Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of fairly
complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for each
process and preload them on context switch. Leading to a 27% speedup for our
context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print more debug
information when they occur, and try to continue running by flushing the SLB
and reloading, rather than treating them as fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on 64-bit
Book3S. We only support up to 512TB as regular system memory, otherwise the
percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are presented
to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE flags.
- Add a driver for the PAPR SCM (storage class memory) interface, allowing
guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we need to use
a trampoline to get to ftrace_caller().
Many other smaller enhancements and cleanups.
Thanks to:
Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda
Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel
Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari
Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael
Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran,
Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam
Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell,
Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant
Hegde, YueHaibing, zhong jiang,
-----BEGIN PGP SIGNATURE-----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=I0pj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of
fairly complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for
each process and preload them on context switch. Leading to a 27%
speedup for our context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print
more debug information when they occur, and try to continue running
by flushing the SLB and reloading, rather than treating them as
fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on
64-bit Book3S. We only support up to 512TB as regular system
memory, otherwise the percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task
canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are
presented to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE
flags.
- Add a driver for the PAPR SCM (storage class memory) interface,
allowing guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we
need to use a trampoline to get to ftrace_caller().
And many other smaller enhancements and cleanups.
Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"
* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
Revert "selftests/powerpc: Fix out-of-tree build errors"
powerpc/msi: Fix compile error on mpc83xx
powerpc: Fix stack protector crashes on CPU hotplug
powerpc/traps: restore recoverability of machine_check interrupts
powerpc/64/module: REL32 relocation range check
powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
selftests/powerpc: Add a test of wild bctr
powerpc/mm: Fix page table dump to work on Radix
powerpc/mm/radix: Display if mappings are exec or not
powerpc/mm/radix: Simplify split mapping logic
powerpc/mm/radix: Remove the retry in the split mapping logic
powerpc/mm/radix: Fix small page at boundary when splitting
powerpc/mm/radix: Fix overuse of small pages in splitting logic
powerpc/mm/radix: Fix off-by-one in split mapping logic
powerpc/ftrace: Handle large kernel configs
powerpc/mm: Fix WARN_ON with THP NUMA migration
selftests/powerpc: Fix out-of-tree build errors
powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
powerpc/time: isolate scaled cputime accounting in dedicated functions.
...
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----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=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
The networking merge brought in the experimental support for the
Qualcomm ath10k system NOC, which selects QCOM_QMI_HELPERS as a
dependency.
But the ATH10K_SNOC option (which selects QCOM_QMI_HELPERS) depends on
ARCH_QCOM || COMPILE_TEST in order to get wider build testing than just
the unusual QCOM architecture build, while the QCOM_QMI_HELPERS option
doesn't have that COMPILE_TEST option and is limited to only ARCH_QCOM.
As a result, a "make allmodconfig" complains
WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS
Depends on [n]: ARCH_QCOM && NET [=y]
Selected by [m]:
- ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM || COMPILE_TEST [=y])
Fix the config-time warning by making QCOM_QMI_HELPERS available when
COMPILE_TEST, since the result seems to build fine.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Govind Singh <govinds@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ioremap_prot() with flag set to 0 relies on a hack in
__ioremap_caller() which adds PAGE_KERNEL flags when the
handed flags don't look like a valid set of flags
(ie don't include _PAGE_PRESENT)
The intention being to map cached memory, use ioremap_cache() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- Update qbman driver to better work with CPU hotplug
- Add Kconfig dependency of 64-bit DMA addressing for qbman driver
- Use last reponse to determine valid bit for qbman driver
- Defer bman_portals probe if bman is not probed
- Add interrupt coalescing APIs to qbman driver
-----BEGIN PGP SIGNATURE-----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=2fhR
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-next-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers
NXP/FSL SoC drivers updates for v4.20 take 2
- Update qbman driver to better work with CPU hotplug
- Add Kconfig dependency of 64-bit DMA addressing for qbman driver
- Use last reponse to determine valid bit for qbman driver
- Defer bman_portals probe if bman is not probed
- Add interrupt coalescing APIs to qbman driver
* tag 'soc-fsl-next-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qbman: add interrupt coalesce changing APIs
soc: fsl: bman_portals: defer probe after bman's probe
soc: fsl: qbman: Use last response to determine valid bit
soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
soc: fsl: qbman: Check if CPU is offline when initializing portals
soc: fsl: qman_portals: defer probe after qman's probe
soc: fsl: qbman: add APIs to retrieve the probing status
soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()
soc: fsl: qbman: qman: avoid allocating from non existing gen_pool
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the APIs required to control the QMan portal interrupt coalescing
settings.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
A crash in bman portal probing could not be triggered (as is the case
with qman portals) but it does make calls [1] into the bman driver so
lets make sure the bman portal probing happens after bman's.
[1] bman_p_irqsource_add() (in bman) called by:
init_pcfg() called by:
bman_portal_probe()
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the last valid response when determining what valid bit
to use next for management commands. This is needed in the
case that the portal was previously used by other software
like a bootloader or if the kernel is restarted without a
hardware reset.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The QBMan block is memory mapped on SoCs above a 32 bit (4 Gigabyte)
boundary so enabling 64 bit DMA addressing is needed for QBMan to
be usuable.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The existing code sets portal IRQ affinity to CPU 0 in the
offline hotplug handler. If CPU 0 is offline this is invalid.
Use a different online CPU instead.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
If the CPU to affine the portal interrupt is offline at boot time
affine the portal interrupt to another online CPU. If the CPU is later
brought online the hotplug handler will correctly adjust the affinity.
Moved common code in a function.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
- Fix crash of qman_portal by deferring its probe if qman is not probed
-----BEGIN PGP SIGNATURE-----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=qVf2
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-fix-v4.19-2' into HEAD
NXP/FSL SoC driver fixes for v4.19 round 2
- Fix crash of qman_portal by deferring its probe if qman is not probed
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Li Yang <leoyang.li@nxp.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-soc@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Qiang Zhao <qiang.zhao@nxp.com>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
- A couple of patches from Anson to update variable and macro naming
in GPCv2 driver, as a preparation of reusing the driver on i.MX8.
- Switch GPC/GPCv2 drivers to use SPDX identifier for licence claiming.
- Clean up the unnecessary DT node name NULL pointer checking from
imx-weim driver, since it can never be NULL at all.
- A couple of improvements on GPC driver from Sven Schmitt to correct
PDN register and use GPC_PGC_DOMAIN_* indexes for consistency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbsbJqAAoJEFBXWFqHsHzO+ugIAK+TvzV8E39pm6nmAsGusBB9
mxDG1030mIgAvL/d6iZNozqiib93sTwyhEsmvvEWPXrS1WjgYqWRXnILvWqNlf+O
xyBHvfonXNnTLg5mAvppEwQJnLKGstP8ZHlbloQs2imQQp1iw+ZY+9P/UX7zE888
rEkS3NYIEFSwMH9wACOMSDyyCt+gzahTFfDhRseFGaJ1mMsw3+sZnZQKS4R7PSXJ
jw0eXcsGXcL70tUVHpdyvJB2GtiZ0hv3Sl3AeVR/ifW+vsn2zdSK/wTe7YFwmX4i
4nq/xV8sCp+s2wPjXqy0UDpcfWxhRa8eDoqU0O4Sk0W9h4JZVSjhiP4wc+Zqm78=
=+9WB
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers update for 4.20:
- A couple of patches from Anson to update variable and macro naming
in GPCv2 driver, as a preparation of reusing the driver on i.MX8.
- Switch GPC/GPCv2 drivers to use SPDX identifier for licence claiming.
- Clean up the unnecessary DT node name NULL pointer checking from
imx-weim driver, since it can never be NULL at all.
- A couple of improvements on GPC driver from Sven Schmitt to correct
PDN register and use GPC_PGC_DOMAIN_* indexes for consistency.
* tag 'imx-drivers-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpcv2: Switch to SPDX identifier
soc: imx: gpc: Switch to SPDX identifier
bus: imx-weim: drop unnecessary DT node name NULL check
soc: imx: gpcv2: make pgc driver more generic for other i.MX platforms
soc: imx: gpcv2: use A_CORE instread of A7 for more i.MX platforms
soc: imx: gpc: use GPC_PGC_DOMAIN_* indexes
soc: imx: gpc: fix PDN delay
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rx3Z
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.20
* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem
* tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits)
soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
soc: qcom: geni: Make version macros simpler
dt-bindings: firmware: scm: Add MSM8998 and SDM845
firmware: qcom: scm: Refactor clock handling
dt-bindings: firmware: scm: Refactor compatibles and clocks
soc: qcom: smem: a few last cleanups
soc: qcom: smem: verify partition host ids match
soc: qcom: smem: small change in global entry loop
soc: qcom: smem: verify partition offset_free_uncached
soc: qcom: smem: verify partition header size
soc: qcom: smem: introduce qcom_smem_partition_header()
soc: qcom: smem: require order of host ids to match
soc: qcom: smem: verify both host ids in partition header
soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions()
soc: qcom: smem: always ignore partitions with 0 offset or size
soc: qcom: smem: initialize region struct only when successful
soc: qcom: smem: rename variable in qcom_smem_get_global()
drivers: qcom: rpmh-rsc: clear wait_for_compl after use
soc: qcom: rmtfs-mem: Validate that scm is available
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SPS power domain driver is extended for S900 SoC.
This required merging a topic branch for the new bindings header.
-----BEGIN PGP SIGNATURE-----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=W/nr
-----END PGP SIGNATURE-----
Merge tag 'actions-drivers+s900-sps-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers
Actions Semi SoC drivers for v4.20 #2
The SPS power domain driver is extended for S900 SoC.
This required merging a topic branch for the new bindings header.
* tag 'actions-drivers+s900-sps-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
soc: actions: sps: Add S900 power domains
dt-bindings: power: Add Actions Semi S900 SPS
soc: actions: Update SPS help text for S700
soc: actions: Convert to SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The H6 is now supported in our SRAM driver bindings, and we have a small
Makefile change for the SRAM driver to build it without building the
ARCH_SUNXI architecture, especially relevant for the COMPILE_TEST case.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAluviWMACgkQ0rTAlCFN
r3Sx6A//dRNFEnHEfeB6KUFo4pPJUKAZcXq8SpYw9Zx4zoCr2gAYEiuKMSqxLR3x
t2rIBIztoomqxbS2UTfLRKGrrZmi0TNUb9WCkbSsg4/Tbn5fC7kG0g78oEwNwrP9
9bsSL00jFpdQrSalKejf5x1EOqNBfkaBbB7jfPgSpCwZbSH3wwZ7cOr0V2fiVmdC
cD8mdNzgCHnjQti2Vx9lO4BqF1WpdJjmWiuMKaRDqaxnDQDVJYCFwe6NHAkUAfDp
mXoBjDF8end+KoWrjlfos/R2Uh9w3uuFQlHZwwT2f7s8+jbHQ+QpnKhkhgJXTM0i
qhMpGExv10Zs2WhmDhpkIpKETZRTzVL36t8eU3MrBNq5MKWCh1xiv1jK05YM6Myq
pgQfH0/3ljL/fjhvI1NvkmX/0W/ytOMGNHeiv0aNrzm4dtUwzhVl61bLSebMJ9FC
f3VXhpzWDQ325V8Vh/j8guGqnSSJrYMOruaVRPsd7DHy8yOOAqlWRqj4sauExlI5
nJmfhvBo7IVxtpb8DJNALviFCnuJuAAtB2q0jvWxq+XlKCOymwSnR/Q2eIQeLcgM
AzkwCW/9Oa/YpYc5/aaUb9PoEfKBGS/kczM1BQf5dqoNyXnkwa0BnOKqCKK1k8W1
I7T/Q71JkPll5PlIPyclMurv118cXuRyXAKXQvbXNFgytVdQsRk=
=Ar/W
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers
Allwinner drivers changes for 4.20
The H6 is now supported in our SRAM driver bindings, and we have a small
Makefile change for the SRAM driver to build it without building the
ARCH_SUNXI architecture, especially relevant for the COMPILE_TEST case.
* tag 'sunxi-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
dt-bindings: sunxi-sram: add binding for Allwinner H6 SRAM C
drivers: soc: Allow building the sunxi driver without ARCH_SUNXI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX8MQ and i.MX8MM share same gpc module with i.MX7D, they
can reuse gpcv2 pgc driver for power domain control, this
patch renames all functions and structure definitions started
with "imx7" to "imx", and use .data in imx_gpcv2_dt_ids[] to
pass platform specific power domain data for power domain
driver, thus make gpcv2 pgc driver more generic for i.MX
platforms.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
gpcv2 driver is NOT just used on i.MX7D which has Cortex-A7
cores, but also on i.MX8MQ/i.MX8MM platforms which use Cortex-A53
cores, so let's use A_CORE instread of A7 to avoid confusion.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This contains a pinctrl implementation for the pad configuration that
can be controlled from the PMC.
-----BEGIN PGP SIGNATURE-----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=iZ7v
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
soc/tegra: Changes for v4.20-rc1
This contains a pinctrl implementation for the pad configuration that
can be controlled from the PMC.
* tag 'tegra-for-4.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Implement pad configuration via pinctrl
soc/tegra: pmc: Remove public pad voltage APIs
soc/tegra: pmc: Use X macro to generate IO pad tables
soc/tegra: pmc: Implement tegra_io_pad_is_powered()
soc/tegra: pmc: Factor out DPD register bit calculation
soc/tegra: pmc: Fix pad voltage configuration for Tegra186
soc/tegra: pmc: Fix child-node lookup
dt-bindings: Add Tegra PMC pad configuration bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a couple of new APIs to check the probing status of qman and bman:
'int bman_is_probed()' and 'int qman_is_probed()'.
They return the following values.
* 1 if qman/bman were probed correctly
* 0 if qman/bman were not yet probed
* -1 if probing of qman/bman failed
Drivers that use qman/bman driver services are required to use these
APIs before calling any functions exported by qman or bman drivers
or otherwise they will crash the kernel.
The APIs will be used in the following couple of qbman portal patches
and later in the series in the dpaa1 ethernet driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
There is a copy and paste bug so we accidentally use the RX_ shift when
we're in TX_ mode.
Fixes: bb8b2062af ("fsl/qe: setup clock source for TDM mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
(cherry picked from commit 3cb31b634052ed458922e0c8e2b4b093d7fb60b9)
Signed-off-by: Olof Johansson <olof@lixom.net>
If the qman driver didn't probe, calling qman_alloc_fqid_range,
qman_alloc_pool_range or qman_alloc_cgrid_range (as done in dpaa_eth) will
pass a NULL pointer to gen_pool_alloc, leading to a NULL pointer
dereference.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
(cherry picked from commit f72487a2788aa70c3aee1d0ebd5470de9bac953a)
Signed-off-by: Olof Johansson <olof@lixom.net>
MT6357 is a new power management IC and it is used for mt6765 SoCs.
To define mt6357_regs for pmic register mapping and pmic_mt6357
for accessing register.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
mt6765 is a highly integrated SoCs, it uses mt6357 for power management.
This patch adds pwrap driver to access mt6357. Pwrap of mt6765 support
dynamic priority meichanism, sequence monitor and starvation mechanism
to make transaction more reliable.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
[mb: change has_bridge to capabilities]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Return statements in functions returning bool should use true or false
instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT6358 is a new power management IC and it is used for
mt8183 SoCs. To define mt6358_regs for pmic register
mapping and pmic_mt6358 for accessing register.
Adding one more interrupt and wdt source.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Use group of bits for pwrap capability instead of
elements of structure.
This patch is preparing for adding mt8183 pwrap support.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Order SoC and PMIC numbers ascending to make the code more
readable.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Trivial fix to spelling mistake in dev_err messages and comments
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The geni_se_clk_freq_match() has some strange semantics. Specifically
it is defined with two modes:
1. It can find a clock that's an exact multiple of the requested rate
2. It can find a non-exact match but it can't handle multiples then
...but callers should always be able to handle a clock that is a
multiple of the requested clock so mode #2 doesn't really make sense.
Let's change the semantics so that the non-exact match can also accept
multiples and then change the code to handle that.
The only caller of this code is the unlanded SPI driver [1] which
currently passes "exact = True", thus it should be safe to change the
semantics in this way. ...and, in fact, the SPI driver should likely
be modified to pass "exact = False" (with the new semantics) since
that will allow it to work with SPI devices that request a clock rate
that doesn't exactly match a rate we can make.
[1] https://lkml.kernel.org/r/1535107336-2214-1-git-send-email-dkota@codeaurora.org
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The function clk_round_rate() is defined to return a "long", not an
"unsigned long". That's because it might return a negative error
code. Change the call in geni_se_clk_tbl_get() to check for errors.
While we're at it, get rid of a useless init of "freq".
NOTE: overall the idea that we should iterate over clk_round_rate() to
try to reconstruct a table already present in the clock driver is
questionable. Specifically:
- This method relies on "clk_round_rate()" rounding up.
- This method only works if the table is sorted and has no duplicates.
...this patch doesn't try to fix those problems, it just makes the
error handling more correct.
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Commit 3ad85b08f7 (soc: actions: sps: Add S700)
added S700 support to the SPS driver but forget to update Kconfig help.
Add missing S700 mention, in preparation for further SoCs.
Fixes: 3ad85b08f7 ("soc: actions: sps: Add S700")
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace textual license notices with SPDX-License-Identifier lines.
Add an SPDX-License-Identifier for the Makefile.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This commit adds back functions removed in
commit a211c8170b ("staging: fsl-mc/dpio: remove couple of unused functions")
since dpseci object will make use of them.
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for RZ/G1N (R8A7744) SoC power areas to the R-Car SYSC driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for the RZ/G2E (R8A774C0) SoC power areas to the
R-Car SYSC driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch contains several small cleanups:
- In qcom_smem_enumerate_partitions(), change the "local_host"
argument to have 16 bit unsigned type
- Also in qcom_smem_enumerate_partitions(), change the type of
the "host0" and "host1" local variables to be u16
- Fix error messages reporting host ids to use the right format
specifier
- Shorten the error messages as well, to fit on one line
- Add a compile-time check to ensure the local host value passed
to qcom_smem_enumerate_partitions() is in range
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add verification in qcom_smem_partition_header() that the host ids
found in a partition's header structure match those in its partition
table entry.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Change the logic in the loop that finds that global host entry in
the partition table not require the host0 and host1 local variables.
The next patch will remove them.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add verification in qcom_smem_partition_header() that the
offset_free_uncached field in a partition's header structure does
not exceed the partition's size.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add verification in qcom_smem_partition_header() that the size in a
partition's header structure matches the size in its partition table
entry.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Create a new function qcom_smem_partition_header() to encapsulate
validating locating a partition header and validating information
found within it. This will be built up over a few commits to make
it more obvious how the common function is replacing duplicated code
elsewhere. Initially it just verifies the header has the right
magic number.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In qcom_smem_enumerate_partitions(), we find all partitions that
have a given local host id in either its host0 or its host1 field
in the partition table entry. We then verify that the header
structure at the start of each partition also contains the same two
host ids as is found in the table of contents.
There is no requirement that the order of the two host ids be the
same in the table of contents and in the partition header.
This patch changes that, requiring host0 to in the partition table
entry to equal host0 in the partition header structure (and similar
for the host1 values).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The global partition is indicated by having both host values in its
table of contents entry equal SMEM_GLOBAL_HOST=0xfffe.
In qcom_smem_set_global_partition(), we check whether the header
structure at the beginning of the partition contains that host
value, but the check only verifies *one* of them. Change the check
so the partition header must have SMEM_GLOBAL_HOST for *both* its
host fields.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Combine the code that checks whether a partition table entry is
associated with the local host with the assignment of the remote
host id value.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In qcom_smem_enumerate_partitions(), any partition table entry
having a zero offset or size field is ignored. Move those checks
earlier in the loop, because there's no sense in examining the
host fields for those entries.
Add the same checks in qcom_smem_set_global_partition(), so the
scan for the global partition skips over these invalid entries.
This allows a later check for zero size or offset once the global
entry is found to be eliminated.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Hold off initializing anything for the array entry representing a
memory region in qcom_smem_map_memory() until we know we've
successfully mapped it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Rename the variable "area" to be "region" in qcom_smem_get_global(),
so its name better matches its type.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The wait_for_compl register ensures the request sequence is maintained
when sending requests from the TCS. Clear the register after sending
active request and during invalidate of the sleep and wake TCS.
Reported-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The scm device must be present in order for the rmtfs driver to
configure memory permissions for the rmtfs memory region, so check that
it is probed before continuing.
Cc: stable@vger.kernel.org
Fixes: fa65f80451 ("soc: qcom: rmtfs-mem: Add support for assigning memory to remote")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Check for SCM availability before attempting to use SPM. SPM probe will
fail otherwise.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Since commit cab673583d ("soc: Unconditionally include qcom Makefile"),
we unconditionally include the soc/qcom/Makefile.
This opens up the possibility to compile test the code even when building
for other architectures.
Allow COMPILE_TEST for all qcom SoC Kconfigs, except for two Kconfigs
that depend on QCOM_SCM, since that triggers lots of build errors in
qcom_scm.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
'adev->name' is used as a NUL-terminated string, but using strncpy() with the
length equal to the buffer size may result in lack of the termination:
In function 'apr_add_device',
inlined from 'of_register_apr_devices' at drivers//soc/qcom/apr.c:264:7,
inlined from 'apr_probe' at drivers//soc/qcom/apr.c:290:2:
drivers//soc/qcom/apr.c:222:3: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(adev->name, np->name, APR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This changes it to use the safer strscpy() instead.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
'chinfo.name' is used as a NUL-terminated string, but using strncpy() with
the length equal to the buffer size may result in lack of the termination:
drivers//soc/qcom/wcnss_ctrl.c: In function 'qcom_wcnss_open_channel':
drivers//soc/qcom/wcnss_ctrl.c:284:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(chinfo.name, name, sizeof(chinfo.name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This changes it to use the safer strscpy() instead.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
QCOM_RPHM already selects ARM64, which always selects OF.
Additionally, the rpmh driver only uses linux/of.h, which has dummy
definitions for all functions, in order for code to to be able to
build without CONFIG_OF set.
Remove the superfluous depends on OF.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Since we are using irq_domain_add_linear(), add a select on IRQ_DOMAIN.
This is needed in order to be able to remove the depends on ARCH_QCOM.
drivers/soc/qcom/smsm.c: In function ‘smsm_inbound_entry’:
drivers/soc/qcom/smsm.c:411:18: error: implicit declaration of function
‘irq_domain_add_linear’
entry->domain = irq_domain_add_linear(node, 32, &smsm_irq_ops, entry);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Since we are using irq_domain_add_linear(), add a select on IRQ_DOMAIN.
This is needed in order to be able to remove the depends on ARCH_QCOM.
drivers/soc/qcom/smp2p.c: In function ‘qcom_smp2p_inbound_entry’:
drivers/soc/qcom/smp2p.c:317:18: error: implicit declaration of function
‘irq_domain_add_linear’
entry->domain = irq_domain_add_linear(node, 32, &smp2p_irq_ops, entry);
^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Trivial fix to spelling mistake in dev_err message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The geni_se_clk_freq_match() has some strange semantics. Specifically
it is defined with two modes:
1. It can find a clock that's an exact multiple of the requested rate
2. It can find a non-exact match but it can't handle multiples then
...but callers should always be able to handle a clock that is a
multiple of the requested clock so mode #2 doesn't really make sense.
Let's change the semantics so that the non-exact match can also accept
multiples and then change the code to handle that.
The only caller of this code is the unlanded SPI driver [1] which
currently passes "exact = True", thus it should be safe to change the
semantics in this way. ...and, in fact, the SPI driver should likely
be modified to pass "exact = False" (with the new semantics) since
that will allow it to work with SPI devices that request a clock rate
that doesn't exactly match a rate we can make.
[1] https://lkml.kernel.org/r/1535107336-2214-1-git-send-email-dkota@codeaurora.org
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The function clk_round_rate() is defined to return a "long", not an
"unsigned long". That's because it might return a negative error
code. Change the call in geni_se_clk_tbl_get() to check for errors.
While we're at it, get rid of a useless init of "freq".
NOTE: overall the idea that we should iterate over clk_round_rate() to
try to reconstruct a table already present in the clock driver is
questionable. Specifically:
- This method relies on "clk_round_rate()" rounding up.
- This method only works if the table is sorted and has no duplicates.
...this patch doesn't try to fix those problems, it just makes the
error handling more correct.
Fixes: eddac5af06 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cache error reporting controller detects and reports single and
double bit errors on Last Level Cache Controller (LLCC) cache.
Add required support to register LLCC EDAC driver as platform driver,
from LLCC driver.
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Currently, broadcast base is set to end of the LLCC banks, which may
not be correct always. As the number of banks may vary for each chipset
and the broadcast base could be at a different address as well. This info
depends on the chipset, so get the broadcast base info from the device
tree (DT). Add broadcast base in LLCC driver and use this for broadcast
writes.
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Amlogic SoCs have a repository of 256 canvas which they use to
describe pixel buffers.
They contain metadata like width, height, block mode, endianness [..]
Many IPs within those SoCs like vdec/vpu rely on those canvas to read/write
pixels.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This makes it possible to build the sunxi SRAM driver without building
for the sunxi architecture. This allows selecting the driver when
building the kernel in testing environments.
In particular, this is necessary for testing of the Cedrus driver, that
selects the sunxi SRAM driver.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add support for identifying the RZ/G2E (r8a774c0) SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for RZ/G2M (R8A774A1) SoC power areas to the R-Car SYSC
driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
imx6_pm_domain_power_off() reads iso and iso2sw from GPC_PGC_PUPSCR_OFFS
which stores the power up delays.
So use GPC_PGC_PDNSCR_OFFS for the correct delays.
Signed-off-by: Sven Schmitt <sven.schmitt@mixed-mode.de>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pointer 'priv' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
variable 'priv' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the of_get_child_by_name() helper instead of open coding searching
for the 'firmware' child node. This removes directly accessing the name
pointer as well.
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add support for identifying the RZ/A2M (R7S9210) SoC.
Also add support for reading the BSID register which is a different format
than the PRR.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds support for identifying the RZ/G2M (r8a774a1) SoC.
It corrects the original RZ/G SoC family name to RZ/G1 and also
adds support for the new RZ/G2 SoC family.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Register a pinctrl device and implement get and set functions for
PIN_CONFIG_LOW_POWER_MODE and PIN_CONFIG_POWER_SOURCE parameters.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make tegra_io_pad_set_voltage() and tegra_io_pad_get_voltage() static
and remove the prototypes from pmc.h. Remove enum tegra_io_pad_voltage
and use the defines from <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
instead.
These functions aren't used outside of the pmc driver and new use cases
should use the pinctrl interface instead.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Refactor the IO pad tables into macro tables so that they can be reused
to generate pinctrl pin descriptors. Also add a name field which is
needed by pinctrl.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement a function to query whether a pad is in deep power down mode.
This is needed by the pinctrl callbacks.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Factor out the the code to calculate the correct DPD register and bit
number for a given pad. This logic will be needed to query the status
register.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement support for the PMC_IMPL_E_33V_PWR register which replaces
PMC_PWR_DET register interface of the SoC generations preceding
Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[]
table and the AO_HV pad.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.
To make things worse, the parent pmc node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Fixes: 3568df3d31 ("soc: tegra: Add thermal reset (thermtrip) support to PMC")
Cc: stable <stable@vger.kernel.org> # 4.0
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board types.
New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and
PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).
New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop
In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor variants
of boards/platforms.
-----BEGIN PGP SIGNATURE-----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=J0qC
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board
types.
New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
and PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).
New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop
In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor
variants of boards/platforms"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
arm64: dts: sdm845: Add tsens nodes
arm64: dts: msm8996: thermal: Initialise via DT and add second controller
arm64: dts: sprd: Add one suspend timer
arm64: dts: sprd: Add SC27XX ADC device
arm64: dts: sprd: Add SC27XX eFuse device
arm64: dts: sprd: Add SC27XX vibrator device
arm64: dts: sprd: Add SC27XX breathing light controller device
arm64: dts: meson-axg: add spdif-dit codec
arm64: dts: meson-axg: add lineout codec
arm64: dts: meson-axg: add linein codec
arm64: dts: meson-axg: add tdm interfaces
arm64: dts: meson-axg: add tdmout formatters
arm64: dts: meson-axg: add tdmin formatters
arm64: dts: meson-axg: add spdifout
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
ARM: dts: aspeed: Add coprocessor interrupt controller
arm64: dts: meson-axg: add audio arb reset controller
arm64: dts: meson-axg: add usb power regulator
...
Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC
-----BEGIN PGP SIGNATURE-----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=ZjwY
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
soc: sunxi: Add the A13, A23 and H3 system control compatibles
reset: uniphier: add reset control support for SPI
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
soc: mediatek: pwrap: fix cipher init setting error
dt-bindings: pwrap: mediatek: add pwrap support for MT6797
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
...
Most of the SoC updates in this cycle are cleanups and moves to more
modern infrastructure:
- Davinci was moved to common clock framework
- OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
keyboard interface (bitbanged AT keyboard via GPIO).
- Removal of some stale code for Renesas platforms
- Power management improvements for i.MX6LL
-----BEGIN PGP SIGNATURE-----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=ACVk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 32-bit SoC platform updates from Olof Johansson:
"Most of the SoC updates in this cycle are cleanups and moves to more
modern infrastructure:
- Davinci was moved to common clock framework
- OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
keyboard interface (bitbanged AT keyboard via GPIO).
- Removal of some stale code for Renesas platforms
- Power management improvements for i.MX6LL"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits)
ARM: uniphier: select RESET_CONTROLLER
arm64: uniphier: select RESET_CONTROLLER
ARM: uniphier: remove empty Makefile
ARM: exynos: Clear global variable on init error path
ARM: exynos: Remove outdated maintainer information
ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
soc: r9a06g032: don't build SMP files for non-SMP config
ARM: shmobile: Add the R9A06G032 SMP enabler driver
ARM: at91: pm: configure wakeup sources for ULP1 mode
ARM: at91: pm: add PMC fast startup registers defines
ARM: at91: pm: Add ULP1 mode support
ARM: at91: pm: Use ULP0 naming instead of slow clock
ARM: hisi: handle of_iomap and fix missing of_node_put
ARM: hisi: check of_iomap and fix missing of_node_put
ARM: hisi: fix error handling and missing of_node_put
ARM: mx5: Set the DBGEN bit in ARM_GPC register
ARM: imx51: Configure M4IF to avoid visual artifacts
ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll
ARM: imx: fix i.MX6SLL build
...
This adds support for pre-start and post-shutdown hooks for remoteproc
subdevices, refactors the Qualcomm Hexagon support to allow reuse
between several drivers, makes authentication in the MDT file loader
optional, migrates a few format strings to use %pK and migrates the
Davinci driver to use the reset framework.
-----BEGIN PGP SIGNATURE-----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=QpCe
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for pre-start and post-shutdown hooks for remoteproc
subdevices, refactors the Qualcomm Hexagon support to allow reuse
between several drivers, makes authentication in the MDT file loader
optional, migrates a few format strings to use %pK and migrates the
Davinci driver to use the reset framework"
* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
remoteproc/davinci: use the reset framework
remoteproc/davinci: Mark error recovery as disabled
remoteproc: st_slim: replace "%p" with "%pK"
remoteproc: replace "%p" with "%pK"
remoteproc: qcom: fix Q6V5_WCSS dependencies
remoteproc: Reset table_ptr in rproc_start() failure paths
remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
remoteproc: qcom q6v5: fix modular build
remoteproc: Introduce prepare and unprepare for subdevices
remoteproc: rename subdev probe and remove functions
remoteproc: Make client initialize ops in rproc_subdev
remoteproc: Make start and stop in subdev optional
remoteproc: Rename subdev functions to start/stop
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
remoteproc: qcom: adsp: Use common q6v5 helpers
remoteproc: q6v5: Extract common resource handling
remoteproc: qcom: mdt_loader: Make the firmware authentication optional
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal
driver (Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic
scaling governors on systems with many CPUs to avoid
scalability issues with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq
driver (Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes
(from Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures
in the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS
1025C laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in
the devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=kv2M
-----END PGP SIGNATURE-----
Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new framework for CPU idle time injection, to be used by
all of the idle injection code in the kernel in the future, fix some
issues and add a number of relatively small extensions in multiple
places.
Specifics:
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory
CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal driver
(Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic scaling
governors on systems with many CPUs to avoid scalability issues
with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
(Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes (from
Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures in
the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS 1025C
laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in the
devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring)"
* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
cpufreq: intel_pstate: Ignore turbo active ratio in HWP
cpufreq: Fix a circular lock dependency problem
cpu/hotplug: Add a cpus_read_trylock() function
x86/power/hibernate_64: Remove VLA usage
cpufreq: trace frequency limits change
cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
cpufreq: armada-37xx: Add AVS support
dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
PM / devfreq: Init user limits from OPP limits, not viceversa
PM / devfreq: rk3399_dmc: fix spelling mistakes.
PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
dt-bindings: clock: add rk3399 DDR3 standard speed bins.
...
Merge changes in the PM core, system-wide PM infrastructure, generic
power domains (genpd) framework, ACPI PM infrastructure and cpuidle
for 4.19.
* pm-core:
driver core: Add flag to autoremove device link on supplier unbind
driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER
* pm-domains:
PM / Domains: Introduce dev_pm_domain_attach_by_name()
PM / Domains: Introduce option to attach a device by name to genpd
PM / Domains: dt: Add a power-domain-names property
* pm-sleep:
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
x86/power/hibernate_64: Remove VLA usage
PM / hibernate: cast PAGE_SIZE to int when comparing with error code
* acpi-pm:
ACPI / PM: save NVS memory for ASUS 1025C laptop
ACPI / PM: Default to s2idle in all machines supporting LP S0
* pm-cpuidle:
ARM: cpuidle: silence error on driver registration failure
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9CHI
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers
Various updates to soc/fsl for 4.19
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
Signed-off-by: Olof Johansson <olof@lixom.net>
There's been work for this release cycles in both the SRAM controller
driver in order to support more SoCs, as part of our VPU work, but also to
enable the EMAC on the A64 (that needs to poke at registers within the same
register space).
Some work has been needed too to represent the bus to the display engine
controllers that all need an SRAM to be mapped to the CPU to be able to
access those controllers' registers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAltXJkEACgkQ0rTAlCFN
r3R00g/8CkjHrlXejLLTxjMGdVQYnmgVL3wPBbXaqi6wtg/ATLpXN5b5m+CbRZEJ
cMyY4LVYMbmQ1aLwAUNlDzNbv5vxR5tYJ9X3x63wf1AlFPEwwOO0sy17yZp2J8Rx
FFHx/dciQPbXkbOyIF+P+b49rO7gQ1dsbl5UyEA6nfeVmbPyeamwUdYy2559fkb1
3yWyTTUbXoEsDrKjuRf+tVdDr2ssTDqmT3qFTgl2jHZ5Bbyzq2aBH0NLBlk3G1te
v4ceHRue/guEkjYnVEtIezhJMUwaDZcL5zuuRDINbT609mAMkO9he1Dz5BcvYe00
Rt5h304Nt6JSOM5iEDYnh1mzvdflm3ZR12/TTyxtmGVNB9PxVEj8z/0lT4rLOC7I
H5uNxbM5eM6GQKQou+W8OXRPyuKJ8PXWWk58ajf0knMuIBcYOU0tdrFrWcPxaFXK
VScPibv7NEs7np3mKc32L0WmsgHrfMK9mmgvFZFfhAgYM6oHM356bo+Jawrn3aJY
aL/MQ3+rxjQBwUeNbZDnt4ROoM0hYUYt2s5dNiYY8sfhy37fwZz1Vrg810MLQLTA
q/5VB7dEHGVQNZaYToo7RVegre3bMsYzG0DdZCKyZKaknJjH4hC67yOd5vD8wpMH
WMCHx+s/3A0S/BRNjstV2UNFZfsJN8BHUDC/aYda1TJc9cbvSAo=
=NuX/
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers
Allwinner drivers changes for 4.19
There's been work for this release cycles in both the SRAM controller
driver in order to support more SoCs, as part of our VPU work, but also to
enable the EMAC on the A64 (that needs to poke at registers within the same
register space).
Some work has been needed too to represent the bus to the display engine
controllers that all need an SRAM to be mapped to the CPU to be able to
access those controllers' registers.
* tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
soc: sunxi: Add the A13, A23 and H3 system control compatibles
drivers: soc: sunxi: Add support for the C1 SRAM region
dt-bindings: sram: sunxi: Populate valid sections compatibles
dt-bindings: sram: sunxi: Add A13, A20, A23 and H3 dedicated bindings
soc: sunxi: sram: Add dt match for the A10 system-control compatible
dt-bindings: sram: sunxi: Introduce new A10 binding for system-control
bus: add bus driver for accessing Allwinner A64 DE2
dt-bindings: add binding for the Allwinner A64 DE2 bus
soc: sunxi: sram: Add updated compatible string for A64 system control
dt-bindings: sram: Rename A64 SRAM controller compatible
soc: sunxi: export a regmap for EMAC clock reg on A64
Signed-off-by: Olof Johansson <olof@lixom.net>
Convert the Datapath I/O documentation to .rst format
and move to the Documation/networking/dpaa2 directory
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.
The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This cousin to gpio-mpc8xxx was lacking a multiple pins method,
add one.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
-----BEGIN PGP SIGNATURE-----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=pkLC
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
TI AM654 support for v4.19 merge window
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
* tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: Add support for AM654 EVM base board
soc: ti: Add Support for AM654 SoC config option
arm64: dts: ti: Add Support for AM654 SoC
arm64: Add support for TI's K3 Multicore SoC architecture
dt-bindings: arm: ti: Add bindings for AM654 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
- Handle i.MX6SL chip errata ERR006287 in the safest possible way by
keeping the DISP domain always-on, because Upon resuming from power
gating, the modules in the display power domain (eLCDIF, EPDC, PXP
and SPDC) might fail to perform register reads correctly.
- Use GENPD_FLAG_ALWAYS_ON flag for i.MX6QP PU ERR009619 handling.
It is functionally identical to the exsiting implementation but
simpler and slightly faster.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbUaVMAAoJEFBXWFqHsHzOOWsH/2hLUZXFrxFeXrp2k1WpJCIz
PHpPfgiRTwYDb/79xo1kGJMZ2sB+q129E51zRzK/CeBNhkr04VRisP1SsnLED4OT
1jCI4Ji7rMhfY37b8mtPbXEM+bue0B5FKjrzixp49XelWEK2o4/ESojrRFnh9jgL
p7lYD7YcHCXiRkB3KIPNGC/cGYRvsQOfGHMIfMY52RDLlBPPc+BRFInHLiBUdQaM
9hMu886r3mg3HHuCpyNiKb6OAQuJiRo8Ukj13apqO48/VgAnxG06x7MbMI2v94wC
XudqthIeRnrpK/jl2AXIbgtTUuwH8Yh9NHUePHuIspdJV6wXdZr55IPgPJjsg3Q=
=yFeo
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers update for 4.19:
- Handle i.MX6SL chip errata ERR006287 in the safest possible way by
keeping the DISP domain always-on, because Upon resuming from power
gating, the modules in the display power domain (eLCDIF, EPDC, PXP
and SPDC) might fail to perform register reads correctly.
- Use GENPD_FLAG_ALWAYS_ON flag for i.MX6QP PU ERR009619 handling.
It is functionally identical to the exsiting implementation but
simpler and slightly faster.
* tag 'imx-drivers-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: imx: gpc: Disable 6sl display power gating for ERR006287
Signed-off-by: Olof Johansson <olof@lixom.net>
* Always enable ARCH_TIMER on SoCs with A7 or A15
All such SoCs have ARCH_TIMER so there is no need for it to be optional.
This allows clean-up which is included in this change.
* Do not compile r8a7779_platform_cpu_kill when it is unused
This avoids a warning by shuffling code into an existing #ifdef
r8a7779 is the R-Car H1 SoC
* Add SMP enabler driver for the RZ/N1D (r9a06g032) SoC
This is to allow SMP to be enabled via DT on the r9a06g032
* Stop compiling headsmp-apmu for non-SMP configs
This is a minor clean-up allowing removal of an #ifdef
-----BEGIN PGP SIGNATURE-----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=LXu6
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.19
* Always enable ARCH_TIMER on SoCs with A7 or A15
All such SoCs have ARCH_TIMER so there is no need for it to be optional.
This allows clean-up which is included in this change.
* Do not compile r8a7779_platform_cpu_kill when it is unused
This avoids a warning by shuffling code into an existing #ifdef
r8a7779 is the R-Car H1 SoC
* Add SMP enabler driver for the RZ/N1D (r9a06g032) SoC
This is to allow SMP to be enabled via DT on the r9a06g032
* Stop compiling headsmp-apmu for non-SMP configs
This is a minor clean-up allowing removal of an #ifdef
* tag 'renesas-arm-soc2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
soc: r9a06g032: don't build SMP files for non-SMP config
ARM: shmobile: Add the R9A06G032 SMP enabler driver
ARM: shmobile: rcar-gen2: Stop compiling headsmp-apmu on !SMP
Signed-off-by: Olof Johansson <olof@lixom.net>
Make sure to set the mem device release callback before calling
put_device() in a couple of probe error paths so that the containing
object also gets freed.
Fixes: d1de6d6c63 ("soc: qcom: Remote filesystem memory driver")
Cc: stable <stable@vger.kernel.org> # 4.15
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add missing MODULE_LICENSE().
According to the SPDX-License-Identifier, the license is GPL v2.
Fixes the following warning:
WARNING: modpost: missing MODULE_LICENSE() in drivers/soc/qcom/llcc-slice.o
Fixes: a3134fb ("drivers: soc: Add LLCC driver")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The patch fixes the bug reported by Dan Carpenter.
It removes the unnecessary err check for ‘tcs’ reported by
static checker warning:
drivers/soc/qcom/rpmh-rsc.c:111 tcs_invalidate()
warn: 'tcs' isn't an ERR_PTR
See also:
drivers/soc/qcom/rpmh-rsc.c:178 get_tcs_for_msg() warn: 'tcs' isn't
an ERR_PTR
drivers/soc/qcom/rpmh-rsc.c:180 get_tcs_for_msg() warn: 'tcs' isn't
an ERR_PTR
https://www.spinics.net/lists/linux-soc/msg04624.html
Fixes: 9a3afcf ("drivers: qcom: rpmh-rsc: allow invalidation
of sleep/wake TCS")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
get_req_from_tcs introduced in patch[1] returns tcs_request from
tcs_group. The size of tcs (of type - tcs_group) array in rsc_drv is
TCS_TYPE_NR. So the loop index needs to be iterated up to TCS_TYPE_NR only.
[1] https://patchwork.kernel.org/patch/10477547/
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Children of RPMh will need access to cmd_db. Rather than having each
child have code to check if cmd_db is ready let's add the check to
RPMh.
With this we'll be able to remove this boilerplate code from
clk-rpmh.c and qcom-rpmh-regulator.c. Neither of these files has
landed upstream yet but patches are pretty far along.
===
This code is based upon v11 of Lina and Raju's RPMh series.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Some RSCs may only have sleep and wake TCS, i.e, there is no dedicated
TCS for active mode request, but drivers may still want to make active
requests from these RSCs. In such cases re-purpose the wake TCS to send
active state requests.
The requirement for this is that the driver is aware that the wake TCS
is being repurposed to send active request, hence the sleep and wake
TCSes be invalidated before the active request is sent.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Platform drivers need make a lot of resource state requests at the same
time, say, at the start or end of an usecase. It can be quite
inefficient to send each request separately. Instead they can give the
RPMH library a batch of requests to be sent and wait on the whole
transaction to be complete.
rpmh_write_batch() is a blocking call that can be used to send multiple
RPMH command sets. Each RPMH command set is set asynchronously and the
API blocks until all the command sets are complete and receive their
tx_done callbacks.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Platform drivers that want to send a request but do not want to block
until the RPMH request completes have now a new API -
rpmh_write_async().
The API allocates memory and send the requests and returns the control
back to the platform driver. The tx_done callback from the controller is
handled in the context of the controller's thread and frees the
allocated memory. This API allows RPMH requests from atomic contexts as
well.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Active state requests are sent immediately to the RSC controller, while
sleep and wake state requests are cached in this driver to avoid taxing
the RSC controller repeatedly. The cached values will be sent to the
controller when the rpmh_flush() is called.
Generally, flushing is a system PM activity and may be called from the
system PM drivers when the system is entering suspend or deeper sleep
modes during cpuidle.
Also allow invalidating the cached requests, so they may be re-populated
again.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[rplsssn: remove unneeded semicolon, address line over 80chars error]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Allow sleep and wake commands to be cleared from the respective TCSes,
so that they can be re-populated.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sleep and wake requests are sent when the application processor
subsystem of the SoC is entering deep sleep states like in suspend.
These requests help lower the system power requirements when the
resources are not in use.
Sleep and wake requests are written to the TCS slots but are not
triggered at the time of writing. The TCS are triggered by the firmware
after the last of the CPUs has executed its WFI. Since these requests
may come in different batches of requests, it is the job of this
controller driver to find and arrange the requests into the available
TCSes.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sending RPMH requests and waiting for response from the controller
through a callback is common functionality across all platform drivers.
To simplify drivers, add a library functions to create RPMH client and
send resource state requests.
rpmh_write() is a synchronous blocking call that can be used to send
active state requests.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Log sent RPMH requests and interrupt responses in FTRACE.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[rplsssn@codeaurora.org: rebase to v4.18-rc1 & fix merge conflict]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add controller driver for QCOM SoCs that have hardware based shared
resource management. The hardware IP known as RSC (Resource State
Coordinator) houses multiple Direct Resource Voter (DRV) for different
execution levels. A DRV is a unique voter on the state of a shared
resource. A Trigger Control Set (TCS) is a bunch of slots that can house
multiple resource state requests, that when triggered will issue those
requests through an internal bus to the Resource Power Manager Hardened
(RPMH) blocks. These hardware blocks are capable of adjusting clocks,
voltages, etc. The resource state request from a DRV are aggregated
along with state requests from other processors in the SoC and the
aggregate value is applied on the resource.
Some important aspects of the RPMH communication -
- Requests are <addr, value> with some header information
- Multiple requests (upto 16) may be sent through a TCS, at a time
- Requests in a TCS are sent in sequence
- Requests may be fire-n-forget or completion (response expected)
- Multiple TCS from the same DRV may be triggered simultaneously
- Cannot send a request if another request for the same addr is in
progress from the same DRV
- When all the requests from a TCS are complete, an IRQ is raised
- The IRQ handler needs to clear the TCS before it is available for
reuse
- TCS configuration is specific to a DRV
- Platform drivers may use DRV from different RSCs to make requests
Resource state requests made when CPUs are active are called 'active'
state requests. Requests made when all the CPUs are powered down (idle
state) are called 'sleep' state requests. They are matched by a
corresponding 'wake' state requests which puts the resources back in to
previously requested active state before resuming any CPU. TCSes are
dedicated for each type of requests. Active mode TCSes (AMC) are used to
send requests immediately to the resource, while control TCS are used to
provide specific information to the controller. Sleep and Wake TCS send
sleep and wake requests, after and before the system halt respectively.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
LLCC (Last Level Cache Controller) provides additional cache memory
in the system. LLCC is partitioned into multiple slices and each
slice gets its own priority, size, ID and other config parameters.
LLCC driver programs these parameters for each slice. Clients that
are assigned to use LLCC need to get information such size & ID of the
slice they get and activate or deactivate the slice as needed. LLCC driver
provides API for the clients to perform these operations.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The moved check for the global partition ended up in the wrong place and I
failed to spot this in my review. This moves it to the correct place.
Fixes: 11d2e7edac ("soc: qcom: smem: check sooner in qcom_smem_set_global_partition()")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Without CONFIG_SMP, we get a build failure:
In file included from include/linux/byteorder/little_endian.h:5,
from arch/arm/include/uapi/asm/byteorder.h:22,
from include/asm-generic/bitops/le.h:6,
from arch/arm/include/asm/bitops.h:342,
from include/linux/bitops.h:18,
from include/linux/kernel.h:11,
from include/asm-generic/bug.h:18,
from arch/arm/include/asm/bug.h:60,
from include/linux/bug.h:5,
from include/linux/io.h:23,
from drivers/soc/renesas/r9a06g032-smp.c:11:
drivers/soc/renesas/r9a06g032-smp.c: In function 'r9a06g032_smp_boot_secondary':
drivers/soc/renesas/r9a06g032-smp.c:43:21: error: 'secondary_startup' undeclared (first use in this function)
writel(__pa_symbol(secondary_startup), cpu_bootaddr);
^~~~~~~~~~~~~~~~~
This makes the compilation of that file conditional on SMP support.
It would probably be better for consistency to leave that file
in arch/arm/mach-shmobile/, matching what we do for all other smp
operations.
Fixes: cde4f86f9249 ("arm: shmobile: Add the R9A06G032 SMP enabler driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas R9A06G032 second CA7 is parked in a ROM pen at boot time, it
equires a special enable method to get it started.
Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
- Restrict GPC driver on register range that is accessible by regmap,
so that we can avoid user space from triggering imprecise external
abort exception.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbUD1eAAoJEFBXWFqHsHzOdR4IALmrzHZHPLKzfPmQitoO3c/E
qCcM8kAOoEPg9toIj3Gkte3XCRS7+gYaPhwvtJ48n3x0zcB7mSs/PhiKbpF+e/gK
/4w6iDoeqhkb+ITcn1qeM8OpsYhDV5FF2NLsoKjQmOhVts9yg/JUwMP4nTIElOM5
cAEAzCM/RCkZjte8NWDgculB2Wre/AsNEiSlVU8p3uZl8UY30BDnvMmlQ1eewSsi
gARfkI49AEQJZVIO9LClGRmkg1NMDnPGM1Bh0tUWMX7UhvPfO97VfshJtVklDi26
o29rC6nmLV7D/jfpWbcEKuVAXkOuRFf/3h8Wi4hN1577L1V0l+ABNhkpC14pmvo=
=Klg3
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.18, round 3:
- Restrict GPC driver on register range that is accessible by regmap,
so that we can avoid user space from triggering imprecise external
abort exception.
* tag 'imx-fixes-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: restrict register range for regmap access
Signed-off-by: Olof Johansson <olof@lixom.net>
The A13, A23 and H3 have variations of the system controls, in part due to
the SRAM that are available (and can be mapped) in the SoC.
In order to make it future proof, let's add compatibles for these SoCs in
the driver.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add option to build AM6 SoC specific components
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is functionally identical but simpler and slightly faster.
The PU domain is turned on at boot time and never turned off. In the
current implementation the pm core will repeatedly call power_off when
the domain is unused and get -EBUSY back. If the domain is marked as
"always on" instead the pm core won't even attempt to turn it off.
In theory on 6qp it is safe to turn PU off in suspend, however that is
best accomplished with a new core flag.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
MT6351 is a new power management IC and it is used for mt6797 SoCs. To define
mt6351_regs for pmic register mapping and pmic_mt6351 for
accessing register.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
mt6797 is a highly integrated SoCs, it uses mt6351 for power management.
This patch adds pwrap driver to access mt6351. Pwrap of mt6797 support
dynamic priority meichanism, sequence monitor and starvation mechanism
to make transaction more reliable.
A big change from V4 to V5 is we remove INT1 interrupt declaration since
it is only for debug purpose. The PWRAP_RDDMY, RESET and DCM can use legacy
setting, it is backwards compatible. The new caps flag declaration is not
needed, just remove it.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
PWRAP_DEW_CIPHER_LOAD and PWRAP_DEW_CIPHER_START only exist at
PMIC_mt6397 datasheet. We fix it before merge PMIC_mt6351 driver.
Fixes: 5ae48040aa ("soc: mediatek: PMIC wrap: add mt6323 slave support")
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
These changes are mostly PM related changes for am335x and
am437x to support RTC only suspend mode. Some of the clock
and driver related chances are still pending so it's not
yet fully functional.
Also included is a change for PM debug sysfs entry to use
DEFINE_SHOW_ATTRIBUTE.
-----BEGIN PGP SIGNATURE-----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=Px9o
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.19/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC updates for omaps for v4.19 merge window
These changes are mostly PM related changes for am335x and
am437x to support RTC only suspend mode. Some of the clock
and driver related chances are still pending so it's not
yet fully functional.
Also included is a change for PM debug sysfs entry to use
DEFINE_SHOW_ATTRIBUTE.
* tag 'omap-for-v4.19/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: sleep33/43xx: Add RTC-Mode support
ARM: OMAP2+: sleep33/43xx: Make sleep actions configurable
ARM: OMAP2+: reuse DEFINE_SHOW_ATTRIBUTE() macro
ARM: hwmod: RTC: Don't assume lock/unlock will be called with irq enabled
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.19, please pull the following:
- Doug updates the low-level suspend/resume code for ARM SoCs to support
the latest rev B3.0 memory controllers found on newer chips with an
appropriate match structure to perform the correct entry sequencing
- Florian updates the Device Tree binding document for these memory
controllers to list all possible compatible strings that exist given
the supported memory controllers.
- Stefan adds the GET_THROTTLED firmware property value that is required
for the Rasperry Pi voltage monitoring driver and updates the
Raspberry Pi firmware driver accordingly to register such a device
using the HWMON subsystem. Finally he adds support for reporting under
voltage conditions using a specialized HWMON driver.
-----BEGIN PGP SIGNATURE-----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=mYCv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux into next/drivers
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.19, please pull the following:
- Doug updates the low-level suspend/resume code for ARM SoCs to support
the latest rev B3.0 memory controllers found on newer chips with an
appropriate match structure to perform the correct entry sequencing
- Florian updates the Device Tree binding document for these memory
controllers to list all possible compatible strings that exist given
the supported memory controllers.
- Stefan adds the GET_THROTTLED firmware property value that is required
for the Rasperry Pi voltage monitoring driver and updates the
Raspberry Pi firmware driver accordingly to register such a device
using the HWMON subsystem. Finally he adds support for reporting under
voltage conditions using a specialized HWMON driver.
* tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux:
firmware: raspberrypi: Remove VLA usage
firmware: raspberrypi: Register hwmon driver
hwmon: Add support for RPi voltage sensor
soc: bcm: brcmstb: Add missing DDR MEMC compatible strings
soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllers
ARM: bcm2835: Add GET_THROTTLED firmware property
Signed-off-by: Olof Johansson <olof@lixom.net>
The imx6sl chip errata document describes ERR006287 like this:
> Upon resuming from power gating, the modules in the display power domain
(eLCDIF, EPDC, PXP and SPDC) might fail to perform register reads
correctly.
> When the modules listed above are used, do not use power gating on the
display power domain.
Link: https://www.nxp.com/docs/en/errata/IMX6SLCE.pdf#page=62
Handle this in the safest possible way by keeping the DISP domain
always-on.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This introduces support for the SRAM C1 section, that is controlled by
the system controller. This SRAM area can be muxed either to the CPU
or the Video Engine, that needs this area to store various tables (e.g.
the Huffman VLD decoding tables).
This only supports devices with the same layout as the A10 (which also
includes the A13, A20, A33 and other SoCs).
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This binds the new A10 system-control compatible to the associated
driver, with the same driver data as the previous compatible.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add support for RTC mode to low level suspend code. This includes
providing the rtc base address for the assembly code to configuring the
PMIC_PWR_EN line late in suspend to enter RTC+DDR mode.
Note: This patch also fold in left out space parameter for
am33xx_emif_sram_table and am43xx_emif_sram_table
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add an argument to the sleep33xx and sleep43xx code to allow us to set
flags to determine which portions of the code get called in order to use
the same code for multiple power saving modes. This patch allows us to
decide whether or not we flush and disable caches, save EMIF context,
put the memory into self refresh and disable the EMIF, and/or invoke
the wkup_m3 when entering into WFI.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Now that we want to add another flag to autoremove the device link
on supplier unbind, it's fair to rename the existing flag from
DL_FLAG_AUTOREMOVE to DL_FLAG_AUTOREMOVE_CONSUMER so that we can
add similar flag for supplier later.
And, while we are touching device.h, fix a doc build warning.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Everyone gets these #ifdefs wrong, leading to another warning here:
drivers/soc/ti/wkup_m3_ipc.c:547:12: error: 'wkup_m3_ipc_resume' defined but not used [-Werror=unused-function]
static int wkup_m3_ipc_resume(struct device *dev)
drivers/soc/ti/wkup_m3_ipc.c:539:12: error: 'wkup_m3_ipc_suspend' defined but not used [-Werror=unused-function]
static int wkup_m3_ipc_suspend(struct device *dev)
The easiest way to get it right is to remove all the #ifdefs and
let the compiler drop the unused functions silently after we
mark them as __maybe_unused.
Fixes: 7a872b6fb7 ("soc: ti: wkup_m3_ipc: Add rtc_only with ddr in self refresh mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Add wkup_m3_request_wake_src to allow users to get the name of
the wakeup source after a DeepSleep or Standby transition.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Adds rtc_only support. This needs resume function to shutdown and
reboot the m3.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
* Convert to SPDX identifier
* Remove legacy SMP fallback code
Geert Uytterhoeven says "R-Car H2 and M2-W have been supporting SMP
enablement from DT using the "renesas,apmu" enable-method since v4.8.
A legacy fallback was left in place for backwards compatibility with old
DTBs.
This patch series removes the legacy SMP fallbacks for R-Car H2 and
M2-W, and consolidates their support in the common R-Car Gen2 machine
definition.2
* APMU cleanups after legacy SMP fallback removal
- Move cpu_leave_lowpower() from HOTPLUG_CPU || SUSPEND section to the
SUSPEND section as it is only used for suspend
- Remove shmobile_smp_apmu_prepare_cpus() as it is no longer used
- Remove platsmp-apmu.h
* Drop legacy SYSC fallbacks
Geert Uytterhoeven says "When DT SYSC support was introduced in v4.7,
legacy fallbacks were kept to keep secondary CPUs working on R-Car H1,
H2, and M2-W using old DTBs. However, the time has come to drop these
fallbacks, and clean up the resulting code"
-----BEGIN PGP SIGNATURE-----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=r3sD
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Arm SoC Updates for v4.19
* Convert to SPDX identifier
* Remove legacy SMP fallback code for R-CAR H2 and M2-W
- DT enablement has been in since 4.8, no longer needed
* APMU cleanups after legacy SMP fallback removal
* Drop legacy SYSC fallback code for R-Car H1, H2 and M2-W
- DT enablement has been in since 4.7, no longer needed.
* tag 'renesas-arm-soc-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: convert to SPDX identifier
soc: renesas: rcar-sysc: Drop legacy handling
ARM: shmobile: r8a7779: Remove explicit SYSC config and init
ARM: shmobile: r8a7779: Use rcar_sysc_power_{down,up}_cpu()
soc: renesas: rcar-sysc: Provide helpers to power up/down CPUs
ARM: shmobile: r8a7779: Stop powering down secondary CPUs during early boot
ARM: shmobile: rcar-gen2: Remove explicit SYSC config and init
ARM: shmobile: apmu: Remove platsmp-apmu.h
ARM: shmobile: apmu: Remove obsolete shmobile_smp_apmu_prepare_cpus()
ARM: shmobile: apmu: Move cpu_leave_lowpower() to SUSPEND section
ARM: shmobile: Remove unused shmobile_smp_init_fallback_ops()
ARM: shmobile: r8a7791: Use common R-Car Gen2 machine definition
ARM: shmobile: r8a7791: Remove legacy SMP fallback code
ARM: shmobile: r8a7790: Use common R-Car Gen2 machine definition
ARM: shmobile: r8a7790: Remove legacy SMP fallback code
Signed-off-by: Olof Johansson <olof@lixom.net>
We would not be matching the following chip/compatible strings
combinations, which would lead to not setting the warm boot flag
correctly, fix that:
7260A0/B0: brcm,brcmstb-memc-ddr-rev-b.2.1
7255A0: brcm,brcmstb-memc-ddr-rev-b.2.3
7278Bx: brcm,brcmstb-memc-ddr-rev-b.3.1
The B2.1 core (which is in 7260 A0 and B0) doesn't have the
SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL setup in the memsys init code, nor
does it have the warm boot flag re-definition on entry. Those changes
were for B2.2 and later MEMSYS cores. Fall back to the previous S2/S3
entry method for these specific chips.
Fixes: 0b741b8234 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Device Tree binding document and add a matching entry for the
MEMC DDR controller revision B3.0 which is found on chips like 7278A0
and newer.
Signed-off-by: Doug Berger <opendmb@gmail.com>
[florian: tweak commit message, make it apply to upstream kernel]
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header
variable is never initialized, and through code optimization concludes
that a lot of other code cannot possibly work after that:
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr':
drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret < 0 ? 0 : le32_to_cpu(ent.addr);
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data':
drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
ent_len = le16_to_cpu(ent.len);
drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
u16 offset = le16_to_cpu(hdr->data_offset);
^~~~~~
drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
u16 loffset = le16_to_cpu(ent->offset);
^~~~~~~
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len':
drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret < 0 ? 0 : le16_to_cpu(ent.len);
^
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id':
drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning,
and we can remove the CONFIG_OF dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- Fix i.MX6SX PCIe MSI interrupt number, so that MSI IRQs can be
properly propagated to the upstream interrupt controller.
- Fix GPCv2 MIPI/PCIe/USB_HSIC's PGC offset. The values in Reference
Manual are incorrect.
- Correct SDMA setting for i.MX6Q SPI5 device to fix the issue, that
the SPI controller RX FIFO was not empty after a DMA transfer, and
the driver gets stuck in the next PIO transfer when reading one word
more than expected.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbKLcnAAoJEFBXWFqHsHzO8dMH/ijDSZf172X9jls8iQgcFQ8h
ZAnIj+T23j9L8CTHBx5OLgUxaHYgX410HYvqWuubCNDKv+DMCP+7QNE6v+iSehhT
8sA4dX5296orNb9d5dXyf0XIZ4dA1ljhoZUY6r9DHGFfkIriHwX6HB0zl9EmroAK
mVMGeltfGqPCZ6bH1O6L4oCZNfaOmqBz1f767Es4uxD0IzPg/9BlarqLgASu+op1
1KVFGKY/o4S6QrMxrLxlsrqFUx1DmRQyWxtKYyPlkY6LIHeiJNMCLh9NzW+/qGHf
keycpIjVdlVdZMILDeTju3gszoOmXjq0L1XP9Ityf9OLq53c1Ypsn9npK2ccZNU=
=lalT
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.18:
- Fix i.MX6SX PCIe MSI interrupt number, so that MSI IRQs can be
properly propagated to the upstream interrupt controller.
- Fix GPCv2 MIPI/PCIe/USB_HSIC's PGC offset. The values in Reference
Manual are incorrect.
- Correct SDMA setting for i.MX6Q SPI5 device to fix the issue, that
the SPI controller RX FIFO was not empty after a DMA transfer, and
the driver gets stuck in the next PIO transfer when reading one word
more than expected.
* tag 'imx-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx: fix irq for pcie bridge
soc: imx: gpcv2: correct PGC offset
ARM: dts: imx6q: Use correct SDMA script for SPI5 core
Signed-off-by: Olof Johansson <olof@lixom.net>
Make PM domain initialization more robust in Renesas R-Car SYSC driver.
This resolves a regression due to re-parenting of PM domains by
086b399965 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}").
-----BEGIN PGP SIGNATURE-----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=ujRB
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v4.18
Make PM domain initialization more robust in Renesas R-Car SYSC driver.
This resolves a regression due to re-parenting of PM domains by
086b399965 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}").
* tag 'renesas-fixes-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Make PM domain initialization more robust
Signed-off-by: Olof Johansson <olof@lixom.net>
The SRAM mapping controls on Allwinner SoCs is located in a block called
"System Controls". This block also has registers for identifying the SoC,
reading the state of an external boot-related pin, and on some newer SoCs,
glue layer controls for the EMAC Ethernet controller.
The A64 variant compatible is renamed to "allwinner,a64-system-control"
to reflect this. The old A64 compatible is deprecated. So far we haven't
seen any actual use of it.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A64 SRAM controller memory zone has a EMAC clock register, which is
needed by the Ethernet MAC driver (dwmac-sun8i).
Export a regmap for this register on A64.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[wens@csie.org: export whole address range with only EMAC register
accessible and drop regmap name]
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
qcom_mdt_load function loads the mdt type firmware and
initialises the secure memory as well. Make the initialisation only
when requested by the caller, so that the function can be used
by self-authenticating remoteproc as well.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Now the R-Car platform code no longer supports DTBs lacking a SYSC
device node in DT, all legacy handling can be dropped from the R-Car
SYSC driver:
- Make rcar_sysc_ch private to the driver,
- Make rcar_sysc_power_{down,up}() static (they have been replaced by
rcar_sysc_power_{down,up}_cpu()),
- Remove the legacy wrapper rcar_sysc_init(), and the check for double
initialization (only the early_initcall is left).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Provide helpers to control CPU power areas from platform code, taking
just a CPU index. This will avoid having to pass full CPU power area
parameter blocks, and thus duplicating information already provided by
SoC-specific SYSC drivers.
This will be used on R-Car H1 only.
Later R-Car generations rely on APMU/RST for CPU power area control.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Correct MIPI/PCIe/USB_HSIC's PGC offset based on
design RTL, the values in the Reference Manual
(Rev. 1, 01/2018 and the older ones) are incorrect.
The correct offset values should be as below:
0x800 ~ 0x83F: PGC for core0 of A7 platform;
0x840 ~ 0x87F: PGC for core1 of A7 platform;
0x880 ~ 0x8BF: PGC for SCU of A7 platform;
0xA00 ~ 0xA3F: PGC for fastmix/megamix;
0xC00 ~ 0xC3F: PGC for MIPI PHY;
0xC40 ~ 0xC7F: PGC for PCIe_PHY;
0xC80 ~ 0xCBF: PGC for USB OTG1 PHY;
0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY;
0xD00 ~ 0xD3F: PGC for USB HSIC PHY;
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fixes: 03aa12629f ("soc: imx: Add GPCv2 power gating driver")
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With PHYS_ADDR_MAX there is now a type safe variant for all bits set.
Make use of it.
Patch created using a semantic patch as follows:
// <smpl>
@@
typedef phys_addr_t;
@@
-(phys_addr_t)ULLONG_MAX
+PHYS_ADDR_MAX
// </smpl>
Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
This is a branch with a few merge requests that either came in late, or
took a while longer for us to review and merge than usual and thus cut
it a bit close to the merge window. We stage them in a separate branch
and if things look good, we still send them up -- and that's the case
here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface.
-----BEGIN PGP SIGNATURE-----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=RUL0
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...
This branch contains platform-related driver updates for ARM and ARM64.
Highlights:
- ARM SCMI (System Control & Management Interface) driver cleanups
- Hisilicon support for LPC bus w/ ACPI
- Reset driver updates for several platforms: Uniphier,
- Rockchip power domain bindings and hardware descriptions for several SoCs.
- Tegra memory controller reset improvements
-----BEGIN PGP SIGNATURE-----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=xs+f
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"This contains platform-related driver updates for ARM and ARM64.
Highlights:
- ARM SCMI (System Control & Management Interface) driver cleanups
- Hisilicon support for LPC bus w/ ACPI
- Reset driver updates for several platforms: Uniphier,
- Rockchip power domain bindings and hardware descriptions for
several SoCs.
- Tegra memory controller reset improvements"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits)
ARM: tegra: fix compile-testing PCI host driver
soc: rockchip: power-domain: add power domain support for px30
dt-bindings: power: add binding for px30 power domains
dt-bindings: power: add PX30 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3228
dt-bindings: power: add binding for rk3228 power domains
dt-bindings: power: add RK3228 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3128
dt-bindings: power: add binding for rk3128 power domains
dt-bindings: power: add RK3128 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3036
dt-bindings: power: add binding for rk3036 power domains
dt-bindings: power: add RK3036 SoCs header for power-domain
dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Register SMMU after MC driver became ready
soc: mediatek: remove unneeded semicolon
soc: mediatek: add a fixed wait for SRAM stable
soc: mediatek: introduce a CAPS flag for scp_domain_data
soc: mediatek: reuse regmap_read_poll_timeout helpers
...
Here are the main updates for SoC support (besides DT additions) for ARM
32- and 64-bit platforms. The branch also contains defconfig updates to
turn on drivers and options as needed on the various platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products.
-----BEGIN PGP SIGNATURE-----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=S5wc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Here are the main updates for SoC support (besides DT additions) for
ARM 32- and 64-bit platforms. The branch also contains defconfig
updates to turn on drivers and options as needed on the various
platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
MAINTAINERS: add NXP linux team maillist as i.MX reviewer
ARM: stm32: Don't select DMA unconditionally on STM32MP157C
arm64: defconfig: Enable PCIe on msm8996 and db820c
ARM: pxa3xx: enable external wakeup pins
ARM: pxa: stargate2: use device properties for at24 eeprom
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
arm64: defconfig: Enable UFS on msm8996
ARM: berlin: switch to SPDX license identifier
arm: berlin: remove non-necessary flush_cache_all()
ARM: berlin: extend BG2CD Kconfig entry
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
bus: ti-sysc: Fix optional clocks array access
ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
...
general cleanups, but nothing too major. The majority of the diff goes to
two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for
Actions Semi so it takes up some lines to add all the different types, and
the Qualcomm diff is there because we add support for two SoCs and it's quite
a bit of data.
Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And
then the long tail of driver updates for various fixes and stuff follows
after that.
Core:
- debugfs cleanups removing error checking and an unused provider API
- Removal of a clk init typedef that isn't used
- Usage of match_string() to simplify parent string name matching
- OF clk helpers moved to their own file (linux/of_clk.h)
- Make clk warnings more readable across kernel versions
New Drivers:
- Qualcomm SDM845 GCC and Video clk controllers
- Qualcomm MSM8998 GCC
- Actions Semi S900 SoC support
- Nuvoton npcm750 microcontroller clks
- Amlogic axg AO clock controller
Removed Drivers:
- Deprecated Rockchip clk-gate driver
Updates:
- debugfs functions stopped checking return values
- Support for the MSIOF module clocks on Rensas R-Car M3-N
- Support for the new Rensas RZ/G1C and R-Car E3 SoCs
- Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
- Berlin and Amlogic SPDX tagging
- Usage of of_clk_get_parent_count() in more places
- Proper implementation of the CDEV1/2 clocks on Tegra20
- Allwinner H6 PRCM clock support and R40 EMAC support
- Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
- Round closest support for meson's mpll driver
- Support for meson8b nand clocks and gxbb video decoder clocks
- Mediatek mali clks
- STM32MP1 fixes
- Uniphier LD11/LD20 stream demux system clock
-----BEGIN PGP SIGNATURE-----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=KK/v
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time we have a good set of changes to the core framework that do
some general cleanups, but nothing too major. The majority of the diff
goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
introduced for Actions Semi so it takes up some lines to add all the
different types, and the Qualcomm diff is there because we add support
for two SoCs and it's quite a bit of data.
Otherwise the big driver updates are on TI Davinci and Amlogic
platforms. And then the long tail of driver updates for various fixes
and stuff follows after that.
Core:
- debugfs cleanups removing error checking and an unused provider API
- Removal of a clk init typedef that isn't used
- Usage of match_string() to simplify parent string name matching
- OF clk helpers moved to their own file (linux/of_clk.h)
- Make clk warnings more readable across kernel versions
New Drivers:
- Qualcomm SDM845 GCC and Video clk controllers
- Qualcomm MSM8998 GCC
- Actions Semi S900 SoC support
- Nuvoton npcm750 microcontroller clks
- Amlogic axg AO clock controller
Removed Drivers:
- Deprecated Rockchip clk-gate driver
Updates:
- debugfs functions stopped checking return values
- Support for the MSIOF module clocks on Rensas R-Car M3-N
- Support for the new Rensas RZ/G1C and R-Car E3 SoCs
- Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
- Berlin and Amlogic SPDX tagging
- Usage of of_clk_get_parent_count() in more places
- Proper implementation of the CDEV1/2 clocks on Tegra20
- Allwinner H6 PRCM clock support and R40 EMAC support
- Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
- Round closest support for meson's mpll driver
- Support for meson8b nand clocks and gxbb video decoder clocks
- Mediatek mali clks
- STM32MP1 fixes
- Uniphier LD11/LD20 stream demux system clock"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
clk: qcom: Export clk_fabia_pll_configure()
clk: bcm: Update and add Stingray clock entries
dt-bindings: clk: Update Stingray binding doc
clk-si544: Properly round requested frequency to nearest match
clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
clk: ingenic: jz4770: Change OTG from custom to standard gated clock
clk: ingenic: Support specifying "wait for clock stable" delay
clk: ingenic: Add support for clocks whose gate bit is inverted
clk: use match_string() helper
clk: bcm2835: use match_string() helper
clk: Return void from debug_init op
clk: remove clk_debugfs_add_file()
clk: tegra: no need to check return value of debugfs_create functions
clk: davinci: no need to check return value of debugfs_create functions
clk: bcm2835: no need to check return value of debugfs_create functions
clk: no need to check return value of debugfs_create functions
clk: imx6: add EPIT clock support
clk: mvebu: use correct bit for 98DX3236 NAND
...
The quirk for R-Car E3 ES1.0 added in commit 086b399965 ("soc:
renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") makes the 3DG-A
PM domain a subdomain of the 3DG-B PM domain. However, registering
3DG-A with its parent fails silently, as the 3DG-B PM domain hasn't been
registered yet, and such failures are never reported.
Fix this by:
1. Splitting PM Domain initialization in two steps, so all PM domains
are registered before any child-parent links are established,
2. Reporting any failures in establishing child-parent relations.
Check for and report pm_genpd_init() failures, too, as that function
gained a return value in commit 7eb231c337 ("PM / Domains: Convert
pm_genpd_init() to return an error code").
Fixes: 086b399965 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsYJ1gWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlCTEACwdEeriAd2VwxknnsstojGD/3g
8TTFA19vSu4Gxa6WiDkjGoSmIlfhXTlZo1Nlmencv16ytSvIVDNLUIB3uDxUIv1J
2+dyHML9JpXYHHR7zLXXnGFJL0wazqjbsD3NYQgXqmun7EVVYnOsAlBZ7h/Lwiej
jzEJd8DaHT3TA586uD3uggiFvQU0yVyvkDCDONIytmQx+BdtGdg9TYCzkBJaXuDZ
YIthyKDvxIw5nh/UaG3L+SKo73tUr371uAWgAfqoaGQQCWe+mxnWL4HkCKsjFzZL
u9ouxxF/n6pij3E8n6rb0i2fCzlsTDdDF+aqV1rQ4I4hVXCFPpHUZgjDPvBWbj7A
m6AfRHVNnOgI8HGKqBGOfViV+2kCHlYeQh3pPW33dWzy/4d/uq9NIHKxE63LH+S4
bY3oO2ela8oxRyvEgXLjqmRYGW1LB/ZU7FS6Rkx2gRzo4k8Rv+8K/KzUHfFVRX61
jEbiPLzko0xL9D53kcEn0c+BhofK5jgeSWxItdmfuKjLTW4jWhLRlU+bcUXb6kSS
S3G6aF+L+foSUwoq63AS8QxCuabuhreJSB+BmcGUyjthCbK/0WjXYC6W/IJiRfBa
3ZTxBC/2vP3uq/AGRNh5YZoxHL8mSxDfn62F+2cqlJTTKR/O+KyDb1cusyvk3H04
KCDVLYPxwQQqK1Mqig==
=/3L8
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"This adds the new overflow checking helpers and adds them to the
2-factor argument allocators. And this adds the saturating size
helpers and does a treewide replacement for the struct_size() usage.
Additionally this adds the overflow testing modules to make sure
everything works.
I'm still working on the treewide replacements for allocators with
"simple" multiplied arguments:
*alloc(a * b, ...) -> *alloc_array(a, b, ...)
and
*zalloc(a * b, ...) -> *calloc(a, b, ...)
as well as the more complex cases, but that's separable from this
portion of the series. I expect to have the rest sent before -rc1
closes; there are a lot of messy cases to clean up.
Summary:
- Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)"
* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use struct_size() for devm_kmalloc() and friends
treewide: Use struct_size() for vmalloc()-family
treewide: Use struct_size() for kmalloc()-family
device: Use overflow helpers for devm_kmalloc()
mm: Use overflow helpers in kvmalloc()
mm: Use overflow helpers in kmalloc_array*()
test_overflow: Add memory allocation overflow tests
overflow.h: Add allocation size calculation helpers
test_overflow: Report test failures
test_overflow: macrofy some more, do more tests for free
lib: add runtime test of check_*_overflow functions
compiler.h: enable builtin overflow checkers and add fallback code
We've got many code additions at this cycle as a result of quite a few
new drivers. Below are highlights:
Core stuff:
- Fix the long-standing issue with the device registration order;
the control device is now registered at last
- PCM locking code cleanups for RT kernels
- Fixes for possible races in ALSA timer resolution accesses
- TLV offset definitions in uapi
ASoC:
- Many fixes for the topology stuff, including fixes for v4 ABI
compatibility
- Lots of cleanups / quirks for Intel platforms based on Realtek
CODECs
- Continued componentization works, removing legacy CODEC stuff
- Conversion of OMAP DMA to the new, more standard SDMA-PCM driver
- Fixes and updates to Cirrus Logic SoC drivers
- New Qualcomm DSP support
- New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and
RT5668 and TI TSCS454
HD-audio:
- Finally better support for some CA0132 boards, allowing Windows
firmware
- HP Spectre x360 support along with a bulk of COEF stuff
- Blacklisting power save default some known boards reported on Fedora
USB-audio:
- Continued improvements on UAC3 support; now BADD is supported
- Fixes / improvements for Dell WD15 dock
- Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co
Others:
- New Xen sound frontend driver support
- Cache implementation and other improvements for FireWire DICE
- Conversions to octal permissions in allover places
-----BEGIN PGP SIGNATURE-----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=37hC
-----END PGP SIGNATURE-----
Merge tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've got many code additions at this cycle as a result of quite a few
new drivers. Below are highlights:
Core stuff:
- Fix the long-standing issue with the device registration order; the
control device is now registered at last
- PCM locking code cleanups for RT kernels
- Fixes for possible races in ALSA timer resolution accesses
- TLV offset definitions in uapi
ASoC:
- Many fixes for the topology stuff, including fixes for v4 ABI
compatibility
- Lots of cleanups / quirks for Intel platforms based on Realtek
CODECs
- Continued componentization works, removing legacy CODEC stuff
- Conversion of OMAP DMA to the new, more standard SDMA-PCM driver
- Fixes and updates to Cirrus Logic SoC drivers
- New Qualcomm DSP support
- New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306
and RT5668 and TI TSCS454
HD-audio:
- Finally better support for some CA0132 boards, allowing Windows
firmware
- HP Spectre x360 support along with a bulk of COEF stuff
- Blacklisting power save default some known boards reported on
Fedora
USB-audio:
- Continued improvements on UAC3 support; now BADD is supported
- Fixes / improvements for Dell WD15 dock
- Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co
Others:
- New Xen sound frontend driver support
- Cache implementation and other improvements for FireWire DICE
- Conversions to octal permissions in allover places"
* tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (386 commits)
ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it
ALSA: usb-audio: remove redundant check on err
ASoC: topology: Move skl-tplg-interface.h to uapi
ASoC: topology: Move v4 manifest header data structures to uapi
ASoC: topology: Improve backwards compatibility with v4 topology files
ALSA: pci/hda: Remove unused, broken, header file
ASoC: TSCS454: Add Support
ASoC: Intel: kbl: Move codec sysclk config to codec_init function
ASoC: simple-card: set cpu dai clk in hw_params
ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream()
ALSA: oxygen: use match_string() helper
ASoC: dapm: use match_string() helper
ASoC: max98095: use match_string() helper
ASoC: max98088: use match_string() helper
ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks
ASoC: mt6797-mt6351: add hostless phone call path
ASoC: mt6797: add Hostless DAI
ASoC: mt6797: add PCM interface
ASoC: mediatek: export mtk-afe symbols as needed
ASoC: codecs: PCM1789: include gpio/consumer.h
...
These include a significant update of the generic power domains (genpd)
and Operating Performance Points (OPP) frameworks, mostly related to
the introduction of power domain performance levels, cpufreq updates
(new driver for Qualcomm Kryo processors, updates of the existing
drivers, some core fixes, schedutil governor improvements), PCI power
management fixes, ACPI workaround for EC-based wakeup events handling
on resume from suspend-to-idle, and major updates of the turbostat
and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks
in the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the
schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann,
Rafael Wysocki, Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman,
Viresh Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag
set and update stale comments in the PCI core PM code (Rafael
Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver
(David Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wqBV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a significant update of the generic power domains
(genpd) and Operating Performance Points (OPP) frameworks, mostly
related to the introduction of power domain performance levels,
cpufreq updates (new driver for Qualcomm Kryo processors, updates of
the existing drivers, some core fixes, schedutil governor
improvements), PCI power management fixes, ACPI workaround for
EC-based wakeup events handling on resume from suspend-to-idle, and
major updates of the turbostat and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks in
the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the schedutil
cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
and update stale comments in the PCI core PM code (Rafael Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies)"
* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
tools/power turbostat: update version number
tools/power turbostat: Add Node in output
tools/power turbostat: add node information into turbostat calculations
tools/power turbostat: remove num_ from cpu_topology struct
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
tools/power turbostat: track thread ID in cpu_topology
tools/power turbostat: Calculate additional node information for a package
tools/power turbostat: Fix node and siblings lookup data
tools/power turbostat: set max_num_cpus equal to the cpumask length
tools/power turbostat: if --num_iterations, print for specific number of iterations
tools/power turbostat: Add Cannon Lake support
tools/power turbostat: delete duplicate #defines
x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: add POLL and POLL% column
tools/power turbostat: Fix --hide Pk%pc10
tools/power turbostat: Build-in "Low Power Idle" counters support
tools/power turbostat: Don't make man pages executable
tools/power turbostat: remove blank lines
tools/power turbostat: a small C-states dump readability immprovement
...
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
A final few MIPS fixes for 4.17:
- Drop Lantiq gphy reboot/remove reset (4.14)
- prctl(PR_SET_FP_MODE): Disallow PRE without FR (4.0)
- ptrace(PTRACE_PEEKUSR): Fix 64-bit FGRs (3.15)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS7lRNBWUYtqfDOVL41zuSGKxAj8gUCWxHFOwAKCRA1zuSGKxAj
8i39AQCX9phkffpRDnA1e/MiGGeRZ5+f9FBOzuS1x2nzdUagoQD9FzWxdcx57Syj
ye0kUtmc/wm8U6kz3qC3OInSeVuIEQg=
=3NGM
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from James Hogan:
"A final few MIPS fixes for 4.17:
- drop Lantiq gphy reboot/remove reset (4.14)
- prctl(PR_SET_FP_MODE): Disallow PRE without FR (4.0)
- ptrace(PTRACE_PEEKUSR): Fix 64-bit FGRs (3.15)"
* tag 'mips_fixes_4.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs
MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
MIPS: lantiq: gphy: Drop reboot/remove reset asserts
* SoC
- Change platform dependency to ARCH_RENESAS
Geert Uytterhoeven says "The Renesas Fine Display Processor driver is
used on Renesas R-Car SoCs only. Since commit 9b5ba0df4e ("ARM:
shmobile: Introduce ARCH_RENESAS") is ARCH_RENESAS a more appropriate
platform dependency than the legacy ARCH_SHMOBILE, hence use the
former.
This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near
future."
- Add the to Kconfig RZ/N1D (r9a06g032) SoC
In preparation for upstream support of this SoC
- Identify R-Car E3 (r8a77990) SoC
- Identify and add minimal support for RZ/G1C (r8a77470) SoC
* R-Car SYSC
- Add support for R-Car E3 (r8a77990) SoC
Shimoda-san says this adds:
+ "Cortex-A53 CPU{0,1}, Cortex-A53 SCU, Cortex-R7, A3VC,
A2VC1 and 3DG-{A,B} power domain areas..."
+ "workaround for 3DG-{A,B} of R-Car E3 ES1.0 because
the SoC has a restriction about the order."
- Remove unused inclusion of <linux/sys_soc.h>,
- Make r8a77995_areas[] const.
* R-Car Reset
- Add support for R-Car E3 (r8a77990) SoC
This driver is needed for the clock driver to work
* Debug-LL
- Add support for RZ/G1C (r8a77470) SoC
RZ/G1C uses SCIF1 for the debug console
-----BEGIN PGP SIGNATURE-----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=xLPA
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Updates for v4.18
* SoC
- Change platform dependency to ARCH_RENESAS
This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near
future.
- Add the to Kconfig RZ/N1D (r9a06g032) SoC
- Identify R-Car E3 (r8a77990) SoC
- Identify and add minimal support for RZ/G1C (r8a77470) SoC
* R-Car SYSC
- Add support for R-Car E3 (r8a77990) SoC
- Remove unused inclusion of <linux/sys_soc.h>,
- Make r8a77995_areas[] const.
* R-Car Reset
- Add support for R-Car E3 (r8a77990) SoC
* Debug-LL
- Add support for RZ/G1C (r8a77470) SoC
* tag 'renesas-soc-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}
soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig
arm: shmobile: Change platform dependency to ARCH_RENESAS
soc: renesas: r8a77995-sysc: Cleanups
soc: renesas: rcar-rst: Add support for R-Car E3
soc: renesas: Add r8a77990 SYSC PM Domain Binding Definitions
soc: renesas: identify R-Car E3
ARM: debug-ll: Add support for r8a77470
ARM: shmobile: Add the RZ/N1 arch to the shmobile Kconfig
ARM: shmobile: r8a77470: basic SoC support
soc: renesas: rcar-sysc: Add r8a77470 support
soc: renesas: rcar-rst: Add support for RZ/G1C
soc: renesas: Identify RZ/G1C
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlsGtd0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZNOCACgExx606ykKSFj9SZEUdXyR/iLCxfrPyoW
28r5IZ6lcp+k5lkJXbsISiyO1pkj7Stz++Uur/blecdwdeLz7nRUNcuDYhXf+2Vp
m4fGvY0Gsz0dFrWO0GoVbVNh5IqjS0zNJRoJQckA+gPUmsXhisf+/ZwWxZj8gl1M
r44+9zDGAYuvacnu2UwYMoOQWywu4gdU/W3cH/bY0CCr6D3RoV9f7NxOYUxGGCeT
DAp9b4pmrIvNZrhOeXSDT3+xO2mMC9wOoDMudeVPlvn6JhfD3dhrgrg7/XKF6X8J
xAjVEBVA0jPzNPWXCMPl3Mne13mbK5DTGwSQVuDGuq3N66T/B5D0
=x85Q
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Power-domain support for Rockchip socs px30, rk3128, rk3228 and rk3036.
* tag 'v4.18-rockchip-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: add power domain support for px30
dt-bindings: power: add binding for px30 power domains
dt-bindings: power: add PX30 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3228
dt-bindings: power: add binding for rk3228 power domains
dt-bindings: power: add RK3228 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3128
dt-bindings: power: add binding for rk3128 power domains
dt-bindings: power: add RK3128 SoCs header for power-domain
soc: rockchip: power-domain: add power domain support for rk3036
dt-bindings: power: add binding for rk3036 power domains
dt-bindings: power: add RK3036 SoCs header for power-domain
Signed-off-by: Olof Johansson <olof@lixom.net>
Create function qcom_smem_virt_to_phys(), which returns the physical
address corresponding to a given SMEM item's virtual address. This
feature is required for a driver that will soon be out for review.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In qmi_handle_init(), a buffer is allocated for to hold messages
received through the handle's socket. Any "normal" messages
(expected by the caller) will have a header prepended, so the
buffer size is adjusted to accomodate that.
The buffer must also be of sufficient size to receive control
messages, so the size is increased if necessary to ensure these
will fit.
Unfortunately the calculation is done wrong, making it possible
for the calculated buffer size to be too small to hold a "normal"
message. Specifically, if:
recv_buf_size > sizeof(struct qrtr_ctrl_pkt) - sizeof(struct qmi_header)
AND
recv_buf_size < sizeof(struct qrtr_ctrl_pkt)
the current logic will use sizeof(struct qrtr_ctrl_pkt) as the
receive buffer size, which is not enough to hold the maximum
"normal" message plus its header. Currently this problem occurs
for (13 < recv_buf_size < 20).
This patch corrects this.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Incoming Qualcomm changes for GENI, i2c [1], and cmd-db [2] are enabled
with COMPILE_TEST in drivers/soc/qcom. For this to work, the Makefile
in that directory has to be included unconditionally, rather than only
if ARCH_QCOM is enabled.
Example of the errors seen on allmodconfig with the GENI, i2c, and
cmd-db patches applied:
Kernel: arch/x86/boot/bzImage is ready (#1)
ERROR: "geni_se_select_mode" [drivers/tty/serial/qcom_geni_serial.ko] undefined!
ERROR: "geni_se_init" [drivers/tty/serial/qcom_geni_serial.ko] undefined!
ERROR: "geni_se_config_packing" [drivers/tty/serial/qcom_geni_serial.ko] undefined!
ERROR: "geni_se_resources_on" [drivers/tty/serial/qcom_geni_serial.ko] undefined!
ERROR: "geni_se_resources_off" [drivers/tty/serial/qcom_geni_serial.ko] undefined!
ERROR: "geni_se_tx_dma_unprep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_tx_dma_prep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_rx_dma_unprep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_rx_dma_prep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_select_mode" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_config_packing" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_init" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_resources_off" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
ERROR: "geni_se_resources_on" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make: *** [Makefile:1237: modules] Error 2
[1] https://patchwork.ozlabs.org/cover/893437/
[2] https://lkml.org/lkml/2018/4/10/714
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
There's no sense in scanning the partition table again if we know
the global partition has already been discovered. Check for a
non-null global_partition pointer in qcom_smem_set_global_partition()
immediately.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If there is at least one entry in the partition table, but no global
entry, the qcom_smem_set_global_partition() should return an error
just like it does if there are no partition table entries.
It turns out the function still returns an error in this case, but
it waits to do so until it has mistakenly treated the last entry in
the table as if it were the global entry found.
Fix the function to return immediately if no global entry is found
in the table.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
It's OK if the space for a newly-allocated uncached entry actually
touches the free cached space boundary. It's only a problem if it
would cross it.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Two places report an error when a partition header is found to
not contain the right canary value. The error messages do not
properly byte swap the host ids. Fix this, and adjust the format
specificier to match the 16-bit unsigned data type.
Move the error handling for a bad canary value to the end of
qcom_smem_alloc_private(). This avoids some long lines, and
reduces the distraction of handling this unexpected problem.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
What phdr_to_last_uncached_entry() returns is the address of the
start of the free space following all allocated uncached entries.
It really doesn't refer to an actual (initialized) private entry
structure. Similarly phdr_to_last_cached_entry() returns the
address of the end of free space, preceding the last allocated cache
entry. Change both functions' return type to be pointer to void
to reflect this.
Meanwhile, phdr_to_first_cached_entry() really *does* point to a
private entry structure, so change its return type to reflect
this fact.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cached items are found at the high end of an smem partition. A
cached item's shared memory precedes the private entry structure
that describes it.
The address of the structure describing the first cached item should
be returned by phdr_to_first_cached_entry(). However the function
calculates the start address using the wrong structure size.
Fix this by computing the first item's entry structure address by
subtracting the size of a private entry structure rather than a
partition header structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This driver deals with memory that is stored in little-endian format.
Update the structures with the proper little-endian types and then
do the proper conversions when reading the fields. Note that we compare
the ids with a memcmp() because we already pad out the string 'id' field
to exactly 8 bytes with the strncpy() onto the stack.
Cc: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Command DB is a simple database in the shared memory of QCOM SoCs, that
provides information regarding shared resources. Some shared resources
in the SoC have properties that are probed dynamically at boot by the
remote processor. The information pertaining to the SoC and the platform
are made available in the shared memory. Drivers can query this
information using predefined strings.
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- Use platform_device_add_data() instead of a pointer to a static
memory in gpc/gpcv2 driver for platform data passing, so that we
can avoid a BUG() when calling platform_device_put().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbAX1lAAoJEFBXWFqHsHzO7O4IAIvjX0/WfE2Ff3On313fTiQk
7JSS5CLnWfnjNKVUIUwEJcV+Oq0KLD0ljPL701ajP9ejzxQPvkb5TIutYrgbVS4b
lMdW8uHYyqmYrjh+Wz4s0+ub3N3DIgLXTQtQHecNKuzjS6CqXHnIliZ0WZQxBTID
tzBlYjwvD2Hf4lFMxLsSiRmWKaOtE1u0wzhskRvQ4sD/XJqxyWYUSV0WxfXtCx+m
4noWAc33AfZ8j8Y3eJSOGzf+GwO0bCIKDkya1c9hvMQBHQqCpTBZv5SAvaQ5fOU4
c4ZQLaKqocGqDB+GS0qcVd/Exlytx1yJqfApVYcyW77dEt7XtzuGG5KLfu8hG1s=
=DBJS
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers update for 4.18:
- Use platform_device_add_data() instead of a pointer to a static
memory in gpc/gpcv2 driver for platform data passing, so that we
can avoid a BUG() when calling platform_device_put().
* tag 'imx-drivers-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: Do not pass static memory as platform data
soc: imx: gpcv2: Do not pass static memory as platform data
Signed-off-by: Olof Johansson <olof@lixom.net>
While doing a global software reset, these bits are not cleared and let
some bootloader fail to initialise the GPHYs. The bootloader don't
expect the GPHYs in reset, as they aren't during power on.
The asserts were a workaround for a wrong syscon-reboot mask. With a
mask set which includes the GPHY resets, these resets aren't required
any more.
Fixes: 126534141b ("MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/19003/
[jhogan@kernel.org: Fix build warnings]
Signed-off-by: James Hogan <jhogan@kernel.org>
Linus Torvalds