Migrate vram to ram may fail to find the vma if process is exiting
and vma is removed, evict svm bo worker sets prange->svm_bo to NULL
and warn svm_bo ref count != 1 only if migrating vram to ram
successfully.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3abfe30d80.
To fix deadlock in kFDSVMEvictTest when xnack off.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix checkpatch reported warning for a quoted line and block line
comments.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If copy_to_user() fails, it returns the number of bytes remaining to
be copied but we want to return a negative error code (-EFAULT) to the
user.
Fixes: 9d5dabfeff ("drm/amdkfd: CRIU Save Shared Virtual Memory ranges")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With no HWS, TLB flushing will not work in SVM code.
Fix this by calling kfd_flush_tlb() which works for both
HWS and no HWS case.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In CRIU resume stage, resume all the shared virtual memory ranges from
the data stored inside the resuming kfd process during CRIU restore
phase. Also setup xnack mode and free up the resources.
KFD_IOCTL_SVM_ATTR_CLR_FLAGS is not available for querying via get_attr
interface but we must clear the flags during restore as there might be
some default flags set when the prange is created. Also handle the
invalid PREFETCH atribute values saved during checkpoint by replacing
them with another dummy KFD_IOCTL_SVM_ATTR_SET_FLAGS attribute.
(rajneesh: Fixed the checkpatch reported problems)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During CRIU restore phase, the VMAs for the virtual address ranges are
not at their final location yet so in this stage, only cache the data
required to successfully resume the svm ranges during an imminent CRIU
resume phase.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During checkpoint stage, save the shared virtual memory ranges and
attributes for the target process. A process may contain a number of svm
ranges and each range might contain a number of attributes. While not
all attributes may be applicable for a given prange but during
checkpoint we store all possible values for the max possible attribute
types.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A KFD process may contain a number of virtual address ranges for shared
virtual memory management and each such range can have many SVM
attributes spanning across various nodes within the process boundary.
This change reports the total number of such SVM ranges and
their total private data size by extending the PROCESS_INFO op of the the
CRIU IOCTL to discover the svm ranges in the target process and a future
patches brings in the required support for checkpoint and restore for
SVM ranges.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both svm_range_get_attr and svm_range_set_attr helpers use mm struct
from current but for a Checkpoint or Restore operation, the current->mm
will fetch the mm for the CRIU master process. So modify these helpers to
accept the task mm for a target kfd process to support Checkpoint
Restore.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All warnings (new ones prefixed by >>):
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c: In function
'svm_range_deferred_list_work':
>> drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2067:22: warning:
variable 'p' set but not used [-Wunused-but-set-variable]
2067 | struct kfd_process *p;
|
Fixes: 367c9b0f1b ("drm/amdkfd: Ensure mm remain valid in svm deferred_list work")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-By: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_process_notifier_release flush svm_range_restore_work
which calls svm_range_list_lock_and_flush_work to flush deferred_list
work, but if deferred_list work mmput release the last user, it will
call exit_mmap -> notifier_release, it is deadlock with below backtrace.
Move flush svm_range_restore_work to kfd_process_wq_release to avoid
deadlock. Then svm_range_restore_work take task->mm ref to avoid mm is
gone while validating and mapping ranges to GPU.
Workqueue: events svm_range_deferred_list_work [amdgpu]
Call Trace:
wait_for_completion+0x94/0x100
__flush_work+0x12a/0x1e0
__cancel_work_timer+0x10e/0x190
cancel_delayed_work_sync+0x13/0x20
kfd_process_notifier_release+0x98/0x2a0 [amdgpu]
__mmu_notifier_release+0x74/0x1f0
exit_mmap+0x170/0x200
mmput+0x5d/0x130
svm_range_deferred_list_work+0x104/0x230 [amdgpu]
process_one_work+0x220/0x3c0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reported-by: Ruili Ji <ruili.ji@amd.com>
Tested-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_deferred_list work should continue to handle deferred_range_list
which maybe split to child range to avoid child range leak, and remove
ranges mmu interval notifier to avoid mm mm_count leak. So taking mm
reference when adding range to deferred list, to ensure mm is valid in
the scheduled deferred_list_work, and drop the mm referrence after range
is handled.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reported-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The remove_list head was only used for keeping track of existing ranges
that are to be removed from the svms->list. The update_list was used for
new or existing ranges that need updated attributes. These two cases are
mutually exclusive (i.e. the same range will never be on both lists).
Therefore we can use the update_list head to track the remove_list and
save another 16 bytes in the svm_range struct.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are seven list_heads in struct svm_range: list, update_list,
remove_list, insert_list, svm_bo_list, deferred_list, child_list. This
patch and the next one remove two of them that are redundant.
The insert_list head was only used for new ranges that are not on the
svms->list yet. So we can use that list head for keeping track of
new ranges before they get added, and use list_move_tail to move them
to the svms->list when ready.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use max() and min() in order to make code cleaner.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add svm_range_bo_unref_async to schedule work to wait for svm_bo
eviction work done and then free svm_bo. __do_munmap put_page
is atomic context, call svm_range_bo_unref_async to avoid warning
invalid wait context. Other non atomic context call svm_range_bo_unref.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the warnings below, and also drops the display_count
variable, as it's unused.
In function 'svm_range_map_to_gpu':
warning: variable 'bo_va' set but not used [-Wunused-but-set-variable]
1172 | struct amdgpu_bo_va bo_va;
| ^~~~~
...
In function 'dcn201_update_clocks':
warning: variable 'enter_display_off' set but not used [-Wunused-but-set-variable]
132 | bool enter_display_off = false;
| ^~~~~~~~~~~~~~~~~
Changes since v1:
- As suggested by Rodrigo Siqueira:
1. Drop display_count variable.
- As suggested by Felix Kuehling:
1. Remove block surrounding amdgpu_xgmi_same_hive.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If an existing SVM range overlaps an svm_range_set_attr call, we would
normally split it in order to update only the overlapping part.
However, if the attributes of the existing range would not be changed
splitting it is unnecessary.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing function doesn't compare the access bitmaps and flags.
This can result in failure to update those attributes in existing
ranges when all other attributes remained unchanged.
Because the access and flags attributes modify only some bits in the
respective bitmaps, we cannot compare them directly. Instead we need to
check whether applying the attributes to a particular range would
change the bitmaps.
A PREFETCH_LOC attribute must always trigger a migration, even if the
attribute value remains unchanged. E.g. if some pages were migrated due
to a CPU page fault, a prefetch must still be executed to migrate pages
back to VRAM.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add null-pointer check after the last svm_range_new call. This was
originally reported by Zhou Qingyang <zhou1615@umn.edu> based on a
static analyzer.
To avoid duplicating the unwinding code from svm_range_handle_overlap,
I merged the two functions into one.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes various warnings relating to erroneous docstring syntax, of
which some are listed below:
warning: Function parameter or member 'adev' not described in
'amdgpu_atomfirmware_ras_rom_addr'
...
warning: expecting prototype for amdgpu_atpx_validate_functions().
Prototype was for amdgpu_atpx_validate() instead
...
warning: Excess function parameter 'mem' description in 'amdgpu_preempt_mgr_new'
...
warning: Cannot understand * @kfd_get_cu_occupancy - Collect number of
waves in-flight on this device
...
warning: This comment starts with '/**', but isn't a kernel-doc
comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms
and userptr valid/inval list, svm_range_restore_work and
svm_range_set_attr don't access those, so do not need to take
process_info lock. This will avoid potential circular locking issue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To silence the following Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615
svm_range_restore_pages()
warn: missing error code here? 'get_task_mm()' failed. 'r' = '0'
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH ring1 is used to process GPU retry fault, overflow is enabled to
drain retry fault because we want receive other interrupts while
handling retry fault to recover range. There is no overflow flag set
when wptr pass rptr. Use timestamp of rptr and wptr to handle overflow
and drain retry fault.
If fault timestamp goes backward, the fault is filtered and should not
be processed. Drain fault is finished if processed_timestamp is equal to
or larger than checkpoint timestamp.
Add amdgpu_ih_functions interface decode_iv_ts for different chips to
get timestamp from IV entry with different iv size and timestamp offset.
amdgpu_ih_decode_iv_ts_helper is used for vega10, vega20, navi10.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unmap range always increase atomic svms->drain_pagefaults to simplify
both parent range and child range unmap, page fault handle ignores the
retry fault if svms->drain_pagefaults is set to speed up interrupt
handling. svm_range_drain_retry_fault restart draining if another
range unmap from cpu.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VMA may be removed before unmap notifier callback, and deferred list
work remove range, return success for this special case as we are
handling stale retry fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_process_wq_release drain retry fault to ensure no retry fault comes
after removing kfd process from the hash table, otherwise svm page fault
handler will fail to recover the fault and dump GPU vm fault log.
Refactor deferred list work to get_task_mm and take mmap write lock
to handle all ranges, and avoid mm is gone while inserting mmu notifier.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to IP version checking instead of asic_type on various KFD
version checks.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove get_amdgpu_device and other remaining kgd_dev references aside
from declaration/kfd struct entry and initialization.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The check for whether to drain retry faults must be under the mmap write
lock to serialize with munmap notifier callbacks.
We were also missing checks on child ranges. To fix that, simplify the
logic by using a flag rather than checking on each prange. That also
allows draining less freqeuntly when many ranges are unmapped at once.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Alex Sierra <Alex.Sierra@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]:
When we call hmm_range_fault to map memory after a migration, we don't
expect memory to be migrated again as a result of hmm_range_fault. The
driver ensures that all memory is in GPU-accessible locations so that
no migration should be needed. However, there is one corner case where
hmm_range_fault can unexpectedly cause a migration from DEVICE_PRIVATE
back to system memory due to a write-fault when a system memory page in
the same range was mapped read-only (e.g. COW). Ranges with individual
pages in different locations are usually the result of failed page
migrations (e.g. page lock contention). The unexpected migration back
to system memory causes a deadlock from recursive locking in our
driver.
[How]:
Creating a task reference new member under svm_range_list struct.
Setting this with "current" reference, right before the hmm_range_fault
is called. This member is checked against "current" reference at
svm_migrate_to_ram callback function. If equal, the migration will be
ignored.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If some pages fail to migrate to system memory, don't update
prange->actual_loc = 0. This prevents endless CPU page faults after
partial migration failures due to contested page locks.
Migration to RAM must be complete during migrations from VRAM to VRAM and
during evictions. Implement retry and fail if the migration to RAM fails.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stack and heap pages tend to be shared by many small allocations.
Concurrent access by CPU and GPU is therefore likely, which can lead to
thrashing. Avoid this by setting the preferred location to system memory.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The preferred location should be used as the migration destination
whenever it is accessible by the faulting GPU. System memory is always
accessible. Peer memory is accessible if it's in the same XGMI hive.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When creating unregistered new svm range to recover retry fault, avoid
new svm range to overlap with ranges or userptr ranges managed by TTM,
otherwise svm migration will trigger TTM or userptr eviction, to evict
user queues unexpectedly.
Change helper amdgpu_ttm_tt_affect_userptr to return userptr which is
inside the range. Add helper svm_range_check_vm_userptr to scan all
userptr of the vm, and return overlap userptr bo start, last.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No function change, use pr_debug_ratelimited to avoid per page debug
message overflowing dmesg buf and console log.
use dev_err to show error message from unexpected situation, to provide
clue to help debug without enabling dynamic debug log. Define dev_fmt to
output function name in error message.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export svm_range_list_lock_and_flush_work to make other kfd parts be
able to sync svm_range_list.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Avoid conflict with address ranges mapped by SVM
mechanism that try to be allocated again through
ioctl_alloc in the same process. And viceversa.
[How]
For ioctl_alloc_memory_of_gpu allocations
Check if the address range passed into ioctl memory
alloc does not exist already in the kfd_process
svms->objects interval tree.
For SVM allocations
Look for the address range into the interval tree VA from
the VM inside of each pdds used in a kfd_process.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fix the deadlock with the BO reservations during SVM_BO evictions
while allocations in VRAM are concurrently performed. More specific,
while the ttm waits for the fence to be signaled (ttm_bo_wait), it
already has the BO reserved. In parallel, the restore worker might be
running, prefetching memory to VRAM. This also requires to reserve the
BO, but blocks the mmap semaphore first. The deadlock happens when the
SVM_BO eviction worker kicks in and waits for the mmap semaphore held
in restore worker. Preventing signal the fence back, causing the
deadlock until the ttm times out.
We don't need to hold the BO reservation anymore during validation
and mapping. Now the physical addresses are taken from hmm_range_fault.
We also take migrate_mutex to prevent range migration while
validate_and_map update GPU page table.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xnack off, restore work dma unmap previous system memory page, and
dma map the updated system memory page to update GPU mapping, this is
not dma mapping leaking, remove the WARN_ONCE for dma mapping leaking.
prange->dma_addr store the VRAM page pfn after the range migrated to
VRAM, should not dma unmap VRAM page when updating GPU mapping or
remove prange. Add helper svm_is_valid_dma_mapping_addr to check VRAM
page and error cases.
Mask out SVM_RANGE_VRAM_DOMAIN flag in dma_addr before calling amdgpu vm
update to avoid BUG_ON(*addr & 0xFFFF00000000003FULL), and set it again
immediately after. This flag is used to know the type of page later to
dma unmapping system memory page.
Fixes: 1d5dbfe6c0 ("drm/amdkfd: classify and map mixed svm range pages in GPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SVM range may includes multiple VMAs with different vm_flags, if prange
page index is the last page of the VMA offset + npages, update GPU
mapping to create GPU page table with same VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During svm restore pages interrupt handler, kfd_process ref count was
never dropped when xnack was disabled. Therefore, the object was never
released.
Fixes: 2383f56bbe ("drm/amdkfd: page table restore through svm API")
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Restore retry fault or prefetch range, or restore svm range after
eviction to map range to GPU with correct read or write access
permission.
Range may includes multiple VMAs, update GPU page table with offset of
prange, number of pages for each VMA according VMA access permission.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check range access permission to restore GPU retry fault, if GPU retry
fault on address which belongs to VMA, and VMA has no read or write
permission requested by GPU, failed to restore the address. The vm fault
event will pass back to user space.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFDSVMRangeTest.SetGetAttributesTest randomly fails in stress test.
Note: Google Test filter = KFDSVMRangeTest.*
[==========] Running 18 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 18 tests from KFDSVMRangeTest
[ RUN ] KFDSVMRangeTest.BasicSystemMemTest
[ OK ] KFDSVMRangeTest.BasicSystemMemTest (30 ms)
[ RUN ] KFDSVMRangeTest.SetGetAttributesTest
[ ] Get default atrributes
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure
Value of: expectedDefaultResults[i]
Actual: 4294967295
Expected: outputAttributes[i].value
Which is: 0
/home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:152: Failure
Value of: expectedDefaultResults[i]
Actual: 4
Expected: outputAttributes[i].type
Which is: 2
[ ] Setting/Getting atrributes
[ FAILED ]
the root cause is that svm work queue has not finished when svm_range_get_attr is called, thus
some garbage svm interval tree data make svm_range_get_attr get wrong result. Flush work queue before
iterate svm interval tree.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xnack on, if range ACCESS or ACCESS_IN_PLACE (AIP) by single GPU, or
range is ACCESS_IN_PLACE by mGPUs and all mGPUs connection on XGMI same
hive, the best prefetch location is prefetch_loc GPU. Otherwise, the best
prefetch location is always CPU because GPU does not have coherent
mapping VRAM of other GPUs even with large-BAR PCIe connection.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the SVM get_attr call allows querying, which flags are set
in the entire address range. Add the opposite query, which flags are
clear in the entire address range. Both queries can be combined in a
single get_attr call, which allows answering questions such as, "is
this address range coherent, non-coherent, or a mix of both"?
Proposed userspace for UAPI:
https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yand <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang