PTP TX timestamp handling was observed to be broken with this driver
when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
the expected TX timestamp after transmitting a packet, causing it to
enter a failure state.
The problem appears to be due to the way that the driver pads packets
which are smaller than the Ethernet minimum of 60 bytes. If headroom
space was available in the SKB, this caused the driver to move the data
back to utilize it. However, this appears to cause other data references
in the SKB to become inconsistent. In particular, this caused the
ptp_one_step_sync function to later (in the TX completion path) falsely
detect the packet as a one-step SYNC packet, even when it was not, which
caused the TX timestamp to not be processed when it should be.
Using the headroom for this purpose seems like an unnecessary complexity
as this is not a hot path in the driver, and in most cases it appears
that there is sufficient tailroom to not require using the headroom
anyway. Remove this usage of headroom to prevent this inconsistency from
occurring and causing other problems.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perf test "build id cache operations" fails for PE executable. Logs
below from powerpc system. Same is observed on x86 as well.
<<>>
Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!
<<>>
The test tries to do:
<<>>
mkdir /tmp/perf.debug.TeY1
perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe
<<>>
The option "--buildid-dir" sets the build id cache directory as
/tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a
./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache.
The testcase, sets buildid-dir and adds the file: pe-file.exe to build
id cache. To check if the command is run successfully, "check" function
looks for presence of the file in buildid cache directory. But the check
here expects the added file to be executable. Snippet below:
<<>>
if [ ! -x $file ]; then
echo "failed: file ${file} does not exist"
exit 1
fi
<<>>
The buildid test is done for sha1 binary, md5 binary and also for PE
file. The first two binaries are created at runtime by compiling with
"--build-id" option and hence the check for sha1/md5 test should use [ !
-x ]. But in case of PE file, the permission for this input file is
rw-r--r-- Hence the file added to build id cache has same permissoin
Original file:
ls tests/pe-file.exe | xargs stat --printf "%n %A \n"
tests/pe-file.exe -rw-r--r--
buildid cache file:
ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n"
/tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r--
Fix the test to match with the permission of original file in case of FE
file. ie if the "tests/pe-file.exe" file is not having exec permission,
just check for existence of the buildid file using [ ! -e <file> ]
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230116050131.17221-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pablo Niera Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Fix syn-retransmits until initiator gives up when connection is re-used
due to rst marked as invalid, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The test "build id cache operations" fails on powerpc as below:
Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.ZTu/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!
The failing test is when trying to add pe-file.exe to build id cache.
'perf buildid-cache' can be used to add/remove/manage files from the
build-id cache. "-a" option is used to add a file to the build-id cache.
Simple command to do so for a PE exe file:
# ls -ltr tests/pe-file.exe
-rw-r--r--. 1 root root 75595 Jan 10 23:35 tests/pe-file.exe
The file is in home directory.
# mkdir /tmp/perf.debug.TeY1
# perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a tests/pe-file.exe
The above will create ".build-id" folder in build id directory, which is
/tmp/perf.debug.TeY1. Also adds file to this folder under build id.
Example:
# ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/
total 76
-rw-r--r--. 1 root root 0 Jan 11 00:38 probes
-rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf
We can see in the results that file mode for original file and file in
build id directory is different. ie, build id file has executable
permission whereas original file doesn’t have.
The code path and function (build_id_cache__add to add a file to the
cache is in "util/build-id.c". In build_id_cache__add() function, it
first attempts to link the original file to destination cache folder.
If linking the file fails (which can happen if the destination and
source is on a different mount points), it will copy the file to
destination. Here copyfile() routine explicitly uses mode as "755" and
hence file in the destination will have executable permission.
Code snippet:
if (link(realname, filename) && errno != EEXIST && copyfile(name, filename))
strace logs:
172285 link("/home/<user_name>/linux/tools/perf/tests/pe-file.exe", "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf") = -1 EXDEV (Invalid cross-device link)
172285 newfstatat(AT_FDCWD, "tests/pe-file.exe", {st_mode=S_IFREG|0644, st_size=75595, ...}, 0) = 0
172285 openat(AT_FDCWD, "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/.elf.KbAnsl", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
172285 fchmod(3, 0755) = 0
172285 openat(AT_FDCWD, "tests/pe-file.exe", O_RDONLY) = 4
172285 mmap(NULL, 75595, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7fffa5cd0000
172285 pwrite64(3, "MZ\220\0\3\0\0\0\4\0\0\0\377\377\0\0\270\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 75595, 0) = 75595
Whereas if the link succeeds, it succeeds in the first attempt itself
and the file in the build-id dir will have same permission as original
file.
Example, above uses /tmp. Instead if we use "--buildid-dir /home/build",
linking will work here since mount points are same. Hence the
destination file will not have executable permission.
Since the testcase "tests/shell/buildid.sh" always looks for executable
file, test fails in powerpc environment when test is run from /root.
The patch adds a change in build_id_cache__add() to use copyfile_mode()
which also passes the file’s original mode as argument. This way the
destination file mode also will be same as original file.
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230116050131.17221-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current implementation does not account for a trailing backslash
followed by a null-byte.
If a null-byte is encountered following a backslash, normalize() will
continue reading (and potentially writing) into garbage memory ignoring
the EOS null-byte.
Signed-off-by: Sohom Datta <sohomdatta1+git@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221204105836.1012885-1-sohomdatta1+git@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
07a368b3f5 ("bug: introduce ASSERT_STRUCT_OFFSET")
This cset only introduces a build time assert macro, that may be useful
at some point for tooling, for now it silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h'
diff -u tools/include/linux/build_bug.h include/linux/build_bug.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y8f0jqQFYDAOBkHx@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
b5f0de6df6 ("net: dev: Convert sa_data to flexible array in struct sockaddr")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
decb17aeb8 ("KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations")
07e39e60bb ("arm64: Add Cortex-715 CPU part definition")
8ec8490a19 ("arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro")
That addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/Y8fvEGCGn+227qW0@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
9cb1096f85 ("KVM: arm64: Enable ring-based dirty memory tracking")
That doesn't result in any changes in tooling (built on a Libre Computer
Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this
perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y8fmIT5PIfGaZuwa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the function sdma_load_context() fails, the sdma_desc will be
freed, but the allocated desc->bd is forgot to be freed.
We already met the sdma_load_context() failure case and the log as
below:
[ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready
...
In this case, the desc->bd will not be freed without this change.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221130090800.102035-1-hui.wang@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current global interrupt clear programming register offset
was not correct. Fix the programming with right offset
Fixes: ded1f3db4c ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips")
Cc: stable@vger.kernel.org
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20230102064844.31306-1-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On ARMv5 and earlier, a randconfig build can still run into
WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE
Depends on [n]: IOMMU_SUPPORT [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y]) && !GENERIC_ATOMIC64 [=y]
Selected by [y]:
- DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) && MMU [=y]
Rework the dependencies to always require a working cmpxchg64.
Fixes: db594ba3fc ("drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117164456.1591901-1-arnd@kernel.org
ldma_cfg_init() will parse DT to retrieve certain configs.
However, that is called before ldma_dma_init_vXX(), which
will make some initialization to channel configs. It will
thus incorrectly overwrite certain configs that are declared
in DT.
To fix that, we move DT parsing after initialization.
Function name is renamed to better represent what it does.
Fixes: 32d31c79a1 ("dmaengine: Add Intel LGM SoC DMA support.")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/afef6fc1ed20098b684e0d53737d69faf63c125f.1672887183.git.pliem@maxlinear.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make sure calibration values are defined to prevent potential kernel
crashes. This fixes a hypothetical issue for virtual or clone devices
inspired by a similar fix for DS4.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some DualShock4 devices report invalid calibration data resulting
in kernel oopses due to division by zero during report handling.
The devices affected generally appear to be clone devices, which don't
implement all reports properly and don't populate proper calibration
data. The issue may have been seen on an official device with erased
calibration reports.
This patch prevents the crashes by essentially disabling calibration
when invalid values are detected.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Tested-by: Alain Carlucci <alain.carlucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The XP-PEN Deco 01 V2 is a UGEE v2 device with a frame with 8 buttons.
Its pen has 2 buttons, supports tilt and pressure.
Add its ID in order to support the device.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/839
Tested-by: Mark Waddoups <mwaddoups@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit removes eswitch mode none. So after devlink reload
in switchdev mode, eswitch mode is not changed. But actually eswitch
is disabled during devlink reload.
Fix it by setting eswitch mode to legacy when disabling eswitch
which is called by reload_down.
Fixes: f019679ea5 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
ASO operations are global to whole IPsec as they share one DMA address
for all operations. As such all WQE operations need to be protected with
lock. In this case, it must be spinlock to allow mlx5e_ipsec_aso_query()
operate in atomic context.
Fixes: 1ed78fc033 ("net/mlx5e: Update IPsec soft and hard limits")
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
aso->use_cache variable introduced in commit 8c582ddfbb ("net/mlx5e: Handle
hardware IPsec limits events") was an optimization to skip recurrent calls
to mlx5e_ipsec_aso_query(). Such calls are possible when lifetime event is
generated:
-> mlx5e_ipsec_handle_event()
-> mlx5e_ipsec_aso_query() - first call
-> xfrm_state_check_expire()
-> mlx5e_xfrm_update_curlft()
-> mlx5e_ipsec_aso_query() - second call
However, such optimization not really effective as mlx5e_ipsec_aso_query()
is needed to be called for update ESN anyway, which was missed due to misplaced
use_cache assignment.
Fixes: cee137a634 ("net/mlx5e: Handle ESN update events")
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently decap action is set based on tunnel_id. That means it is
set unconditionally. But for decap, ct and sample actions, decap is
done before ct. No need to decap again in sample.
And the actions are set correctly when parsing. So set decap action
based on attr instead of tunnel_id.
Fixes: 2741f22309 ("net/mlx5e: TC, Support sample offload action for tunneled traffic")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
According to HW spec parent_element_id field should be reserved (0x0) when calling
MODIFY_SCHEDULING_ELEMENT command.
This patch remove the wrong initialization of reserved field, parent_element_id, on
mlx5_qos_update_node.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
According to HW spec element_type, element_attributes and parent_element_id fields
should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command.
This patch remove initialization of these fields when calling the command.
Fixes: bd77bf1cb5 ("net/mlx5: Add SRIOV VF max rate configuration support")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This validation function is relevant only for XSK cases, hence it
assumes to be called only with xsk != NULL.
Thus checking for invalid xsk pointer is redundant and misleads static
code analyzers.
This commit removes redundant xsk pointer check.
This solves the following smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en/params.c:481
mlx5e_mpwrq_validate_xsk() error: we previously assumed 'xsk' could be
null (see line 478)
Fixes: 6470d2e7e8 ("net/mlx5e: xsk: Use KSM for unaligned XSK")
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If the cpio command is not available the error emitted by
gen_kheaders.so is not clear as all output of the call to cpio is
discarded:
GNU make 4.4:
GEN kernel/kheaders_data.tar.xz
find: 'standard output': Broken pipe
find: write error
make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127
make[1]: *** [scripts/Makefile.build:504: kernel] Error 2
GNU make < 4.4:
GEN kernel/kheaders_data.tar.xz
make[2]: *** [kernel/Makefile:157: kernel/kheaders_data.tar.xz] Error 127
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [scripts/Makefile.build:504: kernel] Error 2
Add an explicit check that will trigger a clear message about the issue:
CHK kernel/kheaders_data.tar.xz
./kernel/gen_kheaders.sh: line 17: type: cpio: not found
The other commands executed by gen_kheaders.sh are part of a standard
installation, so they are not checked.
Reported-by: Amy Parker <apark0006@student.cerritos.edu>
Link: https://lore.kernel.org/lkml/CAPOgqxFva=tOuh1UitCSN38+28q3BNXKq19rEsVNPRzRqKqZ+g@mail.gmail.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix a buffer overflow in mgmt_mesh_add
- Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
- Fix hci_qca shutdown on closed serdev
- Fix possible circular locking dependencies on ISO code
- Fix possible deadlock in rfcomm_sk_state_change
-----BEGIN PGP SIGNATURE-----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=Q8Ei
-----END PGP SIGNATURE-----
Merge tag 'for-net-2023-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix a buffer overflow in mgmt_mesh_add
- Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
- Fix hci_qca shutdown on closed serdev
- Fix possible circular locking dependencies on ISO code
- Fix possible deadlock in rfcomm_sk_state_change
* tag 'for-net-2023-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix possible deadlock in rfcomm_sk_state_change
Bluetooth: ISO: Fix possible circular locking dependency
Bluetooth: hci_event: Fix Invalid wait context
Bluetooth: ISO: Fix possible circular locking dependency
Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()
Bluetooth: hci_qca: Fix driver shutdown on closed serdev
Bluetooth: hci_conn: Fix memory leaks
Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
Bluetooth: Fix a buffer overflow in mgmt_mesh_add()
====================
Link: https://lore.kernel.org/r/20230118002944.1679845-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY8WHEgAKCRDbK58LschI
g+gDAP9K24FwikbCHy145i/KHFaIk4ZDSIfjff8uyKDq73h9QwEAvBvrxko7d+dh
EHdhJGoqufV8n5wilYOrOGN7ShMwFAg=
=aFQl
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2023-01-16
We've added 6 non-merge commits during the last 8 day(s) which contain
a total of 6 files changed, 22 insertions(+), 24 deletions(-).
The main changes are:
1) Mitigate a Spectre v4 leak in unprivileged BPF from speculative
pointer-as-scalar type confusion, from Luis Gerhorst.
2) Fix a splat when pid 1 attaches a BPF program that attempts to
send killing signal to itself, from Hao Sun.
3) Fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events, from Paul Moore.
4) Fix BPF verifier warning triggered from invalid kfunc call in
backtrack_insn, also from Hao Sun.
5) Fix potential deadlock in htab_lock_bucket from same bucket index
but different map_locked index, from Tonghao Zhang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation
bpf: hash map, avoid deadlock with suitable hash mask
bpf: remove the do_idr_lock parameter from bpf_prog_free_id()
bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD and PERF_BPF_EVENT_PROG_UNLOAD
bpf: Skip task with pid=1 in send_signal_common()
bpf: Skip invalid kfunc call in backtrack_insn
====================
Link: https://lore.kernel.org/r/20230116230745.21742-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to other additional responsibilities Tom would no longer
be able to support AMD XGBE driver.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230116085015.443127-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().
Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.
Fixes: 1aac309d32 ("net: ipa: use autosuspend")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reports a possible deadlock in rfcomm_sk_state_change [1].
While rfcomm_sock_connect acquires the sk lock and waits for
the rfcomm lock, rfcomm_sock_release could have the rfcomm
lock and hit a deadlock for acquiring the sk lock.
Here's a simplified flow:
rfcomm_sock_connect:
lock_sock(sk)
rfcomm_dlc_open:
rfcomm_lock()
rfcomm_sock_release:
rfcomm_sock_shutdown:
rfcomm_lock()
__rfcomm_dlc_close:
rfcomm_k_state_change:
lock_sock(sk)
This patch drops the sk lock before calling rfcomm_dlc_open to
avoid the possible deadlock and holds sk's reference count to
prevent use-after-free after rfcomm_dlc_open completes.
Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com
Fixes: 1804fdf6e4 ("Bluetooth: btintel: Combine setting up MSFT extension")
Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 [1]
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following trace caused by attempting to lock
cmd_sync_work_lock while holding the rcu_read_lock:
kworker/u3:2/212 is trying to lock:
ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at:
hci_cmd_sync_queue+0xad/0x140
other info that might help us debug this:
context-{4:4}
4 locks held by kworker/u3:2/212:
#0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
process_one_work+0x4dc/0x9a0
#1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
at: process_one_work+0x4dc/0x9a0
#2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at:
hci_cc_le_set_cig_params+0x64/0x4f0
#3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at:
hci_cc_le_set_cig_params+0x2f9/0x4f0
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is
not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR
to pass the instance to callback so no memory needs to be allocated.
Fixes: 651cd3d65b ("Bluetooth: convert hci_update_adv_data to hci_sync")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either. Also skip this step if device is powered off
(qca_power_shutdown()).
The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:
Unable to handle kernel paging request at virtual address
0072662f67726fd7
...
CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W
6.1.0-rt5-00325-g8a5f56bcfcca #8
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
tty_driver_flush_buffer+0x4/0x30
serdev_device_write_flush+0x24/0x34
qca_serdev_shutdown+0x80/0x130 [hci_uart]
device_shutdown+0x15c/0x260
kernel_restart+0x48/0xac
KASAN report:
BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1
CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xdc/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x68/0x84
print_report+0x188/0x488
kasan_report+0xa4/0xf0
__asan_load8+0x80/0xac
tty_driver_flush_buffer+0x1c/0x50
ttyport_write_flush+0x34/0x44
serdev_device_write_flush+0x48/0x60
qca_serdev_shutdown+0x124/0x274
device_shutdown+0x1e8/0x350
kernel_restart+0x48/0xb0
__do_sys_reboot+0x244/0x2d0
__arm64_sys_reboot+0x54/0x70
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x44/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xbc/0x140
el0t_64_sync+0x190/0x194
Fixes: 7e7bbddd02 ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or
hci_le_big_terminate(), the memory pointed by variable d is not freed,
which will cause memory leak. Add release process to error path.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't
support ISO channels, but in order to check if ISO channels are
supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the
features bits can be checked on hci_le_read_buffer_size_sync.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817
Fixes: c1631dbc00 ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Smatch Warning:
net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy()
'mesh_tx->param' too small (48 vs 50)
Analysis:
'mesh_tx->param' is array of size 48. This is the destination.
u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48.
But in the caller 'mesh_send' we reject only when len > 50.
len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a connection is re-used, following can happen:
[ connection starts to close, fin sent in either direction ]
> syn # initator quickly reuses connection
< ack # peer sends a challenge ack
> rst # rst, sequence number == ack_seq of previous challenge ack
> syn # this syn is expected to pass
Problem is that the rst will fail window validation, so it gets
tagged as invalid.
If ruleset drops such packets, we get repeated syn-retransmits until
initator gives up or peer starts responding with syn/ack.
Before the commit indicated in the "Fixes" tag below this used to work:
The challenge-ack made conntrack re-init state based on the challenge
ack itself, so the following rst would pass window validation.
Add challenge-ack support: If we get ack for syn, record the ack_seq,
and then check if the rst sequence number matches the last ack number
seen in reverse direction.
Fixes: c7aab4f170 ("netfilter: nf_conntrack_tcp: re-init for syn packets only")
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
To pick the changes in:
8aff460f21 ("KVM: x86: Add a VALID_MASK for the flags in kvm_msr_filter_range")
c1340fe359 ("KVM: x86: Add a VALID_MASK for the flag in kvm_msr_filter")
be83794210 ("KVM: x86: Disallow the use of KVM_MSR_FILTER_DEFAULT_ALLOW in the kernel")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y8VR5wSAkd2A0HxS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
b0305c1e0e ("KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Y7Loj5slB908QSXf@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
gcc-13 notices a type mismatch between function declaration
and definition for a few functions that have been converted
from returning vchiq specific status values to regular error
codes:
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:662:5: error: conflicting types for 'vchiq_initialise' due to enum/integer mismatch; have 'int(struct vchiq_instance **)' [-Werror=enum-int-mismatch]
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1411:1: error: conflicting types for 'vchiq_use_internal' due to enum/integer mismatch; have 'int(struct vchiq_state *, struct vchiq_service *, enum USE_TYPE_E)' [-Werror=enum-int-mismatch]
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1468:1: error: conflicting types for 'vchiq_release_internal' due to enum/integer mismatch; have 'int(struct vchiq_state *, struct vchiq_service *)' [-Werror=enum-int-mismatch]
Change the declarations to match the actual function definition.
Fixes: a9fbd828be ("staging: vchiq_arm: drop enum vchiq_status from vchiq_*_internal")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230117163957.1109872-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GCC 11.1.0 and 11.2.0 generate a wrong warning when compiling the
kernel e.g. with allmodconfig:
arch/s390/kernel/setup.c: In function ‘setup_lowcore_dat_on’:
./include/linux/fortify-string.h:57:33: error: ‘__builtin_memcpy’ reading 128 bytes from a region of size 0 [-Werror=stringop-overread]
...
arch/s390/kernel/setup.c:526:9: note: in expansion of macro ‘memcpy’
526 | memcpy(abs_lc->cregs_save_area, S390_lowcore.cregs_save_area,
| ^~~~~~
This could be addressed by using absolute_pointer() with the
S390_lowcore macro, but this is not a good idea since this generates
worse code for performance critical paths.
Therefore simply use a for loop to copy the array in question and get
rid of the warning.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When there are no read queues read requests will be assigned a
default queue on allocation. However, blk_mq_get_cached_request() is not
prepared for that and will fail all attempts to grab read requests from
the cache. Worst case it doubles the number of requests allocated,
roughly half of which will be returned by blk_mq_free_plug_rqs().
It only affects batched allocations and so is io_uring specific.
For reference, QD8 t/io_uring benchmark improves by 20-35%.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/80d4511011d7d4751b4cf6375c4e38f237d935e3.1673955390.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Robert Hancock