The workqueue link_wq should only be destroyed when the hfi1 driver is
unloaded, not when the device is shut down.
Fixes: 71d47008ca ("IB/hfi1: Create workqueue for link events")
Link: https://lore.kernel.org/r/20200623204053.107638.70315.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Clang warns:
drivers/infiniband/hw/hfi1/qp.c:198:9: warning: implicit conversion from enumeration type 'enum opa_mtu' to different enumeration type 'enum ib_mtu' [-Wenum-conversion]
mtu = OPA_MTU_8192;
~ ^~~~~~~~~~~~
enum opa_mtu extends enum ib_mtu. There are typically two ways to deal
with this:
* Remove the expected types and just use 'int' for all parameters and
types.
* Explicitly cast the enums between each other.
This driver chooses to do the later so do the same thing here.
Fixes: 6d72344cf6 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit")
Link: https://lore.kernel.org/r/20200623005224.492239-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1062
Link: https://lore.kernel.org/linux-rdma/20200527040350.GA3118979@ubuntu-s3-xlarge-x86/
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When running iperf in a two host configuration the following trace can
occur:
[ 319.728730] NETDEV WATCHDOG: ib0 (hfi1): transmit queue 0 timed out
The issue happens because the current implementation relies on the netif
txq being stopped to control the flushing of the tx list.
There are two resources that the transmit logic can wait on and stop the
txq:
- SDMA descriptors
- Ring space to hold completions
The ring space is tested on the sending side and relieved when the ring is
consumed in the napi tx reaping.
Unfortunately, that reaping can run conncurrently with the workqueue
flushing of the txlist. If the txq is started just before the workitem
executes, the txlist will never be flushed, leading to the txq being
stuck.
Fix by:
- Adding sleep/wakeup wrappers
* Use an atomic to control the call to the netif routines inside the
wrappers
- Use another atomic to record ring space exhaustion
* Only wakeup when the a ring space exhaustion has happened and it
relieved
Add additional wrappers to clarify the ring space resource handling.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20200623204327.108092.4024.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current code mishandles -EBUSY in two ways:
- The flow change doesn't test the return from the flush and runs on to
process the current packet racing with the wakeup processing
- The -EBUSY handling for a single packet inserts the tx into the txlist
after the submit call, racing with the same wakeup processing
Fix the first by dropping the skb and returning NETDEV_TX_OK.
Fix the second by insuring the the list entry within the txreq is inited
when allocated. This enables the sleep routine to detect that the txreq
has used the non-list api and queue the packet to the txlist.
Both flaws can lead to having the flushing thread executing in causing two
threads to manipulate the txlist.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20200623204321.108092.83898.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the try_module_get calls were removed from opening and closing of the
i2c debugfs file, the corresponding module_put calls were missed. This
results in an inaccurate module use count that requires a power cycle to
fix.
Fixes: 09fbca8e62 ("IB/hfi1: No need to use try_module_get for debugfs")
Link: https://lore.kernel.org/r/20200623203230.106975.76240.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A few large, long discussed works this time. The RNBD block driver has
been posted for nearly two years now, and the removal of FMR has been a
recurring discussion theme for a long time. The usual smattering of
features and bug fixes.
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and a
mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block RDMA
device specific to ionos's cloud environment. It brings strong multipath
and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs and
drivers. FRWR should be preferred for at least a decade now.
-----BEGIN PGP SIGNATURE-----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=9zTe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
dummy_netdev shold be freed by free_netdev() instead of kfree(). Also
remove unneeded variable 'priv'
Fixes: 4730f4a6c6 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/20200602061635.31224-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hfi1_vnic_up() function doesn't check whether hfi1_netdev_rx_init()
returns errors. In hfi1_vnic_init() we need to change the code to
preserve the error code instead of returning success.
Fixes: 2280740f01 ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support")
Fixes: 4730f4a6c6 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/20200530140224.GA1330098@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
There is a spelling mistake in an error message. Fix it.
Link: https://lore.kernel.org/r/20200528110709.400935-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pin_user_pages_fast() doesn't need that from its caller.
NB: only reachable from ->ioctl(), and only under USER_DS
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into rdma.git for-next
Linux 5.7-rc6
Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.
Required for dependencies in the following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch hooks the transmit side of the datagram netdev with
ipoib by setting the rdma_netdev_get_params function for the
hfi1 ib_device_ops structue. It also enables the receiving side
by adding the AIP capability into the default capabilities.
Link: https://lore.kernel.org/r/20200511160712.173205.65700.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a simple trace event taking context number and building simple
histogram to print packets distribution between contexts.
Link: https://lore.kernel.org/r/20200511160700.173205.84270.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As described in earlier patches, ipoib netdev will share receive
contexts with existing VNIC netdev through a dummy netdev. The
following changes are made to achieve that:
- Set up netdev receive contexts after user contexts. A function is
added to count the available netdev receive contexts.
- Add functions to set/get receive map table free index.
- Rename NUM_VNIC_MAP_ENTRIES as NUM_NETDEV_MAP_ENTRIES.
- Let the dummy netdev own the receive contexts instead of VNIC.
- Allocate the dummy netdev when the hfi1 device is added and free it
when the device is removed.
- Initialize AIP RSM rules when the IpoIb rxq is initialized and
remove the rules when it is de-initialized.
- Convert VNIC to use the dummy netdev.
Link: https://lore.kernel.org/r/20200511160649.173205.4626.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the rx functions for the dummy netdev:
- Functions to allocate/free the dummy netdev.
- Functions to allocate/free receiving contexts for the netdev.
- Functions to initialize/de-initialize the receive queue.
- Functions to enable/disable the receive queue.
Link: https://lore.kernel.org/r/20200511160643.173205.75087.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the interrupt handler function, the NAPI poll
function, and its associated helper functions for receiving
accelerated ipoib packets. While we are here, fix the formats
of two error printouts.
Link: https://lore.kernel.org/r/20200511160637.173205.64890.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ipoib netdev will share receive contexts with existing VNIC netdev.
To achieve that, a dummy netdev is allocated with hfi1_devdata to
own the receive contexts, and ipoib and VNIC netdevs will be put
on top of it. Each receive context is associated with a single
NAPI object.
This patch adds the functions to receive incoming packets for
accelerated ipoib.
Link: https://lore.kernel.org/r/20200511160631.173205.54184.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Rename num_vnic_contexts as num_ndetdev_contexts since VNIC and ipoib
will share the same set of receive contexts.
Link: https://lore.kernel.org/r/20200511160625.173205.53306.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the ipoib UD mtu is restricted to 4K bytes. Remove this
limitation so that the IPOIB module can potentially use an MTU (in UD
mode) that is bounded by the MTU of the underlying device. A field is
added to the ib_port_attr structure to indicate the maximum physical
MTU the underlying device supports.
Link: https://lore.kernel.org/r/20200511160618.173205.23053.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is implementation of RSM rule for AIP packets.
AIP rule will use rule RSM2 and will match standard
Infiniband packet containg BTH (LNH==BTH) and
having Dest QPN prefixed with value 0x81. Spread between
receive contexts will be done using source QPN bits.
VNIC and AIP will share receive contexts, so their rules
will point to the same RMT entries and their shared
code is moved to separate functions.
If any of the rules is active RMT mapping will be skipped
for latter.
Changed function hfi1_vnic_is_rsm_full to be more general
and moved it from main header to chip.c.
Changed the order of RSM rules because AIP rule as
more specific one is needed to be placed before more
general QOS rule. Rules are occupying two last RSM
registers.
Link: https://lore.kernel.org/r/20200511160612.173205.73002.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adds capability to create a qpn to be recognized as an accelerated
UD QP for ipoib.
This is accomplished by reserving 0x81 in byte[0] of the qpn as the
prefix for these qp types and reserving qpns between 0x810000 and
0x81ffff.
The hfi1 capability mask already contained a flag for the VNIC netdev.
This has been renamed and extended to include both VNIC and ipoib.
The rvt code to allocate qps now recognizes this flag and sets 0x81
into byte[0] of the qpn.
The code to allocate qpns is modified to reset the qpn numbering when it
is detected that a value is located in byte[0] for a UD QP and it is a
qpn being requested for net dev use. If it is a regular UD QP then it is
allowable to have bits set in byte[0] of the qpn and provide the
previously normal behavior.
The code to free the qpn now checks for the AIP prefix value of 0x81 and
removes it from the qpn before being freed so that the lower 16 bit
number can be reused.
This patch requires minor changes in the IB core and ipoib to facilitate
the creation of accelerated UP QPs.
Link: https://lore.kernel.org/r/20200511160607.173205.11757.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The module parameter for KDETH qpns is being removed in favor
of always using the default value of 0x80 as the qpn prefix.
Defines have been added for various KDETH values including
the prefix of 0x80.
The reserved range now starts at the base value for KDETH
qpns (0x80) and extends up to and including the last qpn for
other reserved QP prefixed types.
Adjust other QP prefixed define names to match KDETH defined
names.
Link: https://lore.kernel.org/r/20200511160600.173205.27508.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This implements the transmit side of the multiple transmit queue RDMA
netdev used to accelerate ipoib. The receive side remains the ipoib
internal implementation.
The init/unint/open/stop netdev operations are saved off and called by the
versions within the hfi1 netdev in order to initialize the connected mode
resources present in ipoib thus allowing us to switch modes between
datagram and connected.
The datagram queue pair instantiated by the ipoib ulp is used by this
implementation for its queue pair number and to register with multicast.
The above queue pair is not used on transmit other than its qpn as the
verbs layer is skipped and packets are directly submitted to the sdma
engines.
Link: https://lore.kernel.org/r/20200511160554.173205.1369.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch implements the mechanism to accelerate the transmit side of
a multiple transmit queue RDMA netdev by submitting the packets to
the SDMA engine directly instead of sending through the verbs layer.
This patch also changes the UD/SEND_ONLY op to output the entropy value
in byte 0 of deth[1]. UD/SEND_ONLY_WITH_IMMEDIATE uses the previous
behavior with no entropy value being output.
The code in the ipoib rdma netdev which submits tx requests upon
successful submission will call trace_sdma_output_ibhdr to output
the ibhdr to the trace buffer.
Link: https://lore.kernel.org/r/20200511160548.173205.45616.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The accelerated IP capability bit is added to allow users to control
which feature is enabled and disabled.
Link: https://lore.kernel.org/r/20200511160541.173205.96870.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit noted below fixed a case where a pq is left on the sdma wait
list.
It however missed another case.
user_sdma_send_pkts() has two calls from hfi1_user_sdma_process_request().
If the first one fails as indicated by -EBUSY, the pq will be placed on
the waitlist as by design.
If the second call then succeeds, the pq is still on the waitlist setting
up a race with the interrupt handler if a subsequent request uses a
different SDMA engine
Fix by deleting the first call.
The use of pcount and the intent to send a short burst of packets followed
by the larger balance of packets was never correctly implemented, because
the two calls always send pcount packets no matter what. A subsequent
patch will correct that issue.
Fixes: 9a293d1e21 ("IB/hfi1: Ensure pq is not left on waitlist")
Link: https://lore.kernel.org/r/20200504130917.175613.43231.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The majority of the patches are cleanups, refactorings and clarity
improvements
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the new
ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces
-----BEGIN PGP SIGNATURE-----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=ae+a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The majority of the patches are cleanups, refactorings and clarity
improvements.
This cycle saw some more activity from Syzkaller, I think we are now
clean on all but one of those bugs, including the long standing and
obnoxious rdma_cm locking design defect. Continue to see many drivers
getting cleanups, with a few new user visible features.
Summary:
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't
working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the
new ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits)
RDMA/bnxt_re: make bnxt_re_ib_init static
IB/qib: Delete struct qib_ivdev.qp_rnd
RDMA/hns: Fix uninitialized variable bug
RDMA/hns: Modify the mask of QP number for CQE of hip08
RDMA/hns: Reduce the maximum number of extend SGE per WQE
RDMA/hns: Reduce PFC frames in congestion scenarios
RDMA/mlx5: Add support for RDMA TX flow table
net/mlx5: Add support for RDMA TX steering
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
IB/mlx5: Move to fully dynamic UAR mode once user space supports it
IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib
IB/mlx5: Extend QP creation to get uar page index from user space
IB/mlx5: Extend CQ creation to get uar page index from user space
IB/mlx5: Expose UAR object and its alloc/destroy commands
IB/hfi1: Get rid of a warning
RDMA/hns: Remove redundant judgment of qp_type
RDMA/hns: Remove redundant assignment of wc->smac when polling cq
RDMA/hns: Remove redundant qpc setup operations
RDMA/hns: Remove meaningless prints
...
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
When kobject_init_and_add() returns an error in the function
hfi1_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.
This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the hfi1 driver is unloaded, kmemleak will report the following
issue:
unreferenced object 0xffff8888461a4c08 (size 8):
comm "kworker/0:0", pid 5, jiffies 4298601264 (age 2047.134s)
hex dump (first 8 bytes):
73 64 6d 61 30 00 ff ff sdma0...
backtrace:
[<00000000311a6ef5>] kvasprintf+0x62/0xd0
[<00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90
[<0000000060657dbb>] kobject_init_and_add+0x5d/0xb0
[<00000000346fe72b>] 0xffffffffa0c5ecba
[<000000006cfc5819>] 0xffffffffa0c866b9
[<0000000031c65580>] 0xffffffffa0c38e87
[<00000000e9739b3f>] local_pci_probe+0x41/0x80
[<000000006c69911d>] work_for_cpu_fn+0x16/0x20
[<00000000601267b5>] process_one_work+0x171/0x380
[<0000000049a0eefa>] worker_thread+0x1d1/0x3f0
[<00000000909cf2b9>] kthread+0xf8/0x130
[<0000000058f5f874>] ret_from_fork+0x35/0x40
This patch fixes the issue by:
- Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs().
- This will fix the memory leak.
- Calling kobject_put() to unwind operations only for those entries in
dd->per_sdma[] whose operations have succeeded (including the current
one that has just failed) in hfi1_verbs_register_sysfs().
Cc: <stable@vger.kernel.org>
Fixes: 0cb2aa690c ("IB/hfi1: Add sysfs interface for affinity setup")
Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200319154641.23711-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following warning can occur when a pq is left on the dmawait list and
the pq is then freed:
WARNING: CPU: 47 PID: 3546 at lib/list_debug.c:29 __list_add+0x65/0xc0
list_add corruption. next->prev should be prev (ffff939228da1880), but was ffff939cabb52230. (next=ffff939cabb52230).
Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd ast ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev drm_panel_orientation_quirks i2c_i801 mei_me lpc_ich mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables
nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci libahci i2c_algo_bit dca libata ptp pps_core crc32c_intel [last unloaded: i2c_algo_bit]
CPU: 47 PID: 3546 Comm: wrf.exe Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.41.1.el7.x86_64 #1
Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019
Call Trace:
[<ffffffff91f65ac0>] dump_stack+0x19/0x1b
[<ffffffff91898b78>] __warn+0xd8/0x100
[<ffffffff91898bff>] warn_slowpath_fmt+0x5f/0x80
[<ffffffff91a1dabe>] ? ___slab_alloc+0x24e/0x4f0
[<ffffffff91b97025>] __list_add+0x65/0xc0
[<ffffffffc03926a5>] defer_packet_queue+0x145/0x1a0 [hfi1]
[<ffffffffc0372987>] sdma_check_progress+0x67/0xa0 [hfi1]
[<ffffffffc03779d2>] sdma_send_txlist+0x432/0x550 [hfi1]
[<ffffffff91a20009>] ? kmem_cache_alloc+0x179/0x1f0
[<ffffffffc0392973>] ? user_sdma_send_pkts+0xc3/0x1990 [hfi1]
[<ffffffffc0393e3a>] user_sdma_send_pkts+0x158a/0x1990 [hfi1]
[<ffffffff918ab65e>] ? try_to_del_timer_sync+0x5e/0x90
[<ffffffff91a3fe1a>] ? __check_object_size+0x1ca/0x250
[<ffffffffc0395546>] hfi1_user_sdma_process_request+0xd66/0x1280 [hfi1]
[<ffffffffc034e0da>] hfi1_aio_write+0xca/0x120 [hfi1]
[<ffffffff91a4245b>] do_sync_readv_writev+0x7b/0xd0
[<ffffffff91a4409e>] do_readv_writev+0xce/0x260
[<ffffffff918df69f>] ? pick_next_task_fair+0x5f/0x1b0
[<ffffffff918db535>] ? sched_clock_cpu+0x85/0xc0
[<ffffffff91f6b16a>] ? __schedule+0x13a/0x860
[<ffffffff91a442c5>] vfs_writev+0x35/0x60
[<ffffffff91a4447f>] SyS_writev+0x7f/0x110
[<ffffffff91f78ddb>] system_call_fastpath+0x22/0x27
The issue happens when wait_event_interruptible_timeout() returns a value
<= 0.
In that case, the pq is left on the list. The code continues sending
packets and potentially can complete the current request with the pq still
on the dmawait list provided no descriptor shortage is seen.
If the pq is torn down in that state, the sdma interrupt handler could
find the now freed pq on the list with list corruption or memory
corruption resulting.
Fix by adding a flush routine to ensure that the pq is never on a list
after processing a request.
A follow-up patch series will address issues with seqlock surfaced in:
https://lore.kernel.org/r/20200320003129.GP20941@ziepe.ca
The seqlock use for sdma will then be converted to a spin lock since the
list_empty() doesn't need the protection afforded by the sequence lock
currently in use.
Fixes: a0d406934a ("staging/rdma/hfi1: Add page lock limit check for SDMA requests")
Link: https://lore.kernel.org/r/20200320200200.23203.37777.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The field kobj was added to hfi1_devdata structure to manage the life time
of the hfi1_devdata structure for PSM accesses:
commit e11ffbd575 ("IB/hfi1: Do not free hfi1 cdev parent structure early")
Later another mechanism user_refcount/user_comp was introduced to provide
the same functionality:
commit acd7c8fe14 ("IB/hfi1: Fix an Oops on pci device force remove")
This patch will remove this kobj field, as it is no longer needed.
Link: https://lore.kernel.org/r/20200316210500.7753.4145.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc5' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5cOX8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGw0AH/0nex1uEpzUTm+Gw
D8QPFr3y61sYLu7sIMVt39+Zl6OSxvOOX14QIM/mrNrzjjRI8EXGvYgES5gSO4on
6NLS6/64c1oQThDHCsxusKoSWLZ9KqP2vRPt7tZjn7DZMzEsuLhlINKBeupcqALX
FnOBr768P+if/j0WcDR2pBaMg3ch+XC5sfYav7kapjgWUqCx9BvrHKLXXdlEGUC0
7Ku7PH+nF7CIHiTay+i89odvOd8aLGsa/SUf5XGauKkH65VgQkmksgPeZUPqTnyC
MEsyLJLfn4AP3ySwqzfSLac8jqZG8FGBt4DgM2MQBHibctzfeMIznfcfh/A8+Edx
jqLKLAs=
=4075
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rc4' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.
This brings MAD packet processing in line with what is done for non-MAD
packets.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
+n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
=pDE3
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the EFI runtime services check with one that tells us whether
EFI GetVariable() is implemented by the firmware.
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200213010425.GA13068@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> # added a few more
Each user context is allocated a certain number of RcvArray (TID)
entries and these entries are managed through TID groups. These groups
are put into one of three lists in each user context: tid_group_list,
tid_used_list, and tid_full_list, depending on the number of used TID
entries within each group. When TID packets are expected, one or more
TID groups will be allocated. After the packets are received, the TID
groups will be freed. Since multiple user threads may access the TID
groups simultaneously, a mutex exp_mutex is used to synchronize the
access. However, when the user file is closed, it tries to release
all TID groups without acquiring the mutex first, which risks a race
condition with another thread that may be releasing its TID groups,
leading to data corruption.
This patch addresses the issue by acquiring the mutex first before
releasing the TID groups when the file is closed.
Fixes: 3abb33ac65 ("staging/hfi1: Add TID cache receive init and free funcs")
Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kaike Wan