1e0
[   21.116923]  kmalloc_order+0x18/0x70
[   21.117393]  kmalloc_order_trace+0x18/0x110
[   21.117949]  packet_set_ring+0x9d5/0x1770
[   21.118524]  ? packet_rcv_spkt+0x440/0x440
[   21.119094]  ? lock_downgrade+0x620/0x620
[   21.119646]  ? __might_fault+0x177/0x1b0
[   21.120177]  packet_setsockopt+0x981/0x2940
[   21.120753]  ? __fget+0x2fb/0x4b0
[   21.121209]  ? packet_release+0xab0/0xab0
[   21.121740]  ? sock_has_perm+0x1cd/0x260
[   21.122297]  ? selinux_secmark_relabel_packet+0xd0/0xd0
[   21.123013]  ? __fget+0x324/0x4b0
[   21.123451]  ? selinux_netlbl_socket_setsockopt+0x101/0x320
[   21.124186]  ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0
[   21.124908]  ? __lock_acquire+0x529/0x3200
[   21.125453]  ? selinux_socket_setsockopt+0x5d/0x70
[   21.126075]  ? __sys_setsockopt+0x131/0x210
[   21.126533]  ? packet_release+0xab0/0xab0
[   21.127004]  __sys_setsockopt+0x131/0x210
[   21.127449]  ? kernel_accept+0x2f0/0x2f0
[   21.127911]  ? ret_from_fork+0x8/0x50
[   21.128313]  ? do_raw_spin_lock+0x11b/0x280
[   21.128800]  __x64_sys_setsockopt+0xba/0x150
[   21.129271]  ? lockdep_hardirqs_on+0x37f/0x560
[   21.129769]  do_syscall_64+0x9f/0x450
[   21.130182]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

We should allocate with __GFP_NOWARN to handle this.

Cc: Kal Conley <kal.conley@dectris.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Fixes: fc62814d69 ("net/packet: fix 4gb buffer limit due to overflow check")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-20 10:46:50 -07:00
Matthias Kaehlcke e5a5af7718 arm64: remove obsolete selection of MULTI_IRQ_HANDLER 
The arm64 config selects MULTI_IRQ_HANDLER, which was renamed to
GENERIC_IRQ_MULTI_HANDLER by commit 4c301f9b6a ("ARM: Convert
to GENERIC_IRQ_MULTI_HANDLER"). The 'new' option is already
selected, so just remove the obsolete entry.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
 2019-03-20 17:34:16 +00:00
Ilya Dryomov 9d4a227f6e rbd: drop wait_for_latest_osdmap() 
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
 2019-03-20 16:27:40 +01:00
Ilya Dryomov bb229bbb3b libceph: wait for latest osdmap in ceph_monc_blacklist_add() 
Because map updates are distributed lazily, an OSD may not know about
the new blacklist for quite some time after "osd blacklist add" command
is completed.  This makes it possible for a blacklisted but still alive
client to overwrite a post-blacklist update, resulting in data
corruption.

Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using
the post-blacklist epoch for all post-blacklist requests ensures that
all such requests "wait" for the blacklist to come into force on their
respective OSDs.

Cc: stable@vger.kernel.org
Fixes: 6305a3b415 ("libceph: support for blacklisting clients")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
 2019-03-20 16:27:40 +01:00
Ben Hutchings 8bc0868998 powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations 
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is
enabled, and that was the case before commit 4ffe713b75
("powerpc/mm: Increase the max addressable memory to 2PB").

On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now
define it as 46.  That is larger than the real number of physical
address bits, and breaks calculations in zsmalloc:

  mm/zsmalloc.c:130:49: warning: right shift count is negative
    MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
                                                   ^~
  ...
  mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope
    struct size_class *size_class[ZS_SIZE_CLASSES];
                       ^~~~~~~~~~

Fixes: 4ffe713b75 ("powerpc/mm: Increase the max addressable memory to 2PB")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2019-03-21 00:16:45 +11:00
Marco Felsch 032f85c936 ARM: dts: pfla02: increase phy reset duration 
Increase the reset duration to ensure correct phy functionality. The
reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
pfla02: use long enough reset for ethernet phy"):

  Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
  small percentage of modules have 'transmission timeouts' errors like

  barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
  warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
  eth0: 1000Mbps full duplex link detected
  eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout
  T eth0: transmission timeout

Cc: Stefan Christ <s.christ@phytec.de>
Cc: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: 3180f95666 ("ARM: dts: Phytec imx6q pfla02 and pbab01 support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2019-03-20 19:37:10 +08:00
Taehee Yoo b25a31bf0c netfilter: nf_tables: add missing ->release_ops() in error path of newrule() 
->release_ops() callback releases resources and this is used in error path.
If nf_tables_newrule() fails after ->select_ops(), it should release
resources. but it can not call ->destroy() because that should be called
after ->init().
At this point, ->release_ops() should be used for releasing resources.

Test commands:
   modprobe -rv xt_tcpudp
   iptables-nft -I INPUT -m tcp   <-- error command
   lsmod

Result:
   Module                  Size  Used by
   xt_tcpudp              20480  2      <-- it should be 0

Fixes: b8e2040063 ("netfilter: nft_compat: use .release_ops and remove list of extension")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
 2019-03-20 08:32:58 +01:00
Thomas Zimmermann c2d3115538 drm/vmwgfx: Don't double-free the mode stored in par->set_mode 
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd
twice. The first free is in vmw_fb_kms_detach(), the second is near the
end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code
only works correctly if the mode doesn't actually change. Removing
'old_mode' in favor of using par->set_mode directly fixes the problem.

Cc: <stable@vger.kernel.org>
Fixes: a278724aa2 ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
 2019-03-20 07:57:01 +01:00
Deepak Rawat 4b9ce3a651 drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's 
If it's not a system error and get_node implementation accommodate the
buffer object then it should return 0 with memm::mm_node set to NULL.

v2: Test for id != -ENOMEM instead of id == -ENOSPC.

Cc: <stable@vger.kernel.org>
Fixes: 4eb085e42f ("drm/vmwgfx: Convert to new IDA API")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
 2019-03-20 07:53:29 +01:00
Vinay K Nallamothu f84532ce58 mpls: Fix 6PE forwarding 
This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6
nexthop to connect IPv6 islands over IPv4 only MPLS network core.

Prior to this fix, to find the link-layer destination mac address, 6PE
enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6
nexthop address over the interface facing the IPv4 only core which
wouldn't success as the core is IPv6 free.

This fix changes that behavior on 6PE host to treat the nexthop as IPv4
address and send ARP requests whenever the next-hop address is an
IPv4-mapped IPv6 address.

Below topology illustrates the issue and how the patch addresses it.

abcd::1.1.1.1 (lo)                                              abcd::2.2.2.2 (lo)
R0 (PE/host)------------------------R1--------------------------------R2 (PE/host)
            <--- IPv4 MPLS core --->   <------ IPv4 MPLS core -------->
           eth1               eth2       eth3                       eth4
          172.18.0.10     172.18.0.11   172.19.0.11              172.19.0.12
    ffff::172.18.0.10                                      ffff::172.19.0.12
            <------------------IPv6 MPLS tunnel ---------------------->

R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels
between R0,R1 and R1,R2.

 docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1
 docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4

 docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3
 docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2

With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2,
using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for
172.18.18.0.11.

Signed-off-by: Vinay K Nallamothu <nvinay@juniper.net>
Tested-by: Avinash Lingala <ar977m@att.com>
Tested-by: Aravind Srinivas Srinivasa Prabhakar <aprabh@juniper.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 16:00:22 -07:00
Arnd Bergmann fb6fafbc7d 3c515: fix integer overflow warning 
clang points out a harmless signed integer overflow:

drivers/net/ethernet/3com/3c515.c:1530:66: error: implicit conversion from 'int' to 'short' changes value from 32783 to -32753 [-Werror,-Wconstant-conversion]
                new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
                         ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~
drivers/net/ethernet/3com/3c515.c:1532:52: error: implicit conversion from 'int' to 'short' changes value from 32775 to -32761 [-Werror,-Wconstant-conversion]
                new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
                         ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
drivers/net/ethernet/3com/3c515.c:1534:38: error: implicit conversion from 'int' to 'short' changes value from 32773 to -32763 [-Werror,-Wconstant-conversion]
                new_mode = SetRxFilter | RxStation | RxBroadcast;
                         ~ ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~

Make the variable unsigned to avoid the overflow.

Fixes: Linux-2.1.128pre1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 15:07:49 -07:00
Jiada Wang 2071ac985d PM / Domains: Avoid a potential deadlock 
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock
the deadlock scenario is like following:
First thread is probing cs2000
cs2000_probe()
  clk_register()
    __clk_core_init()
      clk_prepare_lock()                            ----> acquires prepare_lock
        cs2000_recalc_rate()
          i2c_smbus_read_byte_data()
            rcar_i2c_master_xfer()
              dma_request_chan()
                rcar_dmac_of_xlate()
                  rcar_dmac_alloc_chan_resources()
                    pm_runtime_get_sync()
                      __pm_runtime_resume()
                        rpm_resume()
                          rpm_callback()
                            genpd_runtime_resume()   ----> acquires genpd->mlock

Second thread is attaching any device to the same PM domain
genpd_add_device()
  genpd_lock()                                       ----> acquires genpd->mlock
    cpg_mssr_attach_dev()
      of_clk_get_from_provider()
        __of_clk_get_from_provider()
          __clk_create_clk()
            clk_prepare_lock()                       ----> acquires prepare_lock

Since currently no PM provider access genpd's critical section
in .attach_dev, and .detach_dev callbacks, so there is no need to protect
these two callbacks with genpd->mlock.
This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev
from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired
in .attach_dev and .detach_dev

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2019-03-19 22:58:04 +01:00
Andy Shevchenko 54e3aca84e ACPI / utils: Drop reference in test for device presence 
When commit 8661423eea ("ACPI / utils: Add new acpi_dev_present
helper") introduced acpi_dev_present(), it missed the fact that
bus_find_device() took a reference on the device found by it and
the callers of acpi_dev_present() don't drop that reference.

Drop the reference on the device in acpi_dev_present().

Fixes: 8661423eea ("ACPI / utils: Add new acpi_dev_present helper")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2019-03-19 22:34:21 +01:00
Eric Dumazet e0aa67709f dccp: do not use ipv6 header for ipv4 flow 
When a dual stack dccp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or
inet6_iif() helper.

Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 14:01:40 -07:00
Eric Dumazet 89e4130939 tcp: do not use ipv6 header for ipv4 flow 
When a dual stack tcp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or tcp_v6_iif() helper.

Fixes: 1397ed35f2 ("ipv6: add flowinfo for tcp6 pkt_options for all cases")
Fixes: df3687ffc6 ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 14:00:27 -07:00
Aditya Pakki d7737d4257 nfc: Fix to check for kmemdup failure 
In case of kmemdup failure while setting the service name the patch
returns -ENOMEM upstream for processing.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 13:48:07 -07:00
YueHaibing a3e23f719f net-sysfs: call dev_hold if kobject_init_and_add success 
In netdev_queue_add_kobject and rx_queue_add_kobject,
if sysfs_create_group failed, kobject_put will call
netdev_queue_release to decrease dev refcont, however
dev_hold has not be called. So we will see this while
unregistering dev:

unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d0d6683716 ("net: don't decrement kobj reference count on init failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 13:45:58 -07:00
Aaro Koskinen 223a960c01 net: stmmac: fix memory corruption with large MTUs 
When using 16K DMA buffers and ring mode, the DES3 refill is not working
correctly as the function is using a bogus pointer for checking the
private data. As a result stale pointers will remain in the RX descriptor
ring, so DMA will now likely overwrite/corrupt some already freed memory.

As simple reproducer, just receive some UDP traffic:

	# ifconfig eth0 down; ifconfig eth0 mtu 9000; ifconfig eth0 up
	# iperf3 -c 192.168.253.40 -u -b 0 -R

If you didn't crash by now check the RX descriptors to find non-contiguous
RX buffers:

	cat /sys/kernel/debug/stmmaceth/eth0/descriptors_status
	[...]
	1 [0x2be5020]: 0xa3220321 0x9ffc1ffc 0x72d70082 0x130e207e
					     ^^^^^^^^^^^^^^^^^^^^^
	2 [0x2be5040]: 0xa3220321 0x9ffc1ffc 0x72998082 0x1311a07e
					     ^^^^^^^^^^^^^^^^^^^^^

A simple ping test will now report bad data:

	# ping -s 8200 192.168.253.40
	PING 192.168.253.40 (192.168.253.40) 8200(8228) bytes of data.
	8208 bytes from 192.168.253.40: icmp_seq=1 ttl=64 time=1.00 ms
	wrong data byte #8144 should be 0xd0 but was 0x88

Fix the wrong pointer. Also we must refill DES3 only if the DMA buffer
size is 16K.

Fixes: 54139cf3bb ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 13:30:30 -07:00
Arnd Bergmann 7442c483b9 mlxsw: core: mlxsw: core: avoid -Wint-in-bool-context warning 
A recently added function in mlxsw triggers a harmless compiler warning:

In file included from drivers/net/ethernet/mellanox/mlxsw/core.h:17,
                 from drivers/net/ethernet/mellanox/mlxsw/core_env.c:7:
drivers/net/ethernet/mellanox/mlxsw/core_env.c: In function 'mlxsw_env_module_temp_thresholds_get':
drivers/net/ethernet/mellanox/mlxsw/reg.h:8015:45: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
 #define MLXSW_REG_MTMP_TEMP_TO_MC(val) (val * 125)
                                        ~~~~~^~~~~~
drivers/net/ethernet/mellanox/mlxsw/core_env.c:116:8: note: in expansion of macro 'MLXSW_REG_MTMP_TEMP_TO_MC'
   if (!MLXSW_REG_MTMP_TEMP_TO_MC(module_temp)) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~

The warning is normally disabled, but it would be nice to enable
it to find real bugs, and there are no other known instances at
the moment.

Replace the negation with a zero-comparison, which also matches
the comment above it.

Fixes: d93c19a1d9 ("mlxsw: core: Add API for QSFP module temperature thresholds reading")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-03-19 13:26:03 -07:00
Florian Fainelli 9c05d4c33d This pull request brings in a fix for detecting HDMI on the Pi B rev 2. 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE/JuuFDWp9/ZkuCBXtdYpNtH8nugFAlx9u1IACgkQtdYpNtH8
 nuj4GQ/+PD3lP/InAK2+k/Fhas2IA+YjPIC+fbv6lZ1XA/DEXucK0k8RWQCp/vr3
 cvHEB3QBmNyHDUJEKafHrozXzheI08OBWw/XbSarJb++dYz+AK+7bVucqLO8nRpU
 E7J/onHXpubcaWyw3Bt6e28WeOuK8LAZEqDsMtlge2B4ffAeCkQ2QQXd8ypkEIhg
 00L0naqptigKXeDYdm40L/pko4NSNMrV98spLBn+Xe2dB+BcIRv9ZdwtCuZCnAKx
 pxGL0JNdXINRlvj+ySmu5WdkqRDfYF4b2voV7pSE36RTPeLKQAGaAOIEjrBnSYqj
 rQ3FABCNSu6DsEjVewO1KRA83pN0+KyE+GcAmz4xhPMgEbFlgT9tbj3E5a09Go/z
 qtH5HzB/K1kqcZqFBY9P1YFw7/0pRdzVl0J1qD2ACinTC8IghKCpOzcVENWraT1z
 XyVHJdkmH5VwBdkNSPf5V071v20zXVK8uNe+1l7bvaXInGTF/HqFfNXrf1QGnrtX
 38HoNJ3wx8WjCSkJANz6GDpVSC8Z6VWmkW09IoZrzR+gHxqdzUDU0fbCoPuI/oAa
 TxwCEMWOqw0SYuly7Xd+jl4o0elG9lpefEYEHEcN2iku57aP8c1MTBxpo5RUpE2O
 FafXCQgVJSXPmw+rnFN2Ci+4h56f4pATWI/6W/R43JgCxWbl4t4=
 =LnIu
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlyRTcAACgkQh9CWnEQH
 BwTEaQ/+Plj1UZErYBoIhNiRLhwPh3rvD59H3ruflF8MdZueicyFAtNmJy4B0TBx
 GLKj0xrQ/EORe8MJzHPUc5Itz832w1+HKqbVCS+uDzIgsYbQPeTs11d2Q8WhQj0C
 VtzRd74w3N6UYW+Wq2OHwftzU/7YHUhBT2OFhALUqgfCXRyYZfWbE0HgW1nNWEiJ
 yczaakmU9y6fh6dAp+cdFjZoSRhAKL/9WVOltxsUNbiQHR4SLA1v21U9BHFC0sXf
 rzI725k2bTJsweHy/3QuDwZKBbG4dmcAHhq1f8N8ycjHM5iJ3Y+ASIFJMk3CVuhM
 0tH6lTwQfqzGYvIT9e1l5JYaaVYj34ypFP6hR7hqW7Lr34YU3I6+tn5luhW46Snz
 1xi/zjFqeQyPDa+jlfNJhtUV8uvmDtoX1p6viyySE2AEfmLh2isf0oLE8MEpwH4q
 /sSR6l0itw9D4Pbb9eMqx3Bqpc0UmTy/zQvA/eaHqUOtL117nrxeMme0mA/82Ms/
 TM1dt+RSSzmAvoz/vY0CQCuyyItYQxk89mi2aOQBnbp5PotYBazmoMv57CJf6CVK
 RrGgGmpkKWC8N3h0mwnQ7WP4rk7n7x5i9W0/bhngqx4ZmJI318PmMVJb2YWasQJC
 eYpNr3rBH/BH3kuRFX0FjPkHdzNvYOVhil6VkaCtFoAGIcxrDNQ=
 =n/bC
 -----END PGP SIGNATURE-----

Merge tag 'tags/bcm2835-dt-next-2019-03-04' into devicetree/fixes

This pull request brings in a fix for detecting HDMI on the Pi B rev 2.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2019-03-19 13:14:32 -07:00
Song Liu 3ca3877a97 perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation 
This patch adds processing of PERF_BPF_EVENT_PROG_LOAD, which sets
proper DSO type/id/etc of memory regions mapped to BPF programs to
DSO_BINARY_TYPE__BPF_PROG_INFO.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-14-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:07 -03:00
Song Liu 9b86d04d53 perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO 
Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In
symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new
function symbol__disassemble_bpf() in an upcoming patch, where annotation line
information is filled based bpf_prog_info and btf saved in given perf_env.

Committer notes:

Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso',
to fix this bug when exiting 'perf top':

  # perf top
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x5a785a]
  /lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf]
  perf(rb_first+0x2b)[0x4d6eeb]
  perf(dso__delete+0xb7)[0x4dffb7]
  perf[0x4f9e37]
  perf(perf_session__delete+0x64)[0x504df4]
  perf(cmd_top+0x1957)[0x454467]
  perf[0x4aad18]
  perf(main+0x61c)[0x42ec7c]
  /lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412]
  perf(_start+0x2d)[0x42eead]
  #
  # addr2line -fe ~/bin/perf 0x4dffb7
  dso_cache__free
  /home/acme/git/perf/tools/perf/util/dso.c:713

That is trying to access the dso->data.cache, and that is not used with
BPF programs, so we end up accessing what is in bpf_prog.first_member,
b00m.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:07 -03:00
Song Liu 31be9478ed perf feature detection: Add -lopcodes to feature-libbfd 
Both libbfd and libopcodes are distributed with binutil-dev/devel. When
libbfd is present, it is OK to assume that libopcodes also present. This
has been a safe assumption for bpftool.

This patch adds -lopcodes to perf/Makefile.config. libopcodes will be
used in the next commit for BPF annotation.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-12-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:07 -03:00
Song Liu ee7a112fbc perf top: Add option --no-bpf-event 
This patch adds option --no-bpf-event to 'perf top', which is the same
as the option of 'perf record'.

The following patches will use this option.

Committer testing:

  # perf top -vv 2> /tmp/perf_event_attr.out
  # cat  /tmp/perf_event_attr.out
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|CPU|PERIOD
    read_format                      ID
    disabled                         1
    inherit                          1
    mmap                             1
    comm                             1
    freq                             1
    task                             1
    precise_ip                       3
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
    ksymbol                          1
    bpf_event                        1
  ------------------------------------------------------------
  #

After this patch:

  # perf top --no-bpf-event -vv 2> /tmp/perf_event_attr.out
  # cat  /tmp/perf_event_attr.out
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|CPU|PERIOD
    read_format                      ID
    disabled                         1
    inherit                          1
    mmap                             1
    comm                             1
    freq                             1
    task                             1
    precise_ip                       3
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
    ksymbol                          1
  ------------------------------------------------------------
  #

Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-11-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:07 -03:00
Song Liu a70a112317 perf bpf: Save BTF information as headers to perf.data 
This patch enables 'perf record' to save BTF information as headers to
perf.data.

A new header type HEADER_BPF_BTF is introduced for this data.

Committer testing:

As root, being on the kernel sources top level directory, run:

    # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg

Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).

Make sure you have a recent enough clang, say version 9, to get the
BTF ELF sections needed for this testing:

  # clang --version | head -1
  clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500)
  # readelf -SW tools/perf/examples/bpf/augmented_raw_syscalls.o | grep BTF
    [22] .BTF              PROGBITS        0000000000000000 000ede 000b0e 00      0   0  1
    [23] .BTF.ext          PROGBITS        0000000000000000 0019ec 0002a0 00      0   0  1
    [24] .rel.BTF.ext      REL             0000000000000000 002fa8 000270 10     30  23  8

Then do a systemwide perf record session for a few seconds:

  # perf record -a sleep 2s

Then look at:

  # perf report --header-only | grep b[pt]f
  # event : name = cycles:ppp, , id = { 1116204, 1116205, 1116206, 1116207, 1116208, 1116209, 1116210, 1116211 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 51
  # bpf_prog_info of id 52
  # btf info of id 8
  #

We need to show more info about these BPF and BTF entries , but that can
be done later.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-10-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:07 -03:00
Song Liu 3792cb2ff4 perf bpf: Save BTF in a rbtree in perf_env 
BTF contains information necessary to annotate BPF programs. This patch
saves BTF for BPF programs loaded in the system.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-9-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:07 -03:00
Song Liu 606f972b13 perf bpf: Save bpf_prog_info information as headers to perf.data 
This patch enables perf-record to save bpf_prog_info information as
headers to perf.data. A new header type HEADER_BPF_PROG_INFO is
introduced for this data.

Committer testing:

As root, being on the kernel sources top level directory, run:

  # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg

Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).

Then do a systemwide perf record session for a few seconds:

  # perf record -a sleep 2s

Then look at:

  # perf report --header-only | grep -i bpf
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 208
  # bpf_prog_info of id 209
  #

We need to show more info about these programs, like bpftool does for
the ones running on the system, i.e. 'perf record/perf report' become a
way of saving the BPF state in a machine to then analyse on another,
together with all the other information that is already saved in the
perf.data header:

  # perf report --header-only
  # ========
  # captured on    : Tue Mar 12 11:42:13 2019
  # header version : 1
  # data offset    : 296
  # data size      : 16294184
  # feat offset    : 16294480
  # hostname : quaco
  # os release : 5.0.0+
  # perf version : 5.0.gd783c8
  # arch : x86_64
  # nrcpus online : 8
  # nrcpus avail : 8
  # cpudesc : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
  # cpuid : GenuineIntel,6,142,10
  # total memory : 24555720 kB
  # cmdline : /home/acme/bin/perf (deleted) record -a
  # event : name = cycles:ppp, , id = { 3190123, 3190124, 3190125, 3190126, 3190127, 3190128, 3190129, 3190130 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1
  # CPU_TOPOLOGY info available, use -I to display
  # NUMA_TOPOLOGY info available, use -I to display
  # pmu mappings: intel_pt = 8, software = 1, power = 11, uprobe = 7, uncore_imc = 12, cpu = 4, cstate_core = 18, uncore_cbox_2 = 15, breakpoint = 5, uncore_cbox_0 = 13, tracepoint = 2, cstate_pkg = 19, uncore_arb = 17, kprobe = 6, i915 = 10, msr = 9, uncore_cbox_3 = 16, uncore_cbox_1 = 14
  # CACHE info available, use -I to display
  # time of first sample : 116392.441701
  # time of last sample : 116400.932584
  # sample duration :   8490.883 ms
  # MEM_TOPOLOGY info available, use -I to display
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 208
  # bpf_prog_info of id 209
  # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT
  # ========
  #

Committer notes:

We can't use the libbpf unconditionally, as the build may have been with
NO_LIBBPF, when we end up with linking errors, so provide dummy
{process,write}_bpf_prog_info() wrapped by HAVE_LIBBPF_SUPPORT for that
case.

Printing are not affected by this, so can continue as is.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-8-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Song Liu e4378f0cb9 perf bpf: Save bpf_prog_info in a rbtree in perf_env 
bpf_prog_info contains information necessary to annotate bpf programs.

This patch saves bpf_prog_info for bpf programs loaded in the system.

Some big picture of the next few patches:

To fully annotate BPF programs with source code mapping, 4 different
informations are needed:

    1) PERF_RECORD_KSYMBOL
    2) PERF_RECORD_BPF_EVENT
    3) bpf_prog_info
    4) btf

Before this set, 1) and 2) in the list are already saved to perf.data
file. For BPF programs that are already loaded before perf run, 1) and 2)
are synthesized by perf_event__synthesize_bpf_events(). For short living
BPF programs, 1) and 2) are generated by kernel.

This set handles 3) and 4) from the list. Again, it is necessary to handle
existing BPF program and short living program separately.

This patch handles 3) for exising BPF programs while synthesizing 1) and
2) in perf_event__synthesize_bpf_events(). These data are stored in
perf_env. The next patch saves these data from perf_env to perf.data as
headers.

Similarly, the two patches after the next saves 4) of existing BPF
programs to perf_env and perf.data.

Another patch later will handle 3) and 4) for short living BPF programs
by monitoring 1) and 2) in a dedicate thread.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com
[ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Song Liu e541695045 perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool 
This patch changes the arguments of perf_event__synthesize_bpf_events()
to include perf_session* instead of perf_tool*. perf_session will be
used in the next patch.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-6-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Song Liu a742258af1 perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear() 
With bpf_program__get_prog_info_linear, we can simplify the logic that
synthesizes bpf events.

This patch doesn't change the behavior of the code.

Commiter notes:

Needed this (for all four variables), suggested by Song, to overcome
build failure on debian experimental cross building to MIPS 32-bit:

  -               u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
  +               u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(uintptr_t)(info->prog_tags);

  util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog':
  util/bpf-event.c:143:35: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
                                     ^
  util/bpf-event.c:144:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     __u32 *prog_lens = (__u32 *)(info->jited_func_lens);
                        ^
  util/bpf-event.c:145:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     __u64 *prog_addrs = (__u64 *)(info->jited_ksyms);
                         ^
  util/bpf-event.c:146:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     void *func_infos = (void *)(info->func_info);
                        ^
  cc1: all warnings being treated as errors

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-5-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Song Liu cae73f2339 bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump() 
This patches uses bpf_program__get_prog_info_linear() to simplify the
logic in prog.c do_dump().

Committer testing:

Before:

  # bpftool prog dump xlated id 208 > /tmp/dump.xlated.before
  # bpftool prog dump jited id 208 > /tmp/dump.jited.before
  # bpftool map dump id 107 > /tmp/map.dump.before

After:

  # ~acme/git/perf/tools/bpf/bpftool/bpftool map dump id 107 > /tmp/map.dump.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 > /tmp/dump.xlated.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump jited id 208 > /tmp/dump.jited.after
  # diff -u /tmp/dump.xlated.before /tmp/dump.xlated.after
  # diff -u /tmp/dump.jited.before /tmp/dump.jited.after
  # diff -u /tmp/map.dump.before /tmp/map.dump.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208
     0: (bf) r6 = r1
     1: (85) call bpf_get_current_pid_tgid#80800
     2: (63) *(u32 *)(r10 -328) = r0
     3: (bf) r2 = r10
     4: (07) r2 += -328
     5: (18) r1 = map[id:107]
     7: (85) call __htab_map_lookup_elem#85680
     8: (15) if r0 == 0x0 goto pc+1
     9: (07) r0 += 56
    10: (b7) r7 = 0
    11: (55) if r0 != 0x0 goto pc+52
    12: (bf) r1 = r10
    13: (07) r1 += -328
    14: (b7) r2 = 64
    15: (bf) r3 = r6
    16: (85) call bpf_probe_read#-46848
    17: (bf) r2 = r10
    18: (07) r2 += -320
    19: (18) r1 = map[id:106]
    21: (07) r1 += 208
    22: (61) r0 = *(u32 *)(r2 +0)
    23: (35) if r0 >= 0x200 goto pc+3
    24: (67) r0 <<= 3
    25: (0f) r0 += r1
    26: (05) goto pc+1
    27: (b7) r0 = 0
    28: (15) if r0 == 0x0 goto pc+35
    29: (71) r1 = *(u8 *)(r0 +0)
    30: (15) if r1 == 0x0 goto pc+33
    31: (b7) r5 = 64
    32: (79) r1 = *(u64 *)(r10 -320)
    33: (15) if r1 == 0x2 goto pc+2
    34: (15) if r1 == 0x101 goto pc+3
    35: (55) if r1 != 0x15 goto pc+19
    36: (79) r3 = *(u64 *)(r6 +16)
    37: (05) goto pc+1
    38: (79) r3 = *(u64 *)(r6 +24)
    39: (15) if r3 == 0x0 goto pc+15
    40: (b7) r1 = 0
    41: (63) *(u32 *)(r10 -260) = r1
    42: (bf) r1 = r10
    43: (07) r1 += -256
    44: (b7) r2 = 256
    45: (85) call bpf_probe_read_str#-46704
    46: (b7) r5 = 328
    47: (63) *(u32 *)(r10 -264) = r0
    48: (bf) r1 = r0
    49: (67) r1 <<= 32
    50: (77) r1 >>= 32
    51: (25) if r1 > 0xff goto pc+3
    52: (07) r0 += 72
    53: (57) r0 &= 255
    54: (bf) r5 = r0
    55: (bf) r4 = r10
    56: (07) r4 += -328
    57: (bf) r1 = r6
    58: (18) r2 = map[id:105]
    60: (18) r3 = 0xffffffff
    62: (85) call bpf_perf_event_output_tp#-45104
    63: (bf) r7 = r0
    64: (bf) r0 = r7
    65: (95) exit
  #

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Song Liu 34be16466d tools lib bpf: Introduce bpf_program__get_prog_info_linear() 
Currently, bpf_prog_info includes 9 arrays. The user has the option to
fetch any combination of these arrays. However, this requires a lot of
handling.

This work becomes more tricky when we need to store bpf_prog_info to a
file, because these arrays are allocated independently.

This patch introduces 'struct bpf_prog_info_linear', which stores arrays
of bpf_prog_info in continuous memory.

Helper functions are introduced to unify the work to get different sets
of bpf_prog_info.  Specifically, bpf_program__get_prog_info_linear()
allows the user to select which arrays to fetch, and handles details for
the user.

Please see the comments right before 'enum bpf_prog_info_array' for more
details and examples.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lkml.kernel.org/r/ce92c091-e80d-a0c1-4aa0-987706c42b20@iogearbox.net
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Song Liu 71184c6ab7 perf record: Replace option --bpf-event with --no-bpf-event 
Currently, monitoring of BPF programs through bpf_event is off by
default for 'perf record'.

To turn it on, the user need to use option "--bpf-event".  As BPF gets
wider adoption in different subsystems, this option becomes
inconvenient.

This patch makes bpf_event on by default, and adds option "--no-bpf-event"
to turn it off. Since option --bpf-event is not released yet, it is safe
to remove it.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Changbin Du d982b33133 perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test() 
=================================================================
  ==20875==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 1160 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x55bd50005599 in zalloc util/util.h:23
      #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
      #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
      #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
      #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
      #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
      #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
      #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
      #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 19 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 6a6cd11d4e ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:06 -03:00
Changbin Du f97a8991d3 perf tests: Fix memory leak by expr__find_other() in test__expr() 
=================================================================
  ==7506==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 13 byte(s) in 3 object(s) allocated from:
      #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
      #1 0x5625e53aaef0 in expr__find_other util/expr.y:221
      #2 0x5625e51bcd3f in test__expr tests/expr.c:52
      #3 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #6 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 075167363f ("perf tools: Add a simple expression parser for JSON")
Link: http://lkml.kernel.org/r/20190316080556.3075-16-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:05 -03:00
Changbin Du 93faa52e83 perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test 
=================================================================
  ==7497==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45
      #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103
      #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120
      #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135
      #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36
      #6 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #9 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: f30a79b012 ("perf tools: Add reference counting for cpu_map object")
Link: http://lkml.kernel.org/r/20190316080556.3075-15-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:05 -03:00
Arnaldo Carvalho de Melo 42dfa451d8 perf evsel: Free evsel->counts in perf_evsel__exit() 
Using gcc's ASan, Changbin reports:

  =================================================================
  ==7494==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 48 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e5330a5e in zalloc util/util.h:23
      #2 0x5625e5330a9b in perf_counts__new util/counts.c:10
      #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      #7 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #10 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 72 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e532560d in zalloc util/util.h:23
      #2 0x5625e532566b in xyarray__new util/xyarray.c:10
      #3 0x5625e5330aba in perf_counts__new util/counts.c:15
      #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      #8 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #11 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

His patch took care of evsel->prev_raw_counts, but the above backtraces
are about evsel->counts, so fix that instead.

Reported-by: Changbin Du <changbin.du@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/n/tip-hd1x13g59f0nuhe4anxhsmfp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:05 -03:00
Changbin Du 1e5b0cf867 perf top: Fix global-buffer-overflow issue 
The array str[] should have six elements.

  =================================================================
  ==4322==ERROR: AddressSanitizer: global-buffer-overflow on address 0x56463844e300 at pc 0x564637e7ad0d bp 0x7f30c8c89d10 sp 0x7f30c8c89d00
  READ of size 8 at 0x56463844e300 thread T9
      #0 0x564637e7ad0c in __ordered_events__flush util/ordered-events.c:316
      #1 0x564637e7b0e4 in ordered_events__flush util/ordered-events.c:338
      #2 0x564637c6a57d in process_thread /home/changbin/work/linux/tools/perf/builtin-top.c:1073
      #3 0x7f30d173a163 in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x8163)
      #4 0x7f30cfffbdee in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x11adee)

  0x56463844e300 is located 32 bytes to the left of global variable 'flags' defined in 'util/trace-event-parse.c:229:26' (0x56463844e320) of size 192
  0x56463844e300 is located 0 bytes to the right of global variable 'str' defined in 'util/ordered-events.c:268:28' (0x56463844e2e0) of size 32
  SUMMARY: AddressSanitizer: global-buffer-overflow util/ordered-events.c:316 in __ordered_events__flush
  Shadow bytes around the buggy address:
    0x0ac947081c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c50: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00
  =>0x0ac947081c60:[f9]f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c70: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
    0x0ac947081c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:       fa
    Freed heap region:       fd
    Stack left redzone:      f1
    Stack mid redzone:       f2
    Stack right redzone:     f3
    Stack after return:      f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:       f6
    Poisoned by user:        f7
    Container overflow:      fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
  Thread T9 created by T0 here:
      #0 0x7f30d179de5f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x4ae5f)
      #1 0x564637c6b954 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1253
      #2 0x564637c7173c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642
      #3 0x564637d85038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #4 0x564637d85577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #5 0x564637d8597b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #6 0x564637d860e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #7 0x7f30cff0509a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 16c66bc167 ("perf top: Add processing thread")
Fixes: 68ca5d07de ("perf ordered_events: Add ordered_events__flush_time interface")
Link: http://lkml.kernel.org/r/20190316080556.3075-13-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:05 -03:00
Changbin Du da3a53a739 perf maps: Purge all maps from the 'names' tree 
Add function __maps__purge_names() to purge all maps from the names
tree.  We need to cleanup the names tree in maps__exit().

Detected with gcc's ASan.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 1e6285699b ("perf symbols: Fix slowness due to -ffunction-section")
Link: http://lkml.kernel.org/r/20190316080556.3075-12-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2019-03-19 16:52:05 -03:00