The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.
Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are few issues with validation of netdevice and listen id lookup
for IB (IPoIB) while processing incoming CM request as below.
1. While performing lookup of bind_list in cma_ps_find(), net namespace
of the netdevice can get deleted in cma_exit_net(), resulting in use
after free access of idr and/or net namespace structures.
This lookup occurs from the workqueue context (and not userspace
context where net namespace is always valid).
CPU0 CPU1
==== ====
bind_list = cma_ps_find();
move netdevice to new namespace
delete net namespace
cma_exit_net()
idr_destroy(idr);
[..]
cma_find_listener(bind_list, ..);
2. While netdevice is validated for IP address in given net namespace,
netdevice's net namespace and/or ifindex can change in
cma_get_net_dev() and cma_match_net_dev().
Above issues are overcome by using rcu lock along with netdevice
UP/DOWN state as described below.
When a net namespace is getting deleted, netdevice is closed and
shutdown before moving it back to init_net namespace.
change_net_namespace() synchronizes with any existing use of netdevice
before changing the netdev properties such as net or ifindex.
Once netdevice IFF_UP flags is cleared, such fields are not guaranteed
to be valid.
Therefore, rcu lock along with netdevice state check ensures that,
while route lookup and cm_id lookup is in progress, netdevice of
interest won't migrate to any other net namespace.
This ensures that associated net namespace of netdevice won't get
deleted while rcu lock is held for netdevice which is in IFF_UP state.
Fixes: fa20105e09 ("IB/cma: Add support for network namespaces")
Fixes: 4be74b42a6 ("IB/cma: Separate port allocation to network namespaces")
Fixes: f887f2ac87 ("IB/cma: Validate routing of incoming requests")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, if a method contained mandatory attributes in a namespace
that wasn't given by the user, these attributes weren't validated.
Fixing this by iterating over all specification namespaces.
Fixes: fac9658cab ("IB/core: Add new ioctl interface")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The c4iw_rdev_close() logic was not releasing all the hw
resources (PBL and RQT memory) during the device removal
event (driver unload / system reboot). This can cause panic
in gen_pool_destroy().
The module remove function will wait for all the hw
resources to be released during the device removal event.
Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref)
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow INFINIBAND without INFINIBAND_ADDR_TRANS because fuzzing has been
finding fair number of CM bugs. So provide option to disable it.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency. This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Starting from commit 72f36be061 ("net/mlx5: Fix mlx5_get_uars_page to
return error code") the mlx5_get_uars_page() call returns error in case
of failure, but it was mistakenly overlooked in the merge commit.
Fixes: e7996a9a77 ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git")
Reported-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In commit bcf87f1dbb ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
incorrectly mapped primary device's netdevice to 2nd port netdevice.
It always represented primary port's netdevice for 2nd port netdevice
when ib representors were not used.
This results into failing to process CM request arriving on 2nd port due
to incorrect mapping of netdevice.
This fix corrects it by considering the right mdev.
Cc: <stable@vger.kernel.org> # 4.16
Fixes: bcf87f1dbb ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Failure in rereg MR releases UMEM but leaves the MR to be destroyed
by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and
hit "NULL-ptr deref or user memory access" errors.
Ensure that rereg MR is only performed on a non-dead MR.
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes: 395a8e4c32 ("IB/mlx5: Refactoring register MR code")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before [1], When MAC address of the netdevice is changed, default GID is
supposed to get deleted and added back which affects the node and/or port
GUID in below sequence.
netdevice_event()
-> NETDEV_CHANGEADDR
default_del_cmd()
del_netdev_default_ips()
bond_delete_netdev_default_gids()
ib_cache_gid_set_default_gid()
ib_cache_gid_del()
add_cmd()
[..]
However, ib_cache_gid_del() was not getting invoked in non bonding
scenarios because event_ndev and rdma_ndev are same.
Therefore, fix such condition to ignore checking upper device when event
ndev and rdma_dev are same; similar to bond_set_netdev_default_gids().
Which this fix ib_cache_gid_del() is invoked correctly; however
ib_cache_gid_del() doesn't find the default GID for deletion because
find_gid() was given default_gid = false with
GID_ATTR_FIND_MASK_DEFAULT set.
But it was getting overwritten by ib_cache_gid_set_default_gid() later
on as part of add_cmd().
Therefore, mac address change used to work for default GID.
With refactor series [1], this incorrect behavior is detected.
Therefore,
when deleting default GID, set default_gid and set MASK flag.
when deleting IP based GID, clear default_gid and set MASK flag.
[1] https://patchwork.kernel.org/patch/10319151/
Fixes: 238fdf48f2 ("IB/core: Add RoCE table bonding support")
Fixes: 598ff6bae6 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When IPv6 link local address is removed, if it matches with the default
GID, default GID(s)s gets removed which may not be a desired behavior.
This behavior is introduced by refactor work in Fixes tag.
When IPv6 link address is removed, removing its equivalent RoCEv2 GID
which exactly matches with default RoCEv2 GID, is right thing to do.
However achieving it correctly requires lot more changes, likely in
roce_gid_mgmt.c and core/cache.c. This should be done as independent
patch.
Therefore, this patch preserves behavior of not deleteing default GIDs.
This is done by providing explicit hint to consider default GID property
using mask and default_gid; similar to add_gid().
Fixes: 598ff6bae6 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Default GIDs are marked reserved at the start of the GID table at index
0 and 1 by gid_table_reserve_default(). Currently when default GID is
requested, it can still allocates an empty slot which was not marked as
RESERVED for default GID, which is incorrect.
At least in current code flow of roce_gid_mgmt.c, in theory we can
still request to allocate more than one/two default GIDs depending
on how upper devices are setup.
Therefore, it is better for cache layer to only allow our reserved slots
to be used by default GID allocation requests.
Fixes: 598ff6bae6 ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address(). Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command. Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.
Fix this by explicitly allowing a zero address family for the source.
Fixes: 2975d5de64 ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is done by auditing all callers of ucma_get_ctx and switching the
ones that unconditionally touch ->device to ucma_get_ctx_dev. This covers
a little less than half of the call sites.
The 11 remaining call sites to ucma_get_ctx() were manually audited.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With gcc-4.1.2:
drivers/infiniband/core/uverbs_std_types_flow_action.c:366: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: missing braces around initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>.<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘min_len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: error: unknown field ‘flags’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:376: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: missing braces around initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>.<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:383: error: unknown field ‘ptr’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:384: error: unknown field ‘type’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘min_len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘len’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: error: unknown field ‘flags’ specified in initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: excess elements in union initializer
drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
Add the missing braces to fix this.
Fixes: 2eb9beaee5 ("IB/uverbs: Add flow_action create and destroy verbs")
Fixes: 7d12f8d5a1 ("IB/uverbs: Add modify ESP flow_action")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y.
The build error occurs when the mlx5 driver code attempts to use
USER_ACCESS interfaces, which are built as a loadable module.
Fixes these build errors:
drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects'
../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree'
drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'
Build-tested with multiple config combinations.
Fixes: 8c84660bb4 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs")
Cc: stable@vger.kernel.org # reported against 4.16
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The header file fs_helpers.h is included twice. So it should be removed.
Fixes: 802c212568 ("IB/mlx5: Add IPsec support for egress and ingress")
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Validating input parameters should be done before getting the cm_id
otherwise it can leak a cm_id reference.
Fixes: 6a21dfc0d0 ("RDMA/ucma: Limit possible option size")
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
Adding mlx5_ib driver implementation for reg_dm_mr callback
which allows registering device memory (DM) as an MR for
local and remote access.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change updates the mlx5 interface to create mkey
on the device.
The updates in the command mailbox include increasing the
access mode type field to 5 bits in order to support additional
types such as MLX5_MKC_ACCESS_MODE_MEMIC which represents device
memory access type and will be used when registering MR on allocated
device memory.
All the places that use the old access mode format are adjusted as
well.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the mlx5_ib driver implementation for the device
memory allocation API.
It implements the ib_device callbacks for allocation and deallocation
operations as well as a new mmap command support which allows mapping
an allocated device memory to a VMA.
The change also adds reporting of device memory maximum size and
alignment parameters reported in device capabilities.
The allocation/deallocation operations are using new firmware
commands to allocate MEMIC memory on the device.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding new ioctl method for the MR object - REG_DM_MR.
This command can be used by users to register an allocated
device memory buffer as an MR and receive lkey and rkey
to be used within work requests.
It is added as a new method under the MR object and using a new
ib_device callback - reg_dm_mr.
The command creates a standard ib_mr object which represents the
registered memory.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change adds uverbs support for allocation/freeing
of device memory commands.
A new uverbs object is defined of type idr to represent
and track the new resource type allocation per context.
The API requires provider driver to implement 2 new ib_device
callbacks - one for allocation and one for deallocation which
return and accept (respectively) the ib_dm object which represents
the allocated memory on the device.
The support is added via the ioctl command infrastructure
only.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change allows vendors to report device memory capability
max_dm_size - to user via uverbs command.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch comes as a result of Sinan Kaya's work and the decision that
writel() must be a strong enough barrier for DMA.
wmb usages in qedr driver have either been removed where they were there
only to order DMA accesses, and replaced with smp_wmb and comments for the
places that the barrier was there for SMP reasons.
Fixes: 561e5d4896 ("RDMA/qedr: eliminate duplicate barriers on weakly-ordered archs")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rxe driver's add_gid() and del_gid() callbacks are doing simple
checks which are already done by the ib core before invoking these
callback routines.
Therefore, code is simplified to skip implementing add_gid() and
del_gid() callback functions.
They are only invoked by ib_core if they are implemented.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fact this struct was not init'd like all the others was missed when
the padding reserved field was added.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 71e80a4781 ("RDMA/qedr: Fix uABI structure layouts for 32/64 compat")
Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a Raw Ethernet QP is created, we actually create a few objects.
One of these objects is a TIR. Currently, a TIR could hash (and spread
the traffic) by IP or port only. Adding a hashing by IPSec SPI to TIR
creation with the required UAPI bit.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Users should be able to query for IPSec support. Adding a few
capabilities bits as part of the driver specific part in
alloc_ucontext:
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA
Payload's header is returned with metadata representing the
IPSec decryption state.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_RX
Support ESP_AES_GCM in ingress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX
Support ESP_AES_GCM in egress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_RSS_ONLY
Hardware doesn't support matching SPI in flow steering rules
but just hashing and spreading the traffic accordingly.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This commit introduces support for the esp_aes_gcm flow
specification for the Innova device. To that end we add
support for egress steering and some validations that an
IPsec rule is indeed valid.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding implementation in mlx5 driver to modify action_xfrm object. This
merely call the accel layer. Currently a user can modify only the
ESN parameters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding implementation in mlx5 driver to create and destroy action_xfrm
object. This merely call the accel layer.
A user may pass MLX5_IB_XFRM_FLAGS_REQUIRE_METADATA flag which states
that [s]he expects a metadata header to be added to the payload. This
header represents information regarding the transformation's state.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding a new ESP steering match filter that could match against
spi and seq used in IPSec protocol.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
flow_actions of ESP type could be modified during runtime. This could be
common for example when ESN should be changed. Adding a new
UVERBS_FLOW_ACTION_ESP_MODIFY method for changing ESP parameters of an
existing ESP flow_action.
The new method uses the UVERBS_FLOW_ACTION_ESP_CREATE attributes, but
adds a new IB_FLOW_ACTION_ESP_FLAGS_MOD_ESP_ATTRS which means ESP_ATTRS
should be changed.
In addition, we add a new FLOW_ACTION_ESP_REPLAY_NONE replay type that
could be used when one wants to disable a replay protection over a
specific flow_action.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Binding a flow_action to flow steering rule requires using a new
specification. Therefore, adding such an IB_FLOW_SPEC_ACTION_HANDLE flow
specification.
Flow steering rules could use flow_action(s) and as of that we need to
avoid deleting flow_action(s) as long as they're being used.
Moreover, when the attached rules are deleted, action_handle reference
count should be decremented. Introducing a new mechanism of flow
resources to keep track on the attached action_handle(s). Later on, this
mechanism should be extended to other attached flow steering resources
like flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A verbs application may receive and transmits packets using a data
path pipeline. Sometimes, the first stage in the receive pipeline or
the last stage in the transmit pipeline involves transforming a
packet, either in order to make it easier for later stages to process
it or to prepare it for transmission over the wire. Such transformation
could be stripping/encapsulating the packet (i.e. vxlan),
decrypting/encrypting it (i.e. ipsec), altering headers, doing some
complex FPGA changes, etc.
Some hardware could do such transformations without software data path
intervention at all. The flow steering API supports steering a
packet (either to a QP or dropping it) and some simple packet
immutable actions (i.e. tagging a packet). Complex actions, that may
change the packet, could bloat the flow steering API extensively.
Sometimes the same action should be applied to several flows.
In this case, it's easier to bind several flows to the same action and
modify it than change all matching flows.
Introducing a new flow_action object that abstracts any packet
transformation (out of a standard and well defined set of actions).
This flow_action object could be tied to a flow steering rule via a
new specification.
Currently, we support esp flow_action, which encrypts or decrypts a
packet according to the given parameters. However, we present a
flexible schema that could be used to other transformation actions tied
to flow rules.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current implementation of kern_spec_to_ib_spec_filter, which takes
a uAPI based flow steering specification and creates the respective kernel
API flow steering structure, gets a ib_uverbs_flow_spec structure.
The new flow_action uAPI gets a match mask and filter from user-space
which aren't encoded in the flow steering's ib_uverbs_flow_spec structure.
Exporting the logic out of kern_spec_to_ib_spec_filter to get user-space
blobs rather than ib_uverbs_flow_spec structure.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ConnectX3 doesn't support egress flow steering. Return an EOPNOTSUPP
error when such a flow is being created.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Methods sometimes need to get one attribute out of a group of
pre-defined attributes. This is an enum-like behavior. Since
this is a common requirement, we add a new ENUM attribute to the
generic uverbs ioctl() layer. This attribute is embedded in methods,
like any other attributes we currently have. ENUM attributes point to
an array of standard UVERBS_ATTR_PTR_IN. The user-space encodes the
enum's attribute id in the id field and the internal PTR_IN attr id in
the enum_data.elem_id field. This ENUM attribute could be shared by
several attributes and it can get UVERBS_ATTR_SPEC_F_MANDATORY flag,
stating this attribute must be supported by the kernel, like any other
attribute.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to have a custom parsing tree, a provider driver needs to
assign its parsing tree to ib_device specs_tree field. Otherwise, the
uverbs client assigns a common default parsing tree for it.
In downstream patches, the mlx5_ib driver gains a custom parsing tree,
which contains both the common objects and a new flags field for the
UVERBS_FLOW_ACTION_ESP_CREATE command.
This patch makes mlx5_ib assign its own tree to specs_root, which
later on will be extended.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that IB core GID cache ensures that all RoCE entries have an
associated netdev remove null checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the IB core GID cache ensures that a zero GID doesn't exist in
the GID table remove zero GID checks from the provider drivers for
clarity.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Code is refactored to prepare separate functions for RoCE which can do more
complex operations related to reference counting, while still
maintainining code readability. This includes
(a) Simplification to not perform netdevice checks and modifications
for IB link layer.
(b) Do not add RoCE GID entry which has NULL netdevice; instead return
an error.
(c) If GID addition fails at provider level add_gid(), do not add the
entry in the cache and keep the entry marked as INVALID.
(d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they
can be used even for modifying default GIDs. This avoid some code
duplication in modifying default GIDs.
(e) find_gid() routine refers to the data entry flags to qualify a GID
as valid or invalid GID rather than depending on attributes and zeroness
of the GID content.
(f) gid_table_reserve_default() sets the GID default attribute at
beginning while setting up the GID table. There is no need to use
default_gid flag in low level functions such as write_gid(), add_gid(),
del_gid(), as they never need to update the DEFAULT property of the GID
entry while during GID table update.
As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer
searchable as described below.
A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB
spec version 1.3 section 4.1.1, point (6) whose snippet is below.
"The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as
the Reserved GID. It shall never be assigned to any endport. It shall
not be used as a destination address or in a global routing header
(GRH)."
GID table cache now only stores valid GID entries. Before this patch,
Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using
ib_find_cached_gid_by_port() and other similar find routines.
Zero GID is no longer searchable as it shall not to be present in GRH or
path recored entry as described in IB spec version 1.3 section 4.1.1,
point (6), section 12.7.10 and section 12.7.20.
ib_cache_update() is simplified to check link layer once, use unified
locking scheme for all link layers, removed temporary gid table
allocation/free logic.
Additionally,
(a) Expand ib_gid_attr to store port and index so that GID query
routines can get port and index information from the attribute structure.
(b) Expand ib_gid_attr to store device as well so that in future code when
GID reference counting is done, device is used to reach back to the GID
table entry.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently following inconsistencies exist.
1. ib_query_gid() returns GID from the software cache for a RoCE port
and returns GID from the HCA for an IB port.
This is incorrect because software GID cache is maintained regardless
of HCA port type.
2. GID is queries from the HCA via ib_query_gid and updated in the
software cache for IB link layer. Both of them might not be in sync.
ULPs such as SRP initiator, SRP target, IPoIB driver have historically
used ib_query_gid() API to query the GID. However CM used cached version
during CM processing, When software cache was introduced, this
inconsitency remained.
In order to simplify, improve readability and avoid link layer
specific above inconsistencies, this patch brings following changes.
1. ib_query_gid() always refers to the cache layer regardless of link
layer.
2. cache module who reads the GID entry from HCA and builds the cache,
directly invokes the HCA provider verb's query_gid() callback function.
3. ib_query_port() is being called in early stage where GID cache is not
yet build while reading port immutable property. Therefore it needs to
read the default GID from the HCA for IB link layer to publish the
subnet prefix.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Luc Van Oostenryck